Production and purification of laccase by Bacillus sp. using millet husks and its pesticide degradation application

Fabrication, characterization, and application of laccase-immobilized membranes for acetamiprid and diuron degradation

Water and wastewater pollution by acetamiprid and diuron is considered a serious environmental problem. In this study, chitosan (CHS), a naturally occurring bioadsorbent considered ecologically harmless to remove these micropollutants, was developed as a possible carrier to immobilize laccase (Lac) from Trametes trogii. Polyethylene glycol methyl ether (PEGME) was chosen for blending CHS, so a hybrid biocatalyst-based Lac/CHS-PEGME membrane was prepared. The prepared CHS-PEGME and Lac/CHS-PEGME membranes were characterized by Fourier-transformed-infrared (FTIR) spectroscopy, scanning-electron-microscopy (SEM), and X-ray-diffraction (XRD). Pesticide degradation tests with Lac/CHS-PEGME were performed at different contact times and initial concentrations. Acetamiprid degradation was most effective (84 %) at the 12th hour, at an initial concentration of 0.1 mg/L, while diuron degradation was most effective (65 %) at an initial concentration of 6 mg/L and a contact time of 16th hour. Under optimum conditions, the reusability of Lac/CHS-PEGME was found to be 8 cycles for acetamiprid and 5 cycles for diuron. From these results, it is understood that acetamiprid is degraded more quickly and effectively than diuron. Adsorption process data were well fitted to the Langmuir isotherm model and the pseudo-first-order kinetic model. These findings showed that using Lac/CHS-PEGME was a practical and environmentally friendly method for acetamiprid and diuron degradation.

Thermo-Alkali-Tolerant Recombinant Laccase from Bacillus swezeyi and Its Degradation Potential against Zearalenone and Aflatoxin B1

The enzymatic biodegradation of mycotoxins in food and feed has attracted the most interest in recent years. In this paper, the laccase gene from Bacillus swezeyi was cloned and expressed in Escherichia coli BL 21(D3). The sequence analysis indicated that the gene consisted of 1533 bp. The purified B. swezeyi laccase was analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis -12% with an estimated molecular weight of 56.7 kDa. The enzyme is thermo-alkali-tolerant, displaying the optimal degradation of zearalenone (ZEN) and aflatoxin B1 (AFB1) at pH 8 and 9, with incubation temperatures of 55 and 50 °C, respectively, within 24 h. The degradation potentials of the 50 μg of the enzyme against ZEN (5.0 μg/mL) and AFB1 (2.5 μg/mL) were 99.60 and 96.73%, respectively, within 24 h. To the best of our knowledge, this is the first study revealing the recombinant production of laccase from B. swezeyi, its biochemical properties, and potential use in ZEN and AFB1 degradation in vitro and in vivo.

Integrated Electrochemical Oxidation and Biodegradation for Remediation of a Neonicotinoid Insecticide Pollutant

A novel integrated electrochemical oxidation (EO) and bacterial degradation (BD) technique was employed for the remediation of the chloropyridinyl and chlorothiazolyl classes of neonicotinoid (NEO) insecticides in the environment. Imidacloprid (IM), clothianidin (CL), acetamiprid (AC), and thiamethoxam (TH) were chosen as the target NEOs. Pseudomonas oleovorans SA2, identified through 16S rRNA gene analysis, exhibited the potential for BD. In EO, for the selected NEOs, the total percentage of chemical oxygen demand (COD) was noted in a range of 58-69%, respectively. Subsequently, in the biodegradation of EO-treated NEOs (BEO) phase, a higher percentage (80%) of total organic carbon removal was achieved. The optimum concentration of NEOs was found to be 200 ppm (62%) for EO, while for BEO, the COD efficiency was increased up to 79%. Fourier-transform infrared spectroscopy confirms that the heterocyclic group and aromatic ring were degraded in the EO and further utilized by SA2. Gas chromatography-mass spectroscopy indicated up to 96% degradation of IM and other NEOs in BD (BEO) compared to that of EO (73%). New intermediate molecules such as silanediamine, 1,1-dimethyl-n,n'-diphenyl produced during the EO process served as carbon sources for bacterial growth and further mineralized. As a result, BEO enhanced the removal of NEOs with a higher efficiency of COD and a lower consumption of energy. The removal efficiency of the NEOs by the integrated approach was achieved in the order of AC > CL > IM > TH. This synergistic EO and BD approach holds promise for the efficient detoxification of NEOs from polluted environments.

Bacterial chemotaxis of herbicide atrazine provides an insight into the degradation mechanism through intermediates hydroxyatrazine, N-N-isopropylammelide, and cyanuric acid compounds

In recent times, the herbicide atrazine (ATZ) has been commonly used before and after the cultivation of crop plants to manage grassy weeds. Despite its effect, the toxic residues of ATZ affect soil fertility and crop yield. Hence, the current study is focused on providing insight into the degradation mechanism of the herbicide atrazine through bacterial chemotaxis involving intermediates responsive to degradation. A bacterium was isolated from ATZ-contaminated soil and identified as Pseudomonas stutzeri based on its morphology, biochemical and molecular characterization. Upon ultra-performance liquid chromatography analysis, the free cells of isolated bacterium strain was found to utilize 174 μg/L of ATZ after 3-days of incubation on a mineral salt medium containing 200 μg/L of ATZ as a sole carbon source. It was observed that immobilized based degradation of ATZ yielded 198 μg/L and 190 μg/L by the cells entrapped with silica beads and sponge, respectively. Furthermore, the liquid chromatography-mass spectroscopy revealed that the secretion of three significant metabolites, namely, cyanuric acid, hydroxyatrazine and N- N-Isopropylammelide is responsive to the biodegradation of ATZ by the bacterium. Collectively, this research demonstrated that bacterium strains are the most potent agent for removing toxic pollutants from the environment, thereby enhancing crop yield and soil fertility with long-term environmental benefits.

Esterase and ALDH dehydrogenase-based pesticide degradation by Bacillus brevis 1B from a contaminated environment

The isolated bacterial strain (Bacillus brevis strain 1 B) showed a maximum tolerated level of 450 mg L^-1 of the selected pesticides namely: imidacloprid, fipronil, cypermethrin, and sulfosulfuron. Within 15 days of the experiment, strain 1 B was able to reduce up to 95% of a pesticide mixture (20 mg L^-1) in a carbon-deficient medium (minimal medium). The optimal conditions obtained using Response Surface Methodology (RSM) were: inoculums; 2.0 × 10⁷ CFU mL^-1, shaking speed; 120 rpm, and pesticide concentration; 80 mg L^-1. After 15 days of soil-based bioremediation using strain 1 B, the degradation pattern for imidacloprid, fipronil, cypermethrin, sulfosulfuron, and control was 99, 98.5, 94, 91.67, and 7%, respectively. Gas chromatography-mass spectrometry (GC-MS) analysis was used to determine the intermediate metabolites of cypermethrin with bacterial 1 B as 2-cyclopenten-1-one, 2-methylpyrrolidine, 2-oxonanone, 2-pentenoic acid, 2-penten-1-ol, hexadecanoic acid or palmitic acid, pentadecanoic acid, 3-cyclopentylpropionic acid, and 2-dimethyl. Furthermore, genes encoding aldehyde dehydrogenase (ALDH) and esterase were expressed under stress conditions and connected to pesticide bioremediation. Hence the efficacy of Bacillus brevis (1 B) could be employed for the bioremediation of pesticide mixtures and other toxic substances (dye, polyaromatic hydrocarbon, etc.) from contaminated sites.

Laccase production from Bacillus aestuarii KSK using Borassus flabellifer empty fruit bunch waste as a substrate and assessing their malachite green dye degradation

AIMS

The lignocellulosic waste, Borassus flabellifer empty fruit bunch waste (BFEFBW), was employed to produce laccase using Bacillus aestuarii KSK under solid-state fermentation (SSF) conditions and to assess the efficiency of malachite green (MG) dye decolourization.

METHODS AND RESULTS

Abiotic factors such as pH (5.0-9.0), temperature (25-45°C) and incubation time (24-96 h) were optimized using Response surface methodology-Box-Behenan Design (RSM-BBD) to exploit the laccase production. The anticipated model revealed that the highest laccase activity of 437 U/ml shows after 60 h of incubation at 35°C at pH 7.0. The bacterial laccase was used to remove 89% of the MG dye in less time.

CONCLUSION

The laccase from B. aestuarii KSK decolorizes the MG and thereby making it a suitable choice for wastewater treatment from industrial effluents.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study is the first report on the production of laccase from B. flabellifer empty fruit bunch waste as a substrate. Bacillus aestuarii KSK was isolated from the soil sample and used to produce laccase under SSF conditions. The bacterial laccase has the potential for industrial application in textile waste dye treatment.

Effect of household culinary processes on organochlorine pesticide residues (OCPs) in the seafood (Penaeus vannamei) and its associated human health risk assessment: Our vision and future scope

Food safety is crucial in today's competitive trading market, as it directly affects human health and promotes seafood exports. The effects of thermal processing (boiling, frying, grilling, and microwave cooking) on pesticide residues (PR) in P. vannamei were assessed. The PR in raw and processed shrimp ranged from 0.007 to 0.703 μg/kg for uncooked/raw, not detected (ND) to 0.917 μg/kg for boiled, ND to 0.506 μg/kg for fried, ND to 0.573 μg/kg for grilled and ND to 0.514 μg/kg for microwave cooked shrimps. The Endrin, endosulfan sulfate, and heptachlor were predominant PR found in the raw and processed shrimp. The PR content in raw and cooked shrimps were below the maximum residue limits (MRL) set by the Codex Alimentarius Commission (2021) and the European Commission (86/363/1986 and 57/2007). The estimated daily intake (EDI) of PR from raw and processed shrimps were below the ADI prescribed by CAC. The hazard quotient (HQ) and hazard ratio (HR) values were <1, indicating no non-carcinogenic or carcinogenic health implications through shrimp consumption. The estimated maximum allowable shrimp consumption rate (CRlim) suggests an adult can eat >100 shrimp meals/month, which is over the USEPA's (2000)recommendation of >16 meals/month without health issues. The Effect of thermal processing was detected in the following order: boiling < grilling < frying < microwave cooking. The processing factor (PF < 0.7), paired t-test (t < 0.05), Tukey post hoc (p < 0.05) test, Bray-Curtis similarity index, and matrix plot exhibited that all the four thermal processing methods have a considerable impact on pesticides in the processed shrimps. But frying (59.4%) and microwave cooking (60.3%) reduced PR far beyond boiling (48.8%) and grilling (51.3%). Hence, we recommend frying and microwave processing are better methods for minimizing PR in seafood than boiling or grilling.

Novel mechanism and degradation kinetics of pesticides mixture using Bacillus sp. strain 3C in contaminated sites

The present study has investigated the potential of Bacillus sp. strain 3C able to degrade mixture of pesticides from the environment. It showed maximum tolerance up to 450 mg·L^-1 for cypermethrin, fipronil, imidacloprid and sulfosulfuron. The strain 3C was able to degrade up to the 94% of mixture of pesticides (20 mg·L^-1) within 15 days of experiment. The Box-Behnken design of Response Surface Methodology (RSM) determined the optimized conditions as; inoculum size 3.0 × 10⁷ CFU·mL^-1, shaking speed 120 rpm, and pesticides concentration 80 mg·L^-1. In soil-based bioremediation with strain 3C after 15 days degradation pattern was; 99, 94, 92, 92 and 7% for the imidacloprid, sulfosulfuron, fipronil, cypermethrin and control respectively. The novel intermediate metabolites for cypermethrin degradation were investigated as decyl isobutyl ester, phthalic acid, cyclopropane carboxylic acid tri dec-2-ynyl ester, 9- octadecanal, tridecane, propanoic acid, cyclohexene, bicyclo[2.2.1] heptan-2-ol, and acetic acid were identified using Gas chromatography Mass Spectrometry (GC-MS) with strain 3C. Moreover, the results of the laccase based enzymatic kinetics suggested that the rate of production was maximum in pesticides stress (94 μg·μL^-1) whereas, in normal condition 51 μg·μL^-1. The K_m value found to be decreased in pesticides stress condition 12.25 and increment in K_m 13.58 mM was observed without stress. Furthermore, aldehyde dehydrogenase (ALDH) and laccase encoding genes were amplified and linked with mixture of pesticides bioremediation. The efficiency of bacterial strain 3C, could be used for bioremediation of mixture of pesticides, and other xenobiotic compounds from the contaminated environments.

The production of laccases by white-rot fungi under solid-state fermentation conditions

Laccases (E.C. 1.10.3.2) produced by white-rot fungi (WRF) can be widely used, but the high cost prevents their use in large-scale industrial processes. Finding a solution to the problem could involve laccase production by solid-state fermentation (SSF) simulating the natural growth conditions for WRF. SSF offers several advantages over conventional submerged fermentation (SmF), such as higher efficiency and productivity of the process and pollution reduction. The aim of this review is therefore to provide an overview of the current state of knowledge about the laccase production by WRF under SSF conditions. The focus is on variations in the up-stream process, fermentation and down-stream process and their impact on laccase activity. The variations of up-stream processing involve inoculum preparation, inoculation of the medium and formulation of the propagation and production media. According to the studies, the production process can be shortened to 5-7 days by the selection of a suitable combination of lignocellulosic material and laccase producer without the need for any additional components of the culture medium. Efficient laccase production was achieved by valorisation of wastes as agro-food, municipal wastes or waste generated from wood processing industries. This leads to a reduction of costs and an increase in competitiveness compared to other commonly used methods and/or procedures. There will be significant challenges and opportunities in the future, where SSF could become more efficient and bring the enzyme production to a higher level, especially in new biorefineries, bioreactors and biomolecular/genetic engineering.

Insights on sustainable approaches for production and applications of value added products

The increasing demand for the development of sustainable strategies to utilize and process agro-industrial residues paves new paths for exploring innovative approaches in this area. Biotechnology based microbial transformations provide efficient, low cost and sustainable approaches for the production of value added products. The use of organic rich residues opens new avenues for the production of enzymes, pigments, biofuels, bioactive compounds, biopolymers etc. with vast industrial and therapeutic applications. Innovative technologies like strain improvement, enzyme immobilization, genome editing, morphological engineering, ultrasound/supercritical fluid/pulse electric field extraction, etc. can be employed. These will be helpful in achieving significant improvement in qualitative and quantitative parameters of the finished products. The global trend for the valorisation of biowaste has boosted the commercialization of these products which has transformed the markets by providing new investment opportunities. The upstream processing of raw materials using microbes poses a limitation in terms of product development and recovery which can be overcome by modifying the bioreactor design, physiological parameters or employing alternate technologies which will be discussed in this review. The other problems related to the processes include product stability, industrial applicability and cost competitiveness which needs to be addressed. This review comprehensively discusses the recent progress, avenues and challenges in the approaches aimed at valorisation of agro-industrial wastes along with possible opportunities in the bioeconomy.

Mitigation of organophosphorus insecticides from environment: Residual detoxification by bioweapon catalytic scavengers

Organophosphorus insecticides (OPIs) have low persistence and are easily biodegradable in nature. The United States and India are the major countries producing OPIs of about 25% and 17% of the world, respectively. OPIs commonly used for agricultural practices occupy a major share in the global market, which leads to the increasing contamination of OPIs residues in various food chains. To overcome this issue, an enzymatic degradation method has been approved by several environmental toxic, and controlling agencies, including United States Environmental Protection Agency (USEPA). Different catalytic enzymes have been isolated and identified from various microbial sources to neutralize the toxic pesticides and/or insecticides. In this review, we have gathered information on OPIs biotransformation and their residual toxicity in the environment. Particularly, it focuses on OPIs degrading enzymes such as chlorpyrifos hydrolase, diisopropylfluorophosphatase, organophosphate acid anhydrolase, organophosphate hydrolases, and phosphotriesterases like lactonasesspecific activity either P-O link group type or P-S link group of pesticides. To summarize, the catalytic degradation of organophosphorus insecticides is not only profitable but also environmentally friendly. Hence, the enzymatic catalyst is an ultimate and super bio-weapon to mitigate or decontaminate various OPIs residues in both terrestrial and aqueous environments.

Cost-effective production of biocatalysts using inexpensive plant biomass: a review

Enzymes are the complex protein moieties, catalyze the rate of chemical reactions by transforming various substrates to specific products and play an integral part in multiple biochemical cycles. Advancement in enzyme research and its integration with industries have reformed the biotech industries. It provides a superior monetary and ecological exchange to traditional material measures in an efficient and environmentally sustainable manner. The cost-effective production of pure and highly active enzymes is still a challenge for the biocatalyst industries. The use of high purity substrates further raises the cost of a typical biocatalyst. The use of low-cost plant-based biomasses as an enticing and sustainable substrate for enzyme production is the most cost-effective approach to these problems. Given the relevance of biomass as a substrate for enzyme development, this review article focuses on the key source, composition and major enzyme generated using various biomass residues. Furthermore, the difficulties associated with the use of biomass as a substrate and technical developments in this area, are also addressed. The use of waste biomass as a substrate lowers the ultimate cost for the production of biocatalysts while simultaneously reduces the waste burden from the environment.

Enzymatic treatment of phenolic pollutants by a small laccase immobilized on APTES-functionalised magnetic nanoparticles

In this study, we have successfully synthesized magnetic nanoparticles (MNPs), functionalised them by silanization and used them for the covalent immobilization of a recombinant small laccase (rSLAC) from Streptomyces coelicolor. The immobilized recombinant laccase (MNP-rSLAC) was subsequently used for the treatment of phenol, 4-chlorophenol (4-CP) and 4-fluorophenol (4-FP). The enzyme completely degraded 80 µg/mL of the selected phenolic compounds within 2 h in the presence of a natural mediator, acetosyringone. The MNP-rSLAC retained > 73% of initial activity (2,6-dimethoxyphenol as substrate) after 10 catalytic cycles and could be easily recovered from the reaction mixture by the application of magnetic field. Furthermore, immobilised rSLAC exhibited better storage stability than its free counterpart. The Michaelis constant (K_m) value for the immobilised rSLAC was higher than free rSLAC, however the maximum velocity (V_max) of the immobilised SLAC was similar to that of the free rSLAC. Growth inhibition studies using Escherichia coli showed that rSLAC-mediated treatment of phenolic compounds reduced the toxicity of phenol, 4-CP and 4-FP by 90, 60 and 55%, respectively. Interestingly, the presence of selected metal ions (Co²⁺, Cu²⁺, Mn²⁺) greatly enhanced the catalytic activity of rSLAC and MNP-rSLAC. This study indicates that immobilized small laccase (MNP-rSLAC) has potential for treating wastewater contaminated with phenolic compounds.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02854-0.

Chlorpyrifos degradation efficiency of Bacillus sp. laccase immobilized on iron magnetic nanoparticles

The present study explored the immobilization of laccase onto iron magnetic nanoparticles (MNPs) to enhance its enzymatic properties and applications. The immobilization process was optimized using Box-Behnken design (BBD). BBD showed significance towards the quadratic model with experimental data. Maximum laccase activity recovery (99%) of the predicted model was observed at 0.75 mg/mL of laccase concentration, 200 mg/mL of MNPs, 0.3% cross linking with carbodiimide, and 3 h of cross-linking time. The magnetization activity of MNPs (8 emu/g) and the immobilized laccase with MNPs (4 emu/g) was analyzed using vibrating sample magnetometer (VSM). Maximum activity of immobilized laccase was observed at pH 7.0 and 55 °C. The immobilized laccase has greater stability (100 h) and significant chlorpyrifos (pesticide) degradation activity. High-performance liquid chromatography (HPLC) results confirmed the degraded metabolic products of chlorpyrifos. In all, the immobilized laccase was superior to free laccase, showing promising structural and application characteristics.