Purification and characterization of polygalacturonase from Aspergillus fumigatus MTCC 2584 and elucidating its application in retting of Crotalaria juncea fiber

Application of Thermomyces lanuginosus polygalacturonase produced in Komagataella phaffii in biomass hydrolysis and textile bioscouring

In this work, the polygalacturonase (TL-PG1) from the thermophilic fungus Thermomyces lanuginosus was heterologously produced for the first time in the yeast Komagataella phaffii. The TL-PG1 was successfully expressed under the control of the AOX1 promoter and sequentially purified by His-tag affinity. The purified recombinant pectinase exhibited an activity of 462.6 U/mL toward polygalacturonic acid under optimal conditions (pH 6 and 55 ˚C) with a 2.83 mg/mL and 0.063 μmol/minute for Km and Vmax, respectively. When used as supplementation for biomass hydrolysis, TL-PG1 demonstrated synergy with the enzymatic cocktail Ctec3 to depolymerize orange citrus pulp, releasing 1.43 mg/mL of reducing sugar. In addition, TL-PG1 exhibited efficiency in fabric bioscouring, showing potential usage in the textile industry. Applying a protein dosage of 7 mg/mL, the time for the fabric to absorb water was 19.77 seconds (ten times faster than the control). Adding the surfactant Triton to the treatment allowed the reduction of the enzyme dosage by 50% and the water absorption time to 6.38 seconds. Altogether, this work describes a new versatile polygalacturonase from T. lanuginosus with the potential to be employed in the hydrolysis of lignocellulosic biomass and bioscouring.

Impact of Stabilization Technology on the Extraction Yield and Functionality of Macroconstituents from Biomass: A Systematic Review

Biomass contains different macroconstituents (polysaccharides, lipids, and proteins) with nutritional and functional properties. However, after harvest or processing, stabilization of biomass is necessary to preserve the macroconstituents from degradation by microbial growth and enzymatic reactions. Because these stabilization methods affect the structure of the biomass, extraction of valuable macroconstituents can be impacted. Literature, in general, focuses on either stabilization or extraction, but systematic information on the interlinkage between these processes has rarely been reported. This review summarizes recent research on physical, biological, and chemical stabilization methods on macroconstituent extraction yields and functionalities. Often, freeze drying as a stabilization method resulted in a good extraction yield and functionality, independent of the macroconstituent. Less documented treatments, such as microwave drying, infrared drying, and ultrasound stabilization, result in better yields compared to conventional physical treatments. Biological and chemical treatments were rarely performed but could be promising as stabilization methods before performing an extraction step.

Effect of Fermentation Response on Biosynthesis of Endopolygalacturonase from a Potent Strain of Bacillus by Utilizing Polymeric Substrates of Agricultural Origin

Endopolygalacturonase (EndoPGase), EC: 3.2.1.15. is one of the crucial pectinases belonging to the class of carbohydrase. The catalytic action of EndoPGase captivates the attention of the production of this extremely valuable catalyst in the industrial sector. The main focus was to ascertain a potential bacterial candidate for endoPGase production. The isolated bacterial strain was further identified by 16S rRNA gene sequencing. The parameters for enzyme biosynthesis were optimized by a single and multiple factor approach at a time. The results of our investigation led to the identification of a potent strain of Bacillus subtilis NR2 [strain 168]. The sequence of 16S rRNA amplified from the isolated bacterium has been submitted to GenBank under accession number ON738697. The strain was found active for pectic enzyme activity under shaking- flask fermentation at pH 5.0 and 50 °C temperature of incubation. Among all monomeric and polymeric substrates (inducer-substrates), citrus pectin, followed by potato starch and pectin (Sigma) were considered the best enzyme inducers at 1% concentration. In comparison, an increased wheat bran concentration at 5% was proved to be ideal for EndoPGase biosynthesis Moreover, an increasing trend in enzyme activity was observed with the increasing concentration of inducer. The combined effect of three variables (pH, inducer-substrates, and inducer-substrate concentration) was explored by response surface methodology (RSM) involving a Box–Behnken design (BBD). Based on the results, we concluded that the soil-isolated B. subtilis can be effectively utilized for commercial-scale pectinase enzyme biosynthesis.

Thermostable and organic solvent-tolerant acid pectinase from Aspergillus terreus FP6: purification, characterization and evaluation of its phytopigment extraction potential

The present study discusses the purification, characterization and application of pectinase from Aspergillus terreus FP6 in fruit pigment extraction. By the four-step purification involving precipitation, dialysis, ion-exchange chromatography, gel filtration chromatography, a 20.85-fold purification of the enzyme to homogeneity was achieved. The apparent molecular mass of the pectinase was 47 kDa, as found by sodium dodecyl sulphate-polyacrylamide gel electrophoresis. The optimum activity of the enzyme was recorded at pH 6.0 and 50 °C. The enzyme retained 80.3% and 79.1% residual activity, respectively at pH 6.0 and 50 °C for 90 min. The pectinase was best functional in the presence of toluene and retained its activity for 30 min. Cu²⁺ and Co²⁺ acted as enzyme activators, while Ca²⁺, β-mercaptoethanol, dimethyl sulfoxide and ethylenediaminetetraacetic acid proved to be the inhibitors. The K _m and V _max values of the pectinase with pectin as substrate were 0.002 mM and 27.39 U/mL, respectively thus indicating the high enzyme affinity towards the substrate. After 30-min treatment of the grape skin with the partially purified enzyme, microscopic observation revealed that a short time of the enzymatic treatment resulted in substantial loss of pigment and shrinkage of the grape skin cells thereby highlighting the high efficiency of the pectinase. The current study implies that the A. terreus FP6 pectinase may be applied as a bio-agent in the food and beverage industries and has the potential to replace harmful solvents by promoting a greener approach to extract plant pigments.

An Exo-Polygalacturonase Pgc4 Regulates Aerial Hyphal Growth and Virulence in Fusarium oxysporum f. sp. cubense race 4

Fusarium oxysporum f. sp. cubense race 4 (Foc4) causes Fusarium wilt that affects banana plants, and hence, the molecular mechanisms of its virulence need to be investigated. We purified an exo-polygalacturonase (exo-PG), Pgc4, from Foc4. Pgc4 has an apparent molecular weight of 50.87 kDa based on sodium dodecyl sulphate–polyacrylamide gel electrophoresis. We further performed its sequence analysis and biochemical characterization. The two pgc4 genes encoding Pgc4 from Foc4 and Foc1 were 1434 bp in length and encoded 477 amino acids with differences, due to some nucleotide differences between the two. The Km and Vmax values of Pgc4 purified from Foc4 were determined to be 0.45 mg/mL and 105.26 Units·mg·protein⁻¹ ·min⁻¹, respectively. The recombinant proteins, r-Foc1-Pgc4 and r-Foc4-Pgc4, were expressed and purified from Pichia pastoris and showed optimal Pgc4 activity at 55 °C and pH 4.0; both could induce tissue maceration and necrosis in the “Guangfen-1” and “Baxi” varieties of banana but to a different extent. Phenotypic assays and complementation analyses revealed that, compared to the wild-type, the generated Foc4Δpgc4 mutant strain showed a lower aerial hyphal growth, grew slower, and had a reduced virulence. Therefore, our results demonstrate the function of Pgc4 as a pathogenicity factor of Foc4.

Pectinolytic Bacterial Consortia Reduce Jute Retting Period and Improve Fibre Quality

Jute fibre is the second most important fibre next to cotton. It is obtained from the bark of plant through microbial retting process. Here we report optimized microbial retting protocol that can lower retting period and produce high fibre quality. A total of 451 bacterial colonies have been isolated from five jute retting water samples in Bangladesh. Higher pectinolytic bacterial isolates were predominant in the later stage of jute retting. Out of these, 168 isolates have been screened by both semi-quantitative and quantitative pectinase, xylanase and cellulase enzyme assay. Among them, 144 isolates have been selected on the basis of extra cellular enzyme activity of these three enzymes. 16 s ribosomal gene sequencing analysis identified 2 phyla- Firmicutis (80.55%) and Proteobacteria (19.45%). To check the synergistic and antagonistic effect 10 selected isolates were tested in 167 different combinations. Three best combinations were identified that lowered retting period from 18–21 days to 10 days producing high quality fibre in both laboratory and field trial. This improved retting technology can be adopted in industrial scale for the production of quality jute fibre in a controlled condition in reduced water quantity without polluting the environment.

Overexpression and Biochemical Characterization of an Endo-α-1,4-polygalacturonase from Aspergillus nidulans in Pichia pastoris

Pectinases have many applications in the industry of food, paper, and textiles, therefore finding novel polygalacturonases is required. Multiple sequence alignment and phylogenetic analysis of AnEPG (an endo-α-1,4-polygalacturonase from Aspergillus nidulans) and other GH 28 endo-polygalacturonases suggested that AnEPG is different from others. AnEPG overexpressed in Pichia pastoris was characterized. AnEPG showed the highest activity at pH 4.0, and exhibited moderate activity over a narrow pH range (pH 2.0-5.0) and superior stability in a wide pH range (pH 2.0-12.0). It displayed the highest activity at 60 °C, and retained >42.2% of maximum activity between 20 and 80 °C. It was stable below 40 °C and lost activity very quickly above 50 °C. Its apparent kinetic parameters against PGA (polygalacturonic acid) were determined, with the K_m and k_cat values of 8.3 mg/mL and 5640 μmol/min/mg, respectively. Ba²⁺ and Ni²⁺ enhanced activity by 12.2% and 9.4%, respectively, while Ca²⁺, Cu²⁺, and Mn²⁺ inhibited activity by 14.8%, 12.8%, and 10.2% separately. Analysis of hydrolysis products by AnEPG proved that AnEPG belongs to an endo-polygalacturonase. Modelled structure of AnEPG by I-TASSER showed structural characteristics of endo-polygalacturonases. This pectinase has great potential to be used in food industry and as feed additives.

Identification and characterization of thermostable endo-polygalacturonase II B from Aspergillus luchuensis

Endo-polygalacturonase II B (PgaB) from Aspergillus luchuensis was orthologous to endo-polygalacturonase from Aspergillus niger with mutant sites Thr42Ser and Glu52Ala. Mature pgaB gene was cloned from the genomic DNA of A. luchuensis and secreted expressed with over 90% purity in Pichia Pastoris and reached 1.0 g/L after 144 hr culture. The recombinant PgaB was further purified by Ni-NTA chromatography. Using polygalacturonic acid (PGA) as substrate, the optimal condition for PgaB activity was 40°C and pH 4.5, respectively. Km and Vmax of PgaB were 0.19 mmol/l and 103.58 μmol min^-1  mg^-1 , respectively. The relative activity of PgaB remained more than 60% and 40% of maximum activity at 50 and 60°C for 7 hr. PgaB increased the light transmittance by 85% and showed high efficiency in juice clarification. The main product was galacturonic acid oligosaccharides with degrees of polymers (DP) 1-3. The PgaB is a potential pectinolytic enzyme in food industries. PRACTICAL APPLICATIONS: Endo-polygalacturonase II B (PgaB) was identified from Aspergillus luchuensis, a filamentous fungus widely used in food and beverage fermentation in East Asia. PgaB still kept its most activity at 60°C for 7 hr. Polygalacturonic acid (PGA) can be digested effectively by the PgaB and the main products are galacturonic acid oligosaccharides with degrees of polymers (DP) 1-3. PgaB shows high efficiency in juice clarification. The PgaB is a potential pectinolytic enzyme for the applications in food industries.

Enzymatic treatment of flax for use in composites

Enzymes are highly advantageous compared to dew retting to reach fibers of high and consistent quality. However, no unambiguous insights have been retained from the research, i.e. lacking a clear directive of which enzyme activities are strictly needed. Methods for evaluating enzymatic retting should be standardized, with characterization of chemical, morphological and mechanical properties and analysis of the ease of extraction. Moreover, evaluation should not only be focused on the microscopic level of the fiber but the performance of the resulting composite materials should be assessed as well. The review also covers research challenges for introducing enzymatic treatment in large scale production as well as inherent limitations and economic aspects. Besides their high selectivity and environmentally-friendly processing conditions, applying enzymes may also result in a less severe mechanical post-treatment implying less fiber damage. Moreover, recycling of enzymes and utilization of byproducts may increase the economic feasibility of the process.

Immobilization of an alkaline endopolygalacturonase purified from Bacillus paralicheniformis exhibits bioscouring of cotton fabrics

Pectin degrading enzyme has been increasing interest in an industrial application as biocatalysts, such as juice, textile, and wine industry. Bacillus paralicheniformis CBS3, isolated from popular traditional Korean food (kimchi), produced a novel extracellular thermostable alkaline endopolygalacturonase (BPN3). In this study, BPN3 was purified to 22.04-fold with a recovery yield of 18.93% and specific activity of 2216.41 U/mg by gel filtration and anion exchange column chromatography. The molecular mass of BPN3 was approximately 53 kDa as analyzed by SDS-PAGE and pectic zymography. The N-terminal sequence of BPN3 was AIPVILAX. BPN3 was stable over a broad pH range (8.14-11.47), was thermally stable at 50-60 °C, and functioned optimally in pH 9.1 at 60 °C. BPN3 had K_m and V_max values of 0.039 mg/mL and 747.9 ± 1.2 U mg^- 1, respectively, whereas pectin from apple as substrate. BPN3 activity was remarkably affected by metal ions, modulators, and detergents. Digalacturonic acid (GA₂) was the major oligosaccharide produced by hydrolysis of BPN3. Immobilized BPN3 was active over a pH range (8.1-11.5), temperature (50-60)°C, and remained stable with 63.34 and 43.41% of its relative activity during second and third cycle, respectively. Desized cotton exhibited highest reducing sugar liberation through optimized conditions of bioscouring. Bioscouring effectiveness of BPN3 was characterized by the comparison of weight loss for purified BPN3 with commercial pectinase and comparison of BPN3 with grey fabric. BPN3 was simple to purify, had high thermal stability, and was stable over a broad pH range that suggests its suitability for bioscouring application as an industrial catalyst.

Microparticle-enhanced polygalacturonase production by wild type Aspergillus sojae

Polygalacturonases (PGs), an important industrial enzyme group classified under depolymerases, catalyze the hydrolytic cleavage of the polygalacturonic acid chain through the introduction of water across the oxygen bridge. In order to produce and increase the concentration of this enzyme group in fermentation processes, a new approach called microparticle cultivation, a promising and remarkable method, has been used. The aim of this study was to increase the PG activity of Aspergillus sojae using aluminum oxide (Al₂O₃) as microparticles in shake flask fermentation medium. Results indicated that the highest PG activity of 34.55 ± 0.5 U/ml was achieved with the addition of 20 g/L of Al₂O₃ while the lowest activity of 15.20 ± 0.2 U/mL was obtained in the presence of 0.1 g/L of Al₂O₃. In fermentation without microparticles as control, the activity was 15.64 ± 3.3 U/mL. Results showed that the maximum PG activity was 2.2-fold higher than control. Additionally, smaller pellets formed with the addition of Al₂O₃ where the lowest pellet diameter was 955.1 µm when 10 g/L of the microparticle was used. Also, it was noticed that biomass concentration gradually increased with increasing microparticle concentration in the fermentation media. Consequently, the PG activity was significantly increased in microparticle-enhanced shake flask fermentation. In fact, these promising preliminary data can be of significance to improve the enzyme activity in large-scale bioreactors.

Spore Germination of Pathogenic Filamentous Fungi

Fungi, algae, plants, protozoa, and bacteria are all known to form spores, especially hardy and ubiquitous propagation structures that are also often the infectious agents of diseases. Spores can survive for thousands of years, frozen in the permafrost (Kochkina et al., 2012), with the oldest viable spores extracted after 250 million years from salt crystals (Vreeland, Rosenzweig, & Powers, 2000). Their resistance to high levels of UV, desiccation, pressure, heat, and cold enables the survival of spores in the harshest conditions (Setlow, 2016). For example, Bacillus subtilis spores can survive and remain viable after experiencing conditions similar to those on Mars (Horneck et al., 2012). Spores are disseminated through environmental factors. Wind, water, or animal carriage allow spores to be spread ubiquitously throughout the environment. Spores will break dormancy and begin to germinate once exposed to favorable conditions. Germination is the mechanism that converts the spore from a dormant biological organism to one that grows vegetatively and is capable of either sexual or asexual reproduction. The process of germination has been well studied in plants, moss, bacteria, and many fungi (Hohe & Reski, 2005; Huang & Hull, 2017; Vesty et al., 2016). Unfortunately, information on the complex signaling involved in the regulation of germination, particularly in fungi remains lacking. This chapter will discuss germination of fungal spores covering our current understanding of the regulation, signaling, outcomes, and implications of germination of pathogenic fungal spores. Owing to the morphological similarities between the spore-hyphal and yeast-hyphal transition and their relevance for disease progression, relevant aspects of fungal dimorphism will be discussed alongside spore germination in this chapter.

Production, purification and biochemical characterization of an exo-polygalacturonase from Aspergillus niger MTCC 478 suitable for clarification of orange juice

Polygalacturonases (PG) represent an important member of pectinases group of enzymes with immense industrial applications. A fungal strain Aspergillus niger MTCC478 was used for the production of polygalacturonase both under submerged and solid-state fermentation condition. Further its production was optimized under solid-state fermentation condition with media comprising of wheat bran and tea extract. Purification of an exo-PG was achieved by acetone precipitation (60-90%) and CM-cellulose column chromatography revealing 15.28-fold purification with a specific activity of 33.47 U/mg protein and 1.2% yield. A relative molecular mass of purified PG was approximately 124.0 kDa. The pH and temperature optimum was found to be 4 and 50 °C, respectively. The k cat and K m value for degradation of PGA by the purified enzyme was found to be 194 s-1 and 2.3 mg/mL, respectively. Cu2+ was found to enhance the PG activity while Ag+ completely inhibited the enzyme activity. The application of the purified PG in orange juice clarification was elucidated.