A comprehensive review on the metal-based green valorized nanocomposite for the remediation of emerging colored organic waste

Potent and Versatile Biogenically Synthesized Alumina/Nickel Oxide Nanocomposite Adsorbent for Defluoridation of Drinking Water

In the present work, an extract of Salvia officinalis leaves was used to synthesize an alumina/NiO nanocomposite by the coprecipitation method. First, the shape and surface content of the synthesized adsorbent were determined. Scanning electron microscopy images showed the production of nanospheres and nanorods with sizes between 35 and 50 nm. X-ray diffraction measurement revealed strong, high-intensity peaks, confirming the preparation of a highly crystalline alumina/nickel oxide nanocomposite. Then, the pure nanoalumina, nickel oxide, and functionalized alumina/nickel oxide nanocomposite for water defluoridation were investigated under various conditions, for example, stirring period, pH, and initial fluoride concentration. Defluoridation with greener alumina, nickel oxide, and alumina/nickel oxide nanocomposite lasted 120 min at adsorbent dosages of 0.8 g/L in a pH 7 solution. The adoption process for the three sorbents matches the Langmuir adsorption isotherm. The process dynamics were explored using pseudo-second-order and first-order kinetics. The water quality after treatment met drinking water requirements, proving the viability of using nanoparticles for drinking water defluoridation. This work confirmed effective water defluoridation in the crystalline phase using synthesized nanoalumina, nickel oxide, and their nanocomposite, which highlights their importance for future drinking water defluoridation.

Adsorption potential of ionic liquid-modified ZnO nanoparticles for highly efficient removal of azo dye: detailed isotherms and kinetics

In this study, bare and ionic liquid-modified ZnO nanoparticles have been fabricated using microwave irradiation method. The fabricated nanoparticles were characterized by different techniques, viz. XRD, FT-IR, FESEM, and UV-Visible spectroscopy, and were explored as adsorbent for effective sequestration of azo dye (Brilliant Blue R-250) from aqueous media. Various factors affecting the adsorption efficiency of synthesized nanoparticles (bare/ionic liquid-modified) such as concentration of dye, pH of reaction media, dose of nanoparticles, and reaction time were thoroughly investigated with varying experimental conditions; on a magnetic stirrer and in a sonicator. The results exhibited a high adsorption efficiency of ionic liquid-modified nanoparticles for removal of dye as compared to the bare one. Also, an enhanced adsorption was observed via sonication in comparison with magnetic stirring. Different isotherms such as Langmuir, Freundlich, and Tempkin were elaborated. Evaluation of adsorption kinetics showed a linear pseudo-second-order equation for adsorption process. The exothermic and spontaneous nature of adsorption was further confirmed by thermodynamic investigations. As per the results obtained, it is suggested that the fabricated ionic liquid-modified ZnO nanoparticles could successfully remediate the toxic anionic dye from aqueous media. Hence, this system can be utilized for large-scale industrial applications.

Green route to fabrication of Semal-ZnO nanoparticles for efficient solar-driven catalysis of noxious dyes in diverse aquatic environments

This work successfully demonstrates a sustainable and environmentally friendly approach for synthesizing Semal-ZnO nanoparticles (NPs) using the aqueous leaf extract of Bombax ceiba L. These NPs exhibit an absorption peak at approximately 390 nm in the UV-visible spectrum and an energy gap (Eg) of 3.11 eV. Detailed analyses of the morphology and particle size using various spectroscopic and microscopic techniques, XRD, FE-SEM with EDS, and HR-TEM reveal crystallographic peaks attributable to the hexagonal phase, with an average crystal size of 17 nm. The Semal-ZnO NPs also exhibit a notable photocatalytic efficiency for degrading methylene blue (MB) and methyl orange (MO) under sunlight in different water samples collected from diverse natural sources, indicating that they are promising photocatalysts for environmental remediation. The photocatalytic efficiency of the biofabricated Semal-ZnO NPs is impressive, exhibiting a photodegradation rate of up to 99% for MB and 79% for MO in different water samples under exposure to sunlight. The novel phytofabricated Semal-ZnO NPs are thus a beacon of hope for the environment, with their desirable photocatalytic efficiency, pseudo-first-order kinetics, and ability to break down noxious dye pollutants in various aquatic environments.

The effect of the number of SO3- groups on the adsorption of anionic dyes by the synthesized hydroxyapatite/Mg-Al LDH nanocomposite

In this study, a new nanocomposite of hydroxyapatite (HA)/Mg-Al layered double hydroxide (LDH) was successfully formed via a facile co-precipitation method and applied to adsorb three anionic dyes of alizarin red S (ARS), Congo red (CR), and reactive red 120 (RR120) differing in the number of SO3- groups from aqueous solution. Based on a combination of characterization analysis and adsorption experiments, HA/Mg-Al LDH nanocomposite showed better adsorption performance than HA and Mg-Al LDH. Using XRD and TEM analyses, the crystallinity and the presence of nanoparticles were confirmed. According to the SEM investigation, the Mg-Al LDH layers in the nanocomposite structure were delaminated, while HA nanorods were formed at the surface of Mg-Al LDH nanoparticles. The higher BET surface area of the novel HA/Mg-Al LDH nanocomposite compared to HA and Mg-Al LDH provided its superior adsorption performance. Considering an effective amount of adsorbent dosage, pH 5 was selected as the optimum pH for each of the three dye solutions. According to the results from the study of contact time and initial concentration, the pseudo-second-order kinetic (R2 = 0.9987, 0.9951, and 0.9922) and Langmuir isotherm (R2 = 0.9873, 0.9956, and 0.9727) best fitted the data for ARS, CR, and RR120, respectively. Anionic dyes with different numbers of SO3- groups demonstrated distinct adsorption mechanisms for HA and Mg-Al LDH nanoparticles, indicating that the adsorption capacity is influenced by the number of SO3- groups, with HA/Mg-Al LDH nanocomposite offering superior performance toward dyes with higher numbers of SO3- groups. Furthermore, ΔH° less than 40 kJ/mol, positive ΔS°, and negative ΔG° accompanied by the mechanism clarifying show physical spontaneous adsorption without an external source of energy and increase the randomness of the process during the adsorption, respectively. Finally, the regeneration study demonstrated that the nanocomposite could be utilized for multiple adsorption-desorption cycles, proposing the HA/Mg-Al LDH as an economically and environmentally friendly adsorbent in the adsorption of anionic dyes in water treatment processes.

Sustainable degradation of pollutants, generation of electricity and hydrogen evolution via photocatalytic fuel cells: An Inclusive Review

Environmental pollution and energy crisis have recently become one of the major global concerns. Insincere discharge of massive amount of organic and inorganic wastes into the aqueous bodies causes serious impact on our environment. However, these organic substances are significant sources of carbon and energy that could be sustainably utilized rather than being discarded. Photocatalytic fuel cell (PFC) is a smart and novel energy conversion device that has the ability to achieve dual benefits: degrading the organic contaminants and simultaneously generating electricity, thereby helping in environmental remediation. This article presents a detailed study of the recent advancements in the development of PFC systems and focuses on the fundamental working principles of PFCs. The degradation of various common organic and inorganic contaminants including dyes and antibiotics with simultaneous power generation and hydrogen evolution has been outlined. The impact of various operational factors on the PFC activity has also been briefly discussed. Moreover, it provides an overview of the design guidelines of the different PFC systems that has been developed recently. It also includes a mention of the materials employed for the construction of the photo electrodes and highlights the major limitations and relevant research scopes that are anticipated to be of interest in the days to come. The review is intended to serve as a handy resource for researchers and budding scientists opting to work in this area of PFC devices.

Outstanding adsorption capacity of iron oxide synthesized with extract of açaí berry residue: kinetic, isotherm, and thermodynamic study for dye removal

Contamination of water by toxic dyes is a serious environmental problem. Adsorbents prepared by an environmentally safe route have stood out for application in pollutant removal. Herein, iron oxide-based nanomaterial composed of Fe(III)-OOH and Fe(II/III) bound to proanthocyanidins, with particles in the order of 20 nm, was prepared by green synthesis assisted by extract of açaí (Euterpe oleracea Mart.) berry seeds from an agro-industrial residue. The nanomaterial was applied in the adsorption of cationic dyes. Screening tests were carried out for methylene blue (MB), resulting in an outstanding maximum adsorption capacity of 531.8 mg g-1 at 343 K, pH 10, 180 min. The kinetics followed a pseudo-second-order model and the isotherm of Fritz-Schülnder provided the best fit. Thermodynamic data show an endothermic process with entropy increase, typical of chemisorption. The proposed mechanism is based on the multilayer formation over a heterogeneous adsorbent surface, with chemical and electrostatic interactions of MB with the iron oxide nanoparticles and with the proanthocyanidins. The high adsorption efficiency was attributed to the network formed by the polymeric proanthocyanidins that entangled and protected the iron oxide nanoparticles, which allowed the reuse of the nanomaterial for seven cycles without loss of adsorption efficiency.

Adsorption and catalytic degradation of bisphenol A and p-chlorophenol by magnetic carbon nanotubes

Phenolic compounds are common industrial pollutants that seriously endangers water ecology and human health. Therefore, the development of efficient and recyclable adsorbents is of importance for wastewater treatment. In this research, HCNTs/Fe3O4 composites were constructed using co-precipitation way by loading magnetic Fe3O4 particles onto hydroxylated multi-walled carbon nanotubes (MWCNTs), showing excellent adsorption capacity for Bisphenol A (BPA) and p-chlorophenol (p-CP), and excellent catalytic ability of activating potassium persulphate (KPS) for degradation of BPA and p-CP. The adsorption capacity and catalytic degradation potential were evaluated for the removal of BPA and p-CP from solutions. The results showed that the adsorption took only 1 h to reach equilibrium and HCNTs/Fe3O4 had maximum adsorption capacities of 113 mg g-1 for BPA and 41.6 mg g-1 for p-CP at 303 K, respectively. The adsorption of BPA fitted well using the Langmuir, Temkin and Freundlich models while the adsorption of p-CP fitted well using the Freundlich and Temkin models. BPA adsorption on HCNTs/Fe3O4 was dominated by π-π stacking and hydrogen bonding forces. The adsorption included both the mono-molecular layer adsorption on the adsorbent surface and the multi-molecular layer adsorption on the non-uniform surface. The adsorption of p-CP on HCNTs/Fe3O4 was a multi-molecular layer adsorption on a dissimilar surface. The adsorption was controlled by forces such as π-π stacking, hydrogen bonding, partition effect and molecular sieve effect. Moreover, KPS was added to the adsorption system to initiate a heterogeneous Fenton-like catalytic degradation. Over a wide pH range (4-10), 90% of the aqueous BPA solution and 88% of the p-CP solution were degraded in 3 and 2 h, respectively. After three adsorption-regeneration or degradation cycles, the removal of BPA and p-CP remained up to 88% and 66%, indicating that HCNTs/Fe3O4 composite is cost-effective, stable and highly efficient to remove BPA and p-CP from solution.