Carbon aerogels based on regenerated silk proteins and graphene oxide for supercapacitors

Nanocellulose-graphene composites: Preparation and applications in flexible electronics

In recent years, the pursuit of high-performance nano-flexible electronic composites has led researchers to focus on nanocellulose-graphene composites. Nanocellulose has garnered widespread interest due to its exceptional properties and unique structure, such as renewability, biodegradability, and biocompatibility. However, nanocellulose materials are deficient in electrical conductivity, which limits their applications in flexible electronics. On the other hand, graphene boasts remarkable properties, including a high specific surface area, robust mechanical strength, and high electrical conductivity, making it a promising carbon-based nanomaterial. Consequently, research efforts have intensified in exploring the preparation of graphene-nanocellulose flexible electronic composites. Although there have been studies on the application of nanocellulose and graphene, there is still a lack of comprehensive information on the application of nanocellulose/graphene in flexible electronic composites. This review examines the recent developments in nanocellulose/graphene flexible electronic composites and their applications. In this review, the preparation of nanocellulose/graphene flexible electronic composites from three aspects: composite films, aerogels, and hydrogels are first introduced. Next, the recent applications of nanocellulose/graphene flexible electronic composites were summarized including sensors, supercapacitors, and electromagnetic shielding. Finally, the challenges and future directions in this emerging field was discussed.

SuFEx modification of silk fibroin silicon aerogel and its adsorption behavior and antibacterial performance

A silk fibroin silicon-based composite aerogel (SSA) has been modified via a SuFEx reaction for application in the adsorption of anionic pollutants and antimicrobials in water. The tyrosine fragment in the silk fibroin was modified by a high yielding SuFEx click reaction. A quaternary ammonium salt functionality was introduced into the silk fibroin protein and the modified silk fibroin protein was crosslinked with tetraethyl orthosilicate. The aerogel was then prepared by freeze-drying. The aerogel obtained has biocompatibility and biodegradability properties. Four types of dyes (Methyl orange, Rhodamine B, Methylene blue and Acid red) were applied as targets and the saturated adsorption amounts were calculated. The adsorption behavior of the dyes towards SSA was studied by fitting Langmuir and Freundlich adsorption models. A pseudo-first order kinetic model and a pseudo-second order kinetic model were used to study the kinetics of the adsorption process. After 6 cycles, the removal rate of methyl orange by SSA remained at 81.25%. The adsorption capacity and anti-interference ability of SSA on some other polluting anions such as PO₄^3- and CrO₄^2- were also measured and the efficiency adsorption reached up to 70.94% and 77.91%, respectively. The antibacterial effect of SSA was evaluated with Escherichia coli and Staphylococcus aureus as representative examples.

Natural Silk Nanofibril Aerogels with Distinctive Filtration Capacity and Heat-Retention Performance

Nanofibrous aerogels have been extensively developed as multifunctional substrates in a wide range of fields. Natural silk nanofibrils (SNFs) are an appealing biopolymer due to their natural abundance, mechanical toughness, biodegradability, and excellent biocompatibility. However, fabricating 3D SNF materials with mechanical flexibility remains a challenge. Herein, SNF-based aerogels with controlled structures and well mechanical resilience were prepared. SNFs were extracted from silkworm silks by mechanical disintegration based on an all-aqueous system. The nanofibrils network and hierarchical cellular structure of the aerogels were tuned by the assembly of SNFs and foreign poly(vinyl alcohol) (PVA). The SNF aerogels exhibited an ultralow density (as low as 2.0 mg·cm^-3) and well mechanical properties with a structure allowing for large deformations. These SNF aerogels demonstrated a reversible compression and stress retention after 100 cycles of compression. Furthermore, the resulting aerogels were used for air filtration and showed efficient filtration performance with a high dust-holding capacity and low resistance. Moreover, an extremely low thermal conductivity of 0.028 W·(m·K)^-1 was achieved by the aerogel, showing its potential for use in heat-retention applications. This study provides a useful strategy for exploring the use of natural silks in 3D aerogels and offers options for developing filtration materials and ultralight heat-retention materials.

High-performance nanostructured bio-based carbon electrodes for energy storage applications

Polyacrylonitrile (PAN)-based carbon precursor is a well-established and researched material for electrodes in energy storage applications due to its good physical properties and excellent electrochemical performance. However, in the fight of preserving the environment and pioneering renewable energy sources, environmentally sustainable carbon precursors with superior electrochemical performance are needed. Therefore, bio-based materials are excellent candidates to replace PAN as a carbon precursor. Depending on the design requirement (e.g. carbon morphology, doping level, specific surface area, pore size and volume, and electrochemical performance), the appropriate selection of carbon precursors can be made from a variety of biomass and biowaste materials. This review provides a summary and discussion on the preparation and characterization of the emerging and recent bio-based carbon precursors that can be used as electrodes in energy storage applications. The review is outlined based on the morphology of nanostructures and the precursor's type. Furthermore, the review discusses and summarizes the excellent electrochemical performance of these recent carbon precursors in storage energy applications. Finally, a summary and outlook are also given. All this together portrays the promising role of bio-based carbon electrodes in energy storage applications.

The State of the Art of Energy Harvesting and Storage in Silk Fibroin-Based Wearable and Implantable Devices

The energy autonomy of self-powered wearable electronics depends on the adequate development of new technologies for energy harvesting and energy storage devices based on textile fibers to facilitate the integration with truly flexible and wearable devices. Silk fiber-based systems are attractive for the design of biomedical devices, lithium-ion batteries and flexible supercapacitors, due to their nitrogen-rich structure (for preparation of hierarchical carbon-based structures), and available surface for chemical modification reinforcing electroactive properties for use in batteries and supercapacitors. Herein, this paper reviews recent advances on silk fiber-based systems for harvesting and the storage of energy and the corresponding strategies to reinforce the physical and chemical properties of the resulting composites applied as electrodes and battery separators.

Tough Photocrosslinked Silk Fibroin/Graphene Oxide Nanocomposite Hydrogels

The development of protein-based hydrogels for tissue engineering applications is often limited by their mechanical properties. Herein, we present the facile fabrication of tough regenerated silk fibroin (RSF)/graphene oxide (GO) nanocomposite hydrogels by a photochemical cross-linking method. The RSF/GO composite hydrogels demonstrated soft and adhesive properties during initial stages of photocrosslinking (<2 min), which is not observed for the pristine RSF hydrogel, and rendered a tough and nonadhesive hydrogel upon complete cross-linking (10 min). The composite hydrogels exhibited superior tensile mechanical properties, increased β-sheet content, and decreased chain mobility compared to that of the pristine RSF hydrogels. The composite hydrogels demonstrated Young's modulus as high as ∼8 MPa, which is significantly higher than native cartilage (∼1.5 MPa), and tensile toughness as high as ∼2.4 MJ/m³, which is greater than that of electroactive polymer muscles and at par with RSF/GO composite membranes fabricated by layer-by-layer assembly. Small-angle scattering study reveals the hierarchical structure of photocrosslinked RSF hydrogels to comprise randomly distributed water-poor (hydrophobic) and water-rich (hydrophilic) regions at the nanoscale, whereas water pores and channels exhibiting fractal-like characteristics at the microscale. The size of hydrophobic domain (containing β-sheets) was observed to increase slightly with GO incorporation and/or alcohol post-treatment, whereas the size of the hydrophilic domain (intersheet distance containing random coils) was observed to increase significantly, which influences/affects water uptake capacity, cross-link density, and mechanical properties of hydrogels. The presented results have implications for both fundamental understanding of the structure-property relationship of RSF-based hydrogels and their technological applications.

Fabrication of Flexible, Fully Organic, Degradable Energy Storage Devices Using Silk Proteins

Flexible and thin-film devices are of great interest in epidermal and implantable bioelectronics. The integration of energy storage and delivery devices such as supercapacitors (SCs) with properties such as flexibility, miniaturization, biocompatibility, and degradability are sought for such systems. Reducing e-waste and using sustainable materials and processes are additional desirable qualities. Herein, a silk protein-based biocompatible and degradable thin-film microSC (μSC) is reported. A protein carrier with the conducting polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate and reduced graphene oxide dopant is used as a photopatternable biocomposite ink. Active electrodes are fabricated using photolithography under benign conditions, using only water as the solvent. These electrodes are printed on flexible protein sheets to form degradable, organic devices with a benign agarose-NaCl gel electrolyte. High capacitance, power density, cycling stability over 500 cycles, and the ability to power a light-emitting diode are shown. The device is flexible, can sustain cyclic mechanical stresses over 450 cycles, and retain capacitive properties over several days in liquid. Significantly, the μSCs are cytocompatible and completely degraded over the period of ∼1 month. By precise control of the device configuration, these silk protein-based, all-polymer organic devices can be designed to be tunably transient and provide viable alternatives for powering flexible and implantable bioelectronics.

Silk Fibroin for Flexible Electronic Devices

Flexible electronic devices are necessary for applications involving unconventional interfaces, such as soft and curved biological systems, in which traditional silicon-based electronics would confront a mechanical mismatch. Biological polymers offer new opportunities for flexible electronic devices by virtue of their biocompatibility, environmental benignity, and sustainability, as well as low cost. As an intriguing and abundant biomaterial, silk offers exquisite mechanical, optical, and electrical properties that are advantageous toward the development of next-generation biocompatible electronic devices. The utilization of silk fibroin is emphasized as both passive and active components in flexible electronic devices. The employment of biocompatible and biosustainable silk materials revolutionizes state-of-the-art electronic devices and systems that currently rely on conventional semiconductor technologies. Advances in silk-based electronic devices would open new avenues for employing biomaterials in the design and integration of high-performance biointegrated electronics for future applications in consumer electronics, computing technologies, and biomedical diagnosis, as well as human-machine interfaces.

Hybrid Silk Fibers Dry-Spun from Regenerated Silk Fibroin/Graphene Oxide Aqueous Solutions

Regenerated silk fibroin (RSF)/graphene oxide (GO) hybrid silk fibers were dry-spun from a mixed dope of GO suspension and RSF aqueous solution. It was observed that the presence of GO greatly affect the viscosity of RSF solution. The RSF/GO hybrid fibers showed from FTIR result lower β-sheet content compared to that of pure RSF fibers. The result of synchrotron radiation wide-angle X-ray diffraction showed that the addition of GO confined the crystallization of silk fibroin (SF) leading to the decrease of crystallinity, smaller crystallite size, and new formation of interphase zones in the artificial silks. Synchrotron radiation small-angle X-ray scattering also proved that GO sheets in the hybrid silks and blended solutions were coated with a certain thickness of interphase zones due to the complex interaction between the two components. A low addition of GO, together with the mesophase zones formed between GO and RSF, enhanced the mechanical properties of hybrid fibers. The highest breaking stress of the hybrid fibers reached 435.5 ± 71.6 MPa, 23% improvement in comparison to that of degummed silk and 72% larger than that of pure RSF silk fiber. The hybrid RSF/GO materials with good biocompatibility and enhanced mechanical properties may have potential applications in tissue engineering, bioelectronic devices, or energy storage.

A new strategy to tailor the structure of sustainable 3D hierarchical porous N-self-doped carbons from renewable biomass for high-performance supercapacitors and CO2 capture

A new method was employed to obtain 3D hierarchical porous N-self-doped carbons with different porous structures from chitosan for high-performance supercapacitors and CO₂ capture without using porogens, catalysts or activators.