Promotion of the oxygen evolution performance of Ni-Fe layered hydroxides via the introduction of a proton-transfer mediator anion

Synthesis of self-supported NiCoFe(OH)x via fenton-like effect corrosion for highly efficient water oxidation

Efficientandinexpensiveoxygenevolutionreaction(OER)catalysts are essential for the electrochemical splitting of water into hydrogen fuel. Herein, we have successfully synthesized NiCoFe(OH)x nanosheets on Ni-Fe foam (NFF) by exploiting the Fenton-like effect of Co2+ and S2O82- to corrode the NFF foam. The as-prepared NiCoFe(OH)x/NFF exhibits the porous structure with the interconnected nanosheets that are firmly bonded to the conductive substrate of NFF, thereby enhancing ions and charge transfer kinetics. The unique structure and composition of NiCoFe(OH)x/NFF result in the low overpotentials of 200 and 262 mV at current densities of 10 and 100 mA cm-2, respectively, as well as a low Tafel slope of 53.25 mV dec-1. In addition, NiCoFe(OH)x/NFF displays low overpotentials of 267 and 294 mV at a high current density of 100 mA cm-2 in simulated and real seawater, respectively. Furthermore, the assembled NiCoFe(OH)x//Pt/C water electrolysis cell has achieved a current density of 10 mA cm-2 at a low voltage of 1.49 V, and displayed the good stability with slight attenuation for 110 h. The high OER performance of NiCoFe(OH)x is attributed to the co-catalytic effect of the three metal ions and the interconnected porous nanosheet structure.

Promoting Water Oxidation by Proton Acceptable Groups Surrounding Catalyst on Electrode Surface

Large-scale hydrogen production through water splitting represents an optimal approach for storing sustainable but intermittent energy sources. However, water oxidation, a complex and sluggish reaction, poses a significant bottleneck for water splitting efficiency. The impact of outer chemical environments on the reaction kinetics of water oxidation catalytic centers remains unexplored. Herein, chemical environment impacts were integrated by featuring methylpyridinium cation group (Py+) around the classic Ru(bpy)(tpy) (bpy=2,2'-bipyridine, tpy=2,2' : 6',2''-terpyridine) water oxidation catalyst on the electrode surface via electrochemical co-polymerization. The presence of Py+ groups could significantly enhance the turnover frequencies of Ru(bpy)(tpy), surpassing the performance of typical proton acceptors such as pyridine and benzoic acid anchored around the catalyst. Mechanistic investigations reveal that the flexible internal proton acceptor anions induced by Py+ around Ru(bpy)(tpy) are more effective than conventionally anchored proton acceptors, which promoted the rate-determining proton transfer process and enhanced the rate of water nucleophilic attack during O-O bond formation. This study may provide a novel perspective on achieving efficient water oxidation systems by integrating cations into the outer chemical environments of catalytic centers.

Boosting the Oxygen Evolution Activity of FeNi Oxides/Hydroxides by Molecular and Atomic Engineering

FeNi oxides/hydroxides are the best performing catalysts for oxidizing water at basic pH. Consequently, their improvement is the cornerstone to develop more efficient artificial photosynthetic systems. During the last 5 years different reports have demonstrated an enhancement of their activity by engineering their structures via: (1) modulation of the number of oxygen, iron and nickel vacancies; (2) single atoms (SAs) doping with metals such as Au, Ir, Ru and Pt; and (3) modification of their surface using organic ligands. All these strategies have led to more active and stable electrocatalysts for oxygen evolution rection (OER). In this Concept, we critically analyze these strategies using the most relevant examples.

In-situ fabrication of Cr doped FeNi LDH on commercial stainless steel for oxygen evolution reaction

Commercial stainless steel has attracted increasing interest due to their rich content in transition metal elements and corrosion resistance properties. In this work, we design a facile and rapid route to in-situ fabricate the Cr doped FeNi layered double hydroxides nanosheets (LDHs) on modified stainless steel (Cr-FeNi LDH @ ESS) under ambient condition.The ultra small scaled 2D structure only around 20 nm diameter and metal ions with multivalent oxidation state were observed on the in situ fabricated LDHs, which provides high active area and active sites and thus promote excellent oxygen evolution reaction (OER). The Cr-FeNi LDH @ESS electrocatalysts exhibit an over potential of 280 mV at 10 mA cm-2 and achieves a Tafel slope of 44 mV dec-1 for OER in the 1.0 M KOH aqueous solution. We anticipate that the operating strategy of our system may promote the development of commercial non-precious productions as the efficient electrocatalysts for energy storage and conversion.

Interfacial Micro-Environment of Electrocatalysis and Its Applications for Organic Electro-Oxidation Reaction

Conventional designing principal of electrocatalyst is focused on the electronic structure tuning, on which effectively promotes the electrocatalysis. However, as a typical kind of electrode-electrolyte interface reaction, the electrocatalysis performance is also closely dependent on the electrocatalyst interfacial micro-environment (IME), including pH, reactant concentration, electric field, surface geometry structure, hydrophilicity/hydrophobicity, etc. Recently, organic electro-oxidation reaction (OEOR), which simultaneously reduces the anodic polarization potential and produces value-added chemicals, has emerged as a competitive alternative to oxygen evolution reaction, and the role IME played in OEOR is receiving great interest. Thus, this article provides a timely review on IME and its applications toward OEOR. In this review, the IME for conventional gas-involving reactions, as a contrast, is first presented, and then the recent progresses of IME toward diverse typical OEOR are summarized; especially, some representative works are thoroughly discussed. Additionally, cutting-edge analytical methods and characterization techniques are introduced to comprehensively understand the role IME played in OEOR. In the last section, perspectives and challenges of IME regulation for OEOR are shared.

Eco-Friendly Fluorine Functionalized Superhydrophobic/Superoleophilic Zeolitic Imidazolate Frameworks-Based Composite for Continuous Oil-Water Separation

Superhydrophobic metal-organic framework (MOF)-based sponges have received increasing attention in terms of treating oil-water mixtures. However, highly fluorinated substances, commonly used as modifiers to improve the hydrophobicity of MOFs, have aroused much environmental concern. Developing a green hydrophobic modification is crucial in order to prepare superhydrophobic MOF-sponge composites. Herein, we report the preparation of a porous composite sponge via a polydopamine (PDA)-assisted growth of zeolitic imidazolate frameworks (ZIF-90) and eco-friendly hydrophobic short-chain fluorinated substances (trifluoroethylamine) on a melamine formaldehyde (MF) sponge. The composite sponge (F-ZIF-90@PDA-MF) exhibited superhydrophobicity (water contact angle, 153°) and superoleophilicity (oil contact angle, 0°), which is likely due to the combination of the low surface energy brought on by the grafted CF₃ groups, as well as the rough surface structures that were derived from the in situ growth of ZIF-90 nanoparticles. F-ZIF-90@PDA-MF showed an excellent adsorption capacity of 39.4-130.4 g g^-1 for the different organic compounds. The adsorbed organic compounds were easily recovered by physical squeezing. Continuous and selective separation for the different oil-water mixtures was realized by employing the composite sponge as an absorbent or a filter. The separation efficiency and flux reached above 99.5% and went up to 7.1 ×10⁵ L m^-2 h^-1, respectively. The results illustrate that the superhydrophobic and superoleophilic F-ZIF-90@PDA-MF sponge has potential in the field of water-oil separation, especially for the purposes of large-scale oil recovery in a water environment.

Effect of Surface‐Adsorbed and Intercalated (Oxy)anions on the Oxygen Evolution Reaction

As the kinetically demanding oxygen evolution reaction (OER) is crucial for the decarbonization of our society, a wide range of (pre)catalysts with various non‐active‐site elements (e.g., Mo, S, Se, N, P, C, Si…) have been investigated. Thermodynamics dictate that these elements oxidize during industrial operation. The formed oxyanions are water soluble and thus predominantly leach in a reconstruction process. Nevertheless, recently, it was unveiled that these thermodynamically stable (oxy)anions can adsorb on the surface or intercalate in the interlayer space of the active catalyst. There, they tune the electronic properties of the active sites and can interact with the reaction intermediates, changing the OER kinetics and potentially breaking the persisting OER *OH/*OOH scaling relations. Thus, the addition of (oxy)anions to the electrolyte opens a new design dimension for OER catalysis and the herein discussed observations deepen the understanding of the role of anions in the OER.

Observation of oxygen evolution over a {Ni12}-cluster-based metal-organic framework

The development of efficient electrocatalysts based on non-noble metals for oxygen evolution reaction (OER) remains an important and challenging task. Multinuclear transition-metal clusters with high structural stability are promising OER catalysts but their catalytic role is poorly understood. Here we report the crystallographic observation of OER activity over robust {Ni12}-clusters immobilised in a porous metal-organic framework, NKU-100, by single-crystal X-ray diffraction as a function of external applied potential. We observed the aggregation of confined oxygen species around the {Ni12}-cluster as a function of applied potential during the electrocatalytic process. The refined occupancy of these oxygen species shows a strong correlation with the variation of current density. This study demonstrates that the enrichment of oxygen species in the secondary co-ordination sphere of multinuclear transition-metal clusters can promote the OER activity.