Determination of Ultraviolet Absorbers and Light Stabilizers in Food Packaging Bags by Magnetic Solid Phase Extraction Followed by High-Performance Liquid Chromatography

Hollow multi-shelled MOF derivative adsorbent for efficient magnetic solid-phase extraction of several typical endocrine disrupting compounds from water

Bisphenols and benzophenones are two typical kinds of endocrine-disrupting compounds (EDCs) that have been extensively detected in water environments, posing unanticipated risks to aquatic organisms and humans. It is urgent to develop efficient sample pretreatment methods for precise measurement of such EDCs. In this study, a magnetic and multi-shelled metal-organic framework derivative material has been prepared to extract and enrich trace bisphenols and benzophenones from water. Via a solvothermal reaction induced by sodium citrate followed by a carbonization treatment, a ZIF-67@ZIF-8 derived CoZn-magnetic hierarchical carbon (CoZn-MHC) material has been synthesized as a high-performance magnetic solid-phase extraction (MSPE) adsorbent. This adsorbent exhibited a good specific surface area (213.80 m2⋅g-1) and a saturation magnetization of 63.2 emu·g-1. After the optimization of several parameters (including adsorbent dosage, extraction time, pH, ionic strength, desorption solvent, and solvent volume), an efficient MSPE method for several EDCs (comprising bisphenols and benzophenones) was developed with a good linear range (R2 ≥ 0.990), a high sensitivity range (LODs: 0.793-5.37 ng⋅L-1), and good reusability (RSD ≤4.67 % in five consecutive tests). Furthermore, the material exhibited commendable resistance to matrix interference in natural water samples with the recovery rates of target compounds ranging from 74.8 % to 107 %. We envision that the preparation strategy of this functional metal-organic framework (MOF)-based adsorbent for EDCs may provide insights for relevant research in the future.

Reduced Graphene Oxide Aerogels Cartridges for Solid Phase Extraction of Benzotriazoles

UV-benzotriazoles have been identified as water micropollutants that cause serious problems for human health and the environment. Their low concentration in water bodies complicates their detection by direct water analysis, slowing the corrective actions to avoid bioaccumulation. In this regard, the use of graphene-based materials with a high affinity for non-polar molecules has been demonstrated to be a potential tool for the optimal separation and concentration of this type of molecules in solid phase extraction (SPE) processes. This work evaluates the potential of novel reduced graphene oxide aerogels (rGO) as extractants of mixtures of three UV-benzotriazoles in water at low concentrations. These rGO aerogels incorporate graphenic domains into a tough structure of polymeric chains by adding graphene oxide during the synthesis of resorcinol-formaldehyde gels. Aerogels with a different content and ordering of graphenic domains were obtained and characterized using Raman, XRD, SEM and nitrogen adsorption isotherms (-196 °C). The rGO aerogels that performed better as solid phase extractants were those containing 60% rGO. Aerogels with lower rGO contents (40%) required a high-temperature (2000 °C) treatment to render competitive results. The SPE methodology using selected rGO aerogels was optimized by varying the elution solvent, elution time and volume. The best performances, i.e., recoveries of 80-100% and enrichment factors of 12.5-50, were accomplished when using 0.8 mL of tetrahydrofuran (THF) as an elution solvent. As a result, a fast (10 min) and simple extraction method of UV-benzotriazoles in water was attained, achieving a detection limit of 1 ng mL^-1. Selected aerogels were finally tested for the SPE of spiked samples of river waters, showing a similar performance to that observed with synthetic mixtures.

Emissions and toxic units of solvent, monomer and additive residues released to gaseous phase from latex balloons

This study describes the VOCs emissions from commercially available latex balloons. Nine compounds are determined to be emitted from 13 types of balloons of different colors and imprints in 30 and 60 °C. The average values of total volatile organic compounds (TVOCs) emitted from studied samples ranged from 0.054 up to 7.18 μg g^-1 and from 0.27 up to 36.11 μg g^-1 for 30 °C and 60 °C, respectively. The dataset is treated with principal component analysis (PCA) and multiple curve resolution (MCR) to characterize its internal patterns. Here two groups on compounds are recognized - the first one related to balloon material, the second one being emissions of compounds previously adsorbed on balloon material. The toxicity assessment of MCR modeled balloons' emissions was performed by toxic unit (TU) approach. The obtained TUs were summed to give toxicity emission assessment. The incorporation of TUs allows to identify the balloons with the most toxic emissions- imprinted ones in 60 °C. The compounds of the highest TUs are hexanal and benzene. FTIR analysis shows that all balloons are made of the same polymeric material - isoprene, so all differences in emissions are related to different additives like pigments, imprints or these responsible for opaqueness. Analyzing the obtained research results it was noticed that latex balloons might be considered as an important source of emission of aliphatic and monoaromatic hydrocarbons to the gaseous phase.

Emissions of selected monoaromatic hydrocarbons as a factor affecting the removal of single-use polymer barbecue and kitchen utensils from everyday use

The main focus of this study is the emission of monoaromatic hydrocarbons because these are the preliminary factors of potential solvent and monomer residues present in single-use plastic barbecue and kitchen utensils comprising polystyrene, polypropylene, natural cellulose, and biodegradable polymers intended for use with hot meal or beverages. Herein, the emissions of monoaromatic hydrocarbons (styrene, benzene, toluene, ethylbenzene, and xylene compounds and the total volatile organic compounds (TVOC)) from nine types of disposable plastic utensils are reported. Seventy two samples of single-use plastic utensils were conditioned at 40 and 80 °C using a stationary emission microchamber system. The average TVOC released from the studied polystyrene, polypropylene, and natural or biodegradable utensils were (2.3 ± 1.3), (1.01 ± 0.15), and (0.48 ± 0.37) μg g^-1, respectively, at 40 °C and (11.1 ± 1.2), (46.1 ± 9.5), and (5.5 ± 1.1) μg g^-1, respectively, at 80 °C. Significant emissions of styrene (ranged from 3.5 up to 15.3 × 10³ ng∙g^-1), toluene (from 2.8 up to 0.53 × 10³ ng∙g^-1), and ethylbenzene (from 3.7 up to 5.7 × 10³ ng∙g^-1) from the studied samples were observed, especially at 80 °C. Thus, elevated temperatures increase the potential emission of solvent and monomer residues from plastics and could affect the quality of consumed meals or beverages, such as taste. Additionally, to determine the possible interactions between the measured chemical compounds in the plastic utensils, the Pearson's correlation coefficients were calculated.