Hypersensitivity Pneumonitis Due to Metalworking Fluid Aerosols

Differential Immunogenicity and Lung Disease-Inducing Potential of Mycobacterium immunogenum Genotypes and Impact of Co-Exposure with Pseudomonas: Optimizing a Mouse Model of Chronic Hypersensitivity Pneumonitis

Mycobacterium immunogenum (MI) colonizing metalworking fluids (MWFs) has been associated with chronic hypersensitivity pneumonitis (HP) in machinists. However, it is etiologically unclear why only certain mycobacteria-contaminated fluids induce this interstitial lung disease. We hypothesized that this may be due to differential immunogenicity and the HP-inducing potential of MI strains/genotypes as well as the confounding effect of co-inhaled endotoxin-producers. To test this hypothesis, we optimized a chronic HP mouse model in terms of MI antigen dose, timepoint of sacrifice, and form of antigen (cell lysates vs. live cells) and compared six different field-isolated MI strains. Overall, MJY10 was identified as the most immunogenic and MJY4 (or MJY13) as the least immunogenic genotype based on lung pathoimmunological changes as well as Th1 cellular response (IFN-γ release). Infection with MI live cells induced a more severe phenotype than MI cell lysate. Co-exposure with Pseudomonas fluorescens caused a greater degree of lung innate immune response and granuloma formation but a diminished adaptive (Th1) immune response (IFN-γ) in the lung and spleen. In summary, this study led to the first demonstration of differential immunogenicity and the disease-inducing potential of field strains of MI and an interfering effect of the co-contaminating Pseudomonas. The improved chronic MI-HP mouse model and the identified polar pair of MI strains will facilitate future diagnostic and therapeutic research on this poorly understood environmental lung disease.

Hypersensitivity pneumonitis due to metal working fluids: detection of specific IgG antibodies to microbial antigens

Occupational exposure to microbially contaminated metal working fluids (MWF) can cause hypersensitivity pneumonitis (HP). An important step in the diagnosis of HP is to identify the triggering antigen by detection of corresponding specific IgG antibodies (sIgG). As commercial sIgG tests are currently not available, protein antigens were prepared from MWF-workplace samples and from MWF-typical bacterial isolates. In 57% of suspected HP-cases (n= 30) elevated sIgG concentrations were measured to at least one MWF-relevant antigen, of which Mycobacterium immunogenum was most prominent (88%), followed by Pseudomonas oleovorans and Pseudomonas spec (82% each), MWF-antigen mix and Pseudomonas alcaliphila (65% each). Elevated sIgG concentrations to other microorganisms were measured to Micropolyspora faeni (82%) and Aureobasidium pullulans (77%). Correlation of sIgG values of all tested microbial antigens showed a significant relationship of MWF-antigen mixture to Pseudomonas antigens, but a low correlation to moulds. These newly prepared MWF-antigens are useful tools for the diagnosis of patients with suspected MWF-HP and are available for further investigations.

Machine operator's lung outbreak due to Eikenella corrodens

BACKGROUND

Outbreaks of hypersensitivity pneumonitis (HP) are not uncommon in workplaces where metalworking fluids (MWFs) are used. The recirculation of MWFs leads to microbiological contamination, which is responsible for outbreaks. Most outbreak reports come from USA and the UK; however, no similar reports have been published from Central Europe.

AIMS

To describe an outbreak of MWF-associated HP in workers from a compressor assembly manufacturing facility in Slovak Republic and to identify the potential antigens responsible for the outbreak.

METHODS

We investigated the history of worker's symptoms, physical examinations, lung function tests, radiographic scans and lung biopsies. The MWF samples were analysed for different strains of bacteria and fungi. Antigen extracts were produced from the microorganisms isolated from MWFs, and positive precipitin reactions were evaluated.

RESULTS

MWF-associated HP was diagnosed in 21 men and 6 women. All workers had work-related dyspnoea and cough with abnormal pulmonary diffusing capacity. Twenty-four cases had evidence of interstitial lung disease. Four cases were classified as having fibrotic HP. Nineteen microbial isolates (12 bacteria and 7 fungi) were cultured from the MWFs. Twenty-five cases had a positive response to at least one isolate. Eikenella corrodens and Bacillus subtilis were the most frequently reacting antigens (in 15 and 12 workers, respectively).

CONCLUSIONS

Despite decreasing reports of MWF-associated HP outbreaks over the past several decades, we describe one of the largest outbreaks in Europe. While the bacterium E. corrodens was found in the MWF samples, its relationship to the disease should be further investigated.

Release of Interleukin-1β evaluation among mineral oil mist–exposed workers

Exposure to aerosols has been found to be linked to respiratory impairment. Although the effects of both indoor and outdoor exposures to particulates have been extensively reported, exposures to mists are less studied. Herein, we reported a survey of mineral oil mist toxicity in an occupational exposure scenario. For the purpose of this study, 65 lathe workers of the metal processing industry, as mineral oil mist–exposed population, were studied. Thereafter, the participants’ age, smoking habits and work experience were matched with those of the control workers ( n = 65) who were not occupationally exposed to mist. Thereafter, air samples were evaluated from the breathing zone of the workers using NIOSH method 5026. Plasma Interleukin-1β as a pro-inflammatory indicator was assessed in all the studied subjects. Mean ± standard deviation of mineral oil mist time-weighted average exposure in lathe workers was 7.10± 3.49 mg/m3. IL-1β cytokine levels were significantly higher in the lathe groups compared to the control group. The mean level of Interleukin-1β in the control subjects (2922 pg/L) was selected as the cut-off point of the inflammation effect. Based on this pro-inflammatory point, the results of monitoring showed that 60% of the exposed were affected. A Spearman correlation was also found between mineral oil mist exposure and inflammation in the affected subjects. Our findings highlighted the immunological potential of mineral oil mist in occupational exposure. Overall, the results of this study suggested that Interleukin-1β evaluation in mineral oil mist exposure could be considered as both an acute and chronic inflammation marker.

Occupational hypersensitivity pneumonitis caused by fossil-containing rocks

AIMS

We present a hypersensitivity immune response to inhalation of antigens from fossil soils frequently used in tile manufacture. We found that the soil polished by a worker affected by pneumonitis was a paleosol containing bivalves from the cretaceous period called Hippurites.

METHODS

We made a diagnostic study for pneumonitis (analysis, microbiology, radiology, high-resolution CT, bronchoalveolar lavage, pulmonary biopsy. A biochemical study of the polishing materials used (magnesium hexafluorosilicate crystallizer), steel spoilage, washing liquid and Bilbao red limestone) after scraping of the same. Allergy study included skin tests with extracts from fossil soils, determination of IgG and IgE to mollusks, IgE-immunodetection with soil extracts with the patient's serum and non-atopic controls. Histology was made using scanning electron microscopy of the lung biopsy and the fossil soil to determine the presence of remains of mollusks, fungi, pollen or other fossil elements.

RESULTS

SDS-PAGE IgE Immunoblotting assay detecting IgE binding in soil extract between 66 and 35 kDa. Likewise, IgE-Immunblotting assay with extracts from bivalve mollusks (razor shell, mussel and scallop) and gastropod (sea snail), detecting IgE binding between 100 kDa - 30 kDa, as well as in some bands with molecular mass between 20 and 14 kDa, proving sensitization to mollusks.

CONCLUSIONS

Bivalve proteins preserved in fossil soils may produce an immune hypersensitivity response. This may impact on the precautions exposed workers, in this case fossil soil cutters and polishers, should take.

A cluster of hypersensitivity pneumonitis associated with exposure to metalworking fluids

BACKGROUND

Workers exposed to metalworking fluids (MWF) can develop respiratory illnesses including hypersensitivity pneumonitis (HP). These respiratory manifestations are likely due to microbial contamination of aerosolized MWF. This paper reports a cluster of HP and respiratory symptoms at a manufacturing plant where MWF and workplace air were contaminated with bacterial endotoxin despite frequent negative bacterial cultures of MWF.

METHODS

A pulmonologist assessed and treated three workers with respiratory symptoms. The Occupational Safety and Health Administration (OSHA) inspected the plant. OSHA's investigation included bacterial culture of MWF, measurement of endotoxin concentrations in MWF and workplace air, review of the employer's fluid management program, and distribution of a cross-sectional symptom questionnaire.

RESULTS

Three workers had biopsy-confirmed HP. In addition, 30.8% of questionnaire respondents reported work-related respiratory symptoms. OSHA detected endotoxin levels as high as 92,000 endotoxin units (EU)/ml in MWF and 3200 EU/m³ in air. Endotoxin concentrations and risk of MWF inhalation were highest near an unenclosed multistation computer numerical control machine. A contractor had tested this machine's MWF for bacterial growth weekly during the preceding three years, and most (96.0%) of those tests were negative.

CONCLUSIONS

Contaminated MWF can cause severe occupational lung disease even if microorganisms do not grow in fluid cultures. Endotoxin testing can increase the sensitivity of detection of microbial contamination. However, employers should not rely solely upon MWF testing data to protect workers. Medical surveillance and meticulous source control, such as engineering controls to suppress MWF mist and prevent its inhalation, can reduce the likelihood of respiratory disease.

Occupational Exposure to Metalworking Fluid and the Effect on Health Symptoms-An Intervention Study

Exposure to metalworking fluid has been shown to cause health problems among workers. The aim of this study was to compare health outcomes and levels of exposure among workers exposed to metalworking fluid before and after the implementation of preventive measures. The frequencies of self-reported symptoms, as well as the concentrations of measured substances were lower after the implementation of preventive measures. Logistic regression showed statistically significant differences in the report of irritations, a stuffy or runny nose, eye irritation, a hoarse or dry throat, and a cough with odds ratios of 0.31 (95% confidence interval [CI] 0.21 to 0.47), 0.12 (95% CI 0.05 to 0.29), 0.13 (95% CI 0.06 to 0.28), and 0.24 (95% CI 0.12 to 0.46), respectively. This confirms the efficiency of the performed intervention and highlights the importance of eliminating the recirculation of contaminated air.

Occupational respiratory and skin diseases among workers exposed to metalworking fluids

PURPOSE OF REVIEW

To examine respiratory and skin diseases that occur among workers exposed to metalworking fluids (MWFs) used during machining processes.

RECENT FINDINGS

Five cases of a severe and previously unrecognized lung disease characterized by B-cell bronchiolitis and alveolar ductitis with emphysema (BADE) were identified among workers at a machining facility that used MWFs, although MWF exposure could not be confirmed as the etiology. In the United Kingdom, MWF is now the predominant cause of occupational hypersensitivity pneumonitis (HP). Under continuous conditions associated with respiratory disease outbreaks, over a working lifetime of 45 years, workers exposed to MWF at 0.1 mg/m3 are estimated to have a 45.3% risk of acquiring HP or occupational asthma under outbreak conditions and a 3.0% risk assuming outbreak conditions exist in 5% of MWF environments. In addition to respiratory outcomes, skin diseases such as allergic and irritant contact dermatitis persist as frequent causes of occupational disease following MWF exposure.

SUMMARY

Healthcare providers need to consider MWF exposure as a potential cause for work-related respiratory and skin diseases. Additional work is necessary to more definitively characterize any potential association between MWF exposures and BADE. Medical surveillance should be implemented for workers regularly exposed to MWF.

[Hot tub lung: A retrospective analysis of 14 cases]

INTRODUCTION

Hot tub lung (HTL) is a hypersensitivity pneumonitis (HP) related to inhalation of non-tuberculous mycobacteria (NTM) when exposed to ejected jet droplets from a jacuzzi. The aetiological debate is not completely settled in the literature.

METHOD

An observational study of 14 cases of HTL, diagnosed at the University Hospital of Besançon, France, between 2004 and 2018 according to the diagnostic criteria used in the clinic.

RESULTS

This cohort corresponds to type I HP (inflammatory), with one case of type II HP. Decrease of lung transfer for carbon monoxide was present in 86% of examinations (n=12/14). In total, 84% of bronchoalveolar lavages showed a lymphocytic cellular pattern≥30% (n=11/13). The environmental survey enabled the identification of NTM in 93% of cases (n=13/14), mainly Mycobacterium avium. Serum precipitins directed against NTM were found in 10% of the cases (n=2/20). Three cases received corticosteroid therapy and none received antibiotics. Antigenic eviction has improved the symptomatology in all cases.

CONCLUSIONS

Our cohort supports the hypothesis that HTL is predominantly a type I HP. Avoidance of the agent involved (NTM) is necessary. The diagnosis is difficult because serum precipitins against NTM are not easily demonstrable. An environmental survey could facilitate the identification of the NTM. Prevention of HTL depends on education of the clinician and the patient.

Occupational Exposure to Metals and Solvents: Allergy and Airway Diseases

PURPOSE OF REVIEW

Occupational allergic diseases (OAD) such as occupational contact dermatitis (OCD), occupational asthma (OA), and occupational rhinitis (OR) are the most prevalent occupational diseases in industrialized countries. The purpose of this review is to provide an update about the main occupational metal and solvent exposures related to allergy and airway diseases and to discuss newly defined causative agents and industries in this field.

RECENT FINDINGS

Currently for over 400 causative agents for OA and OCD, several hundreds of agents for OR have been identified. Although many studies have reported an overall decline in OAD related to known agents after implementation of efficient and effective workplace preventive measures, the constant development of new products continuously introduces to the market potential unknown respiratory hazards. Workplace allergens are often high molecular weight (HMW) agents that are > 10 kDa molecular weight and capable of eliciting IgE sensitization. Sensitizing low molecular weight (LMW) agents are often reactive chemicals. Metals and solvents are two large causative agent groups related to OADs that mainly behave as LMW (< 10 kDa) sensitizers and/or irritants. Avoidance of causative exposures through control strategies is the primary prevention approach for OADs. These strategies must be applied and covered for all known and newly defined causative agents. This review aims to summarize current status of known occupational metal and solvent exposures related to allergy and airway diseases and to discuss newly defined causative agents and industries in this field.

Diagnosis of occupational hypersensitivity pneumonitis

PURPOSE OF REVIEW

To discuss the diagnostic methods currently used in the study of patients with hypersensitivity pneumonitis, with special emphasis on the most recent contributions published in the medical literature regarding the diagnosis of occupational hypersensitivity pneumonitis (OHP). This review presents an update of the use of these diagnostic tests, a controversial issue among experts.

RECENT FINDINGS

In spite of the multiple attempts at systematization and the publication of expert consensus statements, standardizing and diagnostic methods and criteria remain particularly difficult. As a result, centers tend to rely on their own experience and establish diagnosis by consensus among their multidisciplinary teams. Though recommendable in many ways, this method presents significant limitations.

SUMMARY

Diagnosis of OHP should be made with a thorough clinical history of the symptoms and clinical signs as well as a meticulous review, if possible by an expert, of possible exposures in the working environment; a meticulous physical examination; high-resolution computed tomography of the thorax; serum determination of specific immunoglobuline Gs; bronchoalveolar lavage and possibly cryobiopsy; fungal culture; and, when appropriate, a specific inhalation challenge test with the suspected antigen.

Quorum sensing inhibition as a promising method to control biofilm growth in metalworking fluids

Microbial contamination in metalworking systems is a critical problem. This study determined the microbial communities in metalworking fluids (MWFs) from two machining shops and investigated the effect of quorum sensing inhibition (QSI) on biofilm growth. In both operations, biofilm-associated and planktonic microbial communities were dominated by Pseudomonadales (60.2-99.7%). Rapid recolonization was observed even after dumping spent MWFs and meticulous cleaning. Using Pseudomonas aeruginosa PAO1 as a model biofilm organism, patulin (40 µM) and furanone C-30 (75 µM) were identified as effective QSI agents. Both agents had a substantially higher efficacy compared to α-amylase (extracellular polymeric substance degrading enzyme) and reduced biofilm formation by 63% and 76%, respectively, in MWF when compared to untreated controls. Reduced production of putatively identified homoserine lactones and quinoline in MWF treated with QS inhibitors support the effect of QSI on biofilm formation. The results highlight the effectiveness of QSI as a potential strategy to eradicate biofilms in MWFs.

Methanosphaera stadtmanae induces a type IV hypersensitivity response in a mouse model of airway inflammation

Despite improved awareness of work‐related diseases and preventive measures, many workers are still at high risk of developing occupational hypersensitivity airway diseases. This stems from a lack of knowledge of bioaerosol composition and their potential effects on human health. Recently, archaea species were identified in bioaerosols, raising the possibility that they play a major role in exposure‐related pathology. Specifically, Methanosphaera stadtmanae (MSS) and Methanobrevibacter smithii (MBS) are found in high concentrations in agricultural environments and respiratory exposure to crude extract demonstrates immunomodulatory activity in mice. Nevertheless, our knowledge of the specific impact of methanogens exposure on airway immunity and their potential to induce airway hypersensitivity responses in workers remains scant. Analysis of the lung mucosal response to methanogen crude extracts in mice demonstrated that MSS and MBS predominantly induced T_H17 airway inflammation, typical of a type IV hypersensitivity response. Furthermore, the response to MSS was associated with antigen‐specific IgG₁ and IgG_2a production. However, despite the presence of eosinophils after MSS exposure, only a weak T_H2 response and no airway hyperresponsiveness were observed. Finally, using eosinophil and mast cell‐deficient mice, we confirmed that these cells are dispensable for the T_H17 response to MSS, although eosinophils likely contribute to the exacerbation of inflammatory processes induced by MSS crude extract exposure. We conclude that, as MSS induces a clear type IV hypersensitivity lung response, it has the potential to be harmful to workers frequently exposed to this methanogen, and that preventive measures should be taken to avoid chronic hypersensitivity disease development in workers.