Production of Pectin from Lemon Peel Powder Using Ohmic Heating-Assisted Extraction Process

Physicochemical characterization of pectin extracted from mandarin peels using novel electromagnetic heat

A novel electromagnetic heat extraction method was presented, whereby mandarin peels residue solution was located in a winding coil subjected to an oscillating magnetic field, and the pectin was extracted under appropriate conditions. Numerical relationships between applied magnetic field and induced electric field (IEF) in the extraction process were elaborated. The results showed that the induced current density, IEF and terminal temperature increased with increasing magnetic field. The maximum current density of 0.35 A/cm corresponds to the highest terminal temperature of 84.6 °C and IEF intensity of 26.6 V/cm. When magnetic field intensity was 1.39 T and the extraction time was 15 min, the maximum yield of pectin reached 9.16 %. In addition, all treatments impacted the ash content, protein content, water-holding capacity (WHC), and oil-holding capacity (OHC) of the obtained pectin. The pectin extracted by electromagnetic heat had the lowest DE value of 71.3 % with 126.55 kDa molecular weight, while the GalA content was at the highest level of 76.18 %. After different treatments, the composition of pectin monosaccharides changed, but there were slight differences in the composition of pectin polysaccharides. Moreover, the electromagnetic heat extracted pectin had light color and an obvious surface fragmentation of the peel residue.

Roles of physical fields in the extraction of pectin from plant food wastes and byproducts: A systematic review

Pectin is a naturally occurring hydrocolloid found in the cell wall and middle lamella of many plants and has numerous functional applications in food and other related industries. The type of extraction methods used in production has a strong influence on the structural or physicochemical properties of the resultant pectin and the potential application or market value of the produced pectin. Many conventional extraction methods are well-established and commercially well adopted. However, the increased demand for pectin due to limitations of the existing methods in terms of efficiency and influence on end product quality has been renewed in developing novel techniques or procedures that help to alleviate these problems. In this review paper, a series of strategies involving the application of physical fields, such as acoustic, electromagnetic, electric and mechanical one, are reviewed for potential opportunities to improve the yield and quality attributes of pectin extracted from plant food wastes and byproducts. The extraction mechanism, processing equipment, key operating parameters as well as advantages and disadvantages of each method are systematically reviewed, and findings and conclusions on the potential applications of each method are described. Moreover, the challenges and future directions of physical field assisted extraction (PFAE) of pectin are also discussed to facilitate a better understanding of the complex mechanism in PFAE and optimizing operational parameters. This review may also provide specific theoretical information and practical applications to improve the design and scale up PFAE of pectin.

A Comparative Assessment on the Recovery of Pectin and Phenolic Fractions from Aqueous and DES Extracts Obtained from Melon Peels

This work evaluates the purification of melon peel extracts obtained by two eco-friendly methods: autohydrolysis and sodium acetate/urea/water extraction (1:3:1.6), an alkaline deep eutectic solvent (DES). For that, sequential ethanol precipitation and resin adsorption/desorption stages were proposed for the separate recovery of the pectic and phenolic fractions. In order to screen the optimal purification conditions, in a first step, the effect of ethanol concentrations (from 70 to 85%) on the precipitation of pectic oligosaccharides was assayed. Subsequently, the influence of the selected resin (Amberlite XAD4, XAD16HP and XAD7HP), liquid/resin ratios, and desorption sequences (varying ethanol concentrations and pH) on the phenolic compounds was also studied. The highest pectin yields were achieved with 85% ethanol: 16.11 and 18.05 g pectin/100 g water-insoluble solids (WIS) for autohydrolysis and DES extracts, respectively. All pectins presented a galacturonic acid content of about 45%, while autohydrolysis pectin presented a higher amount of neutral sugar side chains. The presence of low methoxyl GalA and both linear and branched OGalA with DP from 2 to 20 was also confirmed by FTIR and HPAEC-PAD analysis, respectively. Concerning the phenolic fraction, the resin adsorption and desorption steps at the selected conditions (XAD4 resin, liquid/resin ratio of 2 mL/g, eluted with 50% ethanol thrice) resulted in 79.55 and 4.08 mg GAE/g non-volatile content (NVC) for autohydrolysis and DES extracts, respectively, with improved antioxidant capacity. Moreover, some phenolic acids (protocatechuic and ferulic acids) and flavonoids (orientin, vitexin and naringenin) were quantified in the extracts by HPLC–PDA-MS/MS.