Self-assembled polymeric micellar nanoparticles as nanocarriers for poorly soluble anticancer drug ethaselen

Preparation, Characterization, and Antioxidant Properties of Self-Assembled Nanomicelles of Curcumin-Loaded Amphiphilic Modified Chitosan

Curcumin (Cur) is a phytochemical with various beneficial properties, including antioxidant, anti-inflammatory, and anticancer activities. However, its hydrophobicity, poor bioavailability, and stability limit its application in many biological approaches. In this study, a novel amphiphilic chitosan wall material was synthesized. The process was carried out via grafting chitosan with succinic anhydride (SA) as a hydrophilic group and deoxycholic acid (DA) as a hydrophobic group; 1H-NMR, FTIR, and XRD were employed to characterize the amphiphilic chitosan (CS-SA-DA). Using a low-cost, inorganic solvent-based procedure, CS-SA-DA was self-assembled to load Cur nanomicelles. This amphiphilic polymer formed self-assembled micelles with a core-shell structure and a critical micelle concentration (CMC) of 0.093 mg·mL-1. Cur-loaded nanomicelles were prepared by self-assembly and characterized by the Nano Particle Size Potential Analyzer and transmission electron microscopy (TEM). The mean particle size of the spherical Cur-loaded micelles was 770 nm. The drug entrapment efficiency and loading capacities were up to 80.80 ± 0.99% and 19.02 ± 0.46%, respectively. The in vitro release profiles of curcumin from micelles showed a constant release of the active drug molecule. Cytotoxicity studies and toxicity tests for zebrafish exhibited the comparable efficacy and safety of this delivery system. Moreover, the results showed that the entrapment of curcumin in micelles improves its stability, antioxidant, and anti-inflammatory activity.

Co-delivery of paclitaxel and curcumin loaded solid lipid nanoparticles for improved targeting of lung cancer: In vitro and in vivo investigation

The objective of this study was to develop nanotechnology-mediated paclitaxel (PAC) and curcumin (CUR) co-loaded solid lipid nanoparticles (PAC-CUR-SLNs) for the treatment of lung cancer, which is a leading cause of death worldwide. Around 85 % cases of lungs cancer constitute non-small cell lung cancer (NSCLC). PAC-CUR-SLNs were prepared via high pressure homogenization. The in vitro drug release of PAC-CUR-SLNs was checked followed by their in vitro cytotoxic investigation using adenocarcinomic human alveolar basal epithelial cells (A549) cell lines. Anticancer effects along with side effects of the synergistic delivery of PAC-CUR-SLNs were studied in vivo, using BALB/c mice. PAC-CUR-SLNs were nano sized (190 nm), homogeneously disseminated particles with %IE of both PAC and CUR above 94 %. PAC-CUR-SLNs released PAC and CUR in a controlled fashion when compared with free drug suspensions. The cytotoxicity of PAC-CUR-SLNs was higher than individual drug-loaded SLNs and pure drugs. Moreover, the co-delivery displayed synergistic effect, indicating potential of PAC-CUR-SLNs in lung cancer treatment. In vivo tumor investigation of PAC-CUR-SLNs exhibited 12-fold reduced tumor volume and almost no change in body weight of BALB/c mice, when compared with the experimental groups including control group. The inhibition of tumor rate on day 28 was 82.7 % in the PAC-CUR-SLNs group, which was significantly higher than the pure drugs and monotherapies. It can be concluded that, encapsulating the co-loaded antitumor drugs like PAC-CUR in SLNs may help in improved targeting of the tumor with enhanced anticancer effect.

Self-Assembled Amphiphilic Chitosan Nanomicelles: Synthesis, Characterization and Antibacterial Activity

Although amphiphilic chitosan has been widely studied as a drug carrier for drug delivery, fewer studies have been conducted on the antimicrobial activity of amphiphilic chitosan. In this study, we successfully synthesized deoxycholic acid-modified chitosan (CS-DA) by grafting deoxycholic acid (DA) onto chitosan C2-NH2, followed by grafting succinic anhydride, to prepare a novel amphiphilic chitosan (CS-DA-SA). The substitution degree was 23.93% for deoxycholic acid and 29.25% for succinic anhydride. Both CS-DA and CS-DA-SA showed good blood compatibility. Notably, the synthesized CS-DA-SA can self-assemble to form nanomicelles at low concentrations in an aqueous environment. The results of CS, CS-DA, and CS-DA-SA against Escherichia coli and Staphylococcus aureus showed that CS-DA and CS-DA-SA exhibited stronger antimicrobial effects than CS. CS-DA-SA may exert its antimicrobial effect by disrupting cell membranes or forming a membrane on the cell surface. Overall, the novel CS-DA-SA biomaterials have a promising future in antibacterial therapy.

Nano-based formulations as an approach for providing a novel identity for organoselenium compounds

The organoselenium compounds belong to a class of synthetic molecules that displays a remarkable spectrum of promising pharmacological properties. Despite the huge amount of preclinical data that supports a bright outlook for organoselenium compounds, some toxicity issues and physicochemical limitations delay the development of more advanced studies. Currently, several scientific reports demonstrated that the association of nanotechnology has emerged as an alternative to improve solubility and safety issues of these molecules as well as enhance pharmacological properties. Therefore, our main objective was to address studies that reported the development and biological evaluations of nano-based formulations to synthetic organoselenium compounds incorporation by constructing an integrative literature review. The data survey was performed using the Science Direct, PubMed, Web of Science, and SCOPUS online databases, covering studies that were published from January 2011 up to October 2021. In the last decade, there has been an exponential growth in research regarding the incorporation of synthetic organoselenium compounds into distinct nanocarrier systems such as nanocapsules, nanoemulsions, micelles, and others, reinforcing that the association of such molecules and nanotechnology is a promising alliance. The reports investigated many nanosystems containing selenium organic molecules intending oral, intravenous, and cutaneous applications. Besides that, these systems were evaluated in a variety of in vitro techniques and in vivo models, concerning their pharmacological potential, biodistribution profile, and safety. In summary, the findings indicate that the production of nano-based formulations containing organoselenium compounds either improved physicochemical and biological properties or minimize toxicological issues of compounds.

Physicochemical Characterization and Pharmacological Evaluation of Novel Propofol Micelles with Low-Lipid and Low-Free Propofol

We developed safe and stable mixed polymeric micelles with low lipids and free propofol for intravenous administration, to overcome the biological barrier of the reticuloendothelial system (RES), reduce pain upon injection, and complications of marketed propofol formulation. The propofol-mixed micelles were composed of distearoyl-phosphatidylethanolamine-methoxy-poly (ethylene glycol 2000) (DSPE mPEG2k) and Solutol HS 15 and were optimized using Box Behnken design (BBD). The optimized formulation was evaluated for globule size, zeta potential, loading content, encapsulation efficiency, pain on injection, histological evaluation, hemolysis test, in vivo anesthetic action, and pharmacokinetics, in comparison to the commercialized emulsion Diprivan. The optimized micelle formulation displayed homogenous particle sizes, and the free drug concentration in the micelles was 60.9% lower than that of Diprivan. The paw-lick study demonstrated that propofol-mixed micelles significantly reduced pain symptoms. The anesthetic action of the mixed micelles were similar with the Diprivan. Therefore, we conclude that the novel propofol-mixed micelle reduces injection-site pain and the risk of hyperlipidemia due to the low content of free propofol and low-lipid constituent. It may be a more promising clinical alternative for anesthetic.

Stromal Barrier-Dismantled Nanodrill-Like and Cancer Cell-Targeted pH-Responsive Polymeric Micelles for Further Enhancing the Anticancer Efficacy of Doxorubicin

Cancer-associated fibroblasts (CAFs) were believed to establish a tight physical barrier and a dense scaffold for tumor cells to make them maintain immunosuppression and drug resistance, strongly hindering nanoparticles to penetrate into the core of tumor tissues and limiting the performance of tumor cell-targeted nanoparticles. Here, we fabricated the substrate Z-Gly-Pro of fibroblast activation protein α (FAPα) and folic acid-codecorated pH-responsive polymeric micelles (dual ligand-modified PEOz-PLA polymeric micelles, DL-PP-PMs) that possessed nanodrill and tumor cell-targeted functions based on Z-Gly-pro-conjugated poly(2-ethyl-2-oxazoline)-poly(D,l-lactide) (ZGP-PEOz-PLA), folic acid (FA)-conjugated PEOz-PLA (FA-PEOz-PLA), and PEOz-PLA for cancer therapy. The micelles with about 40 nm particle size and a narrow distribution exhibited favorable pH-activated endo/lysosome escape induced by their pH responsibility. In addition, the enhancement of in vitro cellular uptake and cytotoxicity to folate receptors or FAPα-positive cells for doxorubicin (DOX)/DL-PP-PMs compared with DOX/PP-PMs evidenced the dual target ability of DOX/DL-PP-PMs, which was further supported by in vivo biodistribution results. As expected, in the human oral epidermal carcinoma (KB) cells xenograft nude mice model, the remarkable enhancement of antitumor efficacy for DOX/DL-PP-PMs with low toxicity was observed compared with DOX/FA-PP-PMs and DOX/ZGP-PP-PMs. The possible mechanism was elucidated to be the dismantling of the stromal barrier by nanodrill-like DOX/DL-PP-PMs via the deletion of CAFs evidenced by the downregulation of α-SMA and inhibition of their functions proved by the decrease in the microvascular density labeled with CD31 and the reduction in the extracellular matrix detected by the collagen content, thereby promoting tumor penetration and enhancing their uptake by tumor cells. The present research offered an alternative approach integrating anticancer and antifibrosis effects in one delivery system to enhance the delivery efficiency and therapeutic efficacy of anticancer drugs.

Formulations Based on Drug Loaded Aptamer-Conjugated Liposomes as a Viable Strategy for the Topical Treatment of Basal Cell Carcinoma-In Vitro Tests

Topical liposomal drug formulations containing AS1411-aptamer conjugated liposomes were designed to deliver in a sustained way the 5-fluorouracil to the tumor site but also to increase the compliance of patients with basal cell carcinoma. The 5-fluorouracil penetrability efficiency through the Strat-M membrane and the skin irritation potential of the obtained topical liposomal formulations were evaluated in vitro and the Korsmeyer Peppas equation was considered as the most appropriate to model the drug release. Additionally, the efficiency of cytostatic activity for targeted antitumor therapy and the hemolytic capacity were performed in vitro. The obtained results showed that the optimal liposomal formulation is a crosslinked gel based on sodium alginate and hyaluronic acid containing AS1411-aptamer conjugated liposomes loaded with 5-fluorouracil, which appeared to have favorable biosafety effects and may be used as a new therapeutic approach for the topical treatment of basal cell carcinoma.

Bio-Inspired Amphoteric Polymer for Triggered-Release Drug Delivery on Breast Cancer Cells Based on Metal Coordination

Nanoscale coordination polymers are promising vehicles for anticancer drug delivery because their surface composition and particle size can be tuned to exploit the enhanced permeability and retention effect, and their reversible interaction with metal cations enables triggered drug release at the tumor site. Here, we develop a novel nanoscale coordination polymer using the diblock copolymer poly(2-methacryloyloxyethyl phosphorylcholine)-block-poly(serinyl acrylate) (PMPC-b-PserA) and demonstrate its use for encapsulation of a hydrophobic drug and triggered drug release to induce breast cancer cell apoptosis in vitro. The zwitterionic PMPC block was inspired by the antifouling structure of cell membranes, and the PserA block was inspired by the amphoteric amino acids of proteins. The polymer was synthesized by reversible addition-fragmentation chain transfer polymerization, and a mixture of the polymer and FeCl3 self-assembled into nanoparticles via complexation of Fe3+ with PserA, with the hydrophilic PMPC block at the particle surface. At a molar ratio of Fe3+ to serA of 3:1, the hydrodynamic diameter of the particles was 22.2 nm. Curcumin, a natural water-insoluble polyphenol used to enhance the effects of chemotherapeutics, was encapsulated in the particles as an oil-in-water emulsion, with an encapsulation efficiency of 99.6% and a particle loading capacity of 32%. Triggered release of curcumin was achieved by adding deferoxamine, an FDA-approved Fe3+ chelating agent; curcumin release efficiency increased at higher deferoxamine concentrations and lower pH. Triggered release of curcumin induced apoptosis in human triple-negative breast cancer cells; cell viability decreased to 34.3% after 24 h of treatment with the curcumin-loaded nanoparticles and deferoxamine, versus >80% viability without deferoxamine to trigger drug release. The biocompatibility, tunable composition and size, high hydrophobic drug loading, and triggered-release capability of this nanoscale coordination polymer make it well-suited for use in anticancer drug delivery.

Dextran/poly-L-arginine multi-layered CaCO3-based nanosystem for vascular drug delivery

The development of heterogeneous drug delivery systems leads to innovative strategies for targeted therapy of common pathologies, such as cancer, immunological and neurological disorders. Nowadays, it is possible to choose among a great variety of nanoparticles on the basis of the needs they have to satisfy. However, a candidate for the treatment of cardiovascular pathologies is still missing. In this context, a targeted therapy implies the conceptualization of nanoparticles that take active part in the treatment of vascular pathologies. The aim of this work was to provide a method to produce multi-layered calcium carbonate (CaCO₃) nanoparticles encapsulating a model protein, bovine serum albumin, with model antibodies on their surface. CaCO₃ nanoparticles were produced by the combination of complex coacervation and mineralization and were engineered using layer-by-layer technique with a polysaccharide, dextran sulfate, and a homo-poly-amino acid, poly-L-arginine. Morphology, biocompatibility, cellular uptake, influence on cell expression of the inflammatory marker matrix metalloproteinase-9, and hemocompatibility of the nanoparticles were studied. The presence of the dextran/poly-L-arginine layers did not negatively affect the nanoparticle overall characteristics and they did not trigger proinflammatory response in vitro. Taking together all the obtained results, we consider the proposed CaCO₃ nanoparticles as a promising tool in cardiovascular field.

Glabrescione B delivery by self-assembling micelles efficiently inhibits tumor growth in preclinical models of Hedgehog-dependent medulloblastoma

Aberrant activation of the Hedgehog (Hh) pathway leads to the development of several tumors, including medulloblastoma (MB), the most common pediatric brain malignancy. Hh inhibitors acting on GLI1, the final effector of Hh signaling, offer a valuable opportunity to overcome the pitfalls of the existing therapies to treat Hh-driven cancers. In this study, the toxicity, delivery, biodistribution, and anticancer efficacy of Glabrescione B (GlaB), a selective GLI1 inhibitor, were investigated in preclinical models of Hh-dependent MB. To overcome its poor water solubility, GlaB was formulated with a self-assembling amphiphilic polymer forming micelles, called mPEG_5kDa-cholane. mPEG_5kDa-cholane/GlaB showed high drug loading and stability, low cytotoxicity, and long permanence in the bloodstream. We found that mPEG_5kDa-cholane efficiently enhanced the solubility of GlaB, thus avoiding the use of organic solvents. mPEG_5kDa-cholane/GlaB possesses favorable pharmacokinetics and negligible toxicity. Remarkably, GlaB encapsulated in mPEG_5kDa-cholane micelles was delivered through the blood-brain barrier and drastically inhibited tumor growth in both allograft and orthotopic models of Hh-dependent MB. Our findings reveal that mPEG_5kDa-cholane/GlaB is a good candidate for the treatment of Hh-driven tumors and provide relevant implications for the translation of GlaB into clinical practice.

In vitro anticancer evaluation of micelles containing N-(4-(2-((4-methoxybenzyl)amino)ethyl)phenyl)heptanamide, an analogue of fingolimod

Fingolimod has been evaluated for use as an anticancer agent. However, many steps are required to synthesize fingolimod because of its intricate structure. A fingolimod analogue, N-(4-(2-((4-methoxybenzyl)amino)ethyl)phenyl)heptanamide (MPH), also has anti-cancer effects and is easier to synthesize but is poorly soluble in water. To compensate for its poor water solubility, MPH-loaded polymeric micelles were prepared by thin film hydration method using various polymers and the physicochemical properties of the MPH-loaded micelles such as particle size, drug-loading (DL, %), and encapsulation efficiency (EE, %) were evaluated. A storage stability test was conducted to select the final formulation and the release profile of the MPH-loaded micelles was confirmed by in vitro release assay. MPH-loaded mPEG-b-PLA micelles were selected for further testing based on their stability and physicochemical properties; they were stable for stable for 14 days at 4 °C and 25 °C and for 7 days at 37 °C. They showed anti-cancer efficacy against both A549 and U87 cancer cells. Encapsulation of MPH in polymeric micelles did not decrease the in vitro cytotoxicity of MPH. The findings of this study lay the groundwork for future formulations that enable the effective and stable delivery of poorly water-soluble agents.

A glance over doxorubicin based-nanotherapeutics: From proof-of-concept studies to solutions in the market

Cancer is one of the leading causes of death worldwide and, as such, efforts are being done to find new chemotherapeutic drugs or, alternatively, novel approaches for the delivery of old ones. In this scope, when used as vehicles for drugs, nanomaterials may potentially maximize the efficacy of the treatment and reduce its side effects, for example by a change in drug's pharmacokinetics, cell targeting and/or specific stimuli-responsiveness. This is the case of doxorubicin (DOX) that presents a broad spectrum of activity and is one of the most widely used chemotherapeutic drugs as first-line treatment. Indeed, DOX is a very interesting example of a drug for which several nanosized delivery systems have been developed over the years. While it is true that some of these systems are already in the market, it is also true that research on this subject remains very active and that there is a continuing search for new solutions. In this sense, this review takes the example of doxorubicin, not so much with the focus on the drug itself, but rather as a case study around which very diverse and imaginative nanotechnology approaches have emerged.

Multi pH-sensitive polymer–drug conjugate mixed micelles for efficient co-delivery of doxorubicin and curcumin to synergistically suppress tumor metastasis

Multi pH-responsive polymer-drug conjugate mixed micelles were fabricated to co-deliver doxorubicin and curcumin for synergistic suppression tumor metastasis via inhibiting the invasion, migration, intravasation and extravasation of tumor cells.

Fabrication of Polymer Micelles with Zwitterionic Shell and Biodegradable Core for Reductively Responsive Release of Doxorubicin

To achieve a high stability in physiological environment and rapid intracellular drug release, a biodegradable zwitterionic triblock copolymer with a disulfide-linked poly-ε-caprolactone and polycarboxybetaine methacrylate (PCBMA-SS-PCL-SS-PCBMA) was prepared for micellar carrier to delivery doxorubicin (DOX) into tumor cells. PCBMA-SS-PCL-SS-PCBMA was obtained by following steps: i) introducing disulfide bonds through end-group modification of PCL diol with cystamine dihydrochloride; ii) preparing PCL-RAFT macromolecular chain transfer agent by EDC/NHS chemistry; iii) RAFT polymerization of zwitterionic monomer. Self-assembling from PCBMA-SS-PCL-SS-PCBMA, polymeric micelles had many advantages, such as ultra-low protein absorption in serum and obvious reduction-responsiveness in the presence of DTT. Furthermore, DOX-loaded micelles exhibited high stability upon centrifugation and lyophilization, a fast intracellular drug release and enhanced drug efficacy due to GSH-triggered PCBMA shell shedding and micellar reassembling. Thus, the polymeric micelles integrated several functions and properties could be prospectively utilized as valuable nanocarriers in cancer chemotherapeutics.

Chitosan grafted-poly(ethylene glycol) methacrylate nanoparticles as carrier for controlled release of bevacizumab

The aim of the present study is to obtain, for the first time, polymeric nanocarriers based on the chitosan grafted-poly(ethylene glycol) methacrylate derivative. The strategy involves the use of chitosan grafted-poly(ethylene glycol) methacrylate with high solubility in water, obtained via Michael addition, in order to prepare potentially non-toxic micro/nanoparticles (MNPs). By modifying chitosan, its solubility in aqueous media was improved. Micro/nanoparticles-based chitosan grafted-poly(ethylene glycol) methacrylate were obtained under mild condition, with good and controlled swelling properties in acetate buffer solution (ABS) and phosphate buffer solution (PBS). The technique selected for the preparation of the MNPs was a double crosslinking (ionic and covalent) process in reverse emulsion which provide the mechanical stability of the polymeric nanocarrier. The chitosan derivative and MNPs were thoroughly characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM). The Scanning Electron Microscopy photographs revealed that prepared MNPs have different diameters depending on the used stirring rate and polymer concentration. Nanoparticles potential as drug delivery system was analyzed by loading bevacizumab (BEV) a full-length monoclonal antibody. Also, the prepared particles were found suitable from the cytotoxicity and hemocompatibility point of view enabling their potential use as delivery system for the treatment of posterior segment of the eye conditions.

Smart nanocarrier-based drug delivery systems for cancer therapy and toxicity studies: A review

Nonspecific distribution and uncontrollable release of drugs in conventional drug delivery systems (CDDSs) have led to the development of smart nanocarrier-based drug delivery systems, which are also known as Smart Drug Delivery Systems (SDDSs). SDDSs can deliver drugs to the target sites with reduced dosage frequency and in a spatially controlled manner to mitigate the side effects experienced in CDDSs. Chemotherapy is widely used to treat cancer, which is the second leading cause of death worldwide. Site-specific drug delivery led to a keen interest in the SDDSs as an alternative to chemotherapy. Smart nanocarriers, nanoparticles used to carry drugs, are at the focus of SDDSs. A smart drug delivery system consists of smart nanocarriers, targeting mechanisms, and stimulus techniques. This review highlights the recent development of SDDSs for a number of smart nanocarriers, including liposomes, micelles, dendrimers, meso-porous silica nanoparticles, gold nanoparticles, super paramagnetic iron-oxide nanoparticles, carbon nanotubes, and quantum dots. The nanocarriers are described in terms of their structures, classification, synthesis and degree of smartness. Even though SDDSs feature a number of advantages over chemotherapy, there are major concerns about the toxicity of smart nanocarriers; therefore, a substantial study on the toxicity and biocompatibility of the nanocarriers has been reported. Finally, the challenges and future research scope in the field of SDDSs are also presented. It is expected that this review will be widely useful for those who have been seeking new research directions in this field and for those who are about to start their studies in smart nanocarrier-based drug delivery.

Drug-Polymer Interaction, Pharmacokinetics and Antitumor Effect of PEG-PLA/Taxane Derivative TM-2 Micelles for Intravenous Drug Delivery

PURPOSE

A novel polymer micelle was prepared with a high drug loading, good stability, high tolerance and better anti-tumor effect.

METHODS

TM-2 was encapsulated in poly-block-poly (D, L-lactic acid) self-assembled micelles by the thin-film hydration method. From the critical micelle concentrations of the copolymers, particle size, drug loading and encapsulation efficiency of drug-loading micelles, the appropriate polymer material could be assessed. Comparisons between TM-2 solution and TM-2 micelles were done to evaluate the pharmacokinetics and toxicity in rats, compared with Taxol to evaluate the anti-tumor effect in mice.

RESULTS

The optimized TM-2 micelles achieved a high drug loading (~20%) with the polymer material of PEG_2k-PLA_2.5k, with a particle size of 30 nm and no significant change in particle size after lyophilization. The result of pharmacokinetic experiment displayed that the half-life in vivo was obviously prolonged. The maximum tolerated dose of TM-2 micelles was approximately 25 mg/kg in rats, and the relative tumor growth rate of Taxol (15 mg/kg), TM-2 (10 mg/kg), TM-2 (15 mg/kg) and TM-2 (40 mg/kg) in mice were 49.35%, 49.14%, 36.44 and 9.98% respectively.

CONCLUSIONS

TM-2 micelles with high drug loading increased drug solubility, improved tolerance, antitumor effects and reduced toxicity.

Improved intestinal absorption of paclitaxel by mixed micelles self-assembled from vitamin E succinate-based amphiphilic polymers and their transcellular transport mechanism and intracellular trafficking routes

To ensure that antitumor drugs can be effectively transported across intestinal barrier and then quickly released in tumor cells, mixed polymeric micelles (Mix-PMs) were designed and fabricated by combining poly(2-ethyl-2-oxazoline)-vitamin E succinate (PEOz-VES) with TPGS1000 for enhancing intestinal absorption of paclitaxel. PEOz-VES exhibited an extremely low critical micelle concentration and negligible cytotoxicity. The Mix-PMs were characterized to have about 20 nm in diameter, uniform spherical morphology, high drug-loading content and sustained drug release profile with a retained pH-sensitivity. The results of the transport through Caco-2 cell monolayers and intestinal absorption revealed that Mix-PMs displayed higher transcellular transport efficiency compared with PEOz-VES micelles and Taxol^®. The possible mechanism of transcellular transport for Mix-PMs was elucidated to be mainly through clathrin- and caveolae/lipid rafts-mediated transcytosis. Confocal laser scanning micrographs revealed that late endosomes, lysosomes, endoplasmic reticulum, Golgi apparatus, and mitochondria were all involved in intracellular trafficking of Mix-PMs. The proteins involved in transcytosis of Mix-PMs and finally excreted were unraveled for the first time by the analysis of proteins in the basolateral media according to the proteomics method. Consequently, the fabricated mixed polymeric micelles may have great potential in enhancing intestinal absorption and accelerating drug release in tumor cells.

Concurrently suppressing multidrug resistance and metastasis of breast cancer by co-delivery of paclitaxel and honokiol with pH-sensitive polymeric micelles

To concurrently suppress multidrug resistance (MDR) and metastasis of breast cancer cells, paclitaxel (PTX) and honokiol (HNK) were coencapsulated into pH-sensitive polymeric micelles based on poly(2-ethyl-2-oxazoline)-poly(d,l-lactide) (PEOz-PLA). The physicochemical properties of dual drug-loaded PEOz-PLA micelles were characterized in size, drug loading and in vitro release. The efficiency of MDR reversal for the micelles was testified by synergetic enhancement of cytotoxicity and uptake by MCF-7/ADR cells. The flow cytometry and fluorescence polarization measurement results reinforced the conclusion that down-regulation of P-gp expression and increase of plasma membrane fluidity appeared to be possible mechanisms of MDR reversal by dual drug-loaded PEOz-PLA micelles. Further, the efficient inhibition of tumor metastasis by dual drug-loaded PEOz-PLA micelles was demonstrated by in vitro anti-invasion and anti-migration assessment in MDA-MB-231 cells and in vivo bioluminescence imaging in nude mice. The suppression of MDR and metastasis by the micelles was assigned to synergistic effects of pH-triggered drug release and HNK/PEOz-PLA-aroused P-gp inhibition, and pH-triggered drug release and PTX/HNK-aroused MMPs inhibition, respectively. In conclusion, our findings strengthen the usefulness of co-delivery of PTX and HNK by pH-responsive polymeric micelles for suppression of tumor MDR and metastasis.

STATEMENT OF SIGNIFICANCE

Multidrug resistance (MDR) and metastasis are considered to be two of the major barriers for successful chemotherapy. The combination of a chemotherapeutic drug with a modulator has emerged as a promising strategy for efficiently treating MDR cancer and preventing tumor metastasis. Herein, a dual drug (paclitaxel and honokiol)-loaded pH-sensitive polymeric micelle system based on PEOz-PLA was successfully fabricated to ensure that tumor MDR and metastasis could be concurrently suppressed, therefore achieving distinguishing endo/lysosomal pH from physiological pH by accelerating drug release and then enhancing the cytotoxicity of paclitaxel to drug-resistant tumor cells MCF-7/ADR by increasing cellular uptake of paclitaxel, preventing in vitro invasion and migration for MDA-MB-231 cells and in vivo metastasis in nude mice. Further, the mechanism of MDR reversal by dual drug-loaded PEOz-PLA micelles was elucidated to be down-regulation of P-gp expression and increase of plasma membrane fluidity of MCF-7/ADR cells. The present findings strengthen the usefulness of co-delivery of PTX and HNK by pH-responsive polymeric micelles for suppression of tumor MDR and metastasis.

Effective use of nanocarriers as drug delivery systems for the treatment of selected tumors

Nanotechnology has recently gained increased attention for its capability to effectively diagnose and treat various tumors. Nanocarriers have been used to circumvent the problems associated with conventional antitumor drug delivery systems, including their nonspecificity, severe side effects, burst release and damaging the normal cells. Nanocarriers improve the bioavailability and therapeutic efficiency of antitumor drugs, while providing preferential accumulation at the target site. A number of nanocarriers have been developed; however, only a few of them are clinically approved for the delivery of antitumor drugs for their intended actions at the targeted sites. The present review is divided into three main parts: first part presents introduction of various nanocarriers and their relevance in the delivery of anticancer drugs, second part encompasses targeting mechanisms and surface functionalization on nanocarriers and third part covers the description of selected tumors, including breast, lungs, colorectal and pancreatic tumors, and applications of relative nanocarriers in these tumors. This review increases the understanding of tumor treatment with the promising use of nanotechnology.

Physicochemical properties of polymers: An important system to overcome the cell barriers in gene transfection

Delivery of the macromolecules including DNA, miRNA, and antisense oligonucleotides is typically mediated by carriers due to the large size and negative charge. Different physical (e.g., gene gun or electroporation), and chemical (e.g., cationic polymer or lipid) vectors have been already used to improve the efficiency of gene transfer. Polymer-based DNA delivery systems have attracted special interest, in particular via intravenous injection with many intra- and extracellular barriers. The recent progress has shown that stimuli-responsive polymers entitled as multifunctional nucleic acid vehicles can act to target specific cells. These nonviral carriers are classified by the type of stimulus including reduction potential, pH, and temperature. Generally, the physicochemical characterization of DNA-polymer complexes is critical to enhance the transfection potency via protection of DNA from nuclease digestion, endosomal escape, and nuclear localization. The successful clinical applications will depend on an exact insight of barriers in gene delivery and development of carriers overcoming these barriers. Consequently, improvement of novel cationic polymers with low toxicity and effective for biomedical use has attracted a great attention in gene therapy. This article summarizes the main physicochemical and biological properties of polyplexes describing their gene transfection behavior, in vitro and in vivo. In this line, the relative efficiencies of various cationic polymers are compared.

Recent advances in polymeric micelles for anti-cancer drug delivery

Block co-polymeric micelles receive increased attention due to their ability to load therapeutics, deliver the cargo to the site of action, improve the pharmacokinetic of the loaded drug and reduce off-target cytotoxicity. While polymeric micelles can be developed with improved drug loading capabilities by modulating hydrophobicity and hydrophilicity of the micelle forming block co-polymers, they can also be successfully cancer targeted by surface modifying with tumor-homing ligands. However, maintenance of the integrity of the self-assembled system in the circulation and disassembly for drug release at the site of drug action remain a challenge. Therefore, stimuli-responsive polymeric micelles for on demand drug delivery with minimal off-target effect has been developed and extensively investigated to assess their sensitivity. This review focuses on discussing various polymeric micelles currently utilized for the delivery of chemotherapeutic drugs. Designs of various stimuli-sensitive micelles that are able to control drug release in response to specific stimuli, either endogenous or exogenous have been delineated.

Enhanced antitumor efficacy by cyclic RGDyK-conjugated and paclitaxel-loaded pH-responsive polymeric micelles

Cyclic RGDyK (cRGDyK)-conjugated pH-sensitive polymeric micelles were fabricated for targeted delivery of paclitaxel to prostate cancer cells based on pH-sensitive copolymer poly(2-ethyl-2-oxazoline)-poly(D,L-lactide) (PEOz-PLA) and cRGDyK-PEOz-PLA to enhance antitumor efficacy. The prepared micelles with an average diameter of about 28nm exhibited rapid release behavior at endo/lysosome pH, effectively enhanced the cytotoxicity of paclitaxel to PC-3 cells by increasing the cellular uptake, which was correlated with integrin αvβ3 expression in tumor cells. The active targeting activity of the micelles was further confirmed by in vivo real time near-infrared fluorescence imaging in PC-3 tumor-bearing nude mice. Moreover, the active targeting and pH-sensitivity endowed cRGDyK-conjugated micelles with a higher antitumor effect in PC-3 xenograft-bearing nude mice compared with unmodified micelles and Taxol with negligible systemic toxicity. Therefore, these results suggested that cRGDyK-conjugated pH-sensitive polymeric micelles may be a promising delivery system for efficient delivery of anticancer drugs to treat integrin αvβ3-rich prostate cancers.

Which polymer is more suitable for etoposide: A comparison between two kinds of drug loaded polymeric micelles in vitro and in vivo?

In this paper, we systemly compared the two kinds of VP16 (etoposide) loaded polymers micelles, monomethyl poly (ethylene glycol)-poly (lactic acid) (MPEG-PDLLA) and monomethyl poly (ethylene glycol)-poly (ϵ-caprolactone) (MPEG-PCL) in vitro and in vivo. Molecular modeling study was used as a novel means to compare the two formulations. In vitro, the micelle samples were fully characterized by TEM, XRD, drug loading (DL), Encapsulation efficiency (EE), stability and MTT. The stability study revealed that MPEG-PDLLA-VP16 had the significant advantage of 100% drug retention within 48 h compared to MPEG-PCL-VP16 with 40%, conform to the computer simulation model results. Cellular uptake figured that MPEG-PDLLA-VP16 had a 7 times larger uptake rate in the H460 cell line. In vivo, pharmacodynamics results showed MPEG-PDLLA-VP16 perform no significant difference with VP16 clinical formulations (10, 20mg/kg). However, MPEG-PCL-VP16 had no difference between different dosages on anticancer activities. Plasma pharmacokinetics results showed that the two micelle formulations prolong the half-life of VP16 twice than that of VP16 clinical formulations. In conclusion, micelle were better choice for cancer treatment on reducing drug toxic. In this study, the results also indicated that MPEG-PDLLA was more suitable for VP16 than MPEG-PCL as a more promising formulation for clinical cancer treatment.

pH-responsive polymeric micelles based on poly(2-ethyl-2-oxazoline)-poly(D,L-lactide) for tumor-targeting and controlled delivery of doxorubicin and P-glycoprotein inhibitor

The combination of a chemotherapeutic drug with a P-glycoprotein (P-gp) inhibitor has emerged as a promising strategy for treating multidrug resistance (MDR) cancer. To ensure that two drugs can be co-delivered to the tumor region and quickly released in tumor cells, tumor-targeted and pH-sensitive polymeric micelles were designed and prepared by combining cationic ring-opening polymerization of 2-ethyl-2-oxazoline (EOz) with anionic ring-opening polymerization of D,L-lactide (LA), and then encapsulating doxorubicin (DOX) and D-alpha-tocopheryl polyethylene glycol 1000 succinate (TPGS1000) into the micelles self-assembled by poly(2-ethyl-2-oxazoline)-poly(D,L-lactide) (PEOz-PLA) and DSPE-PEG-folate. PEOz-PLA exhibited a low critical micelle concentration and negligible cytotoxicity. The micelles enabled the rapid release of DOX when pH decreased from 7.4 to 5.0. The targeting ability of the micelles was demonstrated by in vitro flow cytometry in KBv cells and in vivo real time near-infrared fluorescence imaging in KBv tumor-bearing nude mice. The efficiency of MDR reversion for the micelles was testified by enhancement of intracellular DOX accumulation and cytotoxicity. The efficient drug delivery by the micelles was attributed to synergistic effects of folate-mediated targeting, pH-triggered drug release and TPGS1000-aroused P-gp inhibition. Therefore, the designed multifunctional polymeric micelles may have significant promise for therapeutic application of MDR cancer.

Endosomal pH-Responsive Polymer-Based Dual-Ligand-Modified Micellar Nanoparticles for Tumor Targeted Delivery and Facilitated Intracellular Release of Paclitaxel

PURPOSE

The purpose of the present study was to design and fabricate endosomal pH-sensitive dual-ligand-modified micellar nanoparticles to achieve enhanced drug delivery to tumor cells and facilitated intracellular drug release.

METHODS

End-group-carboxylated poly(2-ethyl-2-oxazoline)-poly(D,L-lactide) and cyclic Arg-Gly-Asp-Tyr-Lys- and anti-prostate specific membrane antigen antibody-modified diblock copolymer poly(2-ethyl-2-oxazoline)-poly(D,L-lactide) were synthesized and characterized by (1)H NMR and gel permeation chromatography, and self-assembled into micelles. Paclitaxel-loaded dual-ligand-modified micelles were prepared by thin-film hydration method, and characterized by dynamic light scattering, transmission electron microscope, pH-dependent in vitro release and stability. Intracellular paclitaxel delivery was measured by flow cytometry and imaged by confocal microscopy. In vitro cytotoxicity was studied in the 22Rv1 xenograft prostate tumor cell lines.

RESULTS

The prepared dual-ligand-modified micelles with about 30 nm in diameter and rapid intracellular drug release behavior at endo/lysosomal pH were very effective in enhancing the cytotoxicity of paclitaxel against 22Rv1 cells by increasing the cellular uptake, which was verified the correlation with the expression of integrin αvβ3 and prostate specific membrane antigen in tumor cells by flow cytometric analysis and confocal microscopy, compared with single ligand-modified micelles.

CONCLUSION

These findings provided valuable information that the application of combining of dual-ligand modifications with pH-sensitivity to polymeric micelles may be a promising approach in the efficient delivery of anticancer drugs for treatment of integrin αvβ3 and prostate specific membrane antigen expressing prostate cancers.

PSMA-mediated endosome escape-accelerating polymeric micelles for targeted therapy of prostate cancer and the real time tracing of their intracellular trafficking

The cytotoxicity of chemotherapeutic agents to healthy organs and drug resistance of tumor cells are believed to be the main obstacles to the successful cancer chemotherapy in the clinic. To ensure that anticancer drugs could be delivered to the tumor region, are quickly released from carriers in tumor cells and rapidly escape from endo/lysosomes, YPSMA-1-modified pH-sensitive polymeric micelles, which would be advantageous in recognizing the prostate specific membrane antigen (PSMA), were designed and fabricated for targeted delivery of paclitaxel to tumors based on the pH-sensitive diblock copolymer poly(2-ethyl-2-oxazoline)-poly(D,L-lactide) (PEOz-PLA) and YPSMA-1-PEOz-PLA for treating prostate cancer. HOOC-PEOz-PLA with a critical micelle concentration of 5.0 mg L(-1) was synthesized and characterized by (1)H NMR and gel permeation chromatography. The prepared YPSMA-1-modified micelles, about 30 nm in diameter, exhibited a rapid release behavior at endo/lysosome pH and a favorable ability of fast endo/lysosome escape as observed by confocal microscopy. More importantly, we evidenced for the first time that both endosome and lysosome escape existed for pH-sensitive micelles via real time tracing using confocal microscopy, and the real time endo/lysosome escape process was also presented. The YPSMA-1-modified micelles were very effective in enhancing the cytotoxicity of paclitaxel by increasing the cellular uptake in PSMA-positive 22Rv1 cells, which was verified the correlation with PSMA expression in tumor cells by flow cytometric analysis and confocal microscopy. Moreover, the active targeting and pH-sensitivity endowed YPSMA-1-modified micelles with a higher antitumor efficacy and negligible systemic toxicity in 22Rv1 xenograft-bearing nude mice compared with unmodified micelles and Taxol®. These results suggested that the application of combining YPSMA-1 modification with pH-sensitivity to polymeric micelles may be one approach in the efficient delivery of anticancer drugs for treating PSMA-positive prostate cancers.

Fmoc-conjugated PEG-vitamin E2 micelles for tumor-targeted delivery of paclitaxel: enhanced drug-carrier interaction and loading capacity

The purpose of this study is to develop an improved drug delivery system for enhanced paclitaxel (PTX) loading capacity and formulation stability based on PEG5K-(vitamin E)2 (PEG5K-VE2) system. PEG5K-(fluorenylmethoxycarbonyl)-(vitamin E)2 (PEG5K-FVE2) was synthesized using lysine as the scaffold. PTX-loaded PEG5K-FVE2 micelles were prepared and characterized. Fluorescence intensity of Fmoc in the micelles was measured as an indicator of drug-carrier interaction. Cytotoxicity of the micelle formulations was tested on various tumor cell lines. The therapeutic efficacy and toxicity of PTX-loaded micelles were investigated using a syngeneic mouse model of breast cancer (4T1.2). Our data suggest that the PEG5K-FVE2 micelles have a low CMC value of 4 μg/mL and small sizes (~60 nm). The PTX loading capacity of PEG5K-FVE2 micelles was much higher than that of PEG5K-VE2 micelles. The Fmoc/PTX physical interaction was clearly demonstrated by a fluorescence quenching assay. PTX-loaded PEG5K-FVE2 micelles exerted more potent cytotoxicity than free PTX or Taxol formulation in vitro. Finally, intravenous injection of PTX-loaded PEG5K-FVE2 micelles showed superior anticancer activity compared with PEG5K-VE2 formulation with minimal toxicity in a mouse model of breast cancer. In summary, incorporation of a drug-interactive motif (Fmoc) into PEG5K-VE2 micelles represents an effective strategy to improve the micelle formulation for the delivery of PTX.

Evaluation of polyethylene glycol-conjugated novel polymeric anti-tumor drug for cancer therapy

A novel polymeric prodrug (PXPEG) was prepared to enhance the solubility of an anti-cancer drug, paclitaxel, in aqueous solutions and decrease the cytotoxicity by PEGylation, which means PEG attached to another molecule. In addition, the targeting ligand, transferrin (TF), was modified to PXPEG to enhance the therapeutic efficacy. The targeting ligand-modified PXPEG (TFPXPEG) was examined by (1)H-NMR to confirm the successful synthesis. The synthesized TFPXPEG had better solubility than the free drug against aqueous solution. The particle size of TFPXPEG was approximately 197.2nm and it had a spherical shape. The MTT assay showed that the anti-tumor efficiency of TFPXPEG was better than that of TF-unmodified PXPEG. In the KB tumor-bearing mouse model, the tumor volume of TFPXPEG treated groups was decreased dramatically by more than 2 fold or 3 fold compared to the PBS or PXPEG treated groups. The in vitro and in vivo evaluation showed that TFPXPEG had better efficacy than that of PXPEG due to the targeting effect of targeting ligands, such as TF.

Development of a folate-modified curcumin loaded micelle delivery system for cancer targeting

Targeted drug delivery system for tumor cells is an appealing platform on enhancing the therapeutic effects and reducing the side effects of the drug. In this study, we developed folate-modified curcumin (Cur) loaded micelles (Cur-FPPs) for cancer chemotherapy. The targeting material, Folate-PEG3000-PLA2000, was synthesized by the amide bond formation reaction. And the Cur loaded micelles were prepared by thin-film hydration method with mPEG2000-PLA2000 (Cur-PPs) or mPEG2000-PLA2000 and Folate-PEG3000-PLA2000 (Cur-FPPs) as carrier. A central composite design (CCD) was used to optimize the formulation, and the optimized Cur-FPPs was prepared with the weight ratio of Folate-PEG3000-PLA2000 and mPEG2000-PLA2000 at 1:9. The average size of the mixed micelles was 70nm, the encapsulating efficiency and drug-loading were 80.73±0.16% and 4.84±0.01%, respectively. Compared with the Cur propylene glycol solution, the in vitro release of Cur from Cur-FPPs showed a sustained manner. Furthermore, the in vitro cytotoxicity and cellular uptake of Cur-FPPs were significantly enhanced towards MCF-7 and HepG2 cells. The pharmacokinetic studies in rats indicated that a 3-fold increase in the half-life was achieved for Cur loaded micelle formulations relative to solubilized Cur. All the results demonstrated that folate-modified Cur micelles could serve as a potential nanocarrier to improve the solubility and anti-cancer activity of Cur.

Fluorescence imaging enabled biodegradable photostable polymeric micelles

Amphiphilic biodegradable photoluminescent polymers (ABPLPs) composed of a biodegradable fluorescent polymer and methoxy poly (ethyleneglycol) demonstrate intrinsic bright, tunable, and stable fluorescence emission. ABPLP micelles elicit minor cellular toxicity and can be used for cell and tissue imaging both in vitro and in vivo.

Telodendrimer-based nanocarriers for the treatment of ovarian cancer

PEG-dendritic block copolymer (telodendrimer) is a unique class of polymers with well-defined structures and tunable aggregation properties, which have been recently developed as novel micelle-based nanocarriers. This new class of nanocarrier is highly versatile, robust, multifunctional and has many unique properties for drug delivery that are superior to most other nanocarriers reported in the literature. Reversible crosslinking of micelles is able to minimize the premature drug release during circulation. These crosslinks can be reversed with endogenous and/or exogenous stimuli. To further facilitate the precise delivery of nanoparticle drugs to cancer cells, the nanoparticles surface can be decorated with ovarian cancer targeting ligands. This review is focused on the various strategies used for the design, preparation, pharmacokinetic, biodistribution and preclinical therapeutic applications of telodendrimer-based nanocarriers for drug delivery in the treatment of ovarian cancer. Lastly, future perspectives for the development of ovarian cancer-targeting telodendrimer nanotherapeutics are also explored.

Inhibition mechanism of P-glycoprotein mediated efflux by mPEG-PLA and influence of PLA chain length on P-glycoprotein inhibition activity

The present study aimed to investigate the effect of monomethoxy poly(ethylene glycol)-block-poly(D,L-lactic acid) (mPEG-PLA) on the activity of P-glycoprotein (P-gp) in Caco-2 cells and further unravel the relationship between PLA chain length in mPEG-PLA and influence on P-gp efflux and the action mechanism. The transport results of rhodamine 123 (R123) across Caco-2 cell monolayers suggested that mPEG-PLA unimers were responsible for its P-gp inhibitory effect. Furthermore, transport studies of R123 revealed that the inhibitory potential of P-gp efflux by mPEG-PLA analogues was strongly correlated with their structural features and showed that the hydrophilic mPEG-PLA copolymers with an intermediate PLA chain length and 10.20 of hydrophilic-lipophilic balance were more effective at inhibiting P-gp efflux in Caco-2 cells. The fluorescence polarization measurement results ruled out the plasma membrane fluidization as a contributor for inhibition of P-gp by mPEG-PLA. Concurrently, mPEG-PLA inhibited neither basal P-gp ATPase (ATP is adenosine triphosphate) activity nor substrate stimulated P-gp ATPase activity, suggesting that mPEG-PLA seemed not to be a substrate of P-gp and a competitive inhibitor. No evident alteration in P-gp surface level was detected by flow cytometry upon exposure of the cells to mPEG-PLA. The depletion of intracellular ATP, which was likely to be a result of partial inhibition of cellular metabolism, was directly correlated with inhibitory potential for P-gp mediated efflux by mPEG-PLA analogues. Hence, intracellular ATP-depletion appeared to be possible explanation to the inhibition mechanism of P-gp by mPEG-PLA. Taken together, the establishment of a relationship between PLA chain length and impact on P-gp efflux activity and interpretation of action mechanism of mPEG-PLA on P-gp are of fundamental importance and will facilitate future development of mPEG-PLA in the drug delivery area.

Critical evaluation of biodegradable polymers used in nanodrugs

Use of biodegradable polymers for biomedical applications has increased in recent decades due to their biocompatibility, biodegradability, flexibility, and minimal side effects. Applications of these materials include creation of skin, blood vessels, cartilage scaffolds, and nanosystems for drug delivery. These biodegradable polymeric nanoparticles enhance properties such as bioavailability and stability, and provide controlled release of bioactive compounds. This review evaluates the classification, synthesis, degradation mechanisms, and biological applications of the biodegradable polymers currently being studied as drug delivery carriers. In addition, the use of nanosystems to solve current drug delivery problems are reviewed.

Preparation of hierarchical mesoporous CaCO3 by a facile binary solvent approach as anticancer drug carrier for etoposide

To develop a nontoxic system for targeting therapy, a new highly ordered hierarchical mesoporous calcium carbonate nanospheres (CCNSs) as small drug carriers has been synthesized by a mild and facile binary solvent approach under the normal temperature and pressure. The hierarchical structure by multistage self-assembled strategy was confirmed by TEM and SEM, and a possible formation process was proposed. Due to the large fraction of voids inside the nanospheres which provides space for physical absorption, the CCNSs can stably encapsulate the anticancer drug etoposide with the drug loading efficiency as high as 39.7 wt.%, and etoposide-loaded CCNS (ECCNS) nanoparticles can dispersed well in the cell culture. Besides, the drug release behavior investigated at three different pH values showed that the release of etoposide from CCNSs was pH-sensitive. MTT assay showed that compared with free etoposide, ECCNSs exhibited a higher cell inhibition ratio against SGC-7901 cells and also decreased the toxicity of etoposide to HEK 293 T cells. The CLSM image showed that ECCNSs exhibited a high efficiency of intracellular delivery, especially in nuclear invasion. The apoptosis test revealed that etoposide entrapped in CCNSs could enhance the delivery efficiencies of drug to achieve an improved inhibition effect on cell growth. These results clearly implied that the CCNSs are a promising drug delivery system for etoposide in cancer therapy.

Preclinical safety evaluation of rAd5-hTERTC27 by intravenous injection

The safety of rAd5-hTERTC27, a replication defective adenovirus vector carrying hTERTC27 for possible use against hepatocellular carcinoma (HCC) was assessed. In single-dose evaluations, intravenous dose levels of up to 2×10(11)VP/kg in rats and 9×10(10)VP/kg in monkeys were well tolerated with no abnormal changes in general signs, body weight and food consumption, and no significant differences in biochemical parameters, urinalysis, ECG, and systemic necropsy observations between the rAd5 groups and solvent control group except that slight hematological change was observed. No hemolytic effect using rabbit blood, local perivasculitis following intravenous injection in rabbits or systemic anaphylaxis in guinea pigs following intravenous dosing was seen. No effects on the central nervous system of mice occurred following intravenous dosing with the exception of an increase in sleep duration at the dose of 1.2×10(11)VP/kg (p<0.05) but not at lower doses of 2×10(10) and 6×10(10)VP/kg in the hypnotic synergism test. These results demonstrate that administration of rAd5-hTERTC27 was well tolerated in an initial set of safety studies as part of an evaluation to allow human trials for the treatment of HCC.