Sound Waves Induce Neural Differentiation of Human Bone Marrow-Derived Mesenchymal Stem Cells via Ryanodine Receptor-Induced Calcium Release and Pyk2 Activation

Sound waves alter the viability of tobacco cells via changes in cytosolic calcium, membrane integrity, and cell wall composition

The effect of sound waves (SWs) on plant cells can be considered as important as other mechanical stimuli like touch, wind, rain, and gravity, causing certain responses associated with the downstream signaling pathways on the whole plant. The objective of the present study was to elucidate the response of suspension-cultured tobacco cells (Nicotiana tabacum L. cv Burley 21) to SW at different intensities. The sinusoidal SW (1,000 Hz) was produced through a signal generator, amplified, and beamed to the one layer floating tobacco cells inside a soundproof chamber at intensities of 60, 75, and 90 dB at the plate level for 15, 30, 45, and 60 min. Calibration of the applied SW intensities, accuracy, and uniformity of SW was performed by a sound level meter, and the cells were treated. The effect of SW on tobacco cells was monitored by quantitation of cytosolic calcium, redox status, membrane integrity, wall components, and the activity of wall modifying enzymes. Cytosolic calcium ions increased as a function of sound intensity with a maximum level of 90 dB. Exposure to 90 dB was also accompanied by a significant increase of H2O2 and membrane lipid peroxidation rate but the reduction of total antioxidant and radical scavenging capacities. The increase of wall rigidity in these cells was attributed to an increase in wall-bound phenolic acids and lignin and the activities of phenylalanine ammonia-lyase and covalently bound peroxidase. In comparison, in 60- and 75 dB, radical scavenging capacity increased, and the activity of wall stiffening enzymes reduced, but cell viability showed no changes. The outcome of the current study reveals that the impact of SW on plant cells is started by an increase in cytosolic calcium. However, upon calcium signaling, downstream events, including alteration of H2O2 and cell redox status and the activities of wall modifying enzymes, determined the extent of SW effects on tobacco cells.

Extracellular ATP-induced calcium oscillations regulating the differentiation of osteoblasts through aerobic oxidation metabolism pathways

INTRODUCTION

The increase of ATP concentration in the extracellular space represents one of the effective signals that stimulate the physiological activities of cells when the bone is exposed to external mechanical stimulation such as stretching and shear stress force throughout life. However, the effects of ATP on osteoblast differentiation and related mechanisms are not well understood.

MATERIALS AND METHODS

In this study, the roles of extracellular ATP on osteoblast differentiation, intracellular calcium ([Ca2+]i) levels, metabolomics, and the expression of proteins related to energy metabolism were investigated.

RESULTS

Our results showed that 100 μM extracellular ATP initiated intracellular calcium ([Ca2+]i) oscillations via the calcium-sensing receptor (P2R) and promoted the differentiation of MC3T3-E1 cells. Metabolomics analysis showed that the differentiation of MC3T3-E1 cells depended on aerobic oxidation, but little glycolysis. Moreover, the differentiation of MC3T3-E1 cells and aerobic oxidation were suppressed with the inhibition of AMP-activated protein kinase (AMPK).

CONCLUSION

These results indicate that calcium oscillations triggered by extracellular ATP can activate aerobic oxidation through AMPK-related signaling pathways and thus promote osteoblast differentiation.

Sonomechanobiology: Vibrational stimulation of cells and its therapeutic implications

All cells possess an innate ability to respond to a range of mechanical stimuli through their complex internal machinery. This comprises various mechanosensory elements that detect these mechanical cues and diverse cytoskeletal structures that transmit the force to different parts of the cell, where they are transcribed into complex transcriptomic and signaling events that determine their response and fate. In contrast to static (or steady) mechanostimuli primarily involving constant-force loading such as compression, tension, and shear (or forces applied at very low oscillatory frequencies (≤ 1 Hz) that essentially render their effects quasi-static), dynamic mechanostimuli comprising more complex vibrational forms (e.g., time-dependent, i.e., periodic, forcing) at higher frequencies are less well understood in comparison. We review the mechanotransductive processes associated with such acoustic forcing, typically at ultrasonic frequencies (> 20 kHz), and discuss the various applications that arise from the cellular responses that are generated, particularly for regenerative therapeutics, such as exosome biogenesis, stem cell differentiation, and endothelial barrier modulation. Finally, we offer perspectives on the possible existence of a universal mechanism that is common across all forms of acoustically driven mechanostimuli that underscores the central role of the cell membrane as the key effector, and calcium as the dominant second messenger, in the mechanotransduction process.

Mesenchymal Stromal Cell Therapy in Spinal Cord Injury: Mechanisms and Prospects

Spinal cord injury (SCI) often leads to severe motor, sensory, and autonomic dysfunction in patients and imposes a huge economic cost to individuals and society. Due to its complicated pathophysiological mechanism, there is not yet an optimal treatment available for SCI. Mesenchymal stromal cells (MSCs) are promising candidate transplant cells for use in SCI treatment. The multipotency of MSCs, as well as their rich trophic and immunomodulatory abilities through paracrine signaling, are expected to play an important role in neural repair. At the same time, the simplicity of MSCs isolation and culture and the bypassing of ethical barriers to stem cell transplantation make them more attractive. However, the MSCs concept has evolved in a specific research context to encompass different populations of cells with a variety of biological characteristics, and failure to understand this can undermine the quality of research in the field. Here, we review the development of the concept of MSCs in order to clarify misconceptions and discuss the controversy in MSCs neural differentiation. We also summarize a potential role of MSCs in SCI treatment, including their migration and trophic and immunomodulatory effects, and their ability to relieve neuropathic pain, and we also highlight directions for future research.

Scaffold-free: A developing technique in field of tissue engineering

Scaffold-free tissue engineering can be considered as a rapidly developing technique in the field of tissue engineering. In the areas of regenerative medicine and wound healing, there is a demand of techniques where no scaffolds are used for the development of desired tissue. These techniques will overcome the problems of rejection and tissue failure which are common with scaffolds. Main breakthrough of scaffold free tissue engineering was after invention of 3-D printers which made it possible to print complex tissues which were not possible by conventional methods. Mathematical modeling is a prediction technique is used in tissue engineering for simulation of the model to be constructed. Coming to scaffold-free technique, mathematical modeling is necessary for the processing of the model that has to be bio-printed so as to avoid and changes in the final construct. Tissue construct is developed by use of non-destructive imaging techniques i.e. computed tomography (CT) and magnetic resonance imaging (MRI).In this review, we discussed about various mathematical models and the models which are widely used in bioprinting techniques such as Cellular Potts Model (CPM) and Cellular Particle Dynamic (CPD) model. Later, developed of 3-D tissue construct using micro CT scan images was explained. Finally, we discussed about scaffold free techniques such as 3-D bioprinting and cell sheet technology. In this manuscript, we proposed a cell sheet based bioprinting technique where mesenchymal stem cells (MSCs) on the surface of thermoresponsive polymer were subjected to mechanosensing either by introducing acoustic energies or stress created by polymeric strain energy function. Mechanosensing stimulus will trigger the intracellular signal transduction pathway leading to differentiation of the MSCs into desired cells.

Differentiation of genetically modified canine bone mesenchymal stem cells labeled with superparamagnetic iron oxide into neural‑like cells

The use of mesenchymal stem cells (MSCs) has been reported to improve outcomes in various types of nervous system diseases, primarily based on their neural regenerative differentiation ability and paracrine effect on different neuroprotective cytokines. Genetically modified MSCs may enhance the paracrine effect and may further improve the cell‑based therapeutic outcome of nervous system diseases. Magnetic resonance imaging has been used to monitor distribution and migration of cells labeled with superparamagnetic iron oxide (SPIO) nanoparticles. However, few studies have described the neural differentiation ability of genetically modified and SPIO‑labeled MSCs, which is the foundation for cell tracking and cell therapy in vivo. In this study, canine bone marrow‑derived MSCs (BMSCs) were initially labeled with SPIO, by culturing with 20 µg/ml SPIO for 24 h, and transfected with the brain‑derived neurotrophic factor (BDNF) gene using lentivirus transfection at different multiplicities of infection (MOI) values. The optimized MOI value was demonstrated by cellular viability and enhanced green fluorescent protein (eGFP) rate. Subsequently, the BMSCs were induced to differentiate into neuron‑like cells by chemical induction. The results demonstrated that BDNF‑overexpressing BMSCs labeled with SPIO can be induced into neuron‑like cells with high efficiency and minimal effects on cell viability. Additionally, following neural differentiation, the cells transfected with BDNF and labeled with SPIO expressed significantly higher levels of BDNF and neural markers. The overexpression of BDNF may contribute to neural differentiation of BDNFs, and may have potential benefits for further BMSC‑based therapy in vivo.

Mesenchymal stem cell differentiation: Control by calcium-activated potassium channels

Mesenchymal stem cells (MSCs) are widely used in modern medicine for which understanding the mechanisms controlling their differentiation is fundamental. Ion channels offer novel insights to this process because of their role in modulating membrane potential and intracellular milieu. Here, we evaluate the contribution of calcium-activated potassium (K_Ca ) channels to the three main components of MSC differentiation: initiation, proliferation, and migration. First, we demonstrate the importance of the membrane potential (V_m ) and the apparent association of hyperpolarization with differentiation. Of K_Ca subtypes, most evidence points to activity of big-conductance channels in inducing initiation. On the other hand, intermediate-conductance currents have been shown to promote progression through the cell cycle. While there is no information on the role of K_Ca channels in migration of MSCs, work from other stem cells and cancer cells suggest that intermediate-conductance and to a lesser extent big-conductance channels drive migration. In all cases, these effects depend on species, tissue origin and lineage. Finally, we present a conceptual model that demonstrates how K_Ca activity could influence differentiation by regulating V_m and intracellular Ca²⁺ oscillations. We conclude that K_Ca channels have significant involvement in MSC differentiation and could potentially enable novel tissue engineering approaches and therapies.

Inhibitory Effect and Mechanism of Mesenchymal Stem Cells Cultured in 3D System on Hepatoma Cells HepG2

Mesenchymal stem cells (MSCs) exhibit the feature of homing to tumor site and being immunosuppressive, which have broad prospects in tumor therapy. However, MSCs are commonly cultured in a two-dimensional (2D) condition, which would gradually loss some in vivo important properties. In this study, we built a three-dimensional (3D) system with collagen/Matrigel scaffolds to culture MSCs. The results indicated that MSCs in 3D scaffolds showed higher proliferation ability than that of in 2D cells. In vitro, 3D-cultured MSC-conditioned media (CM) significantly inhibited the proliferation of hepatoma cells HepG2 than that of in 2D-cultured MSC-CM and control groups. In vivo, animal transplantation experiment showed that the treatment of 3D-cultured MSC-CM could further significantly delay the tumor initiation and decrease the tumor volume. The microarray, quantitative PCR, and ELISA assay found that MSCs cultured in the 3D system expressed and secreted more amounts of IL-24. RT-PCR and western blot results showed that IL-24 can activate JAK1-STAT3 pathway via IL22R1 and IL20R2, and further inhibit the proliferation of HepG2 cells. Taken together, these results demonstrated that MSCs cultured in the 3D system had an inhibitory effect on the proliferation of HepG2 cells, probably through secreting more IL-24, which activated JAK1-STAT3 signaling and finally inhibited the cell proliferation to delay tumor initiation. This study also provided a simpler and more reliable approach for MSCs to suppress tumor cells, and provided effective experimental data for clinical treatment of tumor and experimental basis.

Numerical Simulation of Mass Transfer and Three-Dimensional Fabrication of Tissue-Engineered Cartilages Based on Chitosan/Gelatin Hybrid Hydrogel Scaffold in a Rotating Bioreactor

Cartilage tissue engineering is believed to provide effective cartilage repair post-injuries or diseases. Biomedical materials play a key role in achieving successful culture and fabrication of cartilage. The physical properties of a chitosan/gelatin hybrid hydrogel scaffold make it an ideal cartilage biomimetic material. In this study, a chitosan/gelatin hybrid hydrogel was chosen to fabricate a tissue-engineered cartilage in vitro by inoculating human adipose-derived stem cells (ADSCs) at both dynamic and traditional static culture conditions. A bioreactor that provides a dynamic culture condition has received greater applications in tissue engineering due to its optimal mass transfer efficiency and its ability to simulate an equivalent physical environment compared to human body. In this study, prior to cell-scaffold fabrication experiment, mathematical simulations were confirmed with a mass transfer of glucose and TGF-β2 both in rotating wall vessel bioreactor (RWVB) and static culture conditions in early stage of culture via computational fluid dynamic (CFD) method. To further investigate the feasibility of the mass transfer efficiency of the bioreactor, this RWVB was adopted to fabricate three-dimensional cell-hydrogel cartilage constructs in a dynamic environment. The results showed that the mass transfer efficiency of RWVB was faster in achieving a final equilibrium compared to culture in static culture conditions. ADSCs culturing in RWVB expanded three times more compared to that in static condition over 10 days. Induced cell cultivation in a dynamic RWVB showed extensive expression of extracellular matrix, while the cell distribution was found much more uniformly distributing with full infiltration of extracellular matrix inside the porous scaffold. The increased mass transfer efficiency of glucose and TGF-β2 from RWVB promoted cellular proliferation and chondrogenic differentiation of ADSCs inside chitosan/gelatin hybrid hydrogel scaffolds. The improved mass transfer also accelerated a dynamic fabrication of cell-hydrogel constructs, providing an alternative method in tissue engineering cartilage.