Time-dependent hormesis transfer from five high-frequency personal care product components to mixtures

There is potential for personal care products (PCPs) components and mixtures to induce hormesis. How hormesis is related to time and transmitted from components to mixtures are not clear. In this paper, we conducted determination of components in 16 PCP products and then ran frequent itemset mining on the component data. Five high-frequency components (HFCs), betaine (BET), 1,3-butanediol (BUT), ethylenediaminetetraacetic acid disodium salt (EDTA), glycerol (GLO), and phenoxyethanol (POE), and 14 mixtures were identified. For each mixture system, one mixture ray with the actual mixture ratios in the products was selected. Time-dependent microplate toxicity analysis was used to test the luminescence inhibition toxicity of five HFCs and 14 mixture rays to Vibrio qinghaiensis sp.-Q67 at 12 concentration gradients and eight exposure times. It is showed that BET, EDTA, POE, and 13 mixture rays containing at least one J-type component showed time-dependent hormesis. Characteristic parameters used to describe hormesis revealed that the absolute value of the maximum stimulatory effect (|Emin|) generally increased with time. Notably, mixtures composed of POE and S-type components showed greater |Emin| than POE alone at the same time. Importantly, the maximum stimulatory effective concentration, NOEC/the zero effective concentration point, and EC50 remained relatively stable. Nine hormesis transmission phenomena were observed in different mixture rays. While all mixtures primarily exhibited additive action, varying degrees of synergism and antagonism were noted in binary mixtures, with no strong synergism or antagonism observed in ternary and quaternary mixtures. These findings offer valuable insights for the screening of HFCs and their mixtures, as well as the study of hormesis transmission in personal care products.

Time-dependent nonmonotonic concentration-response and synergism of alkyl glycosides with different alkyl side chain to Vibrio qinghaiensis sp. -Q67

Alkyl glycosides (AGs), commonly used nonionic surfactants, may have toxic effects on the environmental organisms. However, the complex concentration-response patterns of AGs with varying alkyl side chains and their mixtures have not been thoroughly studied. Therefore, the luminescence inhibition toxicities of six AGs with different alkyl side chains, namely, ethyl (AG02), butyl (AG04), hexyl (AG06), octyl (AG08), decyl (AG10), and dodecyl (AG12) glucosides, were determined in Vibrio qinghaiensis sp. -Q67 (Q67) at 0.25, 3, 6, 9, and 12 h. The six AGs exhibited time- and side-chain-dependent nonmonotonic concentration- responses toward Q67. AG02, with a short side chain, presented a concentration-response curve (CRC) with two peaks after 6 h and stimulated the luminescence of Q67 at both 6 and 9 h. AG04, AG06, and AG08 showed S-shaped CRCs at five exposure time points, and their toxicities increased with the side-chain length. AG10 and AG12, with long side chains, exhibited hormesis at 9 and 12 h. Molecular docking was performed to explore the mechanism governing the possible influence of AGs on the luminescence response. The effects of AGs on Q67 could be attributed to multiple luminescence-regulatory proteins, including LuxA, LuxC, LuxD, LuxG, LuxI, and LuxR. Notably, LuxR was identified as the primary binding protein among the six AGs. Given that they may co-exist, binary mixtures of AG10 and AG12 were designed to explore their concentration-response patterns and interactions. The results revealed that all AG10-AG12 binary mixture rays showed time-dependent hormesis on Q67, similar to that shown by their individual components. The interactions of these binary mixtures were mainly characterized by low-concentration additive action and high-concentration synergism at different times.

A novel mixture sampling strategy combining latin hypercube sampling with optimized one factor at a time method: A case study on mixtures of antibiotics and pesticides

Global sensitivity analysis in conjunction with quantitative high-throughput screening presents a novel technique for identifying the key components that induce the toxicities of mixtures. However, the mixtures currently designed with this method suffer from unequal frequency sampling, repeated mixtures, and only odd factor levels being considered. Accordingly, we use latin hypercube sampling to generate the starting points of the trajectories to achieve equal frequency sampling and non-repeated mixtures, as well as apply different one factor at a time methods for factors with odd and even levels to achieve suitability for factors with both odd and even levels. This method is called LHS-OAT. LHS-OAT was successfully applied to design 110 equal-frequency and non-repeated mixtures consisting of six antibiotics and four pesticides. It was found that four factors, roxithromycin (A5), tetracycline (A6), dichlorvos (P1), and demeton-S (P3), induce the toxicities of mixtures, and A5 and P1 in the Shaying River Basin have risk quotients ≥ 1. Additionally, we developed the toxicity deviation ratio to correct the risk quotients of interacting mixtures for effective risk assessments. This study provides a rational and effective method for mixture design that accurately identifies the important factors that induce the toxicities of mixtures.

Beneficial or harmful: Time-dependent hormesis induced by typical disinfectants and their mixtures with toxicological interaction

Disinfectants and their mixtures can induce hormesis. However, how the mixture hormesis is related to those of components and the interactions in disinfectant mixtures remain unclear. In this paper, the luminescence inhibition toxicities of chlorinated sodium phosphate (CSP), dodecyl dimethyl benzyl ammonium bromide (DOB), dodecyl dimethyl benzyl ammonium chloride (DOC), ethanol (EtOH), glutaraldehyde (GLA), hydrogen peroxide (H2O2), isopropyl alcohol (IPA), n-propanol (NPA), and 20 mixture rays in four mixture systems (EtOH-H2O2, DOB-H2O2, DOC-EtOH, and EtOH-IPA-NPA) containing at least one component showing hormesis to Vibrio qinghaiensis sp.-Q67 (Q67) were determined at 0.25, 3, 6, 9, and 12 h. The synergism-antagonism heatmap based on independent action model (noted as SAHmapIA) was developed to systematically evaluate the interactions in various mixtures. It was shown that five disinfectants (CSP, EtOH, H2O2, NPA, and IPA) and 17 mixture rays exhibited time-dependent hormesis. The hormetic component was responsible for the hormesis of the mixture rays. Most mixture rays showed low- concentration/dose additive action and high-concentration/dose synergism at different time. This study further exemplified the interrelationship between the hormesis in the mixtures and their components and implied the need to pay attention to the time-dependent hormesis and interactions induced by the disinfectants.

Time-dependent hormetic dose responses of skin care product mixtures to Vibrio qinghaiensis sp.-Q67: Appearance and quantification

Hormesis is a widely recognized and extensively studied phenomenon. However, few studies have described the quantitative characteristics of hormesis required for appropriate risk assessment. Although skin care product (SCP) mixtures and their active ingredients can induce the hormesis of Vibrio qinghaiensis sp.-Q67 (Q67), the quantitative characteristics of time-dependent hormetic dose responses in SCPs have not yet been investigated. In this study, 28 SCP mixtures were tested for luminescence toxicity against Q67 after five exposure durations (0.25, 3, 6, 9, and 12 h). With increasing exposure duration, the concentration response curves (CRCs) were classified as constant monotonic nonlinear (S-shaped) for four SCPs, S- to hormetic (J-shaped) for 13 SCPs, and constant J-shaped for 11 SCPs. Of 140 CRCs, 98 were J-shaped. An increased frequency of SCPs inducing hormesis was observed. The toxicity (pEC50) of the SCPs was independent of the exposure duration and product type. The maximum stimulatory effect (Emin) of the 12 SCPs increased with exposure duration. We proposed a modified parameter, the width of inhibition dose zone (WIDZ; EC50/EC10), to depict the width of inhibition dose zone. The WIDZ of S-shaped CRCs were significantly larger than that of J-shaped CRCs. In addition, the characteristic parameters reported in the general literature were analyzed. The good linear relationship between EC50 and the maximum stimulatory effective concentration (ECmin) indicated that toxicity may be transformed into stimulatory effects over exposure durations. The width of stimulation dose zone (WSDZ) and Emin of the seven SCPs had the same increasing trends with increasing exposure duration. The combination of WIDZ with other characteristic parameters (e.g., zero effective concentration point, ECmin, etc.) could better depict hormesis with low-dose stimulation and high-dose inhibition. The quantitative characteristics of the dose-responses of hormesis-inducing SCPs could provide reference basis for the risk assessment of SCP mixtures.

Study on the characterization of pesticide modes of action similarity and the multi-endpoint combined toxicity of pesticide mixtures to Caenorhabditis elegans

With the widespread use of pesticides, the coexistence of multiple low-residue pesticides in environmental media has increased significantly, and the "cocktail" effect caused by this phenomenon has garnered increasing attention. However, owing to the scarcity of information regarding the modes of action (MOAs) of chemicals, the application of concentration addition (CA) models for evaluating and predicting the toxicity of mixture with similar MOAs is limited. Additionally, the joint toxicity laws of complex mixture systems to different toxicity endpoints in organisms remain unclear, and effective methods to test the mixture toxicity on lifespan and reproductive inhibition are lacking. Therefore, in this study, the similarity of pesticide MOAs was characterized using molecular electronegativity-distance vector (MEDV-13) descriptors based on eight pesticides (aldicarb, methomyl, imidacloprid, thiamethoxam, dichlorvos, dimethoate, methamidophos and triazophos). Additionally, the methods of lifespan and reproduction inhibition microplate toxicity analysis of elegans (EL-MTA and ER-MTA) were established to test the lifespan and reproduction inhibition toxicity of Caenorhabditis elegans. Finally, a unified scale synergistic-antagonistic heatmap (SAHscale) method was proposed to explore the combined toxicity of the mixtures on the lifespan, reproduction, and mortality of nematodes. The results showed that the MEDV-13 descriptor could effectively characterize the similarity in MOAs. The lifespan and reproductive ability of Caenorhabditis elegans were significantly inhibited when the pesticide exposure concentration was one order of magnitude lower than the lethal dose. The sensitivity of lifespan and reproductive endpoints to mixtures was dependent on the concentration ratio. The same rays in the mixture had consistent toxicity interactions on the lifespan and reproductive endpoints of Caenorhabditis elegans. In conclusion, we demonstrated the feasibility of MEDV-13 in characterizing the similarity of MOAs, and provided a theoretical basis for exploring the mechanism of chemical mixtures by studying their apparent toxicity of mixtures on nematode lifespan and reproduction endpoints.

A novel equal frequency sampling of factor levels (EFSFL) method is applied to identify the dominant factor inducing the combined toxicities of 13 factors

The research framework combining global sensitivity analysis (GSA) with quantitative high-throughput screening (qHTS), called GSA-qHTS, provides a potentially feasible way to screen for important factors that induce toxicities of complex mixtures. Despite its value, the mixture samples designed using the GSA-qHTS technique still have a shortage of unequal factor levels, which leads to an asymmetry in the importance of elementary effects (EEs). In this study, we developed a novel method for mixture design that enables equal frequency sampling of factor levels (called EFSFL) by optimizing both the trajectory number and the design and expansion of the starting points for the trajectory. The EFSFL has been successfully employed to design 168 mixtures of 13 factors (12 chemicals and time) that each have three levels. By means of high-throughput microplate toxicity analysis, the toxicity change rules of the mixtures are revealed. Based on EE analysis, the important factors affecting the toxicities of the mixtures are screened. It was found that erythromycin is the dominant factor and time is an important non-chemical factor in mixture toxicities. The mixtures can be classified into types A, B, and C mixtures according to their toxicities at 12 h, and all the types B and C mixtures contain erythromycin at the maximum concentration. The toxicities of the type B mixtures increase firstly over time (0.25 ∼ 9 h) and then decrease (12 h), while those of the type C mixtures consistently increase over time. Some type A mixtures produce stimulation that increases with time. With the present new approach to mixture design, the frequency of factor levels in mixture samples is equal. Consequently, the accuracy of screening important factors is improved based on the EE method, providing a new method for the study of mixture toxicity.

Quasi-isentropic compression of LiH above 400 GPa using magnetocumulative generator

The knowledge of high-pressure behavior of LiH is significant for the validation of fundamental theoretical models and applications in thermonuclear materials and potential energy supplies. The compressibility of ⁷LiH under isentropic compression at high pressure was investigated experimentally and theoretically. The experimental technique for quasi-isentropic compression with low-density materials was developed using the magnetocumulative generator CJ-100 and x-ray flash radiography. The x-ray images and extracted interface of the sample target in dynamic flash radiography experiments were obtained. According to each interface size of the target both before and after compression, the compression ratio of ⁷LiH and reference material aluminum was obtained. The density of the reference and using its known isentropic curve provide the pressure in the reference. The pressure in ⁷LiH was deduced from the pressure in the reference and using the calculated gradient correction factor. The quasi-isentropic data point at 438 GPa was obtained experimentally. A semiempirical three-term complete equation of state was constructed and validated for ⁷LiH using the theory of Mie-Grüneisen-Debye with experimental data from the literature. The quasi-isentrope data point is reasonably consistent with the theoretical results. The quasi-isentropic experimental techniques and results broaden the existing research scope and are practical and helpful to further validate theoretical models in the future.

[Causes and management of frontal sinusitis after transfrontal craniotomy]

Objective:The aim of this study is to investigate the causes and the strategy of frontal sinusitis after transfrontal craniotomy by endoscopic frontal sinus surgery and traditional surgery with facial incision. Method:A total of thirty-four patients with frontal sinusitis after transfrontal craniotomy were admitted, with the symptom of purulence stuff, headache and upper eyelid discharging. The onset time was 2.6 years on average. The frontal sinus CT and MRI images showed frontal sinusitis. Twenty-seven patients were treated with endoscopic frontal sinus surgery, and seven patient was treated with combined endoscopic and traditional frontal sinus surgery. In the revision surgery, the bone wax and inflammatory granulation tissue were cleaned out in both operational methods. The cure standard was that the postoperative frontal sinus inflammation disappeared and the drainage of the volume recess was unobstructed. Result:Thirty-four patients had a history of transfrontal craniotomy, and there was a record of bone wax packing in every operation. Among twenty-seven patients with endoscopic frontal sinus surgery, Twenty-five cases cured and two cases were operated twice. Seven patients were cured with combined endoscopic and traditional frontal sinus surgery. Conclusion:The frontal sinusitis after transfrontal craniotomy may be related to the inadequate sinus management, especially bone wax to be addressed to the frontal sinus ramming leading to frontal sinus mucosa secretion obstruction and poor drainage. Endoscopic frontal sinus surgery is a way of minimally invasive surgery. The satisfying curative effect can be obtained by endoscopic removal of bone wax, inflammatory granulation tissue, and the enlargement of frontal sinus aperture after exposure to the frontal sinus, and some cases was treated with both operation method.

Synthesis of Biocompatible Polymers with Aspirin-Moieties for Aspirin Delivery

Polyacrylate and polyhydroxylate polymers with aspirin moieties were prepared. The acrylate polymers were obtained by the synthesis and poly merization of several new monomers; β-(acetylsalicylyloxy)ethy methacrylate, β-(acetylsalicylyloxy)propyl methacrylate, β-(acetylsalicylyloxy)ethy acrylate, β-hydroxy-γ-(acetylsalicylyloxy)ethyl methacrylate and β-hydroxy-γ-(acetylsali cylyloxy)propyl methacrylate. The second series of biocompatible polymers with aspirin moieties was prepared by reacting the hydroxyl group of poly(vinyl alcohol) and poly(allyl alcohol) with 1-(acetylsalicylyl)benzotriazole. Both the homogeneous and heterogeneous hydrolysis of eight biocompatible polymers and copolymer with aspirin moieties were investigated in acidic or alkaline medium at 37 ° C or 60 °C, respectively. The main hydrolysis product was aspi rin with minor amounts of salicylic acid. The release rates of aspirin and sali cylic acid were related to the hydrolysis temperature, and the length of side chain. The release rate of aspirin and salicylic acid from poly[1-(acetylsalicylyl oxy)ethyl methacrylate-co-methacrylic acid] is markedly dependent on polymer composition and the pH value of hydrolysis medium.

Intracellular pH-induced fluorescence used to track nanoparticles in cells

A nanoparticle with pH-induced fluorescence was reported for intracellular tracking. The fluorescence was evoked by the isomerization of the ring-closed form spiropyran (SP) to the ring-open form merocyanine (MC) in the weak acidic environment of cells. The SP-MC switch accelerated the dissociation of nanoparticles to trigger the release of trapped paclitaxel.

Controllable preparation of ternary superparamagnetic nanoparticles dual-doped with Mn and Zn elements

Superparamagnetic iron oxide nanoparticles (SPIONs) with high saturation magnetization are successfully synthesized via thermal decomposition method by doping Mn and Zn elements simultaneously. The synthesis procedure was modified according to the thermal stabilities of the precursors, in order to ensure that the stoichiometry of the synthesized samples can be retained exactly from the starting ratios of the Fe/Mn/Zn in the initial precursors. As a result, the saturation magnetization of the dual-doped nanoparticles increased about 23% compared to that without the dopants. The superparamagnetic nanoparticles had narrow size distribution and the average diameter was about 8 nm. XRD and HRTEM analyses also indicated that the materials had a cubic spinel structure.

Facile synthesis of monodisperse superparamagnetic Fe3O4/PMMA composite nanospheres with high magnetization

Monodisperse superparamagnetic Fe(3)O(4)/polymethyl methacrylate (PMMA) composite nanospheres with high saturation magnetization were successfully prepared by a facile novel miniemulsion polymerization method. The ferrofluid, MMA monomer and surfactants were co-sonicated and emulsified to form stable miniemulsion for polymerization. The samples were characterized by DLS, TEM, FTIR, XRD, TGA and VSM. The diameter of the Fe(3)O(4)/PMMA composite nanospheres by DLS was close to 90 nm with corresponding polydispersity index (PDI) as small as 0.099, which indicated that the nanospheres have excellent homogeneity in aqueous medium. The TEM results implied that the Fe(3)O(4)/PMMA composite nanospheres had a perfect core-shell structure with about 3 nm thin PMMA shells, and the core was composed of many homogeneous and closely packed Fe(3)O(4) nanoparticles. VSM and TGA showed that the Fe(3)O(4)/PMMA composite nanospheres with at least 65% high magnetite content were superparamagnetic, and the saturation magnetization was as high as around 39 emu g(-1) (total mass), which was only decreased by 17% compared with the initial bare Fe(3)O(4) nanoparticles.

Functionalized amphiphilic hyperbranched polymers for targeted drug delivery

Amphiphilic hyperbranched core-shell polymers with folate moieties as the targeting groups were synthesized and characterized. The core of the amphiphilic polymers was hyperbranched aliphatic polyester Boltorn H40. The inner part and the outer shell of the amphiphilic polymers were composed of hydrophobic poly(epsilon-caprolactone) segments and hydrophilic poly(ethylene glycol) (PEG) segments, respectively. To achieve tumor cell targeting property, folic acid was further incorporated to the surface of the amphiphilic polymers via a coupling reaction between the hydroxyl group of the PEG segment and the carboxyl group of folic acid. The polymers were characterized by (1)H NMR, (13)C NMR, and combined size-exclusion chromatography and multiangle laser light scattering analysis. The nanoparticles of the amphiphilic polymers prepared by dialysis method were characterized by transmission electron microscopy and particle size analysis. Two antineoplastic drugs, 5-fluorouracil and paclitaxel, were encapsulated into the nanoparticles. The drug release property and the targeting of the drug-loaded nanoparticles to different cells were evaluated in vitro. The results showed the drug-loaded nanoparticles exhibited enhanced cell inhibition because folate targeting increased the cytotoxicity of drug-loaded nanoparticles against folate receptor expressing tumor cells.

Polyethyleneimine modified biocompatible poly(N-isopropylacrylamide)-based nanogels for drug delivery

A series of biocompatible and stimuli-sensitive poly(N-isopropylacrylamide-co-propyl acrylic acid) (P(NIPAAm-co-PAAc)) nanogels were synthesized by emulsion polymerization. In addition, polyethyleneimine (PEI) was further grafted to modify the PNIPAAm-based nanogels. The P(NIPAAm-co-PAAc)-g-PEI nanogels exhibited good thermosensitivity as well as pH sensitivity. Transmission electron microscopy (TEM) showed that the P(NIPAAm-co-PAAc)-g-PEI and P(NIPAAm-co-PAAc) nanogels displayed well dispersed spherical morphology. The mean sizes of the nanogels measured by dynamic light scattering (DLS) were from 100 nm to 500 nm at different temperatures. The cytotoxicity study indicated P(NIPAAm-co-PAAc) nanogels exhibited a better biocompatibility than both PNIPAAm nanogel and P(NIPAAm-co-PAAc)-g-PEI nanogel although all the three kinds of nanogels did not exhibit apparent cytotoxicity. The drug-loaded nanogels, especially the PEI-grafted nanogels, showed temperature-trigged controlled release behaviors, indicating the potential applications as an intelligent drug delivery system.

Preparation of bioactive nanotitania ceramics with biomechanical compatibility

In this article, bioactive nanotitania ceramics with biomechanical compatibility was prepared by using an additive of hydroxyapatite or MgO as particle growth inhibitor. After sintering at 1000 degrees C, the particle size of nanotitania ceramics prepared by using HA as additive (HT) was much smaller than that prepared by using MgO as additive (MT). In simulated body fluid (SBF), HT could induce apatite formation in 4 days, while no apatite could be found on MT even after it was soaked in SBF for 14 days. After Ros17/28 osteoblasts were cultured on the materials for 1, 4, and 6 days, MTT results showed that the osteoblasts on the HT differentiated faster than that on the MT. Mechanical tests results showed that the bending and compressive strength of HT were 160 and 200 MPa, while those of MT were 70 and 88 MPa, respectively. These results demonstrated that it is suitable to prepare bioactive nanotitania ceramics, with biomechanical compatibility, by using HA as particle growth inhibitor.

In vitro degradation and controlled release behavior of ,-PLGA50 and PCL-b-,-PLGA50 copolymer microspheres

Blank and bovine serum albumin (BSA)-loaded microspheres based on poly(lactic-acid-alt-glycolic acid) (D,L-PLGA50) and poly(epsilon-caprolactone)-b-poly(lactic-acid-alt-glycolic acid) (PCL-b-D,L-PLGA50) were successfully fabricated using water-in-oil-in-water (w/o/w) double-emulsion extraction/evaporation technique. In vitro degradation of the blank microspheres was characterized by techniques including nuclear magnetic resonance (1H NMR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The PCL-b-D,L-PLGA50 copolymer (Mn: number-average molecular weight, Mw: weight-average molecular weight, Mn=44800, Mw/Mn=MWD=1.24, epsilon-caprolactone (CL) %=20.4% in molar ratio) had similar rate of molecular weight reduction compared with the D,L-PLGA50 copolymer before 5 weeks of in vitro degradation. The BSA % loading efficiency of microspheres was mainly controlled by both block copolymer composition and macromolecular architecture, while the sequence structure and the molecular weight of copolymer had no apparent effect on it. Significantly, The PCL-b-D,L-PLGA50 copolymer microspheres showed good release profiles with a nearly constant release during 20-110 days.

Preparation and Evaluation of Proliposomes Containing Clotrimazole

Clotrimazole (CT)-containing proliposomes were prepared by penetrating an ethanol solution of CT and Egg phosphatidylcholine (PC) into microporous sorbitol particles, followed by vacuum evaporation of the solvent. As a result, CT proliposomes with free-flowing flowability were obtained. On contact with water, the proliposomes were rapidly converted into a liposomal dispersion, in which a certain amount of CT was entrapped by the liposomes. The result in scanning electronic micrograph confirmed the formation of liposomes structures from proliposomes, and the particles revealed round or ellipse. The ratio of drug to total lipid, ratio of PC to cholesterol and ratio of lipid to sorbitol affected the entrapment efficiency (EE%). The EE% of optimized formulation (CT 10 mg, 0.1 g total lipid, PC/CH ratio is 60 : 40 and 1 g sorbitol) in this investigation was 96.2+/-1.5%. The proliposomes system can provide sustaining release in simulated vaginal fluid at 37+/-1 degrees C for 24 h. In-vivo performance of blank proliposomes, a physical mixture of sorbitol and drug, clotrimazole proliposomes and commercial ointment formulation were evaluated using antifungal activity test. At 7 d post-dose, the c.f.u. of C. albicans decreased in proliposomes-treated groups than ointment and the physical mixture (t-Student, p<0.05). The results indicated that CT-containing vaginal proliposomes prolonged drug release and may increase amount of drug retention into the mucosa to result in more antifungal efficacy. In addition, CT-proliposomes did not affect the morphology of vaginal tissues. Therefore, the dosage form might be further developed for safe, convenient, and effective treatment of vaginal candidasis with reduced dosing interval.

Human fatty acid synthase: role of interdomain in the formation of catalytically active synthase dimer

The human and animal fatty acid synthases are dimers of two identical multifunctional proteins (M(r) 272,000) arranged in an antiparallel configuration. This arrangement generates two active centers for fatty acid synthesis separated by interdomain (ID) regions and predicts that two appropriate halves of the monomer should be able to reconstitute an active fatty acid synthesizing center. This prediction was confirmed by the reconstitution of the synthase active center by using two heterologously expressed halves of the monomer protein. Each of these recombinant halves of synthase monomer contains half of the ID regions. We show here that the fatty acid synthase activity could not be reconstituted when the ID sequences present in the two recombinant halves are deleted, suggesting that these ID sequences are essential for fatty acid synthase dimer formation. Further, we confirm that the ID sequences are the only regions of fatty acid synthase monomers that showed significant dimer formation, by using the yeast two-hybrid system. These results are consistent with the proposal that the ID region, which has no known catalytic activity, associates readily and holds together the two dynamic active centers of the fatty acid synthase dimer, therefore playing an important role in the architecture of catalytically active fatty acid synthase.

[Study on preparation and pharmacodynamics of insulin-loaded polyester microparticles]

AIM

To investigate the possibility of using poly (epsilon-caprolactone-block-D, L-lactide) (PLCA) as a kind of materials to prepare the microparticles drug carrier.

METHODS

PCLA-MP (microparticle, MP) was prepared by double-emulsification solvent evaporation method. Its morphology was examined by scanning electron microscope. Its size diameter was examined by particle analyser. Insulin (INS), as a model drug, was then encapsulated into PCLA-MP (INS-PCLA-MP). HPLC method was established for determining INS in INS-PCLA-MP. An "antibody-capture" procedure was devised for investigating encapsulation mechanism. The in vitro release behaviour of INS-PCLA-MP was determined in phosphatic buffer solution (pH 7.4). The diabetic rat model was established and blood glucose levels were measured using glucose oxidase (GOD-PAP) method to evaluate the hypoglycaemic effects after subcutaneous administration of INS-PCLA-MP. The pharmacological bioavailability (PBA) of INS-PCLA-MP was calculated from the area above the curve (AAC) in contrast with INS-solution.

RESULTS

The mean diameter of INS-PCLA-MP was 1.9 microns, while the encapsulation ratio of INS reached to 76.46%. Only 18.25% encapsulated INS was on the surface of the microparticles, it could be measured by "antibody-capture" experiment. The in vitro release curve of INS-PCLA-MP consists of initial rapid release stage followed by slower exponential stage. In pharmacodynamic studies, after subcutaneous administration of INS-PCLA-MP 12 u.kg-1, the hypoglycaemic effect was significant. The PBA of INS-PCLA-MP was 123.08%.

CONCLUSION

PCLA might become a new drug carrier material in the future.

Identification of modified tryptophan residues in apolipoprotein B-100 derived from copper ion-oxidized low-density lipoprotein

Oxidative modifications of low-density lipoproteins (LDL) may contribute to the pathogenesis of atherosclerosis. Although the oxidation products of the lipid components of LDL have been studied extensively, less is known about the oxidation products of the apoprotein, apolipoprotein B-100. To identify the specific oxidative modifications, we oxidized LDL in the presence of Cu(2+), treated with DNPH, precipitated and delipidated the protein, digested the protein with trypsin, and analyzed the peptides by high-performance liquid chromatography. We isolated nine peptides that exhibited measurable absorbance at 365 nm, which is characteristic of hydrazones derived from DNPH and is not observed in peptides derived from unoxidized LDL. Unexpectedly, we obtained the same peptides with absorbance at 365 nm in Cu(2+)-oxidized LDL not treated with DNPH. N-terminal sequence analyses and mass spectrometry indicated that the peptides isolated from the Cu(2+)-oxidized LDL all contained kynurenine residues in place of Trp residues found in the native apoprotein. The product profile we observed in Cu(2+)-oxidized LDL was remarkably different from the profiles observed in LDL oxidized by HOCl or myeloperoxidase in vitro, and the preferential oxidation of Trp to kynurenine in Cu(2+)-catalyzed oxidation of LDL contrasts with the products observed following oxidation of LDL with HOCl or myeloperoxidase. Our studies to date support the working hypothesis that the specific products of protein oxidation are sufficiently distinct to be developed as biomarkers of proposed mechanisms of oxidation of LDL and biological molecules in other toxicities and diseases.

Cooperativity between free and N-(2-hydroxypropyl) methacrylamide copolymer bound adriamycin and meso-chlorin e6 monoethylene diamine induced photodynamic therapy in human epithelial ovarian carcinoma in vitro

The purpose of this study was to determine the interaction between free (unbound) and N-(2-hydroxypropyl) methacrylamide (HPMA) copolymer bound adriamycin and meso-chlorin e6 monoethylene diamine (Mce6) induced photodynamic therapy in combination in their cytotoxic activities against human ovarian epithelial carcinoma (OVCAR-3) in vitro. The effects of each agent (free drugs and HPMA copolymer bound) alone and in combination were measured simultaneously utilizing two measures of cell viability: a) mitochondrial respiration via the 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide reduction (MTT) assay; and b) thymidine incorporation via the tritiated thymidine incorporation (TI) assay. These were performed at 72 and 144 h after drug exposure. Forty-eight hours from time zero (24 h after drug addition), the cells treated with Mce6 (free and HPMA copolymer bound) and controls were exposed to 650 nm light (13 min at 15 mW/cm2, 11.7 J/cm2). The calculated ED50 values by the MTT 72 h assay for adriamycin (A) and Mce6/light (C) were 1.5 microg/ml and 209 ng/ml, respectively. Adriamycin demonstrated progressive cellular toxicity over time in both assays. Mce6/light demonstrated initial damage at 72 h by MTT and TI which recovered by 144 h. Adriamycin and Mce6/light acted cooperatively to increase the percentage of cells inhibited. In combination, 21.3+/-1.5% MTT reduction activity was observed by free adriamycin and Mce6/light compared to the expected 27+/-5% (p<0. 0001) based on additivity. Twice the ED50 of adriamycin (2A=3 microg/ml) or Mce6/light (2C=418 ng/ml) resulted in only 42+/-3.6% and 39.2+/-2.0% activity, respectively (both p<0.0001 vs. combination). When Mce6/light at 10x ED50 (10C) was combined with 1x ED50 of adriamycin (1A), or the reciprocal combination, additional cooperativity was demonstrated. Compared to free drugs, both HPMA copolymer bound adriamycin (P-A) and HPMA copolymer bound Mce6/light (P-C) required a 10-fold increase in drug concentration to show equivalency with free drugs (A or C). Dose response curves demonstrated a reduced slope compared to free drugs in the same dose ranges. When P-A was added (1-10x free adriamycin ED50) to an effective concentration of P-C (10P-C: equivalent to 10x free Mce6 ED50) an improved long-term inhibition of OVCAR-3 cell multiplication was noted in both the MTT and TI 144 h assays. P-C (1-10x free Mce6 ED50) added to an effective concentration of P-A (10P-A: equivalent to 10x free adriamycin ED50) did not appear to significantly improve the efficacy profile of P-A. A and C in vitro appear to act independently and are cooperative in their combined toxicity against the human ovarian epithelial carcinoma cell line OVCAR-3. HPMA copolymer-adriamycin and Mce6 conjugates (P-A and P-C, respectively) inhibited growth of OVCAR-3 in vitro. HPMA copolymer-adriamycin added to HPMA copolymer-Mce6 improved the efficacy of HPMA copolymer-Mce6.

Selective modification of apoB-100 in the oxidation of low density lipoproteins by myeloperoxidase in vitro

Oxidative modification of LDL may be important in the initiation and/or progression of atherosclerosis, but the precise mechanisms through which low density lipoprotein (LDL) is oxidized are unknown. Recently, evidence for the existence of HOCl-oxidized LDL in human atherosclerotic lesions has been reported, and myeloperoxidase (MPO), which is thought to act through production of HOCl, has been identified in human atherosclerotic lesions. In the present report we describe the formation of 2,4-dinitrophenylhydrazine (DNPH)-reactive modifications in the apolipoprotein (apo) by exposure of LDL to myeloperoxidase in vitro. In contrast with the complex mixture of peptides from oxidation of LDL with reagent HOCl, oxidation with MPO in vitro produced a major tryptic peptide showing absorbance at 365 nm. This peptide was isolated and characterized as VELEVPQL(*C)SFILK..., corresponding to amino acid residues 53-66...on apoB-100. Mass spectrometric analyses of two tryptic peptides from oxidation of LDL by HOCl indicated formation of the corresponding methionine sulfoxide (M=O), cysteinyl azo (*C), RS -N= N-DNP, derivatives of EEL(*C)T(M=O)FIR and LNDLNS VLV(M=O)PTFHVPFTDLQVPS(*C)K, which suggest oxidation to the corresponding sulfinic acids (RSO2H) by HOCl. The present results demonstrate that DNPH-reactive modifications other than aldehydes and ketones can be formed in the oxidation of proteins and illustrate how characterization of specific products of protein oxidation can be useful in assessing the relative contributions of different and unexpected mechanisms to the oxidation of LDL and other target substrates. The data also suggest a direct interaction of the LDL particle with the active site on myeloperoxidase and indicate that effects of the protein microenvironment can greatly influence product formation and stability.

Oxidative modifications of apoB-100 by exposure of low density lipoproteins to HOCL in vitro

Although the products of oxidation of the lipid components of LDL have been studied extensively, much less is known about the specific products of oxidative modification of the apoprotein. We reacted native LDL and LDL that had been treated with HOCl with 2,4-dinitrophenylhydrazine (DNPH), delipidated and trypsinized the protein, and analyzed the products by HPLC. Although tryptic digests of native LDL and LDL oxidized by limited quantities of HOCl showed similar patterns by HPLC with detection at 220 nm, oxidized LDL showed several discrete peaks at 365 nm, which is characteristic of hydrazones formed with aldehydes and ketones, commonly termed protein carbonyls. Native LDl showed no peaks in the chromatograms at 365 nm. Peptides absorbing at 365 nm were isolated by HPLC and characterized. In most cases, the probable sites of modification on the peptides could be implied by failure of an anticipated amino acid to appear in the expected sequence. Of the 14 peptides isolated and characterized to date, eight peptides contained Cys residues. In other peptides, Lys, Trp, and Met were identified as amino acid residues apparently modified by HOCl treatment of LDL. Thirteen of the peptides identified are from trypsin-releasable peptides located on the surface of unoxidized native LDL. Our studies suggest a selective process of modification of apoB-100 by HOCl and the approaches used in the present studies should be useful for the characterization of the mechanisms of oxidation of this and other proteins.

Oxidation of bovine beta-casein by hypochlorite

We recently observed two 2,4-dinitrophenylhydrazine (DNPH)-reactive proteins of 40 and 120 kDa in the bronchoalveolar lavage fluids of rats exposed to >95% O(2) for 48 h. The N-terminal sequences of these proteins were both identical over 16 amino acids with rat beta-casein, which, in addition to its more common association with milk, is produced by cytotoxic T-lymphocytes, and has been found to have proinflammatory properties. Because of the inflammatory response that accompanies hyperoxic lung injury, we investigated the oxidation of bovine beta-casein by HOCl. Following exposure to HOCl at 4 degrees C for 15 min, derivatization with DNPH, washing, and digestion with trypsin, the resultant peptides were separated by reverse-phase HPLC. One peptide isolated from a peak absorbing at 365 nm was identified as AVP(Y*)PQR, corresponding to amino acids 177-183 of bovine beta-casein. Analysis of the peptide by both electrospray and matrix assisted laser desorption ionization (MALDI) mass spectrometry identified a molecular ion MH+ of 1008.5 Da, which represents an increase of 178 Da from the calculated monoisotopic MH+ of the unmodified peptide of 830.45 Da. Daughter ion spectra of the doubly charged parent ion of the peptide further support the oxidation of the tyrosine to the quinone methide, with subsequent conversion to the corresponding hydrazone with DNPH. A second pair of products were identified as arising from oxidation of Y(193) within the tryptic peptide constituted by amino acids 184-202, and the corresponding chymotryptic cleavage side product, 191-202. Exposure of beta-casein to increasing amounts of HOCl revealed that M and Y residues were the most susceptible, although bovine beta-casein contains no C, and a single W, which would not be detected by our methods. The approach described in the present report can be used to evaluate the contributions of distinct mechanisms of oxidation in other experimental or pathological models.

Effects of gemfibrozil on very-low-density lipoprotein composition and low-density lipoprotein size in patients with hypertriglyceridemia or combined hyperlipidemia

To examine the effects of gemfibrozil on very-low-density lipoprotein (VLDL) composition and low-density lipoprotein (LDL) size, five men with hypertriglyceridemia (HTG) alone and five men with HTG and hypercholesterolemia (combined hyperlipidemia, CHLP) were randomized for 8 weeks to Lopid SR (slow-release gemfibrozil; two 600-mg tablets once per day) or placebo in a crossover study. Drug therapy versus placebo significantly decreased plasma triglyceride (68%), and VLDL (77%), and significantly increased high-density lipoprotein cholesterol (25%); total cholesterol, apolipoprotein B and lipoprotein[a] concentrations did not change significantly. With drug, mean total apoE in plasma was 53% lower in patients with HTG and 39% lower in patients with CHLP. Gemfibrozil significantly affected VLDL composition: protein increased 26%, molar ratio of apoE to apoB reduced 48%, apoC-II increased 19%, and apoC-III decreased 9%. LDL cholesteryl ester significantly increased with drug treatment. VLDL subfractions were separated and classified as heparin binding (VLDLR, apoE rich) or nonbinding (VLDLNR-1 and VLDLNR-2, both apoE poor). All VLDL subfractions were significantly lower with drug therapy, and the differences for total VLDL and for VLDL subfractions were greater in patients with HTG. With placebo, VLDLR accounted for 41.8% of VLDL in HTG and 49.0% of VLDL in CHLP, reduced to 27.6% and 38.6%, respectively, with gemfibrozil. Taken together, these results suggest that treatment with gemfibrozil reduces plasma concentrations of VLDL and alters the apoprotein composition of VLDL in a manner that may favor LDL- and VLDL-receptor-mediated clearance of the apoE-rich VLDL subfraction, thereby reducing TG-rich particle concentrations, and possibly reducing risk for coronary heart disease.

Isobolographic assessment of the interaction between adriamycin and photodynamic therapy with meso-chlorin e6 monoethylene diamine in human epithelial ovarian carcinoma (OVCAR-3) in vitro

OBJECTIVE

Considering the differing mechanisms of cytotoxicity produced by adriamycin and the photosensitizer meso-chlorin e6 monoethylene diamine (Mce6) with light, the interaction of these agents in combination on human ovarian epithelial carcinoma (OVCAR-3 in vitro) was evaluated by dose and effect addition isobole analysis.

METHODS

Mitochondrial respiration via the 3-(4,5-dimethyl thiazol-2 yl)-2,5-diphenyl tetrazolium bromide cleavage assay (MTT) and reproductive capacity via the tritiated thymidine incorporation assay (TI) were assessed 72 and 144 hours after exposure to adriamycin, Mce6, and light (650 nm), and to their combinations, in OVCAR-3 cells grown in vitro (20,000 cells per well).

RESULTS

In the majority of assays, reproductive capacity was more sensitive to the drug(s) than was mitochondrial respiration (2-10x). Dose-addition isobole analysis showed synergy for the combination of 50% median effective dose (ED50) adriamycin with 50% ED50 Mce6/light in all assays (all P < or = .027). Antagonism was noted with the combination 25% ED50 adriamycin with 75% ED50 Mce6/light. Additivity and synergy were the predominant interactions for 75% ED50 adriamycin with 25% ED50 Mce6/light by dose-addition isobole analyses. Effect-addition isoboles showed a predominance of synergy, particularly for the combination 50% ED50 adriamycin with 50% ED50 Mce6/light.

CONCLUSION

Synergy and additivity are the primary in vitro interactions for the combination of adriamycin and Mce6/light in the dosage range tested. Reproductive capacity is more sensitive to these agents than is mitochondrial respiration.

The influence of the extent of target organs on sensitivities of methods for screening rodent carcinogens

Two hundred and thirty-three rodent carcinogens from the Carcinogenic Potency Database (CPDB) were analyzed with CASE (Computer Automated Structure Evaluation), and a comparison of the extents of target organs with the sensitivities for long-term carcinogenic bioassays in rats and mice, Salmonella assay (Sty), electrophilic substructure alert analysis (ESAA) and CASE was made. The carcinogenicity of 233 chemicals was evaluated in both rat and mouse bioassays. The present study showed that the sensitivities of the five methods for screening carcinogens were related to the extents of target organs of carcinogens. Among the carcinogens that did not induce tumors (extent = 0) in rats, the sensitivities of Sty and ESAA were 46 and 53, respectively. Among the carcinogens which induced tumors at a single organ (extent = 1) in rats, the sensitivities were 57 and 64 respectively; and 71 and 80 at multiple organs (extent > 1) respectively. The sensitivities of CASE were 76, 82, and 89 respectively at these three different extents. Similar results were obtained with these carcinogens in mice. The results indicate that mutagenic or electrophilic carcinogens are more likely to induce tumors at multiple target organs; in contrast, most carcinogens which induced tumors at only a single target organ in one species are rarely mutagenic or electrophilic. The sensitivities of Sty and ESAA were lower than that of the CASE method in these carcinogens. CASE analyzed chemical structures of many carcinogens and non-carcinogens and then established a database of key fragments, and its parameters are not only based on mutagenicity or electrophilicity of chemicals, and this resulted in a more exact detection of the carcinogenicity of chemicals with the CASE method.

Micronucleus formation induced by three polycyclic aromatic hydrocarbons in rat bone marrow and spleen erythrocytes following intratracheal instillation

Benz[a]anthracene (BA), dibenz[a,h]anthracene (DBA) and dibenzo[a,i]pyrene (DBP) are polycyclic aromatic hydrocarbons (PAHs) found in incomplete combustion products of fossil fuels, coal tar, and other organic materials. Workers in related industries may be exposed to these chemicals by inhalation. The information related to the potential health hazards of these chemicals to the exposed workers, however, is very limited. In the present study, micronucleus (MN) formation in rat bone marrow and spleen polychromatic erythrocytes (PCEs) was determined following three intratracheal instillations within a 24-h period with either BA, DBA or DBP. Three doses with five rats per dose were used for each chemical. Bone marrow and spleen cells were harvested 24 h after the first dosing. Results showed that the order of toxicity for the three PAHs was DBP > DBA > BA. BA induced MN in a dose-related manner in both bone marrow and spleen PCEs at doses above 25 mg/kg. DBA caused significant increases in the frequencies of MN in both spleen and bone marrow PCEs at the dose of 8.5 mg/kg or higher. At 10 mg/kg, DBP significantly increased MN frequency in spleen PCEs, but the increase in bone marrow PCEs was not significantly different from the control. These results indicate that: (1) all three PAHs studied are absorbed through the respiratory tract and their genotoxic metabolites reach the bone marrow and/or spleen; (2) except for DBP which does not induce MN in the bone marrow, all three PAHs induced MN in both bone marrow and spleen PCEs; and (3) the sensitivity of the spleen to the three PAHs is comparable to or higher than that of the bone marrow.

Structure of human apolipoprotein D: locations of the intermolecular and intramolecular disulfide links

We have determined the primary structure of human apolipoprotein D (apoD) by aligning peptides derived from digestions by cyanogen bromide, trypsin, and chymotrypsin. Our results confirm the primary structure derived from cDNA [Drayna et al. (1986) J. Biol. Chem. 261, 16535-16539]. ApoD consists of 169 amino acid residues, including 5 cysteines. Tryptic peptide analysis indicated that Cys41 and Cys16 are joined by a disulfide bridge. Using a combination of manual Edman degradations and mass spectrometric analysis on a purified cluster of chymotryptic fragments, we identified an intramolecular disulfide bridge between Cys8 and Cys114 and an intermolecular bridge between Cys116 of apoD and Cys6 of apoA-II. In addition, sites of N-glycosylation were found at Asn45 and Asn78. Because apoD contains two intramolecular disulfide linkages and has a high content of proline to disrupt alpha-helical structures, formation of the amphipathic helical regions that characterize the other soluble apolipoproteins is unlikely. We conclude that apoD binds to lipoprotein surfaces through structures other than alpha-helices, such as disulfide links.

Immunoreactivity of apolipoprotein B-100 in oxidatively modified low density lipoprotein

Thirteen monoclonal antibodies (MAbs) against apolipoprotein B-100 (apo B) were used to analyze changes in immunoreactivity of human LDL resulting from oxidation mediated by cupric ions and oxygen. Decrease in immunoreactivity of oxidized LDL was demonstrated by competitive ELISA with MAbs 5F8, BL3, Mb43, 2G8, B3, B5, and BL7 for which the epitopes are located within residues 1-1297, 4235-4355, 4027-4081, 3728-4306, 2239-2331, 1854-1878, and in the vicinity of residue 2331, respectively. Immunoreactivity of the epitope B6 (2239-2331) increased during first 4 hours of oxidation and then diminished gradually. Epitope B1 (405-539) had slightly reduced immunoreactivity during first 8 h of LDL oxidation and then its minor increase was observed. MAb 12G10, specific to the epitope within apo B thrombin-digest fragment T4 (1-1297), displayed either weak or strong binding to LDL. LDL with weak binding pattern demonstrated significant increase in immunoreactivity upon oxidation. In contrast, LDL with strong binding pattern showed little to no change. Epitopes Mb47 (3441-3569) and 8G4 (1-1297) remained unchanged in oxidized LDL. Immunoreactivity of apo B-100 epitope recognized by MAb 4C11 (residues 2377-2658) was shown to be a function of oxidation time: it increased progressively up to 16 h and was stabilized for another 24 h of LDL oxidation. This epitope may be unmasked by LDL oxidation and may provide a useful immunochemical marker to monitor the extent of LDL oxidation.

Genotoxicity of vanadium pentoxide in Chinese hamster V79 cells

Workers in many mining and manufacturing industries are potentially exposed to vanadium. Inhalation of dust containing vanadium pentoxide (V2O5), a pentavalent compound of vanadium, has been reported to cause lung diseases. Information related to the genotoxicity and potential carcinogenicity of V2O5, however, is still limited. In this study, the effect of V2O5 on mitosis, sister-chromatid exchange (SCE), micronucleus formation (MN), and gene mutation in Chinese hamster V79 cells was determined. Cells were treated with varying concentrations of V2O5 for 24 h. The results showed that no significant increases in the frequencies of SCE or gene mutation occurred in V2O5-treated cultures. However, dose-related increases were noted for micronucleated cells in cultures exposed to this compound, and the number of binucleated cells in the presence of cytochalasin B was found to decrease with increasing V2O5 concentrations. Since the micronucleated cells induced by V2O5 contained kinetochore-positive micronuclei, their induction appears to be due to damage to the spindle apparatus. These results indicate that V2O5 is cytotoxic and aneuploidogenic to V79 cells.

Primary structure of apoB-100

Apolipoprotein B-100 (apoB-100) is the major protein in low-density lipoprotein (LDL) and contains the ligand for binding LDL to its cell surface receptor. Lipoprotein [a] (Lp[a]) is a lipoprotein that consists of LDL and apolipoprotein [a] (apo[a]). The primary structure of apoB-100 has been determined by a combination of recombinant DNA and protein sequencing methods. Using high-performance liquid chromatographic techniques, we have identified sulfhydryl and disulfide groups of apoB-100 from LDL. Sixteen of the 25 cysteine residues in apoB-100 exist in disulfide form. All 14 cysteine residues within the N terminal end of apoB-100 are linked in disulfide bridges. Using the fluorescent sulfhydryl probe, 5-iodoacetoamidofluoresceine, two free sulfhydryls of apoB-100 on LDL were identified at positions 3734 and 4190. Based on its differential susceptibility to trypsin, apoB-100 can be divided into five domains: domain 1 (residues 1-1000), largely trypsin-releasable (TR); domain 2 (residues 1001-1700), alternating TR and trypsin non-releasable (TN); domain 3 (residues 1701-3070), largely TN; domain 4 (residues 3071-4100), mainly TR and mixed; and domain 5 (residues 4101-4536), almost exclusively TN. Based on our data, we propose that the structure of apoB-100 in LDL is probably an elongated form that wraps around the LDL particle, and that Cys3734 of apoB-100 may be the cysteine residue linked to a cysteine of apo[a].

Primary structure of Beijing duck apolipoprotein A-1

The primary structure of Beijing duck apolipoprotein A-1 was determined by sequencing peptide fragments derived from tryptic and endoproteinase Asp-N digestion of the protein, and alignment with homologous chicken apo A-1. All of the peptide fragments were isolated by high-pressure liquid chromatography (HPLC) with a Vydac C18 column using a trifluoroacetic acid (TFA) buffer system. The N-terminus of the protein was determined to be aspartic acid by directly sequencing 52 residues of the intact protein. The C-terminus was alanine. The protein contains 240 amino acid residues. By analysis of the whole protein and its tryptic peptides, a six amino acid (Arg-Tyr-Phe-Trp-Gln-His) prosegment was determined. No cross-reactivity between duck and human apo A-1 with a goat antiserum against human apo A-1 was found. Sequence analysis of apo A-1 of other species indicates that amino acid substitutions in rat are more extensive than in other mammals. Isoleucine residues in apo A-1 are inversely correlated to the homology of human to other species, except dog.

Human very low density lipoprotein structure: interaction of the C apolipoproteins with apolipoprotein B-100

Very low density lipoproteins (VLDL) are a heterogenous population of particles differing in size and composition. Heparin-Sepharose chromatography yields three VLDL subfractions. Two subfractions, VLDLNR-1 and VLDLNR-2, which are not retained by heparin, contain little or no detectable apolipoprotein (apo)E. According to negative stain electron microscopy, VLDLNR-1 is slightly larger than VLDLNR-2. The third fraction, VLDLR, is composed of smaller particles that are retained by the heparin-Sepharose and contain apoE. The C apolipoproteins of the respective VLDL subfractions transfer to 1-palmitoyl-2-oleoyl phosphatidylcholine (POPC) single bilayer vesicles giving three subfractions designated VLDLNR-1-C, VLDLNR-2-C, and VLDLR-C. The protein, phospholipid, and cholesterol (free + esterified) contents decrease in the order VLDLR > VLDLNR-2 > VLDLNR-1. Triglyceride content decreases in the opposite order. POPC treatment of each VLDL subfraction increases the phospholipid and decreases the protein, triglyceride, and cholesteryl ester contents, while free cholesterol remains unchanged. According to immunological analysis of each subfraction with well-characterized monoclonal antibodies, the accessibility of some epitopes of apoB-100 on VLDL is changed by POPC treatment. Electron-microscopic analysis of POPC-treated VLDL subfraction reveals vacancies on the surfaces of each particle. VLDLNR-1, VLDLNR-2, and VLDLR are resistant to thrombin cleavage, whereas the lipoproteins lacking C apolipoproteins are not. Thrombin cleavage (8 h) of apoB-100 of VLDLNR-2-C and VLDLR-C gives two fragments, T1 and T2, that are converted to smaller fragments only after prolonged treatment. In contrast, apoB-100 of VLDLNR-1-C is converted into small fragments after 8 h thrombin treatment. These results suggest that removal of apoCs affects the accessibility and conformation of apoB-100 in the individual VLDL subfractions in the region near residue 3249, which is the primary thrombin cleavage site and the epitope of monoclonal antibody 4C11.

Induction of micronuclei in BALB/c-3T3 cells by selected chemicals and complex mixtures

The genotoxicity of benzo[a]pyrene, cyclophosphamide, 2-aminoanthracene, 2-nitrofluorene, nitrosated coal-dust extracts, and cigarette-smoke condensate were tested with the micronucleus assay using an established mammalian cell line. The results showed that all chemicals and complex mixtures studied induced micronuclei in BALB/c-3T3 cells. These results indicate that BALB/c-3T3 cells are capable of activating certain promutagens and procarcinogens. It seems, therefore, that in addition to cell transformation, the micronucleus assay in BALB/c-3T3 cells without an exogenous activation system may be useful for in vitro studies to detect genotoxic chemicals and complex mixtures.

Micronucleus induction and phagocytosis in mammalian cells treated with diesel emission particles

Micronucleus induction and phagocytosis in V79 and CHO cells treated with diesel emission particles (DEP) were studied. After separation of the sample into supernatant and sediment fractions, the genotoxic activity of DEP was shown to reside in the supernatant fraction for the DMSO-extracted sample, and in the sedimented fraction for the dipalmitoyl lecithin (DPL), a primary component of pulmonary surfactant, dispersed sample. More particles from DMSO sediment samples were phagocytized than DPL sediment by both types of cells. This had no effect, however, on micronucleus induction. CHO cells phagocytized fewer particles, but gave a higher number of micronuclei than V79 cells. CHO cells seem to be more sensitive to DEP. Evidently, micronucleus induction is not the result of phagocytosis per se, but is due to the different response of the indicator cells to the DEP sample tested. These results further indicate that most, if not all, genotoxic compounds associated with DEP can be extracted by DMSO and that genotoxic activity associated with DEP inhaled into the lung may also be expressed by dispersion of particles in pulmonary surfactant.