1
|
Diao B, Jiang F, Ye H, Wang R, Li H, Zhang H, Joo SW, Cong C, Kim SH, Li X. Interfacial modulation strategy using poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulfonate) (PEDOT:PSS) and ultrathin two-dimensional metal-organic framework nanosheets for wearable supercapacitors: Solution engineering. J Colloid Interface Sci 2025; 677:862-871. [PMID: 39173518 DOI: 10.1016/j.jcis.2024.08.123] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/15/2024] [Revised: 08/11/2024] [Accepted: 08/15/2024] [Indexed: 08/24/2024]
Abstract
Two-dimensional metal-organic frameworks (2D MOFs) hold great promise as electrochemically active materials. However, their application in MOF nanocomposite electrodes in solution engineering is limited by structural self-stacking and imperfect conductive pathways. In this study, we used meso-tetra(4-carboxyphenyl) porphine (TCPP) with off-domain π-bonds to reconstitute Zn-TCPP (ZMOF) and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) through an interfacial modulation strategy involving electrostatic coupling and hydrogen bonding, creating a conductive composite with a nanosheet structure. The negatively charged PSS and ZMOF formed a three-dimensional interconnected conductive network with excellent interfaces. The positively charged PEDOT, fine tuned with the lamellar structure, established strong π-π stacking interactions between the porphyrin and thiophene rings. ZMOF also induced changes in the PEDOT chain structure, weakening PSS entanglement and enhancing charge-transport properties. The specific capacitance of the prepared supercapacitor was as high as 967.8 F g-1. Flexible supercapacitors produced on a large scale using dispensing printing technology exhibited an energy density of 1.85 μWh cm-2 and a power density of 7.08 μW cm-2. This interfacial modulation strategy also exhibited excellent wearable properties, with 96 % capacitance retention at a 180° bending angle and stable cycling performance. This study presented a significant advancement in the functionalization of 2D materials, highlighting their potential for device-grade capacitive architectures.
Collapse
Affiliation(s)
- Binxuan Diao
- College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China
| | - Fuhao Jiang
- College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China
| | - Heqing Ye
- School of Flexible Electronics (SoFE) and Henan Institute of Flexible Electronics (HIFE), Henan University, 379 Mingli Road, Zhengzhou 450046, China
| | - Rui Wang
- School of Mechanical Engineering, Yeungnam University, Gyeongsan 712-749, Republic of Korea
| | - Hongjiang Li
- College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China
| | - Haoran Zhang
- College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China
| | - Sang Woo Joo
- School of Mechanical Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea
| | - Chenhao Cong
- College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China; School of Chemical Engineering, Konkuk University, Seoul 05029, Republic of Korea.
| | - Se Hyun Kim
- School of Chemical Engineering, Konkuk University, Seoul 05029, Republic of Korea.
| | - Xinlin Li
- College of Mechanical and Electrical Engineering, Qingdao University, Qingdao 266071, China.
| |
Collapse
|
2
|
Wang X, Yang L, Liang H, Zhu C, Shi J, Wu J, Chen J, Tian W, Zhu Y, Wang H. Internal Space Modulation of Yolk-Shell FeSe 2@Carbon Anode with Peanut-Shaped Morphology Enabling Ultra-Stable and Fast Potassium-Ion Storage. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2406577. [PMID: 39246194 DOI: 10.1002/smll.202406577] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/01/2024] [Revised: 08/28/2024] [Indexed: 09/10/2024]
Abstract
The poor cycling stability and rate performance of transition metal selenides (TMSs) are caused by their intrinsic low conductivity and poor structural stability, which hinders their application in potassium-ion batteries (PIBs). To address this issue, encapsulating TMSs within carbon nanoshells is considered a viable strategy. However, due to the lack and uncontrollability of internal void space, this structure cannot effectively mitigate the volume expansion induced by large K+, resulting in unsatisfactory electrochemical performance. Herein, peanut-shaped FeSe2@carbon yolk-shell capsules are prepared by modulation of the internal space. The active FeSe2 is encapsulated within a robust carbon shell and an optimal void space is retained between them. The outer carbon shell promotes electronic conductivity and avoids FeSe2 aggregation, while the internal void mitigates volume expansion and effectively ensures the structural integrity of the electrode. Consequently, the FeSe2@carbon anode demonstrates exceptional rate performance (242 mAh g-1 at 10 A g-1) and long cycling stability (350 mAh g-1 after 500 cycles at 1 A g-1). Furthermore, the effect of internal space modulation on electrochemical properties is elucidated. Meanwhile, ex situ characterizations elucidate the K+ storage mechanism. This work provides effective guidance for the design and the internal space modulation of advanced TMSs yolk-shell structures.
Collapse
Affiliation(s)
- Xinyu Wang
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Lei Yang
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Huanyu Liang
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Chunliu Zhu
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Jing Shi
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Jingyi Wu
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Jingwei Chen
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Weiqian Tian
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Yue Zhu
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| | - Huanlei Wang
- School of Materials Science and Engineering, Ocean University of China, Qingdao, 266100, China
| |
Collapse
|
3
|
Wang L, Zhao S, Zhang X, Xu Y, An Y, Li C, Yi S, Liu C, Wang K, Sun X, Zhang H, Ma Y. In Situ Construction of Bimetallic Selenides Heterogeneous Interface on Oxidation-Stable Ti 3C 2T x MXene Toward Lithium Storage with Ultrafast Charge Transfer Kinetics. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2403078. [PMID: 39221641 DOI: 10.1002/smll.202403078] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/17/2024] [Revised: 08/09/2024] [Indexed: 09/04/2024]
Abstract
Ti3C2Tx (MXene) is widely acknowledged as an excellent substrate for constructing heterogeneous structures with transition metal chalcogenides (TMCs) for boosting the electrochemical performance of lithium-ion storage. However, conventional synthesis strategies inevitably lead to poor electrochemical charge transfer due to Ti3C2Tx-derived TiO2 at the heterogeneous interface between Ti3C2Tx and TMCs. Here, an innovative in situ selenization strategy is proposed to replace the originally generated TiO2 on Ti3C2Tx with metallic TiSe2 interphase, clearing the bottleneck of slow charge transfer barrier caused by MXene oxidation. The construction of bimetallic selenide formed by CoSe2 and TiSe2 generates intrinsic electric fields to guide the fast ion diffusion kinetics in a heterogeneous interface. Additionally, the CoSe2/TiSe2/Ti3C2Tx heterogeneous structure with enhanced structural stability and improved rate performance is confirmed by both experiments and theoretical calculations. The engineered heterogeneous structure exhibits an ultra-high pseudocapacitance contribution (73.1% at 0.1 mV s-1), rendering it well-suited to offset the kinetics differences between double-layer materials. The assembled lithium-ion capacitor based on CoSe2/TiSe2/Ti3C2Tx possesses a high energy density and an ultralong life span (89.5% after 10 000 times at 2 A g-1). This devised strategy provides a feasible solution for utilizing the performance advantages of MXene substrates in lithium storage with ultrafast charge transfer kinetics.
Collapse
Affiliation(s)
- Lei Wang
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
- China North Vehicle Research Institute, Beijing, 100072, China
| | - Shasha Zhao
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Xiong Zhang
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
- Shandong Key Laboratory of Advanced Electromagnetic Conversion Technology, Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan, Shandong, 250013, China
| | - Yanan Xu
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- Shandong Key Laboratory of Advanced Electromagnetic Conversion Technology, Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan, Shandong, 250013, China
| | - Yabin An
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
- Shandong Key Laboratory of Advanced Electromagnetic Conversion Technology, Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan, Shandong, 250013, China
| | - Chen Li
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- Shandong Key Laboratory of Advanced Electromagnetic Conversion Technology, Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan, Shandong, 250013, China
| | - Sha Yi
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- Shandong Key Laboratory of Advanced Electromagnetic Conversion Technology, Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan, Shandong, 250013, China
| | - Cong Liu
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Kai Wang
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
- Shandong Key Laboratory of Advanced Electromagnetic Conversion Technology, Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan, Shandong, 250013, China
| | - Xianzhong Sun
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- Shandong Key Laboratory of Advanced Electromagnetic Conversion Technology, Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan, Shandong, 250013, China
| | - Haitao Zhang
- Institute of Smart City and Intelligent Transportation, Southwest Jiaotong University, Chengdu, Sichuan, 610031, China
| | - Yanwei Ma
- Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
- Shandong Key Laboratory of Advanced Electromagnetic Conversion Technology, Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan, Shandong, 250013, China
- School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, Henan, 450001, China
| |
Collapse
|
4
|
Liu S, Hao Y, Sun M, Ren J, Li S, Wu Y, Sun Q, Hao Y. SnSe 2 Quantum Dots and Chlorhexidine Acetate Suppress Synergistically Non-radiative Recombination Loss for High Efficiency and Stability Perovskite Solar Cells. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2402385. [PMID: 38742952 DOI: 10.1002/smll.202402385] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/26/2024] [Revised: 05/05/2024] [Indexed: 05/16/2024]
Abstract
Non-radiative recombination losses limit the property of perovskite solar cells (PSCs). Here, a synergistic strategy of SnSe2QDs doping into SnO2 and chlorhexidine acetate (CA) coating on the surface of perovskite is proposed. The introduction of 2D SnSe2QDs reduces the oxygen vacancy defects and increases the carrier mobility of SnO2. The optimized SnO2 as a buried interface obviously improves the crystallization quality of perovskite. The CA containing abundant active sites of ─NH2/─NH─, ─C═N, CO, ─Cl groups passivate the defects on the surface and grain boundary of perovskite. The alkyl chain of CA also improves the hydrophobicity of perovskite. Moreover, the synergism of SnSe2QDs and CA releases the residual stress and regulates the energy level arrangement at the top and bottom interface of perovskite. Benefiting from these advantages, the bulk and interface non-radiative recombination loss is greatly suppressed and thereby increases the carrier transport and extraction in devices. As a result, the best power conversion efficiency (PCE) of 23.41% for rigid PSCs and the best PCE of 21.84% for flexible PSCs are reached. The rigid PSC maintains 89% of initial efficiency after storing nitrogen for 3100 h. The flexible PSCs retain 87% of the initial PCE after 5000 bending cycles at a bending radius of 5 mm.
Collapse
Affiliation(s)
- Shaoting Liu
- College of Physics, College of Electronic Information and Optical Engineering, Key Lab of Advanced Transducers and Intelligent Control System, Taiyuan University of Technology, Taiyuan, 030024, China
- Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, Taiyuan, 030000, China
| | - Yang Hao
- College of Physics, College of Electronic Information and Optical Engineering, Key Lab of Advanced Transducers and Intelligent Control System, Taiyuan University of Technology, Taiyuan, 030024, China
- Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, Taiyuan, 030000, China
| | - Mengxue Sun
- College of Physics, College of Electronic Information and Optical Engineering, Key Lab of Advanced Transducers and Intelligent Control System, Taiyuan University of Technology, Taiyuan, 030024, China
- Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, Taiyuan, 030000, China
| | - Jingkun Ren
- College of Physics, College of Electronic Information and Optical Engineering, Key Lab of Advanced Transducers and Intelligent Control System, Taiyuan University of Technology, Taiyuan, 030024, China
- Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, Taiyuan, 030000, China
| | - Shiqi Li
- College of Physics, College of Electronic Information and Optical Engineering, Key Lab of Advanced Transducers and Intelligent Control System, Taiyuan University of Technology, Taiyuan, 030024, China
- Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, Taiyuan, 030000, China
| | - Yukun Wu
- College of Physics, College of Electronic Information and Optical Engineering, Key Lab of Advanced Transducers and Intelligent Control System, Taiyuan University of Technology, Taiyuan, 030024, China
- Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, Taiyuan, 030000, China
| | - Qinjun Sun
- College of Physics, College of Electronic Information and Optical Engineering, Key Lab of Advanced Transducers and Intelligent Control System, Taiyuan University of Technology, Taiyuan, 030024, China
- Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, Taiyuan, 030000, China
| | - Yuying Hao
- College of Physics, College of Electronic Information and Optical Engineering, Key Lab of Advanced Transducers and Intelligent Control System, Taiyuan University of Technology, Taiyuan, 030024, China
- Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering, Taiyuan, 030000, China
| |
Collapse
|
5
|
Chen S, Ma H, Du Y, Tian M, Wang Z, Fan S, Zhang W, Yang HY. Heterostructures Assembled from Bi 2O 2CO 3 and MXene for Boosted Potassium-Ion Storage by Arousing the Built-in Electric Field. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2401314. [PMID: 38644698 DOI: 10.1002/smll.202401314] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/19/2024] [Revised: 03/24/2024] [Indexed: 04/23/2024]
Abstract
Bismuth-based materials have been recognized as the appealing anodes for potassium-ion batteries (PIBs) due to their high theoretical capacity. However, the kinetics sluggishness and capacity decline induced by the structure distortion predominately retard their further development. Here, a heterostructure of polyaniline intercalated Bi2O2CO3/MXene (BOC-PA/MXene) hybrids is reported via simple self-assembly strategy. The ingenious design of heterointerface-rich architecture motivates significantly the interior self-built-in electric field (IEF) and high-density electron flow, thus accelerating the charge transfer and boosting ion diffusion. As a result, the hybrids realize a high reversible specific capacity, satisfying rate capability as well as long-term cycling stability. The in/ex situ characterizations further elucidate the stepwise intercalation-conversion-alloying reaction mechanism of BOC-PA/MXene. More encouragingly, the full cell investigation further highlights its competitive merits for practical application in further PIBs. The present work not only opens the way to the design of other electrodes with an appropriate working mechanism but also offers inspiration for built-in electric-field engineering toward high-performance energy storage devices.
Collapse
Affiliation(s)
- Song Chen
- Hebei Key Laboratory of Optic-Electronic Information and Materials, National & Local Joint Engineering Laboratory of New Energy Photoelectric Devices, College of Physics Science and Technology, Hebei University, Baoding, 071002, China
| | - Heping Ma
- Hebei Key Laboratory of Optic-Electronic Information and Materials, National & Local Joint Engineering Laboratory of New Energy Photoelectric Devices, College of Physics Science and Technology, Hebei University, Baoding, 071002, China
| | - Yibo Du
- Hebei Key Laboratory of Optic-Electronic Information and Materials, National & Local Joint Engineering Laboratory of New Energy Photoelectric Devices, College of Physics Science and Technology, Hebei University, Baoding, 071002, China
| | - Miao Tian
- Hebei Key Laboratory of Optic-Electronic Information Materials, College of Physics Science and Technology, Hebei University, Baoding, 071002, China
| | - Zhitao Wang
- Henan Engineering Research Center of Design and Recycle for Advanced Electrochemical Energy Storage Material, School of Materials Science and Engineering, Henan Normal University, Xinxiang, 453007, China
| | - Shuang Fan
- College of Chemistry and Environmental Engineering, International Joint Research Center for Molecular Science, Shenzhen University, Shenzhen, 518060, China
| | - Wenming Zhang
- Hebei Key Laboratory of Optic-Electronic Information and Materials, National & Local Joint Engineering Laboratory of New Energy Photoelectric Devices, College of Physics Science and Technology, Hebei University, Baoding, 071002, China
| | - Hui Ying Yang
- Pillar of Engineering Product Development, Singapore University of Technology and Design, 8 Somapah Road, Singapore, 487372, Singapore
| |
Collapse
|
6
|
Wang K, Liu L, Liu D, Wei Y, Liu Y, Wang X, Vasenko AS, Li M, Ding S, Xiao C, Pan H. MOF-Derived CoSe 2 Nanoparticles/Carbonized Melamine Foam as Catalytic Cathode Enabling Flexible Li-CO 2 Batteries with High Energy Efficiency and Stable Cycling. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2310530. [PMID: 38317526 DOI: 10.1002/smll.202310530] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/16/2023] [Revised: 01/05/2024] [Indexed: 02/07/2024]
Abstract
Rechargeable aprotic Li-CO2 batteries have aroused worldwide interest owing to their environmentally friendly CO2 fixation ability and ultra-high specific energy density. However, its practical applications are impeded by the sluggish reaction kinetics and discharge product accumulation during cycling. Herein, a flexible composite electrode comprising CoSe2 nanoparticles embedded in 3D carbonized melamine foam (CoSe2/CMF) for Li-CO2 batteries is reported. The abundant CoSe2 clusters can not only facilitate CO2 reduction/evolution kinetics but also serve as Li2CO3 nucleation sites for homogeneous discharge product growth. The CoSe2/CMF-based Li-CO2 battery exhibits a large initial discharge capacity as high as 5.62 mAh cm-2 at 0.05 mA cm-2, a remarkably small voltage gap of 0.72 V, and an ultrahigh energy efficiency of 85.9% at 0.01 mA cm-2, surpassing most of the noble metal-based catalysts. Meanwhile, the battery demonstrates excellent cycling stability of 1620 h (162 cycles) at 0.02 mA cm-2 with an average overpotential of 0.98 V and energy efficiency of 85.4%. Theoretical investigations suggest that this outstanding performance is attributed to the suitable CO2/Li adsorption and low Li2CO3 decomposition energy. Moreover, flexible Li-CO2 pouch cell with CoSe2/CMF cathode displays stable power output under different bending deformations, showing promising potential in wearable electronic devices.
Collapse
Affiliation(s)
- Ke Wang
- Institute of Science and Technology for New Energy, Xi'an Technological University, 2 Xuefuzhonglu Road, Xi'an, Shaanxi, 710021, China
| | - Limin Liu
- Xi'an Key Laboratory of Sustainable Energy Materials Chemistry, School of Chemistry, Xi'an Jiaotong University, 28 Xianning West Road, Xi'an, Shaanxi, 710049, China
| | - Dongyu Liu
- HSE University, 20 Myasnitskaya Street, Moscow, 101000, Russia
| | - Yuantao Wei
- Xi'an Key Laboratory of Sustainable Energy Materials Chemistry, School of Chemistry, Xi'an Jiaotong University, 28 Xianning West Road, Xi'an, Shaanxi, 710049, China
| | - Yanxia Liu
- Institute of Science and Technology for New Energy, Xi'an Technological University, 2 Xuefuzhonglu Road, Xi'an, Shaanxi, 710021, China
| | - Xinqiang Wang
- Institute of Science and Technology for New Energy, Xi'an Technological University, 2 Xuefuzhonglu Road, Xi'an, Shaanxi, 710021, China
| | | | - Mingtao Li
- International Research Center for Renewable Energy (IRCRE), State Key Laboratory of Multiphase Flow in Power Engineering (MFPE), Xi'an Jiaotong University, 28 Xianning West Road, Xi'an, Shaanxi, 710049, China
| | - Shujiang Ding
- Xi'an Key Laboratory of Sustainable Energy Materials Chemistry, School of Chemistry, Xi'an Jiaotong University, 28 Xianning West Road, Xi'an, Shaanxi, 710049, China
| | - Chunhui Xiao
- Xi'an Key Laboratory of Sustainable Energy Materials Chemistry, School of Chemistry, Xi'an Jiaotong University, 28 Xianning West Road, Xi'an, Shaanxi, 710049, China
| | - Hongge Pan
- Institute of Science and Technology for New Energy, Xi'an Technological University, 2 Xuefuzhonglu Road, Xi'an, Shaanxi, 710021, China
| |
Collapse
|
7
|
Huang Z, Yuan Y, Yao Z, Xiu M, Wang Y, Huang Y, Guo S, Yan W. Confining Co 1.11Te 2 nanoparticles within mesoporous hollow carbon combination sphere for fast and ultralong sodium storage. J Colloid Interface Sci 2024; 658:815-826. [PMID: 38154244 DOI: 10.1016/j.jcis.2023.12.121] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/25/2023] [Revised: 12/02/2023] [Accepted: 12/19/2023] [Indexed: 12/30/2023]
Abstract
Co1.11Te2 nanoparticles are in-situ uniformly grown within mesoporous hollow carbon combination sphere (MHCCS@Co1.11Te2) using a hard-template and spray drying process, solution impregnation and pyrolysis tellurization. Material characterizations reveal that Co1.11Te2, with a diameter of ∼ 20 nm, is attached to the internal walls of the unit spheres or embedded in the mesopore shells of the unit spheres, presenting a distinctive "ships-in-combination-bottles" nanoencapsulation structure. In sodium-ion half-cells, MHCCS@Co1.11Te2 exhibits excellent cycling stability, achieving reversible capacities of 257 mAh/g at 0.5 A/g after 250 cycles, 235 mAh/g at 1.0 A/g after 300 cycles and 161 mAh/g at 10.0 A/g after 1900 cycles. Electrochemical kinetic analyses and ex-situ characterizations reveal rapid electron/Na+ transport kinetics, prominent surface pseudocapacitive behavior, robust nanocomposite structure, and multi-step conversion reactions of sodium polytellurides. In sodium-ion full-cells, MHCCS@Co1.11Te2 still demonstrates stable cycling performance at 1.0 and 5.0 A/g and excellent rate capability. The superior electrochemical performance is associated with the nanoencapsulation structure based on mesoporous hollow carbon combination spheres, which promotes electron conduction and Na+ transport. The space-confined effect maintains the high electrochemical activity and cycling stability of Co1.11Te2.
Collapse
Affiliation(s)
- Zhouyu Huang
- College of Machinery Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Yongfeng Yuan
- College of Machinery Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China; School of Materials Science and Engineering, Nanyang Technological University, 639798, Singapore.
| | - Zhujun Yao
- School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Mingzhen Xiu
- School of Materials Science and Engineering, Nanyang Technological University, 639798, Singapore
| | - Yong Wang
- School of Materials Science and Engineering, Nanyang Technological University, 639798, Singapore
| | - Yizhong Huang
- School of Materials Science and Engineering, Nanyang Technological University, 639798, Singapore
| | - Shaoyi Guo
- College of Machinery Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Weiwei Yan
- College of Metrology and Measurement Engineering, China Jiliang University, Hangzhou, 310018, China
| |
Collapse
|
8
|
Kim YB, Seo HY, Kim KH, Cho JS, Kang YC, Park GD. Synthesis of Iron Sulfide Nanocrystals Encapsulated in Highly Porous Carbon-Coated CNT Microsphere as Anode Materials for Sodium-Ion Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2305686. [PMID: 37727094 DOI: 10.1002/smll.202305686] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/06/2023] [Revised: 09/11/2023] [Indexed: 09/21/2023]
Abstract
Highly porous carbon materials with a rationally designed pore structure can be utilized as reservoirs for metal or nonmetal components. The use of small-sized metal or metal compound nanoparticles, completely encapsulated by carbon materials, has attracted significant attention as an effective approach to enhancing sodium ion storage properties. These materials have the ability to mitigate structural collapse caused by volume expansion during the charging process, enable short ion transport length, and prevent polysulfide elution. In this study, a concept of highly porous carbon-coated carbon nanotube (CNT) porous microspheres, which serve as excellent reservoir materials is suggested and a porous microsphere is developed by encapsulating iron sulfide nanocrystals within the highly porous carbon-coated CNTs using a sulfidation process. Furthermore, various sulfidation processes to determine the optimal method for achieving complete encapsulation are investigated by comparing the morphologies of diverse iron sulfide-carbon composites. The fully encapsulated structure, combined with the porous carbon, provides ample space to accommodate the significant volume changes during cycling. As a result, the porous iron sulfide-carbon-CNT composite microspheres exhibited outstanding cycling stability (293 mA h g-1 over 600 cycles at 1 A g-1 ) and remarkable rate capability (100 mA h g-1 at 5 A g-1 ).
Collapse
Affiliation(s)
- Yeong Beom Kim
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, 28644, Republic of Korea
- Department of Materials Science and Engineering, Korea University, Anam-dong, Seongbuk-gu, Seoul, 136-713, Republic of Korea
| | - Hyo Yeong Seo
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, 28644, Republic of Korea
| | - Kyeong-Ho Kim
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
- Department of Materials Science and Engineering, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan, 48513, Republic of Korea
| | - Jung Sang Cho
- Department of Engineering Chemistry, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, 28644, Republic of Korea
| | - Yun Chan Kang
- Department of Materials Science and Engineering, Korea University, Anam-dong, Seongbuk-gu, Seoul, 136-713, Republic of Korea
| | - Gi Dae Park
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, 28644, Republic of Korea
| |
Collapse
|
9
|
Dai Y, Mo DC, Qu ZT, Wang WK, Lyu SS. Organic-Inorganic Hybrid Interfaces Enable the Preparation of Nitrogen-Doped Hollow Carbon Nanospheres as High-Performance Anodes for Lithium and Potassium-Ion Batteries. MATERIALS (BASEL, SWITZERLAND) 2023; 16:4936. [PMID: 37512212 PMCID: PMC10381384 DOI: 10.3390/ma16144936] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/29/2023] [Revised: 06/23/2023] [Accepted: 06/28/2023] [Indexed: 07/30/2023]
Abstract
An abundant hollow nanostructure is crucial for fast Li+ and K+ diffusion paths and sufficient electrolyte penetration, which creates a highly conductive network for ionic and electronic transport. In this study, we successfully developed a molecular-bridge-linked, organic-inorganic hybrid interface that enables the preparation of in situ nitrogen-doped hollow carbon nanospheres. Moreover, the prepared HCNSs, with high nitrogen content of up to 10.4%, feature homogeneous and regular morphologies. The resulting HCNSs exhibit excellent lithium and potassium storage properties when used as electrode materials. Specifically, the HCNS-800 electrode demonstrates a stable reversible discharge capacity of 642 mA h g-1 at 1000 mA g-1 after 500 cycles for LIBs. Similarly, the electrode maintains a discharge capacity of 205 mA h g-1 at 100 mA g-1 after 500 cycles for KIBs. Moreover, when coupled with a high-mass-loading LiFePO4 cathode to design full cells, the HCNS-800‖LiFePO4 cells provide a specific discharge capacity of 139 mA h g-1 at 0.1 C. These results indicate that the HCNS electrode has promising potential for use in high-energy and environmentally sustainable lithium-based and potassium-based batteries.
Collapse
Affiliation(s)
- Yao Dai
- School of Materials, Sun Yat-sen University, Shenzhen 51800, China
- Guangdong Engineering Technology Research Centre for Advanced Thermal Control Material and System Integration (ATCMSI), Sun Yat-sen University, Shenzhen 51800, China
| | - Dong-Chuan Mo
- School of Materials, Sun Yat-sen University, Shenzhen 51800, China
- Guangdong Engineering Technology Research Centre for Advanced Thermal Control Material and System Integration (ATCMSI), Sun Yat-sen University, Shenzhen 51800, China
| | - Zong-Tao Qu
- School of Materials, Sun Yat-sen University, Shenzhen 51800, China
- Guangdong Engineering Technology Research Centre for Advanced Thermal Control Material and System Integration (ATCMSI), Sun Yat-sen University, Shenzhen 51800, China
| | - Wen-Kang Wang
- School of Materials, Sun Yat-sen University, Shenzhen 51800, China
- Guangdong Engineering Technology Research Centre for Advanced Thermal Control Material and System Integration (ATCMSI), Sun Yat-sen University, Shenzhen 51800, China
| | - Shu-Shen Lyu
- School of Materials, Sun Yat-sen University, Shenzhen 51800, China
- Guangdong Engineering Technology Research Centre for Advanced Thermal Control Material and System Integration (ATCMSI), Sun Yat-sen University, Shenzhen 51800, China
| |
Collapse
|
10
|
Tomichan R, Sharma A, Akash K, Siddiqui AA, Dubey A, Upadhyay TK, Kumar D, Pandey S, Nagraik R. Insight of smart biosensors for COVID-19: A review. LUMINESCENCE 2023; 38:1102-1110. [PMID: 36577837 PMCID: PMC9880657 DOI: 10.1002/bio.4430] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/17/2022] [Revised: 11/15/2022] [Accepted: 12/20/2022] [Indexed: 12/30/2022]
Abstract
The review discusses the diagnostic application of biosensors as point-of-care devices in the COVID-19 pandemic. Biosensors are important analytical tools that can be used for the robust and effective detection of infectious diseases in real-time. In this current scenario, the utilization of smart, efficient biosensors for COVID-19 detection is increasing and we have included a few smart biosensors such as smart and intelligent based biosensors, plasmonic biosensors, field effect transistor (FET) biosensors, smart optical biosensors, surface enhanced Raman scattering (SERS) biosensor, screen printed electrode (SPE)-based biosensor, molecular imprinted polymer (MIP)-based biosensor, MXene-based biosensor and metal-organic frame smart sensor. Their significance as well as the benefits and drawbacks of each kind of smart sensor are mentioned in depth. Furthermore, we have compiled a list of various biosensors which have been developed across the globe for COVID-19 and have shown promise as commercial detection devices. Significant challenges in the development of effective diagnostic methods are discussed and recommendations have been made for better diagnostic outcomes to manage the ongoing pandemic effectively.
Collapse
Affiliation(s)
- Rosemary Tomichan
- Faculty of Applied Sciences and BiotechnologyShoolini UniversitySolanHimachal PradeshIndia
| | - Avinash Sharma
- Faculty of Applied Sciences and BiotechnologyShoolini UniversitySolanHimachal PradeshIndia
| | - K. Akash
- Faculty of Applied Sciences and BiotechnologyShoolini UniversitySolanHimachal PradeshIndia
| | - Adeeb Ahmad Siddiqui
- Faculty of Applied Sciences and BiotechnologyShoolini UniversitySolanHimachal PradeshIndia
| | - Amit Dubey
- Computational Chemistry and Drug Discovery DivisionQuanta Calculus Pvt. LtdKushinagarUttar PradeshIndia
- Department of Pharmacology, Saveetha Dental College and HospitalSaveetha Institute of Medical and Technical SciencesChennaiTamil NaduIndia
| | - Tarun Kumar Upadhyay
- Department of Biotechnology, Parul Institute of Applied Sciences, Animal Cell Culture and Immunobiochemistry LabParul UniversityVadodaraGujaratIndia
| | - Deepak Kumar
- Department of Pharmaceutical Chemistry, School of Pharmaceutical SciencesShoolini UniversitySolanHimachal PradeshIndia
| | - Sadanand Pandey
- Department of Chemistry, College of Natural SciencesYeungnam UniversityGyeongsanGyeongbukSouth Korea
| | - Rupak Nagraik
- Faculty of Applied Sciences and BiotechnologyShoolini UniversitySolanHimachal PradeshIndia
| |
Collapse
|
11
|
Lamiel C, Hussain I, Rabiee H, Ogunsakin OR, Zhang K. Metal-organic framework-derived transition metal chalcogenides (S, Se, and Te): Challenges, recent progress, and future directions in electrochemical energy storage and conversion systems. Coord Chem Rev 2023. [DOI: 10.1016/j.ccr.2023.215030] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
|
12
|
Cong C, Ma H. Advances of Electroactive Metal-Organic Frameworks. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2207547. [PMID: 36631286 DOI: 10.1002/smll.202207547] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/03/2022] [Revised: 01/02/2023] [Indexed: 06/17/2023]
Abstract
The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H+ , alkaline, organic, and redox flow batteries) are categorized for batteries.
Collapse
Affiliation(s)
- Cong Cong
- Key Laboratory of Flexible Electronics (KLOFE), Institute of Advanced Materials (IAM), School of Flexible Electronics (Future Technologies), Nanjing Tech University, 30 South Puzhu Road, Nanjing, 21186, China
| | - Huaibo Ma
- Key Laboratory of Flexible Electronics (KLOFE), Institute of Advanced Materials (IAM), School of Flexible Electronics (Future Technologies), Nanjing Tech University, 30 South Puzhu Road, Nanjing, 21186, China
| |
Collapse
|
13
|
Cong B, Li X, Suo Y, Chen G. Metal-organic framework derived bimetallic selenide embedded in nitrogen-doped carbon hierarchical nanosphere for highly reversible sodium-ion storage. J Colloid Interface Sci 2023; 635:370-378. [PMID: 36599236 DOI: 10.1016/j.jcis.2022.12.153] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2022] [Revised: 12/19/2022] [Accepted: 12/27/2022] [Indexed: 12/30/2022]
Abstract
Bimetallic selenides with various valence transitions and high theoretical capacities are extensively studied as anodes for sodium-ion-batteries (SIBs), but their huge volume changes and poor capacity retention limit their practicality. Herein, a facile and controllable strategy using a binary Ni-Co metal-organic framework (MOF) precursors followed by the selenization process, which produced a cobalt nickel selenide/N-doped carbon composite ((CoNi)Se2/NC) that maintained the hierarchical nanospheres structure. Such a distinctive structure affords both Na+ and electron diffusion pathways in the electrochemical reactions as well as high electrical conductivity, thus leading to superior electrochemical performance when the designed composite is utilized as an anode in SIBs. The resulting nanospheres-like (CoNi)Se2/NC hierarchical structure exhibits a high specific capacity of 526.8 mA h g-1 at 0.2 A/g over 100 cycles, a stable cycle life with no obvious capacities loss at 1.0 and 3.0 A/g after 500 cycles, and exceptional rate capability of 322.9 mA h g-1 at 10.0 A/g.
Collapse
Affiliation(s)
- Bowen Cong
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, China
| | - Xianrong Li
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, China
| | - Yanhua Suo
- College of Chemistry and Chemical Engineering, Northeast Petroleum University, Daqing 163318, China.
| | - Gang Chen
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, China.
| |
Collapse
|
14
|
Lin WC, Yang YC, Tuan HY. Electrochemical Self-Healing Nanocrystal Electrodes for Ultrastable Potassium-Ion Storage. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023:e2300046. [PMID: 36929623 DOI: 10.1002/smll.202300046] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/03/2023] [Revised: 02/24/2023] [Indexed: 06/18/2023]
Abstract
The unique properties of self-healing materials hold great potential in battery systems, which can exhibit excellent deformability and return to its original shape after cycling. Herein, a Cu3 BiS3 anode material with self-healing mechanisms is proposed for use in ultrastable potassium-ion battery (PIB) and potassium-ion hybrid capacitor (PIHC). Different from the binder design, Cu3 BiS3 anode can exhibit the dual advantages of phase and morphological reversibility, further remaining original property after potassiation/depotassiation and exhibiting ultrastable cycling performance. The reversible electrochemical reconstruction during the continuous charge/discharge processes is beneficial to maintain the structure and function of the material. Furthermore, the conversion reactions during the charge and discharge process produce two advantages: i) suppressing the shuttle effect due to the formation of the heterostructure interface between Cu (111) and Bi (012); ii) Cu can avoid the agglomeration of Bi nanoparticles (NPs), further improving the electrochemical performance and long-cycle stability of the Cu3 BiS3 electrode. As a result, the Cu3 BiS3 electrode not only exhibits a long cycle life in half cells, but also 2000 cycles and 12000 cycles in PIB and PIHC full cells, respectively.
Collapse
Affiliation(s)
- Wei-Cheng Lin
- Department of Chemical Engineering, National Tsing Hua University, Hsinchu, 30013, Taiwan
| | - Yi-Chun Yang
- Department of Chemical Engineering, National Tsing Hua University, Hsinchu, 30013, Taiwan
| | - Hsing-Yu Tuan
- Department of Chemical Engineering, National Tsing Hua University, Hsinchu, 30013, Taiwan
| |
Collapse
|
15
|
A highly sensitive and specific luminescent MOF determines nitric oxide production and quantifies hydrogen sulfide-mediated inhibition of nitric oxide in living cells. Mikrochim Acta 2023; 190:127. [PMID: 36897440 DOI: 10.1007/s00604-023-05660-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/24/2022] [Accepted: 12/25/2022] [Indexed: 03/11/2023]
Abstract
The synthesis of a novel carboxylate-type organic linker-based luminescent MOF (Zn(H2L) (L1)) (named PUC2) (H2L = 2-aminoterephtalic acid, L1 = 1-(3-aminopropyl) imidazole) is reported by the solvothermal method and comprehensively characterized using single-crystal XRD, PXRD, FTIR, TGA, XPS, FESEM, HRTEM, and BET. PUC2 selectively reacts with nitric oxide (▪NO) with a detection limit of 0.08 µM, and a quenching constant (0.5 × 104 M-1) indicating a strong interaction with ▪NO. PUC2 sensitivity remains unaffected by cellular proteins or biologically relevant metals (Cu2+/ Fe3+/Mg2+/ Na+/K+/Zn2+), RNS/ROS, or H2S to score ▪NO in living cells. Lastly, we used PUC2 to demonstrate that H2S inhibition increases ▪NO production by ~ 14-30% in various living cells while exogenous H2S suppresses ▪NO production, indicating that the modulation of cellular ▪NO production by H2S is rather generic and not restricted to a particular cell type. In conclusion, PUC2 can successfully detect ▪NO production in living cells and environmental samples with considerable potential for its application in improving the understanding of the role of ▪NO in biological samples and study the inter-relationship between ▪NO and H2S.
Collapse
|
16
|
Solvent templated luminescent metal-organic frameworks for specific detection of Vitamin C in aqueous media. J Mol Struct 2023. [DOI: 10.1016/j.molstruc.2023.135365] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/18/2023]
|
17
|
Kim YB, Seo HY, Kim SH, Kim TH, Choi JH, Cho JS, Kang YC, Park GD. Controllable Synthesis of Carbon Yolk-Shell Microsphere and Application of Metal Compound-Carbon Yolk-Shell as Effective Anode Material for Alkali-Ion Batteries. SMALL METHODS 2023; 7:e2201370. [PMID: 36653930 DOI: 10.1002/smtd.202201370] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/21/2022] [Revised: 12/23/2022] [Indexed: 06/17/2023]
Abstract
Recently, nanostructured carbon materials, such as hollow-, yolk-, and core-shell-configuration, have attracted attention in various fields owing to their unique physical and chemical properties. Among them, yolk-shell structured carbon is considered as a noteworthy material for energy storage due to its fast electron transfer, structural robustness, and plentiful active reaction sites. However, the difficulty of the synthesis for controllable carbon yolk-shell has been raised as a limitation. In this study, novel synthesis strategy of nanostructured carbon yolk-shell microspheres that enable to control morphology and size of the yolk part is proposed for the first time. To apply in the appropriate field, cobalt compounds-carbon yolk-shell composites are applied as the anode of alkali-ion batteries and exhibit superior electrochemical performances to those of core-shell structures owing to their unique structural merits. Co3 O4 -C hollow yolk-shell as a lithium-ion battery anode exhibits a long cycling lifetime (619 mA h g-1 for 400 cycles at 2 A g-1 ) and excellent rate capability (286 mA h g-1 at 10 A g-1 ). The discharge capacities of CoSe2 -C hollow yolk-shell as sodium- and potassium-ion battery anodes at the 200th cycle are 311 mA h g-1 at 0.5 A g-1 and 268 mA h g-1 at 0.2 A g-1 , respectively.
Collapse
Affiliation(s)
- Yeong Beom Kim
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, Chungbuk, 28644, Republic of Korea
| | - Hyo Yeong Seo
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, Chungbuk, 28644, Republic of Korea
| | - Sang-Hyun Kim
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, Chungbuk, 28644, Republic of Korea
| | - Tae Ha Kim
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, Chungbuk, 28644, Republic of Korea
| | - Jae Hyeon Choi
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, Chungbuk, 28644, Republic of Korea
| | - Jung Sang Cho
- Department of Engineering Chemistry, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, Chungbuk, 28644, Republic of Korea
| | - Yun Chan Kang
- Department of Materials Science and Engineering, Korea University, Anam-dong, Seongbuk-gu, Seoul, 136-713, Republic of Korea
| | - Gi Dae Park
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, Chungbuk, 28644, Republic of Korea
| |
Collapse
|
18
|
Jiang Y, Yu Z, Zhou X, Cheng X, Huang H, Liu F, Yang Y, He S, Pan H, Yang H, Yao Y, Rui X, Yu Y. Single-Atom Vanadium Catalyst Boosting Reaction Kinetics of Polysulfides in Na-S Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2208873. [PMID: 36366906 DOI: 10.1002/adma.202208873] [Citation(s) in RCA: 12] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/26/2022] [Revised: 11/02/2022] [Indexed: 06/16/2023]
Abstract
The practical application of the room-temperature sodium-sulfur (RT Na-S) batteries is hindered by the insulated sulfur, the severe shuttle effect of sodium polysulfides, and insufficient polysulfide conversion. Herein, on the basis of first principles calculations, single-atom vanadium anchored on a 3D nitrogen-doped hierarchical porous carbon matrix (denoted as 3D-PNCV) is designed and fabricated to enhance sulfur reactivity, and adsorption and catalytic conversion performance of sodium polysulfide. The 3D-PNCV host with abundant and active V sites, hierarchical porous structure, high electrical conductivity, and strong chemical adsorption/conversion ability of V-N bonding can immobilize the polysulfides and promote reversibly catalytic conversion of polysulfides toward Na2 S. Therefore, as-fabricated RT Na-S batteries can achieve a high reversible capacity (445 mAh g-1 over 800 cycles at 5 A g-1 ) and excellent rate capability (224 mAh g-1 at 10 A g-1 ). The electrocatalysis mechanism of sodium polysulfides is further experimentally and theoretically revealed, which provides a new strategy to develop the highly stable RT Na-S batteries.
Collapse
Affiliation(s)
- Yu Jiang
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui, 230026, China
- Guangdong Provincial Key Laboratory on Functional Soft Condensed Matter, School of Materials and Energy, Guangdong University of Technology, Guangzhou, Guangdong, 510006, China
- School of Materials Science and Engineering, Anhui University, Hefei, 230601, China
| | - Zuxi Yu
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui, 230026, China
| | - XueFeng Zhou
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui, 230026, China
| | - Xiaolong Cheng
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui, 230026, China
- School of Materials Science and Engineering, Anhui University, Hefei, 230601, China
| | - Huijuan Huang
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui, 230026, China
| | - Fanfan Liu
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui, 230026, China
| | - Yaxiong Yang
- Institute of Science and Technology for New Energy, Xi'an Technological University, Xi'an, 710021, China
| | - Shengnan He
- Institute of Science and Technology for New Energy, Xi'an Technological University, Xi'an, 710021, China
| | - Hongge Pan
- Institute of Science and Technology for New Energy, Xi'an Technological University, Xi'an, 710021, China
| | - Hai Yang
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui, 230026, China
| | - Yu Yao
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui, 230026, China
| | - Xianhong Rui
- Guangdong Provincial Key Laboratory on Functional Soft Condensed Matter, School of Materials and Energy, Guangdong University of Technology, Guangzhou, Guangdong, 510006, China
| | - Yan Yu
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, CAS Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui, 230026, China
- National Synchrotron Radiation Laboratory, Hefei, Anhui, 230026, China
| |
Collapse
|
19
|
Liu T, Peng J, Xu Y, Huang J. Zeolitic Imidazolate Frameworks Derived Co 9 S 8 /Nitrogen-Doped Hollow Porous Carbon Spheres as Efficient Bifunctional Electrocatalysts for Rechargeable Zinc-Air Batteries. Chemphyschem 2023; 24:e202200607. [PMID: 36177607 DOI: 10.1002/cphc.202200607] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/15/2022] [Revised: 09/27/2022] [Indexed: 01/19/2023]
Abstract
The development of nonprecious metal-based electrocatalysts with remarkable catalytic activity and long-cycling lifespan toward oxygen reduction reaction (ORR) and evolution reaction (OER) is especially important for rechargeable zinc-air batteries (ZABs). Herein, monodispersed Co9 S8 nanoparticles embedded in nitrogen-doped hierarchically porous hollow carbon spheres (Co9 S8 NPs/NHCS) are synthesized through a template-assisted strategy followed by a co-assembly, thermal annealing, and sulfurization process. Benefiting from larger specific surface area, hierarchically porous hollow structure, and carbon nanotubes self-growth, the obtained Co9 S8 NPs/NHCS-0.5 electrocatalyst exhibits decent performance for ORR (E1/2 =0.85 V) and OER (E10 =1.55 V). A rechargeable ZAB assembled using the Co9 S8 NPs/NHCS-0.5 as air cathode delivers a maximum power density of 116 mW cm-2 , high open circuit voltage of 1.47 V, and good durability (no obvious voltage decay after 1200 cycles (200 hours)). Such a hierarchically porous hollow structure of Co9 S8 NPs/NHCS-0.5 provides a confined space shell and an interconnected hollow core to achieve outstanding bifunctional catalytic activity and cycling stability, which surpass the benchmark Pt/C-RuO2 .
Collapse
Affiliation(s)
- Ting Liu
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, 510006, Guangzhou, China.,Institute of Advanced Metal and Functional Materials, Faculty of Materials Metallurgy and Chemistry, Jiangxi University of Science and Technology, 341000, Ganzhou, China
| | - Jiayao Peng
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, 510006, Guangzhou, China
| | - Yuting Xu
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, 510006, Guangzhou, China
| | - Jianlin Huang
- School of Environment and Energy, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, 510006, Guangzhou, China
| |
Collapse
|
20
|
Metal-organic framework derived core-shell structured Cu-doped Co0.85Se@NC@C microcubes as advanced anodes for sodium-ion batteries. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.141157] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
21
|
Li W, Yang Z, Zuo J, Wang J, Li X. Emerging carbon-based flexible anodes for potassium-ion batteries: Progress and opportunities. Front Chem 2022; 10:1002540. [PMID: 36157035 PMCID: PMC9493046 DOI: 10.3389/fchem.2022.1002540] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/25/2022] [Accepted: 08/22/2022] [Indexed: 11/30/2022] Open
Abstract
In recent years, carbon-based flexible anodes for potassium-ion batteries are increasingly investigated owing to the low reduction potential and abundant reserve of K and the simple preparation process of flexible electrodes. In this review, three main problems on pristine carbon-based flexible anodes are summarized: excessive volume change, repeated SEI growth, and low affinity with K+, which thus leads to severe capacity fade, sluggish K+ diffusion dynamics, and limited active sites. In this regard, the recent progress on the various modification strategies is introduced in detail, which are categorized as heteroatom-doping, coupling with metal and chalcogenide nanoparticles, and coupling with other carbonaceous materials. It is found that the doping of heteroatoms can bring the five enhancement effects of increasing active sites, improving electrical conductivity, expediting K+ diffusion, strengthening structural stability, and enlarging interlayer spacing. The coupling of metal and chalcogenide nanoparticles can largely offset the weakness of the scarcity of K+ storage sites and the poor wettability of pristine carbon-based flexible electrodes. The alloy nanoparticles consisting of the electrochemically active and inactive metals can concurrently gain a stable structure and high capacity in comparison to mono-metal nanoparticles. The coupling of the carbonaceous materials with different characteristics can coordinate the advantages of the nanostructure from graphite carbon, the defects and vacancies from amorphous carbon, and the independent structure from support carbon. Finally, the emerging challenges and opportunities for the development of carbon-based flexible anodes are presented.
Collapse
Affiliation(s)
- Wenbin Li
- Shaanxi International Joint Research Center of Surface Technology for Energy Storage Materials, Xi’an Key Laboratory of New Energy Materials and Devices, Institute of Advanced Electrochemical Energy and School of Materials Science and Engineering, Xi’an University of Technology, Xi’an, China
- Key Laboratory of Advanced Batteries Materials for Electric Vehicles of China Petroleum and Chemical Industry Federation, Xi’an University of Technology, Xi’an, China
| | - Zihao Yang
- Shaanxi International Joint Research Center of Surface Technology for Energy Storage Materials, Xi’an Key Laboratory of New Energy Materials and Devices, Institute of Advanced Electrochemical Energy and School of Materials Science and Engineering, Xi’an University of Technology, Xi’an, China
- Key Laboratory of Advanced Batteries Materials for Electric Vehicles of China Petroleum and Chemical Industry Federation, Xi’an University of Technology, Xi’an, China
| | - Jiaxuan Zuo
- Shaanxi International Joint Research Center of Surface Technology for Energy Storage Materials, Xi’an Key Laboratory of New Energy Materials and Devices, Institute of Advanced Electrochemical Energy and School of Materials Science and Engineering, Xi’an University of Technology, Xi’an, China
- Key Laboratory of Advanced Batteries Materials for Electric Vehicles of China Petroleum and Chemical Industry Federation, Xi’an University of Technology, Xi’an, China
| | - Jingjing Wang
- Shaanxi International Joint Research Center of Surface Technology for Energy Storage Materials, Xi’an Key Laboratory of New Energy Materials and Devices, Institute of Advanced Electrochemical Energy and School of Materials Science and Engineering, Xi’an University of Technology, Xi’an, China
- Key Laboratory of Advanced Batteries Materials for Electric Vehicles of China Petroleum and Chemical Industry Federation, Xi’an University of Technology, Xi’an, China
| | - Xifei Li
- Shaanxi International Joint Research Center of Surface Technology for Energy Storage Materials, Xi’an Key Laboratory of New Energy Materials and Devices, Institute of Advanced Electrochemical Energy and School of Materials Science and Engineering, Xi’an University of Technology, Xi’an, China
- Key Laboratory of Advanced Batteries Materials for Electric Vehicles of China Petroleum and Chemical Industry Federation, Xi’an University of Technology, Xi’an, China
- *Correspondence: Xifei Li,
| |
Collapse
|
22
|
Cao Z, Momen R, Tao S, Xiong D, Song Z, Xiao X, Deng W, Hou H, Yasar S, Altin S, Bulut F, Zou G, Ji X. Metal-Organic Framework Materials for Electrochemical Supercapacitors. NANO-MICRO LETTERS 2022; 14:181. [PMID: 36050520 PMCID: PMC9437182 DOI: 10.1007/s40820-022-00910-9] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/04/2022] [Accepted: 06/11/2022] [Indexed: 06/15/2023]
Abstract
Exploring new materials with high stability and capacity is full of challenges in sustainable energy conversion and storage systems. Metal-organic frameworks (MOFs), as a new type of porous material, show the advantages of large specific surface area, high porosity, low density, and adjustable pore size, exhibiting a broad application prospect in the field of electrocatalytic reactions, batteries, particularly in the field of supercapacitors. This comprehensive review outlines the recent progress in synthetic methods and electrochemical performances of MOF materials, as well as their applications in supercapacitors. Additionally, the superiorities of MOFs-related materials are highlighted, while major challenges or opportunities for future research on them for electrochemical supercapacitors have been discussed and displayed, along with extensive experimental experiences.
Collapse
Affiliation(s)
- Ziwei Cao
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China
| | - Roya Momen
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China
| | - Shusheng Tao
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China
| | - Dengyi Xiong
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China
| | - Zirui Song
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China
| | - Xuhuan Xiao
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China
| | - Wentao Deng
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China
| | - Hongshuai Hou
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China
| | - Sedat Yasar
- Department of Chemistry, Faculty of Science, Inonu University, 44280, Battalgazi, Malatya, Turkey
| | - Sedar Altin
- Physics Department, Inonu University, 44280, Malatya, Turkey
| | - Faith Bulut
- Physics Department, Inonu University, 44280, Malatya, Turkey
| | - Guoqiang Zou
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China.
| | - Xiaobo Ji
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, People's Republic of China
- School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, 450001, People's Republic of China
| |
Collapse
|
23
|
Gao L, Chen G, Zhang L, Yang X. Dual carbon regulated yolk-shell ZnSe microsphere anode materials towards high performance potassium ion batteries. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.140717] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
24
|
Co-Co LDH-Derived CoSe2 Anchored on N-Doped Carbon Nanospheres as High-Performance Anodes for Sodium-Ion Batteries. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.141012] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
25
|
Zheng H, Xu HS, Hu J, Liu H, Wei L, Wu S, Li J, Huang Y, Tang K. Electrochemical performance of CoSe 2 with mixed phases decorated with N-doped rGO in potassium-ion batteries. RSC Adv 2022; 12:21374-21384. [PMID: 35975082 PMCID: PMC9344900 DOI: 10.1039/d2ra03608h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/11/2022] [Accepted: 07/19/2022] [Indexed: 11/21/2022] Open
Abstract
Potassium-ion batteries (PIBs) have received much attention as next-generation energy storage systems because of their abundance, low cost, and slightly lower standard redox potential than lithium-ion batteries (LIBs). Nevertheless, they still face great challenges in the design of the best electrode materials for applications. Herein, we have successfully synthesized nano-sized CoSe2 encapsulated by N-doped reduced graphene oxide (denoted as CoSe2@N-rGO) by a direct one-step hydrothermal method, including both orthorhombic and cubic CoSe2 phases. The CoSe2@N-rGO anodes exhibit a high reversible capacity of 599.3 mA h g−1 at 0.05 A g−1 in the initial cycle, and in particular, they also exhibit a cycling stability of 421 mA h g−1 after 100 cycles at 0.2 A g−1. Density functional theory (DFT) calculations show that CoSe2 with N-doped carbon can greatly accelerate electron transfer and enhance the rate performance. In addition, the intrinsic causes of the higher electrochemical performance of orthorhombic CoSe2 than that of cubic CoSe2 are also discussed. Potassium-ion batteries (PIBs) have received much attention as next-generation energy storage systems because of their abundance, low cost, and slightly lower standard redox potential than lithium-ion batteries (LIBs).![]()
Collapse
Affiliation(s)
- Hui Zheng
- Department of Chemistry, University of Science and Technology of China Hefei 230026 People's Republic of China
| | - Han-Shu Xu
- Hefei National Research Center for Physical Sciences at the Microscale, University of Science and Technology of China Hefei 230026 People's Republic of China .,Department of Chemistry, University of Science and Technology of China Hefei 230026 People's Republic of China
| | - Jiaping Hu
- Department of Chemistry, University of Science and Technology of China Hefei 230026 People's Republic of China
| | - Huimin Liu
- Department of Chemistry, University of Science and Technology of China Hefei 230026 People's Republic of China
| | - Lianwei Wei
- Department of Chemistry, University of Science and Technology of China Hefei 230026 People's Republic of China
| | - Shusheng Wu
- Department of Chemistry, University of Science and Technology of China Hefei 230026 People's Republic of China
| | - Jin Li
- Department of Chemistry, University of Science and Technology of China Hefei 230026 People's Republic of China
| | - Yuhu Huang
- Department of Chemistry, University of Science and Technology of China Hefei 230026 People's Republic of China
| | - Kaibin Tang
- Hefei National Research Center for Physical Sciences at the Microscale, University of Science and Technology of China Hefei 230026 People's Republic of China .,Department of Chemistry, University of Science and Technology of China Hefei 230026 People's Republic of China
| |
Collapse
|
26
|
Chen L, Yuan YF, Zhu M, Yin SM, Du PF, Mo CL. Hierarchical hollow superstructure cobalt selenide bird nests for high-performance lithium storage. J Colloid Interface Sci 2022; 627:449-458. [PMID: 35868040 DOI: 10.1016/j.jcis.2022.07.071] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/16/2022] [Revised: 07/11/2022] [Accepted: 07/12/2022] [Indexed: 11/26/2022]
Abstract
The inferior cycling performance caused by large volume variation is the main problem that restricts the application of cobalt selenides in lithium-ion batteries. Herein, we synthesize raspberry-like Co-ethylene glycol precursor. It is further selenized into the hierarchical hollow superstructure CoSe2/CoSe bird nests that are assembled by the hollow nanosphere units of CoSe2 and CoSe nanocrystalline. CoSe2/CoSe bird nests achieve excellent cycling performance, high reversible capacity and satisfactory rate capability (1361 mAh/g at 1 A/g after 1000 cycles, 579 mAh/g at 2 A/g after 2000 cycles, 315 mAh/g at 5 A/g after 1000 cycles). Electrochemical kinetics analyses and ex-situ material characterization reveal that the surface capacitive behavior controls the electrochemical reaction, and the composite has low reaction impedance, fast and stable Li+ diffusion, and superior structural stability. The superior lithium storage performance is attributed to the unique superstructure bird nest. Large specific surface area, abundant hierarchical pores and the opening mouth result in high electrochemical activity, which induces high reversible capacity. The small hollow nanosphere units, the sufficiently thick hierarchical porous superstructure shell and the large hollow interior bring about the strong synergistic effect to improve cycling performance. The intimately coupling of CoSe2/CoSe nanocrystalline and the hollow nanosphere units guarantees high conductivity. This work has greatly enriched the understanding of structure design of high-performance cobalt selenide anodes.
Collapse
Affiliation(s)
- L Chen
- College of Machinery and Automation, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Y F Yuan
- College of Machinery and Automation, Zhejiang Sci-Tech University, Hangzhou 310018, China.
| | - M Zhu
- College of Machinery and Automation, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - S M Yin
- College of Machinery and Automation, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - P F Du
- College of Textile Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - C L Mo
- College of Machinery and Automation, Zhejiang Sci-Tech University, Hangzhou 310018, China.
| |
Collapse
|
27
|
Lee JS, Saroha R, Cho JS. Porous Microspheres Comprising CoSe 2 Nanorods Coated with N-Doped Graphitic C and Polydopamine-Derived C as Anodes for Long-Lived Na-Ion Batteries. NANO-MICRO LETTERS 2022; 14:113. [PMID: 35482108 PMCID: PMC9050979 DOI: 10.1007/s40820-022-00855-z] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/27/2022] [Accepted: 03/23/2022] [Indexed: 05/23/2023]
Abstract
Metal-organic framework-templated nitrogen-doped graphitic carbon (NGC) and polydopamine-derived carbon (PDA-derived C)-double coated one-dimensional CoSe2 nanorods supported highly porous three-dimensional microspheres are introduced as anodes for excellent Na-ion batteries, particularly with long-lived cycle under carbonate-based electrolyte system. The microspheres uniformly composed of ZIF-67 polyhedrons and polystyrene nanobeads (ϕ = 40 nm) are synthesized using the facile spray pyrolysis technique, followed by the selenization process (P-CoSe2@NGC NR). Further, the PDA-derived C-coated microspheres are obtained using a solution-based coating approach and the subsequent carbonization process (P-CoSe2@PDA-C NR). The rational synthesis approach benefited from the synergistic effects of dual carbon coating, resulting in a highly conductive and porous nanostructure that could facilitate rapid diffusion of charge species along with efficient electrolyte infiltration and effectively channelize the volume stress. Consequently, the prepared nanostructure exhibits extraordinary electrochemical performance, particularly the ultra-long cycle life stability. For instance, the advanced anode has a discharge capacity of 291 (1000th cycle, average capacity decay of 0.017%) and 142 mAh g-1 (5000th cycle, average capacity decay of 0.011%) at a current density of 0.5 and 2.0 A g-1, respectively.
Collapse
Affiliation(s)
- Jae Seob Lee
- Department of Engineering Chemistry, Chungbuk National University, Cheongju, Chungbuk, 361-763, Republic of Korea
| | - Rakesh Saroha
- Department of Engineering Chemistry, Chungbuk National University, Cheongju, Chungbuk, 361-763, Republic of Korea
| | - Jung Sang Cho
- Department of Engineering Chemistry, Chungbuk National University, Cheongju, Chungbuk, 361-763, Republic of Korea.
| |
Collapse
|
28
|
Sun L, Liu Y, Yan M, Liu W, Liu X, Shi W. ZIFs derived multiphase CoSe2 nanoboxes induced and fixed on CoAl-LDH nanoflowers for high-performance hybrid supercapacitor. Chem Eng Sci 2022. [DOI: 10.1016/j.ces.2021.117241] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
29
|
Chen L, Wang X, Ding Y, Li Y, Ren SB, Shen M, Chen YX, Li W, Han DM. Metal-organic framework-derived nitrogen-doped carbon-confined CoSe 2 anchored on multiwalled carbon nanotube networks as an anode for high-rate sodium-ion batteries. Dalton Trans 2022; 51:5184-5194. [PMID: 35285466 DOI: 10.1039/d1dt04271h] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Abstract
Metal selenides, as potential alternative candidates for sodium storage, have promising applicability due to their high theoretical specific capacity. However, their huge volume change and sluggish electrode kinetics during sodium ion uptake and release processes can result in insufficient cycling life and inferior rate performance, hindering their practical application. Herein, nitrogen (N)-doped carbon-confined cobalt selenide anchored on multiwalled carbon nanotube networks (denoted as CoSe2@NC/MWCNTs) was designed and successfully built through a selenization process with ZIF-67 MOF as the template. The existence of the interconnected MWCNT network plays a crucial role in not only enhancing the electronic conductivity and ion/electron-transfer efficiency but also ensuring structural stability. Consequently, the optimized CoSe2@NC/MWCNTs composite delivers a high reversible capacity of 479.6 mA h g-1 at a current rate of 0.2 A g-1, accompanied by a 92.0% capacity retention over 100 cycles and a predominant rate performance of 227.4 mA h g-1 even under 20 A g-1 when examined as the anode in Na-ion batteries. Moreover, the kinetic behaviors were confirmed using CV profiles at various rates, as well as the galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS). Besides, the HRTEM images clearly reveal the sodium-ion storage mechanism of the CoSe2 hybrid. These results make CoSe2@NC/MWCNTs a prospective anode material in advanced sodium-ion batteries.
Collapse
Affiliation(s)
- Lei Chen
- School of Pharmaceutical Chemical and Materials Engineering, Taizhou University, Taizhou, 318000, P. R. China.
| | - Xuefan Wang
- School of Pharmaceutical Chemical and Materials Engineering, Taizhou University, Taizhou, 318000, P. R. China.
| | - Yijiao Ding
- School of Pharmaceutical Chemical and Materials Engineering, Taizhou University, Taizhou, 318000, P. R. China.
| | - Yuke Li
- School of Pharmaceutical Chemical and Materials Engineering, Taizhou University, Taizhou, 318000, P. R. China. .,Department of Chemistry, Zhejiang Sci-Tech University, Hangzhou, 310018, P. R. China
| | - Shi-Bin Ren
- School of Pharmaceutical Chemical and Materials Engineering, Taizhou University, Taizhou, 318000, P. R. China.
| | - Mao Shen
- School of Pharmaceutical Chemical and Materials Engineering, Taizhou University, Taizhou, 318000, P. R. China.
| | - Yu-Xiang Chen
- School of Pharmaceutical Chemical and Materials Engineering, Taizhou University, Taizhou, 318000, P. R. China.
| | - Wei Li
- School of Pharmaceutical Chemical and Materials Engineering, Taizhou University, Taizhou, 318000, P. R. China.
| | - De-Man Han
- School of Pharmaceutical Chemical and Materials Engineering, Taizhou University, Taizhou, 318000, P. R. China.
| |
Collapse
|
30
|
Khan N, Han G, Mazari SA. Carbon nanotubes-based anode materials for potassium ion batteries: A review. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116051] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
31
|
Yang G, Yan C, Hu P, Fu Q, Zhao H, Lei Y. Synthesis of CoSe 2 reinforced nitrogen-doped carbon composites as advanced anodes for potassium-ion batteries. Inorg Chem Front 2022. [DOI: 10.1039/d2qi00848c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Owing to the synergistic effect of CoSe2 and N-doped carbon matrix, a composite of CoSe2 nanoparticles dispersed in polydopamine-derived N-doped carbon matrix exhibits high specific capacity and excellent cyclability as potassium-ion battery anode.
Collapse
Affiliation(s)
- Guowei Yang
- Institute of Nanochemistry and Nanobiology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444, China
| | - Chengzhan Yan
- Fachgebiet Angewandte Nanophysik, Institut für Physik & ZMN MacroNano (ZIK), Technische Universität Ilmenau, Ilmenau 98693, Germany
| | - Ping Hu
- Institute of Nanochemistry and Nanobiology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444, China
| | - Qun Fu
- Institute of Nanochemistry and Nanobiology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444, China
| | - Huaping Zhao
- Fachgebiet Angewandte Nanophysik, Institut für Physik & ZMN MacroNano (ZIK), Technische Universität Ilmenau, Ilmenau 98693, Germany
| | - Yong Lei
- Fachgebiet Angewandte Nanophysik, Institut für Physik & ZMN MacroNano (ZIK), Technische Universität Ilmenau, Ilmenau 98693, Germany
| |
Collapse
|
32
|
Designing coral-like Fe2O3-regulated Se-rich CoSe2 heterostructure as a highly active and stable oxygen evolution electrocatalyst for overall water splitting. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2021.115928] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
33
|
Fan L, Hu Y, Rao AM, Zhou J, Hou Z, Wang C, Lu B. Prospects of Electrode Materials and Electrolytes for Practical Potassium-Based Batteries. SMALL METHODS 2021; 5:e2101131. [PMID: 34928013 DOI: 10.1002/smtd.202101131] [Citation(s) in RCA: 40] [Impact Index Per Article: 13.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/14/2021] [Revised: 10/19/2021] [Indexed: 05/20/2023]
Abstract
Potassium-ion batteries (PIBs) have attracted tremendous attention because of their high energy density and low-cost. As such, much effort has focused on developing electrode materials and electrolytes for PIBs at the material levels. This review begins with an overview of the high-performance electrode materials and electrolytes, and then evaluates their prospects and challenges for practical PIBs to penetrate the market. The current status of PIBs for safe operation, energy density, power density, cyclability, and sustainability is discussed and future studies for electrode materials, electrolytes, and electrode-electrolyte interfaces are identified. It is anticipated that this review will motivate research and development to fill existing gaps for practical potassium-based full batteries so that they may be commercialized in the near future.
Collapse
Affiliation(s)
- Ling Fan
- School of Physics and Electronics, Hunan University, Changsha, 410082, China
| | - Yanyao Hu
- School of Physics and Electronics, Hunan University, Changsha, 410082, China
| | - Apparao M Rao
- Clemson Nanomaterials Institute, Department of Physics and Astronomy, Clemson University, Clemson, SC, 29634, USA
| | - Jiang Zhou
- School of Materials Science and Engineering, Central South University, Changsha, 410083, China
| | - Zhaohui Hou
- School of Chemistry and Chemical Engineering, Hunan Institute of Science and Technology, Yueyang, 414006, China
| | - Chengxin Wang
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou, 510275, China
| | - Bingan Lu
- School of Physics and Electronics, Hunan University, Changsha, 410082, China
| |
Collapse
|
34
|
Liu Y, Zheng X, Yang Y, Li J, Liu W, Shen Y, Tian X. Photocatalytic Hydrogen Evolution Using Ternary‐Metal‐Sulfide/TiO
2
Heterojunction Photocatalysts. ChemCatChem 2021. [DOI: 10.1002/cctc.202101439] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Affiliation(s)
- Yuhao Liu
- State Key Laboratory of Marine Resource Utilization in South China Sea Hainan Provincial Key Lab of Fine Chemistry School of Science Hainan University Haikou 570228 P. R. China
| | - Xinlong Zheng
- State Key Laboratory of Marine Resource Utilization in South China Sea Hainan Provincial Key Lab of Fine Chemistry School of Science Hainan University Haikou 570228 P. R. China
- Mechanical and Electrical Engineering College Hainan University Haikou 570228 P. R. China
| | - Yingjie Yang
- State Key Laboratory of Marine Resource Utilization in South China Sea Hainan Provincial Key Lab of Fine Chemistry School of Science Hainan University Haikou 570228 P. R. China
| | - Jing Li
- State Key Laboratory of Marine Resource Utilization in South China Sea Hainan Provincial Key Lab of Fine Chemistry School of Science Hainan University Haikou 570228 P. R. China
| | - Weifeng Liu
- Mechanical and Electrical Engineering College Hainan University Haikou 570228 P. R. China
| | - Yijun Shen
- State Key Laboratory of Marine Resource Utilization in South China Sea Hainan Provincial Key Lab of Fine Chemistry School of Science Hainan University Haikou 570228 P. R. China
| | - Xinlong Tian
- State Key Laboratory of Marine Resource Utilization in South China Sea Hainan Provincial Key Lab of Fine Chemistry School of Science Hainan University Haikou 570228 P. R. China
| |
Collapse
|
35
|
Lin J, Chenna Krishna Reddy R, Zeng C, Lin X, Zeb A, Su CY. Metal-organic frameworks and their derivatives as electrode materials for potassium ion batteries: A review. Coord Chem Rev 2021. [DOI: 10.1016/j.ccr.2021.214118] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
|
36
|
Jiang Y, Xie M, Wu F, Ye Z, Zhang Y, Wang Z, Zhou Y, Li L, Chen R. Cobalt Selenide Hollow Polyhedron Encapsulated in Graphene for High-Performance Lithium/Sodium Storage. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2102893. [PMID: 34431605 DOI: 10.1002/smll.202102893] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/18/2021] [Revised: 06/12/2021] [Indexed: 06/13/2023]
Abstract
Owing to the high specific capacities, high electrochemical activity, and various electronic properties, transition metal selenides are considered as promising anodes for lithium- and sodium-ion storage. However, poor electronic conductivity and huge volume expansion during cycling are still responsible for their restricted electrochemical performance. Herein, CoSe hollow polyhedron anchoring onto graphene (CoSe/G) is synthesized by self-assembly and subsequent selenization. In CoSe/G composites, the CoSe nanoparticles, obtained by in situ selenization of metal-organic frameworks (MOFs) in high temperature, are distributed among graphene sheets, realizing N element doping, developing robust heterostructures with a chemical bond. The unique architecture ensures the cohesion of the structure and endorses the reaction kinetics for metal ions, identified by in situ and ex situ testing techniques, and kinetics analysis. Thus, the CoSe/G anodes achieve excellent cycling performance (1259 mAh g-1 at 0.1 A g-1 after 300 cycles for lithium storage; 214 mAh g-1 at 2 A g-1 after 600 cycles for sodium storage) and rate capability (732 mAh g-1 at 5 A g-1 for lithium storage; 290 mAh g-1 at 5 A g-1 for sodium storage). The improved electrochemical performance for alkali-ion storage provides new insights for the construction of MOFs derivatives toward high-performance storage devices.
Collapse
Affiliation(s)
- Ying Jiang
- Beijing Key Laboratory of Environmental Science and Engineering, School of Material Science & Engineering, Beijing Institute of Technology, Beijing, 100081, China
| | - Man Xie
- Beijing Key Laboratory of Environmental Science and Engineering, School of Material Science & Engineering, Beijing Institute of Technology, Beijing, 100081, China
| | - Feng Wu
- Beijing Key Laboratory of Environmental Science and Engineering, School of Material Science & Engineering, Beijing Institute of Technology, Beijing, 100081, China
- Institute of Advanced Technology, Beijing Institute of Technology, Jinan, 250300, China
- Collaborative Innovation Center of Electric Vehicles in Beijing, Beijing, 100081, China
| | - Zhengqing Ye
- Beijing Key Laboratory of Environmental Science and Engineering, School of Material Science & Engineering, Beijing Institute of Technology, Beijing, 100081, China
| | - Yixin Zhang
- Beijing Key Laboratory of Environmental Science and Engineering, School of Material Science & Engineering, Beijing Institute of Technology, Beijing, 100081, China
| | - Ziheng Wang
- Beijing Key Laboratory of Environmental Science and Engineering, School of Material Science & Engineering, Beijing Institute of Technology, Beijing, 100081, China
| | - Yaozong Zhou
- Beijing Key Laboratory of Environmental Science and Engineering, School of Material Science & Engineering, Beijing Institute of Technology, Beijing, 100081, China
| | - Li Li
- Beijing Key Laboratory of Environmental Science and Engineering, School of Material Science & Engineering, Beijing Institute of Technology, Beijing, 100081, China
- Institute of Advanced Technology, Beijing Institute of Technology, Jinan, 250300, China
- Collaborative Innovation Center of Electric Vehicles in Beijing, Beijing, 100081, China
| | - Renjie Chen
- Beijing Key Laboratory of Environmental Science and Engineering, School of Material Science & Engineering, Beijing Institute of Technology, Beijing, 100081, China
- Institute of Advanced Technology, Beijing Institute of Technology, Jinan, 250300, China
- Collaborative Innovation Center of Electric Vehicles in Beijing, Beijing, 100081, China
| |
Collapse
|
37
|
Liang S, Yu Z, Ma T, Shi H, Wu Q, Ci L, Tong Y, Wang J, Xu Z. Mechanistic Insights into the Structural Modulation of Transition Metal Selenides to Boost Potassium Ion Storage Stability. ACS NANO 2021; 15:14697-14708. [PMID: 34505761 DOI: 10.1021/acsnano.1c04493] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Atomic-level structure engineering is an effective strategy to reduce mechanical degradation and boost ion transport kinetics for battery anodes. To address the electrode failure induced by large ionic radius of K+ ions, herein we synthesized Mn-doped ZnSe with modulated electronic structure for potassium ion batteries (PIBs). State-of-the-art analytical techniques and theoretical calculations were conducted to probe crystalline structure changes, ion/electron migration pathways, and micromechanical stresses evolution mechanisms. We demonstrate that the heterogeneous adjustment of the electronic structure can relieve the potassiumization-induced internal strain and improve the structural stability of battery anodes. Our work highlights the importance of the correlation between doping chemistry and mechanical stability, inspiring a pathway of structural engineering strategy toward a highly stable PIBs.
Collapse
Affiliation(s)
- Shuaitong Liang
- Tianjin Municipal Key Laboratory of Advanced Fiber and Energy Storage Technology, School of Textiles Science and Engineering, Tiangong University, Tianjin, 300387, China
| | - Zhenjiang Yu
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150001, China
| | - Tianshuai Ma
- Tianjin Municipal Key Laboratory of Advanced Fiber and Energy Storage Technology, School of Textiles Science and Engineering, Tiangong University, Tianjin, 300387, China
| | - Haiting Shi
- Tianjin Municipal Key Laboratory of Advanced Fiber and Energy Storage Technology, School of Textiles Science and Engineering, Tiangong University, Tianjin, 300387, China
| | - Qingqing Wu
- Tianjin Municipal Key Laboratory of Advanced Fiber and Energy Storage Technology, School of Textiles Science and Engineering, Tiangong University, Tianjin, 300387, China
| | - Lijie Ci
- State Key Laboratory of Advanced Welding and Joining, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen, 518055, China
| | - Yujin Tong
- Faculty of Physics, Duisburg-Essen University, D-47057 Duisburg, Germany
| | - Jiajun Wang
- MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150001, China
| | - Zhiwei Xu
- Tianjin Municipal Key Laboratory of Advanced Fiber and Energy Storage Technology, School of Textiles Science and Engineering, Tiangong University, Tianjin, 300387, China
| |
Collapse
|
38
|
Hussain N, Li M, Tian B, Wang H. Co 3 Se 4 Quantum Dots as an Ultrastable Host Material for Potassium-Ion Intercalation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2102164. [PMID: 34060154 DOI: 10.1002/adma.202102164] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/19/2021] [Indexed: 06/12/2023]
Abstract
Potassium-ion batteries (KIBs) are receiving increased attention due to their cost-effective and similar energy-storage mechanism to lithium-ion batteries. However, the lack of appropriate electrode materials is still hampered for their development, which is mainly caused by the large size of the potassium ions (1.38 Å) including low structural stability and poor electrochemical redox reaction kinetics. Herein, Co3 Se4 quantum dots (QD) encapsulated by N-doped carbon (CSC) are reported as an anode material for KIBs, in which a morphology change process occurs. Benefiting from the unique uniform nanostructure reducing the ion-diffusion length, the improved electronic conductivity, and the enhanced protective effect of N-doped carbon (NC) alleviating volume fluctuation, the CSC demonstrates excellent electrochemical performance. The core-shell-like CSC composite demonstrates remarkable discharge capacity (410 mA h g-1 at 0.1 A g-1 after 550 cycles, 360 mA h g-1 at 0.5 A g-1 after 3200 cycles) and excellent cyclic performance over 10 000 cycles at 1 A g-1 . Density functional theory calculations show a larger reaction energy of Co3 Se4 QD than bulk Co3 Se4 , a lower barrier of K atom migration in Co3 Se4 QD than bulk Co3 Se4 , and also favor the intercalation reaction rather than replacement reaction. In situ X-ray diffraction and ex situ transmission electron microscopy are further used to evaluate potassiation/depotassiation phenomena.
Collapse
Affiliation(s)
- Nadeem Hussain
- SZU-NUS Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
| | - Maoxin Li
- SZU-NUS Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
| | - Bingbing Tian
- SZU-NUS Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
| | - Haihui Wang
- Beijing Key Laboratory of Membrane Materials and Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, China
| |
Collapse
|