Structure-Function Relationships in Pectin Emulsification

Influence of ripening stage on the microwave-assisted pectin extraction from banana peels: A feasibility study targeting both the Homogalacturonan and Rhamnogalacturonan-I region

This work investigated a sustainable and efficient approach of pectin extraction for banana peel waste valorisation and studied the influence of banana ripening stages (RS at 2,5 and 7). Although pectin content in banana peel raw material decreased during ripening, pectin extraction was favoured. The highest alcohol-insoluble solids (AIS) yield (12.5%) was achieved at 70 °C, 15 mins from RS 7 peel. All extracts were homogalacturan-rich with some rhamnogalacturonan-I content (showing HGA/RG-I ratio > 2) with varied degree of methylation (DM). The highest HGA content (837.2 mg/g AIS) and HGA/RG-I ratio (9.9) were achieved at 110 °C, 0 mins from RS 7, suggesting its promising application as gelling agent. The highest RG-I content (111.1 mg/g AIS) were obtained at 110 °C, 5 mins from RS 7, which was comparable with the pectin with reported prebiotic ability isolated from the literature, suggesting its potential application in novel products.

Effect of hydrochloric acid and citric acid with ultrasound processing on characteristics of superfine-ground pectic polysaccharides from okra (Abelmoschus esculentus L.) peel

The structural properties and biological activities of okra pectic polysaccharides (OPs) were impacted by various extraction methods. Based on commonly grinding (40, 100 meshes) and superfine grinding okra powders, two extraction solvents (hydrochloric acid, HA; citric acid, CA) were used firstly. Next, the extraction yield, physical and chemical properties, molecular structure and functional properties of OPs were analyzed by non-ultrasonic treatment and ultrasound-assisted superfine grinding method. The outcomes demonstrated that the extraction yield of OPs rose as the particle size of the powder decreased. HA-OPs had higher molecular weight (Mw), apparent viscosity and emulsification ability than CA-OPs. CA-OPs had higher esterification degree (DE), solubility and total sugar content, and higher amounts of rhamnogalacturonan-I (RG-I) segments. Compared with OPs without ultrasound-assisted extraction, ultrasound-assisted superfine grinding extraction exhibited higher sugar content, antioxidant capacity, emulsification ability, lower Mw, DE and apparent viscosity. Finally, the correlation between structure and function of OPs was further quantified. The antioxidant capacity was positively correlated with RG-I content, and negatively correlated with DE and Mw. The emulsification ability was mainly positively correlated with the GlcA of OPs. This study provides a theoretical basis for the development of OPs foods with clear structure-function relationship, which would be instructive for the application of OPs in food and cosmetics.

Comparison of structures and emulsifying properties between water-extracted pectins from Fructus aurantii

The structural characteristics of two water-extracted pectic polysaccharides from Fructus aurantii were investigated, and the impacts of their structures on the emulsifying stability were evaluated. FWP-60 (extracted by cold water and followed 60 % ethanol precipitation) and FHWP-50 (extracted by hot water and followed 50 % ethanol precipitation) were both high methyl-esterified pectins, which were composed of homogalacturonan (HG) and highly branched rhamnogalacturonan I (RG-I) regions. The weight-average molecular weight, methyl-esterification degree (DM) and HG/RG-I ratio of FWP-60 were 1200 kDa, 66.39 % and 4.45, respectively, which were 781 kDa, 79.10 % and 1.95 for FHWP-50. The methylation and NMR analysis of FWP-60 and FHWP-50 demonstrated that the main backbone consisted of different molar ratios of →4)-α-GalpA-(1 → and →4)-α-GalpA-6-O-methyl-(1→, and the side chains contained arabinan and galactan. Moreover, the emulsifying properties of FWP-60 and FHWP-50 were discussed. Compared with FHWP-50, FWP-60 had better emulsion stability. Overall, pectin had a linear HG domain and a small number of RG-I domain with short side chains to facilitate the stabilization of emulsions in Fructus aurantii. A comprehensive knowledge of the structure characteristic and emulsifying property would enable us to provide more information and theoretical guidance for the structure and emulsion preparation of Fructus aurantii pectic polysaccharides.

The Effects of Pectin Structure on Emulsifying, Rheological, and In Vitro Digestion Properties of Emulsion

Pectin, a complex hydrocolloid, attracts extensive attention and application stemming from its good emulsification. However, the source of emulsification remains a conundrum. In this experiment, the structures of six kinds of commercial pectin, including LM 101 AS (101), LM 104 AS (104), 121 SLOW SET (121), YM 150 H (150), LM 13 CG (13CG), and β-PECTIN (β-P) were determined, and the effects of pectin structure on emulsion emulsification, rheology and in vitro digestibility were studied. The results showed that the β-P pectin contained a higher content of protein, ferulic acid, and acetyl and had a lower interfacial tension; this pectin-stabilized emulsion exhibited a smaller droplet size and superior centrifugal and storage stability. The results showed that β-P pectin had higher contents of protein, ferulic acid, and acetyl and lower interfacial tension than other pectins, and its stabilized emulsion exhibited smaller droplet size and superior centrifugation and storage stability. Furthermore, the emulsion formed by the pectin with high molecular weight and degree of methoxylation (DM) had a higher viscosity, which can inhibit the aggregation of emulsion droplets to some extent. However, the DM of pectin affected the charge and digestion behavior of pectin emulsion to a great extent. The smaller the DM, the more negative charge the emulsion carried, and the higher the release rate of free fatty acids. The results provided a basis for the rational selection and structural design of the pectin emulsifier.

Elaboration and characterization of nanoemulsion with orange essential oil and pectin

BACKGROUND

Nanoemulsions formulated with citric essential oils are currently of interest because of their physical and chemical properties and multiple applications in areas such as the food industry or agrochemicals. These are thermodynamically unstable and have almost Newtonian flow behaviour, but a suitable formulation allows systems to be obtained with good physical stability and rheological properties. The addition of pectin makes this possible. In this work, food nanoemulsions formulated with pectin, orange essential oil (5 wt%), and Tween 80 were obtained by microfluidization. First, the effect of Tween 80 concentration from 1 to 5 wt% on emulsions without pectin was evaluated. Then, pectin was added to the most stable nanoemulsion obtained and two variables were studied: the pectin solution concentration (from 2 to 6 wt%) and the pectin/emulsion ratio (1:1 or 2:1) at a fixed pectin concentration.

RESULTS

Rheological, laser diffraction, and multiple light scattering techniques were employed to determine the content of Tween 80 that results in the most stable nanoemulsion without pectin, which was 3 wt%. In addition, these techniques were used to determine the structure and physical stability of the nanoemulsions containing orange essential oil and pectin. The results obtained showed that the emulsions containing 2 wt% pectin were destabilized before 24 h. Furthermore, the emulsion with 6 wt% pectin and a 2:1 pectin/emulsion ratio showed the highest viscosity and the lowest mean diameters, and therefore the greatest stability.

CONCLUSION

This work extends the knowledge of formulation of nanoemulsions and using essential oils. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Enzymatic Hydrolysis Modifies Emulsifying Properties of Okra Pectin

Okra pectins (OKPs) with diverse structures obtained by different extraction protocols have been used to study the relationship between their molecular structure and emulsifying properties. A targeted modification of molecular structure offers a more rigorous method for investigating the emulsifying properties of pectins. In this study, three glycoside hydrolases, polygalacturonase (PG), galactanase (GL), and arabinanase (AR), and their combinations, were used to modify the backbone and side-chains of OKP, and the relationships between the pectin structure and emulsion characteristics were examined by multivariate analysis. Enzymatic treatment significantly changed the molecular structure of OKP, as indicated by monosaccharide composition, molecular weight, and structure analysis. GL- and AR- treatments reduced side-chains, while PG-treatment increased side-chain compositions in pectin structure. We compared the performance of hydrolyzed pectins in stabilizing emulsions containing 50% v/v oil-phase and 0.25% w/v pectin. While the emulsions were stabilized by PG (93.3% stability), the emulsion stability was reduced in GL (62.5%), PG+GL+AR (37.0%), and GL+AR (34.0%) after 15-day storage. Furthermore, microscopic observation of the droplets revealed that emulsion destabilization was caused by flocculation and coalescence. Principal component analysis confirmed that neutral sugar side-chains are key for long-term emulsion stabilization and that their structure explains the emulsifying properties of OKP. Our data provide structure-function information applicable to the tailored extraction of OKP with good emulsification performance, which can be used as a natural emulsifier.

Antioxidant and emulsifying properties of a galactose-rich heteropolysaccharide from Plinia cauliflora peels

In this study functional properties of a galactose-rich heteropolysaccharide (GH) were accessed. The bands of a galactose-rich polysaccharide were found in FTIR spectra, including those from the fingerprint region. GH was characterized as a dark-red material (L* 25.86 ± 0.75, a* 9.46 ± 1.01, b* 0.65 ± 0.14, Chroma 9.48 ± 1.02) with antioxidant activity of 21.5 ± 0.08, 12.1 ± 0.06 and 0.46 ± 0.04 mmol Trolox Eq mg^-1 GH in FRAP, DPPH and ABTS, respectively. GH presented 44.9% of esterification degree and 10.73 ± 0. 01 mg of GAE g^-1. The production parameters of GH emulsions (GH concentration, time and ultrasound power) were optimized using a 2³ Central Composite Rotatable Design (CCRD). Emulsion droplets presented particle size (d µm) varying from 0.823 ± 0.065 to 1.926 ± 0.151, polydispersity index (PDI) from 0.10 ± 0.05 to 0.40 ± 0.01 and zeta potential from -29.25 ± 3.98 to -33.75 ± 1.77. Finally, the high emulsifying activity (EA) (96.67%) and emulsion stability (ES) (97.44%) allow suggesting that GH is a promising polysaccharide for food applications.

Trends in "green" and novel methods of pectin modification - A review

Modification of hydrocolloids to alter their functional properties using chemical methods is well documented in the literature. There has been a recent trend of adopting eco-friendly and "green" methods for modification. Pectin, being a very important hydrocolloid finds its use in various food applications due to its gelling, emulsifying, and stabilizing properties. The adoption of various "green" methods can alter the properties of pectin and make it more suitable for incorporation in food products. The novel approaches such as microwave and pulsed electric field can also be utilized for solvent-free modification, making it desirable from the perspective of sustainability, as it reduces the consumption of organic chemicals. Pectic oligosaccharides (POSs) produced via novel approaches are being explored for their biological properties and incorporation in various functional foods. The review can help to set the perspective of potential scale-up and adoption by the food industry for modification of pectin.

Short-time acoustic and hydrodynamic cavitation improves dispersibility and functionality of pectin-rich biopolymers from citrus waste

Pectin is a valuable biopolymer used as a natural, clean label additive for thickening and gelling. However, industry faces issues with dispersibility and stability of pectin formulations. To address these issues, the effect of short processing time (30-180 s) with hydrodynamic (HC) and acoustic cavitation (AC) on the dispersibility and gelling functionality of mandarin pectin-rich polysaccharide (M-PRP) was investigated. Short-time processing with HC and AC did not affect polymer composition. HC, but not AC, decreased polydispersity index (PDI) from 0.78 to 0.68 compared to the control. Electron and atomic force microscopy showed that HC and AC decreased aggregation of fibrous and matrix polymers. Both treatments increased apparent viscosity significantly from 0.059 Pa s to 0.30 Pa s at 10 ^-s. The pectin dispersions showed good gelling capacity upon addition of calcium (final conc. 35 mM). HC and AC treatments for 150 s led to gels that were 7 and 4 times stronger (as measured by peak force) than the control with more homogeneous, less porous structures. In conclusion, short-time HC and AC can improve the dispersibility and functionality of citrus pectin without affecting composition, and are promising technologies to facilitate the use of pectin in industry applications.

Modified Rhamnogalacturonan-Rich Apple Pectin-Derived Structures: The Relation between Their Structural Characteristics and Emulsifying and Emulsion-Stabilizing Properties

In the context of the increasing interest in natural food ingredients, the emulsifying and emulsion-stabilizing properties of three rhamnogalacturonan-rich apple pectin-derived samples were assessed by evaluating a range of physicochemical properties. An apple pectin (AP74) was structurally modified by a β-eliminative reaction to obtain a RG-I-rich pectin sample (AP-RG). Subsequent acid hydrolysis of AP-RG led to the generation of pectin material with partially removed side chains (in particular arabinose depleted) (AP-RG-hydrolyzed), thus exhibiting differences in rhamnose, arabinose, and galactose in comparison to AP-RG. All samples exhibited surface activity to some extent, especially under acidic conditions (pH 2.5). Furthermore, the viscosity of the samples was assessed in relation to their emulsion-stabilizing properties. In a stability study, it was observed that the non-degraded AP74 sample at pH 2.5 exhibited the best performance among all the apple pectin-derived samples evaluated. This emulsion presented relatively small oil droplets upon emulsion production and was less prone to creaming than the emulsions stabilized by the (lower molecular weight) RG-I-rich materials. The AP-RG and AP-RG-hydrolyzed samples presented a slightly better emulsion stability at pH 6.0 than at pH 2.5. Yet, neither pectin sample was considered having good emulsifying and emulsion-stabilizing properties, indicated by the presence of coalesced and flocculated oil droplets.

The Effect of Different Extraction Conditions on the Physical Properties, Conformation and Branching of Pectins Extracted from Cucumis melo Inodorus

The extraction of pectin involves the physico-chemical hydrolysis and solubilisation of pectic polymers from plant tissues under the influence of several processing parameters. In this study, an experimental design approach was used to examine the effects of extraction pH, time and temperature on the pectins extracted from Cucumis melo Inodorus. Knowledge of physical properties (intrinsic viscosity and molar mass), dilute solution conformation (persistence length and mass per unit length), together with chemical composition, was then used to propose a new method, which can estimate the length and number of branches on the pectin RG-I region. The results show that physical properties, conformation and the length and number of branches are sensitive to extraction conditions. The fitting of regression equations relating length and number of branches on the pectin RG-I region to extraction conditions can, therefore, lead to tailor-made pectins with specific properties for specific applications.

Clustering of instrumental methods to characterize the texture and the rheology of slimy okra (Abelmoschus esculentus) suspensions

Okra (Abelmoschus esculentus) is one of the ingredients widely used in African gastronomy because of the unique slimy texture it gives to sauces. However, processing and formulation can affect the textural and rheological properties of these sauces, leading to unacceptable quality for the African consumer. The aim of this study was to select the instrumental measurements best enabling (a) characterization of the rheology and texture of slimy sauces prepared from okra and (b) monitoring its evolution during the preservation process. Thirty-seven slimy suspensions (sauces and purées) were measured with 16 rheological and textural parameters. A principal component analysis revealed that flow consistency index K and flow behavior index n were well correlated with visco-elastic, adhesive, and shear thinning properties, and that stringiness was well correlated with elongational, cohesive, and ductile properties. These two sets of measurement methods are sufficient to characterize their rheological and textural properties, and necessary to discriminate them according to their process and formulation.

Pectin recovery and characterization from lemon juice waste streams

BACKGROUND

Pectin characteristics from different parts of lemon fruit (Citrus limon L.) were studied as a basis for assessing their suitability for functional applications. Pectin was extracted from lemon albedo, lemon core parts and membranes, and lemon extract using an aqueous extraction protocol. The composition and structural properties of the isolated pectins were examined by means of complementary analytical methods to assess their molecular characteristics for potential industrial applications.

RESULTS

The isolation protocol yielded pectins that were predominantly composed of galacturonic acid, with differences in the degree of methylation and neutral sugars content, and with low protein content, indicating high-purity materials. The same extraction protocol resulted in differences in yield and purity between the three different parts of lemon fruit, and in structural variations in the pectin backbone, as evidenced by differences in sugar composition and molecular weight. Solutions of the isolated lemon pectins exhibited pseudoplastic behavior. Macromolecular characterization showed that the lemon extract pectin had the highest molecular weight and hydrodynamic volume, followed by lemon core and lemon albedo pectin.

CONCLUSION

The work demonstrates that pectins with distinct structural properties may be extracted from different parts of lemon wastes and used for different technological purposes. © 2019 Society of Chemical Industry.

Polysaccharides at fluid interfaces of food systems

Fabrication of next generation polysaccharides with interfacial properties is driven by the need to create high performance surfactants that operate at extreme environments, as for example in complex food formulations or in the gastrointestinal tract. The present review examines the behaviour of polysaccharides at fluid food interfaces focusing on their performance in the absence of any other intentionally added interfacially active components. Relevant theoretical principles of colloidal stabilisation using concepts that have been developed for synthetic polymers at interfaces are firstly introduced. The role of protein that in most cases is present in polysaccharide preparations either as contaminant or as integral part of the structure is also discussed. Critical assessment of the literature reveals that although protein may contribute to emulsion formation mostly as an anchor for polysaccharides to attach, it is not the determinant factor for the long-term emulsion stability, irrespectively of polysaccharide structure. Interfacial performance of key polysaccharides is also assessed revealing shared characteristics in their modes of adsorption. Conformation of polysaccharides, as affected by the composition of the aqueous solvent needs to be closely controlled, as it seems to be the underlying fundamental cause of stabilisation events and appears to be more important than the constituent polysaccharide sugar-monomers. Finally, polysaccharide adsorption is better understood by regarding them as copolymers, as this approach may assist to better control their properties with the aim to create the next generation biosurfactants.