Wound dressings: selecting the most appropriate type

Performance of a gelling fibre dressing in management of wounds in a community setting: a sub-analysis of the VIPES study

OBJECTIVE

To evaluate the use and performance of a gelling fibre dressing (Biatain Fiber; Coloplast A/S, Denmark) in the management of wounds in community nursing practice.

METHOD

A sub-analysis of the prospective, observational, real-world VIPES (Observatoire en Ville des Plaies ExSudatives) study was conducted. Patients with exuding wounds, for which nurses chose to apply the gelling fibre as a primary dressing, were included. Outcomes included assessments of wound condition and patient/nurse opinion.

RESULTS

Overall, 149 patients with acute (n=52; 34.9%) or hard-to-heal (chronic) (n=97; 65.1%) wounds were included. At baseline, mean±standard deviation wound age was 351.5±998.2 days, 108 (72.5%) wounds were moderately-to-highly exuding, and 126 (84.6%) showed exudate pooling in the wound bed. At the last follow-up visit, 29 (19.5%) wounds had healed, within a median of 36 days, and 64 (43.0%) were progressing towards healing. From baseline to the last follow-up visit, significant reductions in wound surface area (p<0.05), depth (p<0.01), exudate level (p<0.0001), and in the proportion of wounds with sloughy tissue (p<0.0001) were observed. Most wounds had no (n=86; 58.5% (two missing values)) or low exudate pooling (n=45; 30.6% (two missing values)) at the last visit and proportions of patients with healthy wound edges/periwound skin increased from baseline. At the last visit, wounds were considered improved by nurses in 71.4% (n=105) of cases, and by patients in 66.7% (n=98) of cases (two patients missing).

CONCLUSION

Patients who received treatment with the gelling fibre experienced improvements in the condition of a range of complex wounds. This analysis highlights the importance of adequate exudate management, and indicates how the selection of an appropriate wound dressing can encourage healing progression.

DECLARATION OF INTEREST

This study was financially supported by Laboratoires Coloplast SAS, Paris, France. Coloplast A/S funded the writing and editing of the article and contributed to its content. Coloplast A/S and Laboratoires Coloplast SAS reviewed the article for scientific accuracy. Nurses received financial compensation for their participation in the study. NA is a full-time employee of Coloplast A/S. APJ was an employee of Coloplast A/S when this article was written. FA was a full-time employee of Laboratoires Coloplast SAS at the time of publication development. RS and CJ are full-time employees of CEN Biotech. AK received an educational grant from Coloplast A/S to provide scientific input to the publication. The authors have no other conflicts of interest to declare.

Follicular unit grafting in chronic ulcers: a valuable technique for integrated management

Chronic ulcers significantly affect the quality of life of patients and impose a high cost on the healthcare system. The therapeutic management should be comprehensive, taking into consideration the etiological diagnosis of the wound and the characteristics of the wound bed when deciding on a therapeutic proposal appropriate to the healing phase, correcting factors that delay healing. During the epithelialization phase, repair techniques with grafts are recommended to shorten re-epithelialization time, improve the quality of scar tissue, and achieve adequate pain management. Currently, due to the reported benefits of skin appendages, the technique of follicular unit auto-grafting obtained with a scalp punch is among the chosen strategies for wound repair. This is a minimally invasive, outpatient practice, whose technique has advantages over the donor site, patients recovery and well-being.

Innovative approaches to wound healing: insights into interactive dressings and future directions

The objective of this review is to provide an up-to-date and all-encompassing account of the recent advancements in the domain of interactive wound dressings. Considering the gap between the achieved and desired clinical outcomes with currently available or under-study wound healing therapies, newer more specific options based on the wound type and healing phase are reviewed. Starting from the comprehensive description of the wound healing process, a detailed classification of wound dressings is presented. Subsequently, we present an elaborate and significant discussion describing interactive (unconventional) wound dressings. Latter includes biopolymer-based, bioactive-containing and biosensor-based smart dressings, which are discussed in separate sections together with their applications and limitations. Moreover, recent (2-5 years) clinical trials, patents on unconventional dressings, marketed products, and other information on advanced wound care designs and techniques are discussed. Subsequently, the future research direction is highlighted, describing peptides, proteins, and human amniotic membranes as potential wound dressings. Finally, we conclude that this field needs further development and offers scope for integrating information on the healing process with newer technologies.

Biodegradable Silk Fibroin Matrices for Wound Closure in a Human 3D Ex Vivo Approach

In this study, the potential of silk fibroin biomaterials for enhancing wound healing is explored, focusing on their integration into a human 3D ex vivo wound model derived from abdominoplasties. For this purpose, cast silk fibroin membranes and electrospun nonwoven matrices from Bombyx mori silk cocoons were compared to untreated controls over 20 days. Keratinocyte behavior and wound healing were analyzed qualitatively and quantitatively by histomorphometric and immune histochemical methods (HE, Ki67, TUNEL). Findings reveal rapid keratinocyte proliferation on both silk fibroin membrane and nonwoven matrices, along with enhanced infiltration in the matrix, suggesting improved early wound closure. Silk fibroin membranes exhibited a significantly improved early regeneration, followed by nonwoven matrices (p < 0.05) compared to untreated wounds, resulting in the formation of multi-layered epidermal structures with complete regeneration. Overall, the materials demonstrated excellent biocompatibility, supporting cell activity with no signs of increased apoptosis or early degradation. These results underscore silk fibroin's potential in clinical wound care, particularly in tissue integration and re-epithelialization, offering valuable insights for advanced and-as a result of the electrospinning technique-individual wound care development. Furthermore, the use of an ex vivo wound model appears to be a viable option for pre-clinical testing.

Dual Drug-Loaded Coaxial Nanofiber Dressings for the Treatment of Diabetic Foot Ulcer

Introduction

Diabetes mellitus is frequently associated with foot ulcers, which pose significant health risks and complications. Impaired wound healing in diabetic patients is attributed to multiple factors, including hyperglycemia, neuropathy, chronic inflammation, oxidative damage, and decreased vascularization.

Rationale

To address these challenges, this project aims to develop bioactive, fast-dissolving nanofiber dressings composed of polyvinylpyrrolidone loaded with a combination of an antibiotic (moxifloxacin or fusidic acid) and anti-inflammatory drug (pirfenidone) using electrospinning technique to prevent the bacterial growth, reduce inflammation, and expedite wound healing in diabetic wounds.

Results

The fabricated drug-loaded fibers exhibited diameters of 443 ± 67 nm for moxifloxacin/pirfenidone nanofibers and 488 ± 92 nm for fusidic acid/pirfenidone nanofibers. The encapsulation efficiency, drug loading and drug release studies for the moxifloxacin/pirfenidone nanofibers were found to be 70 ± 3% and 20 ± 1 µg/mg, respectively, for moxifloxacin, and 96 ± 6% and 28 ± 2 µg/mg, respectively, for pirfenidone, with a complete release of both drugs within 24 hours, whereas the fusidic acid/pirfenidone nanofibers were found to be 95 ± 6% and 28 ± 2 µg/mg, respectively, for fusidic acid and 102 ± 5% and 30 ± 2 µg/mg, respectively, for pirfenidone, with a release rate of 66% for fusidic acid and 80%, for pirfenidone after 24 hours. The efficacy of the prepared nanofiber formulations in accelerating wound healing was evaluated using an induced diabetic rat model. All tested formulations showed an earlier complete closure of the wound compared to the controls, which was also supported by the histopathological assessment. Notably, the combination of fusidic acid and pirfenidone nanofibers demonstrated wound healing acceleration on day 8, earlier than all tested groups.

Conclusion

These findings highlight the potential of the drug-loaded nanofibrous system as a promising medicated wound dressing for diabetic foot applications.

Production of mono and bilayer devices for wound dressing by coupling of electrospinning and supercritical impregnation techniques

In this paper, electrospinning and supercritical impregnation were coupled to produce polyurethane fibrous membranes loaded with mesoglycan and lactoferrin. The proposed methodology allowed the production of three skin wound healing bilayer systems: a first system containing mesoglycan loaded through electrospinning and lactoferrin loaded by supercritical impregnation, a second system where the use of the two techniques was reversed, and a third sample where the drugs were both encapsulated through a one-step process. SEM analysis demonstrated the formation of microfibers with a homogeneous drug distribution. The highest loadings were 0.062 g/g for mesoglycan and 0.013 g/g for lactoferrin. Then, hydrophilicity and liquid retention analyses were carried out to evaluate the possibility of using the manufacturers as active patches. The kinetic profiles, obtained through in vitro tests conducted using a Franz diffusion cell, proved that the diffusion of the active drugs followed a double-step release before attaining the equilibrium after about 30 h. When the electrospun membranes were placed in contact with HUVEC, HaCaT, and BJ cell lines, as human endothelial cells, keratinocytes, and fibroblasts, respectively, no cytotoxic events were assessed. Finally, the capacity of the most promising system to promote the healing process was performed by carrying out scratch tests on HaCat cells.

Intelligent electrospinning nanofibrous membranes for monitoring and promotion of the wound healing

The incidence of chronic wound healing is promoted by the growing trend of elderly population, obesity, and type II diabetes. Although numerous wound dressings have been studied over the years, it is still challenging for many wound dressings to perfectly adapt to the healing process due to the dynamic and complicated wound microenvironment. Aiming at an optimal reproduction of the physiological environment, multifunctional electrospinning nanofibrous membranes (ENMs) have emerged as a promising platform for the wound treatment owing to their resemblance to extracellular matrix (ECM), adjustable preparation processes, porousness, and good conformability to the wound site. Moreover, profiting from the booming development of human-machine interaction and artificial intelligence, a next generation of intelligent electrospinning nanofibrous membranes (iENMs) based wound dressing substrates that could realize the real-time monitoring of wound proceeding and individual-based wound therapy has evoked a surge of interest. In this regard, general wound-related biomarkers and process are overviewed firstly and representative iENMs stimuli-responsive materials are briefly summarized. Subsequently, the emergent applications of iENMs for the wound healing are highlighted. Finally, the opportunities and challenges for the development of next-generation iENMs as well as translating iENMs into clinical practice are evaluated.

Cell-Derived Matrix: Production, Decellularization, and Application of Wound Repair

Chronic nonhealing wounds significantly reduce patients' quality of life and are a major burden on healthcare systems. Over the past few decades, tissue engineering materials have emerged as a viable option for wound healing, with cell-derived extracellular matrix (CDM) showing remarkable results. The CDM's compatibility and resemblance to the natural tissue microenvironment confer distinct advantages to tissue-engineered scaffolds in wound repair. This review summarizes the current processes for CDM preparation, various cell decellularization protocols, and common characterization methods. Furthermore, it discusses the applications of CDM in wound healing, including skin defect and wound repair, angiogenesis, and engineered vessels, and offers perspectives on future developments.

Novel Functional Dressing Materials for Intraoral Wound Care

Intraoral wounds represent a particularly challenging category of mucosal and hard tissue injuries, characterized by the unique structures, complex environment, and distinctive healing processes within the oral cavity. They have a common occurrence yet frequently inflict significant inconvenience and pain on patients, causing a serious decline in the quality of life. A variety of novel functional dressings specifically designed for the moist and dynamic oral environment have been developed and realized accelerated and improved wound healing. Thoroughly analyzing and summarizing these materials is of paramount importance in enhancing the understanding and proficiently managing intraoral wounds. In this review, the particular processes and unique characteristics of intraoral wound healing are firstly described. Up-to-date knowledge of various forms, properties, and applications of existing products are then intensively discussed, which are categorized into animal products, plant extracts, natural polymers, and synthetic products. To conclude, this review presents a comprehensive framework of currently available functional intraoral wound dressings, with an aim to provoke inspiration of future studies to design more convenient and versatile materials.

Exosome-loaded decellularized tissue: Opening a new window for regenerative medicine

Mesenchymal stem cell-derived exosomes (MSCs-EXO) have received a lot of interest recently as a potential therapeutic tool in regenerative medicine. Extracellular vesicles (EVs) known as exosomes (EXOs) are crucial for cell-cell communication throughout a variety of activities including stress response, aging, angiogenesis, and cell differentiation. Exploration of the potential use of EXOs as essential therapeutic effectors of MSCs to encourage tissue regeneration was motivated by success in the field of regenerative medicine. EXOs have been administered to target tissues using a variety of methods, including direct, intravenous, intraperitoneal injection, oral delivery, and hydrogel-based encapsulation, in various disease models. Despite the significant advances in EXO therapy, various methods are still being researched to optimize the therapeutic applications of these nanoparticles, and it is not completely clear which approach to EXO administration will have the greatest effects. Here, we will review emerging developments in the applications of EXOs loaded into decellularized tissues as therapeutic agents for use in regenerative medicine in various tissues.

Design, optimization and pharmaceutical characterization of wound healing film dressings with chloramphenicol and ibuprofen

OBJECTIVE

The aim of the present study was to develop and optimize a wound dressing film loaded with chloramphenicol (CAM) and ibuprofen (IBU) using a Quality by Design (QbD) approach.

SIGNIFICANCE

The two drugs have been combined in the same dressing as they address two critical aspects of the wound healing process, namely prevention of bacterial infection and reduction of inflammation and pain related to injury.

METHODS

Three critical formulation variables were identified, namely the ratios of Kollicoat SR 30D, polyethylene glycol 400 and polyvinyl alcohol. These variables were further considered as factors of an experimental design, and 17 formulations loaded with CAM and IBU were prepared via solvent casting. The films were characterized in terms of dimensions, mechanical properties and bioadhesion. Additionally, the optimal formulation was characterized regarding tensile properties, swelling behavior, water vapor transmission rate, surface morphology, thermal behavior, goniometry, in vitro drug release, cell viability, and antibacterial activity.

RESULTS

The film was optimized by setting minimal values for the folding endurance, adhesive force and hardness. The optimally formulated film showed good fluid handling properties in terms of swelling behavior and water vapor transmission rate. IBU and CAM were released from the film up to 80.9% and 82.5% for 8 h. The film was nontoxic, and the antibacterial activity was prominent against Micrococcus spp. and Streptococcus pyogenes.

CONCLUSIONS

The QbD approach was successfully implemented to develop and optimize a novel film dressing promising for the treatment of low-exuding acute wounds prone to infection and inflammation.

Silk fibroin sponge impregnated with fish bone collagen: A promising wound healing scaffold and skin tissue regeneration

In the present study, porous silk fibroin sponges (SFS) were prepared using silk fibroin (SF), fish bone collagen (FBC), and olive oil (OO). The study investigates the potential use of using this sponge as skin tissue regeneration. The sponge was characterized for its physicochemical, mechanical, antimicrobial, and drug release properties. An in vitro study was carried out using human keratinocyte cell line (HaCaT). Biodegradation study using enzymatic method was carried out. The results showed that the mechanical properties such as tensile strength (23.40 ± 0.05 MPa), elongation at break (14.25 ± 0.02%), and water absorption (30.23 ± 0.01%) of the SFS were excellent, indicating promising performance. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays proved the biocompatible nature of the SFS. The SFS exhibited outstanding antibacterial properties against E. coli (4.72 ± 0.05 mm) and S. aureus (4.98 ± 0.07 mm). The developed SFS promote a promising solution for skin tissue regeneration and wound dressing.

Bringing innovative wound care polymer materials to the market: Challenges, developments, and new trends

The development of innovative products for treating acute and chronic wounds has become a significant topic in healthcare, resulting in numerous products and innovations over time. The growing number of patients with comorbidities and chronic diseases, which may significantly alter, delay, or inhibit normal wound healing, has introduced considerable new challenges into the wound management scenario. Researchers in academia have quickly identified promising solutions, and many advanced wound healing materials have recently been designed; however, their successful translation to the market remains highly complex and unlikely without the contribution of industry experts. This review article condenses the main aspects of wound healing applications that will serve as a practical guide for researchers working in academia and industry devoted to designing, evaluating, validating, and translating polymer wound care materials to the market. The article highlights the current challenges in wound management, describes the state-of-the-art products already on the market and trending polymer materials, describes the regulation pathways for approval, discusses current wound healing models, and offers a perspective on new technologies that could soon reach consumers. We envision that this comprehensive review will significantly contribute to highlighting the importance of networking and exchanges between academia and healthcare companies. Only through the joint of these two actors, where innovation, manufacturing, regulatory insights, and financial resources act in harmony, can wound care products be developed efficiently to reach patients quickly and affordably.

Biomedical applications of stimuli-responsive "smart" interpenetrating polymer network hydrogels

In recent years, owing to the ongoing advancements in polymer materials, hydrogels have found increasing applications in the biomedical domain, notably in the realm of stimuli-responsive "smart" hydrogels. Nonetheless, conventional single-network stimuli-responsive "smart" hydrogels frequently exhibit deficiencies, including low mechanical strength, limited biocompatibility, and extended response times. In response, researchers have addressed these challenges by introducing a second network to create stimuli-responsive "smart" Interpenetrating Polymer Network (IPN) hydrogels. The mechanical strength of the material can be significantly improved due to the topological entanglement and physical interactions within the interpenetrating structure. Simultaneously, combining different network structures enhances the biocompatibility and stimulus responsiveness of the gel, endowing it with unique properties such as cell adhesion, conductivity, hemostasis/antioxidation, and color-changing capabilities. This article primarily aims to elucidate the stimulus-inducing factors in stimuli-responsive "smart" IPN hydrogels, the impact of the gels on cell behaviors and their biomedical application range. Additionally, we also offer an in-depth exposition of their categorization, mechanisms, performance characteristics, and related aspects. This review furnishes a comprehensive assessment and outlook for the advancement of stimuli-responsive "smart" IPN hydrogels within the biomedical arena. We believe that, as the biomedical field increasingly demands novel materials featuring improved mechanical properties, robust biocompatibility, and heightened stimulus responsiveness, stimuli-responsive "smart" IPN hydrogels will hold substantial promise for wide-ranging applications in this domain.

Film dressings from Thai mango seed kernel extracts versus nanocrystalline silver dressings in antibacterial properties

Introduction: The extract from the Mango Seed Kernel (MSK) has been documented to exhibit antibacterial activity against Gram-positive and Gram-negative bacteria, including Staphylococcus aureus and Pseudomonas aeruginosa. This suggests that biomaterials containing MSK extract could be a viable alternative to conventional wound treatments, such as nanocrystalline silver dressings. Despite this potential, there is a notable gap in the literature regarding comparing the antibacterial effectiveness of MSK film dressings with nanocrystalline silver dressings. This study aimed to develop film dressings containing MSK extract and evaluate their antibacterial properties compared to nanocrystalline silver dressings. Additionally, the study aimed to assess other vital physical properties of these dressings critical for effective wound care. Materials and methods: We prepared MSK film dressings from two cultivars of mango from Thailand, 'Chokanan' and 'Namdokmai'. The inhibition-zone method was employed to determine the antibacterial property. The morphology and chemical characterization of the prepared MSK film dressings were examined with scanning electron microscopy (SEM) and Fourier-Transform Infrared Spectroscopy (FTIR), respectively. The absorption of pseudo-wound exudate and water vapor transmission rate (WVTR) of film dressings were evaluated. Results: The results showed that 40% of MSKC film dressing had the highest inhibition zone (20.00 ± 0.00 mm against S. aureus and 17.00 ± 1.00 mm against P. aeruginosa) and 20%, 30%, and 40% of MSKC and MSKN film dressings had inhibition zones similar to nanocrystalline silver dressing for both S. aureus and P. aeruginosa (p > 0.05). In addition, all concentrations of the MSK film dressings had low absorption capacity, and Chokanan MSK (MSKC) film dressings had a higher WVTR than Namdokmai MSK (MSKN) film dressings. Conclusion: 20%, 30%, and 40% of MSK film dressing is nearly as effective as nanocrystalline silver dressing. Therefore, it has the potential to be an alternative antibacterial dressing and is suitable for wounds with low exudate levels.

Oxidized alginate-gelatin (ADA-GEL)/silk fibroin/Cu-Ag doped mesoporous bioactive glass nanoparticle-based hydrogels for potential wound care treatments

The present work focuses on developing 5% w/v oxidized alginate (alginate di aldehyde, ADA)-7.5% w/v gelatin (GEL) hydrogels incorporating 0.25% w/v silk fibroin (SF) and loaded with 0.3% w/v Cu-Ag doped mesoporous bioactive glass nanoparticles (Cu-Ag MBGNs). The microstructural, mechanical, and biological properties of the composite hydrogels were characterized in detail. The porous microstructure of the developed ADA-GEL based hydrogels was confirmed by scanning electron microscopy, while the presence of Cu-Ag MBGNs in the synthesized hydrogels was determined using energy dispersive x-ray spectroscopy. The incorporation of 0.3% w/v Cu-Ag MBGNs reduced the mechanical properties of the synthesized hydrogels, as investigated using micro-tensile testing. The synthesized ADA-GEL loaded with 0.25% w/v SF and 0.3% w/v Cu-Ag MBGNs showed a potent antibacterial effect againstEscherichia coliandStaphylococcus aureus. Cellular studies using the NIH3T3-E1 fibroblast cell line confirmed that ADA-GEL films incorporated with 0.3% w/v Cu-Ag MBGNs exhibited promising cellular viability as compared to pure ADA-GEL (determined by WST-8 assay). The addition of SF improved the biocompatibility, degradation rate, moisturizing effects, and stretchability of the developed hydrogels, as determinedin vitro. Such multimaterial hydrogels can stimulate angiogenesis and exhibit desirable antibacterial properties. Therefore further (in vivo) tests are justified to assess the hydrogels' potential for wound dressing and skin tissue healing applications.

Natural polyphenols for drug delivery and tissue engineering construction: A review

Polyphenols, natural compounds rich in phenolic structures, are gaining prominence due to their antioxidant, anti-inflammatory, antibacterial, and anticancer properties, making them valuable in biomedical applications. Through covalent and noncovalent interactions, polyphenols can bind to biomaterials, enhancing their performance and compensating for their shortcomings. Such polyphenol-based biomaterials not only increase the efficacy of polyphenols but also improve drug stability, control release kinetics, and boost the therapeutic effects of drugs. They offer the potential for targeted drug delivery, reducing off-target impacts and enhancing therapeutic outcomes. In tissue engineering, polyphenols promote cell adhesion, proliferation, and differentiation, thus aiding in the formation of functional tissues. Additionally, they offer excellent biocompatibility and mechanical strength, essential in designing scaffolds. This review explores the significant roles of polyphenols in tissue engineering and drug delivery, emphasizing their potential in advancing biomedical research and healthcare.

Porous Collagen Sponge Loaded with Large Efficacy-Potentiated Exosome-Mimicking Nanovesicles for Diabetic Skin Wound Healing

Diabetic skin wounds are difficult to heal quickly due to insufficient angiogenesis and prolonged inflammation, which is an urgent clinical problem. To address this clinical problem, it becomes imperative to develop a dressing that can promote revascularization and reduce inflammation during diabetic skin healing. Herein, a multifunctional collagen dressing (CTM) was constructed by loading large efficacy-potentiated exosome-mimicking nanovesicles (L-Meseomes) into a porous collagen sponge with transglutaminase (TGase). L-Meseomes were constructed in previous research with the function of promoting cell proliferation, migration, and angiogenesis and inhibiting inflammation. CTM has a three-dimensional porous network structure with good biocompatibility, swelling properties, and degradability and could release L-Meseome slowly. In vitro experiments showed that CTM could promote the proliferation of fibroblasts and the polarization of macrophages to the anti-inflammatory phenotype. For in vivo experiments, on the 21st day after surgery, the wound healing rates of the control and CTM were 83.026 ± 4.17% and 93.12 ± 2.16%, respectively; the epidermal maturation and dermal differentiation scores in CTM were approximately four times that of the control group, and the skin epidermal thickness of the CTM group was approximately 20 μm, which was closest to that of normal rats. CTM could significantly improve wound healing in diabetic rats by promoting anti-inflammation, angiogenesis, epidermal recovery, and dermal collagen deposition. In summary, the multifunctional collagen dressing CTM could significantly promote the healing of diabetic skin wounds, which provides a new strategy for diabetic wound healing in the clinic.

Risk Factors for Non-Healing Wounds-A Single-Centre Study

Background: Chronic wounds present a significant clinical, social, and economic challenge. This study aimed to objectify the risk factors of healing outcomes and the duration of chronic wounds from various etiologies. Methods: Patients treated for non-healing wounds at the surgical outpatient clinic of the Olomouc Military Hospital were involved. Data from patients treated between 8/2021 and 9/2023 were selected. Patients were mostly treated as outpatients, with microbiological follow-up indicated in cases of advanced signs of inflammation. Results: There were 149 patients who met our selection criteria (the mean age was 64.4 years). Predominant causes of wounds involved diabetes (30.9%), post-trauma (25.5%), pressure ulcers (14.8%), surgical site infections (14.8%), and vascular ulcers (14.1%). Patient outcomes included wound resolution in 77.2% of patients (with a mean healing time of 110.9 days), amputation in 14.1%, and wound-related death in 8.7% of patients. Non-healing cases (amputation/death) were predicted by several local factors including an initial depth greater than 1 cm, wound secretion, inflammatory base, and a maximum wound size. Systemic factors included most strongly clinically manifested atherosclerosis and its risk factors. Of the 110 swabs performed, 103 identified at least 1 bacterial genus. The dominant risk factor for a prolonged healing duration was bacterial infection. Wounds contaminated by Proteus or Pseudomonas had prolonged healing times of 87 days (p = 0.02) and 72 days (p = 0.045), respectively. Conclusions: The early identification of local and systemic risk factors contributes to the successful resolution of chronic wounds and a reduced duration of healing.

Consensus on the treatment of second-degree burn wounds (2024 edition)

Second-degree burns are the most common type of burn in clinical practice and hard to manage. Their treatment requires not only a consideration of the different outcomes that may arise from the dressing changes or surgical therapies themselves but also an evaluation of factors such as the burn site, patient age and burn area. Meanwhile, special attention should be given to the fact that there is no unified standard or specification for the diagnosis, classification, surgical procedure, and infection diagnosis and grading of second-degree burn wounds. This not only poses great challenges to the formulation of clinical treatment plans but also significantly affects the consistency of clinical studies. Moreover, currently, there are relatively few guidelines or expert consensus for the management of second-degree burn wounds, and no comprehensive and systematic guidelines or specifications for the treatment of second-degree burns have been formed. Therefore, we developed the Consensus on the Treatment of Second-Degree Burn Wounds (2024 edition), based on evidence-based medicine and expert opinion. This consensus provides specific recommendations on prehospital first aid, nonsurgical treatment, surgical treatment and infection treatment for second-degree burns. The current consensus generated a total of 58 recommendations, aiming to form a standardized clinical treatment plan.

Evaluation of antimicrobial photodynamic action of a pluronic and pectin based film loaded with methylene blue against methicillin resistantStaphylococcus aureus

Antimicrobial wound dressings play a crucial role in treatment of wound infections. However, existing commercial options fall short due to antibiotic resistance and the limited spectrum of activity of newly emerging antimicrobials against bacteria that are frequently encountered in wound infections. Antimicrobial photodynamic therapy (aPDT) is very promising alternative therapeutic approach against antibiotic resistant microbes such as methicillin resistantStaphylococcus aureus (MRSA). However, delivery of the photosensitizer (PS) homogeneously to the wound site is a challenge. Though polymeric wound dressings based on synthetic and biopolymers are being explored for aPDT, there is paucity of data regarding theirin vivoefficacy. Moreover, there are no studies on use of PS loaded, pluoronic (PL) and pectin (PC) based films for aPDT. We report development of a polymeric film for potential use in aPDT. The film was prepared using PL and PC via solvent casting approach and impregnated with methylene blue (MB) for photodynamic inactivation of MRSAin vitroandin vivo. Atomic force microscopic imaging of the films yielded vivid pictures of surface topography, with rough surfaces, pores, and furrows. The PL:PC ratio (2:3) was optimized that would result in an intact film but exhibit rapid release of MB in time scale suitable for aPDT. The film showed good antibacterial activity against planktonic suspension, biofilm of MRSA upon exposure to red light. Investigations on MRSA infected excisional wounds of mice reveal that topical application of MB loaded film for 30 min followed by red light exposure for 5 min (fluence; ∼30 J cm-2) or 10 min (fluence; ∼60 J cm-2) reduces ∼80% or ∼92% of bioburden, respectively. Importantly, the film elicits no significant cytotoxicity against keratinocytes and human adipose derived mesenchymal stem cells. Taken together, our data demonstrate that PS-loaded PL-PC based films are a promising new tool for treatment of MRSA infected wounds.

Radical Scavenging, Hemocompatibility, and Antibacterial Activity against MDR Acinetobacter baumannii in Alginate-Based Aerogels Containing Lipoic Acid-Capped Silver Nanoparticles

Retaining the hemocompatibility, supporting cell growth, and exhibiting anti-inflammatory and antioxidant properties, while having antimicrobial activity, particularly against multidrug-resistant bacteria (MDR), remain a challenge when designing aerogels for biomedical applications. Here, we report that our synthesized alginate-based aerogels containing either 7.5 or 11.25 μg of lipoic acid-capped silver nanoparticles (AgNPs) showed improved hemocompatibility properties while retaining their antimicrobial effect against MDR Acinetobacter baumannii and the reference strain Escherichia coli, relative to a commercial dressing and polymyxin B, used as a reference. The differences in terms of the microstructure and nature of the silver, used as the bioactive agent, between our synthesized aerogels and the commercial dressing used as a reference allowed us to improve several biological properties in our aerogels with respect to the reference commercial material. Our aerogels showed significantly higher antioxidant capacity, in terms of nmol of Trolox equivalent antioxidant capacity per mg of aerogel, than the commercial dressing. All our synthesized aerogels showed anti-inflammatory activity, expressed as nmol of indomethacin equivalent anti-inflammatory activity per mg of aerogel, while this property was not found in the commercial dressing material. Finally, our aerogels were highly hemocompatible (less than 1% hemolysis ratio); however, the commercial material showed a 20% hemolysis rate. Therefore, our alginate-based aerogels with lipoic acid-capped AgNPs hold promise for biomedical applications.

Impact of moist wound dressing on wound healing time: A meta-analysis

Among the assortment of available dressings aimed at promoting wound healing, moist dressings have gained significant popularity because of their ability to create an optimal environment for wound recovery. This meta-analysis seeks to compare the effects of moist dressing versus gauze dressing on wound healing time. A comprehensive literature search was conducted, encompassing publications up until April 1, 2023, across multiple databases including PubMed, Web of Science, China National Knowledge Infrastructure (CNKI), and Cochrane Library. Stringent criteria were used to determine study inclusion and evaluate methodological quality. Statistical analyses were performed utilizing Stata 17.0. A total of 13 articles, encompassing 866 participants, were included in the analysis. The findings indicate that moist dressing surpasses gauze dressing in terms of wound healing time (standard mean difference [SMD] -2.50, 95% confidence interval [CI] -3.35 to -1.66, p < 0.01; I2  = 97.24%), wound site infection rate (odds ratio [OR] 0.30, 95% CI 0.17 to 0.54, p < 0.01; I2  = 39.91%), dressing change times (SMD -3.65, 95% CI -5.34 to -1.97, p < 0.01; I2  = 96.48%), and cost (SMD -2.66, 95% CI -4.24 to -1.09, p < 0.01; I2  = 94.90%). Subgroup analyses revealed possible variations in wound healing time based on wound types and regions. This study underscores the significant advantages associated with the use of moist dressings, including expedited wound healing, reduced infection rates, decreased frequency of dressing changes, and lower overall treatment costs.

Novel ultra-stretchable and self-healing crosslinked poly (ethylene oxide)-cationic guar gum hydrogel

Hydrogels are three-dimensional structures with specific features that render them useful for biomedical applications, such as tissue engineering scaffolds, drug delivery systems, and wound dressings. In recent years, there has been a significant increase in the search for improved mechanical properties of hydrogels derived from natural products to extend their applications in various fields, and there are different methods to obtain strengthened hydrogels. Cationic guar gum has physicochemical properties that allow it to interact with other polymers and generate hydrogels. This study aimed to develop an ultra-stretchable and self-healing hydrogel, evaluating the influence of adding PolyOX [poly(ethylene oxide)] on the mechanical properties and the interaction with cationic guar gum for potential tissue engineering applications. We found that variations in PolyOX concentrations and pH changes influenced the mechanical properties of cationic guar gum hydrogels. After optimization experiments, we obtained a novel hydrogel, which was semi-crystalline, highly stretchable, and with an extensibility area of approximately 400 cm2, representing a 33-fold increase compared to the hydrogel before being extended. Moreover, the hydrogel presented a recovery of 96.8% after the self-healing process and a viscosity of 153,347 ± 4,662 cP. Therefore, this novel hydrogel exhibited optimal mechanical and chemical properties and could be suitable for a broad range of applications in different fields, such as tissue engineering, drug delivery, or food storage.

Electrospun Fibers Loaded with Pirfenidone: An Innovative Approach for Scar Modulation in Complex Wounds

Hypertrophic scars (HTSs) are pathological structures resulting from chronic inflammation during the wound healing process, particularly in complex injuries like burns. The aim of this work is to propose Biofiber PF (biodegradable fiber loaded with Pirfenidone 1.5 w/w), an electrospun advanced dressing, as a solution for HTSs treatment in complex wounds. Biofiber has a 3-day antifibrotic action to modulate the fibrotic process and enhance physiological healing. Its electrospun structure consists of regular well-interconnected Poly-L-lactide-co-poly-ε-caprolactone (PLA-PCL) fibers (size 2.83 ± 0.46 µm) loaded with Pirfenidone (PF, 1.5% w/w), an antifibrotic agent. The textured matrix promotes the exudate balance through mild hydrophobic wettability behavior (109.3 ± 2.3°), and an appropriate equilibrium between the absorbency % (610.2 ± 171.54%) and the moisture vapor transmission rate (0.027 ± 0.036 g/min). Through its finer mechanical properties, Biofiber PF is conformable to the wound area, promoting movement and tissue oxygenation. These features also enhance the excellent elongation (>500%) and tenacity, both in dry and wet conditions. The ancillary antifibrotic action of PF on hypertrophic scar fibroblast (HSF) for 3 days downregulates the cell proliferation over time and modulates the gene expression of transforming growth factor β1 (TGF-β1) and α-smooth muscle actin (α-SMA) at 48-72 h. After 6 days of treatment, a decrement of α-SMA protein levels was detected, proving the potential of biofiber as a valid therapeutic treatment for HTSs in an established wound healing process.

A polyphenol and ε-polylysine functionalized bacterial cellulose/PVA multifunctional hydrogel for wound healing

Hydrogels for wound dressings have recently attracted considerable attention in the field of biomedical materials. Developing hydrogel dressings with multiple functions, including good antibacterial, mechanical and adhesive properties, to enhance wound regeneration is significant for clinical applications. To this end, a novel hydrogel wound dressing (PB-EPL/TA@BC) was developed, which was prepared by incorporating bacterial cellulose (BC) modified with tannic acid and ε-polylysine (EPL) into a PVA and borax matrix through a simple method without introducing any other chemical reagents. The hydrogel exhibited good adhesion (8.8 ± 0.2 kPa) to porcine skin, and the mechanical properties were significantly improved after adding BC. Meanwhile, it showed good inhibition against Escherichia coli, Staphylococcus aureus and Methicillin-resistant Staphylococcus aureus (84.1 ± 2.6 %, 86.0 ± 2.3 % and 80.7 ± 4.5 %) in vitro and Methicillin-resistant Staphylococcus aureus (MRSA) in vivo without the use of antibiotics, ensuring that the process of wound repair with a sterile environment. The hydrogel also presented good cytocompatibility and biocompatibility and could achieve hemostasis within 120 s. The in vivo experiments indicated that hydrogel could not only instantly complete hemostasis of the injured liver models but also obviously promote wound healing in a full-thickness skin. Furthermore, the hydrogel accelerated wound healing process by reducing inflammation promoting collagen deposition compared with commercial Tegaderm™ films. Therefore, the hydrogel is a promising high-end dressing material for wound hemostasis and repair for to enhance the wound healing.

Current status and progress in research on dressing management for diabetic foot ulcer

Diabetic foot ulcer (DFU) is a major complication of diabetes and is associated with a high risk of lower limb amputation and mortality. During their lifetime, 19%-34% of patients with diabetes can develop DFU. It is estimated that 61% of DFU become infected and 15% of those with DFU require amputation. Furthermore, developing a DFU increases the risk of mortality by 50%-68% at 5 years, higher than some cancers. Current standard management of DFU includes surgical debridement, the use of topical dressings and wound decompression, vascular assessment, and glycemic control. Among these methods, local treatment with dressings builds a protective physical barrier, maintains a moist environment, and drains the exudate from DFU wounds. This review summarizes the development, pathophysiology, and healing mechanisms of DFU. The latest research progress and the main application of dressings in laboratory and clinical stage are also summarized. The dressings discussed in this review include traditional dressings (gauze, oil yarn, traditional Chinese medicine, and others), basic dressings (hydrogel, hydrocolloid, sponge, foam, film agents, and others), bacteriostatic dressings, composite dressings (collagen, nanomaterials, chitosan dressings, and others), bioactive dressings (scaffold dressings with stem cells, decellularized wound matrix, autologous platelet enrichment plasma, and others), and dressings that use modern technology (3D bioprinting, photothermal effects, bioelectric dressings, microneedle dressings, smart bandages, orthopedic prosthetics and regenerative medicine). The dressing management challenges and limitations are also summarized. The purpose of this review is to help readers understand the pathogenesis and healing mechanism of DFU, help physicians select dressings correctly, provide an updated overview of the potential of biomaterials and devices and their application in DFU management, and provide ideas for further exploration and development of dressings. Proper use of dressings can promote DFU healing, reduce the cost of treating DFU, and reduce patient pain.

Mechanism of wound repair in diabetic rats using nanosilver-free alginate dressing

OBJECTIVE

Nanosilver-alginate dressing can effectively promote the healing of diabetic wounds in rats. However, due to the potential toxicity of nanosilver, its widespread application in hard-to-heal wound healing is limited. In the present study, the role and potential mechanism of nanosilver-free alginate gel (NSFAG) in the healing process of diabetic wounds were explored.

METHOD

A diabetic rat skin wound model was established, and wounds were treated with saline (NC group), nanosilver gel (NSG group) or nanosilver-free alginate gel (NSFAG group) for seven consecutive days.

RESULTS

NSFAG significantly promoted wound healing and increased the content of protein and hydroxyproline in granulation tissues, and was superior to NSG (p<0.05). Immunohistochemical analyses revealed that the skin wound tissue structure of the NSFAG group was intact, and the number of skin appendages in the dermis layer was significantly higher compared with the NC group and the NSG group (p<0.05). Western blot analysis found that the protein expression of the epidermal stem cell marker molecules CK19 and CK14 as well the proliferation marker of keratinocytes Ki67 in the NSFAG group was significantly higher compared with the NC group or NSG group (p<0.05). Additionally, the proliferation marker of keratinocytes Ki67 in the NSFAG group was significantly higher compared with the NC or NSG group (p<0.05). Immunofluorescence staining analyses indicated that the CK19- and CK14-positive cells were mainly distributed around the epidermis and the newly formed appendages in the NSFAG group, and this result was not observed in the NC or NSG groups.

CONCLUSION

The present findings demonstrate that NSFAG can effectively accelerate wound healing in diabetic rats by promoting epidermal stem cell proliferation and differentiation into skin cells, as well as formation of granulation tissue, suggesting that it can be a potential dressing for diabetic wounds.

Exosome/metformin-loaded self-healing conductive hydrogel rescues microvascular dysfunction and promotes chronic diabetic wound healing by inhibiting mitochondrial fission

Chronic diabetic wounds remain a globally recognized clinical challenge. They occur due to high concentrations of reactive oxygen species and vascular function disorders. A promising strategy for diabetic wound healing is the delivery of exosomes, comprising bioactive dressings. Metformin activates the vascular endothelial growth factor pathway, thereby improving angiogenesis in hyperglycemic states. However, multifunctional hydrogels loaded with drugs and bioactive substances synergistically promote wound repair has been rarely reported, and the mechanism of their combinatorial effect of exosome and metformin in wound healing remains unclear. Here, we engineered dual-loaded hydrogels possessing tissue adhesive, antioxidant, self-healing and electrical conductivity properties, wherein 4-armed SH-PEG cross-links with Ag⁺, which minimizes damage to the loaded goods and investigated their mechanism of promotion effect for wound repair. Multiwalled carbon nanotubes exhibiting good conductivity were also incorporated into the hydrogels to generate hydrogen bonds with the thiol group, creating a stable three-dimensional structure for exosome and metformin loading. The diabetic wound model of the present study suggests that the PEG/Ag/CNT-M + E hydrogel promotes wound healing by triggering cell proliferation and angiogenesis and relieving peritraumatic inflammation and vascular injury. The mechanism of the dual-loaded hydrogel involves reducing the level of reactive oxygen species by interfering with mitochondrial fission, thereby protecting F-actin homeostasis and alleviating microvascular dysfunction. Hence, we propose a drug-bioactive substance combination therapy and provide a potential mechanism for developing vascular function-associated strategies for treating chronic diabetic wounds.

Films for Wound Healing Fabricated Using a Solvent Casting Technique

Wound healing is a complex process that involves restoring the structure of damaged tissues through four phases: hemostasis, inflammation, proliferation, and remodeling. Wound dressings are the most common treatment used to cover wounds, reduce infection risk and the loss of physiological fluids, and enhance wound healing. Despite there being several types of wound dressings based on different materials and fabricated through various techniques, polymeric films have been widely employed due to their biocompatibility and low immunogenicity. Furthermore, they are non-invasive, easy to apply, allow gas exchange, and can be transparent. Among different methods for designing polymeric films, solvent casting represents a reliable, preferable, and highly used technique due to its easygoing and relatively low-cost procedure compared to sophisticated methods such as spin coating, microfluidic spinning, or 3D printing. Therefore, this review focuses on the polymeric dressings obtained using this technique, emphasizing the critical manufacturing factors related to pharmaceuticals, specifically discussing the formulation variables necessary to create wound dressings that demonstrate effective performance.

Hollow Particles Obtained by Prilling and Supercritical Drying as a Potential Conformable Dressing for Chronic Wounds

The production of aerogels for different applications has been widely known, but the use of polysaccharide-based aerogels for pharmaceutical applications, specifically as drug carriers for wound healing, is being recently explored. The main focus of this work is the production and characterization of drug-loaded aerogel capsules through prilling in tandem with supercritical extraction. In particular, drug-loaded particles were produced by a recently developed inverse gelation method through prilling in a coaxial configuration. Particles were loaded with ketoprofen lysinate, which was used as a model drug. The core-shell particles manufactured by prilling were subjected to a supercritical drying process with CO₂ that led to capsules formed by a wide hollow cavity and a tunable thin aerogel layer (40 μm) made of alginate, which presented good textural properties in terms of porosity (89.9% and 95.3%) and a surface area up to 417.0 m²/g. Such properties allowed the hollow aerogel particles to absorb a high amount of wound fluid moving very quickly (less than 30 s) into a conformable hydrogel in the wound cavity, prolonging drug release (till 72 h) due to the in situ formed hydrogel that acted as a barrier to drug diffusion.

Physical Properties and pH Environment of Foam Dressing Containing Eclipta prostrata Leaf Extract and Gelatin

Eclipta prostrata (E. prostrata) has several biological activities, including antibacterial and anti-inflammatory activities, that improve wound healing. It is well known that physical properties and pH environment are crucial considerations when developing wound dressings containing medicinal plant extracts in order to create an appropriate environment for wound healing. In this study, we prepared a foam dressing containing E. prostrata leaf extract and gelatin. Chemical composition was verified using Fourier-transform infrared spectroscopy (FTIR) and pore structure was obtained using scanning electron microscopy (SEM). The physical properties of the dressing, including absorption and dehydration properties, were also evaluated. The chemical properties were measured to determine the pH environment after the dressing was suspended in water. The results revealed that the E. prostrata dressings had a pore structure with an appropriate pore size (313.25 ± 76.51 µm and 383.26 ± 64.45 µm for the E. prostrata A and E. prostrata B dressings, respectively). The E. prostrata B dressings showed a higher percentage of weight increase in the first hour and a faster dehydration rate in the first 4 h. Furthermore, the E. prostrata dressings had a slightly acidic environment (5.28 ± 0.02 and 5.38 ± 0.02 for the E. prostrata A and E. prostrata B dressings at 48 h, respectively).

Antimicrobial Nano-Zinc Oxide Biocomposites for Wound Healing Applications: A Review

Chronic wounds are a major concern for global health, affecting millions of individuals worldwide. As their occurrence is correlated with age and age-related comorbidities, their incidence in the population is set to increase in the forthcoming years. This burden is further worsened by the rise of antimicrobial resistance (AMR), which causes wound infections that are increasingly hard to treat with current antibiotics. Antimicrobial bionanocomposites are an emerging class of materials that combine the biocompatibility and tissue-mimicking properties of biomacromolecules with the antimicrobial activity of metal or metal oxide nanoparticles. Among these nanostructured agents, zinc oxide (ZnO) is one of the most promising for its microbicidal effects and its anti-inflammatory properties, and as a source of essential zinc ions. This review analyses the most recent developments in the field of nano-ZnO–bionanocomposite (nZnO-BNC) materials—mainly in the form of films, but also hydrogel or electrospun bandages—from the different preparation techniques to their properties and antibacterial and wound-healing performances. The effect of nanostructured ZnO on the mechanical, water and gas barrier, swelling, optical, thermal, water affinity, and drug-release properties are examined and linked to the preparation methods. Antimicrobial assays over a wide range of bacterial strains are extensively surveyed, and wound-healing studies are finally considered to provide a comprehensive assessment framework. While early results are promising, a systematic and standardised testing procedure for the comparison of antibacterial properties is still lacking, partly because of a not-yet fully understood antimicrobial mechanism. This work, therefore, allowed, on one hand, the determination of the best strategies for the design, engineering, and application of n-ZnO-BNC, and, on the other hand, the identification of the current challenges and opportunities for future research.

Nagging Pain and Foot Ulcers Can be Treated into Remission

Lower extremity ulcerations are very common in patients with diabetes. These wounds lead to amputation in a surprisingly large percentage of patients with diabetes. The mortality rate following amputation in a patient with diabetes is alarmingly high. Preventive treatment is pivotal to avoid the numerous complications associated with diabetic ulcerations. However, at the onset of ulceration, early treatment under the supervision and guidance of a specialist can result in remission. Diabetic peripheral neuropathy is also a life-altering and debilitating disease. Although some patients experience numbness, some experience pain that can be sharp, shooting, and tingling. Although treatment is challenging and often requires medication, newer modalities, such as stimulation and physical therapy, have shown promise in reversing the devastating effects of peripheral neuropathy.

Expanding the Treatment Team

The optimal systemic sclerosis (SSc) care plan includes an occupational therapist and physical therapist as well as wound care experts and a registered dietitian if indicated. Screening instruments for functional and work disability, hand and mouth limitations, malnutrition, and dietary intake can identify the need for ancillary support services. Telemedicine can assist in developing effective ancillary treatment plans. Reimbursement for services may limit access for patients with SSc to expand their care team but a focus on prevention rather than management of damage is recognized as an important unmet need in SSc. In this review, the role of a comprehensive care team for SSc is discussed.

Bibliometric analysis of the use of calcium alginate for wound dressing applications: A review

Wounds can cause many disorders and affect the quality of health, so it is necessary to develop wound dressings that have a role in accelerating the healing process. Wound dressings have evolved over time, and today there are many types of wound dressings that can suit the type of wound the patient has. This review discusses the development, types, and research directions of wound dressings from calcium alginate (CaAlg), using bibliometric analysis with time intervals from 1982 to 2021. It was found that, in the late 1990s, research related to this matter began to increase. United Kingdom, United States, China, Japan, and Italy are the five most influential countries. And from the results of the keyword analysis, it was found that, in addition to studying the general properties of wound dressings, currently there are many developments related to the structure of the material as well as the effect of adding drugs to wound dressings, so that the current study also displays various characterizations.

Biomedical materials for wound dressing: recent advances and applications

Wound healing is vital to maintain the physiological functions of the skin. The most common treatment is the use of a dressing to cover the wound and reduce infection risk and the rate of secondary injuries. Modern wound dressings have been the top priority choice for healing various types of wounds owing to their outstanding biocompatibility and biodegradability. In addition, they also maintain temperature and a moist environment, aid in pain relief, and improve hypoxic environments to stimulate wound healing. Due to the different types of wounds, as well as the variety of advanced wound dressing products, this review will provide information on the clinical characteristics of the wound, the properties of common modern dressings, and the in vitro, in vivo as well as the clinical trials on their effectiveness. The most popular types commonly used in producing modern dressings are hydrogels, hydrocolloids, alginates, foams, and films. In addition, the review also presents the polymer materials for dressing applications as well as the trend of developing these current modern dressings to maximize their function and create ideal dressings. The last is the discussion about dressing selection in wound treatment and an estimate of the current development tendency of new materials for wound healing dressings.

In Vitro and In Vivo Characterization Methods for Evaluation of Modern Wound Dressings

Chronic wound management represents a major challenge in the healthcare sector owing to its delayed wound-healing process progression and huge financial burden. In this regard, wound dressings provide an appropriate platform for facilitating wound healing for several decades. However, adherent traditional wound dressings do not provide effective wound healing for highly exudating chronic wounds and need the development of newer and innovative wound dressings to facilitate accelerated wound healing. In addition, these dressings need frequent changing, resulting in more pain and discomfort. In order to overcome these issues, a wide range of affordable and innovative modern wound dressings have been developed and explored recently to accelerate and improve the wound healing process. However, a comprehensive understanding of various in vitro and in vivo characterization methods being utilized for the evaluation of different modern wound dressings is lacking. In this context, an overview of modern dressings and their complete in vitro and in vivo characterization methods for wound healing assessment is provided in this review. Herein, various emerging modern wound dressings with advantages and challenges have also been reviewed. Furthermore, different in vitro wound healing assays and in vivo wound models being utilized for the evaluation of wound healing progression and wound healing rate using wound dressings are discussed in detail. Finally, a summary of modern wound dressings with challenges and the future outlook is highlighted.

Antibacterial smart hydrogels: New hope for infectious wound management

Millions of people die annually due to uncured wound infections. Healthcare systems incur high costs to treat wound infections. Tt is predicted to become more challenging due to the rise of multidrug-resistant conditions. During the last decades, smart antibacterial hydrogels could attract attention as a promising solution, especially for skin wound infections. These antibacterial hydrogels are termed 'smart' due to their response to specific physical and chemical environmental stimuli. To deliver different drugs to particular sites in a controlled manner, various types of crosslinking strategies are used in the manufacturing process. Smart hydrogels are designed to provide antimicrobial agents to the infected sites or are built from polymers with inherent disinfectant properties. This paper aims to critically review recent pre-clinical and clinical advances in using smart hydrogels against skin wound infections and propose the next best thing for future trends. For this purpose, an introduction to skin wound healing and disease is presented and intelligent hydrogels responding to different stimuli are introduced. Finally, the most promising investigations are discussed in their related sections. These studies can pave the way for producing new biomaterials with clinical applications.

Optimizing Biodegradable Starch-Based Composite Films Formulation for Wound-Dressing Applications

This paper utilizes response surface methodology (RSM) design-based analyses to optimize starch-based wound dressings that were characterized based on weight loss (WL%), swelling index (SI%), and mechanical strength (TS). The wound-dressing materials were prepared by employing a modified casting method, using various concentrations of starch (0.5-2 w/w%), polyvinyl alcohol (PVA) (0.5-2 weight%), citric acid (1.5-4 weight%), and glycerol (1.5-4 weight%) to yield wound-dressing films with appropriate combinations of in vitro degradation, swelling index, and tensile strength. As a result of the response surface method-based analysis, the swelling index, in vitro degradation, and tensile strength were linearly related to variations in the formulation of organic components. Based on our experimental investigations, the optimized film (formulation: 1 weight% PVA, 2 weight% starch, 1.5 weight% citric acid, and 1.5 weight% glycerol) exhibited an outstanding swelling index (343.52%), suitable in vitro degradation (53.22%), and excellent tensile strength (8.82 MPa). The response surface plots for the dependent variables, swelling index (SI%), weight loss (WL%), and mechanical strength (TS), showed that in all dual relations, the PVA-starch combination significantly affected all dependent variables; however, the PVA-citric acid interaction showed the most excellent effect on the swelling index. As a result, every component of the resulting film had a lesser amount of all ingredients to achieve better properties at a lower material cost. Starch-based/PVA films have been identified in this paper as optimal and more affordable wound-dressing films.

The efficacy and safety of platelet-rich plasma in the tendon-exposed wounds: a preliminary study

Objective

Currently, among wounds with large skin tissue defects caused by various reasons, the treatment of refractory wounds is still a major clinical problem. This study is aimed to preliminarily assess the therapeutic potentials of platelet-rich plasma (PRP) in refractory wounds with exposed tendons, as well as corresponding efficacy and safety.

Methods

A total of 12 patients (5 males and 7 females) with refractory wounds and exposed tendons who were admitted to our hospital from June 2018 to December 2020 were included in this study. After the preparation of PRP, the included patients underwent the PRP injection after the debridement of wounds, and the efficacy and prognosis were assessed by the same group of senior surgeons.

Results

The average age of included patients was 42.7 ± 12.9 years, and the causes of injury included traffic accidents (3 cases), contusion (2 cases), burns (2 cases), diabetes complications (4 cases), and melanoma complications (1 cases). The average healing time was 23.0 ± 5.0 days, and the mean size of the wound was 3.1 × 5.1 cm². During the whole treatment process, Vancouver Scar Scale (VSS) decreased from 7.4 ± 1.6 before PRP treatment to 3.6 ± 0.9 after treatment (P < 0.001), Manchester Scar Scale (MSS) decreased from 12.3 ± 4.5 before PRP treatment to 5.4 ± 1.2 after treatment (P < 0.001), and no redness and swelling were observed around wounds, the size and degree of wounds gradually reduced, the coverage rate of granulation tissue was acceptable, overall quality of scar was relatively good, skin sensitivity around wounds was normal, there was no local wounds secretion, and postoperative patient's satisfaction was relatively good during follow-up.

Conclusions

Our study has preliminarily indicated that PRP can promote the wounds healing, reduce the inflammation around wounds, and improve the granulation tissue and angiogenesis, thereby effectively polishing up the safety and efficacy.

Electrospinning of botanicals for skin wound healing

Being the first barrier between the human body and external environments, our skin is highly vulnerable to injuries. As one of the conventional therapies, botanicals prepared in different topical formulations have been applied as medical care for centuries. With the current increase of clinical requirements, applications of botanicals are heading towards nanotechnologies, typically fused with electrospinning that forms nanofibrous membranes suitable for skin wound healing. In this review, we first introduced the main process of wound healing, and then presented botanicals integrated into electrospun matrices as either loaded drugs, or carriers, or membrane coatings. In addition, by addressing functional features of individual botanicals in the healing of injured skin, we further discussed the bioactivity of botanical electrospun membranes in relevant to the medical issues solved in the process of wound healing. As achieved by pioneer studies, due to infrequent adverse effects and the diversity in resources of natural plants, the development of electrospun products based on botanicals is gaining greater attention. However, investigations in this field have mainly focused on different methodologies used in the preparation of nanofibrous membranes containing botanicals, their translation into clinical practices remains unaddressed. Accordingly, we propose that potential clinical applications of botanical electrospun membranes require not only the further expansion and understanding of botanicals, but also an establishment of standard criteria for the evaluation of wound healing and evolutions of technologies to support the large-scale manufacturing industry.

A Randomized Controlled Trial of Three Advanced Wound Dressings in Split-Thickness Skin Grafting Donor Sites-A Personalized Approach?

Background: Split-thickness skin grafting (STSG) is a frequently used reconstructive technique, and its donor site represents a standardized clinical model to evaluate wound dressings. We compared hydroactive nanocellulose-based, silver-impregnated and ibuprofen-containing foam wound dressings. Methods: A total of 46 patients scheduled for elective surgery were evaluated on the STSG donor site for wound healing (time-to-healing, Hollander Wound Evaluation Scale), pain level (Visual Analogue Scale), and handling (ease of use), as well as scar quality (Patient Scar Assessment Scale, Vancouver Scar Scale) after 3, 6 and 12 months. Results: Almost all dressings compared equally well. We observed statistically relevant differences for pain level favoring the ibuprofen-containing dressing (p = 0.002, ΔAIC = 8.1), and user friendliness in favor of nanocellulose (dressing removal: p = 0.037, ΔAIC = 2.59; application on patient: p = 0.042, ΔAIC = 2.33; wound adhesion: p = 0.017, ΔAIC = 4.16; sensation on skin: p = 0.027, ΔAIC = 3.21). We did not observe any differences for wound healing across all groups. Treatment with hydroactive nanocellulose and the ibuprofen-containing foam revealed statistically relevant better scar appearances as compared to the silver wound dressing (p < 0.001, ΔAIC = 14.77). Conclusion: All wound dressings performed equally well, with the detected statistical differences hinting future directions of clinical relevance. These include the reserved use of silver containing dressings for contaminated or close to contaminated wounds, and the facilitated clinical application of the nanocellulose dressing, which was the only suitable candidate in this series to be impregnated with a range of additional therapeutic agents (e.g., disinfectants and pain-modulating drugs). Personalized donor site management with the tested dressings can meet individual clinical requirements after STSG and improve management strategies and ultimately patient outcomes.

Rapid In Situ Deposition of Iron-Chelated Polydopamine Coating on the Polyacrylamide Hydrogel Dressings for Combined Photothermal and Chemodynamic Therapy of Skin Wound Infection

Pathogenic bacterial infections of skin wounds have caused a significant threat to clinical treatment and human life safety. Here, we develop a bactericidal hydrogel dressing consisting of a polyacrylamide (PAM) hydrogel framework with in situ surface-deposition of iron-dopped polydopamine (FePDA). The prepared hydrogel dressing (FePDA-PAM) has a compact surface, good tensile strength, and excellent elastic recovery ability. The introduction of Fe3+ ions improve the photothermal therapy (PTT) efficiency of the PDA and endow the hydrogel dressing with chemodynamic therapy (CDT) properties. In vitro experiments show that the antibacterial effect of FePDA-PAM hydrogel on Staphylococcus aureus reach nearly 100% under the combined action of H2O2 and 808 nm near-infrared (NIR) laser, indicating an excellent combined antibacterial property of PTT and CDT. Furthermore, the FePDA-PAM + H2O2 + NIR treatment group in the in vivo antibacterial experiments displays lowest relative wound area and optimal wound healing within 5 days of treatment, thereby indicating the intensive skin wound disinfection. To summarize, the FePDA-PAM hydrogel has simple preparation and good biosafety. It may serve as a potential wound dressing for the combined PTT/CDT dual-mode antibacterial therapy.