Biodegradation of NSAIDs and their effect on the activity of ligninolytic enzymes from Pleurotus djamor

Non-steroidal anti-inflammatory drugs (NSAIDs) in the environment: Recent updates on the occurrence, fate, hazards and removal technologies

Non-steroidal Anti-inflammatory Drugs (NSAIDs) are extensively utilized pharmaceuticals worldwide. However, owing to the improper discharge and disposal practices, they have emerged as significant contaminants that are widely distributed in water, soils, and sewage sediments. This ubiquity poses a substantial threat to the ecosystem and human health. Consequently, it is imperative to develop rapid, cost-effective, efficient and reliable approaches for containing these substance in order to mitigate the deleterious impact of NSAIDs. This research provides a comprehensive review of the occurrence, fate, and hazards associated with NSAIDs in the general environment. Additionally, various removal technologies, including advanced oxidation processes, biodegradation, and adsorption, were systematically summarized. The study also presents a comparative analysis of the benefits and drawbacks of different removal technologies while interpreting challenges related to NSAIDs' removal and proposing strategies for future development.

Biodegradation of agave Comiteco bagasse by Pleurotus spp.: a source of cellulases useful in hydrolytic treatment to produce reducing sugars

This study aimed to determine the production parameters of five strains of Pleurotus spp. during their cultivation on agave Comiteco bagasse, as well as the feasibility of using cellulolytic extracts to produce reducing sugars in the same bagasse. After cultivation, the basidiome production parameters varied between 41.2 and 65.7% (biological efficiency), 0.17 and 0.30 (yield), 0.60 and 0.90% (production rate), 16.4 and 41.1% (Bioconversion) and 9.4 and 21.3 g (mean mushroom weight). At day 15 of growth, P. djamor showed the highest β-glucosidase activity (43.95 ± 4.5 IU/g); on day 33. The same strain had the highest endoglucanase activity (21.12 ± 0.5 IU/ml). Both extracts were partially purified, and the kinetic parameters Vmax and Km were estimated (20.83 µmole/ml sec and 232.01 µmole/ml for β-glucosidase and 685.01 µmole/ml sec and 1,240.34 µmole/ml for endoglucanase). In the enzymatic hydrolysis assay, the highest concentration of reducing sugars (43.13 ± 1.09 g/L; 0.21 g/g bagasse) was obtained by a mixture of the two partially purified extracts acting synergistically after 48 h and with a pH adjustment. The results suggest that the use of agave Comiteco bagasse for cultivating edible mushrooms while obtaining cellulolytic extracts is an alternative treatment for waste reduction and valorization of agro-industrial by-products.

Sodium-alginate-laden MXene and MOF systems and their composite hydrogel beads for batch and fixed-bed adsorption of naproxen with electrochemical regeneration

Sodium alginate (SA)-laden two-dimensional (2D) Ti3C2Tx MXene (MX) and MIL-101(Fe) (a type of metal-organic framework (MOF)) composites were prepared and used for the removal of naproxen (NPX), following the adsorption and electrochemical regeneration processes. The fixed-bed adsorption column studies were also conducted to study the process of removal of NPX by hydrogels. The number of interactions via which the MX-embedded SA (MX@SA) could adsorb NPX was higher than the number of pathways associated with NPX adsorption on the MIL-101(Fe)-embedded SA (MIL-101(Fe)@SA), and the MX and MIL-101(Fe) composite embedded SA (MX/MIL-101(Fe)@SA). The optimum parameters for the electrochemical regeneration process were determined: charge passed and current density values were 169.3 C g-1 and 10 mA cm-2, respectively, for MX@SA, and the charge passed and current density values were 16.7 C g-1 and 5 mA cm-2, respectively, for both MIL-101(Fe)@SA and MX/MIL-101(Fe)@SA. These parameters enabled excellent regeneration, consistent over multiple adsorption and electrochemical regeneration cycles. The mechanism for the regeneration of the materials was proposed that the regeneration of MX@SA and MIL-101(Fe)@SA involved the indirect electrooxidation process in the presence of OH radicals, and the regeneration of MX/MIL-101(Fe)@SA involved the indirect oxidation process in the presence of active chlorine species.

Ketoprofen as an emerging contaminant: occurrence, ecotoxicity and (bio)removal

Ketoprofen, a bicyclic non-steroidal anti-inflammatory drug commonly used in human and veterinary medicine, has recently been cited as an environmental contaminant that raises concerns for ecological well-being. It poses a growing threat due to its racemic mixture, enantiomers, and transformation products, which have ecotoxicological effects on various organisms, including invertebrates, vertebrates, plants, and microorganisms. Furthermore, ketoprofen is bioaccumulated and biomagnified throughout the food chain, threatening the ecosystem function. Surprisingly, despite these concerns, ketoprofen is not currently considered a priority substance. While targeted eco-pharmacovigilance for ketoprofen has been proposed, data on ketoprofen as a pharmaceutical contaminant are limited and incomplete. This review aims to provide a comprehensive summary of the most recent findings (from 2017 to March 2023) regarding the global distribution of ketoprofen in the environment, its ecotoxicity towards aquatic animals and plants, and available removal methods. Special emphasis is placed on understanding how ketoprofen affects microorganisms that play a pivotal role in Earth's ecosystems. The review broadly covers various approaches to ketoprofen biodegradation, including whole-cell fungal and bacterial systems as well as enzyme biocatalysts. Additionally, it explores the potential of adsorption by algae and phytoremediation for removing ketoprofen. This review will be of interest to a wide range of readers, including ecologists, microbiologists, policymakers, and those concerned about pharmaceutical pollution.

Structural insights, biocatalytic characteristics, and application prospects of lignin-modifying enzymes for sustainable biotechnology-A review

Lignin modifying enzymes (LMEs) have gained widespread recognition in depolymerization of lignin polymers by oxidative cleavage. LMEs are a robust class of biocatalysts that include lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP), laccase (LAC), and dye-decolorizing peroxidase (DyP). Members of the LMEs family act on phenolic, non-phenolic substrates and have been widely researched for valorization of lignin, oxidative cleavage of xenobiotics and phenolics. LMEs implementation in the biotechnological and industrial sectors has sparked significant attention, although its potential future applications remain underexploited. To understand the mechanism of LMEs in sustainable pollution mitigation, several studies have been undertaken to assess the feasibility of LMEs in correlating to diverse pollutants for binding and intermolecular interactions at the molecular level. However, further investigation is required to fully comprehend the underlying mechanism. In this review we presented the key structural and functional features of LMEs, including the computational aspects, as well as the advanced applications in biotechnology and industrial research. Furthermore, concluding remarks and a look ahead, the use of LMEs coupled with computational frameworks, built upon artificial intelligence (AI) and machine learning (ML), has been emphasized as a recent milestone in environmental research.

Assessing three industrially produced fungi for the bioremediation of diclofenac

Diclofenac is an emerging pollutant: toxic, persistent, and bioaccumulative, present in several environmental niches in a concentration of parts per million. This pharmaceutical's biological removal was reported with various fungal species, showing promissory results. This work aimed at diclofenac removal by individually challenging the fungal species Pleurotus ostreatus, Aspergillus niger, and Penicillium roquefortii but triying to lower the biosorption nature of cell walls by NaCl addition. P. ostreatus removed 100% of the initial diclofenac concentration, whereas A. niger and P. roqueforti removed 74% and 32%, respectively. In all three cases, biosorption by polar interactions was negligible. We demonstrated that stressful environments, such as mineral media, force the fungus to take advantage of its metabolic tools to survive, hence showing higher removal capacity when limiting growth conditions. Bioremediation is an excellent alternative to give residual fungal biomass a secondary use.

Production, partial purification and characterization of ligninolytic enzymes from selected basidiomycetes mushroom fungi

In recent years, many research on the quantity of lignocellulosic waste have been developed. The production, partial purification, and characterisation of ligninolytic enzymes from various fungi are described in this work. On the 21st day of incubation in Potato Dextrose (PD) broth, Hypsizygus ulmarius developed the most laccase (14.83 × 10⁻⁶ IU/ml) and manganese peroxidase (24.11 × 10⁻⁶ IU/ml), while Pleurotus florida produced the most lignin peroxidase (19.56 × ⁻⁶ IU/ml). Laccase (Lac), lignin peroxidase (LiP), and manganese peroxidase (MnP), all generated by selected basidiomycetes mushroom fungi, were largely isolated using ammonium sulphate precipitation followed by dialysis. Laccase, lignin peroxidase, and manganese peroxidase purification findings indicated 1.83, 2.13, and 1.77 fold purity enhancements, respectively. Specific activity of purified laccase enzyme preparations ranged from 305.80 to 376.85 IU/mg, purified lignin peroxidase from 258.51 to 336.95 IU/mg, and purified manganese peroxidase from 253.45 to 529.34 IU/mg. H. ulmarius laccase (376.85 IU/mg) with 1.83 fold purification had the highest specific activity of all the ligninolytic enzymes studied, followed by 2.13 fold purification in lignin peroxidase (350.57 IU/mg) and manganese peroxidase (529.34 IU/mg) with 1.77-fold purification. Three notable bands with molecular weights ranging from 43 to 68 kDa and a single prominent band with a molecular weight of 97.4 kDa were identified on a Native PAGE gel from mycelial proteins of selected mushroom fungus. The SDS PAGE profiles of the mycelial proteins from the selected mushroom fungus were similar to the native PAGE. All three partially purified ligninolytic isozymes display three bands in native gel electrophoresis, with only one prominent band in enzyme activity staining. The 43 kDa, 55 kDa, and 68 kDa protein bands correspond to laccase, lignin peroxidase, and manganese peroxidase, respectively.

Efficient biodegradation of Congo red dye using fungal consortium incorporated with Penicillium oxalicum and Aspergillus tubingensis

A novel approach had been carried out to develop fungal consortium, namely, RH-2, containing two marine procured fungal isolates in order to evaluate biodegradation of recalcitrant diazo dye Congo red. The fungi were isolated from the seacoast of Diu, India. According to the ITS sequencing, the strains were identified as Penicillium oxalicum (DS-2) and Aspergillus tubingensis (DS-4). Discs of 12 mm were cut out from the edge of both the fungal isolates (DS-2 and DS-4) and inoculated in flasks consisting of potato dextrose broth with 100 mg/L Congo red for the development of fungal consortium RH-2. The degradation by the fungal consortium RH-2 was more effective than the fungal monocultures DS-2 and DS-4 with the respective degradation reaching 97.15 ± 0.15%, 68.96 ± 0.09%, and 29.96 ± 0.21% in addition of yeast extract (1% w/v) within 12 h. The influence of dextrose (1% w/v), yeast extract (1% w/v), pH 5, and salt concentration (1% w/v) enhanced the degradation potential of fungal consortium RH-2. The maximal degradation was correlated with the production of laccase (12.498 ± 0.21 U/mL) and manganese peroxidase (10.314 ± 0.25 U/mL). The catabolism of Congo red was confirmed by UV-Visible spectroscopic analysis (Congo red λ-max = 499 nm) and ATR-FTIR spectroscopic analysis. The filtrates obtained after Congo red degradation were also evaluated for microbial toxicity against bacteria (Bacillus haynesii) and phytotoxicity analysis on plant seed (Trigonella foenum) which revealed that the filtrate acquired after the treatment of Congo red by fungal consortium RH-2 was less toxic than the original dye in nature. A novel aspect is determined by the evidence of mutualistic interaction between two different fungi for the rapid decolorization and degradation of dye providing a prospective of utilizing the developed consortium RH-2 as a cost-effective approach in textile wastewater treatment for cleaner environment.

Removal of diclofenac by a local bacterial consortium: UHPLC-ESI-MS/MS analysis of metabolites and ecotoxicity assessment

Diclofenac (DCF) belongs to the class of nonsteroidal anti-inflammatory drugs, which is one of the most consumed by population and detected in raw sewage. Several studies have reported variable removal rates by biodegradation of diclofenac in wastewater treatment plants (WWTPs). This study deals with the evaluation of the biodegradation of DCF by a bacterial consortium (obtained from pure cultures of Enterobacter hormaechei D15 and Enterobacter cloacea D16), which were isolated from household compost and Algerian WWTP, respectively, as sole carbon source and by co-metabolism, using glucose as carbon source. A 98% removal rate of DCF was observed when it is used as the sole carbon source, whilst only 44% of DCF was removed in co-metabolic conditions. Two metabolites were identified using ultra-high-performance liquid chromatography coupled to electrospray injection tandem mass spectrometry analysis (UHPLC-ESI-MS/MS); one of them was identified as 4'-hydroxy-DCF, and the second metabolite was suspected to be a nitro derivative of DCF, according to comparison with the literature. Biodegradation of DCF by this bacterial consortium generates relatively safe final by-products.

Novel cobiomass degradation of NSAIDs by two wood rot fungi, Ganoderma applanatum and Laetiporus sulphureus: Ligninolytic enzymes induction, isotherm and kinetic studies

A novel study on biodegradation of 30 mg L^-1 of Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) mixture (celecoxib, diclofenac and ibuprofen) by two wood-rot fungi; Ganoderma applanatum (GA) and Laetiporus sulphureus (LS) was investigated for 72 h. The removal efficiency of celecoxib, diclofenac and ibuprofen were 98, 96 and 95% by the fungal consortium (GA + LS). Although, both GA and LS exhibited low removal efficiency (61 and 73% respectively) on NSAIDs. However, 99.5% degradation of the drug mixture (NSAIDs) was achieved on the addition of the fungal consortium (GA + LS) to the experimental set-up. Overall, LS exhibited higher degradation efficiency; 92, 87, 79% on celecoxib, diclofenac and ibuprofen than GA with 89, 80 and 66% respectively. Enzyme analyses revealed significant induction of 201, 180 and 135% in laccase (Lac), lignin peroxidase (LiP) and manganese peroxidase (MnP) by the fungal consortium during degradation of the NSAIDs respectively. The experimental data showed the best goodness of fit when subjected to Langmuir (R² = 0.980) and Temkin (R² = 0.979) isotherm models which suggests monolayer and heterogeneous nature exhibited by the mycelia during interactions with NSAIDs. The degradation mechanism followed pseudo-second-order kinetic model (R² = 0.987) indicating the strong influence of fungal biomass in the degradation of NSAIDs. Furthermore, Gas Chromatography-Mass Spectrometry (GCMS) and High-Performance Liquid Chromatography (HPLC) analyses confirmed the degraded metabolic states of the NSAIDs after treatment with GA, LS and consortium (GA + LS). Hence, the complete removal of NSAIDs is best achieved in an economical and eco-friendly way with the use of fungi consortium.

Biotransformation of lignocellulosic biomass into industrially relevant products with the aid of fungi-derived lignocellulolytic enzymes

Lignocellulosic material has drawn significant attention among the scientific community due to its year-round availability as a renewable resource for industrial consumption. Being an economic substrate alternative, various industries are reevaluating processes to incorporate derived compounds from these materials. Varieties of fungi and bacteria have the ability to depolymerize lignocellulosic biomass by synthesizing degrading enzymes. Owing to catalytic activity stability and high yields of conversion, lignocellulolytic enzymes derived from fungi currently have a high spectrum of industrial applications. Moreover, these materials are cost effective, eco-friendly and nontoxic while having a low energy input. Techno-economic analysis for current enzyme production technologies indicates that synthetic production is not commercially viable. Instead, the economic projection of the use of naturally-produced ligninolytic enzymes is promising. This approach may improve the economic feasibility of the process by lowering substrate expenses and increasing lignocellulosic by-product's added value. The present review will discuss the classification and enzymatic degradation pathways of lignocellulolytic biomass as well as the potential and current industrial applications of the involved fungal enzymes.