What Are Risk Factors for Intraoperative Humerus Fractures During Revision Reverse Shoulder Arthroplasty and Do They Influence Outcomes?

Radiologic anatomic study of the humeral medullary canal

Hypothesis/Background

Patient-specific implants have become an increasingly researched area to improve surgical outcomes. Patient-specific implants have been suggested to provide advantages for better implant alignment and thus improve surgical outcomes. One such area for application is in the use of intramedullary nails for humeral fracture stabilization. However, the anatomy of the canal is not well defined, especially in a larger scale demographic study.

Methods

In this observational cross-sectional study, axial computed tomography scans of 150 humeri were used to measure the cortical thickness and canal width in both coronal and sagittal orientations. Measurements were made at 7 evenly spaced levels along the humerus from the surgical neck to the point immediately superior to the supracondylar ridge. X-rays were used to measure the valgus, recurvatum, and procurvatum angles, along with their associated locations. Demographic data recorded included age, gender, body mass index (BMI), race, and ethnicity.

Results

The mean coronal canal widths decreased inferiorly from the surgical neck to midshaft before increasing to the supracondylar fossa. Mean sagittal widths decreased along the complete course of the canal. The ratio of coronal to sagittal canal widths decreased from 1.09 at level 1 to 0.83 at level 5 before increasing to 1.30 at level 7. Females had significantly smaller canal widths and cortex thicknesses in both the sagittal and coronal planes throughout the course of the canal. There were no significant differences in canal widths among ethnicities. Age was positively correlated with the canal width in the coronal and sagittal orientations but was negatively correlated with cortical thickness in all 7 levels. BMI was not significantly correlated with canal width.

Conclusion/Discussion

The data included in this study may be used to determine standard widths and measurements of the humerus. However, there are notable patterns or differences in the shape of the medullary canal of the humerus between subgroups. This study is the first to conduct a larger scale demographic investigation comparing the humeral canal characteristics among sex, ethnicity, age, and BMI. These data may serve as a platform to further investigate the course of the medullary canal.

Reverse total shoulder arthroplasty with proximal bone loss: a biomechanical comparison of partially vs. fully cemented humeral stems

BACKGROUND

The appropriate amount of cementation at the time of reverse total shoulder arthroplasty with significant proximal bone loss or resection is unknown. Extensive cementation of a humeral prosthesis makes eventual revision arthroplasty more challenging, increasing the risk of periprosthetic fracture. We analyzed the degree of subsidence and torque tolerance of humeral components undergoing standard cementation technique vs. our reduced polymethyl methacrylate (PMMA) protocol. Reduced cementation may provide sufficient biomechanical stability to resist physiologically relevant loads, while still permitting a clinically attainable torque for debonding the prosthesis.

METHODS

A total of 12 cadaveric humeri (6 matched pairs) underwent resection of 5 cm of bone distal to the greater tuberosity. Each pair of humeri underwent standard humeral arthroplasty preparation followed by either cementation using a 1.5-cm PMMA sphere at a location 3 cm inferior to the porous coating or standard full stem cementation. A 6-degree-of-freedom robot was used to perform all testing. Each humeral sample underwent 200 cycles of abduction, adduction, and forward elevation while being subjected to a physiologic compression force. Next, the samples were fixed in place and subjected to an increasing torque until implant-cement separation or failure occurred. Paired t tests were used to compare mean implant subsidence vs. a predetermined 5-mm threshold, as well as removal torque in matched samples.

RESULTS

Fully and partially cemented implants subsided 0.49 mm (95% CI 0.23-0.76 mm) and 1.85 mm (95% CI 0.41-3.29 mm), respectively, which were significantly less than the predetermined 5-mm threshold (P < .001 and P < .01, respectively). Removal torque between fully cemented stems was 45.22 Nm (95% CI 21.86-68.57 Nm), vs. 9.26 Nm (95% CI 2.59-15.93 Nm) for partially cemented samples (P = .021). Every fully cemented humerus fractured during implant removal vs. only 1 in the reduced-cementation group. The mean donor age in our study was 76 years (range, 65-80 years). Only 1 matched pair of humeri belonged to a female donor with comorbid osteoporosis. The fractured humerus in the partially cemented group belonged to that donor.

CONCLUSION

Partially and fully cemented humeral prostheses had subsidence that was significantly less than 5 mm. Partially cemented stems required less removal torque for debonding of the component from the cement mantle. In all cases, removal of fully cemented stems resulted in humeral fracture. Reduced cementation of humeral prostheses may provide both sufficient biomechanical stability and ease of future component removal.

Periprosthetic proximal humerus fractures require an individualized treatment approach-results of a multicenter retrospective study

BACKGROUND

In the last years, there has been increasing use of shoulder arthroplasty. As a result, an increasing incidence of periprosthetic humerus fractures (PPHF) is expected. Therefore, this retrospective, multicenter analysis aimed to collect demographic data from patients with PPHF, their treatment strategies, and associated complications.

METHODS

Demographics of patients with PPHF were collected retrospectively from the database of six trauma hospitals between January 2000 and December 2020. All fractures were categorized according to the Wright and Cofield, and Worland classifications. In addition, the type of treatment for PPHF, as well as subsequent complications, were evaluated.

RESULTS

A total of 72 patients with a PPHF were identified. The mean age of the 55 female and 17 male patients was 77 years. PPHF occurred a mean of 50 months after primary arthroplasty implantation, almost exclusively as a result of a fall from standing height (n = 67). In-situ implant was a RTSA in 40 patients and a hemiarthroplasty in 32 patients. More than half of the fractures (n = 38) were type B fractures, according to Wright and Cofield. According to Worland, the majority of patients also had a type B fracture (type B1 (n = 22), type B2 (n = 28), type B3 (n = 10)). Associated comorbidities were found in 21 patients. A total of 31 patients were treated non-operatively, 27 with Open Reduction Internal Fixation (ORIF), and 14 with a revision arthroplasty. Nine primary radial nerve palsies were found (pre-operatively), and seven secondarily (post-operatively). Nine patients suffered from non-union (ORIF 4, non operative 4, stem replacement 1).

CONCLUSION

The treatment strategy for PPHF is primarily tailored to the individual patient. Decisive factors such as patient's age, fracture type, and primary palsies have to be considered for optimal treatment. In type B1 fractures, there is a recommendation for ORIF because of high non-union rates under non-operative treatment. In contrast, in type B2 fractures, a non-operative approach should be preferred, provided there are no radial nerve lesions.

LEVEL OF EVIDENCE

Level IV, epidemiologic study.

Challenges and Outcomes in the Management of Periprosthetic Humeral Fractures: A Retrospective Study and Review of Current Approaches

INTRODUCTION

Periprosthetic humeral fractures are a rare and increasing entity due to the rising number of shoulder arthroplasties. These fractures pose a significant challenge for surgeons, with incidence rates ranging from 1.2% to 19.4%. They can occur intraoperatively or as late complications, often influenced by trauma, prosthetic wear, or loosening.

PATIENTS AND METHODS

A retrospective study was conducted on all patients admitted with periprosthetic humeral fractures over a four-year period (2018-2022). Inclusion criteria were postoperative periprosthetic humeral fractures with a minimum follow-up of six months. Exclusion criteria included intraoperative fractures, fractures of the glenoid or coracoid process, and cases with follow-up of less than six months or incomplete data.

RESULTS

The study included six patients with an average age of 83.1 years, predominantly female (four females and two males). All fractures occurred postoperatively: four on reverse shoulder prostheses, one on an anatomical prosthesis, and one on a hemiarthroplasty. The mechanism was low-energy trauma, with fractures occurring an average of 96 months post-initial surgery. Fractures were classified using the Campbell system: three in region 4, two in region 3, and one in region 2. Radiographs showed four cemented and two uncemented stems. Three patients underwent surgical treatment with either prosthetic replacement using a long stem and fracture cerclage or locking compression plate (LCP). The remaining three patients were treated conservatively with a Sarmiento brace due to advanced age, bone fragility, low functional demand, and comorbidities. Radial nerve palsy was a complication in two patients post-trauma, with one recovering fully and the other not recovering before death due to associated complications. All fractures consolidated within an average of seven months (range: 5-8 months). Functional recovery was satisfactory with a median Constant-Murley Shoulder Score of 69 in surgically treated patients, with range of motion between 100 and 140 degrees. Only two conservatively treated patients achieved fracture consolidation, and functional recovery was inadequate.

DISCUSSION

Managing periprosthetic humeral fractures remains challenging. Treatment goals include fracture healing, maintaining prosthetic stem stability, preserving glenohumeral motion, and restoring shoulder function. Despite various classification systems, the literature shows limited and variable data on incidence and treatment outcomes. Conservative treatment may be considered for stable implants and acceptable alignment, but surgical intervention is often necessary for displaced fractures or implant loosening.

CONCLUSION

The management of periprosthetic humeral fractures requires a tailored, multidisciplinary approach to optimize outcomes and improve patient quality of life. With the increasing incidence of these fractures due to the growing use of shoulder arthroplasty, ongoing research and development of new techniques and therapeutic strategies are essential to address this clinical challenge effectively.

Global mapping of institutional and hospital-based (Level II-IV) arthroplasty registries: a scoping review

PURPOSE

Four joint arthroplasty registries (JARs) levels exist based on the recorded data type. Level I JARs are national registries that record primary data. Hospital or institutional JARs (Level II-IV) document further data (patient-reported outcomes, demographic, radiographic). A worldwide list of Level II-IV JARs must be created to effectively assess and categorize these data.

METHODS

Our study is a systematic scoping review that followed the PRISMA guidelines and included 648 studies. Based on their publications, the study aimed to map the existing Level II-IV JARs worldwide. The secondary aim was to record their lifetime, publications' number and frequency and recognise differences with national JARs.

RESULTS

One hundred five Level II-IV JARs were identified. Forty-eight hospital-based, 45 institutional, and 12 regional JARs. Fifty JARs were found in America, 39 in Europe, nine in Asia, six in Oceania and one in Africa. They have published 485 cohorts, 91 case-series, 49 case-control, nine cross-sectional studies, eight registry protocols and six randomized trials. Most cohort studies were retrospective. Twenty-three per cent of papers studied patient-reported outcomes, 21.45% surgical complications, 13.73% postoperative clinical and 5.25% radiographic outcomes, and 11.88% were survival analyses. Forty-four JARs have published only one paper. Level I JARs primarily publish implant revision risk annual reports, while Level IV JARs collect comprehensive data to conduct retrospective cohort studies.

CONCLUSIONS

This is the first study mapping all Level II-IV JARs worldwide. Most JARs are found in Europe and America, reporting on retrospective cohorts, but only a few report on studies systematically.

Cement-within-cement technique in revision reverse shoulder arthroplasty: A systematic review of biomechanical data, and clinical outcomes

Background

The purpose of this research was to systematically review and summarize the existent literature on the use of the cement-within-cement technique for revision reverse shoulder arthroplasty (RSA).

Methods

We followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The PubMed/Medline, Scopus, and EMBASE databases were searched for relevant studies. We included clinical studies in which patients underwent RSA revision using the cement-within-cement method for the humeral component, and studies that evaluated the biomechanical performance or described the surgical technique. The methodological risk of bias was assessed using the methodological index for non-randomized studies scale.

Results

The search yielded 516 records, of which two clinical and one biomechanical study met the inclusion criteria, involving 133 patients and 20 synthetic humeri. The intraoperative complication rate was 18%, all of which involved humeral fractures. The postoperative complication rate was 18% among 35 patients. The combined re-revision rate was 9%, with a reported humeral component survival rate of 100% at 2 years and 96% at 5 years. Periprosthetic fractures (1.5%) and humeral stem loosening (1.5%) led to re-revision surgeries in all cases. All studies reported improved patient-reported outcomes and range of motion. The biomechanical study demonstrated increased rotational stability in models that used larger humeral stems.

Conclusions

The cement-within-cement method is a viable option for revision RSA, showing positive outcomes in terms of stability, range of motion, and clinical functional scores. The complication rate is similar to that of other revision strategies; however, the prevalence of intraoperative humeral fractures may be higher. Nevertheless, future studies with larger sample sizes and longer follow-up periods are needed to refine patient selection, determine the efficacy of long-term use, and identify factors that may influence outcomes after the cement-within-cement revision technique. Further research on an optimized stem fixation strategy is needed to improve outcomes and reduce avoidable complications.

Level of evidence

Level IV, Systematic reviews.

Strategies to Mitigate Bleeding in Shoulder Arthroplasty in the Setting of an Arteriovenous Fistula: A Report of 3 Cases

CASE

Arteriovenous (AV) fistula in the ipsilateral extremity for hemodialysis presents unique challenges during shoulder arthroplasty. We describe 3 cases of shoulder arthroplasty performed through a deltopectoral approach on the ipsilateral side of an AV fistula. In all cases, the cephalic vein was found to be arterialized with increased diameter and thickness. All procedures were successfully performed without injury to the arterialized cephalic vein.

CONCLUSION

This report highlighted strategies to mitigate catastrophic bleeding from an arterialized cephalic vein during shoulder arthroplasty, which includes preoperative cross-matching, expeditious vascular surgery availability, meticulous surgical dissection, and careful retractor placement.

Periprosthetic fractures after shoulder arthroplasty: a systematic review

Purpose

The goal of this study was to review available literature on periprosthetic shoulder fractures to evaluate epidemiology, risk factors and support clinical decision-making regarding diagnostics, preoperative planning, and treatment options.

Methods

Two authors cross-checked the PubMed and Web of Science medical databases. The inclusion criteria were as follows: original human studies published in English, with the timeframe not limited, and the following keywords were used: 'periprosthetic shoulder fracture,' 'total shoulder arthroplasty periprosthetic fractures,' 'total shoulder arthroplasty fracture,' and 'total shoulder replacement periprosthetic fracture.' Seventy articles were included in the review. All articles were retrieved using the aforementioned criteria.

Results

The fracture rate associated with total shoulder arthroplasty varied between 0 and 47.6%. Risk factors for periprosthetic fractures were female gender, body mass index < 25 kg/m2, smoking, rheumatoid arthritis, and Parkinson's disease. The most commonly used classification is the Wright and Coefield classification. Periprosthetic fractures can be treated both, conservatively and operatively.

Conclusion

Periprosthetic fracture frequency after shoulder arthroplasty ranges from 0 to 47.6%. The most common location of the fracture is the humerus and most commonly occurs intraoperatively. The most important factor influencing treatment is stem stability. Fractures with stem instability require revision arthroplasty with stem replacement. Fractures with a stable stem depending on the location, displacement and bone stock quality can be treated both conservatively and operatively. For internal fixation plates with cables and screws are most commonly used.

Anatomic glenohumeral arthroplasty: State of the art

Anatomical total shoulder arthroplasty in its modern form where it reproduces the normal shoulder has been utilized clinically for more than half a century. As the technology and the designs have changed to recreate the humeral and glenoid sides of the joint, the sophistication of design has resulted in the growing number of cases annually worldwide. This increase is due in part to the increasing number of indications that the prosthesis can treat with successful results. On the humeral side, there have been design changes to better reflect the proximal humeral anatomy, and humeral stems are increasingly placed safely without cement. Platform systems which allow conversion of a failed arthroplasty to a reverse configuration without stem extraction is another design change. Similarly, there has been increasing utilization of short stem and stemless humeral components. Extensive experience with shorter stem and stemless devices, however, has yet to demonstrate the purported advantages of these devices, as recent studies have demonstrated equivalent blood loss, fracture rates, operative times, and outcome scores. Easier revision with these shorter stems remains to be definitively established, with only one study comparing the ease of revision between stem types. On the glenoid side, hybrid cementless glenoids, inlay glenoids, cementless all-polyethylene glenoids, and augmented glenoids have all been investigated; however, the indications for these devices remain unclear. Lastly, innovative surgical approaches to implanting shoulder arthroplasty and the use of patient specific guides and computerized planning, while interesting concepts, still await validation before they are utilized on a widespread basis. While reverse shoulder arthroplasty has been increasingly used to reconstruct the arthritic shoulder, anatomic glenohumeral replacement maintains a significant role in the armamentarium of the shoulder surgeon.

Inter-Observer and Intra-Observer Reliability Assessment of the Established Classification Systems for Periprosthetic Shoulder Fractures

This study evaluated the reliability and comprehensiveness of the Unified classification system (UCPF), Wright & Cofield, Worland and Kirchhoff classifications and related treatment recommendations for periprosthetic shoulder fractures (PPSFx). Two shoulder arthroplasty specialists (experts) and two orthopaedic residents (non-experts) assessed 20 humeral-sided and five scapula-sided cases of PPSFx. We used the unweighted Cohen's Kappa (κ) for measuring the intra-observer reliability and Krippendorff's alpha (α) for measuring the inter-observer reliability. The inter-rater reliabilities for the Wright & Cofield and Worland classifications were substantial for all groups. The expert and non-expert groups for UCPF also showed substantial inter-rater agreement. The all-rater group for the UCPF and the expert and non-expert group for the Kirchhoff classification revealed moderate inter-rater reliability. For the Kirchhoff classification, only fair inter-rater reliability was found for the non-expert group. Almost perfect intra-rater reliability was measured for all groups of the Wright & Cofield classification and the all-rater and expert groups of the UCPF. All groups of the Kirchhoff and Worland classifications and the group of non-experts for the UCPF had substantial intra-rater reliabilities. Regarding treatment recommendations, substantial inter-rater and moderate intra-rater reliabilities were found. Simple classification systems for PPSFx (Wright & Cofield, Worland) show the highest inter- and intra-observer reliability but lack comprehensiveness as they fail to describe scapula-sided fractures. The complex Kirchhoff classification shows limited reliability. The UCPF seems to offer an acceptable combination of comprehensiveness and reliability.

Evaluation and treatment of postoperative periprosthetic humeral fragility fractures

Postoperative periprosthetic humeral shaft fractures represent a growing and difficult complication to treat given the aging patient population and associated bone loss. Determining the best treatment option is multifactorial, including patient characteristics, fracture pattern, remaining bone stock, and implant stability. Possible treatment options include nonoperative management with bracing or surgical intervention. Nonoperative treatment has been shown to have higher nonunion rates, thus should only be selected for a specific patient population with minimally displaced fractures or those that are unfit for surgery. Surgical management is recommended with prosthetic loosening, fracture nonunion, or failure of nonoperative treatment. Surgical options include open reduction and internal fixation, revision arthroplasty, or hybrid fixation. Careful evaluation, decision making, and planning is required in the treatment of these fractures.

Intraoperative periprosthetic humeral fracture during reverse shoulder arthroplasty: a sequelae of prior biceps tenodesis

Intraoperative periprosthetic humeral fractures are a rare but debilitating complication of reverse shoulder arthroplasty and can occur during multiple stages of the procedure. Prior biceps tenodesis has been found to reduce cortical humeral strength and predispose the patient to humeral fracture. We present a case of a 68-year-old female with a previous history of biceps tenodesis due to an irreparable rotator cuff tear. Months later, and after symptoms persisted, a reverse shoulder arthroplasty was performed. During the surgery and while performing final reduction, a fracture line was observed involving the hole used for the previous tenodesis procedure. The fracture was repaired, and the patient reported favorable outcomes. We report several factors that might have contributed to sustenance of this intraoperative fracture including prior biceps tenodesis, use of a press fit humeral stem, and the sex of the patient.

[Revision surgery in reverse shoulder arthroplasty : Management of the most common complications]

BACKGROUND

In recent years, the number of reverse shoulder arthroplasty implantations has increased continuously and a higher number of revision surgeries due to complications can be expected in the future. Current data show a mean complication rate for RSA of around 4%. The most common complications are instability, infection, component loosening, and periprosthetic fracture.

TREATMENT OPTIONS

Revision surgery for RSA is challenging, and an individual treatment plan is necessary. For prosthetic instability, different operative or non-operative treatment options are available. Revision surgery for periprosthetic infection with replacement of the prosthesis is usually necessary for infection management. The treatment of periprosthetic fractures is based on techniques of general fracture treatment and depends on the fracture type. Knowledge of complications and risk factors may decrease complication rates in primary reverse shoulder arthroplasty in the future.

Inadvertent, intraoperative, non- to minimally displaced periprosthetic humeral shaft fractures in RTSA do not affect the clinical and radiographic short-term outcome

INTRODUCTION

Little information is available on the clinical and radiographic outcome of intraoperative, non- to minimally displaced humeral fractures that occur during implantation of a stemmed, reverse shoulder prosthesis but are only recognized on routine postoperative radiographs. The goal of this study is to report the clinical and radiographic outcome for this rarely reported fracture type.

MATERIALS AND METHODS

39 conservatively treated non- to minimally displaced intraoperative periprosthetic humeral fractures after stemmed RTSA were detected from our radiographic database between 1.1.2006 and 31.1.2018. Exclusion criteria were lack of patient consent, preoperative humeral fracture, and revision arthroplasties. Clinical (absolute and relative Constant score, the Subjective Shoulder Value) and radiographic (conventional radiographs) assessment was performed preoperatively, at 6 weeks (only radiographically) and at latest follow-up with a minimum follow-up of 2 years.

RESULTS

35 patient's with a mean age of 72 years (range 32-88, SD ± 11 years) and a mean follow-up of 53 months (range 24-124, SD ± 31) were included in the study. At latest follow-up, all clinical outcome parameters except external rotation improved significantly. A complication rate of 17% (n:6) was recorded. At 6 weeks after the index surgery, none of the radiographs showed a fracture displacement or a sintering of the stem. At latest follow-up, all fractures were healed and no stem loosening was observed in any of the shoulders.

CONCLUSIONS

Non- to minimally displaced intraoperative periprosthetic humeral fractures in RTSA have an incidence of about 5% in this series of mainly uncemented press-fit stems. They generally heal without any further treatment and are not associated with stem loosening or compromise the clinical outcome after primary RTSA. Except slight restriction in the postoperative rehabilitation protocol, no further attention or action is needed.

Intraoperative and early postoperative complications of reverse shoulder arthroplasty: A current concepts review

Background

Reverse shoulder arthroplasty is a common procedure performed for a variety of shoulder pathologies.

Aims and objectives

This current concept review evaluates the intraoperative and early postoperative complications, with a specific focus given to neurological and vascular injury, fracture, dislocation and venous thromboembolism.

Conclusion

A detailed knowledge of potential complications will allow surgeons to mitigate risk and maximise outcomes.

Pectoralis-major-pedicled bone window for revision of a shoulder arthroplasty

PURPOSE

The aim of this study is to review our experience with the pectoralis-major-pedicled bone window for the revision of shoulder arthroplasty.

METHODS

This study used the retrospective case series of six patients who underwent a pectoralis-major-pedicled bone window for revision of shoulder arthroplasty, with a minimum follow-up of 2 years. Demographic, clinical, and radiological data were analyzed.

RESULTS

The mean age of the included patients was 72.6 years old (standard deviation (SD) 4.7), and 83.3% were women (5/1). The mean follow-up was 36.6 months (range 25-48 months). Five patients had a shoulder hemiarthroplasty and one patient a reverse shoulder arthroplasty. The indications for revision were pain in five patients and recurrent dislocation in one patient. No intraoperative complications were found. One patient developed a wound infection that required debridement and a two-stage revision. Despite complications, 2 years after surgery, the range of motions and functional scores were improved from preoperative levels. The difference between preoperative and postoperative VAS pain scores was 7.1 points (p < 0.001). The difference between preoperative and postoperative CSS and ASES questionnaires were 32 and 31.6 points, respectively (p < 0.001). At the final follow-up, all radiographs showed bone union of the osteotomy, good fixation of all components, without evidence of prosthetic loosening or migration.

CONCLUSIONS

Revision of a shoulder arthroplasty using a pectoralis-major-pedicled bone window can be an effective treatment that can yield pain relief; however, improvements in motion and function were difficult to achieve.

Prospective multicentre mid-term clinical and radiological outcomes of 159 reverse total shoulder replacements and assessment of the influence of post-operative complications

BACKGROUND

The aim of our prospective multicentre study is to evaluate the five-year follow-up outcomes of primary reverse shoulder replacement utilizing two different designs of glenoid baseplates.

METHODS

There were 159 reverse shoulder replacements (91 cemented and 68 uncemented stems, 67 Trabecular Metal baseplates and 92 Anatomical Shoulder baseplates in 152 patients (99 women) with a mean age of 74.5 (58-90) years. The principal diagnosis was rotator cuff arthropathy in 108 shoulders.

RESULTS

Clinical and functional results improved significantly overall; the adjusted Constant Murley score improved from 28.2 ± 13.3 pre-operatively to 75.5 ± 22.8 (p < 0.0001) and the mean Subjective Shoulder Value improved from 27.5 ± 20 to 73.8 ± 21.3 points (p < 0.0001). Radiologically, there was good bony stability in 88% and 86% of cemented and uncemented stems without significant impact on the Constant Murley score and Subjective Shoulder Value at one, two and five years post-surgery. There were no significant clinical differences between Trabecular Metal and Anatomical Shoulder baseplates at five years. There were four cases of intraoperative shaft fractures that were managed with cables. Although the Trabecular Metal baseplates showed better integration radiologically, there was no significant difference in the mean of Constant Murley, Subjective Shoulder Value and the range of motion depending on the grade of inferior scapular notching at one-, two- and five-year intervals.

CONCLUSIONS

Reverse total shoulder arthroplasty restores the function in shoulder with significant improvements in function and moderate complications with minor differences between both designs of baseplates that were not reflected clinically.

Complications and Intraoperative Fractures in Reverse Shoulder Arthroplasty: A Systematic Review

Introduction

The reverse shoulder arthroplasty is nowadays a treatment option for a variety of shoulder problems. As its incidence rose, also the number of complications increased, including intraoperative fractures.

Significance

We performed a systematic review and critical analysis of the current literature following the PRISMA guidelines. Our purpose was to: 1) determine incidence, causes, and characteristics of intraoperative fractures; 2) evaluate their current treatment options, possible related complications, reoperation rates, and the patients’ outcome; and 3) determine the overall incidence of each complication related to reverse shoulder arthroplasty. The articles were selected from PubMed medical database in April 2020 using a comprehensive search strategy. Rayyan software was used to support the selection process of the records. A descriptive and critical analysis of the results was performed.

Results

The study group included a total of 13,513 reverse shoulder arthroplasty procedures. The total number of complications was 1647 (rate 12.1%). The most common complication was dislocation (340 cases, rate 2.5%). Forty-six studies reported a total of 188 intraoperative fractures among the complications (rate 1.4%). The intraoperative fracture rate was 2.9% and 13.6% in primary and revision settings, respectively. There were 136 humeral fractures, 60% of them occurred in revision RSAs, during the removal of the previous implant, and involved the shaft in the majority of cases (39%). Glenoid fractures were 51 and occurred mostly during the reaming of the glenoid. We observed 7 further related complications (rate of 4%) and 3 reoperations (rate of 1.5%). The outcome was satisfactory in the majority of cases.

Conclusions

A comprehensive review on intraoperative fractures in reverse shoulder arthroplasties is presented. Results suggest favorable outcomes for all treatment methods, with a modest further complication rate. This investigation may aid in the treatment decision-making for these complications.

Intraoperative fractures in shoulder arthroplasty: risk factors and outcomes

Background

The incidence of shoulder arthroplasty in the United States continues to increase, and while the risk of intraoperative complications such as fracture remains relatively low, there has been little investigation into whether certain patient-specific risk factors predispose to this complication. This study characterizes the incidence of intraoperative fracture during shoulder arthroplasty and additionally hypothesizes that certain risk factors may exist in addition to potentially leading to worsened near-term outcomes.

Methods

An institutional database of shoulder arthroplasties (N = 1773; 994 anatomic, 779 reverse) was retrospectively reviewed, and the operative reports for each case were examined for documentation of an intraoperative fracture, including during which surgical step the fracture took place. Various preoperative and intraoperative factors were tested for comparative significance (P < .05) using chi-square and Kruskal-Wallis tests as appropriate. Length of stay, 90-day readmission, and discharge to rehabilitation or skilled nursing facility (SNF) were further examined as secondary outcomes.

Results

Twenty-one (1.2%) intraoperative fractures were documented, a majority of which occurred in reverse shoulder arthroplasties compared to anatomic procedures (overall incidence: 2.5% vs. 0.2%, P < .001). These most commonly occurred during either stem broaching (33%) or seating (33%) and were most likely to involve the metaphysis (53%) or greater tuberosity (33%). Five fractures occurred during revision arthroplasty, while 16 fractures occurred during primary procedures (overall incidence: 3.0 vs. 1.0%, P = .03). Patient factors reaching statistical significance included female gender and liver disease, while age and smoking history were notably not associated with intraoperative fracture. The fracture cohort had a significantly longer mean length of stay (2.42 vs. 2.17 days, P < .001). While the rates of 90-day readmission and discharge to SNF/rehab were higher in the fracture cohort, these values did not reach statistical significance.

Conclusion

Intraoperative fractures are a rare complication (1.2%) in shoulder arthroplasty, with reverse shoulder arthroplasty, revision cases, and female gender associated with an elevated overall risk. While these patients had a longer inpatient hospitalization, the substantially higher rates of 90-day readmission and discharge to SNF/rehab did not reach significance in our limited institutional cohort. The aforementioned incidence and risk factors serve as crucial evidence for use during the preoperative counseling process with patients as part of a shared decision-making model.

Inlay total shoulder arthroplasty for primary glenohumeral arthritis

Background

Anatomic total shoulder arthroplasty with a nonspherical humeral head and inlay glenoid replacement has been introduced in the past; however, clinical evidence remains limited. We hypothesized that patients with advanced glenohumeral arthritis demonstrate significant improvements in pain and function.

Methods

Prospective patient-reported outcomes (PROs) included the American Shoulder and Elbow Surgeons score, a pain visual analog scale, and satisfaction. Range of motion was compared to the preoperative status. A sensitivity analysis examined responder rates and compared them to literature thresholds using the minimal clinically important difference and substantial clinical benefit. The preoperative glenoid morphology was determined using the Walsh classification. Zone-specific periprosthetic radiolucent lines were quantified at the last follow-up.

Results

Thirty-nine shoulders in 36 patients (3 bilateral) with a mean age of 65.9 years (26 males, 13 females) and a mean follow-up of 41.0 months were included. Ninety-three percent had grade III osteoarthritis, and 7% grade II. The glenoid Walsh classification included A1 (25%), A2 (25%), B1 (22%), B2 (25%), and C (3%). All PROs improved significantly (P < .001) with a mean American Shoulder and Elbow Surgeons score from 30.4 to 77.1, a pain visual analog scale from 8.1 to 1.5, and excellent (9.1/10) patient satisfaction. PRO-related responder rates for minimal clinically important difference and substantial clinical benefit were ≥85%. Forward elevation improved from 107° to 155°, and external rotation from 22° to 51°. One intraoperative glenoid rim fracture led to advanced radiolucency; no other clinically relevant lucency was observed.

Conclusion

Treatment with inlay total shoulder arthroplasty demonstrated significant functional improvement, excellent pain relief, and patient satisfaction in patients with advanced shoulder arthritis and various glenoid morphology types. Our initial results provide further support for this new option in primary shoulder replacement.

Mechanical complications and fractures after reverse shoulder arthroplasty related to different design types and their rates: part I

The initial reverse shoulder arthroplasty (RSA), designed by Paul Grammont, was intended to treat rotator cuff tear arthropathy in elderly patients. In the early experience, high complication rates (up to 24%) and revision rates (up to 50%) were reported.The most common complications reported were scapular notching, whereas clinically more relevant complications such as instability and acromial fractures were less commonly described.Zumstein et al defined a 'complication' following RSA as any intraoperative or postoperative event that was likely to have a negative influence on the patient's final outcome.High rates of complications related to the Grammont RSA design led to development of non-Grammont designs, with 135 or 145 degrees of humeral inclination, multiple options for glenosphere size and eccentricity, improved baseplate fixation which facilitated glenoid-sided lateralization, and the option of humeral-sided lateralization.Improved implant characteristics combined with surgeon experience led to a dramatic fall in the majority of complications. However, we still lack a suitable solution for several complications, such as acromial stress fracture. Cite this article: EFORT Open Rev 2021;6:1097-1108. DOI: 10.1302/2058-5241.6.210039.

Biomechanical Value of a Protective Proximal Humeral Cerclage in Reverse Total Shoulder Arthroplasty

Reverse shoulder arthroplasty (RSA) is a commonly performed salvage procedure for failed proximal humeral fracture fixation. The rate of intraoperative periprosthetic fractures is higher compared to primary RSA. The goal of this study was to investigate the biomechanical value of a protective cerclage during stem impaction in a revision surgery setting. Twenty-eight fresh-frozen human humeri were used to assess different configurations for steel wire and FiberTape cerclages. A custom-built biomechanical test setup simulated the mallet strikes during the stem impaction process with the Univers Revers prothesis stem. The mallet energy until the occurrence of a first crack was not different between groups. The total energy until progression of the fracture distally to the cerclage was significantly higher in the cerclage groups compared to the native humerus (9.5 J vs. 3.5 J, respectively; p = 0.0125). There was no difference between the steel wire and FiberTape groups (11.4 J vs. 8.6 J, respectively; p = 0.2695). All fractures were located at the concave side of the stem at the metaphyseal calcar region. This study demonstrates that a protective cerclage can successfully delay the occurrence of a fracture during stem impaction in reverse shoulder arthroplasty. A FiberTape cerclage is biomechanically equally efficient compared to a steel wire cerclage.

Intermediate to long term results of stemless metaphyseal reverse shoulder arthroplasty: A five to nine year follow-up

BACKGROUND

Shoulder arthroplasty incidence is increasing as is the volume of revision surgeries. Revision surgery is easier if humeral bone stock is preserved with minimal bone defects and osteolysis. This has led to an increased focus on the development of various short stemmed and stemless implants which provides stable fixation whilst preserving humeral bone stock.

PURPOSE

To review the medium to long term clinical and radiological outcomes, complications and survival rates of a stemless reverse shoulder prosthesis.

PATIENTS AND METHOD

Patients with a minimum follow-up of 60 months following a reverse stemless shoulder arthroplasty were deemed eligible. Clinical and radiological data on twenty-one patients operated between 2009 and 2014 were recorded prospectively. Survivorship and patient recorded symptoms with the end point of revision surgery were recorded.

RESULTS

Mean follow-up of 78 months (60-114 months). Mean range of active elevation was 136° (80-170°). Mean range of active abduction and active external rotation was 122° (70-170°) and 47° (10-75°) respectively. Mean Oxford score improved from 12 pre-operatively to 44 at final follow up (p < 0.0001). Mean Constant Murley Score improved from 18 to 72 (p < 0.0001). Mean ADLEIR score of 13 pre-operatively increased to 32 post-operatively (p < 0.0001). Notching was seen in 23.5% of cases and no radiolucent areas were observed around the glenoid component. There were two cases of post traumatic peri-prosthetic fractures that were managed conservatively and one case of deep-seated infection that required a washout. The survivorship at the most recent follow-up was 100%.

CONCLUSION

The advantages of bone preservation with the stemless metaphyseal prosthesis combined with encouraging medium to long term clinical and radiological results are very promising, particularly with the improved post-operative patient satisfaction scores. This is the first study that reports the results with a minimum of 5 year follow-up and has the longest mean follow-up period.

CLINICAL RELEVANCE

The reverse stemless shoulder prosthesis is an effective and reliable option for elective shoulder arthroplasty.

Complications of Superior Capsule Reconstruction for the Treatment of Functionally Irreparable Rotator Cuff Tears: A Systematic Review

PURPOSE

The purpose of this systematic review is to characterize the complications associated with superior capsule reconstruction (SCR) for the treatment of functionally irreparable rotator cuff tears (FIRCTs).

METHODS

This systematic review was completed in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses. Two independent reviewers completed a search of PubMed, Embase, and Medline databases. Studies were deemed eligible for inclusion if they reported postoperative outcomes of arthroscopic SCR for FIRCTs and considered at least 1 postoperative complication. Statistical heterogeneity was quantified via the I² statistic. Due to marked heterogeneity, pooled proportions were not reported. All complications and patient-reported outcomes were described qualitatively.

RESULTS

Fourteen studies met the inclusion/exclusion criteria. The overall complication rate post-SCR ranged from 5.0% to 70.0% (I² = 84.9%). Image-verified graft retear ranged from 8% to 70%, I² = 79.4%), with higher rates reported when SCR was performed using allograft (19%-70%, I² 76.6%) compared to autograft (8%-29%, I² = 66.1%). Reoperation (0%-36%, I² = 73.4%), revision surgeries (0%-21%, I² = 81.2%), medical complications (0%-5%, I² = 0.0%), and infections (0%-5%, I² = 0.0%) were also calculated.

CONCLUSIONS

SCR carries a distinct complication profile when used for the treatment of FIRCTs. The overall rate of complications ranged from 5.0% to 70.0%. The most common complication is graft retear with higher ranges in allografts (19%-70%) compared to autografts (8%-29%). The majority of studies reported at least 1 reoperation (range, 0%-36%), most commonly for revision to reverse shoulder arthroplasty.

LEVEL OF EVIDENCE

Level IV, systematic review of Level IV or better investigations.

Outcome and complications following revision shoulder arthroplasty : a systematic review and meta-analysis

AIMS

It is important to understand the rate of complications associated with the increasing burden of revision shoulder arthroplasty. Currently, this has not been well quantified. This review aims to address that deficiency with a focus on complication and reoperation rates, shoulder outcome scores, and comparison of anatomical and reverse prostheses when used in revision surgery.

METHODS

A Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) systematic review was performed to identify clinical data for patients undergoing revision shoulder arthroplasty. Data were extracted from the literature and pooled for analysis. Complication and reoperation rates were analyzed using a meta-analysis of proportion, and continuous variables underwent comparative subgroup analysis.

RESULTS

A total of 112 studies (5,379 shoulders) were eligible for inclusion, although complete clinical data was not ubiquitous. Indications for revision included component loosening 20% (601/3,041), instability 19% (577/3,041), rotator cuff failure 17% (528/3,041), and infection 16% (490/3,041). Intraoperative complication and postoperative complication and reoperation rates were 8% (230/2,915), 22% (825/3,843), and 13% (584/3,843) respectively. Intraoperative and postoperative complications included iatrogenic humeral fractures (91/230, 40%) and instability (215/825, 26%). Revision to reverse total shoulder arthroplasty (TSA), rather than revision to anatomical TSA from any index prosthesis, resulted in lower complication rates and superior Constant scores, although there was no difference in American Shoulder and Elbow Surgeons scores.

CONCLUSION

Satisfactory improvement in patient-reported outcome measures are reported following revision shoulder arthroplasty; however, revision surgery is associated with high complication rates and better outcomes may be evident following revision to reverse TSA. Cite this article: Bone Jt Open 2021;2(8):618-630.

Is suture cerclage fixation a valid treatment for intraoperative nondisplaced calcar fractures in reverse total shoulder arthroplasties?

Background

Implantation rates of reverse total shoulder arthroplasties continue to grow worldwide. Despite satisfying results, a distinct number of complications persist. Intraoperative fractures of the humeral shaft might occur in a certain number of cases. The literature is sparse regarding incidence and treatment options. This study analyzed the treatment using suture cerclage or stainless-steel-cable cerclage.

Methods

Our prospectively followed-up cohort of 860 patients who received primary reverse total shoulder arthroplasty in a tertiary referral hospital between September 2005 and August 2018 was screened for intraoperative medial humeral calcar fractures. The patients were retrospectively analyzed as per the treatment algorithm using (1) suture cerclage with FiberWire, (2) cable cerclage with stainless steel cable, or (3) no intervention. The outcome was radiologically and clinically (Subjective Shoulder Value and Constant score) evaluated.

Results

A total of 39 (4.5%) intraoperative calcar fractures of the humeral shaft were identified with 29 cases available for analysis at a mean follow-up time of 52 ± 27 months. Sixteen of them were treated with suture cerclage, 7 with metal cable cerclage, and 6 without intervention. All fractures were nondisplaced or could be reduced anatomically and healed without any stem subsidence or loosening within the first 4.5 months. The intervention groups reached similar values for the Subjective Shoulder Value (68%±27% vs. 79%±19%, suture vs. cable) and relative Constant score (65 % ± 25 % vs. 75 % ± 23).

Conclusion

Intraoperative medial calcar fractures can be sufficiently treated with metal or suture cerclage fixation. High-strength polyblend-polyethylene sutures seem to be a valid therapeutic option for selected medial calcar fractures of the humerus. In selected cases, however, benign neglect can result in excellent results as well.

A Tensionable Suture-based Cerclage Is an Alternative to Stainless Steel Cerclage Fixation for Stabilization of a Humeral Osteotomy During Shoulder Arthroplasty

INTRODUCTION

Fixation of periprosthetic humeral fractures is most commonly obtained with steel-based wires or cables; however, disadvantages with these constructs are numerous. Suture-based cerclages offer the advantage of easy handling, less radiographic interference, and risk of metallosis, as well as decreased risk of cutting into the soft humeral bone. Therefore, the purpose of this study was to compare a suture-based cerclage to a stainless steel wire cerclage (SSWC) for stabilization of the humerus during shoulder arthroplasty.

METHODS

In part I of the study, SSWC fixation was compared with single-looped tape cerclage and a double-looped tape cerclage (DLTC) fixation. In part II, a subsidence test was performed on 12 cadaveric humeri. After an osteotomy, the humeri were secured with either a SSWC or DLTC. Subsequently, a metal wedge was introduced into the humerus to simulate the stem of a shoulder arthroplasty.

RESULTS

In part I, load to 2-mm displacement was significantly higher for the DLTC construct compared with the SSWC construct (2,401 ± 483 N versus 750 ± 33 N; P < 0.0001). Load to failure was 935 ± 143 N with the SSWC, 1,737 ± 113 N with the single-looped tape cerclage, and 4,360 ± 463 N with the DLTC constructs, and all differences were statistically significant (P < 0.05). In part II, load at 20-mm subsidence was higher for the DLTC (320 ± 274 N) compared with the SSWC (247 ± 137 N), but no significant difference was observed (P > 0.05). However, gap displacement at 20 mm subsidence was significantly lower with the DLTC construct (0.33 ± 0.31 mm versus 0.77 ± 0.23 mm; P = 0.009). Load to failure was higher with the DLTC construct compared with the SSWC construct (4,447 ± 2,325 N versus 1,880 ± 1,089 N; P = 0.032), but the final gap displacement did not differ significantly (DLTC 5.23 ± 6.63 mm versus SSWC 6.03 ± 8.82 mm; P > 0.05).

DISCUSSION

A DLTC has higher load to failure and trends toward lower gap displacement compared with a SSWC. The DLTC construct may therefore be a viable alternative for fixation of periprosthetic fractures or osteotomies of the humeral shaft during shoulder arthroplasty.

Revision Reverse Shoulder Arthroplasty for Anatomical Glenoid Component Loosening Was Not Universally Successful: A Detailed Analysis of 127 Consecutive Shoulders

BACKGROUND

Glenoid component loosening is a primary cause of failure of anatomical total shoulder arthroplasty (TSA) and is commonly associated with glenoid bone loss. The purpose of the present study was to evaluate the outcome and survival following revision to a reverse total shoulder arthroplasty (RSA) for the treatment of loosening of a polyethylene cemented glenoid component in the setting of failed TSA.

METHODS

Between 2010 and 2017, 151 shoulders underwent revision to RSA for the treatment of loosening of an anatomical polyethylene glenoid component. Shoulders with staged reconstruction for the treatment of infection were excluded. One hundred and twenty-seven patients (67 women and 60 men) had a single-stage reconstruction and were available for follow-up. The mean age at the time of surgery was 70 years (range, 41 to 93 years). In all cases, the humeral component was revised and a standard glenoid baseplate was utilized. Bone graft was used at the discretion of the treating surgeon. Medical records and radiographs were reviewed to collect demographic, intraoperative, and postoperative data; to quantify glenoid bone loss; and to determine the radiographic outcome. The mean duration of follow-up was 35 months (range, 24 to 84 months).

RESULTS

Revision to RSA resulted in significant improvements in terms of pain and motion. Sixteen shoulders (13%) underwent revision surgery for the treatment of baseplate loosening. Radiographic baseplate loosening was present in 6 additional shoulders (overall rate of baseplate loosening, 17%). Intraoperative fracture or fragmentation of the greater tuberosity occurred in 30 shoulders (24%). Other reoperations included resection for deep infection (3 shoulders), arthroscopic biopsies for unexplained persistent pain (2 shoulders), humeral tray exchange for dislocation (2 shoulders), revision for humeral loosening (1 shoulder), irrigation and debridement for hematoma (1 shoulder), and internal fixation of periprosthetic fracture (1 shoulder) (overall reoperation rate, 20%). Among shoulders with surviving implants at the time of the most recent follow-up, pain was rated as none or mild in 83 shoulders (65.4%) and the average active elevation and external rotation were 132° and 38°, respectively. With the numbers available, no risk factors for failure could be identified.

CONCLUSIONS

Revision RSA for the treatment of loosening of an anatomical polyethylene component was associated with a 17% glenoid mechanical failure rate. Although this procedure resulted in improvements in terms of pain and function, it was not universally successful and thus needs further refinement in order to improve outcomes.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Biomechanical Assessment of Three Osteosynthesis Constructs by Periprosthetic Humerus Fractures

Background

Biomechanical stability assessment of 3 different constructs for proximal fixation of a locking compression plate (LCP) in treating a Worland type C periprosthetic fracture after total shoulder arthroplasty.

Methods

27 Worland type C fractures after shoulder arthroplasty in synthetic humeri were treated with 14-hole LCP that is proximally fixed using the following: (1) 1 × 1.5 mm cerclage wires and 2x unicortical-locking screws, (2) 3 × 1.5 mm cerclage wires, or (3) 2x bicortical-locking attachment plates. Torsional stiffness was assessed by applying an internal rotation moment of 5 Nm and then after unloading the specimen, an external rotation moment of 5 Nm at the same rate was applied. Axial stiffness was assessed by applying a 50 N preload, and then applying a cyclic load of 250 N, then increasing the load by 50 N each time, until a maximum axial load of 2500 N was reached or specimen failure occurred.

Results

With regard to internal as well as external rotational stiffness, group 1 showed a mean stiffness of 0.37 Nm/deg and 0.57 Nm/deg, respectively, group 2 had a mean stiffness of 0.51 Nm/deg and 0.39 Nm/deg, respectively, while group 3 had a mean stiffness of 1.34 Nm/deg and 1.31 Nm/deg, respectively. Concerning axial stiffness, group 1 showed an average stiffness of 451.0 N/mm, group 2 had a mean stiffness of 737.5 N/mm, whereas group 3 had a mean stiffness of 715.8 N/mm.

Conclusion

Group 3 displayed a significantly higher torsional stiffness while a comparable axial stiffness to group 2.

The modern reverse shoulder arthroplasty and an updated systematic review for each complication: part II

Background

Globally, reverse shoulder arthroplasty (RSA) has moved away from the Grammont design to modern prosthesis designs. The purpose of this study was to provide a focused, updated systematic review for each of the most common complications of RSA by limiting each search to publications after 2010. In this part II, the following were examined: (1) instability, (2) humerus/glenoid fracture, (3) acromial/scapular spine fractures (AF/SSF), and (4) problems/miscellaneous.

Methods

Four separate PubMed database searches were performed following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Overall, 137 studies for instability, 94 for humerus/glenoid fracture, 120 for AF/SSF, and 74 for problems/miscellaneous were included in each review, respectively. Univariate analysis was performed with chi-square and Fisher exact tests.

Results

The Grammont design had a higher instability rate vs. all other designs combined (4.0%, 1.3%; P < .001), and the onlay humerus design had a lower rate than the lateralized glenoid design (0.9%, 2.0%; P = .02). The rate for intraoperative humerus fracture was 1.8%; intraoperative glenoid fracture, 0.3%; postoperative humerus fracture, 1.2%; and postoperative glenoid fracture, 0.1%. The rate of AF/SSF was 2.6% (371/14235). The rate for complex regional pain syndrome was 0.4%; deltoid injury, 0.1%; hematoma, 0.3%; and heterotopic ossification, 0.8%.

Conclusions

Focused systematic reviews of recent literature with a large volume of shoulders demonstrate that using non-Grammont modern prosthesis designs, complications including instability, intraoperative humerus and glenoid fractures, and hematoma are significantly reduced compared with previous studies. As the indications continue to expand for RSA, it is imperative to accurately track the rate and types of complications in order to justify its cost and increased indications.

The modern reverse shoulder arthroplasty and an updated systematic review for each complication: part I

Background

Globally, reverse shoulder arthroplasty (RSA) has moved away from the Grammont design to modern prosthesis designs. The purpose of this 2-part study was to systematically review each of the most common complications of RSA, limiting each search to publications in 2010 or later. In this part (part I), we examined (1) scapular notching (SN), (2) periprosthetic infection (PJI), (3) mechanical failure (glenoid or humeral component), and (4) neurologic injury (NI).

Methods

Four separate PubMed database searches were performed following Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines. Overall, 113 studies on SN, 62 on PJI, 34 on mechanical failure, and 48 on NI were included in our reviews. Univariate analysis was performed with the χ² or Fisher exact test.

Results

The Grammont design had a higher SN rate vs. all other designs combined (42.5% vs. 12.3%, P < .001). The onlay humeral design had a lower rate than the lateralized glenoid design (10.5% vs. 14.8%, P < .001). The PJI rate was 2.4% for primary RSA and 2.6% for revision RSA. The incidence of glenoid and humeral component loosening was 2.3% and 1.4%, respectively. The Grammont design had an increased NI rate vs. all other designs combined (0.9% vs. 0.1%, P = .04).

Conclusions

Focused systematic reviews of the recent literature with a large volume of RSAs demonstrate that with the use of non-Grammont modern prosthesis designs, complications including SN, PJI, glenoid component loosening, and NI are significantly reduced compared with previous studies. As the indications for RSA continue to expand, it is imperative to accurately track the rates and types of complications to justify its cost and increased indications.

Optimizing humeral stem fixation in revision reverse shoulder arthroplasty with the cement-within-cement technique

BACKGROUND

The purpose of this study was to report on the clinical outcomes of patients undergoing revision reverse shoulder arthroplasty (RSA) by the cement-within-cement technique, as well as to identify whether surgical technique can affect subsequent humeral loosening.

METHODS

In 98 patients, cemented humeral components that were revised to RSA using the cement-within-cement technique were identified and included in this study. We compared 8 patients in whom humeral stem loosening developed with 90 patients whose stem remained fixed. Preoperative and postoperative radiographs of each patient were downloaded in DICOM (Digital Imaging and Communications in Medicine) format and analyzed in Mimics. The total area of the cement mantle (in square millimeters) and of the stem (in square millimeters), as visualized on 2-dimensional plain films, was measured in each subject on both preoperative and postoperative radiographs. Outcomes at a minimum of 2 years of follow-up were analyzed.

RESULTS

Clinical outcomes were available in 57 patients, with a mean follow-up period of 54 months (range, 21-156 months). Patients demonstrated significantly improved functional outcome scores and shoulder range of motion. In the group without loosening, the mean increase in the cement mantle area was 4380 ± 12701 mm² (P < .0001). In the group with loosening, the mean increase in the cement mantle area was only 811 ± 4014 mm² (P = .484).

CONCLUSIONS

Use of the cement-within-cement technique for fixation of the humeral component in revision RSA is effective in improving functional outcome scores and shoulder range of motion. Furthermore, these findings suggest that efforts to maximize the cement volume during reimplantation may lessen the chance of humeral stem loosening requiring additional revision.

Periprosthetic Fractures in Reverse Total Shoulder Arthroplasty: Current Concepts and Advances in Management

PURPOSE OF REVIEW

Expanded indications for reverse total shoulder arthroplasty (RSA) have raised awareness of associated complications, including periprosthetic fractures. The purpose of this article was to provide a comprehensive update on how, when, and why RSA-related periprosthetic fractures occur, as well as to describe the current treatment strategies.

RECENT FINDINGS

Periprosthetic acromial and scapular spine fractures occur in up to 4.3% of cases and periprosthetic humeral fractures occur in approximately 3.5% of RSA procedures. Fractures of the coracoid process and clavicle have also been reported. Current literature has identified several risk factors for intraoperative or postoperative fracture, including underlying osteoporosis, revision arthroplasty, use of a superiorly placed screw during metaglene fixation, and disruption of the scapular ring by transection of the coracoacromial ligament. Periprosthetic fracture associated with RSA is a clinically significant event that warrants prolonged postoperative vigilance, timely diagnosis, and shared patient decision-making regarding treatment. Further research is needed to identify optimal treatment strategies and characterize long-term clinical outcomes following RSA-related periprosthetic fracture.

Initial stability of a percutaneous osseointegrated endoprosthesis with proximal interlocking screws for transhumeral amputees

BACKGROUND

Percutaneous osseointegrated devices for skeletal fixation of prosthetic limbs have the potential to improve clinical outcomes in the transhumeral amputee population. Initial endoprosthesis stability is paramount for long-term osseointegration and safe clinical introduction of this technology. We evaluated an endoprosthetic design featuring a distally porous coated titanium stem with proximal slots for placement of bicortical interlocking screws.

METHODS

Yield load, ultimate failure load, and construct stiffness were measured in 18 pairs of fresh-frozen and thawed cadaver humeri, at distal and proximal amputation levels, without and with screws, under axial pull-out, torsion, and bending loads. Paired statistical comparisons were performed without screws at the two resection levels, and at distal and proximal levels with and without screws.

FINDINGS

Without screws, the location of the amputation influenced the stability only in torsional yield (p = 0.032) and torsional ultimate failure (p = 0.033). Proximally, the torsional yield and the torsional ultimate failure were 44% and 47% of that distally. Screws improved stability. In axial pull-out, screws increased the distal ultimate failure 3.2 times (p = 0.003). In torsion, screws increased the yield at the proximal level 1.9 times (p = 0.035), distal ultimate failure load 3.3 times (p = 0.016) and proximal ultimate failure 6.4 times (p = 0.013). In bending, screws increased ultimate failure at the proximal level 1.6 times (p = 0.026).

INTERPRETATION

Proximal slots and bicortical interlocking screws may find application in percutaneous osseointegrated devices for patients with amputations, especially in the less stable proximal bone of a short residual limb.

Risk factors for and timing of adverse events after revision total shoulder arthroplasty

BACKGROUND

Despite increasing rates of revision total shoulder arthroplasty (RTSA), there is a paucity of literature on optimizing perioperative outcomes. The purposes of this study were to identify risk factors for unplanned readmission and perioperative complications following RTSA, risk-stratify patients based on these risk factors, and assess timing of complications.

METHODS

Bivariate and multivariate analyses of risk factors were assessed on RTSA patients from the ACS-NSQIP database from 2011 to 2015. Patients were risk-stratified and timing of severe adverse events and cause of readmission were evaluated.

RESULTS

Of 809 RTSA patients, 61 suffered a perioperative complication or readmission within 30 days of discharge. Multivariate analysis identified operative time, BMI > 40, infection etiology, high white blood cell count, and low hematocrit as significant independent risk factors for 30-day complications or readmission after RTSA (p ≤ 0.05). Having at least one significant risk factor was associated with 2.71 times risk of complication or readmission within 15 days compared to having no risk factors (p < 0.001). The majority of unplanned readmission, return to the operating room, open/deep wound infection, and sepsis/septic shock occurred within two weeks of RTSA.

DISCUSSION

Patients at high risk of complications and readmission after RTSA should be identified and optimized preoperatively to improve outcomes and lower costs.

Arthroscopic Superior Capsular Reconstruction for Massive, Irreparable Rotator Cuff Tears: A Systematic Review of Modern Literature

PURPOSE

To systematically review and evaluate the efficacy and complication profile of superior capsular reconstruction (SCR) as a technique to address massive, irreparable rotator cuff tears (MIRCTs).

METHODS

Searches of the Cochrane Database of Systematic Reviews, Embase, MEDLINE, PubMed, and conference abstracts of 4 major conferences identified clinical studies addressing SCR for MIRCTs. Two reviewers independently screened the titles, abstracts, and full texts, extracting data from eligible studies. Reported outcome measures and complications were descriptively analyzed.

RESULTS

A total of 10 studies, 7 full texts and 3 conference abstracts, satisfied the inclusion criteria. The included studies examined a total of 350 shoulders with a mean patient age of 60.6 years and mean follow-up period of 20.6 months postoperatively. Only 4 studies had a minimum of 24-month follow-up data. Statistically significant improvements in pain and function were noted in all studies reporting results, with mean improvement ranging from 29.4 to 68.5 and from 2.5 to 5.9 points across the American Shoulder and Elbow Surgeons score and visual analog scale score, respectively. Mean improvement in range of motion ranged from 21.7° to 64.0° in elevation and from 9.0° to 15.0° in external rotation. Statistically significant improvements in the postoperative acromiohumeral distance were noted in 4 of 5 reporting studies, with a mean increase ranging from 2.2 to 5.0 mm. The combined clinical and radiographic failure and/or retear rate ranged from 3.4% to 36.1%. Complications for all studies included deep infection (0%-2%), symptomatic suture anchor loosening (0%-4%), and severe shoulder contracture (0%-2%).

CONCLUSIONS

Arthroscopic SCR represents an accepted surgical option for patients with MIRCTs, with short-term improvements shown in pain, range of motion, and function. Although early results are promising, further studies are necessary to determine the long-term success of this technique and to better delineate the clinical indications, survivorship, and risk factors for failure in this population.

LEVEL OF EVIDENCE

Level IV, systematic review of Level III and IV studies.

Management of the Failed Arthroplasty for Proximal Humerus Fracture

A variety of reasons exist for failure of arthroplasty performed for management of proximal humerus fracture. Revision surgery for these failures is complex and has a high likelihood of inferior outcomes compared with primary arthroplasty. Successful management requires consideration of various modes of failure including tuberosity malunion or resorption, rotator cuff deficiency, glenoid arthritis, bone loss, component loosening, stiffness, or infection. Although revision to a reverse shoulder arthroplasty is an appealing option to address instability, rotator cuff dysfunction, and glenoid arthritis, there are concerns with higher complication rates and inferior results compared with primary reverse replacement. Any treatment plan should appropriately address the cause for failure to optimize outcomes.

Can a reverse shoulder arthroplasty be used to revise a failed primary reverse shoulder arthroplasty?: Revision reverse shoulder arthroplasty for failed reverse prosthesis

AIMS

Patients with a failed reverse shoulder arthroplasty (RSA) have limited salvage options. The aim of this study was to determine the outcome of revision RSA when used as a salvage procedure for a failed primary RSA.

PATIENTS AND METHODS

We reviewed all revision RSAs performed for a failed primary RSA between 2006 and 2012, excluding patients with a follow-up of less than two years. A total of 27 revision RSAs were included in the study. The mean age of the patients at the time of revision was 70 years (58 to 82). Of the 27 patients, 14 (52% were female). The mean follow-up was 4.4 years (2 to 10).

RESULTS

Six patients (22%) developed complications requiring further revision surgery, at a mean of 1.7 years (0.1 to 5.3) postoperatively. The indication for further revision was dislocation in two, glenoid loosening in one, fracture of the humeral component in one, disassociation of the glenosphere in one, and infection in one. The five-year survival free of further revision was 85%. Five additional RSAs developed complications that did not need surgery, including dislocation in three and periprosthetic fracture in two. Overall, patients who did not require further revision had excellent pain relief, and significant improvements in elevation and external rotation of the shoulder (p < 0.01). The mean postoperative American Shoulder and Elbow Surgeons (ASES), and simple shoulder test (SST) scores were 66 and 7, respectively. Radiological results were available in 26 patients (96.3%) at a mean of 4.3 years (1.5 to 9.5). At the most recent follow-up, six patients (23%) had glenoid lucency, which were classified as grade III or higher in three (12%). Smokers had a significantly increased risk of glenoid lucency (p < 0.01).

CONCLUSION

Revision RSA, when used to salvage a failed primary RSA, can be a successful procedure. At intermediate follow-up, survival rates are reasonable, but dislocation and glenoid lucency remain a concern, particularly in smokers. Cite this article: Bone Joint J 2018;100-B:1493-98.

[Prosthesis replacement in periprosthetic humeral fractures]

OBJECTIVE

Stabilization of the humerus with preservation or restoration of the shoulder function.

INDICATIONS

Always in the presence of a loose prosthesis. It may become necessary in conditions of poor bone stock and if osteosynthesis is not possible.

CONTRAINDICATIONS

Noncompliant patients due to alcohol or drugs. Local infections.

SURGICAL TECHNIQUE

The loose implant is removed using an extended anterior deltopectoral approach. After exploration of the fracture and extended soft tissue release, the glenoidal components are implanted with visualization and protection of the axillary nerve. A long stemmed implant is typically needed on the humeral side. It is anchored in the distal fragment over a length of about 6 cm. Soft tissue tension is crucial, especially with reverse shoulder arthroplasty.

POSTOPERATIVE MANAGEMENT

Postoperatively, the affected limb is immobilized for 6 weeks on a 15° shoulder abduction pillow with active assisted movement therapy up to the horizontal plane. This is followed by gradual pain-adapted increases of movement, muscle coordination, and strength.

RESULTS

In 17 patients with periprosthetic fractures of the humerus surgically treated in our institution, 4 underwent revision arthroplasty because of a loose prosthesis. No intra- or postoperative complications were observed. All fractures healed except one.

Use of a shorter humeral stem in revision reverse shoulder arthroplasty

BACKGROUND

The purpose of this study was to examine the outcomes of revision reverse arthroplasty using short bone-preserving humeral components in revising a long-stemmed component.

METHODS

During a 7-year period, 39 patients who underwent revision reverse shoulder arthroplasty using the long to short humeral component technique were included. The mean age was 72 years. Prior implants used in the primary setting included anatomic (n = 26), hemiarthroplasty (n = 11), and reverse (n = 2).

RESULTS

At a follow-up of 3 years (2-5), 5 shoulders (13%) required revision surgery, including 1 for a periprosthetic humerus fracture and 4 for glenoid component loosening. The survival free of revision for any reason and revision for humeral disease was 84% and 94%, respectively. One patient experienced a nondisplaced greater tuberosity fracture at 18 months postoperatively that healed without operative intervention. There were no dislocations or infections. Overall, patients experienced excellent overall improvements in their pain levels and shoulder motion (P < .001), with a postoperative 91% satisfaction rate as well as postoperative American Shoulder and Elbow Surgeons score of 68 and Simple Shoulder Test score of 6.7. At most recent radiographic follow-up, 1 (5%) patient had grade 3 humeral lucency.

CONCLUSIONS

Preserving bone stock through conversion to a shorter reverse humeral stem in the revision setting is a reasonable option with good short- to intermediate-term results and low rates of humeral complications. Using the shorter stem components provides adequate stability and high rates of humeral component ingrowth.

Cement-within-cement technique in revision reverse shoulder arthroplasty

BACKGROUND

The purpose of this study was to determine the complications and results of cement-within cement-humeral fixation in revision reverse shoulder arthroplasty.

METHODS

In 38 shoulders, a cemented humeral component was revised to a cemented reverse humeral component using a cement-within-cement technique. The mean follow-up time was 3.7 (2.0-7.0) years. Clinical, radiologic, and hard outcomes were assessed using the Kaplan-Meier survival method, Fisher exact test, and Student t-test.

RESULTS

The average operative time for the cement-within-cement technique was 153 minutes. There were 7 (18%) nondisplaced intraoperative fractures involving the greater tuberosity that occurred on implant removal; all healed at last follow-up. A second revision surgery was performed in 3 (8%) patients who underwent cement-in-cement humeral component revision for glenoid loosening (n = 1), periprosthetic instability associated with glenoid loosening (n = 1), and periprosthetic humerus fracture (n = 1). The overall implant revision-free survival at 2 and 5 years was 95% and 91%, respectively. Patients experienced significant pain relief, improvements in their shoulder range of motion, and high satisfaction. There was 1 "at-risk" humeral component (grade 4 or higher humeral lucency, moderate subsidence) that did not undergo revision surgery. There were 2 other humeral components with grade 3 humeral lucency, no subsidence.

CONCLUSIONS

Cement-within-cement fixation of the humeral component in revision reverse shoulder arthroplasty is associated with a reasonable operative time, good medium-term survival rates, and good pain relief and functional outcomes with low complications. This technique is an important consideration to preserve humeral bone stock and potentially humeral component and implant stability.

Intraoperative complications during revision shoulder arthroplasty: a study using the National Joint Registry dataset

BACKGROUND

The surgical options for revision shoulder arthroplasty and the number of procedures performed are increasing. However, little is known about the risk factors for intraoperative complications associated with this complex surgery.

METHODS

The National Joint Registry (NJR) is a surgeon reported database recording information on major joint replacements including revision shoulder arthroplasty. Using multivariable binary logistic regression modelling, we analyzed 1445 revision shoulder arthroplasties reported to the NJR between April 2012 and 2015.

RESULTS

The risk of developing a complication during revision surgery was greater than primary arthroplasty (5% versus 2.5%). An intraoperative fracture was the most common complication occurring in 50 (3.5%) cases. Nerve injuries were recorded for two (0.1%) patients and vascular injuries for one (0.1%) patient. The incidence of intraoperative fractures was higher in females than males (relative risk = 3.25; p = 0.005). Periprosthetic fracture as an indication for revision carried the highest risk for any complication (relative risk = 3.00, p = 0.06).

CONCLUSIONS

This is the largest registry study to date investigating the incidence and risk factors for intraoperative complications during revision shoulder arthroplasty. Females have over three times the risk of intraoperative fractures compared to males. This study will help inform surgeons to accurately counsel patients.

Complications in reverse shoulder arthroplasty

The reported rate of complications of reverse shoulder arthroplasty (RSA) seems to be higher than the complication rate of anatomical total shoulder arthroplasty.The reported overall complication rate of primary RSA is approximately 15%; when RSA is used in the revision setting, the complication rate may approach 40%.The most common complications of RSA include instability, infection, notching, loosening, nerve injury, acromial and scapular spine fractures, intra-operative fractures and component disengagement.Careful attention to implant design and surgical technique, including implantation of components in the correct version and height, selection of the best glenosphere-humeral bearing match, avoidance of impingement, and adequate management of the soft tissues will hopefully translate in a decreasing number of complications in the future. Cite this article: Barco R, Savvidou OD, Sperling JW, Sanchez-Sotelo J, Cofield RH. Complications in reverse shoulder arthroplasty. EFORT Open Rev 2016;1:72-80. DOI: 10.1302/2058-5241.1.160003.

Impaction autografting: bone-preserving, secure fixation of a standard humeral component

BACKGROUND

When fixed with bone ingrowth, a tight diaphyseal press fit, or cement, the humeral component of a shoulder arthroplasty may present problems of malposition, stress shielding, or periprosthetic fracture or difficulty with removal at revision arthroplasty. We have avoided the need for these fixation methods by using impaction cancellous autografting of the humeral stem, minimizing contact between the prosthetic stem and the humeral cortex. This study presents the radiographic survivorship of impaction-autografted humeral implants using component subsidence as the primary endpoint.

METHODS

We reviewed 286 primary anatomic shoulder arthroplasties having an average follow-up of 4.9 ± 2.7 years. Initial postoperative radiographs and minimum 2-year follow-up radiographs were evaluated by 3 observers to assess subsidence.

RESULTS

Two different implants (Humeral Replacement Prosthesis [HRP] and Global Advantage prosthesis) were used. Of 286 stems, 267 (93.4%) had not subsided. The Global Advantage prosthesis had a subsidence-free survival rate of 98.5% at 5 years. The stiffer-stemmed HRP used early during the study had a higher rate of subsidence compared with the currently used Global Advantage stem (hazard ratio, 5.6; P = .001). Radiolucent lines of 2 mm or greater were less common for the Global Advantage prosthesis than for the HRP in each of 7 zones (P < .001). Total shoulder arthroplasty was associated with a higher rate of subsidence compared with hemiarthroplasty (hazard ratio, 2.6; P = .12).

CONCLUSIONS

Impaction autografting provides a secure, durable, bone-preserving means of humeral component fixation in anatomic shoulder arthroplasty.

Reverse shoulder arthroplasty with a cementless short metaphyseal humeral implant without a stem: clinical and radiologic outcomes in prospective 2- to 7-year follow-up study

BACKGROUND

Reverse shoulder prostheses are increasingly used in recent years for treatment of glenohumeral arthropathy with deficient rotator cuff. Bone preservation is becoming a major goal in shoulder replacement surgery. Metaphyseal humeral components without a stem were developed to minimize bone resection and preserve bone. This study evaluated the clinical and radiologic outcomes at 2 to 7 years using a novel short metaphyseal reverse total shoulder arthroplasty (rTSA) prosthesis without a diaphyseal stem.

METHODS

Between 2005 and 2010, 102 consecutive patients underwent rTSA with this implant, and 98 (20 men, 78 women) were available for follow-up. Mean age was 74.4 years (range, 38-93 years). Indications were cuff tear arthropathy, 65; fracture sequelae, 12; rheumatoid arthritis, 13; failed rotator cuff repair, 3; cuff deficiency with loosening of anatomic prosthesis, 3; and acute trauma, 2; with 17 of these as revisions.

RESULTS

Patients' satisfaction (Subjective Shoulder Value) improved from 8 of 100 to 85 of 100. The Constant score improved from 14 to 59 (age- and sex-adjusted, 86; P < .0001). Range of motion improved from 47° to 129° in elevation, 10° to 51° in external rotation, and 21° to 65° in internal rotation. Radiographic analysis showed no lucencies, subsidence, or stress shielding around the humeral or glenoid components. Glenoid notching was found in 21 patients (18 grade 1-2; 3 grade 3).

CONCLUSIONS

The short metaphyseal rTSA design without a diaphyseal stem shows encouraging short- to midterm results, with excellent pain relief and shoulder function, restoration of good active range of motion, and high patient satisfaction scores. The design of this implant seems to result in improved rotational movements, low incidence of glenoid notching, and no implant loosening, subsidence, or stress shielding.

WITHDRAWN: Stemless humeral component in total shoulder arthroplasty: 2-year age-related clinical outcomes

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.