Intracellular mechanics and activity of breast cancer cells correlate with metastatic potential

Cancer cell response to extrinsic and intrinsic mechanical cue: opportunities for tumor apoptosis strategies

Increasing studies have revealed the importance of mechanical cues in tumor progression, invasiveness and drug resistance. During malignant transformation, changes manifest in either the mechanical properties of the tissue or the cellular ability to sense and respond to mechanical signals. The major focus of the review is the subtle correlation between mechanical cues and apoptosis in tumor cells from a mechanobiology perspective. To begin, we focus on the intracellular force, examining the mechanical properties of the cell interior, and outlining the role that the cytoskeleton and intracellular organelle-mediated intracellular forces play in tumor cell apoptosis. This article also elucidates the mechanisms by which extracellular forces guide tumor cell mechanosensing, ultimately triggering the activation of the mechanotransduction pathway and impacting tumor cell apoptosis. Finally, a comprehensive examination of the present status of the design and development of anti-cancer materials targeting mechanotransduction is presented, emphasizing the underlying design principles. Furthermore, the article underscores the need to address several unresolved inquiries to enhance our comprehension of cancer therapeutics that target mechanotransduction.

Mechanobiological cell adaptations to changing microenvironments determine cancer invasiveness: Experimentally validated finite element modeling

Metastases are the leading cause of cancer-associated deaths. A key process in metastasis is cell invasiveness, which is driven and controlled by cancer cell interactions with their microenvironment. We have previously shown that invasive cancer cells forcefully push into and indent physiological stiffness gels to cell-scale depths, where the percentage of indenting cells and their attained depths provide clinically relevant predictions of tumor invasiveness and the potential metastatic risk. The cell-attained, invasive indentation depths are directly affected by gel-microenvironment mechanics, which can concurrently modulate the cells' mechanics and force application capacity, in a complex, coordinated mechanobiological response. As it is impossible to experimentally isolate the different contributions of cell and gel mechanics to cancer cell invasiveness, we perform finite element modeling with literature-based parameters. Under average-scale, cell cytoplasm and nucleus mechanics and cell-applied force levels, increasing gel stiffness 1-50 kPa significantly reduced the attained indentation depth by >200%, while the gel's Poisson ratio reduced depths only by up to 20% and only when the ratio was >0.4; this reveals microenvironment mechanics that can promote invasiveness. Experiments with varying-invasiveness cancer cells exhibited qualitative variations in their responses to gel stiffness increase, for example large/small reduction in indentation depth or increase and then reduction. We quantitatively and qualitatively reproduced the different experimental responses via coordinated changes in cell mechanics and applied force levels. Thus, the different cancer cell capacities to adapt their mechanobiology in response to mechanically changing microenvironments likely determine the varying cancer invasiveness and metastatic risk levels in patients.

Biophysics in tumor growth and progression: from single mechano-sensitive molecules to mechanomedicine

Evidence from physical sciences in oncology increasingly suggests that the interplay between the biophysical tumor microenvironment and genetic regulation has significant impact on tumor progression. Especially, tumor cells and the associated stromal cells not only alter their own cytoskeleton and physical properties but also remodel the microenvironment with anomalous physical properties. Together, these altered mechano-omics of tumor tissues and their constituents fundamentally shift the mechanotransduction paradigms in tumorous and stromal cells and activate oncogenic signaling within the neoplastic niche to facilitate tumor progression. However, current findings on tumor biophysics are limited, scattered, and often contradictory in multiple contexts. Systematic understanding of how biophysical cues influence tumor pathophysiology is still lacking. This review discusses recent different schools of findings in tumor biophysics that have arisen from multi-scale mechanobiology and the cutting-edge technologies. These findings range from the molecular and cellular to the whole tissue level and feature functional crosstalk between mechanotransduction and oncogenic signaling. We highlight the potential of these anomalous physical alterations as new therapeutic targets for cancer mechanomedicine. This framework reconciles opposing opinions in the field, proposes new directions for future cancer research, and conceptualizes novel mechanomedicine landscape to overcome the inherent shortcomings of conventional cancer diagnosis and therapies.

Mechanobiology in oncology: basic concepts and clinical prospects

The interplay between genetic transformations, biochemical communications, and physical interactions is crucial in cancer progression. Metastasis, a leading cause of cancer-related deaths, involves a series of steps, including invasion, intravasation, circulation survival, and extravasation. Mechanical alterations, such as changes in stiffness and morphology, play a significant role in all stages of cancer initiation and dissemination. Accordingly, a better understanding of cancer mechanobiology can help in the development of novel therapeutic strategies. Targeting the physical properties of tumours and their microenvironment presents opportunities for intervention. Advancements in imaging techniques and lab-on-a-chip systems enable personalized investigations of tumor biomechanics and drug screening. Investigation of the interplay between genetic, biochemical, and mechanical factors, which is of crucial importance in cancer progression, offers insights for personalized medicine and innovative treatment strategies.

The cyto-linker and scaffolding protein "plectin" mis-localization leads to softening of cancer cells

Discovering tools to prevent cancer progression requires understanding the fundamental differences between normal and cancer cells. More than a decade ago, atomic force microscopy (AFM) revealed cancer cells' softer body compared to their healthy counterparts. Here, we investigated the mechanism underlying the softening of cancerous cells in comparison with their healthy counterparts based on AFM high resolution stiffness tomography and 3D confocal microscopy. We showed microtubules (MTs) network in invasive ductal carcinoma cell cytoskeleton is basally located and segmented for around 400 nm from the cell periphery. Additionally, the cytoskeleton scaffolding protein plectin exhibits a mis-localization from the cytoplasm to the surface of cells in the carcinoma which justifies the dissociation of the MT network from the cell's cortex. Furthermore, the assessment of MTs' persistence length using a worm-like-chain (WLC) model in high resolution AFM images showed lower persistence length of the single MTs in ductal carcinoma compared to that in the normal state. Overall, these tuned mechanics support the invasive cells to ascertain more flexibility under compressive forces in small deformations. These data provide new insights into the structural origins of cancer aids in progression.

Characterization of Breast Cancer Aggressiveness by Cell Mechanics

In healthy tissues, cells are in mechanical homeostasis. During cancer progression, this equilibrium is disrupted. Cancer cells alter their mechanical phenotype to a softer and more fluid-like one than that of healthy cells. This is connected to cytoskeletal remodeling, changed adhesion properties, faster cell proliferation and increased cell motility. In this work, we investigated the mechanical properties of breast cancer cells representative of different breast cancer subtypes, using MCF-7, tamoxifen-resistant MCF-7, MCF10A and MDA-MB-231 cells. We derived viscoelastic properties from atomic force microscopy force spectroscopy measurements and showed that the mechanical properties of the cells are associated with cancer cell malignancy. MCF10A are the stiffest and least fluid-like cells, while tamoxifen-resistant MCF-7 cells are the softest ones. MCF-7 and MDA-MB-231 show an intermediate mechanical phenotype. Confocal fluorescence microscopy on cytoskeletal elements shows differences in actin network organization, as well as changes in focal adhesion localization. These findings provide further evidence of distinct changes in the mechanical properties of cancer cells compared to healthy cells and add to the present understanding of the complex alterations involved in tumorigenesis.

Encapsulation and adhesion of nanoparticles as a potential biomarker for TNBC cells metastatic propensity

Metastasis is the main cause of cancer-related mortality; therefore, the ability to predict its propensity can remarkably affect survival rate. Metastasis development is predicted nowadays by lymph-node status, tumor size, histopathology, and genetic testing. However, all these methods may have inaccuracies, and some require weeks to complete. Identifying novel prognostic markers will open an essential source for risk prediction, possibly guiding to elevated patient treatment by personalized strategies. Cancer cell invasion is a critical step in metastasis. The cytoskeletal mechanisms used by metastatic cells for the invasion process are very similar to the utilization of actin cytoskeleton in the endocytosis process. In the current study, the adhesion and encapsulation efficiency of low-cost carboxylate-modified fluorescent nanoparticles by breast cancer cells with high (HM) and low metastatic potential (LM) have been evaluated; benign cells were used as control. Using high-content fluorescence imaging and analysis, we have revealed (within a short time of 1 h), that efficiency of nanoparticles adherence and encapsulation is sufficiently higher in HM cells compared to LM cells, while benign cells are not encapsulating or adhering the particles during experiment time at all. We have utilized custom-made automatic image analysis algorithms to find quantitative co-localization (Pearson's coefficients) of the nanoparticles with the imaged cells. The method proposed here is straightforward; it does not require especial equipment or expensive materials nor complicated cell manipulations, it may be potentially applicable for various cells, including patient-derived cells. Effortless and quantitative determination of the metastatic likelihood has the potential to be performed using patient-specific biopsy/surgery sample, which will directly influence the choice of protocols for cancer patient's treatment and, as a result, increase their life expectancy.

Physical confinement and cell proximity increase cell migration rates and invasiveness: A mathematical model of cancer cell invasion through flexible channels

Cancer cell migration between different body parts is the driving force behind cancer metastasis, which is the main cause of mortality of patients. Migration of cancer cells often proceeds by penetration through narrow cavities in locally stiff, yet flexible tissues. In our previous work, we developed a model for cell geometry evolution during invasion, which we extend here to investigate whether leader and follower (cancer) cells that only interact mechanically can benefit from sequential transmigration through narrow micro-channels and cavities. We consider two cases of cells sequentially migrating through a flexible channel: leader and follower cells being closely adjacent or distant. Using Wilcoxon's signed-rank test on the data collected from Monte Carlo simulations, we conclude that the modelled transmigration speed for the follower cell is significantly larger than for the leader cell when cells are distant, i.e. follower cells transmigrate after the leader has completed the crossing. Furthermore, it appears that there exists an optimum with respect to the width of the channel such that cell moves fastest. On the other hand, in the case of closely adjacent cells, effectively performing collective migration, the leader cell moves 12% faster since the follower cell pushes it. This work shows that mechanical interactions between cells can increase the net transmigration speed of cancer cells, resulting in increased invasiveness. In other words, interaction between cancer cells can accelerate metastatic invasion.

Adaptive tracking algorithm for trajectory analysis of cells and layer-by-layer assessment of motility dynamics

Tracking biological objects such as cells or subcellular components imaged with time-lapse microscopy enables us to understand the molecular principles about the dynamics of cell behaviors. However, automatic object detection, segmentation and extracting trajectories remain as a rate-limiting step due to intrinsic challenges of video processing. This paper presents an adaptive tracking algorithm (Adtari) that automatically finds the optimum search radius and cell linkages to determine trajectories in consecutive frames. A critical assumption in most tracking studies is that displacement remains unchanged throughout the movie and cells in a few frames are usually analyzed to determine its magnitude. Tracking errors and inaccurate association of cells may occur if the user does not correctly evaluate the value or prior knowledge is not present on cell movement. The key novelty of our method is that minimum intercellular distance and maximum displacement of cells between frames are dynamically computed and used to determine the threshold distance. Since the space between cells is highly variable in a given frame, our software recursively alters the magnitude to determine all plausible matches in the trajectory analysis. Our method therefore eliminates a major preprocessing step where a constant distance was used to determine the neighbor cells in tracking methods. Cells having multiple overlaps and splitting events were further evaluated by using the shape attributes including perimeter, area, ellipticity and distance. The features were applied to determine the closest matches by minimizing the difference in their magnitudes. Finally, reporting section of our software were used to generate instant maps by overlaying cell features and trajectories. Adtari was validated by using videos with variable signal-to-noise, contrast ratio and cell density. We compared the adaptive tracking with constant distance and other methods to evaluate performance and its efficiency. Our algorithm yields reduced mismatch ratio, increased ratio of whole cell track, higher frame tracking efficiency and allows layer-by-layer assessment of motility to characterize single-cells. Adaptive tracking provides a reliable, accurate, time efficient and user-friendly open source software that is well suited for analysis of 2D fluorescence microscopy video datasets.

Narrow-Gap Rheometry: A Novel Method for Measuring Cell Mechanics

The viscoelastic properties of a cell cytoskeleton contain abundant information about the state of a cell. Cells show a response to a specific environment or an administered drug through changes in their viscoelastic properties. Studies of single cells have shown that chemical agents that interact with the cytoskeleton can alter mechanical cell properties and suppress mitosis. This envisions using rheological measurements as a non-specific tool for drug development, the pharmacological screening of new drug agents, and to optimize dosage. Although there exists a number of sophisticated methods for studying mechanical properties of single cells, studying concentration dependencies is difficult and cumbersome with these methods: large cell-to-cell variations demand high repetition rates to obtain statistically significant data. Furthermore, method-induced changes in the cell mechanics cannot be excluded when working in a nonlinear viscoelastic range. To address these issues, we not only compared narrow-gap rheometry with commonly used single cell techniques, such as atomic force microscopy and microfluidic-based approaches, but we also compared existing cell monolayer studies used to estimate cell mechanical properties. This review provides insight for whether and how narrow-gap rheometer could be used as an efficient drug screening tool, which could further improve our current understanding of the mechanical issues present in the treatment of human diseases.

Computational modeling reveals a vital role for proximity-driven additive and synergistic cell-cell interactions in increasing cancer invasiveness

Solid-tumor cell invasion typically occurs by collective migration of attached cell-cohorts, yet we show here that indirect cell-interactions through the substrate can also drive invasiveness. We have previously shown that well-spaced, invasive cancer cells push-into and indent gels to depths of 10 µm, while closely adjacent, non-contacting cancer cells may reach up to 18 µm, potentially relying on cell-cell interactions through the gel-substrate. To test that, we developed finite element models of indenting cells, using experimental gel mechanics, cell mechanostructure, and force magnitudes. We show that under 50-350 nN of combined traction and normal forces, a stiff nucleus-region is essential in facilitating 5-10 µm single-cell indentations, while uniformly soft cells attain 1.6-fold smaller indentations. We observe that indentation depths of cells in close proximity (0.5-50 µm distance) increase relative to well-spaced cells, due to additive, continuum mechanics-driven contributions. Specifically, 2-3 cells applying 220 nN normal forces gained up to 3% in depth, which interestingly increased to 7.8% when two cells, 10 µm apart, applied unequal force-magnitudes (i.e., 220 and 350 nN). Such additive, energy-free contributions can reduce cell mechanical energy -output required for invasiveness, yet the experimentally observed 10-18 µm depths likely necessitate synergistic, mechanobiological changes, which may be mechanically triggered. We note that nucleus stiffening or cytoplasm softening by 25-50% increased indentation depths by only 1-7%, while depths increase nearly linearly with force-magnitude even to two-fold levels. Hence, cell-proximity triggered, synergistic and additive cell-interactions through the substrate can drive collective cancer-cell invasiveness, even without direct cell-cell interactions. STATEMENT OF SIGNIFICANCE: Metastatic cancer invasion typically occurs collectively in attached cell-cohorts. We have previously shown increased invasiveness in closely adjacent cancer cells that are able to push-into and indent soft-gels more deeply than single, well-spaced cells. Using finite element models, we reveal mechanisms of cell-proximity driven invasiveness, demonstrating an important role for the stiff nucleus. Cell-proximity can additively induce small increase in indentation depth via continuum mechanics contributions, especially when adjacent cells apply unequal forces, and without requiring increased cell-mechanical-energy-output. Concurrently, proximity-triggered synergistic interactions that produce changes in cell mechanics or capacity for increased force-levels can facilitate deep invasive-indentations. Thus, we reveal concurrent additive and synergistic mechanisms to drive collective cancer-cell invasiveness even without direct cell-cell interactions.

Breast cancer stem cells: mechanobiology reveals highly invasive cancer cell subpopulations

Cancer stem-like cells (CSCs) are a typically small subpopulation of highly tumorigenic cells that can self-renew, differentiate, drive tumor progression, and may mediate drug resistance and metastasis. Metastasis driving CSCs are expected to be highly invasive. To determine the relative invasiveness of CSCs, we isolate distinct subpopulations in the metastatic, MDA-MB-231 breast-cancer cell line, identified by the stem-cell markers aldehyde dehydrogenase (ALDH) and CD44. We determine CSC-subpopulation invasiveness levels using our rapid (2 h) mechanobiology-based assay. Specifically, invasive cells forcefully push and indent the surface of physiological-stiffness synthetic gels to cell-scale depths, where the percentage of indenting cells and their attained depths have previously provided clinically relevant predictions of the metastatic risk in different cancer types. We observe that the small (3.2%) CD44+ALDH+ cell-subpopulation indents more and attains significantly deeper depths (65% indenting to 6 ± 0.3 µm) relative to CD44+ALDH-, CD44-ALDH-, CD44-ALDH+ cells, and the whole-sample control (with 18-44% indenting cells reaching average depths of 4.4-5 µm). The CD44+ALDH+ similarly demonstrates twofold higher migratory capacity in Boyden chambers. The higher invasiveness of CD44+ALDH+ cells reveals their likely role in facilitating disease progression, providing prognostic markers for increased risk of recurrence and metastasis.

Measuring Mechanical Properties of Breast Cancer Cells with Atomic Force Microscopy

Using physical models to describe the response of cells to external stimuli has grown popular in the last three decades. The mechanical properties of cells are tightly linked to biochemical signaling pathways related to cell structure, proliferation, differentiation, motility, and cell fate. This chapter aims to describe how to perform mechanical experiments on MCF-7 breast cancer cells using the atomic force microscope. We present a stepwise procedure on sample preparation, force spectroscopy measurements and a guide on data evaluation using standard rheological models. We demonstrate how to derive all viscoelastic parameters of the cell by conducting stress relaxation and creep experiments. Additionally, the reader can find a sample dataset and the code required for data evaluation.

Mean square displacement for a discrete centroid model of cell motion

The mean square displacement (MSD) is an important statistical measure on a stochastic process or a trajectory. In this paper we find an approximation to the mean square displacement for a model of cell motion. The model is a discrete-time jump process which approximates a force-based model for cell motion. In cell motion, the mean square displacement not only gives a measure of overall drift, but it is also an indicator of mode of transport. The key to finding the approximation is to find the mean square displacement for a subset of the state space and use it as an approximation for the entire state space. We give some intuition as to why this is an unexpectedly good approximation. A lower bound and upper bound for the mean square displacement are also given. We show that, although the upper bound is far from the computed mean square displacement, in rare cases the large displacements are approached.

Substrate stiffness modulates the viscoelastic properties of MCF-7 cells

Cells sense stiffness of surrounding tissues and adapt their activity, proliferation, motility and mechanical properties based on such interactions. Cells probe the stiffness of the substrate by anchoring and pulling to their surroundings, transmitting force to the extracellular matrix and other cells, and respond to the resistance they sense, mainly through changes in their cytoskeleton. Cancer and other diseases alter stiffness of tissues, and the response of cancer cells to this stiffness can also be affected. In the present study we show that MCF-7 breast cancer cells seeded on polyacrylamide gels have the ability to detect the stiffness of the substrate and alter their mechanical properties in response. MCF-7 cells plated on soft substrates display lower stiffness and viscosity when compared to those seeded on stiffer gels or glass. These differences can be associated with differences in the morphology and cytoskeleton organisation, since cells seeded on soft substrates have a round morphology, while cells seeded on stiffer substrates acquire a flat and spread morphology with formation of actin filaments, similar to that observed when seeded on glass. These findings show that MCF-7 cells can detect the stiffness of the surrounding microenvironment and thus, modify their mechanical properties.

Mechanical interactions of invasive cancer cells through their substrate evolve from additive to synergistic

Non-contacting, adjacent cancer cells can mechanically interact through their substrate to increase their invasive and migratory capacities that underly metastases-formation. Such mechanical interactions may induce additive or synergistic enhancement of invasiveness, potentially indicating different underlying force-mechanisms. To identify cell-cell-gel interactions, we monitor the time-evolution of three-dimensional traction strains induced by MDA-MB-231 breast cancer cells adhering on physiological-stiffness (1.8 kPa) collagen gels and compare to simulations. Single metastatic cells apply strain energies of 0.2-2 pJ (average 0.51 ± 0.06 pJ) at all observation times (30-174 min) inducing a mechanical volume-of-effect in the collagen gel that is initially (<60 min from seeding) on the cell-volume scale (∼3000 µm³) and on average increases with time from cell seeding. When cells adhere closely adjacent, at short times (<60 min) we distinguish the additive contributions of neighboring cells to the strains, while at longer times strain fields are synergistically amplified and may facilitate increased cooperative/collective cancer-cell-invasiveness. The results of well-spaced and closely adjacent cells at short times match our simulations of additive deformations induced by radially applied strains with experimentally based inverse-distance decay. We thus reveal a time-dependent evolution from additive to synergistic interactions of adjacently adhering cells that may facilitate metastatic invasion.

Mean-field interactions between living cells in linear and nonlinear elastic matrices

Living cells respond to mechanical changes in the matrix surrounding them by applying contractile forces that are in turn transmitted to distant cells. We consider simple effective geometries for the spatial arrangement of cells, we calculate the mechanical work that each cell performs in order to deform the matrix, and study how that energy changes when a contracting cell is surrounded by other cells with similar properties and behavior. Cells regulating the displacements that they generate are attracted to each other in a manner that does not depend on the cell's rigidity. Whereas cells regulating the active stress that they apply repel each other. This repulsion depends on the cell's bulk modulus in spherical geometry, while in cylindrical geometries the interaction depends also on their shear modulus. In nonlinear, strain-stiffening matrices, for displacement regulation, in the presence of other cells, cell contraction is limited due to the divergence of the shear stress. For stress regulation, the interaction energy drops at the nonlinear stiffening stress. Our theoretical work provides insight into matrix-mediated interactions between contractile cells and on the role of their mechanical regulatory behavior.

Rapid, quantitative prediction of tumor invasiveness in non-melanoma skin cancers using mechanobiology-based assay

Non-melanoma skin cancers, including basal and squamous cell carcinomas (BCC and SCC), are the most common malignancies worldwide. BCC/SCC cancers are generally highly localized and can be surgically excised; however, invasive tumors may be fatal. Current diagnosis of skin cancer and prognosis of potential invasiveness are based mainly on clinical-pathological factors of the biopsied lesions. SCC invasiveness is also predicted by histomorphological factors, such as the degree of differentiation or the mitotic index, while BCCs are typically considered non-invasive. The above subjective measures do not provide direct, objective prognosis of cellular invasiveness in each specific sample. Hence, we have developed a mechanobiology-based approach to rapidly determine sample invasiveness. Here, cells from 15 fresh tissue samples of suspected non-melanoma skin cancer were seeded on physiological-stiffness (2.4 kPa) synthetic gels, and within 1-h invasive cell subsets were observed to push/indent the gel surface; clinicopathological results were separately obtained using standard protocols. The percentage of indenting cells from invasive (26.2 ± 2.4%) and non-invasive (4.8 ± 0.5%) SCC samples differed significantly (p < 0.0001), with well-separated invasiveness cutoffs of, respectively, > 12% and < 5%. The mechanical invasiveness directly agrees with the SCC cell-differentiation state, where over 3.3-fold more (p < 0.0001) cells from moderately differentiated samples indent the gels as compared to well-differentiated cell samples. In BCCs, < 20% of cells typically indented, and a highly migratory, desmoplastic sample was identified with 46%. By providing rapid, quantitative, early prognosis of invasiveness and potential metastatic risk, our rapid technology may facilitate informed (bed-side) decision making and choice of disease-management protocols on the time-scale of the initial diagnosis and surgical excision.

Multiscale rheology of glioma cells

Cells tend to soften during cancer progression, suggesting that mechanical phenotyping could be used as a diagnostic or prognostic method. Here we investigate the cell mechanics of gliomas, brain tumors that originate from glial cells or glial progenitors. Using two microrheology techniques, a single-cell parallel plates rheometer to probe whole-cell mechanics and optical tweezers to probe intracellular rheology, we show that cell mechanics discriminates human glioma cells of different grades. When probed globally, grade IV glioblastoma cells are softer than grade III astrocytoma cells, while they are surprisingly stiffer at the intracellular level. We explain this difference between global and local intracellular behaviours by changes in the composition and spatial organization of the cytoskeleton, and by changes in nuclear mechanics. Our study highlights the need to combine rheology techniques for potential diagnostic or prognostic methods based on cancer cell mechanophenotyping.

A formalism for modelling traction forces and cell shape evolution during cell migration in various biomedical processes

The phenomenological model for cell shape deformation and cell migration Chen (BMM 17:1429–1450, 2018), Vermolen and Gefen (BMM 12:301–323, 2012), is extended with the incorporation of cell traction forces and the evolution of cell equilibrium shapes as a result of cell differentiation. Plastic deformations of the extracellular matrix are modelled using morphoelasticity theory. The resulting partial differential differential equations are solved by the use of the finite element method. The paper treats various biological scenarios that entail cell migration and cell shape evolution. The experimental observations in Mak et al. (LC 13:340–348, 2013), where transmigration of cancer cells through narrow apertures is studied, are reproduced using a Monte Carlo framework.

A constriction channel analysis of astrocytoma stiffness and disease progression

Studies have demonstrated that cancer cells tend to have reduced stiffness (Young's modulus) compared to their healthy counterparts. The mechanical properties of primary brain cancer cells, however, have remained largely unstudied. To investigate whether the stiffness of primary brain cancer cells decreases as malignancy increases, we used a microfluidic constriction channel device to deform healthy astrocytes and astrocytoma cells of grade II, III, and IV and measured the entry time, transit time, and elongation. Calculating cell stiffness directly from the experimental measurements is not possible. To overcome this challenge, finite element simulations of the cell entry into the constriction channel were used to train a neural network to calculate the stiffness of the analyzed cells based on their experimentally measured diameter, entry time, and elongation in the channel. Our study provides the first calculation of stiffness for grades II and III astrocytoma and is the first to apply a neural network analysis to determine cell mechanical properties from a constriction channel device. Our results suggest that the stiffness of astrocytoma cells is not well-correlated with the cell grade. Furthermore, while other non-central-nervous-system cell types typically show reduced stiffness of malignant cells, we found that most astrocytoma cell lines had increased stiffness compared to healthy astrocytes, with lower-grade astrocytoma having higher stiffness values than grade IV glioblastoma. Differences in nucleus-to-cytoplasm ratio only partly explain differences in stiffness values. Although our study does have limitations, our results do not show a strong correlation of stiffness with cell grade, suggesting that other factors may play important roles in determining the invasive capability of astrocytoma. Future studies are warranted to further elucidate the mechanical properties of astrocytoma across various pathological grades.

Actin as a Target to Reduce Cell Invasiveness in Initial Stages of Metastasis

We demonstrate the relative roles of the cell cytoskeleton, and specific importance of actin in facilitating mechanical aspects of metastatic invasion. A crucial step in metastasis, the typically lethal spread of cancer to distant body-sites, is cell invasion through dense tissues composed of extracellular matrix and various non-cancerous cells. Cell invasion requires cell-cytoskeleton remodeling to facilitate dynamic morphological changes and force application. We have previously shown invasive cell subsets in heterogeneous samples can rapidly (2 h) and forcefully indent non-degradable, impenetrable, synthetic gels to cell-scale depths. The amounts of indenting cells and their attained depths provide the mechanical invasiveness of the sample, which as we have shown agrees with the in vitro metastatic potential and the in vivo metastatic risk in humans. To identify invasive force-application mechanisms, we evaluated changes in mechanical invasiveness following chemical perturbations targeting the structure and function of cytoskeleton elements and associated proteins. We evaluate effects on short-term (2-hr) indentations of single, well-spaced or closely situated cells as compared to long-time-scale Boyden chamber migration. We show that actomyosin inhibition may be used to reduce (mechanical) invasiveness of single or collectively invading cells, while actin-disruption may induce escape-response of treated single-cells, which may promote metastasis.

Lung mechanics modifications facilitating metastasis are mediated in part by breast cancer-derived extracellular vesicles

Tumor microenvironment-mechanics greatly affect tumor-cell characteristics such as invasion and proliferation. We and others have previously shown that after chemotherapy, tumor cells shed more extracellular vesicles (EVs), leading to tumor growth and even spread, via angiogenesis and the mobilization of specific bone-marrow-derived cells contributing to metastasis. However, physical, mechanobiological and mechanostructural changes at premetastatic sites that may support tumor cell seeding, have yet to be determined. Here, we collected tumor-derived extracellular vesicles (tEV) from breast carcinoma cells exposed to paclitaxel chemotherapy, and tested their effects on tissue mechanics (eg, elasticity and stiffness) of likely metastatic organs in cancer-free mice, using shear rheometry. Cancer-free mice were injected with saline or with tEVs from untreated cells and lung tissue demonstrated widely variable, viscoelastic mechanics, being more elastic than viscous. Contrastingly, tEVs from chemotherapy-exposed cells induced more uniform, viscoelastic lung mechanics, with lower stiffness and viscosity; interestingly, livers were significantly stiffer than both controls. We observe statistically significant differences in softening of lung samples from all three groups under increasing strain-amplitudes and in their stiffening under increasing strain-frequencies; the groups reach similar values at high strain amplitudes and frequencies, indicating local changes in tissue microstructure. Evaluation of genes associated with the extracellular matrix and fibronectin protein-expression revealed potential compositional changes underlying the altered mechanics. Thus, we propose that tEVs, even without cancer cells, contribute to metastasis by changing microstructures at distant organs. This is done partially by altering the composition and mechanostructure of tissues to support tumor cell invasion and seeding.

Cytoskeletal tubulin competes with actin to increase deformability of metastatic melanoma cells

The formation of membrane protrusions during migration is reliant upon the cells' cytoskeletal structure and stiffness. It has been reported that actin disruption blocks protrusion and decreases cell stiffness whereas microtubule disruption blocks protrusion but increases stiffness in several cell types. In melanoma, cell migration is of concern as this cancer spreads unusually rapidly during early tumour development. The aim of this study was to characterise motility, structural properties and stiffness of human melanoma cells at radial growth phase (RGP), vertical growth phase (VGP), and metastatic stage (MET) in two-dimensional in vitro environments. Wound assays, western blotting and mitochondrial particle tracking were used to assess cell migration, cytoskeletal content and intracellular fluidity. Our results indicate that cell motility increase with increasing disease stage. Despite their different motility, RGP and VGP cells exhibit similar fluidity, actin and tubulin levels. MET cells, however, display increased fluidity which was associated with increased actin and tubulin content. Our findings demonstrate an interplay between actin and microtubule activity and their role in increasing motility of cells while minimizing cell stiffness at advanced disease stage. In earlier disease stages, cell stiffness may however not serve as an indicator of migratory capabilities.

Bacterial Natural Disaccharide (Trehalose Tetraester): Molecular Modeling and in Vitro Study of Anticancer Activity on Breast Cancer Cells

Isolation and characterization of new biologically active substances affecting cancer cells is an important issue of fundamental research in biomedicine. Trehalose lipid was isolated from Rhodococcus wratislaviensis strain and purified by liquid chromatography. The effect of trehalose lipid on cell viability and migration, together with colony forming assays, were performed on two breast cancer (MCF7-low metastatic; MDA-MB231-high metastatic) and one "normal" (MCF10A) cell lines. Molecular modeling that details the structure of the neutral and anionic form (more stable at physiological pH) of the tetraester was carried out. The tentative sizes of the hydrophilic (7.5 Å) and hydrophobic (12.5 Å) portions of the molecule were also determined. Thus, the used trehalose lipid is supposed to interact as a single molecule. The changes in morphology, adhesion, viability, migration, and the possibility of forming colonies in cancer cell lines induced after treatment with trehalose lipid were found to be dose and time dependent. Based on the theoretical calculations, a possible mechanism of action and membrane asymmetry between outer and inner monolayers of the bilayer resulting in endosome formation were suggested. Initial data suggest a mechanism of antitumor activity of the purified trehalose lipid and its potential for biomedical application.

Force Spectrum Microscopy Using Mitochondrial Fluctuations of Control and ATP-Depleted Cells

A single-cell assay of active and passive intracellular mechanical properties of mammalian cells could give significant insight into cellular processes. Force spectrum microscopy (FSM) is one such technique, which combines the spontaneous motion of probe particles and the mechanical properties of the cytoskeleton measured by active microrheology using optical tweezers to determine the force spectrum of the cytoskeleton. A simpler and noninvasive method to perform FSM would be very useful, enabling its widespread adoption. Here, we develop an alternative method of FSM using measurement of the fluctuating motion of mitochondria. Mitochondria of the C3H-10T1/2 cell line were labeled and tracked using confocal microscopy. Mitochondrial probes were selected based on morphological characteristics, and their mean-square displacement, creep compliance, and distributions of directional change were measured. We found that the creep compliance of mitochondria resembles that of particles in viscoelastic media. However, comparisons of creep compliance between controls and cells treated with pharmacological agents showed that perturbations to the actomysoin network had surprisingly small effects on mitochondrial fluctuations, whereas microtubule disruption and ATP depletion led to a significantly decreased creep compliance. We used properties of the distribution of directional change to identify a regime of thermally dominated fluctuations in ATP-depleted cells, allowing us to estimate the viscoelastic parameters for a range of timescales. We then determined the force spectrum by combining these viscoelastic properties with measurements of spontaneous fluctuations tracked in control cells. Comparisons with previous measurements made using FSM revealed an excellent match.

Sodium pyruvate pre-treatment prevents cell death due to localised, damaging mechanical strains in the context of pressure ulcers

We demonstrate sodium pyruvate (NaPy) pre-treatment as a successful approach for pressure ulcer (PU) prevention by averting their aetiological origin-cell-level damage and death by large, sustained mechanical loads. We evaluated the NaPy pre-treatment effect on permeability changes in the cell's plasma membrane (PM) following application of in vitro damaging-level strains. Fibroblasts or myoblasts, respectively, models for superficial or deep-tissue damage were grown in 0 or 1 mM NaPy, emulating typical physiological or cell culture conditions. Cells were pre-treated for 4 hours with 0 to 5 mM NaPy prior to 3-hour sustained, damaging-level loads (12% strain). PM permeability was quantified by the cell uptake of small (4 kDa), fluorescent dextran compared with unstrained control using fluorescence-activated cell sorting (FACS). Pre-treatment with 1 mM, and especially 5 mM, NaPy significantly reduces damage to PM integrity. Long-term NaPy pre-exposure can improve protective treatment, affecting fibroblasts and myoblasts differently. Pre-treating with NaPy, a natural cell metabolite, allows cells under damaging-level mechanical loads to maintain their PM integrity, that is, to avoid loss of homeostasis and inevitable, eventual cell death, by preventing initial, microscale stages of PU formation. This pre-treatment may be applied prior to planned periods of immobility, for example, planned surgery or transport, to prolong safe time in a position by preventing initial cell damage that can cascade and lead to PU formation.

Elastic interactions between anisotropically contracting circular cells

We study interactions between biological cells that apply anisotropic active mechanical forces on an elastic substrate. We model the cells as thin disks that along their perimeters apply radial, but angle-dependent forces on the substrate. We obtain analytical expressions for the elastic energy stored in the substrate as a function of the distance between the cells, the Fourier modes of applied forces, and their phase angles. We show how the relative phases of the forces applied by the cells can switch the interaction between attractive and repulsive, and relate our results to those for linear force dipoles. For long enough distances, the interaction energy decays in magnitude as a power law of the cell-cell distance with an integer exponent that generally increases with the Fourier modes of the applied forces.

Mechanical and migratory properties of normal, scar, and Dupuytren's fibroblasts

Mechanical properties of myofibroblasts play a key role in Dupuytren's disease. Here, we used atomic force microscopy to measure the viscoelastic properties of 3 different types of human primary fibroblasts derived from a same patient: normal and scar dermal fibroblasts and palmar fascial fibroblasts from Dupuytren's nodules. Different stiffness hydrogels (soft ~1 kPa and stiff ~ 50 kPa) were used as cell culture matrix to mimic the mechanical properties of the natural tissues, and atomic force microscopy step response force curves were used to discriminate between elastic and viscous properties of cells. Since transforming growth factor-β1 (TGF-β1) is known to induce expression of α-smooth muscle actin positive stress fibers in myofibroblasts, we investigated the behavior of these fibroblasts before and after applying TGF-β1. Finally, we performed an in vitro cell motility test, the wound healing or scratch assay, to evaluate the migratory properties of these fibroblasts. We found that (1) Dupuytren's fibroblasts are stiffer than normal and scar fibroblasts, the elastic modulus E ranging from 4.4, 2.1, to 1.8 kPa, for Dupuytren's, normal and scar fibroblasts, respectively; (2) TGF-β1 enhances the level of α-smooth muscle actin expression and thus cell stiffness in Dupuytren's fibroblasts (E, ~6.2 kPa); (3) matrix stiffness influences cell mechanical properties most prominently in Dupuytren's fibroblasts; and (4) Dupuytren's fibroblasts migrate slower than the other fibroblasts by a factor of 3. Taking together, our results showed that mechanical and migratory properties of fibroblasts might help to discriminate between different pathological conditions, helping to identify and recognize specific cell phenotypes.

14-3-3 proteins tune non-muscle myosin II assembly

The 14-3-3 family comprises a group of small proteins that are essential, ubiquitous, and highly conserved across eukaryotes. Overexpression of the 14-3-3 proteins σ, ϵ, ζ, and η correlates with high metastatic potential in multiple cancer types. In Dictyostelium, 14-3-3 promotes myosin II turnover in the cell cortex and modulates cortical tension, cell shape, and cytokinesis. In light of the important roles of 14-3-3 proteins across a broad range of eukaryotic species, we sought to determine how 14-3-3 proteins interact with myosin II. Here, conducting in vitro and in vivo studies of both Dictyostelium (one 14-3-3 and one myosin II) and human proteins (seven 14-3-3s and three nonmuscle myosin IIs), we investigated the mechanism by which 14-3-3 proteins regulate myosin II assembly. Using in vitro assembly assays with purified myosin II tail fragments and 14-3-3, we demonstrate that this interaction is direct and phosphorylation-independent. All seven human 14-3-3 proteins also altered assembly of at least one paralog of myosin II. Our findings indicate a mechanism of myosin II assembly regulation that is mechanistically conserved across a billion years of evolution from amebas to humans. We predict that altered 14-3-3 expression in humans inhibits the tumor suppressor myosin II, contributing to the changes in cell mechanics observed in many metastatic cancers.

In Vitro Modeling of Mechanics in Cancer Metastasis

In addition to a multitude of genetic and biochemical alterations, abnormal morphological, structural, and mechanical changes in cells and their extracellular environment are key features of tumor invasion and metastasis. Furthermore, it is now evident that mechanical cues alongside biochemical signals contribute to critical steps of cancer initiation, progression, and spread. Despite its importance, it is very challenging to study mechanics of different steps of metastasis in the clinic or even in animal models. While considerable progress has been made in developing advanced in vitro models for studying genetic and biological aspects of cancer, less attention has been paid to models that can capture both biological and mechanical factors realistically. This is mainly due to lack of appropriate models and measurement tools. After introducing the central role of mechanics in cancer metastasis, we provide an outlook on the emergence of novel in vitro assays and their combination with advanced measurement technologies to probe and recapitulate mechanics in conditions more relevant to the metastatic disease.

The Mechanics of Single Cell and Collective Migration of Tumor Cells

Metastasis is a dynamic process in which cancer cells navigate the tumor microenvironment, largely guided by external chemical and mechanical cues. Our current understanding of metastatic cell migration has relied primarily on studies of single cell migration, most of which have been performed using two-dimensional (2D) cell culture techniques and, more recently, using three-dimensional (3D) scaffolds. However, the current paradigm focused on single cell movements is shifting toward the idea that collective migration is likely one of the primary modes of migration during metastasis of many solid tumors. Not surprisingly, the mechanics of collective migration differ significantly from single cell movements. As such, techniques must be developed that enable in-depth analysis of collective migration, and those for examining single cell migration should be adopted and modified to study collective migration to allow for accurate comparison of the two. In this review, we will describe engineering approaches for studying metastatic migration, both single cell and collective, and how these approaches have yielded significant insight into the mechanics governing each process.

The effect of active fluctuations on the dynamics of particles, motors and DNA-hairpins

Inspired by recent experiments on the dynamics of particles and polymers in artificial cytoskeletons and in cells, we introduce a modified Langevin equation for a particle in an environment that is a viscoelastic medium and that is brought out of equilibrium by the action of active fluctuations caused by molecular motors. We show that within such a model, the motion of a free particle crosses over from superdiffusive to subdiffusive as observed for tracer particles in an in vitro cytoskeleton or in a cell. We investigate the dynamics of a particle confined by a harmonic potential as a simple model for the motion of the tethered head of kinesin-1. We find that the probability that the head is close to its binding site on the microtubule can be enhanced by a factor of two due to active forces. Finally, we study the dynamics of a particle in a double well potential as a model for the dynamics of DNA-hairpins. We show that the active forces effectively lower the potential barrier between the two minima and study the impact of this phenomenon on the zipping/unzipping rate.

Disentangling Random Motion and Flow in a Complex Medium

We describe a technique for deconvolving the stochastic motion of particles from large-scale fluid flow in a dynamic environment such as that found in living cells. The method leverages the separation of timescales to subtract out the persistent component of motion from single-particle trajectories. The mean-squared displacement of the resulting trajectories is rescaled so as to enable robust extraction of the diffusion coefficient and subdiffusive scaling exponent of the stochastic motion. We demonstrate the applicability of the method for characterizing both diffusive and fractional Brownian motion overlaid by flow and analytically calculate the accuracy of the method in different parameter regimes. This technique is employed to analyze the motion of lysosomes in motile neutrophil-like cells, showing that the cytoplasm of these cells behaves as a viscous fluid at the timescales examined.

3D is not enough: Building up a cell instructive microenvironment for tumoral stroma microtissues

We fabricated three-dimensional microtissues with the aim to replicate in vitro the composition and the functionalities of the tumor microenvironment. By arranging either normal fibroblasts (NF) or cancer-activated fibroblasts (CAF) in two different three dimensional (3D) configurations, two kinds of micromodules were produced: spheroids and microtissues. Spheroids were obtained by means of the traditional cell aggregation technique resulting in a 3D model characterized by high cell density and low amount of extracellular proteins. The microtissues were obtained by culturing cells into porous gelatin microscaffolds. In this latter configuration, cells assembled an intricate network of collagen, fibronectin and hyaluronic acid. We investigated the biophysical properties of both 3D models in terms of cell growth, metabolic activity, texture and composition of the extracellular matrix (via histological analysis and multiphoton imaging) and cell mechanical properties (via Particle Tracking Microrheology). In the spheroid models such biophysical properties remained unchanged regardless to the cell type used. In contrast, normal-microtissues and cancer-activated-microtissues displayed marked differences. CAF-microtissues possessed higher proliferation rate, superior contraction capability, different micro-rheological properties and an extracellular matrix richer in collagen fibronectin and hyaluronic acid. At last, multiphoton investigation revealed differences in the collagen network architecture. Taken together, these results suggested that despite to cell spheroids, microtissues better recapitulate the important differences existing in vivo between normal and cancer-activated stroma representing a more suitable system to mimic in vitro the stromal element of the tumor tissues.

STATEMENT OF SIGNIFICANCE

This work concerns the engineering of tumor tissue in vitro. Tumor models serve as biological equivalent to study pathologic progression and to screen or validate the drugs efficacy. Tumor tissue is composed by malignant cells surviving in a microenvironment, or stroma. Stroma plays a pivotal role in cancer progression. Current in vitro models, i.e. spheroids, can't replicate the phenomena related to the tumor stroma remodeling. For this reason, to better replicate the tumor physiology in vitro that include functional and morphological changes, a novel 3D cancer model is proposed.

Ultrasound Effect on Cancerous versus Non-Cancerous Cells

Previous studies have found that cancer cells whose metastatic potential is low are more vulnerable to mechanical stress-induced trauma to their cytoskeleton compared with benign cells. Because ultrasound induces mechanical stresses on cells and tissues, it is postulated that there may be a way to apply ultrasound to tumors to reduce their ability to metastasize. The difference between low-malignant-potential cancer cells and benign cells could be a result of their different responses to the mechanical stress insonation induced. This hypothesis was tested in vitro and in vivo. Low-malignant-potential cells were found to be more sensitive to insonation, resulting in a significantly higher mortality rate compared with that of benign cells, 89% versus 21%, respectively. This effect can be controlled by varying ultrasound parameters: intensity, duration, and duty cycle. Thus, the results presented in this study suggest the application of ultrasound to discriminate between benign and malignant cells.

A computational framework for particle and whole cell tracking applied to a real biological dataset

Cell tracking is becoming increasingly important in cell biology as it provides a valuable tool for analysing experimental data and hence furthering our understanding of dynamic cellular phenomena. The advent of high-throughput, high-resolution microscopy and imaging techniques means that a wealth of large data is routinely generated in many laboratories. Due to the sheer magnitude of the data involved manual tracking is often cumbersome and the development of computer algorithms for automated cell tracking is thus highly desirable. In this work, we describe two approaches for automated cell tracking. Firstly, we consider particle tracking. We propose a few segmentation techniques for the detection of cells migrating in a non-uniform background, centroids of the segmented cells are then calculated and linked from frame to frame via a nearest-neighbour approach. Secondly, we consider the problem of whole cell tracking in which one wishes to reconstruct in time whole cell morphologies. Our approach is based on fitting a mathematical model to the experimental imaging data with the goal being that the physics encoded in the model is reflected in the reconstructed data. The resulting mathematical problem involves the optimal control of a phase-field formulation of a geometric evolution law. Efficient approximation of this challenging optimal control problem is achieved via advanced numerical methods for the solution of semilinear parabolic partial differential equations (PDEs) coupled with parallelisation and adaptive resolution techniques. Along with a detailed description of our algorithms, a number of simulation results are reported on. We focus on illustrating the effectivity of our approaches by applying the algorithms to the tracking of migrating cells in a dataset which reflects many of the challenges typically encountered in microscopy data.