Photocatalytic oxidative desulfurization of dibenzothiophene catalyzed by amorphous TiO2 in ionic liquid

Nanoarchitectonics of Copper Tungsten-Mesoporous Silica with a New Template for Photo Oxidative-Desulfurization of Dibenzothiophene

A novel CuWO4/SiO2 heterojunction catalyst was successfully synthesized using a new sulfonamide derivative. The physical characteristics of the prepared samples were investigated by TGA, XRD, FTIR, SEM, UV, PL, and XPS. The prepared catalysts were applied as a nano photocatalyst for photooxidative desulfurization of dibenzothiophene under visible light using hydrogen peroxide as an oxidant. The photocatalytic oxidative desulfurization performances of the prepared samples were investigated. Various factors as the reaction time, dibenzothiophene concentration, catalyst dose, and the oxidizing agent dose were also studied. The prepared photocatalyst has high desulfurization activity in the removal of DBT under mild conditions. Results showed that the CuWO4/SiO2 exhibited considerably higher activity than neat support SiO2. Such improved photocatalytic activity is mainly attributed to the efficient separation of photogenerated electron–hole pairs on CuWO4/SiO2 heterojunction. Moreover, the synergistic effects of this photocatalytic oxidation and the green oxidant hydrogen peroxide played an essential role in desulfurization. The reaction is pseudo-first-order and can reach 98.6% removal of dibenzothiophene after 70 min and 97.2% after four cycles.

Graphical Abstract

Sono-oxidative desulfurization of fuels using heterogeneous and homogeneous catalysts: A comprehensive review

Recently, environmental pollution has increased significantly due to petroleum-based fuels widely used in vehicles. This environmental pollution is mainly due to the acidic SO2 gas generated by the combustion of fuels and emitted into the atmosphere. SO2 gas causes not only acid rain but also corrosion of metal parts of engines in vehicles. In addition, it functions as a catalyst poison in catalytic converters in exhaust system. Due to these damages, strict regulations have been introduced to reduce the amount of sulfur in fuels. As of 2005, the permissible amount of sulfur in diesel fuels in Europe and America has been limited to 10 and 15 ppm by weight, respectively. Due to the decreasing oil reserves in the world, high viscosity petroleums containing high sulfur and heavier fractions (i.e., low-quality oils) are increasing, thus making desulfurization difficult and leading to high costly process. Since time and economic loss are very important today, these two terms have to be reduced to a minimum. Recently, ultrasound wave in ODS shown as an alternative to HDS is utilized to further increase desulfurization in shorter times. Ultrasound wave locally creates high temperatures and high pressures (hot-spot theory) in liquid, causing the desulfurization reaction to accelerate further. In this review, the advantages and difficulties of oxidative desulfurization, the economics of ultrasound-assisted oxidative desulfurization are summarized and recommendations for improving the process are presented.

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

Triphenyl methyl phosphonium tosylate as an efficient phase transfer catalyst for ultrasound-assisted oxidative desulfurization of liquid fuel

The novel phosphonium-based ionic liquid (IL), triphenyl methyl phosphonium tosylate ([TPMP][Tos]), has been synthesized and applied as a phase transfer catalyst (PTC) in the ultrasound-assisted oxidative desulfurization (UAODS). Oxidation of model fuel (MF) containing dibenzothiophene (DBT) was carried out using an equimolar mixture of H₂O₂-CH₃COOH as an oxidant at 40-70 °C in the presence of IL. The sulfur compound is converted into polar sulfone, and the maximum desulfurization efficiency was examined. The effect of process parameters such as reaction temperature, reaction time, molar ratio of oxidant to sulfur (n(O/S)), and the mass ratio of ionic liquid to model fuel (m(IL/MF)) was studied, and the conditions for maximizing the DBT conversion rate were found. Maximum conversion (> 99%) was obtained at a temperature of 70 °C with m(IL/MF) of 0.8. The oxidation reactivity of various sulfur compounds was studied at different time intervals. To verify the effect of ionic liquid and ultrasound irradiation, extractive desulfurization (EDS), oxidative desulfurization (ODS), and UAODS in the presence of IL were carried out. The experimental results show that the UAODS process gives the highest desulfurization efficiency. A kinetic study was performed to estimate the rate constant and the order of oxidation reaction.

Improved direct synthesis of TiO2 catalyst using sonication and its application for the desulfurization of thiophene

TiO₂ catalyst was synthesized in the presence of ultrasound (ultrasonic horn at 20 kHz frequency and 70% duty cycle) at different power (80 W to 120 W) and durations as well as surfactant concentration with an objective of establishing best conditions for achieving lowest particle size of the photocatalyst. Detailed characterization in terms of crystal phase, crystallinity, functional groups and morphology of the photocatalyst has been performed using SEM, XRD and FTIR analysis. It was demonstrated that sonication significantly reduced the particle size with high degree of sphericity and homogeneity as compared to conventionally synthesized TiO₂ with similar crystallinity in both cases. The catalytic performance was subsequently evaluated for the deep desulfurization of thiophene. Different desulfurization approaches including individual US (ultrasonic horn at 20 kHz frequency, 110 W power and 70% duty cycle) and UV irradiations, US/UV, US/UV/H₂O₂, US/UV/TiO₂ and US/UV/H₂O₂/TiO₂ were applied to evaluate the catalytic activity. The best approach was demonstrated as US/UV/H₂O₂/TiO₂ and also activity of catalyst synthesized using ultrasound was much better compared to conventionally synthesized catalyst. The studies related to different model solvents demonstrated lowest reactivity for toluene whereas n-hexane and n-octane resulted in complete desulfurization in 60 min and 50 min treatment respectively. The desulfurization followed pseudo first order reaction kinetics irrespective of the solvent used. Overall the work clearly demonstrated the efficacy of ultrasound in improving the catalyst synthesis as well as desulfurization of thiophene.

Desulfurization through Photocatalytic Oxidation: A Critical Review

Fuel oil, the most important strategic resource, has been widely used in industrial applications. However, the sulfur-containing compounds in fuel oil also present humanity with huge environmental issues and health concerns due to the hazardous combustion waste. To address this problem, the low vulcanization of fuel production technology has been intensively explored. Compared with traditional hydrodesulfurization technology, the newly emerged photocatalytic desulfurization has the advantages of milder operating conditions, lower energy consumption, and higher efficiency, holding great prospect to achieve deep desulfurization. Though great efforts have been made, the desulfurization catalysts still suffer from inferior light absorption, fast recombination of photocarriers, and poor structure modification. This Review summarizes recent development of photocatalytic desulfurization, including the desulfurization principle, current desulfurization challenges, and corresponding solutions. Particularly, the roles of defect engineering, hybrid coupling, and structure modifications in the enhancement of photocatalytic performance are emphasized. In addition, the photocatalytic desulfurization mechanism is also introduced with the ^. OH and ^. O₂ ^- radicals as main active species. Finally, some perspectives on the photocatalytic desulfurization are provided, which can further optimize the desulfurization efficiency and guide future photocatalyst design.

A new simple protocol for the synthesis of nanohybrid catalyst for oxidative desulfurization of dibenzothiophene

This study offers an investigation of the catalytic activity of TiO₂/SiO₂ during oxidative desulfurization (ODS) of a model fuel that includes dibenzothiophene (DBT), using hydrogen peroxide (H₂O₂) as a green oxidant in the absence of UV irradiation. For the first time, though a novel and simple protocol, TiO₂/SiO₂ nanohybrid was synthesized using ascorbic acid and glycerol as green complexing and polymerizing agents, respectively. The TiO₂/SiO₂ catalyst was thoroughly characterized by XRD, FT-IR, nitrogen adsorption-desorption measurements, TEM, FESEM, and TGA. Results revealed a high catalytic oxidative activity for the catalyst in the removal of DBT regarding sulfur removal up to 99.4% within 20 min under optimum reaction conditions. The main factors affecting the ODS process, including catalyst dosage, temperature, O/S molar ratio, and different oxidizing agents, were evaluated to identify optimum conditions. The desulfurization efficiency of the recoverable catalysts showed no loss in activity after four times. The present article suggests a new and green method for the synthesis and characterization of an efficient catalyst (TiO₂/SiO₂) in deep oxidative desulfurization at 25 °C and removal of refractory organosulfur compounds that yield ultra-low sulfur fuels. Also, it proved to have a much higher catalytic oxidation capacity when compared to pure TiO₂.

Nanoscaled Amorphous TiO2 Hollow Spheres: TiCl4 Liquid Droplet-Based Hydrolysis Fabrication and Strong Hollow Structure-Enhanced Surface-Enhanced Raman Scattering Effects

A very simple route is developed for fast fabrication of nanosized amorphous titanium dioxide (TiO₂) hollow spheres (THPs) just via dropping the pure four titanium chloride (TiCl₄) liquid droplets into deionized water at around room temperature. The THPs, at around 80 nm in mean diameter, can be formed within a few seconds after dropping TiCl₄ droplets into water. The shell layers of the obtained THPs are amorphous and porous in structure with a porosity of 58-80% and show a linear increase in thickness with the size of THPs. Further experiments have revealed that the reaction temperature, initial pH value, and size of the TiCl₄ droplet are crucial to the formation, size, productivity, and microstructure of the THPs. A model is proposed on the basis of the fragmentation of liquid droplets, hydrolysis-induced formation, and inward growth of TiO₂ shell layers, which can well describe the formation of the THPs. Importantly, such amorphous nanoscaled THPs have exhibited some strong hollow structure-enhanced performances. Typically, the THP-built film shows the highest reflectivity in the visible region compared to the other structured TiO₂ films. Especially, if it supports the film of the Au nanoparticle, the surface-enhanced Raman scattering effect is significantly enhanced by more than 1 order of magnitude. This work provides not only a simple and quick fabrication method for the THPs but also a new member for their family.

A novel Nb2O5/Bi2WO6 heterojunction photocatalytic oxidative desulfurization catalyst with high visible light-induced photocatalytic activity

A novel Nb₂O₅/Bi₂WO₆ heterojunction catalyst was synthesized and applied in PODS of DBT. It shows higher activity than pure Nb₂O₅ and Bi₂WO₆ in visible light induced PODS of DBT, in which holes and superoxide radicals are the main reactive species.

In situ synthesis of amorphous titanium dioxide supported RuO2 as a carbon-free cathode for non-aqueous Li–O2 batteries

Amorphous TiO₂ supported crystalline RuO₂ (a-TiO₂/c-RuO₂ hybrid) enhanced battery performance, and this enhancement was attributed to the crystallinity of the TiO₂ that amorphous TiO₂ is more electrochemically active toward ORR/OER than crystalline TiO₂.

Oxidative Desulfurization of Fuels Using Ionic Liquids: A Review

Extractive oxidation, wherein aromatic sulfur compounds are extracted and subsequently oxidized to their corresponding sulfones, has proven to be one of the most effective desulfurization methods for producing ultra-low sulfur content fuels. As non-volatile and highly designable solvents, ionic liquids (ILs) have attracted considerable attention for the oxidative desulfurization of fuels. In this review, we systematically discuss the utility of ILs in catalytic extractive oxidation, including their roles as extractants, catalysts, or dual extracting/catalytic species for this application. We also discuss the challenges facing the use of ILs in this regard, including their relatively high costs and excessive viscosities, as well as the efficiencies and stabilities of catalysts presently being considered within them.

Light irradiation induced aerobic oxidative deep-desulfurization of fuel in ionic liquid

One-pot extraction combined with metal-free photochemical aerobic oxidative deep desulfurization of fuels in ionic liquid was successfully achieved.

Deep oxidative desulfurization of model oil catalyzed by magnetic MoO3/Fe3O4

The magnetic MoO₃/Fe₃O₄ catalyst showed good catalytic performance and stability for oxidation desulfurization of dibenzothiophene, and it could be easily separated by applying an external magnetic field.