Theoretical evaluation of a simple cooling pad for inducing hypothermia in the spinal cord following traumatic injury

Tissue Temperature Increases by a 10 kHz Spinal Cord Stimulation System: Phantom and Bioheat Model

OBJECTIVE

A recently introduced Spinal Cord Stimulation (SCS) system operates at 10 kHz, faster than conventional SCS systems, resulting in significantly more power delivered to tissues. Using a SCS heat phantom and bioheat multi-physics model, we characterized tissue temperature increases by this 10 kHz system. We also evaluated its Implanted Pulse Generator (IPG) output compliance and the role of impedance in temperature increases.

MATERIALS AND METHODS

The 10 kHz SCS system output was characterized under resistive loads (1-10 KΩ). Separately, fiber optic temperature probes quantified temperature increases (ΔTs) around the SCS lead in specially developed heat phantoms. The role of stimulation Level (1-7; ideal pulse peak-to-peak of 1-7mA) was considered, specifically in the context of stimulation current Root Mean Square (RMS). Data from the heat phantom were verified with the SCS heat-transfer models. A custom high-bandwidth stimulator provided 10 kHz pulses and sinusoidal stimulation for control experiments.

RESULTS

The 10 kHz SCS system delivers 10 kHz biphasic pulses (30-20-30 μs). Voltage compliance was 15.6V. Even below voltage compliance, IPG bandwidth attenuated pulse waveform, limiting applied RMS. Temperature increased supralinearly with stimulation Level in a manner predicted by applied RMS. ΔT increases with Level and impedance until stimulator compliance was reached. Therefore, IPG bandwidth and compliance dampen peak heating. Nonetheless, temperature increases predicted by bioheat multi-physic models (ΔT = 0.64°C and 1.42°C respectively at Level 4 and 7 at the cervical segment; ΔT = 0.68°C and 1.72°C respectively at Level 4 and 7 at the thoracic spinal cord)-within ranges previously reported to effect neurophysiology.

CONCLUSIONS

Heating of spinal tissues by this 10 kHz SCS system theoretically increases quickly with stimulation level and load impedance, while dampened by IPG pulse bandwidth and voltage compliance limitations. If validated in vivo as a mechanism of kHz SCS, bioheat models informed by IPG limitations allow prediction and optimization of temperature changes.

Bioheat transfer model of transcutaneous spinal cord stimulation-induced temperature changes

Transcutaneous spinal cord stimulation (tSCS) has been extensively studied due to its promising application in motor function restoration. Many previous studies have explored both the essential mechanism of action and the methods for determining optimal stimulation parameters. In contrast, the bioheat transfer analysis of tSCS therapy has not been investigated to the same extent, despite widely existing, and being of great significance in assuring a stable and thermally safe treatment. In this paper, we concentrated on the thermal effects of tSCS using a finite element-based method. By coupling the electric field and bioheat field, systematic finite element simulations were performed on a human spinal cord model to survey the influence of anatomical structures, blood perfusion, and stimulation parameters on temperature changes for the first time. The results show that tSCS-induced temperature rise mainly occurs in the skin and fat layers and varies due to individual differences. The current density distribution along with the interactions of multiple biothermal effects synthetically determines the thermal status of the whole spinal cord model. Smaller stimulation electrodes have a higher risk of thermal damage when compared with larger electrodes. Increasing the stimulation intensity will result in more joule heat accumulation, hence an increase in the temperature. Among all configurations in this study that simulated the clinical tSCS protocols, the temperature rise could reach up to 9.4 °C on the skin surface depending on the stimulation parameters and tissue blood perfusion.

Hypothermia Used in Medical Applications for Brain and Spinal Cord Injury Patients

Despite more than 80 years of animal experiments and clinical practice, efficacy of hypothermia in improving treatment outcomes in patients suffering from cell and tissue damage caused by ischemia is still ongoing. This review will first describe the history of utilizing cooling in medical treatment, followed by chemical and biochemical mechanisms of cooling that can lead to neuroprotection often observed in animal studies and some clinical studies. The next sections will be focused on current cooling approaches/devices, as well as cooling parameters recommended by researchers and clinicians. Animal and clinical studies of implementing hypothermia to spinal cord and brain tissue injury patients are presented next. This section will review the latest outcomes of hypothermia in treating patients suffering from traumatic brain injury (TBI), spinal cord injury (SCI), stroke, cardiopulmonary surgery, and cardiac arrest, followed by a summary of available evidence regarding both demonstrated neuroprotection and potential risks of hypothermia. Contributions from bioengineers to the field of hypothermia in medical treatment will be discussed in the last section of this review. Overall, an accumulating body of clinical evidence along with several decades of animal research and mathematical simulations has documented that the efficacy of hypothermia is dependent on achieving a reduced temperature in the target tissue before or soon after the injury-precipitating event. Mild hypothermia with temperature reduction of several degrees Celsius is as effective as modest or deep hypothermia in providing therapeutic benefit without introducing collateral/systemic complications. It is widely demonstrated that the rewarming rate must be controlled to be lower than 0.5 °C/h to avoid mismatch between local blood perfusion and metabolism. In the past several decades, many different cooling methods and devices have been designed, tested, and used in medical treatments with mixed results. Accurately designing treatment protocols to achieve specific cooling outcomes requires collaboration among engineers, researchers, and clinicians. Although this problem is quite challenging, it presents a major opportunity for bioengineers to create methods and devices that quickly and safely produce hypothermia in targeted tissue regions without interfering with routine medical treatment.

An experimental study and finite element modeling of head and neck cooling for brain hypothermia

Reducing brain temperature by head and neck cooling is likely to be the protective treatment for humans when subjects to sudden cardiac arrest. This study develops the experimental validation model and finite element modeling (FEM) to study the head and neck cooling separately, which can induce therapeutic hypothermia focused on the brain. Anatomically accurate geometries based on CT images of the skull and carotid artery are utilized to find the 3D geometry for FEM to analyze the temperature distributions and 3D-printing to build the physical model for experiment. The results show that FEM predicted and experimentally measured temperatures have good agreement, which can be used to predict the temporal and spatial temperature distributions of the tissue and blood during the head and neck cooling process. Effects of boundary condition, perfusion, blood flow rate, and size of cooling area are studied. For head cooling, the cooling penetration depth is greatly depending on the blood perfusion in the brain. In the normal blood flow condition, the neck internal carotid artery temperature is decreased only by about 0.13°C after 60min of hypothermia. In an ischemic (low blood flow rate) condition, such temperature can be decreased by about 1.0°C. In conclusion, decreasing the blood perfusion and metabolic reduction factor could be more beneficial to cool the core zone. The results also suggest that more SBC researches should be explored, such as the optimization of simulation and experimental models, and to perform the experiment on human subjects.

Modelling accidental hypothermia effects on a human body under different pathophysiological conditions

Accidental exposure to cold water environment is one of the most challenging situations in which hypothermia occurs. In the present work, we aim to characterise the energy balance of a human body subjected to such extreme environmental conditions. This study is carried out using a recently developed computational model and by setting boundary conditions needed to simulate the effect of cold surrounding environment. A major finding is the capacity of the body core regions to maintain their temperature high for a substantial amount of time, even under the most extreme environmental conditions. We also considered two disease states that highlight the spectrum of possible pathologies implicated in thermal regulation of the human body. These states are (i) cardiomyopathy, which affects the operating capacity of the heart, and (ii) malnutrition, which directly impairs the body’s ability to regulate heat exchange with the environment. We have found that cardiomyopathy has little influence on the thermal balance of the human body, whereas malnutrition has a profound negative effect on the thermal balance and leads to dramatic reduction in core temperature.

Local cooling for traumatic spinal cord injury: outcomes in 20 patients and review of the literature

OBJECT

In this prospective study, the authors offered protocol-selected patients a combination of parenteral steroids, decompression surgery, and localized cooling to preserve viable spinal cord tissue and enhance functional recovery.

METHODS

After acquiring informed consent, the authors offered this regimen with localized deep cord cooling (dural temperature 6°C) to 20 patients with a neurologically complete spinal cord injury to begin within 8 hours of injury. After decompression, the cord was locally cooled through the intact dura using a suspended extradural saddle at the site of injury for up to 4 hours, during which time spinal fusion was performed. Sensation and motor function were evaluated directly after the injury and again over a year later. The patients were evaluated using the 2011 amendment to the American Spinal Injury Association (ASIA) Impairment Scale.

RESULTS

Eighty percent of the 20 patients (12 with cervical and 4 thoracic injuries) with an initial neurologically complete cord injury had some recovery of sensory or motor function. All patients initially had ASIA Grade A impairment. Of 14 patients with quadriplegia, 5 remained ASIA Grade A, 5 improved to ASIA Grade B, 3 to ASIA Grade C, and 1 to ASIA Grade D. The remaining 6 patients had suffered a thoracic spinal cord injury, and of these 2 remained ASIA Grade A, 1 recovered to ASIA Grade B, 2 to ASIA Grade C, and 1 ASIA Grade D. All considered, of 20 patients, 35% remained ASIA Grade A, 30% improved to ASIA Grade B, and 25% to ASIA Grade C. Impairment in 2 (10%) of 20 patients improved to ASIA Grade D. The mean improvement in neurological level of injury in all patients was 1.05, the mean improvement in motor level was 1.7, and the mean improvement in sensory level was 2.8. Two patients recovered the ability to walk, 2 could extend their legs, 5 could sense bladder fullness, and 3 had partial ability to void voluntarily. Four males recovered subnormal ability to have voluntary erection sufficient for limited sexual activity.

CONCLUSIONS

The authors present here results of 20 patients with neurologically complete spinal cord injury treated with a combination of surgical decompression, glucocorticoid administration, and regional hypothermia. These patients experienced a better recovery than might have been expected had traditional forms of treatment been used. The benefit of steroid treatment for cord injury has been debated in the last decade, but the authors feel that research into the effects of cord cooling should be expanded. Given that the optimal neuroprotective temperature after acute trauma has not yet been defined, and may well be below that which is considered safely approachable through systemic cooling, methods that allow for the early attainment of such a temperature locally should be further explored. The results are encouraging enough to suggest the undertaking of controlled clinical trials of treatment using localized spinal cord cooling, where such treatment can be instituted within hours following injury.

Theoretical simulation of temperature elevations in a joint wear simulator during rotations

The objective of this study is to develop a theoretical model to simulate temperature fields in a joint simulator for various bearing conditions using finite element analyses. The frictional heat generation rate at the interface between a moving pin and a stationary base is modeled as a boundary heat source. Both the heat source and the pin are rotating on the base. We are able to conduct a theoretical study to show the feasibility of using the COMSOL software package to simulate heat transfer in a domain with moving components and a moving boundary source term. The finite element model for temperature changes agrees in general trends with experimental data. Heat conduction occurs primarily in the highly conductive base component, and high temperature elevation is confined to the vicinity of the interface in the pin. Thirty rotations of a polyethylene pin on a cobalt-chrome base for 60 s generate more than 2.26 °C in the temperature elevation from its initial temperature of 25 °C at the interface in a baseline model with a rotation frequency of 0.5 Hz. A higher heat generation rate is the direct result of a faster rotation frequency associated with intensity of exercise, and it results in doubling the temperature elevations when the frequency is increased by100%. Temperature elevations of more than 7.5 °C occur at the interface when the friction force is tripled from that in the baseline model. The theoretical modeling approach developed in this study can be used in the future to test different materials, different material compositions, and different heat generation rates at the interface under various body and environmental conditions.

Spinal cord hypothermia without systemic hypothermia

BACKGROUND AND PURPOSE

Hypothermia has been shown to be beneficial in the setting of acute SCI. However, widespread use has been hindered by the need for systemic hypothermia as the vehicle for achieving spinal cord hypothermia. This study demonstrates that localized spinal cord hypothermia can be achieved via a percutaneous approach while maintaining systemic normothermia.

MATERIALS AND METHODS

Five Yucatan swine underwent catheterization of the subarachnoid space and infusion of room temperature, chilled, and iced PL solutions into the cervical spinal canal, with drainage from the lumbar canal. Thermocouples were placed within the spinal cord and in the subarachnoid space and recorded during infusions and recovery from hypothermia.

RESULTS

Results demonstrated that hypothermia as low as 16.8°C is feasible in the spinal cord with retention of systemic normothermia, with strong (r = 0.95) correlation between the spinal cord temperature and the CSF temperature. Degrees of cooling varied with flow rates and with infusate temperature.

CONCLUSIONS

While the data are preliminary in a small group of animals, the ability to rapidly create a wide range of controlled spinal cord hypothermia while preserving normal body temperature warrants wider exploration. The study also indicates that further investigation of the hypothesis that CSF temperature monitoring may be an acceptable surrogate for direct spinal cord temperature monitoring should be pursued.

Experimental study and model validation of selective spinal cord and brain hypothermia induced by a simple torso-cooling pad

In vivo experiments have been performed to test the effectiveness of a torso-cooling pad to reduce the temperature in the spinal cord and brain in rats. Coolant was circulated through the cooling pad to provide either mild or moderate cooling. Temperatures in the brain tissue, on the head surface, and on the spine and back surfaces were measured. During mild cooling, the temperature on the back surface was 22.82 +/- 2.43 degrees C compared to 29.34 +/- 1.94 degrees C on the spine surface. The temperature on the back surface during moderate cooling was 13.66 +/- 1.28 degrees C compared to 24.12 +/- 5.7 degrees C on the spine surface. Although the temperature in the brain tissue did not drastically deviate from its baseline value during cooling, there was a difference between the rectal and brain temperatures during cooling, which suggests mild hypothermia in the brain tissue. Using experimental data, theoretical models of the rat head and torso were developed to predict the regional temperatures and to validate the rat models. There was good agreement between the theoretical and experimental temperatures in the torso region. Differences between the predicted and measured temperatures in the brain are likely to be the result of imperfect mixing between the cold spinal fluid and the warm cerebrospinal fluid that surrounds the brain.