Nanoporous Carbon as the Solid-Phase Extraction Adsorbent for the Extraction of Endocrine Disrupting Chemicals from Juice Samples

Preparation of ionic porous polymers for extraction of four phenolic endocrine disrupting chemicals from fish and water samples

In this paper, series of ionic polymers were synthesized by crosslinking alkyl quaternary ammonium salts with 1,4-bis(chloromethyl)benzene. Among them, hyper-crosslinked polymer fabricated with dodecyl dimethyl benzyl ammonium chloride (HCP-DD) as monomer delivered superior adsorption performance for endocrine disrupting chemicals (EDCs). The adsorption mechanism mainly includes π-π stacking, hydrophobic and electrostatic interaction. With HCP-DD as solid phase extraction sorbent, a high performance liquid chromatography-diode array detection method was developed for the detection of four phenolic EDCs in water and fish samples. The detection limits of the method were 0.005-0.02 ng mL-1 for water samples and 3-30 ng g-1 for fish samples. The recoveries of EDCs in water samples and fish samples were 80-119% and 81.3-117% (relative standard deviations <4.4%), respectively. The study not only provides a route for preparation ionic porous polymers, but also highlights the applications of ionic polymers as efficient adsorbent to enrich organic pollutants.

Assessing dietary bisphenol A exposure among Koreans: comprehensive database construction and analysis using the Korea National Health and Nutrition Examination Survey

Bisphenol A (BPA) exposure primarily occurs through dietary intake. This study aimed to estimate the extent of dietary BPA exposure among Koreans. A thorough literature search was conducted to establish a BPA content database encompassing common foods consumed in Korea, including various food raw materials and processed food products. Dietary exposure levels were estimated by integrating the constructed BPA database with comprehensive nationwide 24 h-dietary recall datasets. The finding revealed that dietary BPA exposure was low for most Koreans, with a mean of 14.5 ng/kg bw/day, but was higher for preschool-age children (over 23 ng). Canned foods accounted for 9-36% of the total dietary exposure of the highest dietary exposure groups; while across all age groups, a considerable amount was derived from canned tuna, contribution of canned fruits and canned coffee (milk-containing) was high for preschool-age children and adults, respectively. Notably, for adults, a substantial proportion also stemmed from beer packaged in cans. While diet contributed over 80% of aggregate exposure for most age groups, preschool-age children experienced 60% exposure through diet due to additional exposure from indoor dust. Even at the high exposure scenario, aggregate BPA exposure levels remained lower than the current tolerable daily intake (TDI) set by the Korean agency (20 μg/kg bw/day). Nevertheless, most Koreans were exposed to BPA levels surpassing the strictest TDI (0.2 ng/kg bw/day) set by the European Food Safety Authority.

Synthesis of cyano and ionic dual-functional hypercrosslinked porous polymer for effective adsorption and detection of endocrine disrupting chemicals in milk matrix

Endocrine disrupting chemicals (EDCs) can interfere with the normal function of endocrine system, posing serious risk to human health. The monitoring of EDCs in foods is of great importance to ensure food security. Herein, a cyano and ionic dual-functionalized hypercrosslinked porous polymer (CN-iHCP) was designed and prepared for the first time through hyper-crosslink of 1-(4-cyanophenyl)imidazole and 1,4-bis(chloromethyl)benzene. The adsorption mechanism mainly involves electrostatic interaction, hydrogen bonding and π-π stacking interaction. A sensitive analytical method for simultaneous detection of the four phenolic EDCs was established by coupled CN-iHCP based solid-phase extraction with high performance liquid chromatography. Under optimal conditions, the target EDCs exhibited good linearity with coefficient r > 0.993 and high enrichment factors of 164-243. The detection limits (S/N = 3) of EDCs were 0.20-0.50 ng mL-1 for milk sample. The extraction recoveries for the spiked milk samples were in the range of 85.5%- 116.0%. This work not only highlights the CN-iHCP as a promising adsorbent to efficiently enrich EDCs and other pollutants, but also provides a new strategy for the functionalization of HCP for wide applications.

Synthesis of amine-functionalized magnetic porous organic polymers for effective extraction of phenolic endocrine disrupting chemicals

Amine-functionalized porous organic polymers (EDA-POP-PC and EDA-POP-BT) were prepared by post-modification of POP-PC and POP-BT with ethylenediamine (EDA) for the first time. The POP-PC and POP-BT were obtained through Friedel-Crafts acylation reaction of potassium tetraphenylborate with p-phthaloyl chloride (PC) and 1,3,5-benzenetricarbonyl trichloride (BT), respectively. The EDA-POPs exhibited superior adsorption capacity for phenolic endocrine disrupting chemicals (EDCs). After magnetically functionalization, the obtained M-EDA-POP-PC was employed as a magnetic adsorbent for enrichment of phenolic EDCs from real samples prior to high performance liquid chromatography-ultraviolet detection. The current strategy showed low detection limits (S/N = 3) of 0.02-0.07, 0.04-0.08 and 0.04-0.10 ng mL-1 for river water, white peach juice and lychee juice, respectively. The method recoveries were 81.7%-115% with relative standard deviations below 8.6%. The proposed strategy showed good practicality for sensitive determination of phenolic EDCs in real samples.

Carboxyl functionalized sorbent based solid-phase extraction for sensitive determination of endocrine disrupting chemicals in bottled water, juice and milk

Endocrine disrupting chemicals (EDCs) pose a serious threat to human health even at extremely low concentration. Three carboxyl functionalized porous polymers (PDA-DPBP, PTCDA-DPBP and ODPA-DPBP) were synthesized for the first time and employed as solid-phase extraction sorbent to enrich phenolic EDCs at trace level. Compared with PTCDA-DPBP, ODPA-DPBP and corresponding carboxyl-free counterpart (PC-DPBP), PDA-DPBP delivered superior enrichment efficiency for the phenolic EDCs, which can be ascribed to the strong hydrogen bonding, pore filling, hydrophobic interaction and π-π interaction between PDA-DPBP and phenolic EDCs. Coupled with high performance liquid chromatography, phenolic EDC residues in bottled water, juice and milk samples were enriched and determined. At the optimum conditions, the PDA-DPBP based method provided a good linear response in the range of 0.04-100ng mL-1 for bottled water, 0.07-100ng mL-1 for juice and 0.15-500ng mL-1 for milk samples. The detection limits (S/N=3) were 0.01-0.04, 0.02-0.06 and 0.05-0.10ng mL-1 for bottled water, juice and milk, respectively. The method recoveries were in the range from 81.6% to 116%, with RSDs ≤ 7.7%. This work provides an attractive and reliable alternative method for sensitive determination of phenolic EDCs.

[Adsorption characteristics of six bisphenol compounds on magnetic three-dimensional nitrogen-doped carbon nanomaterials and their use in effervescent reaction-assisted dispersive microextraction]

Herein, we successfully prepared magnetic Co/Ni-based N-doped 3D carbon nanotubes and graphene nanocomposites (CoNi@NGC) using a simple high-temperature calcination method. The CoNi@NGC nanocomposites were used as adsorbents to study their adsorption performances and underlying kinetic mechanisms for six types of bisphenol compounds (BPs) in water. They were also used as extractants, and acid-base effervescent tablets were used to enhance extractant dispersion with the aid of vigorous CO₂ bubbling. Thus, a novel pretreatment method was developed, denoted effervescent reaction-assisted dispersive solid-phase microextraction (ER-DSM), which was combined with high performance liquid chromatography-fluorescence detection (HPLC-FLD) to rapidly quantify trace-level BPs in several drinks. The morphology and structure of the CoNi@NGC adsorbent were characterized in detail using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), N₂ adsorption and desorption (BET-BJH), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM). The CoNi@NGC nanocomposites were successfully doped with N and exhibited large specific surface areas (109.42 m²/g), abundant pores, and strong magnetic properties (17.98 emu/g).Key parameters were rigorously optimized to maximize the adsorption performance of CoNi@NGC, including adsorbent dosage, solution pH, temperature, and time. Under the constant conditions of pH=7, 5 mg of CoNi@NGC, initial BP concentrations of 5 mg/L, and 5 min of shaking at 298 K, the adsorption percentages of bisphenol M (BPM) and bisphenol A (BPA) reached respective maxima of 99.01% and 98.21%. Remarkably, those of bisphenol Z (BPZ), BPA, and BPM reached almost 100% after 90 min. The adsorption between the BPs and CoNi@NGC was mainly governed by hydrogen bonds, electrostatic interactions, and π-π conjugation. The entire adsorption process was consistent with Freundlich adsorption and a quasi-second-order kinetic equation, representing spontaneous adsorption. Via integration with HPLC-FLD, ER-DSM was used to rapidly extract and analyze trace-level BPs in six types of boxed drinks. Critical factors were optimized individually, including the type of eluent and elution time and volume, which influenced the enrichment effect. Under the optimized extraction conditions (pH=7, 5 mg CoNi@NGC, elution with 2 mL acetone for 6 min), the limits of detection and quantification of the novel extraction method were 0.06-0.20 and 0.20-0.66 μg/L, respectively. The intra- and inter-day precisions spanned the ranges 1.44%-4.76% and 1.69%-5.36%, respectively, and the recoveries in the actual samples were in the range 82.4%-103.7%. Moreover, the respective residual levels of BPA and BPB in peach juice samples were 2.09 and 1.37 μg/L. Regeneration studies revealed that the CoNi@NGC adsorbent could be reused at least five times, which significantly reduced the cost of evaluation. In summary, compared to other methods, this method displays the advantages of a high sensitivity, rapid extraction, and environmental friendliness, thereby exhibiting considerable potential for use in conventional monitoring of trace-level BPs in food matrices.

Determination of chloramphenicol and tetracycline residues in milk samples by means of nanofiber coated magnetic particles prior to high-performance liquid chromatography-diode array detection

A magnetic solid phase extraction (MSPE) coupled with high-performance liquid chromatography-diode array detection (HPLC-DAD) methodology was developed for the determination of chloramphenicol (CP) and tetracycline (TET) antibiotic residues in milk samples. As a solid phase sorbent, C-nanofiber coated magnetic nanoparticles were synthesized and extensively characterized using Field Emission Scanning Electron Microscopy (FE-SEM), Raman Spectroscopy and X-ray Powder Diffraction (XRD) analysis. Experimental variables of MSPE method for both antibiotic analytes were investigated and optimized systematically. After MSPE, the linear range for both the analytes (r² > 0.9954) were obtained in a range 10.0-600.0 ng mL^-1. The limit of detections (LODs) for CP and TET were 3.02 and 3.52 ng mL^-1, respectively while RSDs % were below than 4.0%. Finally, the developed method based on MPSE-HPLC-DAD was applied to real milk samples to quantify the antibiotic residues. Recovery values for each antibiotic compound were found in the range of 94.6-105.4% (n = 3) by using spiked model solution.

The development of isomer-specific analysis of branched 4-nonylphenol in food for dietary exposure - a critical review of analytical methods and occurrence in foodstuffs

4-Nonylphenol (4-NP) is a para-substituted phenolic compound comprising a straight or branched carbon chain group while branched 4-NP consists of 211 possible structural isomers. NP is recognised as an environmental pollutant and exists ubiquitously in both the environment and in food. 4-NP, especially branched 4-NP, has been shown to have the potential role of endocrine disruptor and xeno-oestrogen. Moreover, different NP isomers also exhibit different oestrogen-like activities. Recently, it was reported that the isomer-specific profile of 4-NP in foodstuffs varies greatly between and within food groups. Hence, risk assessment based on total branched 4-NP cannot reflect dietary risk. This study reviews the analytical methods applicable to conduct an isomer-specific analysis of 4-NP and its occurrence in foodstuffs. Lastly, research gaps are identified for future research.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

Recent advances in metal-organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF- or COF-based solid-phase extraction (SPE), solid-phase microextraction (SPME), gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.