Waste Biogas Residue from Cassava Dregs as Carbon Source to Produce Galactomyces sp. Cczu11-1 Cellulase and its Enzymatic Saccharification

Enhanced extracellular β-mannanase production by overexpressing PrsA lipoprotein in Bacillus subtilis and optimizing culture conditions

In this study, first, β-mannanase gene man derived from Bacillus amyloliquefaciens CGMCC1.857 was cloned and expressed in Bacillus subtilis 168 to generate B. subtilis M1. However, the extracellular β-mannanase activity of B. subtilis M1 was not very high. To further increase extracellular β-mannanase extracytoplasmic molecular chaperone, PrsA lipoprotein was tandem expressed with man gene in B. subtilis 168 to yield B. subtilis M2. The secretion of β-mannanase of B. subtilis M2 was enhanced by 15.4%, compared with the control B. subtilis M1. Subsequently, process optimization strategies were also developed to enhance β-mannanase production by B. subtilis 168 M2. It was noted that the optimal temperature for β-mannanase production (25°C) was different from the optimal growth temperature (37°C) for B. subtilis. Based on these findings, a two-stage temperature control strategy was proposed where the bacterial culture was maintained at 37°C for the first 12 h to obtain a high rate of cell growth, followed by lowering the temperature to 25°C to enhance β-mannanase production. Using this strategy, the extracellular β-mannanase activity reached 5016 ± 167 U/ml at about 36 h, which was 19.1% greater than the best result obtained using a constant temperature (25°C). The result of this study showed that PrsA lipoprotein overexpression and two-stage temperature control strategy were more efficient for β-mannanase fermentation in B. subtilis.

Prospecting of soybean hulls as an inducer carbon source for the cellulase production

Cellulases constitute an enzymatic complex involved in the cellulose hydrolysis β-1, 4-glycosidic linkages to release of glucose. Therefore, its application to degrade agro-industrial residues becomes relevant, since glucose is a product of industrial interest, aiming at its conversion into biocommodity production (e.g., enzymes, bioethanol and other value-added biochemicals). Thus, in natura Soybean hulls as well as fractions obtained from its alkaline, autohydrolysis and organosolv pretreatments were used as carbon sources in submerged fermentation processes to evaluate the cellulase-inducing capacity using a Penicillium sp. strain. Results showed an inductive effect on the production of 0.130 and 0.066 U/mL for CMCase and FPase, respectively, using 1% of the in natura residue. Regarding the fraction obtained from soybean hulls pretreated by autohydrolysis and organosolv, avicelase and β-Glucosidase displayed a production of 0.200 and 0.550 U/mL, respectively. Therefore, the use of pretreated Soybean hull revealed its potential as an alternative carbon source for the cellulase production, which may contribute significantly to biotechnological purposes by adding value to an agro-industrial residue.

Influence of surfactant-free ionic liquid microemulsions pretreatment on the composition, structure and enzymatic hydrolysis of water hyacinth

This study investigated the pretreatment performance of surfactant-free ionic liquid microemulsions (ILMs) on water hyacinth. Pretreatment effects were evaluated in terms of lignocellulosic composition, structure and enzymatic hydrolysis. Analysis of the regenerated water hyacinth indicated that the content of the lignocellulosic composition changed, and the surface became more porous. After being pretreated with ILM(a) (mass ratio of toluene: ethanol: 1-ethyl-3-methylimidazolium acetate ([Emim]Ac)=0.35:0.3:0.35) at 70°C for 12h, the maximum delignification of 63.6% was observed. The cellulose of the water hyacinth was well protected and retained during the pretreatment process. After being enzymatically hydrolyzed for 48 h, the reducing sugar yield of the water hyacinth pretreated with ILM(a) at 70°C for 6 h was 563.7 mg/g, and its hydrolysis yield (86.1%) was nearly four and a half times of that of the untreated one (20.2%). In conclusion, the designed surfactant-free ILMs exhibit promising potential application in biomass pretreatment.

Enzymatic in situ saccharification of chestnut shell with high ionic liquid-tolerant cellulases from Galactomyces sp. CCZU11-1 in a biocompatible ionic liquid-cellulase media

In this study, it was the first time to report that the cellulases of Galactomyces sp. CCZU11-1 showed high activity and stability in the culture and reaction media containing IL [Mmim]DMP. Using untreated chestnut shell (CNS) as carbon source in the culture media containing IL [Mmim]DMP (5%, w/v), high activity of FPA (28.6U/mL), xylanase (186.2U/mL), and CMCase (107.3U/mL) were obtained, and 184.9mg/L of total protein was achieved. Furthermore, the changes in the structural features (crystallinity, morphology, and porosity) of the solid residue of CNS utilized with Galactomyces sp. CCZU11-1 were characterized with Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. After was enzymatically hydrolyzed with the prepared crude enzymes in IL diluted to 20% (w/v), a high yield of reducing sugars, 62.1%, was obtained. Significantly, Galactomyces sp. CCZU11-1 showed high potential for the efficient transformation of lignocellulosic materials to glucose in a single-step process.

Enhancement of enzymatic saccharification of corn stover with sequential Fenton pretreatment and dilute NaOH extraction

In this study, an effective method by the sequential Fenton pretreatment and dilute NaOH extraction (FT-AE) was chosen for pretreating corn stover. Before dilute NaOH (0.75 wt%) extraction at 90 °C for 1h, Fenton reagent (0.95 g/L of FeSO4 and 29.8 g/L of H2O2) was employed to pretreat CS at a solid/liquid ratio of 1/20 (w/w) at 35 °C for 30 min. The changes in the cellulose structural characteristics (porosity, morphology, and crystallinity) of the pretreated solid residue were correlated with the enhancement of enzymatic saccharification. After being enzymatically hydrolyzed for 72 h, the reducing sugars and glucose from the hydrolysis of 60 g/L FT-AE-CS pretreated could be obtained at 40.96 and 23.61 g/L, respectively. Finally, the recovered hydrolyzates containing glucose had no inhibitory effects on the ethanol fermenting microorganism. In conclusion, the sequential Fenton pretreatment and dilute NaOH extraction has high potential application in future.

Significantly improving enzymatic saccharification of high crystallinity index's corn stover by combining ionic liquid [Bmim]Cl-HCl-water media with dilute NaOH pretreatment

In this study, a pretreatment by combining acidified aqueous ionic liquid 1-butyl-3-methylimidazolium chloride (IL [Bmim]Cl) solution with dilute NaOH extraction was employed to pretreat high crystallinity index (CrI) of corn stover before its enzymatic saccharification. After NaOH extraction, [Bmim]Cl-HCl-water (78.8:1.2:20, w/w/w) media was used for further pretreatment at 130 °C for 30 min. After being enzymatically hydrolyzed for 48 h, corn stover pretreated could be biotransformed into reducing sugars in the yield of 95.1%. Furthermore, SEM, XRD and FTIR analyses of untreated and pretreated corn stovers were examined. It was found that the intact structure was disrupted by combination pretreatment and resulted in a porous and amorphous regenerated cellulosic material that greatly improved enzymatic hydrolysis. Finally, the recovered hydrolyzates obtained from the enzymatic hydrolysis of pretreated corn stovers could be fermented into ethanol efficiently. In conclusion, the combination pretreatment shows high potential application in future.