Low rate of dislocation of dual-mobility cups in primary total hip arthroplasty

Incidence, treatment, and outcomes of modern dual-mobility intraprosthetic dissociations

Aims

Dual-mobility (DM) components are increasingly used to prevent and treat dislocation after total hip arthroplasty (THA). Intraprosthetic dissociation (IPD) is a rare complication of DM that is believed to have decreased with contemporary implants. This study aimed to report incidence, treatment, and outcomes of contemporary DM IPD.

Methods

A total of 1,453 DM components were implanted at a single academic institution between January 2010 and December 2021: 695 in primary and 758 in revision THA. Of these, 49 presented with a dislocation of the large DM head and five presented with an IPD. At the time of closed reduction of the large DM dislocation, six additional IPDs occurred. The mean age was 64 years (SD 9.6), 54.5% were female (n = 6), and mean follow-up was 4.2 years (SD 1.8). Of the 11 IPDs, seven had a history of instability, five had abductor insufficiency, four had prior lumbar fusion, and two were conversions for failed fracture management.

Results

The incidence of IPD was 0.76%. Of the 11 IPDs, ten were missed either at presentation or after attempted reduction. All ten patients with a missed IPD were discharged with a presumed reduction. The mean time from IPD to surgical treatment was three weeks (0 to 23). One patient died after IPD prior to revision. Of the ten remaining hips with IPD, the DM head was exchanged in two, four underwent acetabular revision with DM exchange, and four were revised to a constrained liner. Of these, five (50%) underwent reoperation at a mean 1.8 years (SD 0.73), including one additional acetabular revision. No patients who underwent initial acetabular revision for IPD treatment required subsequent reoperation.

Conclusion

The overall rate of IPD was low at 0.76%. It is essential to identify an IPD on radiographs as the majority were missed at presentation or after iatrogenic dissociation. Surgeons should consider acetabular revision for IPD to allow conversion to a larger DM head, and take care to remove impinging structures that may increase the risk of subsequent failure.

Dual-mobility tripod cup for revision hip arthroplasty: long-term (five to fourteen years) evaluation of a new generation cementless implant

PURPOSE

The aims of this study were to evaluate the survivorships of a new generation cementless DMC with tripod additional fixation in revision total hip arthroplasty and complications at a minimum five year follow-up.

METHODS

One hundred and fifteen revisions (THA) treated with tripod DMC performed between 2009 and 2015 were included in this retrospective study. Acetabular defects were classified as Paprosky 1 (n = 38, 33%), 2 (n = 75, 65%) or 3 (n = 2, 2%). Unipolar or bipolar revision was performed for the following indications: aseptic acetabular loosening (63%), infection (14%), aseptic bipolar loosening (11%), instability (4%), aseptic femoral loosening (3%), ALVAL (3%) and iliopsoas impingement (2%). Mean follow-up was 9.4 years ± two (range, 5 to 14).

RESULTS

At the final follow-up, a single episode of dislocation occurred within three months after the procedure (0.8%) with no revision. Three cases of aseptic loosening were diagnosed (2.6%). Four infections (3.5%) required reoperation: three required a two stage bipolar revision; one was treated by DAIR procedure. At the latest follow-up, the survivorship of the acetabular cup for aseptic loosening was 98% [95% CI (91.2-99.4)] and for any reasons was 94.4% [95% CI (90.1%-98.9%)]; the mean HHS improved from 60 points (range, 18-94 points) to 83 points (range, 37-100 points) (p < .001).

CONCLUSION

This study reports a low complication rate in favour of the use of a tripod DMC in revision THA with a satisfactory survivorship at a ten year follow-up.

A Meta-Analysis to Evaluate Implant Survival and Benefits of the Use of Dual Mobility Constructs in Total Hip Replacement Following Hip Fracture

Total hip replacement (THR) is commonly performed to treat hip fractures. Dual-mobility constructs (DMCs) are increasingly used for this indication. The aim of this study was to use evidence synthesis techniques to estimate net all-cause construct survival for THR with DMC performed for hip fracture. Additionally, we aimed to investigate and describe differences in all-cause construct survival (if present) between THRs performed with DMC (DMC-THR) or with a conventional bearing construct following hip fracture. We performed a systematic review and meta-analysis of published studies (including joint registries), including DMC-THR for hip fracture which provided Kaplan-Meier (KM) survival estimates. The primary outcome was all-cause construct survival over time. The study was prospectively registered on PROSPERO (CRD42020173117). A total of 557 papers and 17 registry reports were identified. Six studies (four registry reports, one matched-pair cohort study utilising joint registry data, and one single-institution case series) met the inclusion criteria, including 17,370 DMC THRs and 167,377 conventional THRs. Five-year KM survival estimates (95% confidence intervals) were similar at 95.4% (94.9 to 95.8%) for DMC-THR and 96.2% (96.0 to 96.4%) for conventional THR. The relative risk of revision for DMC-THR at five years was 1.21 (1.05 to 1.41). These results suggest that DMC-THR has a lower all-cause survival than conventional THR following hip fracture. This analysis does not support the routine use of DMC-THR over conventional bearing THR.

Dual Mobility for Oncological Hip Reconstruction: Significantly Reduced Dislocation Rates at 5 years

BACKGROUND

Although dual mobility total hip arthroplasty has become increasingly common in recent years, limited remains known on dual mobility in surgical oncology. This university-based investigation compared dislocation and revision rates of DMs, conventional total hip arthroplasty (THA), and hemiarthroplasties (HAs) for oncological hip reconstruction.

METHODS

An institutional tumor registry was used to identify 221 patients undergoing 45 DMs, 67 conventional THAs, and 109 HAs, performed for 17 primary hip tumors and 204 hip metastases between 2010 and 2020. The median age at surgery was 65 years, and 52% were female. The mean follow-up was 2.5 years. Kaplan-Meier survivorship curves and log-rank tests were done to compare dislocation and revision rates among all 221 patients, after a one-to-one propensity match, based on age, sex, tumor type (metastasis, primary tumor), and tumor localization (femur, acetabulum).

RESULTS

The 5-year survivorship free of dislocation was 98% in DMs, 66% in conventional THAs ( P = 0.03; all P values compared with DMs), and 97% among HAs ( P = 0.48). The 5-year survivorship free of revision was 69% in DMs, 62% in conventional THAs ( P = 0.68), and 92% in HAs ( P = 0.06). After propensity matching, the 5-year survivorship free of dislocation was 42% in 45 conventional THAs ( P = 0.027; compared with all 45 DMs) and 89% in 16 matched HAs ( P = 0.19; compared with 16 DMs with femoral involvement only). The 5-year survivorship free of revision was 40% in matched conventional THAs ( P = 0.91) and 100% in matched HAs ( P = 0.19).

CONCLUSIONS

DMs showed markedly lower rates of dislocation than conventional THAs, with overall revision rates remaining comparable among different designs. DMs should be considered the option of choice for oncological hip reconstruction if compared with conventional THAs. HAs are a feasible alternative when encountering femoral disease involvement only.

LEVEL OF EVIDENCE

III.

Dislocated and Dissociated Dual-Mobility Components Are Easily Missed and More Than Half Fail Closed Reduction: Six Tips to Aid Management

Dual-mobility (DM) implants reduce the risk of dislocation in patients who have undergone total hip arthroplasty (THA); however, DM implants are at risk for large-head dislocation and intraprosthetic dissociation (IPD), where the inner femoral head dissociates from the outer polyethylene head. This study aimed to report the incidence of DM dislocation and IPD, evaluate the rate of recognition of IPD before and after reduction, investigate the outcomes of these complications, and provide treatment recommendations for their management.

Methods

Between 2010 and 2021, 695 primary and 758 revision THAs were performed with DM constructs at a single institution. There were 44 large-head dislocations (3.0%) and 10 IPDs (0.7%). Four additional IPDs occurred during attempted closed reduction, increasing the IPD incidence to 0.96%. We reviewed prior instability history, dislocation management, success of reduction, recognition of IPD, and subsequent rates of revision and complications. The mean follow-up was 2.5 years.

Results

Nine of 10 IPDs were missed at presentation and thus not treated as such. Sixty-three percent of attempted closed reductions in the emergency department failed and led to 4 IPDs and 1 periprosthetic fracture. Reduction success was associated with the following factors: use of general anesthesia with paralysis (p = 0.02), having the reduction performed by an orthopaedist (p = 0.03), and undergoing only 1 reduction attempt (p = 0.015). Two-thirds of dislocations required revision. The rate of redislocation was 33%, and 5 hips required subsequent revision at a mean of 1.8 years after the initial dislocation.

Conclusions

We present an evaluation of DM-implant dislocation and dissociation along with management recommendations based on these data. Given the low success and high complication rates of attempted closed reduction and the need for eventual revision, we recommend that all patients with dislocated DM implants be brought to the operating room for closed reduction as well as potential revision if the reduction fails.

Level of Evidence

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

No Difference in Dislocation Rates Comparing DMC-THA for Displaced Femoral Neck Fracture and for Osteoarthritis-A Matched-Pair Analysis

Background

We hypothesized the risk of prosthetic instability would be similar in patients treated for femoral neck fracture (FNF) comparatively to patients treated for osteoarthritis (OA) using a dual-mobility cup-total hip arthroplasty (DMC-THA).

Methods

One hundred and nine patients (109 hips), with a mean age of 69.6 ± 3 years (65-75 years), underwent DMC-THA using a posterolateral approach for a FNF (study group). Patients were matched for age and sex with 109 OA patients treated by the same procedure (control).

Results

Postoperatively, there were four dislocations of the large articulation in the study group, and none in the control (p = 0.12). Periprosthetic joint infection (PJI) was the most common surgical complication and was more frequent in the study group. Postoperatively, functional results were at least good in > 90% patients in both groups. At the last follow-up, patients in the study group had recovered autonomy and physical activity comparable to those of the preoperative period.

Conclusion

We found no increased risk of dislocation after DMC-THA using a posterolateral approach for FNF as compared to the same procedure for OA. In this study, function and independence were restored postoperatively in the vast majority of patients. DMC-THA appears as a viable therapeutic option in autonomous patients with a displaced FNF.

Prevalence of groin pain after primary dual-mobility total hip arthroplasty

BACKGROUND

Instability remains a challenging problem following total hip arthroplasty (THA). Dual-mobility (DM) components are used with increasing frequency to mitigate this potential complication. As has been shown with larger metal-on-metal (MoM) THA, the larger size femoral head may pose an increased risk of groin pain. This study aims to evaluate the prevalence of groin pain following primary DM THA compared to other THA constructs.

METHODS

We identified 190 primary THAs (183 patients) performed with DM components at a single academic institution from 2008 to 2017. We retrospectively reviewed standardised patient questionnaires and the electronic medical record to determine the prevalence of groin pain. DM patients were compared to historical controls of 39 MoM hip resurfacing, 26 large-head MoM THA, and 217 conventional THA. Mean age was 64 years, 58% were female, mean body mass index was 30 kg/m², and mean follow-up was 3.5 years (range 2-8 years).

RESULTS

The prevalence of groin pain in patients with DM components was 5%, similar to the prevalence reported by patients with conventional THA (7%). There was a decreased prevalence of groin pain in DM patients compared to hip resurfacing (18%) and MoM THA (15%). Among the 9 DM patients with groin pain, 1 was treated with iliopsoas injection, and 1 underwent radiofrequency ablation of the articular nerve.

CONCLUSIONS

This study documents a relatively low prevalence of groin pain among primary DM THA patients. This is comparable with historical controls of conventional THA and decreased compared to hip resurfacing and large head MoM THA.

The Role of Dual-Mobility Components in Total Hip Arthroplasty

➤

Dual mobility (DM) refers to a now widely available option for total hip articulation. DM implants feature a small inner head, a hard bearing, that connects via a taper fit onto the femoral trunnion. This head freely rotates but is encased inside a larger, outer polyethylene head that articulates with a smooth acetabular component.

➤

DM acetabular components are available in the form of a monoblock shell or as a liner that is impacted into a modular shell, providing a metal articulation for the polyethylene outer head.

➤

DM is designed to increase hip stability by providing the arthroplasty construct with a higher jump distance, head-to-neck ratio, and range of motion prior to impingement.

➤

The use of DM in total hip arthroplasty continues to increase in the United States for both primary and revision arthroplasty. Surgeons should be aware of the potential benefits and pitfalls.

➤

Long-term data are lacking, especially for modular DM implants. Points of concern include a potential for accelerated polyethylene wear, intraprosthetic dislocation, and modular backside fretting corrosion.

Dual-Mobility Cups in Primary Total Hip Arthroplasty

Dual-mobility cups (DMCs) were introduced in France more than 40 years ago and are increasingly used not only in hip revision but also primary hip arthroplasty. Due to a simulated large-head articulation and increased jumping distance, DMCs can contribute to a high range of motion in the hip joint and reduce the risk of instability. Numerous studies have reported low dislocation rates and high survival rates in the mid-term follow-up. Nevertheless, long-term data, especially on primary hip replacement, remain limited, and the effect of recent designs and material innovations is still unclear. Therefore, primary DMCs are mainly proposed in patients at high risk for dislocation (i.e. pelvitrochanteric insufficiency, compromised spinopelvic mobility, neuromuscular disorders, obesity and femoral neck fractures). Based on a review of recently published studies referring to these indications, the current study discusses the advantages and disadvantages of DMCs.

The Impact of Epilepsy on Complication Rates After Total Joint Arthroplasty: A Propensity Score-Matched Cohort Study

BACKGROUND

It is unclear how epilepsy may affect total joint arthroplasty outcomes. The purpose of this study is to analyze the impact of epilepsy on prosthesis-related complications following primary total hip arthroplasty (THA) and total knee arthroplasty (TKA).

METHODS

A retrospective cohort study was conducted using a national database. Patients who have epilepsy underwent a primary THA (n = 6,981) and TKA (n = 4,987) and were matched 1:4 (THA, n = 27,924; TKA, n = 19,948). Rates of low-energy falls and prosthesis-related complications within 2 years postoperatively were compared for patients who did and did not have epilepsy with multivariable logistic regression.

RESULTS

After primary TKA, patients who have epilepsy exhibited significantly higher rates of aseptic revision (4.3% versus 3.5%, odds ratio [OR] 1.21, P = .017) and revision for prosthetic joint infection (1.8% versus 1.3%, OR 1.29, P = .041). THA patients who have epilepsy exhibited significantly higher rates of prosthetic dislocation (3.2% versus 1.9%, OR 1.54, P < .001), periprosthetic fracture (2.2% versus 0.8%, OR 2.39, P < .001), and aseptic loosening (1.7% versus 1.1%, OR 1.40, P = .002). Rates of low-energy falls within 2 years after TKA (14.1% versus 6.4%, OR 2.19, P < .001) and THA (33.6% versus 7.5%, OR 5.95, P < .001) were also significantly higher for patients who have epilepsy.

CONCLUSION

Epilepsy was associated with significantly higher rates of falls (P < .001) and prosthesis-related complications after primary THA (P < .05) and TKA (P < .05). Precautions should be implemented in this population during intraoperative and perioperative decision-making to reduce complication risk.

LEVEL OF EVIDENCE

Level III.

Analysis of an explanted dual mobility cup after 21 years, parabolic wear pattern: A case report

CASE

A dual mobility cup was implanted in 1983 in a 43-year woman. After 31 years of normal function, we analysed the explanted materials with modern techniques.

CONCLUSION

Volumetric wears of the small and large articulations of the dual-mobility construct were similar. For the first time, we demonstrated that the dual-mobility liner underwent parabolic (not linear) wear during the period of implantation.

No dislocation and low complication rate for a modern dual mobility cup with pre-impacted femoral head in primary hip replacement: A consecutive series of 175 hips at minimum 5-year follow-up

INTRODUCTION

Despite its excellent results in preventing dislocation, the dual mobility cup (DMC) is still struggling to be adopted by some teams due to premature wear and loosening reported on first-generation implants. Therefore, this study aimed to assess the mid-term survivorship of a modern DMC with a pre-impacted head and the radio-clinical results at a minimum follow-up of 5 years.

METHODS

This was a retrospective single-centre study performed on patients who had a primary total hip replacement for osteoarthritis in 2016. The cup was a third-generation DMC with a pre-impacted femoral head. Clinical (harris hip score (HHS)) and radiological (cup abduction, anteversion, overhang, and radiolucent lines) results were recorded, as well as complications, particularly dislocations and survivorship. A minimum of five years of follow-ups was required.

RESULTS

One hundred and seventy-five hips (167 patients) met the inclusion criteria. Five hips (2.9%, 5/175) were lost to follow-up and excluded from the postoperative analysis. The mean follow-up period was 70 ± 2.9 months [63.6-76.5]. Three cups needed revision surgery (1.8%, 3/170): one for septic loosening, and two for chronic infection. At 77 months, the global survival probability was 98.2% ± 1, and the survival probability excluding septic aetiology was 100%. There was a significant improvement in the HHS from pre-operatively (48.3 ± 6.0 [14.0-70.0]) to post-operatively (96 ± 4.5 [50-100]) (p < 0.0001). There were no postoperative dislocations recorded, nor any iliopsoas-impingement or symptomatic cam-effect.

DISCUSSION

This study showed excellent survival and good radiological and clinical results of this dual mobility cup at a mid-term follow-up. None of the patients had dislocation or any specific complication feared with dual mobility cups.

Dual Mobility Cup in Fractures of the Femoral Neck in Neuromuscular Disorders and Cognitive Dysfunction Patients above 60 years-old

Objectives

Dislocation rate of total hip arthroplasty (THA) can be as high as 20% for patients with fracture neck of femur, which is a disastrous complication in these vulnerable patients. Numerous techniques, including bipolar arthroplasty and constrained liner, have been adopted to minimize the risk of dislocation. We aimed to evaluate the role of dual mobility Cups in treating patients with fractures of the femoral neck with high risk of postoperative dislocation due to neuromuscular instability disorders.

Methods

A prospective cohort study was conducted (place is blinded as asked during submission), between 2016 and 2019, with a post-operative follow up period of two years. We included skeletally mature patients with femoral neck fractures having neuromuscular disorders and cognitive dysfunction who are candidates for THA above 60 years. Patients were then followed up clinically and radiographically at the clinic using Harris Hip Score (HHS) and x-rays at six weeks, six months, one year and two years postoperatively.

Results

Twenty patients (20 hips) with femoral neck fractures with high risk of postoperative dislocation due to neuromuscular instability disorders undergoing dual mobility cup were included. The mean age of patients was 70.5 ±6.42 years. There is highly significant difference between HHS preoperatively and postoperatively (six weeks, six months and one, two years) p<0.001.Infection occurred in one case (5 %), sciatic nerve injury occurred in one case (5%), and none of the patients had postoperative dislocation.

Conclusion

Dual mobility cup is effective in preventing early dislocation in patients suffered from fracture neck of femur with muscle weakness due to neurologic disorders.

WHICH PROBLEMATICS IN THA AFTER ACETABULAR FRACTURES: EXPERIENCE OF 38 CASES

BACKGROUND

Within a timeframe of 8 years (2008-2016), 38 patients have undergone total hip replacement surgery for coxarthrosis or aseptic necrosis secondary to acetabulum fractures.

MATERIALS AND METHODS

The study included 27 males and 11 females between 42 and 70 years of age, all of whom came from other institutions. The follow-up period ranged between a minimum of 4.6 and a maximum of 9.7 years.

RESULTS

At the final follow-up, all patients were evaluated using the Merle D'Aubigne and Pastel model. Optimal results were found in all the cases. Three patients benefited from surgical revisitation with implant exchange following infection and one/two state reimplatation at seven, fourtheen et twenty-seven months respectively. Two patients benefited from cotyle revision due to chronic instability of the implant.

CONCLUSIONS

The scope of the study was to present all the possible surgical difficulties that can come up with prosthetic implants. More particularly, hip implants after acetabulum fractures qualifies as a "difficult primary implant".

The Saturne cementless dual-mobility cup grants satisfactory long-term survival

Purpose

To report long-term survival and clinical outcomes of primary total hip arthroplasty (THA) using a Saturne cementless dual-mobility (DM) cup, and investigate whether patient demographics or surgical parameters affect clinical scores.

Methods

A consecutive series of primary THAs implanted with Saturne cementless DM cups between 01/09/2009–31/12/ 2011 was retrospectively assessed. Patients were postoperatively evaluated using modified Harris hip score (mHHS) and forgotten joint score (FJS). Complications, reoperations, and revisions were noted. Regression analyses were performed to determine associations of postoperative mHHS with preoperative and intraoperative variables. Ten-year Kaplan–Meier survival was calculated.

Results

Of 308 patients (308 hips), 111 (36%) had died with their original cups in place, 29 (9%) were lost-to-follow-up, and 5 (2%) required cup revision, leaving a final cohort of 163 (53%) with their original cup in place at a follow-up of ≥ 10 years. Ten-year survival was 98% considering cup revision for any reason as endpoint; 99% considering cup revision for aseptic loosening as endpoint; 96% considering stem revision for any reason as endpoint; and 96% considering any revision as endpoint. The final cohort of 163 patients was assessed at 11 ± 1 years (range, 10–13), mHHS was 85 ± 16 (range, 31–100) and FJS was 84 ± 24 (range, 0–100). Multivariable regression analysis revealed that postoperative mHHS significantly worsened with age (β = -0.48, p = 0.007) and BMI (β = -0.70, p = 0.008), as well as for 22 mm head sizes (β = -6.98, p = 0.046).

Conclusions

The Saturne DM cup granted satisfactory survival and clinical outcomes at a minimum follow-up of 10 years, and resulted in no cases of intra- or extra-prosthetic dislocations.

Modular dual-mobility articulations in patients with adverse spinopelvic mobility

AIMS

Adverse spinal motion or balance (spine mobility) and adverse pelvic mobility, in combination, are often referred to as adverse spinopelvic mobility (SPM). A stiff lumbar spine, large posterior standing pelvic tilt, and severe sagittal spinal deformity have been identified as risk factors for increased hip instability. Adverse SPM can create functional malposition of the acetabular components and hence is an instability risk. Adverse pelvic mobility is often, but not always, associated with abnormal spinal motion parameters. Dislocation rates for dual-mobility articulations (DMAs) have been reported to be between 0% and 1.1%. The aim of this study was to determine the early survivorship from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) of patients with adverse SPM who received a DMA.

METHODS

A multicentre study was performed using data from 227 patients undergoing primary total hip arthroplasty (THA), enrolled consecutively. All the patients who had one or more adverse spine or pelvic mobility parameter had a DMA inserted at the time of their surgery. The mean age was 76 years (22 to 93) and 63% were female (n = 145). At a mean of 14 months (5 to 31) postoperatively, the AOANJRR was analyzed for follow-up information. Reasons for revision and types of revision were identified.

RESULTS

The AOANJRR reported two revisions: one due to infection, and the second due to femoral component loosening. No revisions for dislocation were reported. One patient died with the prosthesis in situ. Kaplan-Meier survival rate was 99.1% (95% confidence interval 98.3 to 100) at 14 months (number at risk 104).

CONCLUSION

In our cohort of patients undergoing primary THA with one or more factor associated with adverse SPM, DM bearings conferred stability at two years' follow-up. Cite this article: Bone Joint J 2022;104-B(7):820-825.

The Incidence and Temporal Trends of Dislocation After the Use of Constrained Acetabular Components and Dual Mobility Implants in Primary Total Hip Replacements: A Systematic Review and Meta-Analysis of Longitudinal Observational Studies

BACKGROUND

Dislocation after a primary total hip replacement (pTHR) remains a common cause of treatment failure. Constrained acetabular components (CACs) and dual mobility implants (DMIs) may mitigate this in patients at high risk of dislocation or with significant intraoperative instability. This meta-analysis evaluated the incidence and temporal trends of dislocation after implantation with CACs and DMIs in pTHR.

METHODS

Longitudinal studies reporting dislocation after the use of CACs or DMIs in pTHR were sought from Medline and Embase to September 2020. Secondary outcomes included revision surgery for dislocation and for all causes.

RESULTS

A total of 46 studies (3 CAC and 43 DMI) comprising 582 CACs and 18,748 DMIs were included. The pooled incidence of dislocation was 1.08% (95% confidence interval [CI]: 0.00-3.72; range 0.27%-2.60%) over a weighted mean follow-up of 4.1 years for CACs, compared with 0.25% (95% CI: 0.08-0.46; range 0.00%-4.72%) over 6.2 years for DMIs. For DMIs, there was a temporal decline in dislocations from the 1980s onward, and dislocation rates remained low (<1%) until 15 years postoperatively. There were insufficient data for similar analysis of CACs. All studies were at high risk of bias. The incidence of revision for dislocation after CACs was 0.3% vs 0.1% for DMIs, and the incidence of revision for all causes after CACs was 4.8% vs 2.7% for DMIs.

CONCLUSION

DMIs demonstrated a lower incidence of dislocation compared with CACs; however, there was a relative absence of CACs used in the context of pTHR in the literature. Temporal trends in dislocation have improved over time for DMIs.

Survival and complications of total hip arthroplasty using third-generation dual-mobility cups with non-cross-linked polyethylene liners in patients younger than 55years

BACKGROUND

In younger patients, total hip prostheses are subjected to wide motion ranges and wear-inducing forces. Dual-mobility cups (DMCs) are effective in decreasing the risk of dislocation. However, wear and osteolysis have been reported with first-generation DMCs. These complications have not been assessed in younger patients managed with third-generation DMCs associated with a lower risk of intra-prosthetic dislocation (IPD). We therefore designed a retrospective study of patients younger than 55years at THA with third-generation DMCs. Our objectives were to evaluate (1) the complication rate, and (2) the survival rate.

HYPOTHESIS

The rate of complications of THA with third-generation DMCs in patients younger than 55years of age is comparable to that in the general population of THA patients.

MATERIAL AND METHODS

This retrospective study included 79 consecutive patients (91 hips) who had total hip arthroplasty (THA) between 2007 and 2012. We included all patients younger than 55years who underwent primary THA with a third-generation DMC and a liner made of non-cross-linked polyethylene. The patients were evaluated clinically and radiologically.

RESULTS

Mean follow-up was 9.8years (range: 2-13years). At last follow-up, no patient had experienced prosthetic dislocation or IPD. Aseptic and septic cup loosening each occurred in 1 patient. In all, 7 (7.7%) patients required revision surgery with exchange of at least one component (cup loosening, n=2; neck fracture with a short stem fixed to the neck, n=1; peri-prosthetic femoral fracture, n=1; infection, n=1; and femoral-stem loosening, n=2). Peri-acetabular osteolysis developed in 2 (2.2%) hips. Cup survival to aseptic loosening was 98.9% (95% confidence interval, 97%-100%) and survival to revision for any reason except infection was 95.6% (95% confidence interval, 82%-100%).

DISCUSSION

In patients younger than 55years, third-generation DMCs were associated with absence of prosthetic dislocation, absence of IPD, and a low revision rate for cup loosening, in the medium term. These implants therefore constitute a viable treatment option in younger patients requiring THA.

LEVEL OF EVIDENCE

IV, retrospective study.

Long-term survival of the Lefèvre retentive cup: 12-year follow-up analysis of 466 consecutive cases

INTRODUCTION

The Lefèvre retentive cup is a salvage solution for total hip replacement at high risk of dislocation. Only a few studies have reported the medium or long-term survival; most often, only a small number of patients were included in these studies. This led us to conduct a retrospective analysis of a large population to determine: 1) the 10-year survival rate after primary or revision arthroplasty, 2) the complication rate.

HYPOTHESIS

The dislocation rate is<5% for revision arthroplasty and<2% for primary arthroplasty.

MATERIAL AND METHODS

This single-center retrospective study included 466 consecutive total hip replacements performed with the Lefèvre retentive cup with a 12-year theoretical minimum follow-up (1/1/1998 to 31/8/2006). There were 257 indications for primary arthroplasty and 209 for revision arthroplasty. The cohort had 316 women and the mean age at surgery was 72.9years (30.2-89.9). The mean follow-up was 10.2±5 years (0.1-19.3). A statistical analysis was done based on the Kaplan-Meier survival curves in two subsets of patients: primary and revision surgery.

RESULTS

At the final review, 264 patients had died because of reasons unrelated to the procedures (mean 7.8±4.7years after the procedure), 48 were lost to follow-up (mean 3.0±3.3years after the procedure), and 39 patients (8%) had undergone acetabular revision of which 12 were for infection (2.5%), 25 were for loosening (5.4%) (5 femoral loosening only) and 2 were for dislocation (0.4%). In all, there were 10/466 dislocations (2.1%) of which 5/257 (1.9%) were in the primary group and 5/209 (2.4%) were in the revision group: 2 had a cup exchange and 8 were reduced by closed procedures. The probability of survival free of mechanical complications at 10years was estimated at 94.8%±1.6% (95% CI: 91.6%-98.0%) for the primary group and 87.8%±2.7% (95% CI: 82.4%-93.2%) for the revision groups (p=0.0017). There were 39 re-operations in the overall cohort: 1/257 (0.4%) for dislocation, 7/257 (2.7%) for aseptic loosening and 3/257 (1.2%) for infection in the primary group, while in the revision group, 1/209 (0.5%) was for dislocation, 18/209 (8.6%) for aseptic loosening and 9/209 (4.3%) for infection.

CONCLUSION

The Lefèvre retentive cup has good long-term survival with a low mechanical complication rate, both in primary and revision surgery. To us, this implant appears to be a reliable salvage procedure for total hip replacement in patients at high risk for dislocation.

LEVEL OF EVIDENCE

IV; retrospective study without control group.

Cementless hydroxyapatite-coated stem with dual mobility and posterior approach in over-80 year-old patients with osteoarthritis: Rates of dislocation and periprosthetic fracture at a mean 8 years' follow-up

BACKGROUND

Straight cementless stems are common in primary total hip arthroplasty (THA) in the elderly, but controversial due to higher risk of loosening and periprosthetic fracture (PPF). Apart from registries, results for the Corail implant and dual mobility (DM) in over-80 years-old are not known, notably in case of systematic association to a DM cup. We therefore performed a retrospective analysis of Corail implants in patients aged≥80years at implantation for osteoarthritis of the hip, assessing 1) PPF rate and survival for cementless straight stems associated to DM cups, 2) complications, and dislocation in particular, and 3) clinical scores.

HYPOTHESIS

PPF and dislocation rates are low in THA with cementless straight stem associated to DM cup in patients aged≥80years.

PATIENTS METHODS

A retrospective study was conducted in our department for the period July 2007 to December 2012. Inclusion criteria were age≥80years, with primary THA for osteoarthritis. Exclusion criteria were revision procedure and femoral neck fracture. One hundred and twenty-eight consecutive THAs were included, in 120 patients, with a minimum 5years' follow-up. Clinical results were assessed on Harris Hip Score (HHS) and Oxford Hip Score (OHS). Data were collected for PPF or dislocation and other complications.

RESULTS

At a mean 8±1 years' follow-up (range, 5-10 years), 66 patients (55%, for 68 hips) were alive, 48 (40%, for 54 hips) had died, and 6 (5%, for 6 hips) were lost to follow-up. Median age at surgery was 83years (range, 80-93years). Mean OHS at last follow-up was 41±6 (range, 21-48) and HHS 83±14 (range, 23-100) with mean gain of 32 points (95% CI, [28-36]; p<0.001)). There were 2 cases (1.6%) of PPF, at 2 and 65months, and no dislocations or cases of aseptic loosening. There were 2 cases (1.6%) of intraoperative calcar fracture, treated by wire cerclage with immediate complete weight-bearing, without further complications. With death as a competing risk, cumulative 10-year incidence of femoral stem revision was 1.6% [95% CI: 0.4-6.5], and cumulative incidence of all-cause revision was 4.1% [95% CI: 1.7-9.7].

DISCUSSION

In an over-80 year-old population, primary THA with straight cementless stem and 2nd generation dual mobility cup was an effective option with low risk of PPF or dislocation after a minimum 5-year of follow-up.

LEVEL OF EVIDENCE

IV; retrospective study.

Dual-Mobility Implants and Constrained Liners in Revision Total Hip Arthroplasty

BACKGROUND

Instability remains the most common complication after revision total hip arthroplasty (THA). The purpose of this study was to determine whether there was a difference in aseptic revision rates and survivorship between dual-mobility (DM) and constrained liners (CL) in revision THA.

METHODS

We reviewed a consecutive series of 2432 revision THA patients from 2008 to 2019 at our institution and identified all patients who received either a CL or DM bearing. We compared demographics, comorbidities, indications, dislocations, and aseptic failure rates between the two groups. Bivariate and multivariate regression analyses were used to determine risk factors for failure, and a Kaplan-Meier survivorship analysis was performed with an aseptic re-revision as the endpoint.

RESULTS

Of the 191 patients, 139 (72%) received a DM bearing, and 52 (28%) had a CL. At a mean follow-up of 14.3 months, there was no statistically significant difference in rates of dislocation (10.4% vs 14.0%, P = .667), aseptic revision (30.9% vs 46.2%, P = .073), or time to revision (3.78 vs 6 months, P = .565) between the two groups. The multivariate analysis revealed CL had no difference in aseptic re-revision rates when compared with DM (odds ratio 1.47, 95% confidence interval 0.84-2.52, P = .177). The survivorship analysis found no difference in aseptic failure between the groups at 12 months (P = .059).

CONCLUSION

Both CL and DM bearings have high aseptic failure rates at intermediate term follow-up after revision THA. CL did show a higher risk of failure than DM bearings, but it was not statistically significant with the numbers available for this study. Further prospective studies are needed to determine the optimal treatment for recurrent instability.

Polyethylene wear of dual mobility cups: a comparative analysis based on patient-specific finite element modeling

Purpose

Concerns remain about potential increased wear with dual mobility cups related to the multiple articulations involved in this specific design of implant. This finite element analysis study aimed to compare polyethylene (PE) wear between dual mobility cup and conventional acetabular component, and between the use of conventional ultra-high molecular weight PE (UHMWPE) and highly cross-linked PE (XPLE).

Methods

Patient-specific finite element modeling was developed for 15 patients undergoing primary total hip arthroplasty (THA). Five acetabular components were 3D modeled and compared in THA constructs replicating existing implants: a dual mobility cup with a 22.2-mm-diameter femoral head against UHMWPE or XLPE (DM22PE or DM22XL), a conventional cup with a 22.2-mm-diameter femoral head against UHMWPE (SD22PE) and a conventional cup with a 32-mm-diameter femoral head against UHMWPE or XLPE (SD32PE or SD32XL).

Results

DM22PE produced 4.6 times and 5.1 times more volumetric wear than SD32XL and DM22XL (p < 0.0001, Cohen’s d = 6.97 and 7.11; respectively). However, even if significant, the differences in volumetric wear between DM22XL and SD32XL as well as between DM22PE and SD22PE or SD32PE were small according to their effect size (p < 0.0001, Cohen’s |d|= 0.48 to 0.65) and could be therefore considered as clinically negligible.

Conclusion

When using XLPE instead of UHMWPE, dual mobility cup with a 22.2-mm-diameter femoral head produced a similar amount of volumetric wear than conventional acetabular component with a 32-mm-diameter femoral head against XLPE. Therefore, XLPE is advocated in dual mobility cup to improve its wear performance.

Dislocation rates following total hip arthroplasty via the direct anterior approach in a consecutive, non-selective cohort

AIMS

Use of the direct anterior approach (DAA) for total hip arthroplasty (THA) has increased in recent years due to proposed benefits, including a lower risk of dislocation and improved early functional recovery. This study investigates the dislocation rate in a non-selective, consecutive cohort undergoing THA via the DAA without any exclusion or bias in patient selection based on habitus, deformity, age, sex, or fixation method.

METHODS

We retrospectively reviewed all patients undergoing THA via the DAA between 2011 and 2017 at our institution. Primary outcome was dislocation at minimum two-year follow-up. Patients were stratified by demographic details and risk factors for dislocation, and an in-depth analysis of dislocations was performed.

RESULTS

A total of 2,831 hips in 2,205 patients were included. Mean age was 64.9 years (24 to 96), mean BMI was 29.2 kg/m² (15.1 to 53.8), and 1,595 patients (56.3%) were female. There were 11 dislocations within one year (0.38%) and 13 total dislocations at terminal follow-up (0.46%). Five dislocations required revision. The dislocation rate for surgeons who had completed their learning curve was 0.15% compared to 1.14% in those who had not. The cumulative periprosthetic infection and fracture rates were 0.53% and 0.67%, respectively.

CONCLUSION

In a non-selective, consecutive cohort of patients undergoing THA via the DAA, the risk of dislocation is low, even among patients with risk factors for instability. Our data further suggest that the DAA can be safely used in all hip arthroplasty patients without an increased risk of wound complications, fracture, infection, or revision. The inclusion of seven surgeons increases the generalizability of these results. Cite this article: Bone Joint J 2021;103-B(7 Supple B):38-45.

Dual Mobility Reduces Dislocations-Why I Use It in All Revisions

BACKGROUND

Instability remains the most common complication after revision total hip arthroplasty (THA) and presents a unique treatment dilemma for the orthopedic surgeon. Dual mobility (DM) bearing articulations have been used in France since the 1970s, but have only become more widely adopted in the United States over the last decade. The purpose of this symposium was to discuss the role for DM bearings in revision THA.

METHODS

We reviewed the existing literature on outcomes after DM bearing articulations in revision THA. We also report several case examples of the use of DM in difficult revision THA cases, including acetabular bone loss, failed constrained liner, and adverse local tissue reaction. Finally, we briefly discuss the limitations associated with the use of DM.

RESULTS

Several large retrospective series demonstrate that DM bearings reduce the incidence of dislocation after revision THA when compared with conventional single bearing THA. Specific complications related to DM bearings including polyethylene wear, loosening, intraprosthetic dislocation, and corrosion remain a concern, but appear to have drastically improved over time with modern implant designs.

CONCLUSION

Contemporary DM designs have been established as an effective bearing option to reduce instability in revision THA, although concerns do exist. High-quality prospective studies are necessary to further define the role this bearing option has in the coming years.

Spine Fusions, Yoga Instructors, and Hip Fractures: The Role of Dual Mobility in Primary Total Hip Arthroplasty

BACKGROUND

Despite the increased use of dual mobility (DM) in primary total hip arthroplasty (THA), debate exists regarding the indications for its use. No specific algorithm exists to guide this decision-making process. Therefore, the purpose of this article is to summarize the currently available literature regarding the use of DM in primary THA and provide evidence-based guidelines based on specific patient populations and risk factors for instability.

METHODS

We reviewed the current literature for studies evaluating risk factors for dislocation in primary THA, as well as the clinical use and results of DM in primary THA. Based on the strength of the literature, we discuss the use of DM in specific patient populations. We provide a decision-making algorithm to determine whether a patient may be indicated for DM in primary THA.

RESULTS

Surgeons should consider preoperative patient demographics, risk factors for instability (eg, significant hip-spine issues), type of procedure to be performed (eg, conversion arthroplasty), and indications for surgery (eg, THA for femoral neck fracture). Based on this algorithmic assessment, DM may be warranted in the primary THA setting if a patient's combined risk reaches an established threshold based on the literature.

CONCLUSION

This evidence-based algorithm may help guide current practice in the use of DM in primary THA. We advocate the continued judicious use of DM in hip arthroplasty. Longer term studies are needed in order to evaluate the durability of DM, as well as any complications related to the DM articulation.

Three-dimensional kinematic analysis of dislocation mechanism in dual mobility total hip arthroplasty constructs

Dual mobility (DM) total hip arthroplasty (THA) is associated with reduced dislocation rates; however, the kinematic mechanism of dislocation in DM THA constructs is still not well understood. This study hypothesizes that the difference in kinematics between DM THA and conventional THA designs contributes to reduced dislocation rates of DM THA. In addition, this study aims to quantify and compare those kinematic parameters between DM THA and conventional THA using a validated dual fluoroscopy imaging system (DFIS) and finite element (FE) modelling. Fresh frozen cadavers were measured to compare the impingement-free range of motion and provocative subluxation kinematics among three THA constructs: (1) DM, (2) constrained liner (CS), and (3) 36 mm head diameter neutral liner (NL). The DFIS was used to measure the in vitro kinematics of the hip. Subject-specific FE models were developed to assess the horizontal dislocation distance and resistive torque at dislocation. The DM construct head exhibited increased provocative anterior and posterior subluxation range of motion before dislocation when compared to CS constructs (p = .05; p = .03), as well as NL constructs (p = .05). The DM THA showed a significantly larger posterior horizontal dislocation distance, as well as smaller resistive torque at dislocation, when compared to NL (p = .05; p = .03) and CS constructs (p = .04; p = .01). Our findings demonstrate there was increased provocative subluxation range of motion as well as normalized jump distance for the DM constructs compared to the NL and CS constructs, suggesting the DM THA may provide increased stability hip during at-risk functional hip positions.

Dual-Mobility Articulations in Femoral Neck Fractures: A Systematic Review of the Literature and Meta-analysis of the Outcomes

INTRODUCTION

Femoral neck fractures have been traditionally managed with hemiarthroplasty (HA) or conventional total hip arthroplasty (CTHA). There has been recent interest in using dual-mobility components (DMC) in total hip arthroplasty for patients with femoral neck fractures to provide increased stability and decrease the need for future revision.

METHODS

We conducted a systematic review of the literature reporting on the use of DMC in the management of femoral neck fractures in geriatric patients. We included studies in which DMC were used alone and studies that included a comparison to total hip arthroplasty or HA. The outcomes of interest were postoperative dislocation, revision, and revision surgery rates. Two separate subgroup analyses were conducted. For the comparative studies, we analyzed the differences in outcomes using a random-effects model of relative risks. For the noncomparative studies, we estimated the cumulative incidence of the different outcomes.

RESULTS

Eighteen studies met the inclusion criteria and were included in our analysis. Eleven noncomparative studies showed a cumulative incidence of dislocation to be 1.2% (95% confidence interval = 0.3% to 2.7%) when DMC were used alone. Subgroup analyses of the seven comparative studies yielded a relative risk of dislocation using DMC was 59% less than HA and 83% less than CTHA. DMC also compared favorably in terms of revision surgery and revision rates to HA. There was insufficient quality evidence to comment on revision surgery and revision rates when compared with CTHA in comparative studies, but among the noncomparative studies, there was a low rate of revision and revision surgery.

CONCLUSIONS

Our study revealed overall lower risk of dislocation using DMC compared with both CTHA and HA. There were also lower revision and revision surgery rates when DMC were used compared with HA. Further studies are required to elucidate cost-effectiveness and long-term outcomes of DMC in these scenarios.

LEVEL OF EVIDENCE

Level III-meta-analysis.

Dual mobility versus unipolar total hip arthroplasty for neck of femur fractures: a single centre study

Current national guidelines (NICE) recommends that all medically fit, independently-mobile patients without cognitive impairment receive a total hip arTHAoplasty(THA) for displaced intracapsular neck of femur (NOF) fractures. Dislocation is a concern(2-10%). Dual mobility cups have been suggested to address this complication. Our study sets out to compare dislocation rates between dual mobility cups versus unipolar cups. We performed a retrospective single centre multiple surgeon study of all THAs performed for NOFs between January 2012 and May 2018. A total of 322 total hip replacements (127 dual mobility and 195 unipolar ; Age range of patients, 29 to 91, mean 70 years) were identified for analysis using a database. Data was obtained from electronic patient records and radiographs. 12 patients sustained a dislocation of their THA out of our 322 patients. Of these, 10 dislocations occurred in the unipolar group (5.13%). From the dual mobility cups, 2 had dislocations(1.57%), both with a 28mm head. Both of these dislocations were in alcohol dependent patients with increased susceptibility to falls. Statistical analysis of our data was performed using chi-squared test (p value = 0.0723) In ‘Getting It Right First Time’ (GIRFT), the authors recommend that all patients that sustain a NOF fracture meeting the criteria of a THA to be offered a dual mobility acetabular cup to reduce the risk of dislocation. The cost of the dual mobility acetabular cup is offset from the cost of overall revision surgery. Limitations of our study are its retrospective nature and selection bias.

Use of a modular hip dual-mobility articulation in patients with high risk of dislocation: a relatively small-sized acetabulum in Asian patients may limit its use

BACKGROUND

Dual-mobility hip component is widely used in Europe and North America, because it effectively reduces hip dislocation in primary and revision total hip arthroplasties. However, reports were limited on the use of dual-mobility articulation in Asian populations.

PURPOSE

The aim of this retrospective study was to review the use of modular dual-mobility hip articulation in Asian patients with the high risk factor for hip dislocation. We also discussed the potential concern on the use of dual-mobility articulation in Asian patients.

METHODS

From Jan 2018 to June 2019, 17 patients were included in this study. The mean age of the patients was (73.8 ± 9.5) years (range: 57-88 years). The mean size of acetabular cup and modular DM liner were (49.5 ± 3.4) mm (range, 46-58 mm) and (40.7 ± 3.4) mm (range, 38-48 mm), respectively. The mean follow-up period was (15.8 ± 3.9) months (range, 11-24 months). The primary outcome was the rate of hip dislocation. The secondary outcomes included the Harris Hip Score. Differences were considered statistically significant at p < 0.05.

RESULTS

Hip dislocation, loosening, peri-prosthetic fractures, or intra-prosthetic dislocation was not found in the series. The mean preoperative and postoperative Harris Hip Scores were 42.2 ± 17.2 (range, 15-80) and 74.7 ± 13.5 (range, 52-97), respectively, giving a mean improvement of 32.5 ± 17.2 (range, 4-72). The improvement was statistically significant (p < 0.05).

CONCLUSIONS

In Asian patients with high risk of hip dislocation, the use of modular dual-mobility hip component produces promising outcomes without hip dislocation, but the relatively small-sized acetabulum may limit it widespread application in other populations worldwide.

TRIAL REGISTRATION

HKUCTR-2913 .

Dual-Mobility Cup Total Hip Arthroplasty for Displaced Femoral Neck Fractures: A Retrospective Study With a Median Follow-Up of 5 Years

Introduction:

Patient outcomes following modern dual-mobility cup total hip arthroplasty (DM-THA) remains a concern. Few reports have focused on the use of modern DM-THA in the setting of Asian populations for displaced osteoporotic femoral neck fractures (FNFs). This study aimed to investigate the outcomes of Chinese population with displaced osteoporotic FNFs initially treated with modern DM-THA.

Materials and Methods:

Data from 112 consecutive patients (112 hips) with displaced osteoporotic FNFs initially treated with modern DM-THA during 2011-2018 were retrospectively analyzed. Follow-ups were performed at 3 months, 6 months, 12 months, and then every 1 year after surgery. The primary endpoint was the Harris Hip Score (HHS); the secondary endpoint was the main orthopedic complication rate.

Results:

The mean HHS improved from 58.62 (±15.79) prior to surgery to 86.13 (±9.92) at the final follow-up. The main complication rate was 14.2% (16/112). Sixteen complications in 10 patients were recorded. Of the 16 complications, there were 2 (1.7%) cases requiring revision DM-THA, 3 (2.6%) cases of loosening, 2 (1.7%) cases of migration, 3 (2.6%) intra-prosthetic dislocation (IPD), 4 (3.5%) cases of tilting, and 2 (1.7%) cases of severe wear. The need for revision was attributed to prosthesis loosening associated with poor bony quality.

Conclusion:

In patients with displaced osteoporotic FNFs, DM-THA may yield favorable functional outcomes and a low rate of main orthopedic complications, in particular, a low dislocation rate.

Zurich Cementless Dual Mobility Cup for Canine Total Hip Prosthesis: Implant Characteristics and Surgical Outcome in 105 Cases

Dislocation after total hip arthroplasty (THA) remains a troublesome complication, and a source of frustration for the owner and the surgeon. The dislocation rate of hip prostheses in dogs is reported to range from 4 to 15%, representing the most common short-term complication. This is especially true in large and giant breed dogs, usually requiring revision surgery. With the increase in the number of THA being performed in veterinary surgery, reducing or preventing complications such as postoperative THA dislocation will be of paramount importance. The Zurich cementless dual mobility (DM) system allows impingement-free range of angulation of 80 to 132 degrees between the ceramic head and the polyether ether ketone (PEEK) cup when combined with the range of the PEEK cup in the outer metal cup. In this article, we review the use of the DM cup in THA in large and giant breed dogs, in terms of its history, biomechanics, outcomes and complications based on 105 cases.

Severe Corrosion of Modular Dual Mobility Acetabular Components Identified During Revision Total Hip Arthroplasty

There has been a significant increase in the use of modular dual mobility (MDM) acetabular cups for primary and revision total hip arthroplasty (THA) secondary to decreased dislocation rate and increased impingement-free range of motion. Mating of dissimilar metals in THA can result in mechanically assisted crevice corrosion, with increased serum metal ion levels and potentially adverse local tissue reaction that can lead to revision surgery. In this case report, we present a patient who had THA using MDM components, and his follow-up laboratory testing showed asymptomatic elevated serum cobalt level. The patient subsequently developed an intraprosthetic dislocation that required revision surgery. At the time of revision, significant corrosion was noted on the backside of the modular acetabular liner and the inner surface of the titanium shell. Serum cobalt levels returned to normal after revision surgery. This case suggests that mechanically assisted crevice corrosion at the modular surface of MDM components does occur. In addition, we believe surgeons should judiciously use MDM technology only for patients at significantly increased risk of dislocation after THA.

THA for a Fractured Femoral Neck: Comparing the Revision and Dislocation Rates of Standard-head, Large-head, Dual-mobility, and Constrained Liners

BACKGROUND

THA is a reasonable surgical option for some patients with fragility fractures of the femoral neck, but it has the risk of prosthesis dislocation. The prosthesis combination that reduces the risk of dislocation and the rate of revision surgery is not known.

QUESTIONS/PURPOSES

In patients receiving primary THA for a femoral neck fracture, does (1) the rate of all-cause revision or (2) the reason for revision and rate of revision for dislocation differ among THA with a standard head size, large head size, dual mobility (DM), or constrained liner? (3) Is there a difference in the revision risk when patients are stratified by age at the time of surgery?

METHODS

Data were analyzed for 16,692 THAs performed to treat fractures of the femoral neck reported in the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) from January 2008 to December 2018, as this included the first use of DM prostheses. The AOANJRR includes information on more than 98% of arthroplasty procedures performed in Australia. Most patients were female (72%) and the mean age was 74 years ± 11. There were 8582 standard-head prostheses, 5820 large-head prostheses, 1778 DM prostheses, and 512 constrained prostheses identified. The cumulative percent revision (CPR) was determined for all causes as well as CPR for dislocation. The time to the first revision was described using Kaplan-Meier estimates of survivorship, with right censoring for death or closure of the database at the time of analysis. The unadjusted CPR was estimated each year of the first 10 years for standard heads, 10 years for large heads, 8 years for constrained liners, and 7 years for DM prostheses, with 95% confidence intervals using unadjusted pointwise Greenwood estimates. The results were adjusted for age, sex, femoral fixation, and head size where appropriate and were considered by age groups < 70 and ≥ 70 years.

RESULTS

When adjusted for age, sex, femoral fixation and head size, there was no difference in the rate of all-cause revision at 7 years for any of the four groups. There was no difference in the rate of all-cause revision when patients were stratified by < 70 or ≥ 70 years of age. Dislocation was the most common reason for revision (32%). When analyzing revision for dislocation alone, large-head THA had a lower rate of revision for dislocation compared with standard head (HR 0.6 [95% CI 0.4 to 0.8]; p < 0.001) and DM prostheses had a lower rate of revision for dislocation than standard head for the first 3 months (HR 0.3 [95% CI 0.1 to 0.7]; p < 0.004) but not after this time point.

CONCLUSION

The Australian registry shows that there is no difference in the rate of all-cause revision for standard-head, large-head, DM prostheses or constrained liner THA after femoral neck fractures for all patients or for patients stratified into younger than 70 years and at least 70 years of age groups. Dislocation is the most common cause of revision. Large-head prostheses are associated with a lower revision risk for dislocation and DM prostheses have a lower rate of revision for dislocation than standard heads for the first 3 months only. Surgeons treating a femoral neck fracture with THA might consider a large head size if the diameter of the acetabulum will allow it and a DM prosthesis if a large head size is not possible. The age, life expectancy and level of function of patients with femoral neck fractures minimizes the potential long-term consequences of these prostheses. The lack of significant differences in survival between most prosthesis combinations means surgeons should continue to look for factors beyond head size and prosthesis to minimize dislocation and revision surgery.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Outcome of Dual Mobility Constructs for Adverse Local Tissue Reaction Associated Abductor Deficiency in Revision Total Hip Arthroplasty

BACKGROUND

Treatment of adverse local tissue reaction (ALTR) is challenging owing to high complications and poor outcomes after a revision surgery. As dislocation is the most common cause of reoperation, it is often necessary to use advanced articulations such as dual mobility. This study aims to evaluate the outcome and complication rates after revision surgery with dual mobility constructs, compared to constrained and conventional articulations in the setting of significant abductor deficiency due to ALTR.

METHODS

Out of a total of 338 revision total hip arthroplasties for ALTR, 234 patients with a significant tissue necrosis and abductor muscle insufficiency (grade 3) were evaluated. The complication rates after revisions were compared between 42 hips with dual mobility implants, 24 hips with constrained liners, 104 hips with large diameter heads (36-40 mm), and 64 hips with small diameter heads (≤32 mm).

RESULTS

After an average of 4 years of follow-up (2.8-8.6), the dual mobility articulation had no dislocation, compared to 4.1% and 15.5% for constrained liner and conventional articulations, respectively (P < .001). Utilization of dual mobility and constrained liner cup also did not increase the risk of nondislocation complications, including periprosthetic joint infection and periprosthetic fracture (P = .18 and .52).

CONCLUSIONS

This study demonstrates significantly lower dislocation rates for dual mobility when compared to conventional articulations and comparable to constrained liners in cases of severe abductor deficiency due to ALTR, suggesting that dual mobility implants are viable surgical treatment alternatives to constrained liners to minimize dislocation during revision total hip arthroplasty in the setting of significant abductor deficiency due to ALTR.

Dual-mobility cups could yield lesser infections than conventional cups: a meta-analysis of comparative studies

INTRODUCTION

Dual-mobility cups (DMC) are gaining popularity mainly for their reduced rate of dislocation following total hip arthroplasty (THA). Currently, indication for DMC use extends beyond patients with high risk of dislocation or revision THA cases. Many authors reported DMC outcomes in primary THA for all aetiologies. However, some reports claimed that the use of DMC is accompanied with higher rates of infection compared with conventional cups (CC) in both primary and revision THA.

RESEARCH QUESTION

Does the use of DMC generate higher rates of infection when compared with conventional cups?

OBJECTIVES

The aim of this meta-analysis was to look for significant difference in the rate of post-operative infection between DMC cups and conventional cups.

METHODOLOGY

MEDLINE, Embase, Scopus, Web of Science, Cochrane Library, and Google Scholar were searched since inception. Only studies with comparative design reporting the outcome infection rate were included.

RESULTS

Seventeen retrospective comparative studies were located comprising 248,541 patients: 16,020 in the DMC group and 232,521 in the CC group. The mean follow-up period was 37.5 ± 42 and 50.2 ± 48.7 months for the DMC and CC groups, respectively. The meta-analytical results indicated the following: (a) significantly lesser infections following DMC compared with CC in revision THA (odds ratio (OR) = 0.75 (95% CI = 0.653 to 0.874, P = 0.0002, I² = 25%); (b) for primary THA and for large-sampled registries, significance was found using only the fixed-effects model estimate; and (c) no significant difference was found for the subgroup of cohort studies.

CONCLUSION

Our results clearly refute the claim that DMC would yield higher rates of infection. On the contrary, the findings demonstrated that the use of DMC reduces the risk of post-operative infection in revision THA and a similar lower infection trend for primary THA when compared with the standard cups.

[Hip-spine syndrome-current developments and state of the evidence]

The movements between the spine, pelvis and hip joints are coordinated to allow for a physiological balance of the upper body and the pelvis during sitting and standing. Degenerative changes or spondylodesis of the spine result in decreased pelvic mobility and can lead to increased rates of instability in the presence of total hip arthroplasty (THA). To reduce the risk of THA dislocation several authors have recently recommended functional radiographs of the spine and pelvis, as well as individual safe zones for THA components. The aim of this article is to summarize the current body of knowledge regarding the influence of spinopelvic alignment on THA and provide recommendations for everyday clinical practice.

Absence of instabilities and intra-prosthetic dislocations at 7 to 11 years following THA using a fourth-generation cementless dual mobility acetabular cup

PURPOSE

Dual-mobility (DM) cups are increasingly used in total hip arthroplasty (THA) but there lacks literature on their long-term results. We aimed to investigate outcomes of a fourth-generation cementless DM acetabular cup at 7-11 years.

METHODS

We retrospectively evaluated 240 consecutive hips that received cementless THA using the same dual mobility cup (Novae Sunfit TH) and femoral stem (Corail). Patients were recalled at ≥7 years to collect Oxford hip scores (OHS), Harris hip scores (HHS), and inspect for radiolucent lines and granulomas. Multi-variable analyses were performed to determine whether HHS or OHS were associated with pre- or intra-operative variables.

RESULTS

At 8.4 ± 0.8 years (range, 7-11), 6 hips were revised (2.5%), 54 deceased (22.5%), and 14 could not be reached (5.8%). Four revisions (2 cup+stem, 2 liners only) were due to sepsis (1.7%), one (cup and stem) for trauma (0.4%), and one (stem) due to aseptic loosening (0.4%). For the remaining 166 hips, HHS was 83.6 ± 13.2 and OHS was 20.3 ± 6.7. Multi-variable analysis confirmed that HHS (β = - 0.38; p = 0.039) and OHS (β = 0.36; p < 0.001) worsened with age, and that OHS was worse for Charnley C patients (β = 3.17; p = 0.009). Neither granulomas nor radiolucenies were observed around any cups, but radiolucenies were seen around 25 stems (20.3%).

CONCLUSIONS

This fourth-generation DM cup demonstrated satisfactory outcomes at 7-11 years, with no instabilities or cup revisions due to aseptic loosening. Better OHS was observed for younger patients and those presenting higher Charnley grade.

LEVEL OF EVIDENCE

Level IV, retrospective case study.

Cost Analysis of Dual-Mobility Constructs in Revision Total Hip Arthroplasty: A European Payer Perspective

Dual-mobility constructs have been shown to significantly and substantially decrease dislocations after revision total hip arthroplasty (THA). The authors have previously shown that dual-mobility (DM) constructs are cost-effective given their ability to decrease dislocations and re-revision for dislocation. The goal was to report the costs of DM and large femoral head (LFH) constructs in revision THAs from a European health care payer perspective. A Markov model was constructed to analyze the costs incurred by payers in the United Kingdom, Germany, Italy, and Spain over 3 years in revision THAs with DM or LFH constructs. Model states and probabilities were derived from prospectively collected registry data in 302 patients who underwent revision THA with a DM or 40-mm LFH construct and were then mapped to corresponding procedural reimbursement codes and tariffs for each country. Costs were weighted average national payments for reintervention procedures performed in the 3 years following revision THA. Probabilistic sensitivity analysis examined the effect of combined uncertainty across all model parameters. During a 3-year period following revision THA, reintervention rates were 9% for DM constructs and 19% for LFH constructs (P=.01). Comparing DM and LFH constructs, cumulative incremental costs over 3-years' follow-up were £428 vs £1447 in the United Kingdom, euro 451 vs euro 1272 in Germany, euro 540 vs euro 1425 in Italy, and euro 523 vs euro 1562 in Spain, respectively. At mid-term follow-up, DM constructs used in revision THAs were associated with a significantly lower risk of reintervention, which translated to lower health care payer costs compared with LFH constructs among European health care payers. [Orthopedics. 2020;43(4):250-255.].

Dual mobility cup in total hip arthroplasty. The experiense of the university hospital

Objective  To evaluate the incidence of prosthetic instability in a consecutive series of 42 cases of total hip arthroplasty using dual mobility cup.

Methods  A retrospective study of 38 patients undergoing primary or revision total hip arthroplasty (THA) using the acetabular dual-mobility cup (DMC) implant between January 2012 and January 2018. The rates of complications and instability after surgery were evaluated.

Results  In total, 42 arthroplasties were performed in 38 patients, with a minimum follow-up of 16 months. The mean age of the sample was 60 years. In 38 cases, we used a cementless DMC, and, in the other 4 cases, a cemented DMC. There were no cases of early or late instability.

Conclusion  The series herein presented proves the good result of the DMC in cases of primary arthroplasty, complex and complicated cases of failed osteosynthesis of proximal femoral fractures, and revision for THA instability. The absence of episodes of prosthetic instability and complications in complex cases of primary and revision THA increases the confidence in this concept.

Prospective randomized study using EBRA-FCA to compare bone fixation between cementless SL-PLUS Zweymüller versus SL-PLUS MIA femoral implants in primary total hip arthroplasty with clinical assessment at a minimum 5years' follow-up

INTRODUCTION

Sometimes the slightest changes in implant design can lead to failure, even for a validated prosthesis. A minimally invasive cementless model, the SL-PLUS MIA™, in which the lateral shoulder is eliminated, was developed from the Zweymüller SL-PLUS™ implant. After satisfactory in-vitro tests, it required in-vivo assessment to ensure that bone fixation is good. We therefore conducted a prospective randomized study comparing the two versions of the Zweymüller femoral stem, with the aim of (1) comparing bone fixation up to 2 years' follow-up on EBRA-FCA radiography; and (2) assessing any difference in clinical or radiographic performance.

HYPOTHESIS

Primary stability assessed on EBRA-FCA does not significantly differ between the SL-PLUS MIA™ and SL-PLUS™ implants.

PATIENTS AND METHOD

A single-center multi-surgeon prospective randomized study included 80 patients (79 were operated on) between April 2009 and October 2012, with a mean 6 years' follow-up. Radiographic assessment used the EBRA-FCA application up to 2 years' follow-up; clinical assessment, with a minimum 5 years' follow-up, was performed by a single observer, using the Harris and Oxford-12 scores. The two groups, SL-PLUS™ (n=38) and SL-PLUS MIA™ (n=41), were comparable in gender, age, indications, body-mass index and preoperative functional status.

RESULTS

At a minimum 2 years' follow-up, 24 SL-PLUS™ and 27 SL-PLUS MIA™ implants were analyzed on EBRA-FCA. Mean migration was respectively -0.3mm±0.8 [range, -1.6 to 1.3] and -0.5mm±0.7 [range, -2.2 to 0.5] (p=0.21). There was likewise no significant difference in varus tilt. The number of ectopic ossifications did not differ, despite the absence of shoulder: 7 with SL-PLUS™ (23%), and 10 with SL-PLUS MIA™ (32%), without clinical impact. Oxford score improved from 43±6.8 to 19±7 at 5 years' follow-up with SL-PLUS ™ and from 44±8.8 to 20±7.4 with SL-PLUS MIA™: i.e., no significant inter-group difference. Likewise, Harris score at 2 years' follow-up did not differ: 91.6±8.7 and 89.7±10.2, respectively. Implant survival did not differ: SL-PLUS MIA™, 41/41 (100%); SL-PLUS™, 36/38 (94.7%) (p=0.13).

CONCLUSION

There was no significant difference in fixation quality between the SL-PLUS™ and SL-PLUS MIA™ implants. Elimination of the shoulder did not jeopardize primary or secondary fixation, but neither did it reduce the rate of ossification. The modified Zweymüller implant appeared risk-free at 6 years' follow-up.

LEVEL OF EVIDENCE

II, low-power prospective randomized study.

Effects of Daily Activities and Position on Kinematics and Contact Mechanics of Dual Mobility Hip Implant

Dual mobility hip implants have been widely introduced to overcome dislocation in recent years. However, the potential influence of different gaits on kinematics and contact mechanics for dual mobility hip implants is still unclear. Furthermore, a large range of motion coupling with the implant position, especially high inclination or anteversion angle, may result in poor kinematics and contact mechanics. A previously developed dynamic finite element method was adopted in this study to examine the kinematics and corresponding stability of dual mobility hip implants under different gaits coupling with different inclinations or anteversion angles. The results showed only inner relative sliding under knee-bending for dual mobility hip implants under moderate inclination and anteversion angles, whereas an anteversion angle of 25° induced both impingement and consequent relative sliding of the outer articulation. However, the impingement (between the stem neck and the liner inner rim) indeed happened under stair-climbing and sitting-down/stand-up as well as combined movements when inclination and anteversion angles were set as 45° and 0°, respectively, and this finally led to relative sliding at the outer articulation. A high inclination angle did not worsen both the impingement and related outer sliding compared to modest inclination and anteversion angles of the liner, but a high anteversion angle prolonged the period of both the impingement and the outer relative sliding. The extreme motions and high anteversion angles are hardly inevitable, and they indeed lead to motions at both articulations for dual mobility hip implants.

Use of dual mobility cups in patients undergoing primary total hip arthroplasty with prior lumbar spine fusion

BACKGROUND

Patients undergoing primary total hip arthroplasty (THA) with prior lumbar spine fusion (LSF) are a high-risk group for instability with reported incidence of dislocation as high as 8.3% using fixed bearing femoral heads. Purpose of this study was to determine risk of post-operative instability in patients undergoing primary THA with a history of prior LSF using dual mobility acetabular cups.

METHODS

This was a multicenter retrospective study with 93 patients undergoing primary THA using a dual mobility cup with a prior history of instrumented LSF. There were 56 females and 47 males with an average age of 66 years (46-87) and average BMI of 30 with mean follow-up of 2.7 years (range 12-124 months). Surgical approach included posterior (63), direct lateral (15), anterior (11), and direct superior (4). Forty-four percent had one level lumbar fusion, 29% with two levels, and 15% with three or more levels fused. The primary outcome investigated was instability.

RESULTS

There were no cases of instability or prosthetic joint infection in this group of patients with prior lumbar spine fusion undergoing primary THA using a dual mobility cup. There was one intra-operative periprosthetic femur fracture and one case of aseptic acetabular cup loosening.

CONCLUSION

Patients undergoing THA with prior LSF are at increased risk for instability due to loss of normal spinopelvic relationship. The use of dual mobility cups in patients with prior LSF undergoing primary THA appears promising with no cases of instability in this high-risk group of patients.

Is Isolated Mobile Component Exchange an Option in the Management of Intraprosthetic Dislocation of a Dual Mobility Cup?

BACKGROUND

Intraprosthetic dislocation is a specific complication of dual mobility cups, although it occurs less frequently with the latest generations of implants. Intraprosthetic dislocation is related to long-term polyethylene wear of the mobile component chamfer and retentive area, leading to a snap-out of the femoral head. With the increased use of dual mobility cups, even in younger and active patients, the management of intraprosthetic dislocation should be defined according to its type. However, no previous studies, except for case reports, have described the strategy to manage long-term wear-related intraprosthetic dislocation, particularly when a dual mobility cup is not loose.

QUESTIONS/PURPOSES

This study aimed to (1) determine the prevalence of intraprosthetic dislocation in this patient population and the macroscopic findings at the time of surgical revision and (2) evaluate whether isolated mobile component exchange could be an option to manage intraprosthetic dislocation occurring with a well-fixed dual mobility cup metal shell.

METHODS

From January 1991 to December 2009, a continuous series of 5274 THAs with dual mobility cups (4546 patients; 2773 women; mean [range] age 58 years [22-87]; bilateral THA = 728) were prospectively enrolled in our institutional total joint registry. A cementless, hemispherical dual mobility cup was systematically implanted, regardless of the patient's age or indication for THA. At the latest follow-up examination, the registry was queried to isolate each occurrence of intraprosthetic dislocation, which was retrospectively analyzed regarding the patient's demographics, indication for THA, radiographs, intraoperative findings (polyethylene wear and lesion patterns on the mobile component, periarticular metallosis, and implant damage because of intraprosthetic impingement of the femoral neck), management of intraprosthetic dislocation (isolated exchange of the mobile component or revision of the dual mobility cup), and outcome.

RESULTS

At a mean (range) follow-up duration of 14 years (3-26), 3% of intraprosthetic dislocations (169 of 5274) were reported, with a mean (range) time from THA of 18 years (13-22). Intraprosthetic dislocation occurred predominantly in younger men (mean [range] age at THA, 42 years [22-64] versus 61 years [46-87]; p < 0.001, and sex ratio (male to female, 1:32 [96 male and 73 female] versus 0.62 [1677 male and 2700 female]; p < 0.001) in patients with intraprosthetic dislocation and those without, respectively, but was not influenced by the indication for THA (105 patients with intraprosthetic dislocation who underwent THA for primary hip osteoarthritis and 64 with other diagnoses versus 3146 patients without who underwent THA for primary hip osteoarthritis and 1959 for other diagnoses (p = 0.9)). In all patients with intraprosthetic dislocation, a macroscopic analysis of the explanted mobile component revealed circumferential polyethylene wear and damage to the chamfer and retentive area, with subsequent loss of retaining power for the femoral head. Nine percent of intraprosthetic dislocations (16 of 169 patients with intraprosthetic dislocations) were associated with aseptic loosening of the dual mobility cup and were managed with acetabular revision without recurrence at a mean (range) follow-up duration of 7.5 years (5-11). Ninety-one percent of intraprosthetic dislocations (153 of 169) were pure, related to wear of the mobile component chamfer and retentive area without aseptic loosening of the dual mobility cup, and managed with isolated mobile component exchange. Intraprosthetic dislocation recurred in 6% (nine of 153) at a mean (range) follow-up interval of 3 years (2-4.5). Additionally, severe premature polyethylene wear of the mobile component with loosening of the dual mobility cup occurred in 12% of patients (19 of 153) at a mean (range) follow-up duration of 1.5 years (0.5-3).

CONCLUSIONS

A failure rate of 18% (28 of 153 patients undergoing isolated mobile component exchange) was reported within 5 years after isolated mobile component exchange to manage intraprosthetic dislocation occurring with a well-fixed dual mobility cup metal shell. The two modes of failure were early recurrence of intraprosthetic dislocation or severe premature metallosis-related polyethylene wear of the mobile component with loosening of the dual mobility cup. Acetabular revision with synovectomy should remain the standard procedure to manage intraprosthetic dislocation, particularly if periarticular metallosis is present. The exception is intraprosthetic dislocation occurring in elderly or frail patients, for whom a conventional acetabular revision procedure would be associated with an unjustified surgical or anesthetic risk.

LEVEL OF EVIDENCE

Level II, prognostic study.

Total hip arthroplasty in acetabular fractures

Total Hip Arthroplasty (THA) is a well-accepted treatment for established hip arthritis following acetabular fractures. If a conservatively managed or operated case progresses to non-union/mal-union failing to restore the joint integrity, it may eventually develop secondary arthritis warranting a total hip arthroplasty. Also, in recent years, acute total hip arthroplasty is gaining importance in conditions where the fracture presents with pre-existing hip arthritis, is not amenable to salvage by open reduction and internal fixation, or, a poor prognosis is anticipated following fixation. There are several surgical challenges in performing total hip arthroplasty for acetabular fractures whether acute or delayed. As a separate entity elderly patients pose a distinct challenge due to osteoporosis and need stable fixation for early weight bearing alleviating the risk of any thromboembolic event, pulmonary complications and decubitus ulcer. The aim of surgery is to restore the columns for acetabular component implantation rather than anatomic fixation. Meticulous preoperative planning with radiographs and Computed Tomography (CT) scans, adequate exposure to delineate the fracture pattern, and, availability of an array of all instruments and possible implants as backup are the key points for success. Previous implants if any should be removed only if they are in the way of cup implantation or infected. Press fit uncemented modern porous metal acetabular component with multiple screw options is the preferred implant for majority of cases. However, complex fractures may require major reconstruction with revision THA implants especially when a pelvic discontinuity is present.

Midterm Clinical and Radiographic Outcomes of a Contemporary Monoblock Dual-Mobility Cup in Uncemented Total Hip Arthroplasty

BACKGROUND

The efficacy of contemporary monoblock dual-mobility (DM) cups to prevent dislocations in total hip arthroplasty (THA) is well reported, but there is little published data on their mid- to long-term outcomes. The authors aimed at reporting the 10-year survival of a contemporary DM cup as well as its clinical and radiographic outcomes.

METHODS

From a retrospective consecutive multicentric series of 516 patients (541 hips) that received uncemented THA between June 2007 and June 2010, 6 patients (6 hips) had cup and stem revisions, 5 patients (5 hips) had isolated stem revision, and 2 patients (2 hips) had isolated insert revision. A total of 103 patients (111 hips) died with their original implants, and 41 patients (42 hips) were lost to follow-up. This left 358 patients (375 hips) for clinical assessment at a median follow-up of 8.7 years (range, 6.8-10.5 years), including 279 patients (290 hips) with postoperative radiographs. Implant survival was calculated using the Kaplan-Meier method, and multivariable analyses were performed to determine whether clinical outcomes are associated with patient or surgical factors.

RESULTS

The 10-year survival considering revision for aseptic loosening as end point was 100% for the cup and 99.2% for the stem. No dislocations were observed, and radiographic assessment revealed 1 acetabular granuloma (0.3%), but no radiolucencies nor fractures. The Harris hip score improved from 49.6 ± 15.5 to 85.2 ± 14.5, and the postoperative Oxford hip score was 19.2 ± 7.6. Multivariable analyses revealed that improvement in Harris hip score increased with cup diameter (beta, 1.28; P = .039).

CONCLUSION

Our data confirmed satisfactory midterm outcomes of uncemented THA using a contemporary DM cup, with no dislocations nor cup revisions due to aseptic loosening.

LEVEL OF EVIDENCE

Level IV, retrospective cohort study.

Complications following Iliac Wing Fibrosarcoma

The aim of this case report is to underline surgical strategies for complications in a case of a young man with fibrosarcoma of the bone treated with pelvic resection followed by reconstruction with massive bone allograft. A type I pelvic resection was performed as a radical resection of tumor followed by a biological reconstruction of iliac wing using frozen allograft. The iliac allograft was fixed in place using 4 screws. The immediate postoperative period was complicated with local sepsis of reconstructed site treated with pediculate omentoplasty. After 1 year from surgery, the X-ray exam showed an integrated allograft. After 20 years from the first surgery, the patient presented with the left hip pain of 3-month duration with mechanical pattern. The X-ray and CT exam showed the left hip arthritis and no signs of recurrence. A total hip arthroplasty with dual mobility cup and uncemented stem was performed. Despite the immediate postoperative local infection, the allograft was left in place and integrated after all. Omentoplasty could be a very useful technique in eradicating local infection, due to the immunogenic properties of the omentum. The allograft is still strong enough to give support for a hip arthroplasty at 20 years after implantation.

Long-term outcomes of a dual-mobility cup and cementless triple-taper femoral stem combination in total hip replacement: a multicenter retrospective analysis

BACKGROUND

The separate design concepts of dual-mobility cups and triple-taper femoral stems were developed to improve survivorship following total hip replacement (THR) by reducing instability/dislocation and enabling enhanced fixation. Successful outcomes at over two decades have been reported with earlier-generation devices based on these concepts. The current study aimed to provide the first long-term results with a unique pairing of later-generation dual-mobility cup and triple-taper cementless femoral stem after a decade of use in patients undergoing THR.

METHODS

In this retrospective analysis, records were reviewed for all subjects implanted with this dual-mobility cup/cementless femoral stem combination at three centers between 2002 and 2005. Any subject who had not already had follow-up visit beyond 10 years, was not previously revised, and still living were invited for a single follow-up visit consisting of Merle d'Aubgine Scores, the Western Ontario and McMaster Universities Osteoarthritis (WOMAC) index, and standard radiographs.

RESULTS

There were 244 THRs available for analysis. At a mean follow-up of 11.9 years, the Kaplan-Meier survivorship (endpoint: revision for any reason) was 99.1% (95% CI, 97.6-99.7) for the stem and 95.9% (95% CI, 93.1-97.6) for the cup. Merle d'Aubigne Scores were significantly improved from baseline and WOMAC scores were in the satisfactory range at the final follow-up. Radiographic analysis revealed no cases of stem subsidence, no cases of bone hypertrophy, 1 (0.4%) case of bone atrophy, and 3 (1.2%) cases of osteolysis around the stem. No subjects had radiolucent lines greater than 1 mm in any femoral Gruen zone. Evidence of cup migration was seen in 1 (0.4%) subject and 1 (0.4%) subject had evidence of osteolysis that was seen in Gruen zones I, II, IV, and V.

CONCLUSIONS

This combination of a later-generation dual-mobility cup and cementless triple-taper stem was associated with excellent survivorship and satisfactory functional outcomes at over 10 years follow-up.

TRIAL REGISTRATION

ClinicalTrials.gov, NCT02648152. Date of registration: January 6, 2016. Retrospectively registered.