Fluorescent and colourimetric 1, 8-naphthalimide-appended chemosensors for the tracking of metal ions: selected examples from the year 2010 to 2017

Application of RET Approach for Ratiometric Response Enhancement of ICT Fluorescent Hg2+ Probe based on Crown-containing Styrylpyridinium Dye

Styrylpyridinium dye bearing azadithia-15-crown-5 ether receptor group SP and 4-alkoxy-1,8-naphthalimide fluorophore were linked using copper-catalyzed azide-alkyne cycloaddition click reaction to afford dyad compound NI-SP. Chemosensor NI-SP exhibited selective ratiometric fluorescent response to the presence of Hg2+ in aqueous solution due to the interplay between resonance energy transfer (RET) and intramolecular charge transfer (ICT) processes occurred upon excitation. The observed switching of the ratio of emission intensities in the blue and red channels R was higher than in the case of monochromophoric styrylpyridine derivative SP showing ratiometric response based on ICT mechanism only. Biological studies revealed that NI-SP penetrates into human lung adenocarcinoma A549 cells and accumulates in cytoplasm and lysosomes. When cells were pre-incubated with mercury (II) perchlorate, the ratio R was increased 2.6 times, which enables detection of intracellular Hg2+ ions and their quantitative analysis in the 0.7-6.0 μM concentration range.

Mercury (Hg2+) Sensing Using Coumarin-Derived Fluorescent Chemo-Sensors: An Intuitive Development from 2015 to 2023

Mercury is known as a highly toxic metal that is poisonous even if present in a trace amount. Generally, it enters in the food chain (especially fish) and water resources via different pathways and leads to harmful effects. Owing to the detrimental nature of the metal, traditionally several methods were employed by researchers for regular monitoring of the mercury metal ions. However, these methods are associated with many limitations like high cost of technical expertise, and intricacy of the detection procedure. So, using these methods to detect mercury ions in real time is challenging. Therefore, in recent years fluorescent-based analytical tools emerged rapidly. Among the various fluorescent organic scaffolds, coumarin has been scorching, owing to quick response, light stability, high sensitivity, good selectivity, excellent fluorescence intensity, and fluorescence quantum yield. This review provides a deep dive into the coumarin-derived chemo-sensors development throughout 2015-2023. We anticipate that the review will assist to broad scientific community as a reference document to design more interesting sensors.

Aggregation-induced Emission Active Naphthalimide Derived Schiff Base for Detecting Cu2+ and Its Applications

Herein, an aggregation-induced emission (AIE) active Schiff base (NHS) was synthesized by condensing naphthalimide hydrazide with salicylaldehyde. The non-fluorescent solution of NHS in DMSO turned to emissive NHS upon increasing the HEPES fraction in DMSO from 70 to 95%. The UV-Vis absorption and DLS studies supported the self-aggregation of NHS that restricted the intramolecular rotation and activated the ESIPT process. The blue fluorescence of AIE luminogen NHS in DMSO:HEPES (5:95, v/v, pH = 7.4) was examined by adding different metal ions (Al3+, Ca2+, Cd2+, Co2+, Cu2+, Cr2+, Fe2+, Fe3+, Hg2+, Mg2+, Mn2+, Ni2+, Pb2+ and Zn2+). NHS showed a selective fluorescence switch-off response for Cu2+ due to the chelation enhancement quenching effect (CHEQ). The quenching of NHS by Cu2+ was explored by using density functional theory (DFT) and Stern-Volmer plot. The practical utility of NHS was examined by quantitative and qualitative analysis of Cu2+ in real water samples.

Naphthalimide-Dyes Bearing Phosphine and Phosphorylamide Moieties: Synthesis and Optical Properties

1,8-Naphthalimides (NIs) represent a class of organic dyes with interesting optical properties that has been extensively explored in the last decades in lighting devices, chemosensors, optical probes or medicinal chemistry. However, despite their remarkable potential, reports on organometallic dyes bearing NIs are scarce and virtually inexistent regarding palladium(II) complexes. Herein, we report the synthesis of NIs bearing phosphine and amine chelating moieties and the characterization of their optical properties both as single molecules and when complexed on Pd(II) ions. It is shown that the introduction of phosphine moieties in the naphthalimide core results in a marked increase in non-radiative processes, leading to a significant reduction of the emission efficiency and lifetime of these dyes, compared to amine-bearing counterparts. The complexation to Pd(II) sequesters the electronic contribution of chelating moieties, with complexes assuming an optical behavior similar to that of unsubstituted 1,8-naphthalimide. The complexation significantly increases the acidity of chelating secondary amines, giving rise to an unexpected intramolecular reaction that results in the formation of a novel 1,8-naphthalimide dye bearing a cyclic phosphorylamide moiety. The new dye exhibits good emission quantum yield, long fluorescence lifetime and sensitivity to basic media, evidencing potential for application in optical imaging and sensing scenarios.

Solvatochromism and solution π-stacking of N-(4-pyridyl)-1,8-naphthalimide and its corresponding triruthenium coordination complex

Due to the scarcity of spectroscopic studies on metal-coordinated naphthalimides, and aiming to investigate fundamental spectroscopic aspects, we have described here the aggregates of N-(4-pyridyl)-1,8-naphthalimide (NI-py) in solution as well as solvatochromism displayed by it and by the coordination compounds [Ru₃O(CH₃COO)₆(NI-py)₃]ⁿ, n = +1 or 0. Based both on theoretical calculations and luminescence spectra, we demonstrated that in aqueous media, the NI-py π-stacking is thermodynamically favored, suggesting a preferable conformation where the pyridine and naphthalene moieties of two NI-py molecules are parallel to each other, but are not co-planar within an individual molecule, due to steric hindrance. The NI-py ππ* band displayed positive solvatochromism, to which the major contribution was the Catalan's SP parameter (solvent polarizability). This observation is fully consistent with the extended π-electron cloud of the NI-py naphthalene ring. However, a secondary contribution of the SA (solvent acidity) was also observed, owing to the electron pairs available at the N-heteroatom of the pyridine rings and at the carbonyl-group oxygen atoms. Finally, the multiparametric solvent effect analysis indicated that the electronic coupling between coordinated NI-py and the metallic core is modulated by the charge of the [Ru₃O(CH₃COO)₆] core, being higher for the reduced species [Ru₃O(CH₃COO)₆(NI-py)]⁰. In addition, in this reduced species, there is no overlap between NI-py ππ* and the [Ru₃O(CH₃COO)₆] charge transfer (CT) transitions, leading to the observation of the dependence of the CT energy with the SdP parameter (solvent dipolarity) since the CT transition implies in a charge-separation state.

Naphthalimide-Piperazine Derivatives as Multifunctional "On" and "Off" Fluorescent Switches for pH, Hg2+ and Cu2+ Ions

Novel 1,8-naphthalimide-based fluorescent probes NI-1 and NI-2 were designed and screened for use as chemosensors for detection of heavy metal ions. Two moieties, methylpyridine (NI-1) and hydroxyphenyl (NI-2), were attached via piperazine at the C-4 position of the napthalimide core resulting in a notable effect on their spectroscopic properties. NI-1 and NI-2 are pH sensitive and show an increase in fluorescence intensity at around 525 nm (switch "on") in the acidic environment, with pK_a values at 4.98 and 2.91, respectively. Amongst heavy metal ions only Cu²⁺ and Hg²⁺ had a significant effect on the spectroscopic properties. The fluorescence of NI-1 is quenched in the presence of either Cu²⁺ or Hg²⁺ which is attributed to the formation of 1:1 metal-ligand complexes with binding constants of 3.6 × 10⁵ and 3.9 × 10⁴, respectively. The NI-1 chemosensor can be used for the quantification of Cu²⁺ ions in sub-micromolar quantities, with a linear range from 250 nM to 4.0 μM and a detection limit of 1.5 × 10^-8 M. The linear range for the determination of Hg²⁺ is from 2 μM to 10 μM, with a detection limit of 8.8 × 10^-8 M. Conversely, NI-2 behaves like a typical photoinduced electron transfer (PET) sensor for Hg²⁺ ions. Here, the formation of a complex with Hg²⁺ (binding constant 8.3 × 10³) turns the green fluorescence of NI-2 into the "on" state. NI-2 showed remarkable selectivity towards Hg²⁺ ions, allowing for determination of Hg²⁺ concentration over a linear range of 1.3 μM to 25 μM and a limit of detection of 4.1 × 10^-7 M.

A New Glutathione-Cleavable Theranostic for Photodynamic Therapy Based on Bacteriochlorin e and Styrylnaphthalimide Derivatives

Herein, we report a new conjugate BChl-S-S-NI based on the second-generation photosensitizer bacteriochlorin e6 (BChl) and a 4-styrylnaphthalimide fluorophore (NI), which is cleaved into individual functional fragments in the intracellular medium. The chromophores in the conjugate were cross-linked by click chemistry via a bis(azidoethyl)disulfide bridge which is reductively cleaved by the intracellular enzyme glutathione (GSH). A photophysical investigation of the conjugate in solution by using optical spectroscopy revealed that the energy transfer process is realized with high efficiency in the conjugated system, leading to the quenching of the emission of the fluorophore fragment. It was shown that the conjugate is cleaved by GSH in solution, which eliminates the possibility of energy transfer and restores the fluorescence of 4-styrylnaphthalimide. The photoinduced activity of the conjugate and its imaging properties were investigated on the mouse soft tissue sarcoma cell line S37. Phototoxicity studies in vitro show that the BChl-S-S-NI conjugate has insignificant dark cytotoxicity in the concentration range from 15 to 20,000 nM. At the same time, upon photoexcitation, it exhibits high photoinduced activity.

Fluorescent RET-Based Chemosensor Bearing 1,8-Naphthalimide and Styrylpyridine Chromophores for Ratiometric Detection of Hg2+ and Its Bio-Application

Dyad compound NI-SP bearing 1,8-naphthalimide (NI) and styrylpyridine (SP) photoactive units, in which the N-phenylazadithia-15-crown-5 ether receptor is linked with the energy donor naphthalimide chromophore, has been evaluated as a ratiometric fluorescent chemosensor for mercury (II) ions in living cells. In an aqueous solution, NI-SP selectively responds to the presence of Hg²⁺ via the enhancement in the emission intensity of NI due to the inhibition of the photoinduced electron transfer from the receptor to the NI fragment. At the same time, the long wavelength fluorescence band of SP, arising as a result of resonance energy transfer from the excited NI unit, appears to be virtually unchanged upon Hg²⁺ binding. This allows self-calibration of the optical response. The observed spectral behavior is consistent with the formation of the (NI-SP)·Hg²⁺ complex (dissociation constant 0.13 ± 0.04 µM). Bio-imaging studies showed that the ratio of fluorescence intensity in the 440–510 nm spectral region to that in the 590–650 nm region increases from 1.1 to 2.8 when cells are exposed to an increasing concentration of mercury (II) ions, thus enabling the detection of intracellular Hg²⁺ ions and their quantitative analysis in the 0.04–1.65 μM concentration range.

A Highly Water-Soluble and Solid State Emissive 1,8-Naphthalimide as a Fluorescent PET Probe for Determination of pHs, Acid/Base Vapors, and Water Content in Organic Solvents

A new highly water-soluble 1,8-naphthalimide fluorophore designed on the “fluorophore-spacer-receptor1-receptor2” model has been synthesized. Due to the unusually high solubility in water, the novel compound proved to be a selective PET-based probe for the determination of pHs in aqueous solutions and rapid detection of water content in organic solvents. Based on the pH dependence of the probe and its high water solubility, the INH logic gate was achieved using NaOH and water as chemical inputs, where NaOH is the disabler and the water is an enabler. In addition, the probe showed effective fluorescence “off-on” reversibility on glass support after exposure to acid and base vapors, which defines it as a promising platform for rapid detection of acid/base vapors in the solid-state, thus extending the molecular sensing concept from solution to the solid support.

Synthesis, Photophysical Characterization, and Sensor Activity of New 1,8-Naphthalimide Derivatives

Three new 1,8-naphthalimide derivatives M1-M3 with different substituents at the C-4 position have been synthesized and characterized. Their photophysical properties have been investigated in organic solvents of different polarity, and their fluorescence intensity was found to depend strongly on both the polarity of the solvents and the type of substituent at C-4. For compounds M1 and M2 having a tertiary amino group linked via an ethylene bridge to the chromophore system, high quantum yield was observed only in non-polar media, whereas for compound M3, the quantum efficiency did not depend on the medium polarity. The effect of different metal ions (Ag⁺, Ba²⁺, Cu²⁺, Co²⁺, Mg²⁺, Pb²⁺, Sr²⁺, Fe³⁺, and Sn²⁺) on the fluorescence emission of compounds M1 and M2 was investigated. A significant enhancement has been observed in the presence of Ag⁺, Pb²⁺, Sn²⁺, Co²⁺, Fe³⁺, as this effect is expressed more preferably in the case of M2. Both compounds have shown significant pH dependence, as the fluorescence intensity was low in alkaline medium and has been enhanced more than 20-fold in acidic medium. The metal ions and pH do not affect the fluorescence intensity of M3. Density-functional theory (DFT) and Time-dependent density-functional theory (TDDFT) quantum chemical calculations are employed in deciphering the intimate mechanism of sensor mechanism. The functional properties of M1 and M2 were compared with polyamidoamine (PAMAM) dendrimers of different generations modified with 1,8-naphthalimide.

Fluorescent, colourimetric, and ratiometric probes based on diverse fluorophore motifs for mercuric(II) ion (Hg2+) sensing: highlights from 2011 to 2019

Though it has not been shown to deliver any biological importance, mercuric(II) ion (Hg²⁺) is a deleterious cation which poses grievous effects to the human body and/or the ecosystem, hence, the need for its sensitive and selective monitoring in both environmental and biological systems. Over the years, there has been a great deal of work in the use of fluorescent, colourimetric, and/or ratiometric probes for Hg²⁺ recognition. Essentially, the purpose of this review article is to give an overview of the advances made in the constructions of such probes based on the works reported in the period from 2011 to 2019. Discussion in this review work has been tailored to the kinds of fluorophore scaffolds used for the constructions of the probes reported. Selected examples of probes under each fluorophore subcategory were discussed with mentions of the typically determined parameters in an analytical sensing operation, including modulation in fluorescence intensity, optimal pH, detection limit, and association constant. The environmental and biological application ends of the probes were also touched where necessary. Important generalisations and conclusions were given at the end of the review. This review article highlights 196 references.

Microwave-Assisted Synthesis and Fluorescent Properties of 4-Phenyl-1,8-naphthalimide

4-Phenyl-1,8-naphthalimide was synthesized by imidation of commercially available 4-bromo-1,8-naphthalic anhydride, followed by Suzuki coupling with phenyl boronic acid, both under microwave heating. The microwave-assisted reactions were found to be faster and more efficient than reactions carried out by heating in oil-baths. While this compound was quite fluorescent in solvents such as chloroform, methanol and ethanol, it is virtually non-fluorescent in DMSO; however, upon the addition of water to DMSO solutions of this dye, fluorescence was restored, suggesting a tendency for aggregation-induced emission. The fluorescent properties of 4-phenyl-1,8-naphthalimide were found to be influenced by salt concentrations, likely as a result of hydrophobic effects. While this dye does not show binding to DNA, presence of bovine serum albumin leads to effective fluorescence quenching.

A lysosome-targetable fluorescent probe for imaging trivalent cations Fe3+, Al3+ and Cr3+ in living cells

An effective morpholine-type naphthalimide chemsensor, N-p-chlorophenyl-4-(2-aminoethyl)morpholine-1,8-naphthalimide (CMN) has been developed as a lysosome-targeted fluorometric sensor for trivalent metal ions (Fe³⁺, Al³⁺ and Cr³⁺). Upon the addition of Fe³⁺, Al³⁺ or Cr³⁺ ions, the probe CMN showed an evident naked-eye color changes which pale yellow solution of CMN turned deepened and it displayed turn-on fluorescence response in methanol. CMN showed a significant selective and sensitive toward Fe³⁺, Al³⁺ or Cr³⁺ ions, while there was no obvious behavior to other monovalent or divalent metal ions from the UV-vis and fluorescence spectrum. Based on the Job's plot analyses the 1:1 coordination mode of CMN with Fe³⁺, Al³⁺ or Cr³⁺ was proposed. The limit of detection (LOD) observed were 0.65, 0.69 and 0.68 μM for Fe³⁺, Al³⁺ and Cr³⁺ ions, respectively. The N-atom of morpholine directly involved in complex formation, CMN emitted fluorescence through inhibition of photoinduced electron transfer (PET). This probe exhibited excellent imaging ability for Fe³⁺, Al³⁺and Cr³⁺ ions in living cells with low cytotoxicity. Significantly, the cellular confocal microscopic research indicated that the lysosome-targeted group of morpholine moiety was introduced which realized the capability of imaging lysosomal trivalent metal ions in living cells for the first time.

1,8-Naphthalimide-Based Multifunctional Compounds as Cu2+ Probes, Lysosome Staining Agents, and Non-viral Vectors

A series of multifunctional compounds (MFCs) 1a-1d based on 1,8-naphthalimide moiety were designed and synthesized. Due to the good fluorescence property and nucleic acid binding ability of 1,8-naphthalimide, these MFCs were applied in Cu2+ ion recognition, lysosome staining as well as RNA delivery. It was found that these MFCs exhibited highly selective fluorescence turn-off for Cu2+ in aqueous solution. The fluorescence emission of 1a-1d was quenched by a factor of 116-, 20-, 12-, and 14-fold in the presence of Cu2+ ions, respectively. Most importantly, 1a-Cu and 1b-Cu could be used as imaging reagents for detection of lysosome in live human cervical cancer cells (HeLa) using fluorescence microscopy. Furthermore, in order to evaluate the RNA delivery ability of 1a-1d, cellular uptake experiments were performed in HeLa, HepG2, U2Os, and MC3T3-E1 cell lines. The results showed that all the materials could deliver Cy5-labled RNA into the targeted cells. Among them, compound 1d modified with long hydrophobic chain exhibited the best RNA delivery efficiency in the four tested cell lines, and the performance was far better than lipofectamine 2000 and 25 kDa PEI, indicating the potential application in non-viral vectors.