Mucoadhesive Micro-/Nano Carriers in Ophthalmic Drug Delivery: an Overview

Drug-impregnated contact lenses via supercritical carbon dioxide: A viable solution for the treatment of bacterial and fungal keratitis

Keratitis is a corneal infection caused by various bacteria and fungi. Eye drop treatment of keratitis involves significant challenges due to difficulties in administration, inefficiencies in therapeutic dosage, and frequency of drug applications. All these are troublesome and result in unsuccessful treatment, high cost, time loss, development of drug resistance by microorganisms, and a massive burden on human health and the healthcare system. Most of the antibacterial and antifungal medications are non-water-soluble and/or include toxic drug formulations. Here, the aim was to develop drug-loaded contact lenses with therapeutic dosage formulations and extended drug release capability as an alternative to eye drops, by employing supercritical carbon dioxide (ScCO2) as a drug impregnation solvent to overcome inefficient ophthalmic drug use. ScCO2, known as a green solvent, has very low viscosity which provides high mass transfer power and could enhance drug penetration into contact lenses much better with respect to drug loading using other solvents. Here, moxifloxacin (MOX) antibiotic and amphotericin B (AMB) antifungal medicines were separately loaded into commercially available silicone hydrogel contact lenses through 1) drug adsorption from the aqueous solutions and 2) impregnation techniques via ScCO2 and their efficacies were compared. Drug impregnation parameters, i.e., 8-25 MPa pressure, 310-320 K temperature, 2-16-hour impregnation times, and the presence of ethanol as polar co-solvent were investigated for the optimization of the ScCO2 drug impregnation process. The highest drug loading and long-term release kinetic from the contact lenses were obtained at 25 MPa and 313 K with 2.5 h impregnation time by using 1 % ethanol (by volume). Furthermore, antibacterial/antifungal activities of the MOX- and AMB-impregnated contact lenses were effective against in vitro Pseudomonas aeruginosa (ATCC 10145) bacteria and Fusarium solani (ATCC 36031) fungus for up to one week. Consequently, the ScCO2 method can be effectively used to impregnate commercial contact lenses with drugs, and these can then be safely used for the treatment of keratitis. This offers a sustainable delivery system at effective dosage formulations with complete bacterial/fungal inhibition and termination, making it viable for real animal/human applications.

A Comprehensive Review of Nanoparticles: From Classification to Application and Toxicity

Nanoparticles are structures that possess unique properties with high surface area-to-volume ratio. Their small size, up to 100 nm, and potential for surface modifications have enabled their use in a wide range of applications. Various factors influence the properties and applications of NPs, including the synthesis method and physical attributes such as size and shape. Additionally, the materials used in the synthesis of NPs are primary determinants of their application. Based on the chosen material, NPs are generally classified into three categories: organic, inorganic, and carbon-based. These categories include a variety of materials, such as proteins, polymers, metal ions, lipids and derivatives, magnetic minerals, and so on. Each material possesses unique attributes that influence the activity and application of the NPs. Consequently, certain NPs are typically used in particular areas because they possess higher efficiency along with tenable toxicity. Therefore, the classification and the base material in the NP synthesis hold significant importance in both NP research and application. In this paper, we discuss these classifications, exemplify most of the major materials, and categorize them according to their preferred area of application. This review provides an overall review of the materials, including their application, and toxicity.

Nanosuspensions in ophthalmology: Overcoming challenges and enhancing drug delivery for eye diseases

This review article provides a comprehensive overview of the advancements in using nanosuspensions for controlled drug delivery in ophthalmology. It highlights the significance of ophthalmic drug delivery due to the prevalence of eye diseases and delves into various aspects of this field. The article explores molecular mechanisms, drugs used, and physiological factors affecting drug absorption. It also addresses challenges in treating both anterior and posterior eye segments and investigates the role of mucus in obstructing micro- and nanosuspensions. Nanosuspensions are presented as a promising approach to enhance drug solubility and absorption, covering formulation, stability, properties, and functionalization. The review discusses the pros and cons of using nanosuspensions for ocular drug delivery and covers their structure, preparation, characterization, and applications. Several graphical representations illustrate their role in treating various eye conditions. Specific drug categories like anti-inflammatory drugs, antihistamines, glucocorticoids, and more are discussed in detail, with relevant studies. The article also addresses current challenges and future directions, emphasizing the need for improved nanosuspension stability and exploring potential technologies. Nanosuspensions have shown substantial potential in advancing ophthalmic drug delivery by enhancing solubility and absorption. This article is a valuable resource for researchers, clinicians, and pharmaceutical professionals in this field, offering insights into recent developments, challenges, and future prospects in nanosuspension use for ocular drug delivery.

Transforming Medicinal Oil into Advanced Gel: An Update on Advancements

The present study delves into the evolution of traditional Ayurvedic oil preparations through innovative strategies to develop advanced gel formulations, aiming at amplifying their therapeutic efficacy. Ayurvedic oils have a rich historical context in healing practices, yet their conversion into contemporary gel-based formulations represents a revolutionary approach to augment their medicinal potential. The primary objective of this transformation is to leverage scientific advancements and modern pharmaceutical techniques to enhance the application, absorption, and overall therapeutic impact of these traditional remedies. By encapsulating the essential constituents of Ayurvedic oils within gel matrices, these novel strategies endeavor to improve their stability, bioavailability, and targeted delivery mechanisms. This review highlights the fusion of traditional Ayurvedic wisdom with cutting-edge pharmaceutical technology, paving the way for more effective and accessible utilization of these revered remedies in modern healthcare.

The Nanotech Potential of Curcumin in Pharmaceuticals: An Overview

It is safe to use Curcumin as a cosmetic and therapeutic ingredient in pharmaceutical products. For the uses mentioned above and for fundamental research, it is essential to obtain pure Curcumin from plant sources. There is a requirement for effective extraction and purification techniques that adhere to green chemistry standards for efficiency improvement, process safety, and environmental friendliness. Several outstanding studies have looked into the extraction and purification of Curcumin. This review thoroughly covers the currently available curcumin extraction, synthesis, and transformation techniques. Additionally, Curcumin's poor solubility and low absorption in the human body have limited its potential for pharmaceutical use. However, recent developments in novel curcumin formulations utilizing nanotechnology delivery methods have provided new approaches to transport and maximize the human body's curcumin absorption efficiency. In this review, we explore the various curcumin nanoformulations and the potential medicinal uses of nano curcumin. Additionally, we review the necessary future research directions to recommend Curcumin as an excellent therapeutic candidate.

Advancements in Nanogels for Enhanced Ocular Drug Delivery: Cutting-Edge Strategies to Overcome Eye Barriers

Nanomedicine in gel or particle formation holds considerable potential for enhancing passive and active targeting within ocular drug delivery systems. The complex barriers of the eye, exemplified by the intricate network of closely connected tissue structures, pose significant challenges for drug administration. Leveraging the capability of engineered nanomedicine offers a promising approach to enhance drug penetration, particularly through active targeting agents such as protein peptides and aptamers, which facilitate targeted release and heightened bioavailability. Simultaneously, DNA carriers have emerged as a cutting-edge class of active-targeting structures, connecting active targeting agents and illustrating their potential in ocular drug delivery applications. This review aims to consolidate recent findings regarding the optimization of various nanoparticles, i.e., hydrogel-based systems, incorporating both passive and active targeting agents for ocular drug delivery, thereby identifying novel mechanisms and strategies. Furthermore, the review delves into the potential application of DNA nanostructures, exploring their role in the development of targeted drug delivery approaches within the field of ocular therapy.

Mucoadhesive drug delivery systems: a promising noninvasive approach to bioavailability enhancement. Part II: formulation considerations

INTRODUCTION

Mucoadhesive drug delivery systems (MDDS) are specifically designed to interact and bind to the mucosal layer of the epithelium for localized, prolonged, and/or targeted drug delivery. Over the past 4 decades, several dosage forms have been developed for localized as well as systemic drug delivery at different anatomical sites.

AREAS COVERED

The objective of this review is to provide a detailed understanding of the different aspects of MDDS. Part II describes the origin and evolution of MDDS, followed by a discussion of the properties of mucoadhesive polymers. Finally, a synopsis of the different commercial aspects of MDDS, recent advances in the development of MDDS for biologics and COVID-19 as well as future perspectives are provided.

EXPERT OPINION

A review of the past reports and recent advances reveal MDDS as highly versatile, biocompatible, and noninvasive drug delivery systems. The rise in the number of approved biologics, the introduction of newer highly efficient thiomers, as well as the recent advances in the field of nanotechnology have led to several excellent applications of MDDS, which are predicted to grow significantly in the future.

Statistical optimization of voriconazole nanoparticles loaded carboxymethyl chitosan-poloxamer based in situ gel for ocular delivery: In vitro, ex vivo, and toxicity assessment

The research study reflects the development of novel voriconazole (VCZ) loaded nanoparticles (NPs) for prolonged delivery for the management of ocular diseases. The in situ ophthalmic gel was prepared by incorporating NPs into carboxymethyl chitosan (CMCh) and poloxamer. The central composite design was used to optimize the process for the preparation of nanoparticles by the o/w solvent evaporation method. The developed nanoparticles were evaluated for the encapsulation efficiency (89.6 ± 1.2%), particle size (219.3 ± 1.8 nm), polydispersity index (PDI, 0.1), zeta potential (- 21.1 ± 1.12 mV), saturation solubility, DSC study, and drug release. The etherification process grafts carboxyl surface functional groups, on chitosan, and was confirmed by FTIR and NMR studies. The developed CMCh-poloxamer based gelling system was found to be clear and transparent with gelation temperature varying from 33 to 40 °C. The nanoparticle-loaded gel containing CMCh demonstrated enhanced antifungal activity against Candida albicans. The optimized batch containing CMCh showed improved mucoadhesion by 2.86-fold compared to VCZ nanosuspension. The drug release was prolonged up to 8 h with an ex vivo study suggesting the enhanced permeation across goat cornea estimated via fluorescent microscope. The hen's egg chorioallantoic membrane study revealed that the formulation was non-irritant and tolerated by the chorioallantoic membrane. The present study concludes that the VCZ loaded nanoparticulate in situ ophthalmic gel using CMCh may act as a potential alternative for traditional eye drops.

Cannabidiol Loaded Topical Ophthalmic Nanoemulsion Lowers Intraocular Pressure in Normotensive Dutch-Belted Rabbits

Cannabidiol (CBD) is the major non-psychoactive and most widely studied of the cannabinoid constituents and has great therapeutic potential in a variety of diseases. However, contradictory reports in the literature with respect to CBD's effect on intraocular pressure (IOP) have raised concerns and halted research exploring its use in ocular therapeutics. Therefore, the current investigation aimed to further evaluate CBD's impact on the IOP in the rabbit model. CBD nanoemulsions, containing Carbopol^® 940 NF as a mucoadhesive agent (CBD-NEC), were prepared using hot-homogenization followed by probe sonication. The stability of the formulations post-moist-heat sterilization, in terms of physical and chemical characteristics, was studied for three different storage conditions. The effect of the formulation on the intraocular pressure (IOP) profile in normotensive Dutch Belted male rabbits was then examined. The lead CBD-NEC formulation (1% w/v CBD) exhibited a globule size of 259 ± 2.0 nm, 0.27 ± 0.01 PDI, and 23.2 ± 0.4 cP viscosity, and was physically and chemically stable for one month (last time point tested) at 4 °C, 25 °C, and 40 °C. CBD-NEC significantly lowered the IOP in the treated eyes for up to 360 min, with a peak drop in IOP of 4.5 mmHg observed at the 150 min time point, post-topical application. The IOP of the contralateral eye (untreated) was also observed to be lowered significantly, but the effect lasted up to the 180 min time point only. Overall, topically administered CBD, formulated in a mucoadhesive nanoemulsion formulation, reduced the IOP in the animal model studied. The results support further exploration of CBD as a therapeutic option for various inflammation-based ocular diseases.

Potential of pectin for biomedical applications: a comprehensive review

Pectin is a polysaccharide extracted from various plants, such as apples, oranges, lemons, and it possesses some beneficial effects on human health, including being hypoglycemic and hypocholesterolemic. Therefore, pectin is used in various pharmaceutical and biomedical applications. Meanwhile, its low mechanical strength and fast degradation rate limit its usage as drug delivery devices and tissue engineering scaffolds. To enhance these properties, it can be modified or combined with other organic molecules or polymers and/or inorganic compounds. These materials can be prepared as nano sized drug carriers in the form of spheres, capsules, hydrogels, self assamled micelles, etc., for treatment purposes (mostly cancer). Different composites or blends of pectin can also be produced as membranes, sponges, hydrogels, or 3D printed matrices for tissue regeneration applications. This review is concentrated on the properties of pectin based materials and focus especially on the utilization of these materials as drug carriers and tissue engineering scaffolds, including 3D printed and 3D bioprinted systems covering the studies in the last decade and especially in the last 5 years.

Functional Thermoresponsive Hydrogel Molecule to Material Design for Biomedical Applications

Temperature-induced, rapid changes in the viscosity and reproducible 3-D structure formation makes thermos-sensitive hydrogels an ideal delivery system to act as a cell scaffold or a drug reservoir. Moreover, the hydrogels’ minimum invasiveness, high biocompatibility, and facile elimination from the body have gathered a lot of attention from researchers. This review article attempts to present a complete picture of the exhaustive arena, including the synthesis, mechanism, and biomedical applications of thermosensitive hydrogels. A special section on intellectual property and marketed products tries to shed some light on the commercial potential of thermosensitive hydrogels.

Fungal Keratitis Treatment Using Drug-Loaded Hyaluronic Acid Microgels

Antifungal drug-loaded hyaluronic acid (HA) microgels using conjugation and encapsulation drug-loading techniques were utilized in the treatment of fungal keratitis. Natamycin (NAT) and amphotericin B (AMB) drugs were chemically linked to HA microgels by employing a chemical coupling agent to obtain conjugated (C-) HA:NAT and HA:AMB microgels. Also, these drugs were loaded into the HA microgel network during HA microgel preparation to attain encapsulated (E-) HA:NAT and HA:AMB microgels. The conjugation of drug molecules was confirmed by FT-IR spectra of bare and drug-loaded HA microgels. It was determined that the AMB loading amount was about 4-fold higher for E-HA:AMB in comparison to C-HA:AMB microgels. Furthermore, the antifungal activity of drug conjugated and encapsulated HA:NAT and HA:AMB microgels was tested on Fusarium sp. and compared with the effect of bare drug molecules as control for up to 15 days of incubation time by means of the disc diffusion technique. The antifungal activity of 200 μL at 20 mg/mL concentration of C-HA:NAT and C-HA:AMB microgels was not found to effectively inhibit Fusarium sp. growth after 1 day of incubation, whereas the same concentration of E-HA:NAT and E-HA:AMB microgels totally killed Fusarium sp. for up to 15 days. These E-HA:NAT and E-HA:AMB microgels show no cytotoxicity on the L929 fibroblast cells up to 1000 μg/mL concentration, whereas the free drug molecules destroy the cells even at 100 μg/mL concentration.

Impact of mucoadhesive agent inclusion on the intraocular pressure lowering profile of Δ9-tetrahydrocannabinol-valine-hemisuccinate loaded nanoemulsions in New Zealand white rabbits

The current study aimed to determine the effect of inclusion of a mucoadhesive agent on the intensity and duration of intraocular pressure (IOP) lowering activity of Δ⁹-tetrahydrocannabinol-valine-hemisuccinate (THC-VHS) loaded in a nanoemulsion (THC-VHS-NE) formulation. THC-VHS-NE formulation with Carbopol®940NF added as a mucoadhesive agent (THC-VHS-NEC) was prepared using hot-homogenization followed by probe sonication and characterized. A comparative evaluation of the IOP lowering activity of THC-VHS-NEC, THC-VHS-NE, THC-NEC, and commercial latanoprost ophthalmic solution, was undertaken in normotensive New Zealand white rabbits. The effect of pH, surfactant concentration, and autoclave process on the IOP lowering activity of THC-VHS-NEC was also studied. The formulation demonstrated desired viscosity, physicochemical properties, and autoclave process stability. The THC-VHS-NEC formulation showed a significant (p < 0.05) improvement in the duration of IOP lowering activity, compared to THC-NEC and THC-VHS-NE. Moreover, in this model, THC-VHS-NEC was more effective than commercially available latanoprost ophthalmic formulation, in terms of both duration and intensity of IOP lowering. A change in formulation pH, surfactant concentration, or sterilization process did not impact the IOP lowering activity of THC-VHS-NEC. Overall, inclusion of a mucoadhesive agent in THC-VHS-NE formulation, significantly increased the duration of activity, and could lead to a once- or twice- a day dosing regimen.

Applications of Chitosan-Alginate-Based Nanoparticles-An Up-to-Date Review

Chitosan and alginate are two of the most studied natural polymers that have attracted interest for multiple uses in their nano form. The biomedical field is one of the domains benefiting the most from the development of nanotechnology, as increasing research interest has been oriented to developing chitosan-alginate biocompatible delivery vehicles, antimicrobial agents, and vaccine adjuvants. Moreover, these nanomaterials of natural origin have also become appealing for environmental protection (e.g., water treatment, environmental-friendly fertilizers, herbicides, and pesticides) and the food industry. In this respect, the present paper aims to discuss some of the newest applications of chitosan-alginate-based nanomaterials and serve as an inception point for further research in the field.

Polymeric Micro/Nanocarriers and Motors for Cargo Transport and Phototriggered Delivery

Smart polymer-based micro/nanoassemblies have emerged as a promising alternative for transporting and delivering a myriad of cargo. Cargo encapsulation into (or linked to) polymeric micro/nanocarrier (PC) strategies may help to conserve cargo activity and functionality when interacting with its surroundings in its journey to the target. PCs for cargo phototriggering allow for excellent spatiotemporal control via irradiation as an external stimulus, thus regulating the delivery kinetics of cargo and potentially increasing its therapeutic effect. Micromotors based on PCs offer an accelerated cargo-medium interaction for biomedical, environmental, and many other applications. This review collects the recent achievements in PC development based on nanomicelles, nanospheres, and nanopolymersomes, among others, with enhanced properties to increase cargo protection and cargo release efficiency triggered by ultraviolet (UV) and near-infrared (NIR) irradiation, including light-stimulated polymeric micromotors for propulsion, cargo transport, biosensing, and photo-thermal therapy. We emphasize the challenges of positioning PCs as drug delivery systems, as well as the outstanding opportunities of light-stimulated polymeric micromotors for practical applications.

Biomedical Applications of Quaternized Chitosan

The natural polymer chitosan is the second most abundant biopolymer on earth after chitin and has been extensively explored for preparation of versatile drug delivery systems. The presence of two distinct reactive functional groups (an amino group at C2, and a primary and secondary hydroxyl group at C3 and C6) of chitosan are involved in the transformation of expedient derivatives such as acylated, alkylated, carboxylated, quaternized and esterified chitosan. Amongst these, quaternized chitosan is preferred in pharmaceutical industries owing to its prominent features including superior water solubility, augmented antimicrobial actions, modified wound healing, pH-sensitive targeting, biocompatibility, and biodegradability. It has been explored in a large realm of pharmaceuticals, cosmeceuticals, and the biomedical arena. Immense classy drug delivery systems containing quaternized chitosan have been intended for tissue engineering, wound healing, gene, and vaccine delivery. This review article outlines synthetic techniques, basic characteristics, inherent properties, biomedical applications, and ubiquitous challenges associated to quaternized chitosan.

Hyaluronic-Coated Albumin Nanoparticles for the Non-Invasive Delivery of Apatinib in Diabetic Retinopathy

Purpose

Apatinib (Apa) is a novel anti-vascular endothelial growth factor with the potential to treat diabetic retinopathy (DR); a serious condition leading to visual impairment and blindness. DR treatment relies on invasive techniques associated with various complications. Investigating topical routes for Apa delivery to the posterior eye segment is thus promising but also challenging due to ocular barriers. Hence, the study objective was to develop Apa-loaded bovine serum albumin nanoparticles (Apa-BSA-NPs) coated with hyaluronic acid (HA); a natural polymer possessing unique mucoadhesive and viscoelastic features with the capacity to actively target CD44 positive retinal cells, for topical administration in DR.

Methods

Apa-BSA-NPs were prepared by desolvation using glutaraldehyde for cross-linking. HA-coated BSA-NPs were also prepared and HA: NPs ratio optimized. Nanoparticles were characterized for colloidal properties, entrapment efficiency (EE%), in vitro drug release and mucoadhesive potential. In vitro cytotoxicity on rabbit corneal epithelial cells (RCE) was assessed using MTT assay, while efficacy was evaluated in vivo in a diabetic rat model by histopathological examination of the retina by light and transmission electron microscopy. Retinal accumulation of fluorescently labeled BSA-NP and HA-BSA-NP was assessed using confocal microscope scanning.

Results

Apa-HA-BSA-NPs prepared under optimal conditions showed size, PdI and zeta potential: 222.2±3.56 nm, 0.221±0.02 and -37.3±1.8 mV, respectively. High EE% (69±1%), biphasic sustained release profile with an initial burst effect and mucoadhesion was attained. No evidence of cytotoxicity was observed on RCE cells. In vivo histopathological studies on DR rat model revealed alleviated retinal micro- and ultrastructural changes in the topical HA-Apa-BSA-NP treated eyes with normal basement membrane and retinal thickness comparable to normal control and intravitreally injected nanoparticles. Improved retinal accumulation for HA-BSA-NP was also observed by confocal microscopy.

Conclusion

Findings present HA-Apa-BSA-NPs as a platform for enhanced topical therapy of DR overcoming the devastating ocular complications of the intravitreal route.