Development and Validation of a LC-FD Method for the Simultaneous Determination of Eight Bisphenols in Soft Drinks

Electrospun Polycrown Ether Composite Nanofibers as an Adsorbent for On-Line Solid Phase Extraction of Eight Bisphenols from Drinking Water Samples with Column-Switching Prior to High Performance Liquid Chromatography

Bisphenols (BPs) are a class of endocrine disruptors widely existing in the environment. They have a great impact on human health owing to their environmental endocrine disrupting effects, chronic toxicity, neurotoxicity, cytotoxicity and genetic toxicity. In this paper, an on-line packed fiber solid phase extraction (PFSPE) coupling with column-switching HPLC-FLD determination method was developed for the determination of eight BPs in drinking water. The poly (dibenzo-18-crown-6-ether)/polystyrene composite nanofibers (PDB18C6/PS) were prepared by electrospinning and used as an adsorbent for the on-line PFSPE column. The on-line PFSPE-HPLC equipment contained a dual ternary pump and a switching valve to enable enrichment, purification, and analysis directly in the system. The results showed that the proposed on-line PFSPE-HPLC-FLD method realized the simultaneous separation and detection of eight BPs: BPF, BPE, BPA, BPB, BPAF, BPAP, BPC and BPZ. The curves of the target analytes were prepared with good correlation coefficient values (r2 > 0.998) in the range of 50−1000 pg/mL. The limit of detection (S/N = 3) was 20 pg/mL, the limit of quantitation (S/N = 10) is 50 pg/mL. The recoveries of eight BPs were 94.8−127.3%, and the intra-day precisions (RSD) were less than 10%. The PFSPE column made of the PDB18C6/PS composite nanofibers has stable properties and can be reused at least 200 times. In the detection of drinking water samples, BPZ was detected in nearly 80% of drinking water samples, and BPA, BPAP, BPF and BPAF were also detected in some water samples. This high level of integration and automation was achieved in pretreatment of eight BPs from water samples. The proposed simple, rapid, and practical method has been successfully applied to the detection of eight BPs in drinking water, which can provide powerful technical support for drinking water quality and safety monitoring.

Monitoring of Pollutants Content in Bottled and Tap Drinking Water in Italy

The concentration levels of thirteen organic pollutants and selected heavy metals were investigated in 40 plastics bottled and tap water samples. Some of the selected contaminants have an ascertained or suspected endocrine disrupting activity, such as Bisphenol A (BPA) and its analogs, and Bis 2-ethylhexyl phthalate (DEHP), which are used by industries as plasticizers. The most frequently detected pollutants were Bisphenol AF (BPAF) (detection frequency (DF) = 67.5%, mean 387.21 ng L⁻¹), DEHP (DF = 62.5%, mean 46.19 µg L⁻¹) and BPA (DF = 60.0%, mean 458.57 ng L⁻¹), with higher concentration levels found in tap waters. Furthermore, a possible level of exposure to thirteen pollutants via drinking water intake was calculated. Our findings show that, even though the occurrence of contaminants and heavy metals in drinking waters does not pose an immediate, acute health risk for the population, their levels should be constantly monitored and “hard-wired” into everyday practice. Indeed, the health impact to the continuous and simultaneous intake of a huge variety of xenobiotics from various sources by humans is complex and still not fully understood.

Comparison of chromatographic performance of co-grafted silica using octadecene respectively with vinylpyrrolidone, vinylimidazole and vinylpyridine

Three reversed-phase liquid chromatography (RPLC) stationary phases were obtained by using long-chain 1-octadecene (OD) co-grafted with three short-chain monomers, including N-vinylpyrrolidone (NVP), 1-vinylimidazole (VIm) and 4-vinylpyridine (VPy), respectively (noted as Sil@ODNVP, Sil@ODVIm and Sil@ODVPy). Peak broadening phenomenon in RPLC mode which resulted by short-chain was examined carefully. Compared with Sil@ODNVP, both of Sil@ODVIm and Sil@ODVPy had smaller peak width and higher column efficiency in the separation of 10 polycyclic aromatic hydrocarbons (PAHs), 7 alkyl benzenes, 7 aromatic acids, 7 aromatic esters and 9 phenols. In addition, VPy has the strongest ion exchange capacity than other two short-chains. In this case, we can see that VPy and VIm maybe more suitable to be used as functional monomeric modifiers of new chromatographic stationary phases.

Study on the chemical behaviour of Bisphenol S during the in vitro gastrointestinal digestion and its bioaccessibility

This study evaluated the chemical behaviour of Bisphenol S (BPS) and determined its bioaccessibility after human ingestion using a standardised in vitro gastrointestinal digestion protocol and an analytical method based on high-pressure liquid chromatography coupled with a photodiode array and tandem mass spectrometry. The effects of different factors such as gastric pH, enzymes, and food matrix on the solubility and chemical stability of BPS were studied to evaluate their contribution to its bioaccessibility. The results highlighted that BPS was available at the end of the digestion process in the range of 50-80%, and was susceptible to absorption at the intestinal level. The effect of pH was not significant as a single factor. The presence of enzymes slightly decreased the bioaccessibility of BPS in the intestinal phase with gastric pH increase. Additionally, a soy drink reduced BPS bioaccessibility by up to 5% after oral intake. Finally, a few BPS degradation products were found in non-bioaccessible fractions at different pH values.

Application of chromatographic analysis for detecting components from polymeric can coatings and further determination in beverage samples

Major type of internal can coating used for food and beverages is made from epoxy resins, which contain among their components bisphenol A (BPA) or bisphenol A diglycidyl ether (BADGE). These components can be released and contaminate the food or beverage. There is no specific European legislation for coatings, but there is legislation on specific substances setting migration limits. Many investigations have paid attention to BPA due to its classification as endocrine disruptor, however, few studies are available concerning to other bisphenol analogues that have been used in the manufacture of these resins. To evaluate the presence of this family of compounds, ten cans of beverages were taken as study samples. Firstly, the type of coating was verified using an attenuated total reflectance-FTIR spectrometer to check the type of coating presents in most of the samples examined. A screening method was also performed to investigate potential volatiles from polymeric can coatings of beverages using Purge and Trap (P&T) technique coupled to gas chromatography with mass spectrometry detection (GC-MS). Moreover, a selective analytical method based on high performance liquid chromatography with fluorescence detection (HPLC-FLD) for the simultaneous identification and quantification of thirteen compounds including bisphenol analogues (BPA, BPB, BPC, BPE, BPF, BPG) and BADGEs (BADGE, BADGE.H₂O, BADGE.2H₂O, BADGE.HCl, BADGE.2HCl, BADGE.H2O.HCl, cyclo-di-BADGE) in the polymeric can coatings and in the beverage samples was applied. In addition, a liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) method was optimized for confirmation purposes. The method showed an adequate linearity (R² >0.9994) and low detection levels down to 5 µg/L. Cyclo-di-BADGE was detected in all extracts of polymeric coatings. The concentrations ranged from 0.004 to 0.60 mg/dm². No detectable amounts of bisphenol related compounds were found in any of the beverage samples at levels that may pose a risk to human health, suggesting a low intake of bisphenols from beverages.

Competitive plasmonic biomimetic enzyme-linked immunosorbent assay for sensitive detection of bisphenol A

A plasmonic biomimetic enzyme-linked immunosorbent assay (PBELISA) method was developed for ultrasensitive and on-site visual detection of bisphenol A (BPA). The PBELISA was an enzyme-linked immunoassay using molecularly imprinted polymer (MIP) film as biomimetic antibody combined with catalase (CAT)-mediated growth of plasmonic gold nanoparticles (AuNPs). With the BPA concentration increased, a distinguished color change was observed from colorless to blue and then red. Therefore, the proposed method could be employed with naked-eye observation to detect BPA with visual limit of detection (LOD) of 40 pg/mL. For quantitative analysis, this method also exhibited a good dynamic linear response to the logarithmic BPA concentrations ranged from 10 pg/mL to 1.024 × 10⁴ pg/mL with a correlation coefficient of R² = 0.9922 and LOD of 6.20 pg/mL. The recovery rates in tap water, milk and orange juice ranged from 91.83% to 107.39%. In brief, the developed PBELISA method is sensitive, cost-effective and easy-to-use for BPA detection.

Novel computer-assisted separation prediction strategy for online-enrichment-HPLC-FLD in simultaneous monitoring of bisphenols in children's water bottles

An on-line enrichment-liquid chromatography-fluorescence detection (LC-FD) method was developed for simultaneous determination of nine bisphenols (BPs). In this process, we predicted the separation based on an in-house developed software allowing for calculating both retention time (t_R) and half-peak width (W_1/2) of the solute by mobile phase fraction (φ) under gradient conditions. The proposed strategy was applied to separation prediction of BPs with high accuracy. Under the optimized conditions, good linearity was obtained with the correlation coefficients (R²) ranging from 0.998 to 1.000. The recoveries in spiked samples were 91.3-110.7% with the intra-day and inter-day relative standard deviation ranging 0.4-9.6% and 0.5-10.2%, respectively. The limits of detection and quantification were 0.13-66.7 ng L^-1 and 0.40-200 ng L^-1. The developed approach was used to monitor the nine BPs in 28 children's water bottles. The developed method provides an effective way for monitoring bisphenols in other similar matrix.

Recent Trends in the Analysis of Chemical Contaminants in Beverages

Chemical contaminants should not be present in beverages for human consumption, but could eventually be ingested by consumers as they may appear naturally from the environment or be produced by anthropogenic sources. These contaminants could belong to many different chemical sources, including heavy metals, amines, bisphenols, phthalates, pesticides, perfluorinated compounds, inks, ethyl carbamate, and others. It is well known that these hazardous chemicals in beverages can represent a severe threat by the potential risk of generating diseases to humans if no strict quality control is applied during beverages processing. This review compiles the most updated knowledge of the presence of potential contaminants in various types of beverages (both alcoholic and non-alcoholic), as well as in their containers, to prevent undesired migration. Special attention is given to the extraction and pre-concentration techniques applied to these samples, as well as to the analytical techniques necessary for the determination of chemicals with a potential contaminant effect. Finally, an overview of the current legislation is carried out, as well as future trends of research in this field.

GC-MS Screening for the Identification of Potential Migrants Present in Polymeric Coatings of Food Cans

The coatings used in cans can release complex chemical mixtures into foodstuffs. Therefore, it is important to develop analytical methods for the identification of these potential migrant compounds in packaged food to guarantee the compliance with European food packaging legislation and ensure consumer safety. In the present work, the type of coating in a total of twelve cans collected in Santiago de Compostela (Spain) were evaluated using an ATR (attenuated total reflectance)-FTIR spectrometer. These samples were analysed after extraction with acetonitrile in order to identify potential migrants through a screening method by gas chromatography coupled to mass spectrometry (GC-MS). A total of forty-seven volatile and semi-volatile compounds were identified in these samples, including plasticizers, photoinitiators, antioxidants, lubricants, etc. Then, in a second step, a targeted analysis was carried out for the simultaneous determination of 13 compounds, including bisphenols (BPA, BPB, BPC, BPE, BPF, BPG) and BADGEs (BADGE, BADGE.H₂O, BADGE.2H₂O, BADGE.HCl, BADGE.2HCl, BADGE.H₂O.HCl, cyclo-di-BADGE) by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) with atmospheric pressure chemical ionisation (APCI) source. Among all the bisphenols analysed, only the bisphenol A was detected in four samples; while cyclo-di-BADGE was the predominant compound detected in all the samples analysed.

Magnetic nitrogen-doped reduced graphene oxide as a novel magnetic solid-phase extraction adsorbent for the separation of bisphenol endocrine disruptors in carbonated beverages

A novel magnetic nitrogen-doped reduced graphene oxide (Fe₃O₄@N-RGO) had been fabricated for the first time on the basis of a simple solvothermal method and then was successfully applied to extract four bisphenol endocrine disruptors (bisphenol A, bisphenol B, bisphenol F and bisphenol AP) in carbonated beverages coupled with high performance liquid chromatography (HPLC). The as-prepared Fe₃O₄@N-RGO was characterized by transmission electron microscopy (TEM), Brunner-Emmet-Teller (BET), X-ray diffraction (XRD), X-ray photoelectron spectrometer (XPS) and vibrating sample magnetometer (VSM). The introduction of nitrogen atoms not only made the wrinkle level of N-RGO increased, but also retarded the irreversible aggregation of graphene sheets. Compared with Fe₃O₄@RGO, Fe₃O₄@N-RGO owned larger specific surface area and more adsorption sites. Hence, Fe₃O₄@N-RGO showed excellent extraction efficiency toward bisphenol endocrine disruptors. The analytical parameters influencing the extraction efficiency were optimized in detail. Under the optimal conditions, a satisfactory performance was obtained. The calibration lines were linear over the concentration in the range of 0.4-1000 μg L^-1 with determination coefficients (r²) between 0.9976 and 0.9996. The limits of detection (LOD) ranged from 0.1 μg L^-1 to 0.2 μg L^-1. The recoveries varied from 86.52% to 101.47% with relative standard deviations (RSDs) less than 8.59%. Overall, the proposed method was an efficient pretreatment and enrichment procedure and could be successfully applied for selective extraction and determination of bisphenol endocrine disruptors in complex matrices.

Validated chemometrics-assisted spectrophotometric methods for simultaneous determination of bisphenol-A-diglycidyl ether and some of its reaction products in canned foods in the Egyptian market

Two multivariate calibration methods, namely principal component regression (PCR) and partial least squares (PLS-2) have been developed, validated and compared for the simultaneous determination of bisphenol-A-diglycidyl ether (BADGE) and some of its reaction products, including BADGE·HCl·H₂O, BADGE·H₂O and BADGE·2HCl. Chemometrics allowed rapid, accurate and precise simultaneous quantification of the analytes of interest which was not possible by other spectrophotometric methods due to their severe spectral overlap. PCR and PLS-2 techniques successfully quantified BADGE, BADGE·HCl·H₂O, BADGE·H₂O and BADGE·2HCl in the ranges of 1.4-3.4, 1-5, 1-4.2 and 1-7 μg mL^-1, respectively. The constructed models were validated according to the International Conference on Harmonization guidelines and successfully applied for the determination of these compounds in pure form, laboratory prepared mixtures and in various types of canned foods following the limits and regulations of the European Union (EU) where satisfactory recovery results were obtained.

Cytotoxicity of seven bisphenol analogues compared to bisphenol A and relationships with membrane affinity data

Bisphenol A (BPA) is a chemical used in numerous industrial applications. Due to its well ascertained toxicity as endocrine disruptor, industries have started to replace it with other bisphenols whose alleged greater safety is scarcely supported by literature studies. In this study, the toxicity of seven BPA analogues was evaluated using both in silico and in vitro techniques, as compared to BPA toxicity. Furthermore, their affinity indexes for phospholipids (i.e. phospholipophilicity) were determined by immobilized artificial membrane liquid chromatography (IAM-LC) and possible relationships with in vitro toxic activity were also investigated. The results on four different cell cultures yielded similar ranking of toxicity for the bisphenols considered, with IC₅₀ values confirming their poor acute toxicity. As compared to BPA, bisphenol AF, bisphenol B, bisphenol M, and bisphenol A diglycidyl ether resulted more toxic, while bisphenol S, bisphenol F and bisphenol E were found as the less toxic congeners. These results are partly consistent with the scale of phospholipid affinity showing that toxicity increases at increasing membrane affinity. Therefore, phospholipophilicity determination can be assumed as a useful preliminary tool to select less toxic congeners to surrogate BPA in industrial applications.

Investigation of nanoscale zerovalent iron-based magnetic and thermal dual-responsive composite materials for the removal and detection of phenols

In this study, well-defined magnetic and thermal dual-responsive nanomaterials were synthesized, which contained ultrafine core-shell Fe@SiO₂ nanoparticles as magnetic core and poly(N-isopropylacrylamide) (PNIPAM) as thermosensitive outer shell. The fabricated nanoparticles were characterized and investigated for the adsorption of four phenolic compounds, including bisphenol A (BPA), tetrabromobisphenol A (TBBPA), 4-tert-octylphenol (4-OP) and 4-n-nonylphenol (4-NP). The experimental results demonstrated that the excellent adsorption rates were attributed to hydrophobic effect, hydrogen-bonding interaction, and electrostatic attraction. The adsorption process followed pseudo-second-order kinetics model and nonlinear isotherms, indicating heterogeneous adsorption process. The adsorption efficiency of 4-NP using Fe@SiO₂@PNIPAM was more than 90% under optimized condition within 2 h. The determined maximum adsorption amounts of BPA, TBBPA, 4-OP and 4-NP were 2.43, 6.83, 24.75, and 49.34 mg g^-1, respectively. Meanwhile, a magnetic solid phase extraction (MSPE) method with Fe@SiO₂@PNIPAM was established to determine these four compounds simultaneously. Under the optimal conditions, the linearity ranges were in the range of 2-200, 2-300, 2-100 and 2-100 μg L^-1 for BPA, 4-OP, TBBPA, and 4-NP, respectively, and the detection limits were in the range of 0.58-0.76 μg L^-1, respectively. The applicability of the proposed method was evaluated by analyzing three fresh water samples, and satisfactory spiked recoveries in the range 70.9-119.9% were achieved. It was proved that these adsorbents could be easily collected and recycled owing to the appropriate magnetism. The results also demonstrated that the as-prepared adsorbents had promising potential in the enrichment and analysis of detrimental organic pollutants from water.