Synthesis and functional properties of gelatin/CA-starch composite film: excellent food packaging material

Formulations based on pullulan and a derivative as coating material for the food sector

Carboxymethylated derivatives of pullulan (PU) were synthesized and evaluated as coating for the postharvest preservation of blueberries. Carboxymethylpullulan was obtained by etherification reaction with the substitution degrees of 0.52, 0.34, and 0.26 for CMP1, CMP2, and CMP3 respectively. Infrared spectroscopy and nuclear magnetic resonance results showed characteristic signals of the carbonyl group belonging to the carboxymethyl group. Thermal analysis showed that CMP1, CMP2, and CMP3 derivatives presented thermal stability values of 209.91 C, 214.73 C, and 225.52 °C, respectively, and were lower with respect to PU with Td of 238.84 °C. Furthermore, an increase in the glass transition temperature due to carboxymethylation was determined. The chemical modification decreased the contact angle with respect to PU (71.34°) with values for CMP1, CMP2, and CMP3 of 39.89°, 53.72° and 60.61°, respectively. The carboxymethylation also increased the water vapor permeability and mechanical properties of the films. In addition, it was found that the CMP molecules affected the optical properties. The application of CMP-based coatings reduced the mass loss and ripening rate of blueberries compared to native pullulan, therefore, packaging from CMP molecules could be used as a coating capable of delaying ripening and extending the shelf life of fruits.

Intelligent double-layer film based on gellan gum/modified anthocyanin/curcumin/sodium alginate/zinc oxide for monitoring shrimp freshness

In this study, intelligent double-layer films were prepared using modified black rice anthocyanin (MBRA)-curcumin (CUR)-gellan gum (GG) as the inner indicator layer and sodium alginate (ALG)‑zinc oxide (ZnO) as the outer antimicrobial layer. The bilayer films were successfully prepared, as revealed by scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction measurements. The mechanical characteristics, moisture content, and water vapor resistance of GG-MBRA/CUR1@ALG-ZnO, GG-MBRA/CUR2@ALG-ZnO, and GG-MBRA/CUR3@ALG-ZnO films showed significant enhancement compared to GG-MBRA/CUR3 and ALG-ZnO films. The bilayer films exhibited excellent pH responsiveness and reacted effectively to ammonia. The outer layer significantly improved the antioxidant and antibacterial properties of the inner layer. When the films were applied to shrimp, it was found that the double-layer films not only monitored the freshness of the shrimp in real-time but also were influential in extending the shelf life of the shrimp by about 1 d. Therefore, the double-layer film demonstrated potential as a smart packaging material for real-time monitoring of meat product freshness.

Enhancing bread preservation through non-contact application of starch-based composite film infused with clove essential oil nanoemulsion

In this study, we have successfully produced a corn starch-based composite film through the casting method, formulated with clove essential oil nanoemulsion (NCEO) and corn starch. The physical and chemical changes of the composite films were investigated at various concentrations (10 %, 20 % and 40 %) of NCEO. Furthermore, the non-contact preservation effects of the composite films on bread during 15-day storage were also examined in this study. As the concentration of NCEO increased, the composite films presented a gradual thinning, roughening, and yellowing in appearance. Following this, the water content, water vapor permeability rate, and elongation at break of the films decreased, while their hydrophobicity, tensile strength, antioxidant and antimicrobial activity increased accordingly. Through FT-IR, X-ray diffraction and thermal gravimetric analysis, it was demonstrated that NCEO has strong compatibility with corn starch. Additionally, the indices' analysis indicated that utilizing the composite film incorporating 40 % NCEO can significantly boost the shelf life and quality of bread. Moreover, it was revealed that application of the non-contact treatment with composite film could potentially contribute certain preservation effects towards bread. In light of these findings, the composite film with non-contact treatment exhibits potential as an effective, safe, and sustainable preservation technique for grain products.

Effect of electrostatic repulsion on barrier properties and thermal performance of gelatin films by carboxymethyl starch, and application in food cooking

Carboxymethyl starch (CST) was introduced to improve gelatin films and its practical application as edible high-performance films for food packaging and cooking was also investigated. The gelatin films modified by carboxymethyl starch exhibited the transparent appearance, tensile strength, barrier properties (oxygen, water vapor and UV light), and thermal performance (TGA, thermal shrinkage and heat-sealing strength). Resulting from the effect of electrostatic interaction modes on the properties of films, electrostatic repulsion could surpass electrostatic attraction in improving the tensile strength, oxygen barrier property and thermal stability of the films probably due to extensive physical entanglement without aggregation. Analysis of FTIR, zeta potential, interfacial dilatational rheology, shear rheological properties, XRD, Raman, SEM and AFM suggested that hydrogen bonding and electrostatic repulsion contributed to the excellent performance. The packaged food could also be cooked with the prepared film for porridge; and the film slightly influenced the shear rheological properties of porridge and imposed little effect on the odors (Electronic-Nose) of porridge. Hence, the gelatin films modified by carboxymethyl starch could potentially work as the edible inner packaging or the edible quantitative packaging for food, offer convenience for consumers, reduce the packaging waste and avoid an extra burden on environment.

Enhancing hamburger shelf life and quality using gallic acid encapsulated in gelatin/tragacanth gum complex coacervate

Considering mitigating oxidative degradation and inhibiting microbial proliferation in meat products, incorporating antioxidant and antimicrobial materials is critical to enhance shelf life, maintain quality, and ensure food safety. So, this study aimed to investigate the antimicrobial and antioxidant effects of encapsulated gallic acid on the quality of hamburgers during 30 days of storage. Gallic acid was microencapsulated in tragacanth gum/gelatin complex coacervate, and its encapsulation efficiency was optimized by the response surface method. The optimized encapsulation conditions were 1:4 polymer ratio (tragacanth to gelatin ratio); total polymer content, 0.9 %; pH, 3.5; and gallic acid content, 0.88 %, resulting in a 98 % encapsulation efficiency. The microcapsules were characterized using various techniques, including scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry. 400 ppm encapsulated gallic acid was added to the hamburger formulation, and various microbial properties, chemical analysis (peroxide value (POV) and thiobarbituric acid (TBA)), and sensory properties of the hamburgers were evaluated during storage. Results showed that gallic acid in the hamburgers decreased lipid oxidation from 0.126 to 0.103 mg MAD/kg in the TBA test and 12.73 to 11.03 meq/kg in the POV test during one month of storage. Also, phenolic compounds could prevent the growth and proliferation of spoilage microorganisms by damaging the microorganism cell walls and changing the metabolic processes. So, the amounts of total count and yeast and mold in the treated sample were lower than in the control sample. Significantly, adding encapsulated gallic acid did not negatively affect the flavor or overall evaluation of the samples. Overall, these findings suggested that encapsulated gallic acid is a suitable candidate to maintain chemical, microbial, and sensory characteristics of hamburgers over time.

Introducing graphene quantum dots in decomposable wheat starch-gelatin based nano-biofilms

This research aims to discover a viable substitute for the common harmful plastic packaging utilized in food products. Citric acid was employed as an accessible and risk-free precursor in synthesizing graphene quantum dots (GQDs). Using the efficient carbonization technique, GQDs were obtained and subsequently transferred to nano-biofilms in varying percentages relative to natural polymers. FT-IR, XRD, FE-SEM, EDX, and AFM analyses were conducted to examine the formation of the nano-biofilms. GQDs demonstrated optimal performance in the disk diffusion method and the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical approach. Adding GQDs to starch and gelatin composite improved the physical properties of nano-biofilms such as moisture contact, swelling index, and solubility. The transparency of the films was reduced by GQDs, which reduces the transmission of visible light and plays an important role in food protection. The packaging films' weight loss due to decomposition was examined after being buried in soil for 50 days, which relieved the eco-concerns of these packaging films. To evaluate the performance of the films in inhibiting food spoilage, cherries, and cucumbers were packed with a control film and the fabricated film containing 14 wt% of GQD. After 14 days, the modified nano-biofilm was able to maintain the freshness of the samples.

Synthesis and characterization of pH-responsive conducting polymer/Na-alginate/gelatin based composite hydrogels for sustained release of amoxicillin drug

Composite hydrogels of Na-Alginate (Na-ALG) and Gelatin (GEL) with conducting polymers (CPs) were synthesised using poly(o-phenylenediamine) (POPD), polyaniline (PANI), poly(1-naphthylamine (PNA) and poly(vinylenedine fluoride) (PVDF). The synthesised hydrogels were characterized using FTIR, scanning electron microscopy (SEM) rheology, swelling ability and in-vitro drug release characteristics. The purpose of this investigation was to determine whether these hydrogels could be used to deliver antibiotics for extended drug release. The composite hydrogels were loaded with antibiotic drug: amoxicillin in three different concentrations and the release was studied at intestinal fluid (pH 7.4) and gastric fluid (pH 1.2). Release kinetics was found to show best fit in zero order models at both pH values and showed prolonged release characteristics. The POPD-Na-ALG/GEL showed highest release at intestinal pH of 7.4, while PVDF-Na-ALG/GEL showed highest release at gastric pH at 1.2.

Starch-gelatin blend films: A promising approach for high-performance degradable food packaging

Packaging plays a vital role in safeguarding food from environmental factors and contamination. However, the overuse and improper disposal of non-biodegradable plastic packaging materials have led to environmental concerns and health risks. To address these challenges, the development of degradable food packaging films is crucial. Biodegradable polymers, including natural biopolymers like starch (ST) and gelatin (GE), have emerged as promising alternatives to traditional plastics. This review focuses on the utilization of ST-GE blends as key components in composite films for food packaging applications. We discuss the limitations of pure ST-GE films and explore methods to enhance their properties through the addition of plasticizers, cross-linkers, and nanoparticles. The blending of ST-GE, facilitated by their good miscibility and cross-linking potential, is highlighted as a means to improve film performance. The review also examines the impact of various additives on the properties of ST-GE blend films and summarizes their application in food preservation. By providing a comprehensive overview of ST-GE hybrid systems, this study aims to contribute to the advancement of sustainable and effective food packaging solutions.

Edible coatings and films for shelf-life extension of fruit and vegetables

The execution of the edible coatings and films for food preservation; vegetables, fruits, meat, and dry fruits has been ladened in history. The study of literature portrays enough pieces of evidence dating back from centuries of coatings or films being utilized for the conservation of numerous fruits and vegetables to stretch their average shelf-life. The mechanism that remains operative in extending the shelf-life of fruits and vegetables beyond the normal shelf-life is the controlled entry and exit of moisture and gases. The non- biodegradable packaging which is also non-sustainable can be substituted with compostable and edible coatings and films made up of natural biopolymers. Therefore, keeping in mind the environment and consumer safety, a score of research has been going on from former decades for the development of edible coatings and films with efficient shelf life-extending qualities. The films composed of proteins exhibit a good mechanical strength while the polysaccharide composed films and coatings show efficient gas blocking qualities, however, both lack moisture shielding attributes. These shortcomings can be fixed by combining them with lipids and or some appropriate hydrocolloids. The edible coatings and films have been integrated with various food products; however, they haven't been completely successful in substitution of the total fraction of their non-edible counterparts. The implementation of edible coatings and films have shown to serve an immense value in extending the shelf-life of fruits and vegetables along with being a sustainable and eco-friendly approach for food packaging.

Liquid and Pressure-Sensitive Adhesives Based on Cassava Starch and Gelatin Capsule Residue: Green Alternatives for the Packaging Industry

Natural polymer-based adhesives are green alternatives, necessary to reduce the problems impacted by synthetic adhesives. Starch and gelatin have extraordinary potential for the synthesis of biobased adhesives. Citric acid (CA), a natural acid, induces the crosslinking and hydrolyzing of both gelatin and starch. In this sense, this work deals with the use of gelatin capsule residues as a promising material to produce biobased adhesives in combination with cassava starch in the presence of different CA concentrations characterizing their mechanical, physicochemical and microstructural properties. Depending on CA concentration, formulations adjusted to different applications can be obtained such as liquid and pressure-sensitive adhesive films. The inclusion of CA allows us not only to improve the applicability of the system since it modifies the flowability of the adhesives as evidenced by the observed changes in the viscosity (from 158.3 to 90.3 for formulations with 20 and 80% CA, respectively). In addition, mechanical profiles showed that the inclusion of CA increased the adhesive bond strength (from 2230.7 to 2638.7 for formulations with 20 and 80% CA, respectively). Structural modifications induced by CA in adhesive formulations were highlighted by ATR-FTIR analysis.

Improvement of the UV-resistance capability of fish gelatin-oxidized starch film via inserting mycosporine-like amino acids

BACKGROUND

Mycosporine-like amino acids (MAAs) are known as the strongest solar guardians in nature.

RESULTS

In the present study, the extraction of MAAs from dried Pyropia haitanensis was achieved. Fish gelatin and oxidized starch composite films embedded with MAAs (0-0.3% w/w) were fabricated. The maximum absorption wavelength of the composite film appeared at 334 nm, which was consistent with MAA solution. Furthermore, the UV absorption intensity of the composite film was highly dependent on the concentration of MAAs. The composite film exhibited excellent stability during the 7-day storage period. The physicochemical features of composite film were demonstrated by the measurement of water content, water vapor transmission rate, oil transmission, and visual characteristics. Furthermore, in the actual anti-UV effect investigation, the increase in peroxide value and the acid value of grease under the films coverage was delayed. In the meantime, the decrease in ascorbic acid content in dates was postponed, and survivability of Escherichia coli was increased.

CONCLUSION

Our results suggest that fish gelatin-oxidized starch-mycosporine-like amino acids film (FOM film) with biodegradable and anti-ultraviolet properties has a high potential for usage in food packaging materials. © 2023 Society of Chemical Industry.

The relationship between molecular structure and film-forming properties of thermoplastic starches from different botanical sources

To illustrate the correlations between molecular structures and the film-forming properties of thermoplastic starch from various botanical sources, starches from cereal, tuber and legume were modified by thermoplastic extrusion and the corresponding thermoplastic starch films were prepared including thermoplastic corn starch (TCS), thermoplastic rice starch (TRS), thermoplastic sweet potato starch (TSPS), thermoplastic cassava starch (TCAS) and thermoplastic pea starch (TPES) films. TPES film displayed a higher tensile strength (6.28 MPa) and stronger water resistance, such as lower water solubility (15.70 %), water absorption (42.35 %), and water vapor permeability (0.285 g·mm·h-1·m-2·kPa-1) due to higher contents of amylose and B1 chains. TCAS showed a smoother and more amorphous film due to higher amylopectin content, resulting higher elongation at break and larger opacity. TCS film was the most transparent due to a compacter network and more ordered crystallinity structure, which was suit for the packaging of fresh vegetables and aquatic products, whereas TCAS film was the opaquest, which protected package foods from light such as meat products, etc. The outcome would provide an innovative theory to regulate accurately the functional properties of thermoplastic starch films for different food needs.

Accelerated Shelf-Life and Stability Testing of Hydrolyzed Corn Starch Films

Nonbiodegradable food packaging films are made from plastics such as polyethylene and polypropylene, which can take hundreds of years to decompose and create environmental hazards. On the other hand, biodegradable food packaging films are made from renewable materials such as corn starch or cellulose, that degrade within a few weeks or months and prove to be more sustainable and environmentally friendly. In this work, we used corn starch hydrolyzed (CSH) with α-amylase to prepare a film with biodegradable properties. The film was tested for 60 days at different accelerated temperatures and relative humidity (RH), 13 ± 2 °C and 65 ± 5% RH, 23 ± 2 °C and 45 ± 5% RH, and 33 ± 2 °C and 30 ± 5% RH, to test its durability and stability. Soil biodegradation of the CSH film was evaluated by visual appearance, microscopic observation, weight loss, scanning electron microscopy (SEM), and Fourier-transformed infrared spectroscopy (FTIR) every 6 days. The film was found to have strong hygroscopic properties and was able to last up to 10 months if it is maintained at 20 ± 5 °C and 45 ± 5% RH. After the biodegradability test for at least 30 days, the film showed a significantly higher weight loss rate and microbial activity on the surface of the film, which indicates that the film is biodegradable. The present work recommends biodegradable CSH films as an excellent environmentally friendly choice for dried foods packaging, due to their good shelf life at room temperature, which is beneficial when shipping and storing products, but these films are not suitable for foods with high moisture content.

Moth Bean, Gelatin, and Murraya Koenigii Leaves Extract-Based Film and Coating: Effect of Coating on Shelf and Quality of Solanum Melongena

Moth bean starch (MS), gelatin (GA), and Murraya koenigii leaves extract (ME) are blended at different compositions to prepare film and coating according to casting and dipping approaches. Different MS, GA, and ME compositions were used to synthesize films and coating. The film compositions (MS : GA: ME: 60 : 20 : 20 and MS : GA: ME:20 : 60 : 20) were represented in terms of F3 and F4, respectively. The results showed that F3 exhibited better physicochemical properties than other films. In addition, SEM images showed that all components of the films were uniformly mixed and formed smooth surface morphology without cracks and bubbles. FTIR results indicate that ME in the films induces interactions between the film components, causing an improvement in compactness. Moreover, an optimized film-forming solution was tested as a coating. Parameters such as skin tightness, weight loss, pH, titratable acidity, and sensory analysis were considered to check the quality of coated Solanum melongena during storage. The results show that the formulation effectively maintains the quality parameters during storage. Furthermore, it also notices that coating extends the shelf life of Solanum melongena by one week.

The Improved Properties of Carboxymethyl Bacterial Cellulose Films with Thickening and Plasticizing

This study aims to improve the thermal stability and mechanical properties of carboxymethyl bacterial cellulose (CMBC) composite films. Experiments were conducted by preparing bacterial cellulose (BC) into CMBC, then parametrically mixing sodium alginate/starch/xanthan gum/gelatin and glycerin/sorbitol/PEG 400/PEG 6000 with CMBC to form the film. Scanning electron microscopy, X-ray diffractometry, infrared spectroscopy, mechanical tests, and thermogravimetric analysis showed that the composite films had better mechanical properties and thermal stability with the addition of 1.5% CMBC (% v/v), 1% sodium alginate, and 0.4% glycerin. Tensile strength was 38.13 MPa, the elongation at break was 13.4%, the kinematic viscosity of the film solution was 257.3 mm²/s, the opacity was 4.76 A/mm, the water vapor permeability was 11.85%, and the pyrolysis residue was 45%. The potential causes for the differences in the performance of the composite films were discussed and compared, leading to the conclusion that CMBC/Sodium alginate (SA)/glycerin (GL) had the best thermal stability and mechanical properties.

The physical, mechanical, thermal and barrier properties of starch nanoparticle (SNP)/polyurethane (PU) nanocomposite films synthesised by an ultrasound-assisted process

This article reports on the ultrasound-assisted acid hydrolysis for the synthesis and evaluation of starch nanoparticles (SNP) as nanofillers to improve the physical, mechanical, thermal, and barrier properties of polyurethane (PU) films. During the ultrasonic irradiation, dropwise addition of 0.25 mol L^-1 H₂SO₄ was carried out to the starch dispersion for the preparation of SNPs. The synthesized SNPs were blended uniformly within the PU matrix using ultrasonic irradiation (20 kHz, 220 W pulse mode). The temperature was kept constant during the synthesis (4 °C). The nanocomposite coating films were made with a regulated thickness using the casting method. The effect of SNP content (wt%) in nanocomposite coating films on various properties such as morphology, water vapour permeability (WVP), glass transition temperature (Tg), microbial barrier, and mechanical properties was studied. The addition of SNP to the PU matrix increased the roughness of the surface, and Tg by 7 °C, lowering WVP by 60% compared to the PU film without the addition of SNP. As the SNP concentration was increased, the opacity of the film increased. The reinforcement of the SNP in the PU matrix enhanced the microbial barrier of the film by 99.9%, with the optimal content of SNP being 5%. Improvement in the toughness and barrier properties was observed with an increase in the SNP content of the film.

The Optimization of Gelatin Extraction from Chicken Feet and the Development of Gelatin Based Active Packaging for the Shelf-Life Extension of Fresh Grapes

Synthetic plastics are causing serious environmental and health problems due to which the concept of developing biodegradable food packaging has gained considerable attention. In this study, extraction of gelatin from chicken feet was optimized followed by characterization of gelatin. Chicken feet gelatin was used to develop biodegradable nanocomposite films by the incorporation of chitosan (CS) and zinc oxide (ZnO) nanoparticles (NPs). Gelatin nanocomposite films were used to increase the shelf-life of fresh grapes by determining the browning index, weight loss, and microbial profile of fresh grapes. A high yield (7.5%) of gelatin and Bloom strength (186 g) were obtained at optimized extraction conditions (pretreatment with 4.2% acetic acid and extraction at 66 °C for 4.2 h). Electrophoretic analysis of gelatin revealed the presence of α (130–140 kDa) and β chains (195–200 kDa), whereas a Fourier transformed infrared (FTIR) spectrometer confirmed the presence of amide A and B and amide I, II, and III. Incorporation of ZnO NPs in a gelatin–CS matrix improved the barrier and the mechanical and the thermal properties of films. Gelatin nanocomposite films with 0.3% ZnO NPs significantly reduced the weight loss (23.88%) and the browning index (53.33%) of grapes in comparison to control treatments. The microbial count in artificially inoculated grapes wrapped in gelatin nanocomposite films remained below 4 log CFU/mL until the fifth storage day in comparison to control treatments. The gelatin from poultry byproducts such as chicken feet can serve as an efficient biopolymer to develop biodegradable food packaging to enhance the shelf-life of perishable food products.

Synthesis, Characterization, and Optimization Studies of Starch/Chicken Gelatin Composites for Food-Packaging Applications

The indiscriminate use of plastic in food packaging contributes significantly to environmental pollution, promoting the search for more eco-friendly alternatives for the food industry. This work studied five formulations (T1–T5) of biodegradable cassava starch/gelatin films. The results showed the presence of the starch/gelatin functional groups by FT-IR spectroscopy. Differential scanning calorimetry (DSC) showed a thermal reinforcement after increasing the amount of gelatin in the formulations, which increased the crystallization temperature (Tc) from 190 °C for the starch-only film (T1) to 206 °C for the film with 50/50 starch/gelatin (T3). It also exhibited a homogeneous surface morphology, as evidenced by scanning electron microscopy (SEM). However, an excess of gelatin showed low compatibility with starch in the 25/75 starch/gelatin film (T4), evidenced by the low Tc definition and very rough and fractured surface morphology. Increasing gelatin ratio also significantly increased the strain (from 2.9 ± 0.5% for T1 to 285.1 ± 10.0% for T5) while decreasing the tensile strength (from 14.6 ± 0.5 MPa for T1 to 1.5 ± 0.3 MPa for T5). Water vapor permeability (WVP) increased, and water solubility (WS) also decreased with gelatin mass rising in the composites. On the other hand, opacity did not vary significantly due to the films’ cassava starch and gelatin ratio. Finally, optimizing the mechanical and water barrier properties resulted in a mass ratio of 53/47 cassava starch/gelatin as the most appropriate for their application in food packaging, indicating their usefulness in the food-packaging industry.

Sustainable biodegradable denim waste composites for potential single-use packaging

Every year a massive 2.16 million metric tons of denim jeans is globally wasted and mostly goes into landfill. Though denim is highly rich in cellulose, its valorisation has received little attention. A few attempts have previously shown prospects of denim in composites, though the ultimate products were non-compostable due to the nature of the chosen matrix. This research proposes a novel development of denim/cornstarch composite, maintaining 50/50 fractions, using different denim snippet size. A smoother denim/cornstarch composite morphology and higher tensile strength were observed when smaller denim snippets were used, whereas larger snippets produced voids and roughness and a higher hygroscopicity. Composite prepared from semi-gelatinised cornstarch showed a completely flexible structure similar to non-woven sheet. The chemical structure was observed identical in all of the composites and a good structural compatibility perceived. Individual peaks of both denim (1105 cm^-1 and 1705 cm^-1) and cornstarch (1081 cm^-1) were confirmed in all composite samples, either gelatinised or semi-gelatinised cornstarch used. Overall, this work reveals an eco-friendly approach to utilise consumed denim waste, with insight on possible fine-tuning through alteration of denim snippet size and cornstarch gelatinisation. The mechanical and moisture properties of the composites also suggest their potential application in single-use packaging.

Degradable photo-crosslinked starch-based films with excellent shape memory property

With the increasingly serious plastic pollution, people's demand for the multi-functional biodegradable plastics is becoming more and more urgent. Inspired by the crosslinked shape memory polymers, the crosslinked starch films were synthesized by inducing the decomposition of benzophenone into free radical and depriving hydrogen on starch macromolecules under UV irradiation, in order to gain a high shape memory performance. The results showed that a three-dimensional crosslinking network between starch macromolecule chains was formed. Compared with the uncrosslinked starch films, the photo-crosslinked films not only had higher mechanical property (tensile strength increased by 154%), but also had better water resistance (water contact angle from 60° to 87°) due to the reduction of free hydroxyl groups. In addition, the stable covalent bonds serving as netpoints endow photo-crosslinked films with great improvement in shape memory property, with nearly 180° bending recovery. More importantly, the maximum shape memory fixity ratio (R_f) and shape memory recovery ratio (R_r) under stretch deformation were 96.5% and 99.8%, respectively. And the R_f and R_r could reach 94.6% and 79.8% even at higher strain. In all, the excellent shape memory performance and good degradability crosslinked starch films, which have great potential application in disposable heat-shrinkable packaging materials.

Green Coating Polymers in Meat Preservation

Edible coatings, including green polymers are used frequently in the food industry to improve and preserve the quality of foods. Green polymers are defined as biodegradable polymers from biomass resources or synthetic routes and microbial origin that are formed by mono- or multilayer structures. They are used to improve the technological properties without compromising the food quality, even with the purpose of inhibiting lipid oxidation or reducing metmyoglobin formation in fresh meat, thereby contributing to the final sensory attributes of the food and meat products. Green polymers can also serve as nutrient-delivery carriers in meat and meat products. This review focuses on various types of bio-based biodegradable polymers and their preparation techniques and applications in meat preservation as a part of active and smart packaging. It also outlines the impact of biodegradable polymer films or coatings reinforced with fillers, either natural or synthesized, via the green route in enhancing the physicochemical, mechanical, antimicrobial, and antioxidant properties for extending shelf-life. The interaction of the package with meat contact surfaces and the advanced polymer composite sensors for meat toxicity detection are further considered and discussed. In addition, this review addresses the research gaps and challenges of the current packaging systems, including coatings where green polymers are used. Coatings from renewable resources are seen as an emerging technology that is worthy of further investigation toward sustainable packaging of food and meat products.

Underutilized finger millet crop for starch extraction, characterization, and utilization in the development of flexible thin film

Three different varieties of finger millets (VL-315, VL-324, and VL-347) cultivated in Uttrakhand, India, were used to extract high purity starch using the alkali soaking approach and investigated physicochemical and structural properties. VL-315, VL-324, and VL-347, contain 78 ± 0.35%, 79 ± 0.35%, and 87 ± 0.35% starch, respectively, of which 39.03 ± 0.35%, 37.2 ± 0.35%, and 33.5 ± 0.35% are the amylose contents, respectively. Chemical composition analysis exhibited the level of ash and moisture content in the dry basis of 0.0031 ± 0.01% to 0.035 ± 0.05%, and 12.52 ± 0.8% to 12.92 ± 0.2%, respectively. The solubility and swelling range of VL-315 is 1.3-4.3% and 16.54-10.3 (g/g), respectively, which significantly differ from VL-324 and VL-347. XRD analysis revealed that extracted starch showed a typical A-type crystalline network with a crystallinity range of 17.7-19.3%, which remarkably influenced retro gradation tendencies of starch. SEM demonstrated that extracted starch granules are polyhedral shape with a smooth surface. Finger millet starch has enormous potential in the development of starch-based edible film and coating on food items. In the present work, extracted finger millet starch was studied with the aim of developing a thin and flexible food packaging film. From the results, it was observed that the fabricated films had excellent functional properties, including solubility, swelling index, and water vapor permeability, which could eliminate petroleum-based packaging materials, and gives food materials an extra shelf life, and improve overall food quality.

Biodegradable composite films/coatings of modified corn starch/gelatin for shelf life improvement of cucumber

Composite films comprising modified corn starch and gelatin were developed using a solvent casting technique. The effect of varied content of citric acid and gelatin on the functional properties of the corn starch and composite films, respectively, was investigated. Modified corn starch films enriched with 5% citric acid presented excellent film properties like solubility, swelling index, water vapor permeability, and mechanical property as compared to other films. Similarly, composite films enriched with a ratio (4:1) also exhibited excellent film properties like mechanical and opacity than other composite films. FTIR results confirmed the cross linking among the modified corn starch chains, which is responsible for the enhancement in the film properties. From SEM results, it was noticed that the modified corn starch films exhibited slightly rougher, less shiny than the composite films. Efficacy of the composite solution as a coating formulation in terms of the quality and shelf life of the cucumber investigated. From the results, it was noted that the composite film forming solution as a coating formulation has the potential to extend the shelf-life of the cucumbers additionally up to 16 days.

Synthesis and characterization of starch nanocellulosic films incorporated with Eucalyptus globulus leaf extract

Carrot cellulose nano fibers (CNF) have been extracted from carrot pulp using acid hydrolysis process. The size of the CNF was in the range of 6.33-58.77 nm. Starch nano-composite films were manufactured using varying concentration of CNF (5%, 10%, 15%, 20%) and mechanical properties of the films were studied at relative humidity 50% and 75%. Nano-composite films were manufactured using Eucalyptus globulus leafs extract (1%, 2%, 3%, 4%). Physio-chemical properties, antioxidant, antimicrobial, morphological and crystalline properties of the films were studied. Nano-composite films with 4% Eucalyptus globulus leafs extract was best to provide better barrier, antioxidant properties to grapes when wrapped and stored at room temperature (25 ± 2)°C for 7 days and refrigerator temperature (4 ± 1)°C for 28 days. Wrapped grapes with NCC/Eucalyptus globulus leaf extract stored for 28 days either at 25 °C or 4 °C had bacterial surface loads reduced up to 5 orders of magnitude compared to non-wrapped samples and had 4 orders of magnitude less bacterial surface loads than at the beginning of the experiments. Wrapped grapes with NCC/Eucalyptus globulus leaf extract significantly reduced the growth of Escherichia coli, Listeria monocytogenes, Salmonella typhimurium and Penicillium spp. when the cells of these organisms were spiked onto grapes and the samples were stored either at (25 ± 2) °C or (4 ± 1) °C for 28 days. The results showed that nano-composite with 4% Eucalyptus globulus leafs extract films have immense potential as food packaging/wrapping material.

Review on Polysaccharides Used in Coatings for Food Packaging Papers

Paper and board show many advantages as packaging materials, but the current technologies employed to obtain adequate barrier properties for food packaging use synthetic polymers coating and lamination with plastic or aluminium foils—treatments which have a negative impact on packaging sustainability, poor recyclability and lack of biodegradability. Recently, biopolymers have attracted increased attention as paper coatings, which can provide new combinations in composite formulas to meet the requirements of food packaging. The number of studies on biopolymers for developing barrier properties of packaging materials is increasing, but only a few of them are addressed to food packaging paper. Polysaccharides are viewed as the main candidates to substitute oil-based polymers in food paper coating, due to their film forming ability, good affinity for paper substrate, appropriate barrier to gases and aroma, and positive effect on mechanical strength. Additionally, these biopolymers are biodegradable, non-toxic and act as a matrix for incorporation additives with specific functionalities for coated paper (i.e., active-antimicrobial properties). This paper presents an overview on the availability and application of polysaccharides from vegetal and marine biomass in coatings for foods packaging paper. The extraction methods, chemical modification and combination routes of these biopolymers in coatings for paper packaging are discussed.

The effect of active coating and refrigerated storage on the quality of avocado cultivar, Quintal

Postharvest technologies, such as the application of coatings, could contribute to the extension of the shelf life of avocado fruit. The objective of the present research was to evaluate the effects of coating, based on agro-industrial co-products (citrus pectin, broken rice grain flour, and cellulosic rice skin nanofiber), sorbitol and potassium sorbate, on the quality of avocado (cultivar 'Quintal') stored under refrigeration. The coating contributed to a longer conservation of the green color of avocado, both peel and pulp, and significantly reducing the respiration rate of the coated fruit, which was 35% lower than that of the control fruit. The coated fruit was firmer and, possibly, the addition of cellulosic nanofiber contributed to the maintenance of this firmness. Regarding the bioactive compounds, there was no difference (p > 0.05) among the coated and control fruit. During refrigerated storage, total phenolic compounds content increased (p < 0.05) from 311.44 ± 25.89 to 800.25 ± 160.74 mg kg^-1 gallic acid equivalents (GAE) in the control fruit, and from 242.86 ± 52.33 to 584.75 ± 125.57 mg kg^-1 GAE in the coated fruit. It was concluded that the shelf life of avocado (cultivar 'Quintal') could be extended and ripening delayed by a minimum of 8 days, by applying a coating formulated with rice flour, pectin, sorbitol, potassium sorbate, and cellulosic rice skin nanofiber.

Moth bean starch (Vigna aconitifolia): isolation, characterization, and development of edible/biodegradable films

In the current work, moth bean starch was separated from the moth bean seeds which were cultivated in the semi arid regions of Haryana and Rajasthan, India using alkali treatment technique and characterized. Isolated and purified moth bean starch comprised (12.89-20.37%) amylose, 0.8% protein, 0.4% ash, swelling index and solubility were 10.8-14.7% and 6.4-9.8% respectively. For wrapping application, starch was modified using citric acid as cross linking agent (1-7% w/w of total starch) and film was made using casting method, and investigated the influence of citric acid on the functional properties of the films such as moisture content, solubility, swelling index, water vapor permeability and mechanical property. Significant difference in the functional properties among native and modified moth bean starch films was noticed. Interactions among starch chains due to cross linking in the modified starch films were reported using FTIR spectra. Surface micrographs of both purfied starch granules and films were studied using scanning electron microscopy. From the outcomes, it was exhibited that obtained starch granules has range large to small size with distorted cylinder and oval shapes. While cross linked starch films showed compact, slightly rough and homogeneous surface. Tested modified moth bean starch films containing citric acid (CA) and sorbitol were utilized as wrapping films to improve the shelf life of fresh lemon. Outcomes showed that the film contains 5% CA could be most promising wrapping materials for lemon that enhanced the shelf life of lemon additionally up to 12 days.