In vivo volumetric monitoring of revascularization of traumatized skin using extended depth-of-field photoacoustic microscopy

Efficacy of Iminoctadine Trialbesilate and Trifloxystrobin in Inhibiting and Controlling Pear Powdery Mildew (Phyllactinia pyri) in Hebei Province, China

Pear powdery mildew (PPM), caused by Phyllactinia pyri, is one of the most serious diseases affecting production in the Hebei pear-growing region of China. Iminoctadine trialbesilate and trifloxystrobin are known to have broad-spectrum activity against a wide range of plant pathogens, including P. pyri. A total of 105 P. pyri strains were isolated from 11 cities in Hebei Province from 2017 to 2019. Iminoctadine trialbesilate and trifloxystrobin significantly inhibited P. pyri growth. Microscopic observation showed that P. pyri mycelia had different degrees of desiccation and that the conidial cell contents had been released. The sensitivities of 60 P. pyri strains to iminoctadine trialbesilate and trifloxystrobin were determined in vitro, and the average EC50 values were 0.5773 ± 0.0014 and 1.2038 ± 0.0010 μg/ml, respectively. The average EC50 values for 85 and 75% of the strains with continuous single peak frequency distributions were 0.4534 ± 0.0012 and 0.8124 ± 0.0039 μg/ml, respectively. These data could be used as the baseline sensitivities of P. pyri to these two fungicides. The maximum difference multiples of the sensitivities of P. pyri strains from the different cities to iminoctadine trialbesilate and trifloxystrobin were 13.5- and 17.2-fold, respectively. Cluster analysis showed that there was no significant correlation between P. pyri sensitivity and geographical origin. The field efficacies in controlling PPM were higher than 85%. These findings can improve how we monitor iminoctadine trialbesilate and trifloxystrobin resistance and improve application efficiency.

Quantitative 3D Temperature Rendering of Deep Tumors by a NIR-II Reversibly Responsive W-VO2@PEG Photoacoustic Nanothermometer to Promote Precise Cancer Photothermal Therapy

Accurately monitoring the three-dimensional (3D) temperature distribution of the tumor area in situ is a critical task that remains challenging in precision cancer photothermal (PT) therapy. Here, by ingeniously constructing a polyethylene glycol-coated tungsten-doped vanadium dioxide (W-VO2@PEG) photoacoustic (PA) nanothermometer (NThem) that linearly and reversibly responds to the thermal field near the human-body-temperature range, the authors propose a method to realize quantitative 3D temperature rendering of deep tumors to promote precise cancer PT therapy. The prepared NThems exhibit a mild phase transition from the monoclinic phase to the rutile phase when their temperature grows from 35 to 45 °C, with the optical absorption sharply increased ∼2-fold at 1064 nm in an approximately linear manner in the near-infrared-II (NIR-II) region, enabling W-VO2@PEG to be used as NThems for quantitative temperature monitoring of deep tumors with basepoint calibration, as well as diagnostic agents for PT therapy. Experimental results showed that the temperature measurement accuracy of the proposed method can reach 0.3 °C, with imaging depths up to 2 and 0.65 cm in tissue-mimicking phantoms and mouse tumor tissue, respectively. In addition, it was verified through PT therapy experiments in mice that the proposed method can achieve extremely high PT therapy efficiency by monitoring the temperature of the target area during PT therapy. This work provides a potential demonstration promoting precise cancer PT therapy through quantitative 3D temperature rendering of deep tumors by PA NThems with higher security and higher efficacy.

Spatially-variant image deconvolution for photoacoustic tomography

Photoacoustic tomography (PAT) system can reconstruct images of biological tissues with high resolution and contrast. However, in practice, the PAT images are usually degraded by spatially variant blur and streak artifacts due to the non-ideal imaging conditions and chosen reconstruction algorithms. Therefore, in this paper, we propose a two-phase restoration method to progressively improve the image quality. In the first phase, we design a precise device and measuring method to obtain spatially variant point spread function samples at preset positions of the PAT system in image domain, then we adopt principal component analysis and radial basis function interpolation to model the entire spatially variant point spread function. Afterwards, we propose a sparse logarithmic gradient regularized Richardson-Lucy (SLG-RL) algorithm to deblur the reconstructed PAT images. In the second phase, we present a novel method called deringing which is also based on SLG-RL to remove the streak artifacts. Finally, we evaluate our method with simulation, phantom and in vivo experiments, respectively. All the results show that our method can significantly improve the quality of PAT images.

Photoacoustic maximum amplitude projection microscopy by ultra-low data sampling

Photoacoustic microscopy (PAM) has attracted increasing research interest in the biomedical field due to its unique merit of combining light and sound. In general, the bandwidth of a photoacoustic signal reaches up to tens or even hundreds of MHz, which requires a high-performance acquisition card to meet the high requirement of precision of sampling and control. For most depth-insensitive scenes, it is complex and costly to capture the photoacoustic maximum amplitude projection (MAP) images. Herein, we propose a simple and low-cost MAP-PAM system based on a custom-made peak holding circuit to obtain the extremum values by Hz data sampling. The dynamic range of the input signal is 0.01-2.5 V, and the -6-dB bandwidth of the input signal can be up to 45 MHz. Through in vitro and in vivo experiments, we have verified that the system has the same imaging ability as conventional PAM. Owing to its compact size and ultra-low price (approximately $18), it provides a new performance paradigm for PAM and opens up a new way for an optimal photoacoustic sensing and imaging device.

A high-efficient excitation-detection thermoacoustic imaging probe for breast tumor detection

BACKGROUND

Microwave-induced thermoacoustic (TA) imaging (MTAI) is a promising alternative to biomedical imaging due to its high resolution, deep imaging depth, and minimal biohazard. To provide images of different anatomical regions and apply them to different clinical scenarios, the development of miniaturized portable TA probes is imperative.

PURPOSE

This study is aimed to propose a highly efficient handheld non-reflective microwave-acoustic coaxial TA probe to advance the translation of MTAI for the clinical use.

METHODS

The TA probe integrates a hollowed microwave antenna with a forward radiating uniform microwave field and a linear ultrasonic transducer array which is placed in the hole in the middle of the antenna that has almost no effect on the microwave distribution. The integrated probe was evaluated for properties, including the excitation efficiency of the microwave and the reception efficiency of the acoustic signal. Finally, an isolated EMT6 cell tumor was embedded in a sheep mammary gland to simulate the natural breast tumor environment, and the tumor was detected with the proposed MTAI probe to evaluate its practical feasibility.

RESULTS

Compared with the previous TA imaging probe, it has improved the detection efficiency of TA signals by up to 41%, contributing to an improved signal-to-noise ratio (SNR) of the image. The proposed TA probe successfully detected tumors embedded in the breast with a contrast ratio 3.27 times higher than the surrounding tissue in phantom experiments.

CONCLUSION

The proposed TA probe with the features of microwave illumination and ultrasonic detection of coaxial, avoiding TA signal attenuation due to reflection, enables high-efficient TA signal excitation and detection. The proposed TA probe is essential for improving the excitation and detection efficiency of TA signals, and increasing the flexibility of the probe, providing a bright future for the clinical application of MTAI technology.

Portable Microwave-Acoustic Coaxial Thermoacoustic Probe With Miniaturized Vivaldi Antennas for Breast Tumor Screening

Microwave-induced thermoacoustic (TA) imaging (MTAI), which exploits dielectric contrasts to provide images with high contrast and spatial resolution, holds the potential to serve as an additional means of clinical diagnosis and treatment. However, conventional MTAI usually uses large and heavy metal antennas to radiate pulsed microwaves, making it challenging to image different target areas flexibly. In this work, we presented the design and evaluation of a portable microwave-acoustic coaxial TA probe (51 mm × 63 mm × 138 mm) that can flexibly image the region of interest. The TA probe contains two miniaturized symmetrically distributed Vivaldi antennas (7.5 g) and a 128-element linear ultrasonic transducer. By adjusting the geometry of the antennas and the ultrasonic transducer, the TA probe's acoustic field and microwave field can be designed to be coaxial, which helps achieve homogeneous microwave illumination and high-sensitivity ultrasonic detection. The practical feasibility of the proposed probe was tested on an in vitro ewe breast and a healthy volunteer. The results demonstrate that the MTAI system with the proposed TA probe can visualize the anatomical structure of the breast tumor in ewe breast and a healthy volunteer breast with resolutions in hundreds of microns (transverse: 910 μm, axial: 780 μm) and an excellent signal-to-noise ratio can be obtained in deep adipose tissue (10 dB in 6 cm fat). The miniaturized portable TA probe takes a solid step forward in translating MTAI technology to clinical breast tumor diagnosis.

Ultrasound-guided adaptive photoacoustic tomography

Image formation in photoacoustic tomography (PAT) is generally based on the assumption that biological tissues are acoustically homogeneous. However, this does not hold, especially when strongly heterogeneous tissues, such as bones and air cavities, are present. Tissue heterogeneity can cause acoustic reflection, refraction, and scattering at interfaces, which may create distortions and artifacts in final images. To mitigate this problem, we propose an adaptive photoacoustic (PA) image reconstruction method based on prior structural information of an acoustically heterogeneous region extracted from ultrasound images. The method works in three steps: acoustic heterogeneity identification via ultrasound imaging; acoustically heterogeneous region segmentation; and adaptive time-domain raw data truncation and image reconstruction. The data truncation is based on a variable cutoff time, which can be adaptively determined according to the relative position of a transducer and an acoustically heterogeneous region. Numerical and in vivo experimental imaging results of human fingers demonstrate that the proposed ultrasound-guided adaptive image reconstruction method can effectively suppress acoustic heterogeneity-induced artifacts and substantially improve image quality. This work provides a practical way to mitigate the influence of acoustic heterogeneity in PAT.

Three dimensional confocal photoacoustic dermoscopy with an autofocusing sono-opto probe

Photoacoustic dermoscopy (PAD) is uniquely positioned for the diagnosis and assessment of dermatological conditions because of its ability to visualize optical absorption contrast in vivo in three dimensions. In this Letter, we developed a 3D confocal PAD (3D-CPAD) equipped with an autofocusing sono-opto probe to facilitate the reconstruction of high-spatial-resolution imaging of skin with multilaminate structures in depth direction. The autofocusing sono-opto probe integrated a 10-mm electrowetting-based varifocal lens to automatically control the acoustic and optical confocal length, and an annular ultrasonic detector with a mid-frequency of ~32.8 MHz is coaxially configured for receiving photoacoustic signals. Using this sono-opto probe, the acoustic and optical confocal length-shifting range from ~7 to 43 mm with high image contrast and spatial resolution in the 3D image reconstruction. Autofocusing property tests and 3D human skin in vivo imaging were carried out to demonstrate the imaging capability of the 3D-CPAD for potential clinical foreground in noninvasive biopsies of skin disease.

Photoacoustic microscopy of vascular adaptation and tissue oxygen metabolism during cutaneous wound healing

Cutaneous wounds affect millions of people every year. Vascularization and blood oxygen delivery are critical bottlenecks in wound healing, and understanding the spatiotemporal dynamics of these processes may lead to more effective therapeutic strategies to accelerate wound healing. In this work, we applied multi-parametric photoacoustic microscopy (PAM) to study vascular adaptation and the associated changes in blood oxygen delivery and tissue oxygen metabolism throughout the hemostasis, inflammatory, proliferation, and early remodeling phases of wound healing in mice with skin puncture wounds. Multifaceted changes in the vascular structure, function, and tissue oxygen metabolism were observed during the 14-day monitoring of wound healing. On the entire wound area, significant elevations of the arterial blood flow and tissue oxygen metabolism were observed right after wounding and remained well above the baseline over the 14-day period. On the healing front, biphasic changes in the vascular density and blood flow were observed, both of which peaked on day 1, remained elevated in the first week, and returned to the baselines by day 14. Along with the wound closure and thickening, tissue oxygen metabolism in the healing front remained elevated even after structural and functional changes in the vasculature were stabilized. On the newly formed tissue, significantly higher blood oxygenation, flow, and tissue metabolism were observed compared to those before wounding. Blood oxygenation and flow in the new tissue appeared to be independent of when it was formed, but instead showed noticeable dependence on the phase of wound healing. This PAM study provides new insights into the structural, functional, and metabolic changes associated with vascular adaptation during wound healing and suggests that the timing and target of vascular treatments for wound healing may affect the outcomes.

Multiscale confocal photoacoustic dermoscopy to evaluate skin health

BACKGROUND

Photoacoustic dermoscopy (PAD) is a promising branch of photoacoustic microscopy (PAM) that can provide a range of functional and morphologic information for clinical assessment and diagnosis of dermatological conditions. However, most PAM setups are unsuitable for clinical dermatology because their single-scale mode and narrow frequency band result in insufficient imaging depth or poor spatiotemporal resolution when visualizing the internal texture of the skin.

METHODS

We developed a multiscale confocal photoacoustic dermoscopy (MC-PAD) with a multifunction opto-sono objective that could achieve high quality dermatological imaging. Using the objective to coordinate the spatial resolution and penetration depth, the MC-PAD was used to visualize pathophysiological biomarkers and vascular morphology from the epidermis (EP) to the dermis, which enabled us to quantify skin abnormalities without using exogenous contrast agents for human skin.

RESULTS

The MC-PAD was shown to have the ability to differentiate between different types of cells (such as red blood cells and melanoma cells), image and quantify pigment of the skin, and visualize skin morphology and blood capillary landmarks. The MC-PAD detected a significant difference in the structures of some pigmented and vascular lesions of skin diseases compared with that of healthy skin (P<0.01). The café au lait macule (CALM) skin type was found to have a relatively higher melanin concentration and thicker stratum basale (SB) in the EP than healthy skin. The dermal vascular network of skin that had a port wine stain (PWS) had greater diameters and a denser distribution than healthy skin, as reported in clinical trials.

CONCLUSIONS

The MC-PAD has a broad range of applications for the diagnosis of human skin diseases and evaluation of the curative effect of treatments, and it can offer new perspectives in biomedical sciences.

Study on promoting regeneration of zebrafish skull by phycocyanin characterized by in vivo optical coherence tomography

In this study, the efficacy of phycocyanin in bone defect repairing was tested on a zebrafish skull defect model, and the evaluating process was monitored in vivo using optical coherence tomography (OCT). Thirty zebrafish were randomly divided into three groups, which were immersed in water and phycocyanin solution (50 and 100 mg/L) after skull defect creating. All zebrafish were examined by OCT immediately after craniotomy, and on the 10th and 20th days of phycocyanin treatment. All the model fish were euthanized to enable a histological evaluation of skull after 20 days of recovery. OCT images demonstrated that phycocyanin (50 mg/L) could repair a cranial defect within 20 days. A high concentration (100 mg/L) of phycocyanin may favor the recovery of bone abnormalities in 10 days, but with the extended treatment time to 20 days, a deformation of the skull occurs.

Undifferentiated destruction of mitochondria by photoacoustic shockwave to overcome chemoresistance and radiation resistance in cancer therapy

Resistance to either radiation or chemotherapy remains a complex and stubborn obstacle in cancer therapy and is responsible for a significant portion of the treatment failure. While the underlying mechanisms of the resistance are often associated with multiple factors, direct destruction of mitochondria is likely to ensure the ultimate death of the cell. Herein, a strategy of precise mitochondrial destruction using a photoacoustic (PA) shockwave was proposed to overcome chemoresistance and radiation resistance in cancer therapy. A nanoparticle featuring mitochondria-targeting and high near-infrared absorbance is constructed. The nanoparticle was found to indiscriminately localize in the mitochondria of both parental and its corresponding resistant tumor cells due to the mitochondrial transmembrane potential. By absorbing a controllable amount of energy from a pulsed laser, the nanoparticle could generate a mechanical PA shockwave that physically damages the mitochondria leading to the opening of apoptotic pathways and thus yielding a precision antitumor effect. The cell-killing efficiency was validated in vitro and in vivo. The results demonstrate that a PA shockwave can result in undifferentiated killing of the resistant tumor cells via destruction of mitochondria. Given the critical importance of resistant tumor cells, although at its preliminary stage, the proposed modality may open a new window in cancer therapy.

Tissue-mimicking phantoms for performance evaluation of photoacoustic microscopy systems

Phantom-based performance test methods are critically needed to support development and clinical translation of emerging photoacoustic microscopy (PAM) devices. While phantoms have been recently developed for macroscopic photoacoustic imaging systems, there is an unmet need for well-characterized tissue-mimicking materials (TMMs) and phantoms suitable for evaluating PAM systems. Our objective was to develop and characterize a suitable dermis-mimicking TMM based on polyacrylamide hydrogels and demonstrate its utility for constructing image quality phantoms. TMM formulations were optically characterized over 400-1100 nm using integrating sphere spectrophotometry and acoustically characterized using a pulse through-transmission method over 8-24 MHz with highly confident extrapolation throughout the usable band of the PAM system. This TMM was used to construct a spatial resolution phantom containing gold nanoparticle point targets and a penetration depth phantom containing slanted tungsten filaments and blood-filled tubes. These phantoms were used to characterize performance of a custom-built PAM system. The TMM was found to be broadly tunable and specific formulations were identified to mimic human dermis at an optical wavelength of 570 nm and acoustic frequencies of 10-50 MHz. Imaging results showed that tungsten filaments yielded 1.1-4.2 times greater apparent maximum imaging depth than blood-filled tubes, which may overestimate real-world performance for vascular imaging applications. Nanoparticles were detectable only to depths of 120-200 µm, which may be due to the relatively weaker absorption of single nanoparticles vs. larger targets containing high concentration of hemoglobin. The developed TMMs and phantoms are useful tools to support PAM device characterization and optimization, streamline regulatory decision-making, and accelerate clinical translation.

Photoacoustic monitoring of angiogenesis predicts response to therapy in healing wounds

Chronic wounds are a major health problem that cause the medical infrastructure billions of dollars every year. Chronic wounds are often difficult to heal and cause significant discomfort. Although wound specialists have numerous therapeutic modalities at their disposal, tools that could three dimensional-map wound bed physiology and guide therapy do not exist. Visual cues are the current standard but are limited to surface assessment; clinicians rely on experience to predict response to therapy. Photoacoustic (PA) ultrasound (US) is a non-invasive, hybrid imaging modality that can solve these major limitations. PA relies on the contrast generated by haemoglobin in blood which allows it to map local angiogenesis, tissue perfusion and oxygen saturation-all critical parameters for wound healing. This work evaluates the use of PA-US to monitor angiogenesis and stratify patients responding versus not-responding to therapy. We imaged 19 patients with 22 wounds once a week for at least 3 weeks. Our findings suggest that PA imaging directly visualises angiogenesis. Patients responding to therapy showed clear signs of angiogenesis and an increased rate of PA increase (p = 0.002). These responders had a significant and negative correlation between PA intensity and wound size. Hypertension was correlated to impaired angiogenesis in non-responsive patients. The rate of PA increase and hence the rate of angiogenesis was able to predict healing times within 30 days from the start of monitoring (power = 88%, alpha = 0.05). This early response detection system could help inform management and treatment strategies while improving outcomes and reducing costs.

Human-Body-Temperature Triggerable Phase Transition of W-VO2@PEG Nanoprobes with Strong and Switchable NIR-II Absorption for Deep and Contrast-Enhanced Photoacoustic Imaging

The immense potential of temperature-responsive nanomaterials for use as contrast agents has propelled much recent research and development in the field of photoacoustic (PA) imaging, while the exorbitant transition temperature exceeding the human-tolerable range and the low reversibility of the reported temperature-sensitive nanosystems are still two severe issues that hinder effective imaging and long-term monitoring in practical applications. Herein, we propose a high-performing thermoresponsive polyethylene glycol-coated tungsten-doped vanadium dioxide (W-VO₂@PEG) nanoprobe (NP) with strong and switchable optical absorption in the near-infrared-II (NIR-II) biowindow (1000-1700 nm) near human-body temperature, to achieve deep and contrast-enhanced PA imaging. Our study shows that the PA signal amplitude of W-VO₂@PEG NPs at 1064 nm increases up to 260% when the temperature increases from 35 °C to 45 °C, with a signal fluctuation of less than 10% after 10 temperature cycles, therefore enabling great potential of "off-to-on" dynamic contrast-enhanced imaging capability in deep-seated tissues. Experiments on tissue-mimicking phantoms and in vitro chicken breast showed that, by levering the prepared W-VO₂@PEG NPs and dynamically modulating the temperature field with an external NIR optical stimulus, contrast-enhanced PA images of the target can be obtained with an imaging depth up to 1.5 cm. Furthermore, in vivo potential of the prepared thermoresponsive NPs for the detection and identification of deep-seated tumors by directly comparing to conventional "always on" NPs has been demonstrated. Our work will offer feasible guidance for the development of smart temperature-activatable PA NPs with improved imaging depth and imaging contrast.

Carbon-Coated Magnetic Nanoparticle Dedicated to MRI/Photoacoustic Imaging of Tumor in Living Mice

Multimodality imaging can reveal complementary anatomic and functional information as they exploit different contrast mechanisms, which has broad clinical applications and promises to improve the accuracy of tumor diagnosis. Accordingly, to attain the particular goal, it is critical to exploit multimodal contrast agents. In the present work, we develop novel cobalt core/carbon shell-based nanoparticles (Cobalt at carbon NPs) with both magnetization and light absorption properties for dual-modality magnetic resonance imaging (MRI) and photoacoustic imaging (PAI). The nanoparticle consists of ferromagnetic cobalt particles coated with carbon for biocompatibility and optical absorption. In addition, the prepared Cobalt at carbon NPs are characterized by transmission electron microscope (TEM), visible-near-infrared spectra, Raman spectrum, and X-ray powder diffraction for structural analysis. Experiments verify that Cobalt at carbon NPs have been successfully constructed and the designed Cobalt at carbon NPs can be detected by both MRI and PAI in vitro and in vivo. Importantly, intravenous injection of Cobalt at carbon NPs into glioblastoma-bearing mice led to accumulation and retention of Cobalt at carbon NPs in the tumors. Using such a multifunctional probe, MRI can screen rapidly to identify potential lesion locations, whereas PAI can provide high-resolution morphological structure and quantitative information of the tumor. The Cobalt at carbon NPs are likely to become a promising candidate for dual-modality MRI/PAI of the tumor.

An Excitation-Reception Collinear Probe for Ultrasonic, Photoacoustic, and Thermoacoustic Tri-Modal Volumetric Imaging

Imaging systems that integrate multiple modalities can reveal complementary anatomic and functional information as they exploit different contrast mechanisms, which have shown great application potential and advantages in preclinical studies. A portable and easy-to-use imaging probe will be more conducive to transfer to clinical practice. Here, we present a tri-modal ultrasonic (US), photoacoustic (PA), and thermoacoustic (TA) imaging system with an excitation-reception collinear probe. The acoustic field, light field, and electric field of the probe were designed to be coaxial, realizing homogeneous illumination and high-sensitivity detection at the same detection position. US images can provide detailed information about structures, PA images can delineate the morphology of blood vessels in tissues, and TA images can reveal dielectric properties of the tissues. Moreover, phantoms and in vivo human finger experiments were performed by the tri-modal imaging system to demonstrate its performance. The results show that the tri-modal imaging system with the proposed probe has the ability to detect small breast tumors with a radius of only 2.5 mm and visualize the anatomical structure of the finger in three dimensions. Our work confirms that the tri-modal imaging system equipped with a collinear probe can be applied to a variety of different scenarios, which lays a solid foundation for the application of the tri-modality system in clinical trials.

Bifocal 532/1064 nm alternately illuminated photoacoustic microscopy for capturing deep vascular morphology in human skin

BACKGROUND

As a promising technology, photoacoustic microscopy (PAM) plays a critical role in diagnosis and assessment of dermatological conditions by providing subtle vascular networks non-invasively. However, the established PAMs are insufficient for clinical dermatology when faced with complex structures of human skin instead of animal models owing to high melanin content and superimposed vasculature for Asians, which cannot balance the spatial resolution and the imaging depth.

OBJECTIVES

To evaluate the ability of bifocal 532/1064-nm alternately illuminated photoacoustic microscopy (BF-PAM) to non-invasively reveal the morphological structure of human skin for improving the diagnosis and therapeutic efficacy of skin diseases.

METHODS

A BF-PAM was developed to capture biopsy-like information of human skin from epidermis to hypodermis. The optical foci of the two excitation beams are staggered in the axial direction to form an extended depth-of-field, which can maintain the lateral resolution and the contrast of PA image.

RESULTS

The imaging capability of the BF-PAM was demonstrated by depicting the vascular morphology of multilayered skin with imaging depth of ˜3 mm. Furtherly, vascular malformations in port-wine stains skin were quantitatively assessed without the need for any contrast agent, and the distribution, depth and diameter of the ectatic vessels can determine an optimal treatment protocol for port-wine stains lesions.

CONCLUSIONS

The quantitative vascular morphology in the dermis can be used to accurately assess vascular characteristics, in which case it enables clinicians to determine optimum treatment parameters in individual patients. As a non-invasive imaging technique, BF-PAM holds great potential to provide objective assessment to enhance the therapeutic efficacy.

ETHICAL STATEMENT

The study was conducted in accordance with the Declaration of Helsinki (as revised in 2013). The study was approved by the Chinese Ethics Committee of Registering Clinical Trials (ChiECRCT20200184) and registered with Chinese Clinical Trial Registry (ChiCTR2000034400). Before skin imaging, written informed consent was taken from all individual participants.

Classification and discrimination of real and fake blood based on photoacoustic spectroscopy combined with particle swarm optimized wavelet neural networks

In this work, photoacoustic spectroscopy was employed to distinguish real blood from fake blood rapidly, accurately, and recoverably. To achieve this goal, a photoacoustic detection system for blood was established in the forward mode. In the experiments, four kinds of animal blood and two kinds of fake blood in a total of 150 groups were used. The time-resolved photoacoustic signal and peak-to-peak values (PPVs) of all blood were captured in 700-1064 nm with intervals of 5 nm. Experimental results show that the amplitudes, profiles, peak-point time, and PPVs are different between real and fake blood. Although the PPVs of real blood are larger than those of the fake ones at 700-850 nm, the differences in PPVs are not obvious at 850-1064 nm, especially when there are spectral overlaps of PPVs. To accurately classify and discriminate real and fake blood, a wavelet neural network (WNN) was used to train 120 groups of blood and test 30 groups of blood. Moreover, the particle swarm optimization (PSO) algorithm was used to optimize the weights and thresholds, as well as the translation and scale factors of the Morlet-liked wavelet basis function of the WNN. Under optimal parameters, the correct rate of the WNN-PSO algorithm was improved from 63.3% to 96.7%. Next, principal component analysis (PCA) was combined into the WNN-PSO algorithm to further improve the correct rate. The results indicate that the correct rate of the PCA-WNN-PSO algorithm with 10 principal components reaches 100 %. Therefore, photoacoustic spectroscopy combined with the PCA-WNN-PSO algorithm exhibits excellent performance in the classification and discrimination of real and fake blood.

High-security photoacoustic identity recognition by capturing hierarchical vascular structure of finger

Currently, most biometric methods mainly use single features, making them easily forged and cracked. In this study, a novel triple-layers biometric recognition method, based on photoacoustic microscopy, is proposed to improve the security of biometric identity recognition. Using the photoacoustic (PA) dermoscope, three-dimensional absorption-structure information of the fingers was obtained. Then, by combining U-Net, Gabor filtering, wavelet analysis and morphological transform, a lightweight algorithm called photoacoustic depth feature recognition algorithm (PADFR) was developed to automatically realize stratification (the fingerprint, blood vessel fingerprint and venous vascular), extracting feature points and identity recognition. The experimental results show that PADFR can automatically recognize the PA hierarchical features with an average accuracy equal to 92.99%. The proposed method is expected to be widely used in biometric identification system due to its high security.

Optoacoustic imaging of the skin

Optoacoustic (OA, photoacoustic) imaging capitalizes on the synergistic combination of light excitation and ultrasound detection to empower biological and clinical investigations with rich optical contrast while effectively bridging the gap between micro and macroscopic imaging realms. State-of-the-art OA embodiments consistently provide images at micron-scale resolution through superficial tissue layers by means of focused illumination that can be smoothly exchanged for acoustic-resolution images at diffuse light depths of several millimetres to centimetres via ultrasound beamforming or tomographic reconstruction. Taken together, this unique multi-scale imaging capacity opens unprecedented capabilities for high-resolution in vivo interrogations of the skin at scalable depths. Moreover, diverse anatomical and functional information is retrieved via dynamic mapping of endogenous chromophores such as haemoglobin, melanin, lipids, collagen, water and others. This, along with the use of non-ionizing radiation, facilitates a clinical translation of the OA modalities. We review recent progress in OA imaging of the skin in preclinical and clinical studies exploiting the rich contrast provided by endogenous substances in tissues. The imaging capabilities of existing approaches are discussed in the context of initial translational studies on skin cancer, inflammatory skin diseases, wounds and other conditions.

An Ellipsoidal Focused Ultrasound Transducer for Extend-focus Photoacoustic Microscopy

OBJECTIVE

Limited by spherical focused ultrasound transducer (SUT) with a high acoustic numerical aperture, photoacoustic microscopy (PAM) suffers a rapidly degrading sensitivity and lateral resolution as increased depth. In this study, an ellipsoidal focused ultrasound transducer (EUT) was developed to address the above restriction via providing high sensitivity and lateral resolution over a large depth of field (DOF).

METHODS

To fabricate the EUT, the piezoelectric element was laminated onto a curved steel surface for self-focusing (the ellipsoidal continuous-focus geometry was employed instead of the spherical single-focus one). Additionally, phantoms and in vivo animal experiments were performed by an extend-focus PAM equipped with EUT to characterize its performance.

RESULTS

The EUT involved over 30 MHz center frequency and -6 dB bandwidth of 124% with a resolution-invariant focal depth of 1.39 mm, more than 3 times the DOF of the SUT.

CONCLUSION

The in vivo imaging results demonstrated that the EUT was capable of extending the focal depth to get rid of the restriction of the visual field, while the DOF of the SUT was limited by the nature of spherical geometry.

SIGNIFICANCE

The EUT markedly enhances the image quality at different imaging depths, which has great potential for promoting the biomedical development of in vivo rapid-noninvasive PAM.