Effect of molecular weight of chitosan on antimicrobial properties and tissue compatibility of chitosan-impregnated bacterial cellulose films

Therapeutic effect of ZnO NPs-polyhexanide-hydrogel on Staphylococcus aureus-induced skin wound infection in mice

Nanometer zinc oxide (ZnONPs) offers strong antibacterial, wound healing, hemostatic benefits, and UV protection. Additionally, poly(hexamethylene biguanide)hydrochloride (PHMB) is an environmentally friendly polymer with strong bactericidal properties. However, the synergistic effect of the combination of ZnONPs and PHMB has not been previously explored. The purpose of this study is to explore the synergies of ZnONPs and PHMB and the healing efficacy of ZnO NPs-PHMB-hydrogel on skin wounds in mice infected with Staphylococcus aureus. Therefore, the mice were subjected to skin trauma to create a wound model and were subsequently infected with S. aureus, and then divided into various experimental groups. The repair effect was evaluated by assessing the healing rate, as well as measuring the levels of TNF-α, IL-2, EGF, and TGF-β1 contents in the tissue. On the 4th and 9th days post-modeling, the Z-P group exhibited notably higher healing rates compared to the control group. However, on the 15th day, both the Z-P and AC groups achieved healing rates exceeding 99%. ZnO NPs-PHMB-hydrogel promoted the formation of a fully restored epithelium, increased new hair follicles and sebaceous glands beneath the epidermis, and markedly reduced inflammatory cell infiltration, which was markedly distinct from the control group. On the 7th day, the Z-P group exhibited significantly higher levels of EGF and TGF-β1, along with a considerable reduction in the TNF-α levels as compared with the control group. These results affirmed that ZnO NPs-PHMB-hydrogel effectively inhibits S. aureus infection and accelerates skin wound healing.

Effect of tea polyphenols on chitosan packaging for food preservation: Physicochemical properties, bioactivity, and nutrition

Chitosan packaging has been widely studied for food preservation, the application of which is expanded by the incorporation of tea polyphenols. This paper reviews the influence of tea polyphenols incorporation on chitosan-based packaging from the perspectives of physicochemical properties, bioactivity used for food preservation, and nutritional value. The physicochemical properties included optical properties, mechanical properties, water solubility, moisture content, and water vapor barrier property, concluding that the addition of tea polyphenols improved the opacity, water solubility, and water vapor barrier property of chitosan packaging, and the mechanical properties and water content were decreased. The bioactivity used for food preservation, that is antioxidant and antimicrobial properties, is enhanced by tea polyphenols, improving the preservation of food like meat, fruits, and vegetables. In the future, efforts will be needed to improve the mechanical properties of composite film and adjust the formula of tea polyphenols/chitosan composite film to apply to different foods. Besides, the identification and development of high nutritional value tea polyphenol/chitosan composite film is a valuable but challenging task. This review is expected to scientifically guide the application of tea polyphenols in chitosan packaging.

Physicochemical, antibacterial and food preservation properties of active packaging films based on chitosan/ε-polylysine-grafted bacterial cellulose

To address the environmental and food contamination issues caused by plastics and microorganisms, antimicrobial films using natural polymers has attracted enormous attention. In this work, we proposed a green, convenient and fast approach to prepare antimicrobial films from chitosan (CS), bacterial cellulose (BC) and ε-polylysine (ε-PL). The effects of different concentrations of ε-PL (0 %, 0.25 %, 0.5 %, 0.75 %, 1 %, w/v) on the physicochemical properties and antibacterial activity of composite films (CS-DABC-x%PL) were systematically investigated. Furthermore, a comprehensive comparison with purely physically mixed CS-BC-x%PL films provides a deeper understanding of the subject matter. Characterization tests of the films were conducted using scanning electron microscope (SEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The results suggested that the incorporation of 0.5 % ε-PL reduced the water solubility of the composite film by 19.82 %, along with improved the tensile strength and thermal stability by 37.31 % and 28.54 %. As ε-PL concentration increased to 1 %, the antibacterial performance of the films gradually enhanced. Additionally, the CS-DABC-0.5%PL film demonstrated effectiveness in delaying the deterioration of tilapia. These findings imply that this novel green packaging material holds significant potential in food preservation due to its promising antibacterial properties.

Effect of Reduction Methods on the Properties of Composite Films of Bacterial Cellulose-Silver Nanoparticles

Composite films of bacterial cellulose-silver nanoparticles (BC-Ag) were prepared by different methods of in situ reduction of silver ions, using sodium hydroxide, ascorbic acid, chitosan, and UV irradiation. The effects of the reduction methods on their properties were investigated. The chitosan-reduced composite exhibited dispersed silver nanoparticles (AgNPs) within the nanocellulose matrix with the smallest size, while the ascorbic-reduced composite displayed the largest size. The incorporation of AgNPs tended to reduce the crystallinity of the composites, except for the ascorbic-reduced composite, which exhibited an increase in crystallinity. Mechanical testing revealed that the ascorbic-reduced composite had the highest Young's modulus of 8960 MPa, whereas the UV-reduced composite had the highest tensile strength and elongation at break. Thermal analysis of BC-Ag composites indicated similar glass transition temperature and decomposition profiles to BC, with additional weight-loss steps at high temperatures. The sodium hydroxide-reduced composite demonstrated the highest electrical conductivity of 1.1 × 10^-7 S/cm. Water absorption capacity was reduced by the incorporation of AgNPs, except for the chitosan-reduced composite, which showed an enhanced water absorption capacity of 344%. All BC-Ag composites displayed very strong antibacterial activities against Staphylococcus aureus and Escherichia coli. These results also highlight the potential uses of BC-Ag composites for various applications.

Prevention of marine biofouling in the aquaculture industry by a coating based on polydimethylsiloxane-chitosan and sodium polyacrylate

In this study, a series of novel hydrophobic/hydrophilic hybrid (HHH) coatings with the feature of preventing the fouling phenomenon was fabricated based on polydimethylsiloxane (PDMS), as matrix and two hydrophilic polymers: chitosan and sodium polyacrylate, as dispersed phases. Antibacterial activity, pseudo-barnacle adhesion strength, surface free energy, water contact angle, and water absorption were performed for all samples. Evaluating field immersion of the samples was performed in the natural seawater. The results showed that the dispersed phase containing PDMS coatings showed simultaneously both of antibacterial activity and foul release behavior. Among the samples, the PCs4 coating containing 4 wt% Cs indicated the lowest pseudo barnacle adhesion strength (0.04 MPa), the lowest surface free energy (18.94 mN/m), the highest water contact angle (116.05°), and the percentage of fouling organisms 9.8 % after 30 days immersion. The HHH coatings can be considered as novel eco-friendly antifouling/foul release coatings for aquaculture applications.

Antimicrobial Natural Hydrogels in Biomedicine: Properties, Applications, and Challenges-A Concise Review

Natural hydrogels are widely used as biomedical materials in many areas, including drug delivery, tissue scaffolds, and particularly wound dressings, where they can act as an antimicrobial factor lowering the risk of microbial infections, which are serious health problems, especially with respect to wound healing. In this review article, a number of promising strategies in the development of hydrogels with biocidal properties, particularly those originating from natural polymers, are briefly summarized and concisely discussed. Common strategies to design and fabricate hydrogels with intrinsic or stimuli-triggered antibacterial activity are exemplified, and the mechanisms lying behind these properties are also discussed. Finally, practical antibacterial applications are also considered while discussing the current challenges and perspectives.

Cellulose-Chitosan Functional Biocomposites

Here, we present a detailed review of recent research and achievements in the field of combining two extremely important polysaccharides; namely, cellulose and chitosan. The most important properties of the two polysaccharides are outlined, giving rise to the interest in their combination. We present various structures and forms of composite materials that have been developed recently. Thus, aerogels, hydrogels, films, foams, membranes, fibres, and nanofibres are discussed, alongside the main techniques for their fabrication, such as coextrusion, co-casting, electrospinning, coating, and adsorption. It is shown that the combination of bacterial cellulose with chitosan has recently gained increasing attention. This is particularly attractive, because both are representative of a biopolymer that is biodegradable and friendly to humans and the environment. The rising standard of living and growing environmental awareness are the driving forces for the development of these materials. In this review, we have shown that the field of combining these two extraordinary polysaccharides is an inexhaustible source of ideas and opportunities for the development of advanced functional materials.

Nanochitin and Nanochitosan: Chitin Nanostructure Engineering with Multiscale Properties for Biomedical and Environmental Applications

Nanochitin and nanochitosan (with random-copolymer-based multiscale architectures of glucosamine and N-acetylglucosamine units) have recently attracted immense attention for the development of green, sustainable, and advanced functional materials. Nanochitin and nanochitosan are multiscale materials from small oligomers, rod-shaped nanocrystals, longer nanofibers, to hierarchical assemblies of nanofibers. Various physical properties of chitin and chitosan depend on their molecular- and nanostructures; translational research has utilized them for a wide range of applications (biomedical, industrial, environmental, and so on). Instead of reviewing the entire extensive literature on chitin and chitosan, here, recent developments in multiscale-dependent material properties and their applications are highlighted; immune, medical, reinforcing, adhesive, green electrochemical materials, biological scaffolds, and sustainable food packaging are discussed considering the size, shape, and assembly of chitin nanostructures. In summary, new perspectives for the development of sustainable advanced functional materials based on nanochitin and nanochitosan by understanding and engineering their multiscale properties are described.

Chitosan/carboxymethyl cellulose wound dressings supplemented with biologically synthesized silver nanoparticles from the ligninolytic fungus Anamorphous Bjerkandera sp. R1

Chitosan (CHI) and carboxymethyl cellulose (CMC) are naturally sourced materials with excellent physical, chemical, and biological properties, which make them a promising tool for the development of different medical devices. In this research, CHI-CMC wound dressings were manufactured, by using different colloidal suspensions of silver nanoparticles (AgNPs) synthesized from the ligninolytic fungus Anamorphous Bjerkandera sp. R1, called CS and SN. Transmission electron microscopy (TEM), UV-Vis spectroscopy, and dynamic light scattering (DLS) analysis were used to characterize AgNPs. The wound dressings were characterized, by scanning electron microscopy (SEM), optical microscopy and their mechanical, antimicrobial, and biological properties were evaluated. The results of the different characterizations revealed the formation of spherical AgNPs with a mean size between 10 and 70 nm for the different mixtures worked. The mechanical properties of CHI-CMS-AgNPs doped with CS and SN suspensions showed superior mechanical properties with respect to CHI-CMC wound dressings. Compared to the latter, CHI-CMC-AgNPs wound dressings yielded better antibacterial activity against the pathogen Escherichia coli. In biological assays, it was observed that manufactured CHI-CMC-AgNPs wound dressings were not toxic when in contact with human skin fibroblasts (Detroit). This study, then, suggests that this type of wound dressings with a chitosan matrix and carboxymethyl cellulose doped with biologically synthesized nanoparticles from the fungus Bjerkandera sp., may be an ideal alternative for the manufacture of new wound dressings.

Recent Advances on Bacterial Cellulose-Based Wound Management: Promises and Challenges

Wound healing is a therapeutic challenge due to the complexity of the wound. Various wounds could cause severe physiological trauma and bring social and economic burdens to the patient. The conventional wound healing treatments using bandages and gauze are limited particularly due to their susceptibility to infection. Different types of wound dressing have developed in different physical forms such as sponges, hydrocolloids, films, membranes, and hydrogels. Each of these formulations possesses distinct characteristics making them appropriate for the treatment of a specific wound. In this review, the pathology and microbiology of wounds are introduced. Then, the most recent progress on bacterial cellulose- (BC-) based wound dressing discussed and highlighted their antibacterial and reepithelization properties in vitro and in vivo wound closure. Finally, the challenges and future perspectives on the development of BC-based wound dressing biomaterials are outlined.

Iminoboronate-chitooligosaccharides hydrogels with strong antimicrobial activity for biomedical applications

The paper reports hydrogels prepared from chitooligosaccharides with different polymerization degrees (14 to 51), by crosslinking with 2-formylphenylboronicacid in three molar ratios of their functionalities. The structural, morphological and supramolecular characterization confirmed a hydrogelation mechanism based on self-assembling of newly formed imine units and porous morphology. Rheological measurements confirmed the formation of thixotropic hydrogels, and swelling tests indicated mass equilibrium swelling values up to 25 in water and 9 in phosphate buffer saline. The monitoring of enzymatic degradability demonstrated the enhancing of biodegradation rate as long as the polymerization degrees of the oligomers decreased, the mass loss increasing from 16% to 43%. In vivo and ex-vivo biocompatibility investigation on experimental mice showed no cytotoxic effect, and in vitro antimicrobial tests revealed remarkable antimicrobial properties on nine strains, with a maximum inhibition diameter of 49 mm on Aspergilius brasiliensis and very good results on Cladosporium cladosporioides, Penicillium crysogenum and different Candida species.

Bacterial cellulose-based composites for biomedical and cosmetic applications: Research progress and existing products

Bacterial cellulose (BC) is a promising unique material for various biomedical and cosmetic applications due to its morphology, mechanical strength, high purity, high water uptake, non-toxicity, chemical controllability, and biocompatibility. Today, extensive investigation is into the manufacturing of BC-based composites with other components such as nanoparticles, synthetic polymers, natural polymers, carbon materials, and biomolecules, which will allow the development of a wide range of biomedical and cosmetic products. Moreover, the addition of different reinforcement substances into BC and the organized arrangement of BC nano-fibers have proven a promising improvement in their properties for biomedical applications. This review paper highlights the progress in synthesizing BC-based composites and their applications in biomedical fields, such as wound healing, drug delivery, tissue engineering, and cancer treatment. It emphasizes high-performance BC-based materials and cosmetic applications. Furthermore, it presents challenges yet to be defeated and future possibilities for BC-based composites for biomedical and cosmetic applications.

Disposable Food Packaging and Serving Materials-Trends and Biodegradability

Food is an integral part of everyone’s life. Disposable food serving utensils and tableware are a very convenient solution, especially when the possibility of the use of traditional dishes and cutlery is limited (e.g., takeaway meals). As a result, a whole range of products is available on the market: plates, trays, spoons, forks, knives, cups, straws, and more. Both the form of the product (adapted to the distribution and sales system) as well as its ecological aspect (biodegradability and life cycle) should be of interest to producers and consumers, especially considering the clearly growing trend of “eco-awareness”. This is particularly important in the case of single-use products. The aim of the study was to present the current trends regarding disposable utensils intended for contact with food in the context of their biodegradability. This paper has summarized not only conventional polymers but also their modern alternatives gaining the attention of manufacturers and consumers of single-use products (SUPs).

Preparation and characterization of chitosan/Nano-ZnO composite film with antimicrobial activity

Chitosan is promising material for making food packaging film with antimicrobial activity. However, chitosan film usually has limited mechanical and antimicrobial properties and higher water solubility. To improve the performance of chitosan film, in this work, chitosan composite films were prepared by incorporating different sizes of zinc oxide particles of 5 μm, 100 nm, and 50 nm. The films were characterized by scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and mechanical analysis. Antimicrobial assay of the chitosan and CTS/nano-ZnO composite films against Escherichia coli and Staphylococcus aureus show that the composite chitosan films have better antibacterial activity. The film containing 0.3% of 50 nm zinc oxide particles showed the best inhibition rate, suggesting that smaller sizes of nano-ZnO particles have better bacteriostatic activity and potent application as an antibacterial additive ingredient.

Photoactive and antioxidant nanochitosan dots/biocellulose hydrogels for wound healing treatment

Bacterial infection and their resistance to known antibiotics delays wound healing. In this study, nanochitosan dots (nChiD) produced by gamma irradiation have been encapsulated in bacterial cellulose (BC) polymer matrix to study the antibacterial potentials of these nanocomposites and their possible usage in wound healing treatment (scratch assay). Detailed analyses show that nChiDs have disc-like shape and average diameter in the range of 40 to 60 nm depending of the applied dose. All nChiDs as well as BC-nChiD nanocomposites emit green photoluminescence independently on the excitation wavelengths. The new designed nanocomposites do not have a cytotoxic effect; antioxidant analysis shows their moderate radical scavenging activity whereas antibacterial properties show significant growth inhibition of strains mostly found in difficult-to-heal wounds. The obtained results confirm that new designed BC-nChiD nanocomposites might be potential agent in wound healing treatment.

Bactericidal and antioxidant bacterial cellulose hydrogels doped with chitosan as potential urinary tract infection biomedical agent

Therapy of bacterial urinary tract infections (UTIs) and catheter associated urinary tract infections (CAUTIs) is still a great challenge because of the resistance of bacteria to nowadays used antibiotics and encrustation of catheters. Bacterial cellulose (BC) as a biocompatible material with a high porosity allows incorporation of different materials in its three dimensional network structure. In this work a low molecular weight chitosan (Chi) polymer is incorporated in BC with different concentrations. Different characterization techniques are used to investigate structural and optical properties of these composites. Radical scavenging activity test shows moderate antioxidant activity of these biocompatible composites whereas in vitro release test shows that 13.3% of chitosan is released after 72 h. Antibacterial testing of BC–Chi composites conducted on Gram-positive and Gram-negative bacteria causing UTIs and CAUTIs (Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae) and encrustation (Proteus mirabilis) show bactericidal effect. The morphology analysis of bacteria after the application of BC–Chi shows that they are flattened with a rough surface, with a tendency to agglomerate and with decreased length and width. All obtained results show that BC–Chi composites might be considered as potential biomedical agents in treatment of UTIs and CAUTIs and as a urinary catheter coating in encrustation prevention.

Bacterial cellulose–chitosan composite with antibacterial and moderate antioxidant activity for potential UTI/CAUTI treatment and catheter coating in encrustation prevention.

Chemical Modification of Bacterial Cellulose for the Development of an Antibacterial Wound Dressing

Bacterial cellulose is a bacterially derived polymer with great potential for application in wound healing due to its innate properties such as high biocompatibility and biodegradability. In addition to this, it is naturally biosynthesized by bacteria as a hydrogel, which makes it an optimal substrate for the treatment of dry wounds, where additional moisture is required to facilitate the healing process. However, this polymer lacks antibacterial properties. As bacterial infections are becoming increasingly common and difficult to treat due to antimicrobial resistance, it is of crucial importance to develop strategies for the modification of cellulose to ensure protection against bacterial contamination. In this study, a green-chemistry approach was proposed for the functionalization of cellulose to introduce antibacterial functional groups. Two different active agents, namely glycidyl trimethylammonium chloride and glycidyl hexadecyl ether, were used for the covalent derivatization of the hydroxyl groups of glucose through a heterogeneous reaction in basic aqueous conditions. The modified material was chemically and mechanically characterized by solid-state techniques and rheological measurements. A biological assessment was then carried out both using bacterial cells and human keratinocytes. It was observed that the functionalization performed induced a reduction of approximately half of the bacterial population within 24 h of direct contact with Staphylococcus aureus subsp. aureus Rosenbach 6538PTM and Escherichia coli (Migula) Castellani and Chalmers ATCC® 8739TM (respectively, a reduction of 53% and 43% in the cell number was registered for the two strains). In parallel, cytotoxicity studies performed on keratinocytes (HaCaT cell line) showed cell viability in the range of 90 to 100% for up to 6 days of direct contact with both unmodified and modified samples. The morphology of the cells was also visually evaluated, and no significant difference was noted as compared to the control. Finally, the in vitro scratch assay evidenced good wound closure rates in the presence of the samples, with complete coverage of the scratched area after 5 days for both the modified cellulose and the positive control (i.e., keratinocytes growth medium). Overall, the modified hydrogel showed promising features, confirming its potential as an alternative substrate to develop a sustainable, antibacterial and biocompatible wound dressing.

Polydopamine coating of uncrosslinked chitosan as an acellular scaffold for full thickness skin grafts

There is an unmet need for skin grafting materials that are readily available for large area wounds, due to complex, lengthy and costly manufacturing processes that are not compatible with this type of wounds. Here we developed an acellular skin graft material based on surface coating of uncrosslinked porous (UCLP) chitosan. UCLP chitosan membranes had mechanical properties in ranges suitable for skin grafting. Polydopamine (PDA) coating improved hydrophilicity and resulted in a significant increase in attachment and metabolic activity of mammalian cells in vitro. PDA coating also decreased the attachment of pseudomonas aeruginosa - a common bacteria infecting skin wounds. Finally, the PDA-coated membranes were implanted in full thickness surgical wounds in a rodent model and resulted in complete would closure in 5 days. The current study suggests that PDA-coated UCLP chitosan membranes could be a simple and effective strategy for the development of grafting materials for large area wounds.

Polyanionic Composite Membranes Based on Bacterial Cellulose and Amino Acid for Antimicrobial Application

Ideal wound dressing materials should be active components in the healing process. Bacterial cellulose (BC) has attracted a great deal of attention as novel wound dressing materials; however, it has no intrinsic antimicrobial activity. To explore the practical application values of BC and develop novel wound dressing materials, a series of composite membranes based on BC and polymeric ionic liquids (BC/PILs, composed of BC, and PILs formed by choline and different amino acids) with antimicrobial activity were synthesized by an ex situ method. The physicochemical and antimicrobial properties and biocompatibility of these membranes were systematically investigated. The results indicated that BC/PIL membranes with excellent properties could be obtained by adjusting the concentration and type of PILs. Several kinds of BC/PIL membranes exhibited good biocompatibility and high antimicrobial activity against Gram-positive and Gram-negative bacteria and fungus. The anionic PILs played important roles in the antimicrobial activity of BC/PIL membranes. The obtained membranes provided a novel promising candidate for wound dressing materials.

A biocompatible bacterial cellulose/tannic acid composite with antibacterial and anti-biofilm activities for biomedical applications

Biofilm-associated infections are in a high rate of recurrence and biofilms show formidable resistance to current antibiotics, making them a growing challenge in biomedical field. In this study, a biocompatible composite was developed by incorporating tannic acid (TA) and MgCl₂ to bacterial cellulose (BC) for antimicrobial and anti-biofilm purposes. The morphology was investigated by scanning electron microscopy (SEM), and chemical structure were characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectra (XPS). In vitro release profiles of tannic acid revealed that the Mg²⁺ cross-links help impede the release of TA from BC matrix, while composite BC-TA lacked Mg²⁺ ionic cross-links, thus more TA was released from the hydrogel. The BC-TA-Mg composites also displayed strong antibacterial activity against S. aureus, E. coli and P. aeruginosa. Moreover, the composites significantly reduced biofilm formation of S. aureus and P. aeruginosa after 24 h incubation by ∼80% and ∼87%, respectively. As a consequence, the BC-TA-Mg composites are a very promising material for combating biofilm-associated infections in biomedical and public health fields.

Modification of different molecular weights of chitosan by p-Coumaric acid: Preparation, characterization and effect of molecular weight on its water solubility and antioxidant property

In this study, we modified three different molecular weights of chitosan by using p-Coumaric acid (p-CA) for enhancing their water solubility and antioxidant property. The chemical and physical properties of all native chitosan and its modified products were determined by Fourier transform spectroscopy (FTIR), ninhydrin assay, Folin-Ciocalteu reagent procedure, thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), high performance of liquid chromatography (HPLC), X-ray diffraction (XRD), water solubility and antioxidant property (both DPPH assay and reducing power assay). Results showed that the water solubility and antioxidant property of modified product decreases, when molecular weight of corresponding native chitosan increases. The obtained modified product had good solubility over a wide range of pH. Thermal analysis (TGA and DSC) showed the lower thermal stability of the modified product than that of corresponding native chitosan. XRD pattern revealed that the crystallinity was less in modified product than that of respective chitosan. The enhanced partially water solubility and antioxidant property of all modified chitosan products might be a great advantage, while applied in a wide range of applications in the form antioxidant property in food, biomedical and cosmetic industry.

Freeze-casting porous chitosan ureteral stents for improved drainage

As a new strategy for improved urinary drainage, in parallel to the potential for additional functions such as drug release and self-removal, highly porous chitosan stents are manufactured by radial, bi-directional freeze-casting. Inserting the porous stent in to a silicone tube to emulate its placement in the ureter shows that it is shape conforming and remains safely positioned in place, also during flow tests, including those performed in a peristaltic pump. Cyclic compression tests on fully-hydrated porous stents reveal high stent resilience and close to full elastic recovery upon unloading. The drainage performance of the chitosan stent is evaluated, using effective viscosity in addition to volumetric flow and flux; the porous stent's performance is compared to that of the straight portion of a commercial 8 Fr double-J stent which possesses, in its otherwise solid tube wall, regularly spaced holes along its length. Both the porous and the 8 Fr stent show higher effective viscosities, when tested in the silicone tube. The performance of the porous stent improves considerably more (47.5%) than that of the 8 Fr stent (30.6%) upon removal from the tube, illustrating the effectiveness of the radially aligned porosity for drainage. We conclude that the newly-developed porous chitosan ureteral stent merits further in vitro and in vivo assessment of its promise as an alternative and complement to currently available medical devices. STATEMENT OF SIGNIFICANCE: No papers, to date, report on porous ureteral stents, which we propose as a new strategy for improved urinary drainage. The highly porous chitosan stents of our study are manufactured by radial, bi-directional freeze casting. Cyclic compression tests on fully-hydrated porous stents revealed high stent resilience and close to full recovery upon unloading. The drainage performance of the chitosan is evaluated, using effective viscosity in addition to volumetric flow and flux, and compared to that of the straight portion of a commercial 8 Fr double-J stent. The performance of the porous stent improves considerably more (47.5%) than that of the 8 Fr stent (30.6%) upon removal from the tube, illustrating the effectiveness of the radially aligned porosity for drainage. While further studies are required to explore other potential benefits of the porous stent design such as antimicrobial behavior, drug release, and biodegradability, we conclude that the newly-developed porous chitosan ureteral stent has considerable potential as a medical device.

Architectural Effects of Star-Shaped "Structurally Nanoengineered Antimicrobial Peptide Polymers" (SNAPPs) on Their Biological Activity

In this work, the effect of two key structural parameters, number of arms and arm length, of star-shaped "structurally nanoengineered antimicrobial peptide polymers" (SNAPPs) on their antimicrobial activity and biocompatibility, is investigated. A library of star-shaped SNAPPs is prepared, containing varying arm numbers and arm lengths. Antimicrobial assays are then performed to assess the capacity of the SNAPPs to disrupt the membrane, inhibit the growth, and kill pathogenic bacteria. A major finding of the study is that increasing arm number and length of SNAPPs enhanced antimicrobial activity, which can be respectively attributed to the higher local concentrations of polypeptide arms and increased α-helical content. SNAPP architecture is shown to affect the bacteria membrane state and therefore mechanism of killing. Two more potent structures with up to twice the antimicrobial activity of the previously reported SNAPP are discovered in this process. Toxicities of the SNAPPs also increase with arm number and arm length, however therapeutic index calculations identified a 16-arm SNAPP and an easier to prepare 4-arm SNAPP as the best therapeutic agents. The biocompatibility of the SNAPP with the best biological activity is also evaluated in vivo, showing no markers of systemic damage in mice.

Nanocellulose-Based Antibacterial Materials

In recent years, nanocellulose-based antimicrobial materials have attracted a great deal of attention due to their unique and potentially useful features. In this review, several representative types of nanocellulose and modification methods for antimicrobial applications are mainly focused on. Recent literature related with the preparation and applications of nanocellulose-based antimicrobial materials is reviewed. The fabrication of nanocellulose-based antimicrobial materials for wound dressings, drug carriers, and packaging materials is the focus of the research. The most important additives employed in the preparation of nanocellulose-based antimicrobial materials are presented, such as antibiotics, metal, and metal oxide nanoparticles, as well as chitosan. These nanocellulose-based antimicrobial materials can benefit many applications including wound dressings, drug carriers, and packaging materials. Finally, the challenges of industrial production and potentials for development of nanocellulose-based antimicrobial materials are discussed.

Preparation and Properties of Sodium Carboxymethyl Cellulose/Sodium Alginate/Chitosan Composite Film

A sodium alginate/chitosan solution was prepared by dissolving sodium alginate, chitosan, and glycerol in an acetic acid solution. This solution was then combined with a sodium carboxymethyl cellulose solution and the mixture was cast onto a glass plate and dried at a constant temperature of 60 °C. Then, a carboxymethyl cellulose/sodium alginate/chitosan composite film was obtained by immersing the film in a solution of a cross-linking agent, CaCl2, and air-drying the resulting material. First, the most advantageous contents of the three precursors in the casting solution were determined by a completely random design test method. Thereafter, a comprehensive orthogonal experimental design was applied to select the optimal mass ratio of the three precursors. The composite film obtained with sodium alginate, sodium carboxymethyl cellulose, and chitosan contents of 1.5%, 0.5%, and 1.5%, respectively, in the casting solution displayed excellent tensile strength, water vapor transmission rate, and elongation after fracture. Moreover, the presence of chitosan successfully inhibited the growth and reproduction of microorganisms. The composite film exhibited antibacterial rates of 95.7% ± 5.4% and 93.4% ± 4.7% against Escherichia coli and Staphylococcus aureus, respectively. Therefore, the composite film is promising for antibacterial food packaging applications.

Characteristics of Curcumin-Loaded Bacterial Cellulose Films and Anticancer Properties against Malignant Melanoma Skin Cancer Cells

Curcumin-loaded bacterial cellulose films were developed in this study. Curcumin was absorbed into never-dried bacterial cellulose pellicles by 24-h immersion in solutions of curcumin in the range of 0.2–1.0 mg /mL. The curcumin-loaded bacterial cellulose pellicles were then air-dried and characterized. The mechanical properties of curcumin-loaded bacterial cellulose films, particularly the stretching properties, appeared to be lower than those of bacterial cellulose film. This was especially evident when the loading concentration of curcumin was higher than 0.4 mg/mL. Fourier-transform infrared spectroscopy analysis indicated an interaction between bacterial cellulose microfibrils and curcumin. Controlled release of curcumin was achieved in buffer solutions containing Tween 80 and methanol additives, at pH 5.5 and 7.4. Curcumin-loaded bacterial cellulose films prepared with curcumin solutions at concentrations of 0.5 and 1.0 mg/mL displayed antifungal activities against Aspergillus niger. They also exhibited anticancer activity against A375 malignant melanoma cells. No significant cytotoxic effect was observed against normal dermal cells, specifically, human keratinocytes and human dermal fibroblasts.

Preparation and properties of polylactic acid-tea polyphenol-chitosan composite membranes

To study the properties of composite membranes consisting of polylactic acid (PLA), tea polyphenol (TP), and chitosan (CS), the stretch film method was employed to make PLA-TP- CS composite membranes of different concentrations. By testing the density, mechanical properties, heat-sealing performance, water vapor permeability, and solubility of the pure PLA membrane and the composite membranes, the comprehensive performance of the composite membranes were analyzed with regard to the actual use value. The results show that, compared with the pure PLA membrane, adding TP and CS significantly increases the heat-sealing strength, water vapor permeability, and solubility of the composite membrane. When the composite membrane is used for the preservation of cherries, it is found that the composite membrane with the mass ratio of TP to CS of 3:7 can decrease the rotting rate and mass loss rate significantly, postpone the consumption of soluble solids and vitamin C, maintain the quality of the cherries, and extend the shelf life, thus proving its potential for application in food packaging.

Synthesis, Characterization, and Evaluation of Antimicrobial Activities of Chitosan and Carboxymethyl Chitosan Schiff-Base/Silver Nanoparticles

Schiff-bases of chitosan (CS) and carboxymethyl chitosan (CMCS)/silver nanoparticles (AgNPs) have been synthesized, characterized, and evaluated as antimicrobial agents against two Gram +ve bacteria (Bacillus cereus and Staphylococcus aureus) and two Gram −ve bacteria (Escherichia coli and Pseudomonas aeruginosa) in addition to Candida albicans as a fungus. The in situ reactions of CS and/or CMCS with some pyrazole aldehyde derivatives in acidic media containing silver nitrate to yield silver nanoparticles loaded onto CS and CMCS/Schiff-bases were carried out. Characterizations of the prepared compounds via FTIR spectroscopy, SEM, TEM, and TGA were carried out. Schiff-bases/silver nanoparticles of CS and CMCS showed higher antimicrobial activity than the blank CS and CMCS. The presence of AgNO3 (3% wt%) displayed high antibacterial efficiencies with inhibition zones in the extent of 19–39 mm. TEM analysis showed that the size of the silver nanoparticles is in the range of 4–28 nm for the prepared nanocomposites.

Cellulose ionics: switching ionic diode responses by surface charge in reconstituted cellulose films

Cellulose films as well as chitosan-modified cellulose films of approximately 5 μm thickness, reconstituted from ionic liquid media onto a poly(ethylene-terephthalate) (PET, 6 μm thickness) film with a 5, 10, 20, or 40 μm diameter laser-drilled microhole, show significant current rectification in aqueous NaCl.

Chitosan/Mimosa tenuiflora films as potential cellular patch for skin regeneration

Bio-composites films were prepared by casting and drying of aqueous solutions containing different weight ratios of chitosan and bark of Mimosa tenuiflora. The physico-chemical and functional properties of the films were characterized by scanning electron microscopy, dynamical mechanical analysis, wettability, cytotoxicity and in vitro antibacterial activities. The morphology studies confirmed that the presence of Mimosa tenuiflora change the surface of films. Moreover, the incorporation of Mimosa tenuiflora improved the thermal stability of the films, as it was indicated by the changes in the glass temperatures obtained. Water-uptake ability changed in relation to polymeric composition of film. This property increased by the addition of Mimosa tenuiflora to the film. Improved antibacterial properties were measured against Escherichia Coli and Micrococcus lysodeikticus or luteus. Finally, cytotoxicity was studied by MTT assay and the films were non-toxic. These preliminary results provide a cheap way to prepare chitosan/Mimosa tenuiflora films for wound healing and skin regeneration.

Development of Chitosan/Bacterial Cellulose Composite Films Containing Nanodiamonds as a Potential Flexible Platform for Wound Dressing

Chitosan/bacterial cellulose composite films containing diamond nanoparticles (NDs) with potential application as wound dressing are introduced. Microstructural studies show that NDs are uniformly dispersed in the matrix, although slight agglomeration at concentrations above 2 wt % is seen. Fourier transform infrared spectroscopy reveals formation of hydrogen bonds between NDs and the polymer matrix. X-ray diffraction analysis indicates reduced crystallinity of the polymer matrix in the presence of NDs. Approximately 3.5-fold increase in the elastic modulus of the composite film is obtained by the addition of 2 wt % NDs. The results of colorimetric analysis show that the composite films are transparent but turn to gray-like and semitransparent at high ND concentrations. Additionally, a decrease in highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) gap is also seen, which results in a red shift and higher absorption intensity towards the visible region. Mitochondrial activity assay using L929 fibroblast cells shows that the nanocomposite films are biocompatible (>90%) after 24 h incubation. Multiple lamellapodia and cell-cell interaction are shown. The results suggest that the developed films can potentially be used as a flexible platform for wound dressing.