Comparing d-SPE Sorbents of the QuEChERS Extraction Method and EMR-Lipid for the Determination of Polycyclic Aromatic Hydrocarbons (PAH4) in Food of Animal and Plant Origin

Benzo (a) pyrene in infant foods: a systematic review, meta-analysis, and health risk assessment

Exposure of infants to chemicals during their development will have major effects on their health. One of the major exposures of infants to chemicals is through their food. The main structure of infant food is milk, which is high in fat. There is a possibility of accumulation of environmental pollution, including benzo (a) pyrene (BaP). In this systematic review, the amount of BaP in infant milk was surveyed for this purpose. The chosen keywords were: benzo (a) pyrene, BaP, Infant formula, dried milk, powdered milk, and baby food. A total of 46 manuscripts were found in the scientific database. After initial screening and quality assessment, 12 articles were selected for extraction of data. By meta-analysis, the total estimate of BaP in baby food was calculated to be 0.078 ± 0.006 μg/kg. Estimation of daily intake (EDI) and Hazard Quotient (HQ) for noncarcinogenic risk and Margin of exposure (MOE) for carcinogenic risk were also calculated for three age groups 0-6 months, 6-12 months, and 1-3 years. HQ was lower than 1 and MOE was more than 10,000 for three age groups. Therefore, there is no potential carcinogenic and non-carcinogenic risk for infant health.

A review of food contamination with nitrated and oxygenated polycyclic aromatic hydrocarbons: toxicity, analysis, occurrence, and risk assessment

Prolonged exposure to polycyclic aromatic hydrocarbons (PAHs) and their derivatives, particularly nitrated polycyclic aromatic hydrocarbons (NPAHs) and oxygenated polycyclic aromatic hydrocarbons (OPAHs), can result in adverse health effects and may carry higher toxicity risks compared to PAHs alone. Various extraction methods have been utilized for PAHs derivatives from food samples. The analytes are then analyzed using gas chromatography/mass spectrometry and high-performance liquid chromatography techniques. PAHs derivatives are increasingly being detected in the environment, prompting scrutiny from numerous researchers. Similarly, their presence in food is becoming a significant concern. The elevated levels of PAH derivatives found in smoked food may result in detrimental dietary exposure and pose potential health hazards. Furthermore, investigating the level of exposure to these contaminants in food is imperative, as their consumption by humans carries inherent risks. Consequently, this review concentrates on the toxicity, analysis, occurrence, and risk evaluation of NPAHs and OPAHs present in food sources.

Ecotoxicological and health risks associated with sediment-bound polycyclic aromatic hydrocarbons in peri-urban closed and open coastal lagoons

Coastal urbanisation has ramifications for the sustainable development of developing nations. There are often unquantified ecological and health risks associated with urbanisation. Sixteen polycyclic aromatic hydrocarbons (PAHs) were analysed in surface sediment from three peri-urban coastal lagoons in southern Ghana. We found significant spatial variations of sediment PAHs. These variations were attributed to physiography of the lagoons and diverse anthropogenic activities surrounding them. Total PAHs ranged from 20.81 to 24,801.38 μg/kg (dry weight), underscoring a low to very high pollution level. Diagnostic ratios revealed both pyrogenic and petrogenic origins. Over 50 % of individual PAHs were of moderate ecological risk to benthic organisms, and cancer risk to humans was above the World Health Organisation's recommended safety limit (1 × 10-6). These ecological and health risks should be wake-up call for a more integrated urban planning approach to coastal urbanisation as coastal communities largely depend on natural ecosystems for food and livelihood opportunities.

Advances in sample preparation methods for pesticide residue analysis in medicinal plants: A focus on Nepal

Medicinal plant safety is a rising challenge worldwide due to the continued overuse of pesticides to their maximum residue limits. Due to the high demand for medicinal plants, their production is being increased and sometimes protected by pesticide use. The analysis of these residues requires robust analytical methods to ensure the safety and quality of medicinal plants. Developing effective sample preparation for detecting pesticides is challenging, due to their diverse natures, classes, and physico-chemical characteristics. Hence, existing techniques and strategies are needed to improve the reliability of the results. The review discusses the current state of sample preparation techniques, analytical methods, and instrumental technologies employed in pesticide residue analysis in medicinal plants. It highlights the challenges, limitations, and advancements in the field, providing insights into the analytical strategies used to detect and quantify pesticide residues. Reliable, accessible, affordable, and high-resolution analytical procedures are essential to ensure that pesticide levels in medicinal plants are effectively regulated. By understanding the complexities of pesticide residue analysis in medicinal plants, this review article aims to support the conservation of medicinal plant resources, promote public health, and contribute to the development of sustainable strategies for ensuring the safety and quality of medicinal plants in Nepal. The findings of this review will benefit researchers, policymakers, and stakeholders involved in the conservation of medicinal plant resources and the promotion of public health.

Phytoremediation of pollutants in oil-contaminated soils by Alhagi camelorum: evaluation and modeling

Phytoremediation is a cost-effective and environmentally friendly method, offering a suitable alternative to chemical and physical approaches for the removal of pollutants from soil. This research explored the phytoremediation potential of Alhagi camelorum, a plant species, for total petroleum hydrocarbons (TPHs) and heavy metals (HMs), specifically lead (Pb), chromium (Cr), nickel (Ni), and cadmium (Cd), in oil-contaminated soil. A field-scale study spanning six months was conducted, involving the cultivation of A. camelorum seeds in a nursery and subsequent transplantation of seedlings onto prepared soil plots. Control plots, devoid of any plants, were also incorporated for comparison. Soil samples were analyzed throughout the study period using inductively coupled plasma-optical emission spectroscopy (ICP‒OES) for HMs and gas chromatography‒mass spectrometry (GC‒MS) for TPHs. The results showed that after six months, the average removal percentage was 53.6 ± 2.8% for TPHs and varying percentages observed for the HMs (Pb: 50 ± 2.1%, Cr: 47.6 ± 2.5%, Ni: 48.1 ± 1.6%, and Cd: 45.4 ± 3.5%). The upward trajectory in the population of heterotrophic bacteria and the level of microbial respiration, in contrast to the control plots, suggests that the presence of the plant plays a significant role in promoting soil microbial growth (P < 0.05). Moreover, kinetic rate models were examined to assess the rate of pollutant removal. The coefficient of determination consistently aligned with the first-order kinetic rate model for all the mentioned pollutants (R2 > 0.8). These results collectively suggest that phytoremediation employing A. camelorum can effectively reduce pollutants in oil-contaminated soils.

Simultaneous determination of 27 pesticides in corn and cow matrices by ultra-performance liquid chromatography-tandem mass spectrometry

In this paper, we developed a sensitive UPLC-MS/MS method to determine pesticide residues in plant matrices (corn, fresh corn, fresh corn stover, old corn stover, and corn silage) and animal matrices (beef, fat, milk, milk fat, kidney, liver, and cow stomach) quantitatively. Twenty-seven pesticides were extracted with acetonitrile from all plant and animal matrices separately and purified with a mixture of primary secondary amine (PSA) and graphitized carbon black (GCB) or octadecylsilane (C18). The average recoveries of these compounds ranged from 60.7% to 118.2%, and the relative standard deviations were less than 20.0%. The limit of quantitation for all compounds was 0.01 mg kg-1 (for cyhalothrin and beta cypermethrin the LOQ was 0.02 mg kg-1). The establishment of multi-residue analysis methods for a variety of matrices can be used as a database for future method research. The results of this study are essential for calculating the transfer of pesticide residues from feed to animal products and for monitoring food safety, which will protect people's health and safety.

A new approach to prediction riboflavin absorbance using imprinted polymer and ensemble machine learning algorithms

The molecularly imprinted polymer (MIP) is useful for measuring the amount of riboflavin (vitamin B2), in various samples using UV/Vis instruments. The practical optimization of the MIP synthesis conditions has a number of drawbacks, like the need to spend money, the need to spend time, the use of the compounds that cause contamination, needing laboratory equipment and tools. Using machine learning (ML) to predict the amount of riboflavin absorbance is a creative solution to overcome the problems and shortcomings of optimizing polymer synthesis conditions. In fact, by using the model without needing real work in the laboratory, the optimum laboratory conditions are determined, and as a result the maximized absorption of the riboflavin is obtained. In this paper, MIP was synthesized for selective extraction of the riboflavin, and UV/Vis spectrophotometry was used to quantitatively measure riboflavin absorbance. Various factors affect the performance of the polymer. The effect of six important factors, including the molar ratio of the template, the molar ratio of monomer, the molar ratio of cross-linker, loading time, stirring rate, and pH, were investigated. Then, using ensemble ML algorithms, like gradient boosting (GB), extra trees (ET), random forest (RF), and Ada boost (Ada) algorithms, an accurate model was created to predict the riboflavin absorption. Also, the mutual information feature selection method was used to determine the important features. The results of using feature selection method was shown that variables such as the molar ratio of the template, the molar ratio of the monomer, and the molar ratio of the cross-linker had a high effect on riboflavin absorbance. The GB and Ada boost algorithms performed better than ET and RF algorithms. After tuning the n-estimator hyper parameter (n-estimator = 300), the GB algorithm was shown an excellent performance in predicting the absorbance of riboflavin and the maximum R²-scoring of the model was obtained at 0.965995, the minimum of the mean absolute error (MAE), and mean square error (MSE) of the model respectively were obtained -0.003711 and -0.000078. Therefore, by using the proposed model, it is possible to predict riboflavin absorbance theoretically, and with high accuracy by changing the inputs of model, and using the model instead of working in the lab saves time, money, chemical compounds, and lab ware.

Multi-residue method to determine selected personal care products from five classes in fish based on miniaturized matrix solid-phase dispersion and solid-phase microextraction coupled to gas chromatography-mass spectrometry

A method featuring matrix solid-phase dispersion combined with solid-phase microextraction coupled to gas chromatography-mass spectrometry was developed to determine parabens, musks, antimicrobials, UV filters, and an insect repellent in fish. Optimization and validation of the method was carried out on tilapia and salmon samples. Acceptable linearity (R² > 0.97), precision (relative standard deviations < 13 %) and accuracy (recovery > 80 %) at two concentration levels for all analytes were obtained using both matrices. The limits of detection ranged from 0.01 to 1.01 μg g^-1 (wet weight) for all analytes except for methyl paraben. The SPME Arrow format was applied to increase the sensitivity of the method, and yielded detection limits more than ten times lower than those achieved with traditional SPME. The miniaturized method can be applied to various fish species, regardless of their lipid content, and represents a useful tool for quality control and food safety purposes.

Polycyclic aromatic hydrocarbons in spices and dried herbs and associated risk for the Belgian population

A total of 120 spices and herbs bought on the Belgian market have been analysed for occurrence of the four EU regulated polycyclic aromatic hydrocarbons (ΣPAH4). Samples were sorted in three groups according to their use: traditional spices, exotic spices, and herbs. Benzo[a]pyrene has been detected in 56% of samples, while ΣPAH4 were found in 96% of samples. ΣPAH4 were evenly distributed among the three groups with a median content of 7.2 for traditional spices, 5.5 for exotic spices and 6.0 µg kg^-1 for herbs. According to the EU legislation, three samples were exceeding maximal limits, with a maximum ΣPAH4 content of 164 µg kg^-1. The ΣPAH4 dietary intake has been estimated at 1.4 and 27.8 ng day^-1 for average and high consumption, respectively. The risk for the consumer was evaluated by using the margin of exposure (MOE). In all cases, MOE were >20 000, indicating a low concern for the population.

Application of the QuEChERS Strategy as a Useful Sample Preparation Tool for the Multiresidue Determination of Pyrrolizidine Alkaloids in Food and Feed Samples: A Critical Overview

The identification of concerning high levels of pyrrolizidine alkaloids (PAs) in a wide variety of food products has raised the occurrence of these natural toxins as one of the main current issues of the food safety field. Consequently, a regulation with maximum concentration levels of these alkaloids has recently been published to monitor their occurrence in several foodstuffs. According to legislation, the analytical methodologies developed for their determination must include multiresidue extractions with high selectivity and sensitivity, as a set of 21 + 14 PAs should be simultaneously monitored. However, the multiresidue extraction of these alkaloids is a difficult task due to the high complexity of food and feed samples. Accordingly, although solid-phase extraction is still the technique most widely used for sample preparation, the QuEChERS method can be a suitable alternative for the simultaneous determination of multiple analytes, providing green extraction and clean-up of samples in a quick and cost-effective way. Hence, this review proposes an overview about the QuEChERS concept and its evolution through different modifications that have broadened its applicability over time, focusing mainly on its application regarding the determination of PAs in food and feed, including the revision of published works within the last 11 years.

Determination of Polycyclic Aromatic Hydrocarbons in Traditional Chinese Medicine Raw Material, Extracts, and Health Food Products

The four polycyclic aromatic hydrocarbon markers (PAH4) of benzo[a]anthracene (BaA), chrysene (Chr), benzo[b]fluoranthene (BbF), and benzo[a]pyrene (BaP) are indicators showing polycyclic aromatic hydrocarbon (PAH) contamination levels in Chinese medicine raw materials (CMRMs), extracts and health food products; Samples of herbal medicine, herbal extracts, and food supplements were extracted with n-hexane, then cleaned up sequentially on Florisil and EUPAH solid-phase extraction (SPE) columns. A gas chromatography-mass spectrometry method for the determination of four polycyclic aromatic hydrocarbon markers in Chinese medicine raw material, extracts, and health food products was established; In spiked-recovery experiments, the average recovery was about 78.6-107.6% with a precision of 2.3-10.5%. The limit of quantification (LOQ) and limit of detection (LOD) of the PAH4 markers in this method were 2.0 μg/kg and 0.7 μg/kg, respectively. When the developed method was utilized to determine PAH4 contents in 12 locally available health food products, 3 samples contained over 10.0 μg/kg BaP, and 5 samples contained over 50.0 μg/kg PAH4. The European Union (EU) limits for BaP and PAH4 are 10 and 50.0 μg/kg, respectively; therefore, more attention must be drawn to the exposure risk of BaP and PAH4 in CMRMs, their extracts, and health food products. According to the risk assessment based on the Margin of Exposure (MOE) method, it is recognized that the products mentioned in this study pose a low risk.

Critical Assessment of Clean-Up Techniques Employed in Simultaneous Analysis of Persistent Organic Pollutants and Polycyclic Aromatic Hydrocarbons in Fatty Samples

Interference of residual lipids is a very common problem in ultratrace analysis of contaminants in fatty matrices. Therefore, quick and effective clean-up techniques applicable to multiple groups of analytes are much needed. Cartridge and dispersive solid-phase extraction (SPE and dSPE) are often used for this purpose. In this context, we evaluated the lipid clean-up efficiency and performance of four commonly used sorbents—silica, C18, Z-Sep, and EMR-lipid—for the determination of organic pollutants in fatty fish samples (10%) extracted using ethyl acetate or the QuEChERS method. Namely, 17 polychlorinated biphenyls (PCBs), 22 organochlorine pesticides (OCPs), 13 brominated flame retardants (BFRs), 19 per- and polyfluoroalkyl substances (PFAS), and 16 polycyclic aromatic hydrocarbons (PAHs) were determined in this study. The clean-up efficiency was evaluated by direct analysis in real time coupled with time-of-flight mass spectrometry (DART-HRMS). The triacylglycerols (TAGs) content in the purified extracts were significantly reduced. The EMR-lipid sorbent was the most efficient of the dSPE sorbents used for the determination of POPs and PAHs in this study. The recoveries of the POPs and PAHs obtained by the validated QuEChERS method followed by the dSPE EMR-lipid sorbent ranged between 59 and 120%, with repeatabilities ranging between 2 and 23% and LOQs ranging between 0.02 and 1.50 µg·kg⁻¹.

Simultaneous determination of pesticides from soils: a comparison between QuEChERS extraction and Dutch mini-Luke extraction methods

The expanding nature of the agricultural sector has fuelled the intensification of plant protection products usage, including pesticides. These pesticides may persist in soils, necessitating their accurate determination in a variety of soil types. However, due to their complex nature, the effective extraction of pesticide residues from soil matrices can present challenges to pesticide detection and quantification. This research compared two well-known extraction methods, QuEChERS and Dutch mini-Luke, by assessing their specificity, sensitivity, accuracy, precision and reproducibility in extracting seven distinct pesticides with a range of chemico-physical characteristics from Irish soils. The HPLC-UV conditions were optimised to separate the seven pesticides, and it was shown that both extraction methods successfully extracted neonicotinoids with recovery values ranging between 85 and 115%. Fluroxypyr and prothioconazole could not be efficiently extracted using QuEChERS, however, the recovery values of both the analytes ranged between 59 and 117% using Dutch mini-Luke. Furthermore, with the exception of prothioconazole using Dutch mini-Luke, both extraction methods resulted in reproducibility and precision values below or equal to 20%. Lastly, Dutch mini-Luke is noted to have a lower matrix effect than QuEChERS, except for prothioconazole. The comparison results showed that Dutch mini-Luke resulted in superior method sensitivity, better recovery, and lower matrix effect towards most investigated analytes and was the only extraction technique that successfully extracted all pesticides analysed in soil matrices.

Simultaneous trace analysis of 10 benzophenone-type ultraviolet filters in fish through liquid chromatography-tandem mass spectrometry

We developed and validated a trace analytical method for the simultaneous determination of 10 benzophenone (BP)-type ultraviolet filters (BPs; BP, BP-1, BP-2, BP-3, BP-8, 2-hydroxybenzophenone [2-OHBP], 4-hydroxybenzophenone [4-OHBP], 4-methylbenzophenone [4-MBP], methyl-2-benzoylbenzoate [M2BB], and 4-benzoylbiphenyl [PBZ]) to analyze BPs in 110 commercial fish samples. The quick, easy, cheap, effective, rugged, and safe (QuEChERS) technique coupled with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) was employed. The developed method exhibited satisfactory linearity (R² > 0.993), favorable precision with intraday and interday relative standard deviation ranges of 1.0%-26.6% and 2.3%-29.3%, respectively, and a limit of detection ranging from 0.001 to 0.1 ng/g. BP and 2-OHBP were detected in 100% of the samples; BP-3, 4-OHBP, PBZ, and 4-MBP were detected in >70% of the samples; M2BB was detected in 33% of the samples, and BP-2 and BP-8 were not detected. Higher mean (minimum-maximum) levels of 2-OHBP and BP were found in fish samples with low lipid content, ranging from 18 (1.1-218.3) to 10 (0.5-45.4) ng/g, and those with high lipid content, ranging from 22 (1.5-76.4) to 9.6 (5.2-18.5) ng/g; low levels of the remaining six BPs were found, ranging from 0.01 to 0.9 ng/g. The mean 2-OHBP levels were 21.3, 14.4, and 30.2 ng/g for fish samples obtained from aquaculture in Taiwan, the wild in Taiwan, and different countries, respectively, with levels up to 218.3 ng/g (field eel) for a sample from Indonesia. BPs may not pose a health risk to Taiwanese adults through the consumption of fish; however, additional studies are needed to examine the risk that these contaminants may pose to ecosystems and human health.

Effective and rugged analysis of glyphosate, glufosinate, and metabolites in Tenebrio molitor larva (mealworms) using liquid chromatography tandem mass spectrometry

Tenebrio molitor larva (mealworms) has recently attracted attention as a protein source for food and feed. The larva is generally fed with wheat bran, which can be possibly contaminated with glyphosate. To establish food safe standards, a rugged and effective analytical method for glyphosate, aminomethylphosphonic acid, glufosinate, and their metabolites including 3-methylphosphinico-propionic acid, and N-acetyl glufosinate, in mealworms was optimized using liquid chromatography tandem mass spectrometry. An anionic polar pesticide column was used due to its high suitability for glyphosate. Acidified water and acetonitrile were used to extract the target compounds without contribution from various fatty and pigment interferences derived from brownish insects. Seven different clean-up procedures ((1) 50 mg C18 (2) 20 mg C18/Z-sep (3) PRiME hydrophilic-lipophilic balance (HLB) cartridge (4) 75 mg Z-sep, (5) 75 mg Z-sep+, (6) EMR-lipid cartridge, and (7) 50 mg ENVI-Carb) were compared. Due to its simplicity and cost-effectiveness, PRiME HLB was selected for clean-up. The recoveries of the target compounds were ranged from 86 to 96% with < 20% relative standard deviations. Therefore, this simple and effective method can be applied for the two pesticides and their metabolites in other edible insects or high-fat matrices.

Polycyclic Aromatic Hydrocarbons in Foods: Biological Effects, Legislation, Occurrence, Analytical Methods, and Strategies to Reduce Their Formation

Polycyclic aromatic hydrocarbons (PAHs) are chemical compounds comprised of carbon and hydrogen molecules in a cyclic arrangement. PAHs are associated with risks to human health, especially carcinogenesis. One form of exposure to these compounds is through ingestion of contaminated food, which can occur during preparation and processing involving high temperatures (e.g., grilling, smoking, toasting, roasting, and frying) as well as through PAHs present in the soil, air, and water (i.e., environmental pollution). Differently from changes caused by microbiological characteristics and lipid oxidation, consumers cannot sensorially perceive PAH contamination in food products, thereby hindering their ability to reject these foods. Herein, the occurrence and biological effects of PAHs were comprehensively explored, as well as analytical methods to monitor their levels, legislations, and strategies to reduce their generation in food products. This review updates the current knowledge and addresses recent regulation changes concerning the widespread PAHs contamination in several types of food, often surpassing the concentration limits deemed acceptable by current legislations. Therefore, effective measures involving different food processing strategies are needed to prevent and reduce PAHs contamination, thereby decreasing human exposure and detrimental health effects. Furthermore, gaps in literature have been addressed to provide a basis for future studies.

Persistent organic pollutants (PCBs and PCDD/Fs), PAHs, and plasticizers in spices, herbs, and tea - A review of chromatographic methods from the last decade (2010-2020)

Edible and highly demanded plant-derived products such as herbs, spices, and tea may be subjected to exogenous contamination of well-known chemical hazards such as persistent organic pollutants (POPs), and emerging ones such as plasticizers, affecting negatively the safety of these food commodities. This fact has led to the increasing analysis of exogenous compounds including priority POPs such as polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs), as well as highly persistent polycyclic aromatic hydrocarbons (PAHs). Currently, plasticizer residues are also considered an emerging issue because of the extensive use in food packaging and potential migration into foodstuffs. In this review, the studies published from 2010 to 2020 were discussed, including the main extraction methods applied for these contaminants from herbs, spices, and tea, and it was revealed the trend toward the use of less solvent-consuming and time-effective methods. Chromatographic methods were also described, which were mainly combined with detection techniques such as classical or mass spectrometry (MS) detection. Finally, a comprehensive overview of the occurrence of these selected exogenous compounds was presented in the studied matrices, showing that their monitoring should be further investigated to ensure food safety of highly consumed condiments and tea.

Z-sep+ based QuEChERS technique for the pre-concentration of malathion pesticide in fruits followed by analysis using UV-Vis spectroscopy

In this work, the concentrations of malathion in fruits were determined using UV-Vis spectrophotometry prior to pre-concentration using QuEChERS. The Z-sep⁺/PSA sorbent combination was used for the d-SPE clean-up and extraction was done using acetonitrile during QuEChERS. The absorbance of malathion was measured using a UV-Vis spectrophotometer at a wavelength of 415 nm. The QuEChERS parameters, which included type and volume of extraction solvent, type and mass of sorbents, and centrifugation rate, were optimised prior to application of the developed method to real fruit samples. The linear range was from 0.1 to 0.9 mg kg^-1 while the coefficient of determination (R²) was 0.9999. The limit of detection (LOD) for malathion was found to be 0.017 mg kg^-1 and the limit of quantification was 0.05 mg kg^-1. Orange samples were found to have no malathion residues when the developed method was applied to them while the concentrations of malathion in apple and pear samples were 0.07 mg kg^-1 and 0.09 mg kg^-1 respectively.

Polycyclic aromatic compounds (PACs) in the Canadian environment: A review of sampling techniques, strategies and instrumentation

A wide variety of sampling techniques and strategies are needed to analyze polycyclic aromatic compounds (PACs) and interpret their distributions in various environmental media (i.e., air, water, snow, soils, sediments, peat and biological material). In this review, we provide a summary of commonly employed sampling methods and strategies, as well as a discussion of routine and innovative approaches used to quantify and characterize PACs in frequently targeted environmental samples, with specific examples and applications in Canadian investigations. The pros and cons of different analytical techniques, including gas chromatography - flame ionization detection (GC-FID), GC low-resolution mass spectrometry (GC-LRMS), high performance liquid chromatography (HPLC) with ultraviolet, fluorescence or MS detection, GC high-resolution MS (GC-HRMS) and compound-specific stable (δ¹³C, δ²H) and radiocarbon (Δ¹⁴C) isotope analysis are considered. Using as an example research carried out in Canada's Athabasca oil sands region (AOSR), where alkylated polycyclic aromatic hydrocarbons and sulfur-containing dibenzothiophenes are frequently targeted, the need to move beyond the standard list of sixteen EPA priority PAHs and for adoption of an AOSR bitumen PAC reference standard are highlighted.

Optimization of a Simplified and Effective Analytical Method of Pesticide Residues in Mealworms (Tenebrio molitor Larvae) Combined with GC-MS/MS and LC-MS/MS

An effective analytical method was optimized for residues including chlorpyrifos-methyl, deltamethrin, fenoxanil, thiobencarb and fludioxonil in mealworms, the larval form of Tenebrio molitor. They are listed for pest control during wheat cultivation and can be found in wheat-bran feed for growing mealworms in South Korea. Analytes were extracted using acetonitrile and salt packet. Four clean-up methods ((1) MgSO₄ + 25 mg PSA + 25 mg C18; (2) MgSO₄ + 50 mg PSA + 50 mg C18; (3) EMR-lipid^TM tube; and (4) 10 mL n-hexane) were investigated and the method (1) was selected due to its robustness. Low-temperature precipitation of fat and proteins improved the recoveries. Recoveries from the Method (1) were satisfying with 70-120% with <20% relative SD at a spiking level of 0.01 mg/kg. With the simultaneous sample preparation, fenoxanil, thiobencarb and fludioxonil were analyzed by liquid chromatography tandem mass spectrometry (LC-MS/MS) and chlorpyrifos-methyl and deltamethrin by gas chromatography tandem mass spectrometry (GC-MS/MS). Quantification limits for LC-MS/MS and GC-MS/MS were 0.5 and 2.5 μg/L, respectively. No pesticides of interest were detected in 30 real samples collected across the nation. However, the data can be provided for establishing maximum residue limits for the pesticides in mealworms in response to the positive list system.

QuEChERS - Fundamentals, relevant improvements, applications and future trends

The Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method is a simple and straightforward extraction technique involving an initial partitioning followed by an extract clean-up using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS approach was developed for recovering pesticide residues from fruits and vegetables, but rapidly gained popularity in the comprehensive isolation of analytes from different matrices. According to PubMed, since its development in 2003 up to November 2018, about 1360 papers have been published reporting QuEChERS as extraction method. Several papers have reported different improvements and modifications to the original QuEChERS protocol to ensure more efficient extractions of pH-dependent analytes and to minimize the degradation of labile analytes. This analytical approach shows several advantages over traditional extraction techniques, requiring low sample and solvent volumes, as well as less time for sample preparation. Furthermore, most of the published studies show that the QuEChERS protocol provides higher recovery rate and a better analytical performance than conventional extraction procedures. This review proposes an updated overview of the most recent developments and applications of QuEChERS beyond its original application to pesticides, mycotoxins, veterinary drugs and pharmaceuticals, forensic analysis, drugs of abuse and environmental contaminants. Their pros and cons will be discussed, considering the factors influencing the extraction efficiency. Whenever possible, the performance of the QuEChERS is compared to other extraction approaches. In addition to the evolution of this technique, changes and improvements to the original method are discussed.