Toxicity of ionic liquids in marine and freshwater microorganisms and invertebrates: state of the art

Short alkyl-chained Imidazolium-based Ionic Liquids: Promising green solution or potential environmental threat?

Ionic Liquids (ILs) are currently applied in a wide variety of fields, with promising outcomes in microalgae high value biocompounds extraction. The occurrence of these compounds in natural water systems, with their characteristic stability and low biodegradability, becomes a threat worthy of attention. In the present study, Dunaliella tertiolecta, Isochrysis galbana and Rhinomonas reticulata were exposed to 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIM] Tf2N) for 72, 168 and 264 h, at 20 and 25 °C. Obtained results suggest that the N-containing cationic ring in the selected IL could act as a nitrogen source, aiding protein synthesis and growth in the three studied microalgae. Moreover, this specific IL might become a potential eutrophication agent when discharged in aquatic ecosystems, already pressured by climate change conditions. Important lipid contents, mainly in I. galbana and associated with increased cellular energy allocation values, could be related to mitochondrial stress, which is known to be a lipid accumulation promoting factor. Hence, we hypothesise that, since [BMIM] Tf2N does not appear to impair growth or biocompound accumulation, it could be a candidate for microalgae biomass pretreatment in biodiesel production. However, its life cycle and disposal must be carefully considered.

Impact of emerging pollutants mixtures on marine and brackish phytoplankton: diatom Phaeodactylum tricornutum and cyanobacterium Microcystis aeruginosa

Pharmaceuticals and ionic liquids (ILs) are emerging as significant micropollutants with environmental presence and potential ecological impacts. The possible simultaneous occurrence of these two groups of pollutants in aquatic environments raises complex challenges due to their diverse chemical properties and potential for interactive effects. Given the documented widespread presence of pharmaceuticals and the emerging concerns about ILs, the study aims to evaluate the adverse effects of binary mixtures of imidazolium ionic liquid IM1-8C(CN)3 and two representatives of pharmaceuticals: antibiotic oxytetracycline (OXTC) and metabolite carbamazepine 10,11 epoxide (CBZ-E) on the brackish cyanobacterium Microcystis aeruginosa and the marine diatom Phaeodactylum tricornutum during chronic exposure experiments. A comprehensive approach was employed, incorporating various endpoints including oxidative stress, chlorophyll a fluorescence, detailed photoprotective and photosynthetic pigment profiles of target microorganisms to assess modes of action and identify the mixture effects of the selected substances. The observed alterations in pigment production affecting carotenoids synthesis in both selected species may be attributed to the differential impacts of these substances on the photosynthetic pathways and metabolic processes in the cyanobacterial and diatom cells. Changes in chlorophyll a fluorescence-specific parameters suggest impairment of the photosynthetic activity, particularly affecting the efficiency of photosystem II. The application of Concentration Addition (CA) and Independent Action (IA) mathematical models, complemented by the evaluation of Model Deviation Ratios (MDR), revealed predominantly antagonistic interactions within the studied mixtures. The findings of this study provide important insights into the effects of mixtures of organic micropollutants and their potential impact on environment including brackish and marine waters.

Enhanced nanocellulose extraction from date palm waste: green solvent hydrolysis with transition metal complex

This study presents a novel method for nanocellulose production using [Bmim]Cl as a green solvent, with enhanced hydrolysis efficiency achieved through the addition of a transition metal complex as a catalyst. The redox capability of the transition metal complex to break the glycosidic bonds in cellulose is amplified by the addition of an oxidizing agent. This protocol represents the latest innovation in the field of nanocellulose production, resulting in improved yield and reduced particle size. Nanocellulose (NC) was extracted from date seeds using 1-butyl-3-methylimidazolium chloride [Bmim]Cl coupled with a transition metal complex comprising copper metal and pyridine as a ligand along withH 2 O 2 as an oxidizing agent. Unlike conventional [Bmim]Cl hydrolysis, which typically yields only microcrystalline cellulose (MCC), this approach resulted in a 25% higher yield of NC than that of MCC. Dynamic light scattering analysis showed a substantial reduction in hydrodiameter from 1200 nm for MCC to 128.7 nm for NC, highlighting the remarkable efficiency of this process. Thermal analysis demonstrated the high stability of NC, which showed a T onset of 286 °C and an activation energy ( E a ) of 220.41 kJ/mol. X-ray diffraction analysis indicated that NC possessed a high degree of crystallinity (C rl = 70.28%). Furthermore, NC underwent modification with 3-aminopropyltriethoxysilane to replace free hydroxyl groups (-OH), making it redispersal and suitable for various applications. This modification was confirmed through Fourier transform infrared spectroscopy, which showed the presence of characteristic functional groups, and energy-dispersive X-ray spectroscopy, which verified the elemental composition. Zeta potential measurements revealed surface charge differences, with MCC at - 27.87 mV, NC at - 27.28 mV, and modified NC at - 44.72 mV, indicating improved colloidal stability after modification. These findings highlight the protocol's effectiveness and its potential impact on the NC production industry, offering improved yields and the production of nanosized fibers using green solvents.

Mechanisms of cytotoxicity in six classes of ionic liquids: Evaluating cell cycle impact and genotoxic and apoptotic effects

Ionic liquids (ILs), earlier praised for their eco-friendliness, have emerged as key chemicals in advancing green chemistry, catalysis, solvent development, and more. However, the discovery of their notable toxicity has led to a controversial reputation of ILs and has shifted the research landscape towards understanding their biological impacts. The present study examines the mechanism of cytotoxicity of 32 ILs across six classes, highlighting their effects on the cell cycle of the Jurkat cell line. Focusing on five ILs with pronounced cytotoxicity, we uncover their genotoxic effects and their role in inducing apoptosis. Our findings suggest intricate interplay between the extrinsic and intrinsic apoptotic pathways at different time points after exposure to ILs. Moreover, the ILs studied displayed marked genotoxicity, likely stemming from the accumulation of double-strand DNA breaks in the Jurkat cells. This investigation offers a comprehensive view on interactions of ILs with eukaryotic cells, thereby providing new guidelines for developing safer pharmaceutical and industrial applications of these chemicals. The results not only broaden and enhance the previous perceptions but also open new avenues in research, emphasizing the dual potential of ILs in innovation and safety, and marking a significant step towards integrating chemical innovations with biological safety.

An innovative mixture sampling strategy with uniform design: Application to global sensitivity analysis of mixture toxicity

Global sensitivity analysis combined with quantitative high-throughput screening (GSA-qHTS) uses random starting points of the trajectories in mixture design, which may lead to potential contingency and a lack of representativeness. Moreover, a scenario in which all factor levels were at stimulatory effects was not considered, thereby hindering a comprehensive understanding of GSA-qHTS. Accordingly, this study innovatively introduced an optimised experimental design, uniform design (UD), to generate non-random and representative sample points with smaller uniformity deviation as starting points of multiple trajectories. By combining UD with the previously optimised one-factor-at-a-time (OAT) method, a novel mixture design method was developed (UD-OAT). The single toxicity tests showed that three pyridinium and five imidazolium ionic liquids (ILs) exerted stimulatory effects on Vibrio qinghaiensis sp.-Q67; thus, four stimulatory effective concentrations of each IL were selected as factor levels. The UD-OAT generated 108 mixture samples with equal frequency and without repetition. High-throughput microplate toxicity analysis revealed that all 108 mixtures exhibited inhibitory effects. Among these, type B mixtures exhibited increasing toxicities that subsequently decreased, unlike type C mixtures, which consistently increased over time. GSA successfully identified three of the eight ILs as important factors influencing the toxicities of the mixtures. When individual ILs produced stimulatory effects, mixtures containing two to three ILs exhibited either stimulatory effects or none. In contrast, mixtures containing five to eight ILs exhibited inhibitory effects, while those containing four ILs showed a transition from stimulatory to inhibitory effects. This study provides a novel mixture design method for studying mixture toxicity and fills the application gap of GSA-qHTS. The phenomenon of individuals being beneficial while mixtures can be harmful challenges traditional mixture risk assessments.

Subcellular effects of imidazolium-based ionic liquids with varying anions on the marine bivalve Mytilus galloprovincialis

Green Chemistry involves applying a set of principles aimed at minimizing the use of hazardous substances in the design, production, and application of chemical products. In recent decades, Ionic Liquids (ILs) have emerged as more environmentally friendly substitutes for traditional organic solvents. This preference is primarily due to their low vapor pressure, which results in minimal atmospheric pollution and enhanced industrial safety. However, existing literature highlights the toxicity of ILs towards aquatic invertebrates. Consequently, this study points to assess the biochemical effects of a selection of ILs through an in vitro approach. Specifically, digestive gland and gill cellular fractions (S9) of the marine bivalve Mytilus galloprovincialis were exposed to varying concentrations (0.05-2 μM) of three ILs featuring identical cations but different anions. The ILs tested were 1-ethyl-3-methylimidazolium octanoate ([EMIM][Oct]), 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]), and 1-ethyl-3-methylimidazolium ethyl sulfate ([EMIM][EtSO4]). The results indicate that [EMIM][Oct] induces higher toxicity in both S9 tissues, highlighting a strong effect of the anion. Overall, antioxidant and biotransformation defenses were significantly altered for all three ILs assessed. While acetylcholinesterase activity was significantly inhibited of about half of control activity, indicating neurotoxic damage as part of the toxicity mode of action of these ILs, neither lipid peroxidation nor alterations to DNA integrity were observed (≥100 %). This study supports the use of in vitro techniques as important tools capable of generating reliable ecotoxicological data, which can be further considered as a screening before in vivo testing and used for in silico modeling.

Ionic Liquid-Based Immunization Patch for the Transdermal Delivery of Antigens

Herein, we report a transdermal patch prepared using an ionic liquid-based solid in oil (IL-S/O) nanodispersion and a pressure-sensitive adhesive (PSA) to deliver the macromolecular antigenic protein, ovalbumin (OVA). The IL-S/O nanodispersion and a PSA were first mixed at an equal weight ratio, then coated onto a release liner, and covered with a support film. To evaluate the effect of the PSA, three types of PSAs, DURO-TAK 87-4098, DURO-TAK 87-4287, and DURO-TAK 87-235A, were used to obtain the corresponding IL-S/O patches SP-4098, SP-4287, and SP-235A, respectively. The prepared IL-S/O patches were characterized for surface morphology, viscoelasticity, and moisture content. In vitro skin penetration and in vivo immunization studies of the IL-S/O patches were performed using Yucatan micropig skin and the C57BL/6NJc1 mice model, respectively. The SP-4098 and SP-4287 delivered 5.49-fold and 5.47-fold higher amounts of drug compared with the aqueous formulation. Although both patches delivered a similar amount of drug, SP-4287 was not detached fully from the release liner after 30 days, indicating low stability. Mice immunized with the OVA-containing SP-4098 produced a 10-fold increase in anti-OVA IgG compared with those treated with an aqueous formulation. These findings suggested that the IL-S/O patch may be a good platform for the transdermal delivery of antigen molecules.

Mechanisms of Biological Effects of Ionic Liquids: From Single Cells to Multicellular Organisms

The review presents a detailed discussion of the evolving field studying interactions between ionic liquids (ILs) and biological systems. Originating from molten salt electrolytes to present multiapplication substances, ILs have found usage across various fields due to their exceptional physicochemical properties, including excellent tunability. However, their interactions with biological systems and potential influence on living organisms remain largely unexplored. This review examines the cytotoxic effects of ILs on cell cultures, biomolecules, and vertebrate and invertebrate organisms. Our understanding of IL toxicity, while growing in recent years, is yet nascent. The established findings include correlations between harmful effects of ILs and their ability to disturb cellular membranes, their potential to trigger oxidative stress in cells, and their ability to cause cell death via apoptosis. Future research directions proposed in the review include studying the distribution of various ILs within cellular compartments and organelles, investigating metabolic transformations of ILs in cells and organisms, detailed analysis of IL effects on proteins involved in oxidative stress and apoptosis, correlation studies between IL doses, exposure times and resulting adverse effects, and examination of effects of subtoxic concentrations of ILs on various biological objects. This review aims to serve as a critical analysis of the current body of knowledge on IL-related toxicity mechanisms. Furthermore, it can guide researchers toward the design of less toxic ILs and the informed use of ILs in drug development and medicine.

Solvation of Model Biomolecules in Choline-Aminoate Ionic Liquids: A Computational Simulation Using Polarizable Force Fields

One can foresee a very near future where ionic liquids will be used in applications such as biomolecular chemistry or medicine. The molecular details of their interaction with biological matter, however, are difficult to investigate due to the vast number of combinations of both the biological systems and the variety of possible liquids. Here, we provide a computational study aimed at understanding the interaction of a special class of biocompatible ionic liquids (choline-aminoate) with two model biological systems: an oligopeptide and an oligonucleotide. We employed molecular dynamics with a polarizable force field. Our results are in line with previous experimental and computational evidence on analogous systems and show how these biocompatible ionic liquids, in their pure form, act as gentle solvents for protein structures while simultaneously destabilizing DNA structure.

A machine learning-based QSAR model reveals important molecular features for understanding the potential inhibition mechanism of ionic liquids to acetylcholinesterase

The broad application of ionic liquids (ILs) has been hindered by uncertainties surrounding their ecotoxicity. In this work, a Quantitative Structure-Activity Relationship (QSAR) model was devised to predict the inhibition of ILs towards the activity of AChE, employing both Random Forest (RF) and eXtreme Gradient Boosting (XGBoost) machine learning approaches. Fourteen kings of essential molecular feature descriptors were screened from an initial roster of 244 descriptors through the application of a feature importance index and they showed a significant impact on the activity of AChE activity. The two models based solely on the 14 most critical molecular descriptors could maintain model's robustness and reliability. The correlation analysis between these 14 descriptors and the inhibition of AChE activity revealed the potential impact of the molecular characteristics on ILs toxicity. The results underscored the main influence of cations in ILs on the inhibitory activity towards the AChE enzyme. Specifically, cations exhibiting hydrophobicity properties were found to exert more potent inhibitory effects on the AChE enzyme. In addition, some other properties of the cations, such as the degree of branching, atomic weight and partial charge also modulated their inhibition potential. This study enhances the comprehension of the structure-activity relationship between ILs and AChE inhibition, providing a reference for designing safer and greener ILs.

The Imidazolium Ionic Liquids Toxicity is Due to Their Effect on the Plasma Membrane

Ionic liquids (ILs) are organic salts with a low melting point. This is due to the fact that their alkyl side chains, which are covalently connected to the ion, hinder the crystallization of ILs. The low melting point of ILs has led to their widespread use as relatively harmless solvents. However, ILs do have toxic properties, the mechanism of which is largely unknown, so identifying the cellular targets of ILs is of practical importance. In our work, we showed that imidazolium ILs are not able to penetrate model membranes without damaging them. We also found that inactivation of multidrug resistance (MDR) pumps in yeast cells does not increase their sensitivity to imidazolium ILs. The latter indicates that the target of toxicity of imidazolium ILs is not in the cytoplasm. Thus, it can be assumed that the disruption of the barrier properties of the plasma membrane is the main reason for the toxicity of low concentrations of imidazolium ILs. We also showed that supplementation with imidazolium ILs restores the growth of cells with kinetically blocked glycolysis. Apparently, a slight disruption of the plasma membrane caused by ILs can, in some cases, be beneficial for the cell.

Ecotoxicology Evaluation of a Fenton-Type Process Catalyzed with Lamellar Structures Impregnated with Fe or Cu for the Removal of Amoxicillin and Glyphosate

Antibiotics and pesticides, as well as various emerging contaminants that are present in surface waters, raise significant environmental concerns. Advanced oxidation processes, which are employed to eliminate these substances, have demonstrated remarkable effectiveness. However, during the degradation process, by-products that are not completely mineralized are generated, posing a substantial risk to aquatic ecosystem organisms; therefore, it is crucial to assess effluent ecotoxicity following treatment. This study aimed to assess the toxicity of effluents produced during the removal of amoxicillin and glyphosate with a Fenton-type process using a laminar structure catalyzed with iron (Fe) and copper (Cu). The evaluation included the use of Daphnia magna, Selenastrum capricornutum, and Lactuca sativa, and mutagenicity testing was performed using strains TA98 and TA100 of Salmonella typhimurium. Both treated and untreated effluents exhibited inhibitory effects on root growth in L. sativa, even at low concentrations ranging from 1% to 10% v/v. Similarly, negative impacts on the growth of algal cells of S. capricornutum were observed at concentrations as low as 0.025% v/v, particularly in cases involving amoxicillin-copper (Cu) and glyphosate with copper (Cu) and iron (Fe). Notably, in the case of D. magna, mortality was noticeable even at concentrations of 10% v/v. Additionally, the treatment of amoxicillin with double-layer hydroxides of Fe and Cu resulted in mutagenicity (IM ≥ 2.0), highlighting the necessity to treat the effluent further from the advanced oxidation process to reduce ecological risks.

In vitro screening of imidazolium and pyrrolidinium based ionic liquids toxicity on subcellular fractions of the Mediterranean mussel Mytilus galloprovincialis

Ionic liquids (ILs) have been considered eco-friendly alternatives to conventional organic solvents. However, several studies have reported that ILs exert toxicity towards aquatic invertebrates. Applying in vitro methodology, the aim of the present study was to evaluate the potential effect of three ILs on the biochemical performance of exposed Mytilus galloprovincialis digestive gland and gills cellular fractions. Carboxylesterase might be involved in the derived toxicity mechanism of ILs as activity levels increased significantly in digestive gland exposed fractions. This group of ILs did not seem to induce genotoxicity, except in gills cellular fractions exposed to 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. In the literature, in vitro methodology has been suggested as an important complement to animal testing and in silico studies. The present research underlines its efficacy as a quick pre-screening before in vivo testing, particularly with heterogenic groups of substances with high variability in composition, such as ILs and deep eutectic solvents.

Removal of mercury by silica-supported ionic liquids: Efficiency and ecotoxicological assessment

Anthropogenic impacts have affected the coastal environment and contributed to its contamination. Mercury (Hg) is widespread in nature and has been shown to be toxic in even the smallest amounts, negatively affecting not only the marine ecosystem but also the entire trophic chain due to its biomagnification. Mercury ranks third on the Agency for Toxic Substances and Diseases Registry (ATSDR) priority list and it is therefore imperative to develop more effective methods than those currently available to avoid the persistence of this contaminant in aquatic ecosystems. The present study aimed to evaluate the effectiveness of six different silica-supported ionic liquids (SIL) in removing Hg from contaminated saline water, under realistic conditions ([Hg] = 50 µg/L), and to ecotoxicologically evaluate the safety of the SIL-remedied water, using as test model the marine macroalga Ulva lactuca. The results revealed that SIL [Si][C3C1im][SCN] (250 mg/L) was the most effective in removing Hg from solution, with a efficiency up to 99 % in just 6 h, that enable to obtain < 1 µg/L Hg (European guideline in drinking water). U. lactuca exposed to either the SIL and/or the remedied water showed no significant changes in relative growth rate and chlorophyll a and b levels, compared to the control condition. Biomarker analysis (LPO, GSH, GSSG, SOD, GPx, CAT and GRed) also showed no significant changes in the biochemical performance of U. lactuca. Therefore, it could be assumed that water treatment with SIL or its presence in an aqueous environment does not pose toxicity levels that could inhibit the metabolism or cause cell damage to U. lactuca.

Recent Advances in Biocompatible Ionic Liquids in Drug Formulation and Delivery

The development of effective drug formulations and delivery systems for newly developed or marketed drug molecules remains a significant challenge. These drugs can exhibit polymorphic conversion, poor bioavailability, and systemic toxicity, and can be difficult to formulate with traditional organic solvents due to acute toxicity. Ionic liquids (ILs) are recognized as solvents that can improve the pharmacokinetic and pharmacodynamic properties of drugs. ILs can address the operational/functional challenges associated with traditional organic solvents. However, many ILs are non-biodegradable and inherently toxic, which is the most significant challenge in developing IL-based drug formulations and delivery systems. Biocompatible ILs comprising biocompatible cations and anions mainly derived from bio-renewable sources are considered a green alternative to both conventional ILs and organic/inorganic solvents. This review covers the technologies and strategies developed to design biocompatible ILs, focusing on the design of biocompatible IL-based drug formulations and delivery systems, and discusses the advantages of these ILs in pharmaceutical and biomedical applications. Furthermore, this review will provide guidance on transitioning to biocompatible ILs rather than commonly used toxic ILs and organic solvents in fields ranging from chemical synthesis to pharmaceutics.