Decay mechanisms of protonated 4-quinolone antibiotics after electrospray ionization and ion activation

The Magnesium Dication and Water Synergistically Promote the Protonolysis of Two of the B-C Bonds in the Tetraphenylborate Anion

Analytes are sampled from both solution phase and gas-phase environments during the ESI process, and thus, the mass spectrum that is measured can reflect both solution and gas-phase conditions. In the gas-phase regime, ion-molecule reactions can influence the types of ions that are observed. Herein, the synergistic effects of a Lewis acid (Mg2+) and background water are shown to lead to protonolysis of two of the B-C bonds of the tetraphenylborate ion in the gas phase, giving rise to different ions at different reaction times in ESI-MS/MS experiments in a linear ion trap mass spectrometer. At short reaction times (1 ms), the expected adduct [Mg(BPh4)]+ is observed. At 10 ms, [(HO)Mg(BPh3)]+ and [(HO)2Mg(BPh2)]+ are observed. At 100 ms, the water adducts [(HO)2Mg(BPh2)(H2O)]+ and [(HO)2Mg(BPh2)(H2O)2]+ appear, and these become the dominant ions at longer reaction times. DFT calculations provide a plausible explanation as to why only [(HO)Mg(BPh3)]+ and [(HO)2Mg(BPh2)]+ but not [(HO)3Mg(BPh)]+ are observed.

Understanding of protomers/deprotomers by combining mass spectrometry and computation

Multifunctional compounds may form different prototropic isomers under different conditions, which are known as protomers/deprotomers. In biological systems, these protomer/deprotomer isomers affect the interaction modes and conformational landscape between compounds and enzymes and thus present different biological activities. Study on protomers/deprotomers is essentially the study on the acidity/basicity of each intramolecular functional group and its effect on molecular structure. In recent years, the combination of mass spectrometry (MS) and computational chemistry has been proven to be a powerful and effective means to study prototropic isomers. MS-based technologies are developed to discriminate and characterize protomers/deprotomers to provide structural information and monitor transformations, showing great superiority than other experimental methods. Computational chemistry is used to predict the thermodynamic stability of protomers/deprotomers, provide the simulated MS/MS spectra, infrared spectra, and calculate collision cross-section values. By comparing the theoretical data with the corresponding experimental results, the researchers can not only determine the protomer/deprotomer structure, but also investigate the structure-activity relationship in a given system. This review covers various MS methods and theoretical calculations and their devotion to isomer discrimination, structure identification, conformational transformation, and phase transition investigation of protomers/deprotomers.

Impact of Ambient Vapors on Spectra of 4-Nitroaniline Recorded under Atmospheric Solids Analysis Probe (ASAP) Mass Spectrometric Conditions

Thermally desorbed 4-nitroaniline (4-NA), upon atmospheric pressure chemical ionization (APCI), generates gaseous ions for its protonated species. The APCI mass spectrum recorded under mild in-source ion-activating conditions from 4-NA showed a peak at m/z 139, whereas that acquired under high ion-activating conditions showed two additional peaks at m/z 122 (^•OH loss) and 92 (^•NO loss). The spectrum changed instantaneously when acetonitrile vapor was introduced to the source. In the new spectrum, both m/z 122 and 92 peaks were absent, while a new peak appeared at m/z 93. Ion-mobility separation carried out with the m/z 139 ion revealed that the initial ion represented the thermodynamically favored nitro-protonated tautomer. The ion population changed to an ensemble dominated by the less-favored amino-protomer when acetonitrile vapor was introduced to the ion source. The amino-protomer, upon collisional activation, loses ^•NO₂ to generate an m/z 93 ion, which was confirmed to be the 4-dehydroanilinium ion. Ion mobility provided a practical way to monitor the changes secured by acetonitrile vapor because the two protomers showed different arrival times. Under spray-ionization conditions, the formation of the thermodynamically less favored protomer has been attributed to kinetic trapping. Our study demonstrated that the less favored amino-protomer could be generated by introducing acetonitrile vapor under nonspray conditions. Apparently, under APCI conditions, protonated water vapor attaches to the nitro group to generate a proton-bound heterodimer, which upon activation dissociates to yield the nitro-protomer. In contrast, protonated acetonitrile makes a tighter complex preferentially with the amino group, which upon activation breaks to the amino-protomer.

Analytical key issues and challenges in the LC-MS/MS determination of antibiotics in wastewater

The research on antibiotics occurrence in the aquatic environment has become a hot topic in the last years due to their potential negative effects, associated to possible bacterial antibiotic-resistance, after continuous exposure to these compounds. Most of antibiotic residues are not completely removed in the wastewater treatment plants (WWTPs) and end up in the aquatic environment through treated wastewater (WW). The development of reliable analytical methodologies for the determination of antibiotics in influent (IWW) and effluent wastewater (EWW) is needed with different purposes, among others: monitoring their occurrence in the aquatic environment, performing environmental risk assessment, estimating removal efficiencies of WWTPs, or estimating the consumption of these compounds. In this paper, we perform an in-depth investigation on analytical key issues that pose difficulties in the determination of antibiotics in complex matrices, such as WW, and we identify challenges to be properly addressed for successful analysis. The analytical technique selected was liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS), as it is the most powerful and widely applied at present for antibiotic residues determination. The mass spectrometric behavior of 18 selected antibiotics, the chromatographic performance, ion ratio variations associated to the sample matrix when using different precursor ions or protomers, and the macrolides adsorption to glass vial, were some of the issues studied in this work. On the basis of the detailed study performed, an analytical LC-MS/MS method based on sample direct injection has been developed for quantification of 18 antibiotics in IWW and EWW, allowing their determination at low ng L^-1 levels.

Solvent-Mediated Proton-Transfer Catalysis of the Gas-Phase Isomerization of Ciprofloxacin Protomers

Understanding how neutral molecules become protonated during positive-ion electrospray ionization (ESI) mass spectrometry is critically important to ensure analytes can be efficiently ionized, detected, and unambiguously identified. The ESI solvent is one of several parameters that can alter the dominant site of protonation in polyfunctional molecules and thus, in turn, can significantly change the collision-induced dissociation (CID) mass spectra relied upon for compound identification. Ciprofloxacin─a common fluoroquinolone antibiotic─is one such example whereby positive-ion ESI can result in gas-phase [M + H]⁺ ions protonated at either the keto-oxygen or the piperazine-nitrogen. Here, we demonstrate that these protonation isomers (or protomers) of ciprofloxacin can be resolved by differential ion mobility spectrometry and give rise to distinctive CID mass spectra following both charge-directed and charge-remote mechanisms. Interaction of mobility-selected protomers with methanol vapor (added via the throttle gas supply) was found to irreversibly convert the piperazine N-protomer to the keto-O-protomer. This methanol-mediated proton-transport catalysis is driven by the overall exothermicity of the reaction, which is computed to favor the O-protomer by 93 kJ mol^-1 (in the gas phase). Conversely, gas phase interactions of mobility-selected ions with acetonitrile vapor selectively depletes the N-protomer ion signal as formation of stable [M + H + CH₃CN]⁺ cluster ions skews the apparent protomer population ratio, as the O-protomer is unaffected. These findings provide a mechanistic basis for tuning protomer populations to ensure faithful characterization of multifunctional molecules by tandem mass spectrometry.

Electronic spectroscopy of differential mobility-selected prototropic isomers of protonated para-aminobenzoic acid

para-Aminobenzoic acid (PABA) was electrosprayed from mixtures of protic and aprotic solvents, leading to formation of two prototropic isomers in the gas phase whose relative populations depended on the composition of the electrospray solvent. The two ion populations were separated in the gas phase using differential mobility spectrometry (DMS) within a nitrogen-only environment at atmospheric pressure. Under high-field conditions, the two prototropic isomers eluted with baseline signal separation with the N-protonated isomer having a more negative CV shift than the O-protonated isomer, in accord with previous DMS studies. The conditions most favorable for formation and separation of each tautomer were used to trap each prototropic isomer in a quadrupole ion trap for photodissociation action spectroscopy experiments. Spectral interrogation of each prototropic isomer in the UV region (3-6 eV) showed good agreement with previously recorded spectra, although a previously reported band (4.8-5.4 eV) was less intense for the O-protonated isomer in our measured spectrum. Without DMS selection, the measured spectra contained features corresponding to both protonated isomers even when solvent conditions were optimised for formation of a single isomer. Interconversion between protonated isomers within the ion trap was observed when protic ESI solvents were employed, leading to spectral cross contamination even with mobility selection. CCSD vertical excitation energies and vertical gradient (VG) Franck-Condon simulations are presented and reproduce the measured spectral features with near-quantitative agreement, providing supporting evidence for spectral assignments.

Investigations into pesticide charge site isomers using conventional IM and cIM systems

A growing number of pesticides are being used around the world necessitating strict regulatory policies to guarantee consumer safety. Liquid Chromatography - Mass Spectrometry (LC-MS) is a highly sensitive method for pesticide screening, which provides retention time, mass/charge ratios and the relative abundances of characteristic product ions. Variability in the latter necessitates relatively large tolerances (±30%, SANCO/12682/2019, current EU regulation). One cause of this variability may stem from the presence of different charge-site isomers (charge carrier being a proton, sodium cation, potassium cation and alike); each yielding a set of different product ions, of which the relative ratios are influenced by solution and ion source conditions. Consequently, varying relative abundances may be observed for analyte ions produced from calibration standards, chemical residues in food matrices and across different instruments. Ion Mobility Spectrometry (IMS) is a fast, gas phase separation technique which can resolve charge-site isomers based on differences in their collisional cross sections (CCSs). We previously used the IM device embedded in LC-IM-MS geometry to generate a pesticide CCS database and subsequently focussed upon identification of pesticides which form charge-site isomers. Latterly, we applied this approach to screen food commodities for pesticide residues. In some instances, isomer separation was clear, however sometimes broad, unresolved distributions were observed. Using a high-resolution cyclic IM device (cIM) we resolved and determined CCS values of species of indoxacarb, spinosad, fenpyroximate, epoxiconazole, metaflumizone and avermectin. Furthermore, utilising novel cIM functionalities (tandem-IM) we discovered that two spinosyn sodimers can interconvert in the gas phase.

Impact of Ambient Vapors Present in an Electrospray Ionization Source on Gas-Phase Ion Structures

According to current consensus, structures of protomeric (or deprotomeric) tautomers of gaseous ions generated by electrospray ionization depend primarily on the nature of the spray solvent. To probe the effect of the spray solvent on protonation, 4-aminobenzoic acid (PABA) has often been selected as the model compound. It is widely accepted that the protonation in the gas phase takes place primarily on the carbonyl oxygen atom when the sample is sprayed in methanol and on the nitrogen atom when acetonitrile is used as the spray solvent. Although this observation is valid, our current results indicate that the determination of the predominant protomer in the gas phase by the spray solvent is an indirect effect moderated by the solvent vapor molecules present in the ambient ion source. To investigate real-time changes in protomer distributions due to solvents, we used ion-mobility mass spectrometry (IM-MS). Initially, when a PABA solution in methanol was electrosprayed, the ion-mobility arrival-time profile recorded showed essentially one peak for the O-protomer. However, when acetonitrile or acetone vapors were introduced to the ambient-pressure ion source via the flowing desolvation gas, the intensity of the O-protomer peak diminished rapidly, and the N-protomer signal became dominant. The moment the acetonitrile (or acetone) vapors were removed from the ion source, the protomer-distribution signals began gradually reverting back to their original intensities. Furthermore, when PABA samples in methanol and acetonitrile were electrosprayed separately via a dual-sprayer setup, which allowed for the selective blocking of the gaseous ion-generation cascade of charged droplets from either sprayer, the predominant signal corresponded only to the N-protomer, irrespective of the position of the mechanical barrier. Because the mechanical barrier prevents only the gaseous ion formation, but not the physical access of solvent vapors to the ion source, it is evident that the solvent vapor that engulfs the ion source is the governing factor that decides the protomer distribution, not the nature of the spray solvent. Noticeably, acetonitrile wields a stronger effect on the manifested protomer distribution than many other solvents, including methanol, water, hexanes, and toluene. Apparently, the so-called "memory" of the solution-phase structures and the phenomenon described as "kinetic trapping" are both due to indirect effects caused by the solvent vapor engulfing the atmospheric-pressure ion source. Moreover, the so-called "memory" effect can either be "saved" or "erased" by exposing the initially formed gaseous ions to different solvent vapors from an alternative source.

LC-MS analysis of p-aminosalicylic acid under electrospray ionization conditions manifests a profound solvent effect

Under identical mass spectrometric conditions, chromatographic peak intensities of p-aminosalicylic acid recorded by LC-MS, using methanol as the mobile phase are drastically different from those acquired using is it acetonitrile as the eluent.

Investigations into the performance of travelling wave enabled conventional and cyclic ion mobility systems to characterise protomers of fluoroquinolone antibiotic residues

RATIONALE

Fluoroquinolones (FLQs) have been shown to form protomers with distinctive fragment profiles. Experimental parameters affect protomer formation, impacting observed conventional tandem mass spectrometric (MS/MS) dissociation and multiple reaction monitoring (MRM) transition reproducibility. Collision cross section (CCS) measurement can provide an additional identification metric and improved ion mobility (IM) separation strategies could provide further understanding of fluctuations in fragmentation when using electrospray ionisation (ESI).

METHODS

Porcine muscle tissue was fortified with nine fluoroquinolone antibiotics. Extracts were cleaned using QuEChERS dispersive extraction. Separation was achieved via ultra-high-performance liquid chromatography (UHPLC) and analysis performed using positive ion ESI coupled with linear T-wave IM (N₂ and CO₂ drift gas) and cyclic IM-MS (calibrated to perform accurate mass and CCS measurement).

RESULTS

IM-resolved protomeric species have been observed for nine FLQs (uniquely three for danofloxacin). Long-term reproducibility and cross-platform T-wave/cIM studies have demonstrated CCS metric errors <1.5% when compared with a FLQ protomer reference CCS library. When comparing FLQ protomer separation using a standard, linear T-wave IM separator (N₂ /CO₂ ) and using a high-resolution cyclic T-wave device (N₂ ), protomer peak-to-peak resolution ranged between Rs = 1 to Rs = 6 for the IM strategies utilised.

CONCLUSIONS

CCS is a reliable cross platform metric; specific FLQ CCS identification fingerprints have been produced, illustrating the potential to compliment MS/MS specificity or provide an alternative identification metric. Using cIM there is opportunity to correlate the erratic nature of protomer formation with the analytical conditions used and to gain further understanding of ionisation/dissociation mechanisms taking place during routine analyses.

Using differential ion mobility spectrometry to perform class-specific ion-molecule reactions of 4-quinolones with selected chemical reagents

Gas phase ion/molecule reactions are often used in analytical applications to support the analysis of isomers or to identify specific functional groups of organic molecules. Until now, deliberate chemical reactions have not been performed in differential ion mobility spectrometry (DMS) devices except for hydrogen exchange and cluster formation. The present work extends that of Colorado and Brodbelt (Anal Chem 66:2330-5, 1994) on ion/molecule reactions in an ion trap mass spectrometer. In this study, class-specific chemical reactions of 4-quinolone antibiotics with various chemical reagents were used to demonstrate the analytical utility of ion/molecule reactions in a DMS drift cell. For these reactions, dehydrated reactive precursor ions were initially formed and made to undergo annulation reactions with selected reagents within the timescale of the DMS separation. Careful study of the energies required for dissociation of the adducts confirmed the covalent nature of the newly formed bond; thus demonstrating the analytical utility of this approach. Graphical abstract.

Gas-phase protomers of p-(dimethylamino)chalcone investigated by travelling-wave ion mobility mass spectrometry (TWIMS)

Results from ion-mobility (IM) separation experiments demonstrate that O- and N-protomers of p-(dimethylamino)chalcone (p-DMAC) can coexist in the gas phase. The relative populations of the two protomers strongly depend on the ion-generating settings and the conditions the precursor ions experience from the point of their gas-phase inception to the time of their detection. Under relatively dry source conditions, the ratio of the gas-phase protomers generated under helium-plasma ionization (HePI) conditions is biased towards the thermodynamically favored O-protomer. However, when the humidity of the enclosed ion source was increased, the IM arrival-time distribution profile of the mass-selected protonated precursor of p-DMAC changed rapidly to one dominated by the N-protomer. Under spray-ionization conditions, the formation of the thermodynamically less favored protomer has been generally attributed to a phenomenon called kinetic trapping. Herein, we demonstrate that the population of thermodynamically less favored N-protomer can be dramatically increased simply by introducing water vapor to the HePI ion source.

Ciprofloxacin by-products in seawater environment in the presence and absence of gilt-head bream

The widespread use of pharmaceuticals has caused a growing concern on the presence of pharmaceuticals such as the antibiotic ciprofloxacin (CIPRO) in the aquatic environment, since they may exert adverse effects on non-target organisms, including fish. In order to study the uptake, distribution in different tissues (liver, muscle, brain and gill) and biofluids (plasma and bile), metabolism and elimination of CIPRO in gilt-head bream (Sparus aurata), controlled dosing experiments for 8 days at 200 μg/L concentration were carried out. CIPRO was only observed in bile at concentration up to 315 ± 4 ng/mL, probably due to its low octanol-water partition coefficient (log P = -2.4 at pH 7.4) and the zwitterionic behavior (pKa₁ = 5.76 and pKa₂ = 8.68). CIPRO by-products (BPs) were also identified in seawater environment, both in presence and absence of fish. The analysis done by means of liquid chromatography-high resolution mass spectrometry (hybrid quadrupole-Orbitrap) permitted the annotation of up to 35 BPs of CIPRO in seawater and bile, from which 30 structures were reported for the first time. These results confirm that CIPRO is very susceptible to photolysis, and that it goes through various phase I and phase II metabolisms in the fish. All these results suggested that, for a complete characterization of CIPRO exposure, BPs should also be included in the biomonitoring campaigns since they might also be toxicologically relevant.

Relationship Between Fluoroquinolone Structure and Neurotoxicity Revealed by Zebrafish Neurobehavior

Central nervous system side effects are one of the most frequently reported adverse reactions of fluoroquinolones (FQs). However, the mechanism is not fully understood. In this study, zebrafish ( Danio rerio) were used as a model system. We quantified neurobehavior by recording indicators with automated video-tracking and used liquid chromatography-tandem mass spectrometry to detect drug absorption in vivo. We studied embryotoxicity and effects on zebrafish locomotor activity of 17 typical FQs. In addition, we calculated the stable conformation of typical FQs in aqueous conditions. The relationships between structure, neurotoxicity, and embryotoxicity were analyzed. The results indicate: (1) The effects of FQs on zebrafish neurobehavior can be divided into four categories. Type I has no significant influence on locomotor activity. Type II suppresses locomotor activity. Type III inhibits at low concentration and stimulates at high concentration. Type IV stimulates and then suppresses (biphasic response). (2) Structural modifications of FQs can change toxicity properties in zebrafish. Cleavage of the C-7 piperazinyl structure decreases neurotoxicity but enhances embryotoxicity. The C-3 decarboxyl formation and 5-NH₂ derivatives might enhance embryotoxicity and neurotoxicity. (3) There are two toxic functional groups. The piperazinyl structure at position C-7 (toxic functional group I) can cause primary reactions which may be by the inhibition of γ-aminobutyric acid receptors, and the nucleus containing a carboxyl group at position 3 (toxic functional group II) might cause a reaction secondary to the effect of toxic functional group I and reverse its effects.

Influence of Ionization Source Conditions on the Gas-Phase Protomer Distribution of Anilinium and Related Cations

The gas-phase-ion generation technique and specific ion-source settings of a mass spectrometer influence heavily the protonation processes of molecules and the abundance ratio of the generated protomers. Hitherto that has been attributed primarily to the nature of the solvent and the pH. By utilizing electrospray ionization and ion-mobility mass spectrometry (IM-MS), we demonstrate, even in the seemingly trivial case of protonated aniline, that the protomer ratio strongly depends on the source conditions. Under low in-source ion activation, nearly 100% of the N-protomer of aniline is produced, and it can be subsequently converted to the C-protomer by collisional activation effected by increasing the electrical potential difference between the entrance and exit orifices of the first vacuum region. This activation and transformation process takes place even before the ion is mass-selected and subjected to IM separation. Despite the apparent simplicity of the problem, the preferred protonation site of aniline in the gas phase-the amino group or the aromatic ring-has been a topic of controversy. Our results not only provide unambiguous evidence that ring- and nitrogen-protonated aniline can coexist and be interconverted in the gas phase, but also that the ratio of the protomers depends on the internal energy of the original ion. There are many dynamic ion-transformation and fragmentation processes that take place in the different physical compartments of a Synapt G2 HDMS instrument. Such processes can dramatically change the very identity even of small ions, and therefore should be taken into account when interpreting product-ion mass spectra. Graphical Abstract ᅟ.

Analyzing Glycopeptide Isomers by Combining Differential Mobility Spectrometry with Electron- and Collision-Based Tandem Mass Spectrometry

Differential mobility spectrometry (DMS) has been employed to separate isomeric species in several studies. Under the right conditions, factors such as separation voltage, temperature, the presence of chemical modifiers, and residence time can combine to provide unique signal channels for isomeric species. In this study, we examined a set of glycopeptide isomers, MUC5AC-3 and MUC5AC-13, which bear an N-acetyl-galactosamine (GalNAc) group on either threonine-3 or threonine-13. When analyzed as a mixture, the resulting MS and MS/MS spectra yield fragmentation patterns that cannot discern these convolved species. However, when DMS is implemented during the analysis of this mixture, two features emerge in the DMS ionogram representing the two glycopeptide isomers. In addition, by locking in DMS parameters at each feature, we could observe several low intensity CID fragments that contain the GalNAc functionality-specific amino acid residues - identifying the DMS separation of each isomer without standards. Besides conventional CID MS/MS, we also implemented electron-capture dissociation (ECD) after DMS separation, and clearly resolved both isomers with this fragmentation method, as well. The electron energy used in these ECD experiments could be tuned to obtain maximum sequence coverage for these glycopeptides; this was critical as these ions were present as doubly protonated species, which are much more difficult to fragment efficiently via electron-transfer dissociation (ETD). Overall, the combination of DMS with electron- or collision-based MS/MS methods provided enhanced separation and sequence coverage for these glycopeptide isomers. Graphical Abstract ᅟ.

Differential mobility spectrometry/mass spectrometry history, theory, design optimization, simulations, and applications

This review of differential mobility spectrometry focuses primarily on mass spectrometry coupling, starting with the history of the development of this technique in the Soviet Union. Fundamental principles of the separation process are covered, in addition to efforts related to design optimization and advancements in computer simulations. The flexibility of differential mobility spectrometry design features is explored in detail, particularly with regards to separation capability, speed, and ion transmission. 2015 Wiley Periodicals, Inc. Mass Spec Rev 35:687-737, 2016.

Studying Gas-Phase Interconversion of Tautomers Using Differential Mobility Spectrometry

In this study, we report on the use of differential mobility spectrometry (DMS) as a tool for studying tautomeric species, allowing a more in-depth interrogation of these elusive isomers using ion/molecule reactions and tandem mass spectrometry. As an example, we revisit a case study in which gas-phase hydrogen-deuterium exchange (HDX)-a probe of ion structure in mass spectrometry-actually altered analyte ion structure by tautomerization. For the N- and O-protonated tautomers of 4-aminobenzoic acid, when separated using DMS and subjected to subsequent HDX with trace levels of D2O, the anticipated difference between the exchange rates of the two tautomers is observed. However, when using higher levels of D2O or a more basic reagent, equivalent and almost complete exchange of all labile protons is observed. This second observation is a result of the interconversion of the N-protonated tautomer to the O-protonated form during HDX. We can monitor this transformation experimentally, with support from detailed molecular dynamics and electronic structure calculations. In fact, calculations suggest the onset of bulk solution phase properties for 4-aminobenzoic acid upon solvation with eight CH3OH molecules. These findings also underscore the need for choosing HDX reagents and conditions judiciously when separating interconvertible isomers using DMS. Graphical Abstract ᅟ.