Influence of pH and salt concentration on functional properties of walnut protein from different extraction methods

Protein from rapeseed for food applications: Extraction, sensory quality, functional and nutritional properties

The application of rapeseed protein in human foods is limited by residual antinutritive components and poor sensory quality. The effects of five extraction protocols on rapeseed protein yield, sensory, functional and nutritional properties were systematically evaluated in this study. In particular, the potential of weakly acidic salt (pH 6.5, 150 mmol·L-1 MgCl2) extraction as a mild method for recovering edible rapeseed protein was investigated compared with conventional alkali extraction. All salt-extracted proteins showed above 40 % extraction yield and low antinutritional factor contents. They also had ideal amino acid patterns and better in vitro gastroduodenal digestibility than alkaline-extracted proteins. Additionally, the lighter color and odor, as well as better solubility, emulsion activity, foaming property, and water/oil holding capacity were found in weakly acidic salt extraction-ultrafiltered proteins. These findings suggest that weakly acidic salt extraction-ultrafiltration could be used for obtaining edible rapeseed protein, while extraction yield should be improved for scale application.

Simple and complex coacervation in systems involving plant proteins

Plant-based foods are gaining popularity as alternatives to meat and dairy products due to sustainability and health concerns. As a consequence, there is a renewed interest in the phase behaviour of plant proteins and of mixtures of plant proteins and polysaccharides, in particular in the cases where coacervation is found to occur, i.e., liquid-liquid phase separation (LLPS) into two phases, one of which is rich in biopolymers and one of which is poor in biopolymer. Here we review recent research into both simple and complex coacervation in systems involving plant proteins, and their applications in food- as well as other technologies, such as microencapsulation, microgel production, adhesives, biopolymer films, and more.

Cricket Protein Isolate Extraction: Effect of Ammonium Sulfate on Physicochemical and Functional Properties of Proteins

Crickets are known to be a promising alternative protein source. However, a negative consumer bias and an off-flavor have become obstacles to the use of these insects in the food industry. In this study, we extracted the protein from commercial cricket powder by employing alkaline extraction-acid precipitation and including ammonium sulfate. The physicochemical and functional properties of the proteins were determined. It was found that, upon including 60% ammonium sulfate, the cricket protein isolate (CPI) had the highest protein content (~94%, w/w). The circular dichroism results indicated that a higher amount of ammonium sulfate drastically changed the secondary structure of the CPI by decreasing its α-helix content and enhancing its surface hydrophobicity. The lowest solubility of CPI was observed at pH 5. The CPI also showed better foaming properties and oil-holding capacity (OHC) compared with the cricket powder. In conclusion, adding ammonium sulfate affected the physicochemical and functional properties of the CPI, allowing it to be used as an alternative protein in protein-enriched foods and beverages.

Advanced Insights into Walnut Protein: Structure, Physiochemical Properties and Applications

Facing extreme pressure from an increasing population and climate degeneration, it is important to explore a green, safe and environmentally sustainable food source, especially for protein-enriched diets. Plant proteins have gained much attention in recent years, ascribing to their high nutritional value and environmental friendliness. In this review, we summarized recent advances in walnut protein with respect to its geographical distribution, structural and physiochemical properties and functional attributes. As a worldwide cultivated and largely consumptive crop, allergies and some physicochemical limitations have also led to a few concerns about walnut protein. Through comprehensive analysis and discussion, some strategies may be useful for future research, extraction and processing of walnut protein.

Walnut Protein: A Rising Source of High-Quality Protein and Its Updated Comprehensive Review

Recently, plant protein as a necessary nutrient source for human beings, a common ingredient of traditional processed food, and an important element of new functional food has gained prominence due to the increasing demand for healthy food. Walnut protein (WP) is obtained from walnut kernels and walnut oil-pressing waste and has better nutritional, functional, and essential amino acids in comparison with other vegetable and grain proteins. WP can be conveniently obtained by various extraction techniques, including alkali-soluble acid precipitation, salting-out, and ultrasonic-assisted extraction, among others. The functional properties of WP can be modified for desired purposes by using some novel methods, including free radical oxidation, enzymatic modification, high hydrostatic pressure, etc. Moreover, walnut peptides play an important biological role both in vitro and in vivo. The main activities of the walnut peptides are antihypertensive, antioxidant, learning improvement, and anticancer, among others. Furthermore, WP could be applied in the development of functional foods or dietary supplements, such as delivery systems and food additives, among others. This review summarizes recent knowledge on the nutritional, functional, and bioactive peptide aspects of WP and possible future products, providing a theoretical reference for the utilization and development of oil crop waste.

Functional and structural properties of gliadin as influenced by pH, extraction protocols, and wheat cultivars

Gliadin, owing to its low cost, ease to extract, high foaming capacity, easily available and high surface hydrophobicity, has found a wide range of applications both in the food and pharmaceutical sectors. The functional and structural characteristics of gliadin extracted with four extraction protocols from six wheat cultivars were investigated in this study. The surface-active properties of gliadin protein as a function of pH, extraction protocols, and wheat cultivars were compared, including solubility, zeta-potential, foaming properties, emulsion properties, surface hydrophobicity and secondary structure. Overall gliadin extracted using different extraction protocols and from different wheat cultivars was found to be higher in β-turns (24.88-37.91 %), followed by β-sheet (12.81-22.37 %), α-helix (15.13-20.70 %) and lower in random coil (6.53-9.08 %). Varied pH ranges, wheat cultivars, and different extraction protocols were found to have a substantial impact on solubility, zeta potential, foaming stability, emulsion capacity and surface hydrophobicity. The foaming capacity was observed to be more influenced by extraction protocols than wheat cultivars. Emulsion stability showed statistically significant (p ≤ 0.05) influence between the wheat cultivars, and a non-significant (p ≥ 0.05) difference among extraction protocols. The functional properties of freeze-dried gliadin extracted using different protocols were found to be pH-dependent. A comprehensive understanding of how the structural, surface active and functional properties of gliadin are influenced by the extraction protocols and wheat cultivars will enable us to understand the gliadin better and broaden its use for both food and non-food applications.

Effect of Peroxyl Radical-Induced Oxidation on Functional and Structural Characteristics of Walnut Protein Isolates Revealed by High-Resolution Mass Spectrometry

The present study aims to investigate the structural and functional properties of oxidated walnut protein isolates (WPI) by 2,2′-azobis (2-amidinopropane) dihydrochloride (AAPH). The oxidation degree, changes in structural characteristics, processing properties, and protein modifications of WPI were measured. The results showed that oxidation significantly induced structural changes, mainly reflected by the increasing carbonyl content, and decreasing sulfhydryl and free amino groups. Moreover, the secondary structure of WPI was altered in response to oxidation, and large aggregates formed through disulfide cross-linking and hydrophobic interactions. Almost all the property indicators were significantly decreased by oxidation except the foaming property and water/oil holding capacity. Mass spectrometry analysis showed that 16 different modifications occurred in amino acid side chains, and most of the protein groups with higher numbers of modifications were found to be associated with allergies, which was further confirmed by the reduction in antigenicity of the major allergen (Jug r 1) in WPI. Meanwhile, we used oxidation-related proteins for gene ontology (GO) enrichment analyses, and the results indicated that 115, 204 and 59 GO terms were enriched in terms of biological process, molecular function, and cellular component, respectively. In conclusion, oxidation altered the groups and conformation of WPI, which in turn caused modification in the functional properties correspondingly. These findings might provide a reference for processing and storage of walnut protein foods.

Walnut pellicle phenolics greatly influence the extraction and structural properties of walnut protein isolates

This study investigated the effects of walnut phenolics and extraction methods on the composition and structural properties of walnut protein isolates (WPIs). Fluorescence quenching experiments showed that walnut phenolics could bind to walnut globulins, albumins, and glutelins with apparent affinity constants of 5.49 × 10⁴ M^-1, 1.71 × 10⁴ M^-1, and 3.10 × 10⁴ M^-1, respectively. However, the UV turbidity and dynamic light scattering (DLS) measurements indicated that phenolics could lead to the severe precipitation of globulins and albumins but not glutelins. The removal of pellicles could significantly increase the yield rate of salt-soluble globulins to approximately 72.8%. Furthermore, salt- and alkaline-extraction methods could produce comparable WPIs yields when using pellicle-free walnut kernels. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and size-exclusive chromatography indicated that the major protein compositions of the salt- and alkaline-extracted WPIs from pellicle-free walnut kernels were similar, while alkaline-extracted WPIs from kernels with pellicles exhibited phenolic-induced protein aggregation. Fourier transform infrared (FTIR) spectroscopy indicated that WPIs produced from kernels with pellicles contained more α-helix and less β-sheet structures than WPIs produced from pellicle-free kernels. These results confirm that walnut pellicle phenolics and the extraction methods could greatly influence the composition and structural properties of WPIs.

Pressurized water extraction - the fast and efficient method for isolation of bioactive proteins from Viscum album leaves

New strategies for the fast, efficient, and environmentally friendly extraction of proteins are required to isolate desired bioactive compounds from a technological point of view. In this study, utilization of the pressurized water extraction (PWE) at low temperature (40 °C) for isolation of mistletoe proteins was investigated. PWE effectiveness, based on protein fingerprints, were compared with those obtained by conventional extractions using 10 mmol L^-1 Tris-HCl buffer pH 8.3, 50 mmol L^-1 phosphate buffer pH 7, or deionized water. The extracts were precipitated using acetone, trichloroacetic acid (TCA), and 20% (w/v) TCA/acetone and analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. PWE was more or equally efficient for isolation of mistletoe proteins than evaluated conventional extraction methods. The proteomic analysis combining mass spectrometry and database searching confirmed the presence of 35 proteins in PWE extracts precipitated by acetone, which was the most compounds identified from all studied extracts. The PWE high extraction power was revealed for multiple viscotoxin isoforms and specific enzymes indispensable for the synthesis of terpenes.

Influence of different salts on rheological and functional properties of basil (Ocimum bacilicum L.) seed gum

In this paper, the influence of a variety of salts (NaCl, CaCl₂, and KCl) at different concentrations (0, 0.1, 0.5 and 1% w/w) on rheological and functional properties of basil seed gum (BSG) were investigated. BSG produced a high viscosity solution with yield stress, which was a function of salt type and concentration. In all samples, viscosity decreased as the electrostatic interactions between the BSG chains altered by salts. Flow behavior index increased by salt addition, which shows BSG had weaker shear-thinning behavior and worse mouthfeel in the presence of salts. The viscoelasticity of BSG strongly influenced by the addition of salt type as well as concentration. Larger cations (Ca⁺²) shield the electrostatic interaction between BSG chains more strongly compared to smaller cations as they have larger hydrated radius. As a result divalent salts decreased the viscosity and viscoelasticity more significantly. Emulsion capacity improved by salts addition, especially at high concentrations of salts. The foam capacity increased in the presence of CaCl₂ and KCl increased foaming capacity of BSG. The results suggest that the addition of the different types of salt can alter or modify the rheological and functional properties of BSG, depending on the salt concentration.

Application of experimental designs and response surface methods in screening and optimization of reverse micellar extraction

Reverse micellar extraction (RME) has emerged as a versatile and efficient tool for downstream processing (DSP) of various biomolecules, including structural proteins and enzymes, due to the substantial advantages over conventional DSP methods. However, the RME system is a complex dependency of several parameters that influences the overall selectivity and performance of the RME system, hence this justifies the need for optimization to obtain higher possible extraction results. For the last two decades, many experimental design strategies for screening and optimization of RME have been described in literature. The objective of this article is to review the use of different experimental designs and response surface methodologies that are currently used to screen and optimize the RME system for various types of biomolecules. Overall, this review provides the rationale for the selection of appropriate screening or optimization techniques for the parameters associated with both forward and backward extraction during the RME of biomolecules.

Production of proteases from organic wastes by solid-state fermentation: downstream and zero waste strategies

Production of enzymes through solid-state fermentation (SSF) of agro-industrial wastes reports high productivity with low investment. The extraction of the final product from the solid waste and solid disposal represent the main cost of the process. In this work, the complete downstream processes of SSF of two industrial residues for the production of proteases, soy fibre (SF) and a mixture of hair and sludge (HS), were studied in terms of activity recovery, using different extraction parameters (extracting solvent, ratio solid: solvent and extraction mode). Activity after lyophilisation was tested. Solid waste valorisation after extraction was studied using respiration techniques and biogas production tests, as part of a zero waste strategy. Results showed a maximum extraction yield of 91% for SF and 121% for HS, both in agitated mode and distilled water as extraction agent. An average activity recovery of 95 ± 6 and 94 ± 6% for SF and HS, respectively, was obtained after lyophilisation and redissolution. To reduce the cost of extraction, a ratio 1:3 w:v solid-solvent in static mode is advised for SF, and 1:2 w:v extraction ratio in agitated mode for HS, both with distilled water as extracting agent. Both composting and anaerobic digestion are suitable techniques for valorisation of the waste material.