1
|
Jiang Y, Lao J, Dai G, Ye Z. Advanced Insights on MXenes: Categories, Properties, Synthesis, and Applications in Alkali Metal Ion Batteries. ACS NANO 2024; 18:14050-14084. [PMID: 38781048 DOI: 10.1021/acsnano.3c12543] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2024]
Abstract
The development and optimization of promising anode material for next-generation alkali metal ion batteries are significant for clean energy evolution. 2D MXenes have drawn extensive attention in electrochemical energy storage applications, due to their multiple advantages including excellent conductivity, robust mechanical properties, hydrophilicity of its functional terminations, and outstanding electrochemical storage capability. In this review, the categories, properties, and synthesis methods of MXenes are first outlined. Furthermore, the latest research and progress of MXenes and their composites in alkali metal ion storage are also summarized comprehensively. A special emphasis is placed on MXenes and their hybrids, ranging from material design and fabrication to fundamental understanding of the alkali ion storage mechanisms to battery performance optimization strategies. Lastly, the challenges and personal perspectives of the future research of MXenes and their composites for energy storage are presented.
Collapse
Affiliation(s)
- Ying Jiang
- School of Material Science and Engineering, Tianjin Key Lab of Photoelectric Materials & Devices, Key Laboratory of Display Materials and Photoelectric Devices (Ministry of Education), Tianjin University of Technology, Tianjin 300384, P.R. China
| | - Junchao Lao
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P.R. China
| | - Guangfu Dai
- Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology, School of Material Science and Engineering, Hebei University of Technology, Tianjin 300401, P.R. China
| | - Zhengqing Ye
- Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology, School of Material Science and Engineering, Hebei University of Technology, Tianjin 300401, P.R. China
- Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Avenida da Universidade, Taipa, Macau SAR 999078, P.R. China
| |
Collapse
|
2
|
Muthukutty B, Kumar PS, Vivekanandan AK, Sivakumar M, Lee S, Lee D. Progress and Perspective in harnessing MXene-carbon-based composites (0-3D): Synthesis, performance, and applications. CHEMOSPHERE 2024; 355:141838. [PMID: 38561159 DOI: 10.1016/j.chemosphere.2024.141838] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/04/2023] [Revised: 03/09/2024] [Accepted: 03/27/2024] [Indexed: 04/04/2024]
Abstract
MXene is recognized as a promising catalyst for versatile applications due to its abundant metal sites, physicochemical properties, and structural formation. This comprehensive review offers an in-depth analysis of the incorporation of carbon into MXene, resulting in the formation of MXene-carbon-based composites (MCCs). Pristine MXene exhibits numerous outstanding characteristics, such as its atomically thin 2D structure, hydrophilic surface nature, metallic electrical conductivity, and substantial specific surface area. The introduction of carbon guides the assembly of MCCs through electrostatic self-assembly, pairing positively charged carbon with negatively charged MXene. These interactions result in increased interlayer spacing, reduced ion/electron transport distances, and enhanced surface hydrophilicity. Subsequent sections delve into the synthesis methods for MCCs, focusing on MXene integrated with various carbon structures, including 0D, 1D, 2D, and 3D carbon. Comprehensive discussions explore the distinctive properties of MCCs and the unique advantages they offer in each application domain, emphasizing the contributions and advancements they bring to specific fields. Furthermore, this comprehensive review addresses the challenges encountered by MCCs across different applications. Through these analyses, the review promotes a deeper understanding of exceptional characteristics and potential applications of MCCs. Insights derived from this review can serve as guidance for future research and development efforts, promoting the widespread utilization of MCCs across a broad spectrum of disciplines and spurring future innovations.
Collapse
Affiliation(s)
- Balamurugan Muthukutty
- Department of Mechanical Engineering, Gachon University, 1342 Seongnamdaero, Sujeong-gu, Seongnam, Gyeonggi, 13120, Republic of Korea
| | - Ponnaiah Sathish Kumar
- Magnetics Initiative Life Care Research Center, Daegu Gyeongbuk Institute of Science & Technology (DGIST), 333 Techno Jungang-daero, Hyeonpung-myeon, Dalseong-gun, Daegu, 711873, Republic of Korea
| | - Alangadu Kothandan Vivekanandan
- Department of Aeronautical, Annasaheb Dange College of Engineering and Technology, Astha, Sangli district, 416301, Maharastra, India
| | - Mani Sivakumar
- Department of General Pathology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, 77, Tamilnadu, India
| | - Sungwon Lee
- Department of Physics and Chemistry, Daegu Gyeongbuk Institute of Science & Technology (DGIST), 333 Techno Jungang-daero, Hyeonpung-myeon, Dalseong-gun, Daegu, 711873, Republic of Korea.
| | - Daeho Lee
- Department of Mechanical Engineering, Gachon University, 1342 Seongnamdaero, Sujeong-gu, Seongnam, Gyeonggi, 13120, Republic of Korea.
| |
Collapse
|
3
|
Xu X, Jiang Q, Yang C, Ruan J, Zhao W, Wang H, Lu X, Li Z, Chen Y, Zhang C, Hu J, Zhou T. Elastic MXene conductive layers and electrolyte engineering enable robust potassium storage. Chem Sci 2024; 15:3262-3272. [PMID: 38425519 PMCID: PMC10901491 DOI: 10.1039/d3sc06079a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2023] [Accepted: 01/17/2024] [Indexed: 03/02/2024] Open
Abstract
The precisely engineered structures of materials greatly influence the manifestation of their properties. For example, in the process of alkali metal ion storage, a carefully designed structure capable of accommodating inserted and extracted ions will improve the stability of material cycling. The present study explores the uniform distribution of self-grown carbon nanotubes to provide structural support for the conductive and elastic MXene layers of Ti3C2Tx-Co@NCNTs. Furthermore, a compatible electrolyte system has been optimized by analyzing the solvation structure and carefully regulating the component in the solid electrolyte interphase (SEI) layer. Mechanistic studies demonstrate that the decomposition predominantly controlled by FSI- leads to the formation of a robust inorganic SEI layer enriched with KF, thus effectively inhibiting irreversible side reactions and major structural deterioration. Confirming our expectations, Ti3C2Tx-Co@NCNTs exhibits an impressive reversible capacity of 260 mA h g-1, even after 2000 cycles at 500 mA g-1 in 1 M KFSI (DME), surpassing most MXene-based anodes reported for PIBs. Additionally, density functional theory (DFT) calculations verify the superior electronic conductivity and lower K+ diffusion energy barriers of the novel superstructure of Ti3C2Tx-Co@NCNTs, thereby affirming the improved electrochemical kinetics. This study presents systematic evaluation methodologies for future research on MXene-based anodes in PIBs.
Collapse
Affiliation(s)
- Xinyue Xu
- Key Laboratory of Catalysis and Energy Materials Chemistry of Ministry of Education, South-Central Minzu University Wuhan 430074 China
| | - Qingqing Jiang
- Key Laboratory of Catalysis and Energy Materials Chemistry of Ministry of Education, South-Central Minzu University Wuhan 430074 China
| | - Chenyu Yang
- Institutes of Physical Science and Information Technology, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University Hefei 230601 China
| | - Jinxi Ruan
- Institutes of Physical Science and Information Technology, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University Hefei 230601 China
| | - Weifang Zhao
- Key Laboratory of Catalysis and Energy Materials Chemistry of Ministry of Education, South-Central Minzu University Wuhan 430074 China
| | - Houyu Wang
- Institutes of Physical Science and Information Technology, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University Hefei 230601 China
| | - Xinxin Lu
- Institutes of Physical Science and Information Technology, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University Hefei 230601 China
| | - Zhe Li
- Key Laboratory of Catalysis and Energy Materials Chemistry of Ministry of Education, South-Central Minzu University Wuhan 430074 China
| | - Yuanzhen Chen
- State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University Xi'an 710049 China
| | - Chaofeng Zhang
- Institutes of Physical Science and Information Technology, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University Hefei 230601 China
| | - Juncheng Hu
- Key Laboratory of Catalysis and Energy Materials Chemistry of Ministry of Education, South-Central Minzu University Wuhan 430074 China
| | - Tengfei Zhou
- Institutes of Physical Science and Information Technology, Key Laboratory of Structure and Functional Regulation of Hybrid Material (Ministry of Education), Anhui University Hefei 230601 China
| |
Collapse
|
4
|
Kim YB, Seo HY, Kim KH, Cho JS, Kang YC, Park GD. Synthesis of Iron Sulfide Nanocrystals Encapsulated in Highly Porous Carbon-Coated CNT Microsphere as Anode Materials for Sodium-Ion Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2305686. [PMID: 37727094 DOI: 10.1002/smll.202305686] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/06/2023] [Revised: 09/11/2023] [Indexed: 09/21/2023]
Abstract
Highly porous carbon materials with a rationally designed pore structure can be utilized as reservoirs for metal or nonmetal components. The use of small-sized metal or metal compound nanoparticles, completely encapsulated by carbon materials, has attracted significant attention as an effective approach to enhancing sodium ion storage properties. These materials have the ability to mitigate structural collapse caused by volume expansion during the charging process, enable short ion transport length, and prevent polysulfide elution. In this study, a concept of highly porous carbon-coated carbon nanotube (CNT) porous microspheres, which serve as excellent reservoir materials is suggested and a porous microsphere is developed by encapsulating iron sulfide nanocrystals within the highly porous carbon-coated CNTs using a sulfidation process. Furthermore, various sulfidation processes to determine the optimal method for achieving complete encapsulation are investigated by comparing the morphologies of diverse iron sulfide-carbon composites. The fully encapsulated structure, combined with the porous carbon, provides ample space to accommodate the significant volume changes during cycling. As a result, the porous iron sulfide-carbon-CNT composite microspheres exhibited outstanding cycling stability (293 mA h g-1 over 600 cycles at 1 A g-1 ) and remarkable rate capability (100 mA h g-1 at 5 A g-1 ).
Collapse
Affiliation(s)
- Yeong Beom Kim
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, 28644, Republic of Korea
- Department of Materials Science and Engineering, Korea University, Anam-dong, Seongbuk-gu, Seoul, 136-713, Republic of Korea
| | - Hyo Yeong Seo
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, 28644, Republic of Korea
| | - Kyeong-Ho Kim
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
- Department of Materials Science and Engineering, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan, 48513, Republic of Korea
| | - Jung Sang Cho
- Department of Engineering Chemistry, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, 28644, Republic of Korea
| | - Yun Chan Kang
- Department of Materials Science and Engineering, Korea University, Anam-dong, Seongbuk-gu, Seoul, 136-713, Republic of Korea
| | - Gi Dae Park
- Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-gu, Cheongju, 28644, Republic of Korea
| |
Collapse
|
5
|
Bashir T, Zhou S, Yang S, Ismail SA, Ali T, Wang H, Zhao J, Gao L. Progress in 3D-MXene Electrodes for Lithium/Sodium/Potassium/Magnesium/Zinc/Aluminum-Ion Batteries. ELECTROCHEM ENERGY R 2023. [DOI: 10.1007/s41918-022-00174-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/05/2023]
|
6
|
Pan L, Hu R, Zhang Y, Sha D, Cao X, Li Z, Zhao Y, Ding J, Wang Y, Sun Z. Built-In Electric Field-Driven Ultrahigh-Rate K-Ion Storage via Heterostructure Engineering of Dual Tellurides Integrated with Ti 3C 2T x MXene. NANO-MICRO LETTERS 2023; 15:225. [PMID: 37831299 PMCID: PMC10575839 DOI: 10.1007/s40820-023-01202-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/23/2023] [Accepted: 08/26/2023] [Indexed: 10/14/2023]
Abstract
Exploiting high-rate anode materials with fast K+ diffusion is intriguing for the development of advanced potassium-ion batteries (KIBs) but remains unrealized. Here, heterostructure engineering is proposed to construct the dual transition metal tellurides (CoTe2/ZnTe), which are anchored onto two-dimensional (2D) Ti3C2Tx MXene nanosheets. Various theoretical modeling and experimental findings reveal that heterostructure engineering can regulate the electronic structures of CoTe2/ZnTe interfaces, improving K+ diffusion and adsorption. In addition, the different work functions between CoTe2/ZnTe induce a robust built-in electric field at the CoTe2/ZnTe interface, providing a strong driving force to facilitate charge transport. Moreover, the conductive and elastic Ti3C2Tx can effectively promote electrode conductivity and alleviate the volume change of CoTe2/ZnTe heterostructures upon cycling. Owing to these merits, the resulting CoTe2/ZnTe/Ti3C2Tx (CZT) exhibit excellent rate capability (137.0 mAh g-1 at 10 A g-1) and cycling stability (175.3 mAh g-1 after 4000 cycles at 3.0 A g-1, with a high capacity retention of 89.4%). More impressively, the CZT-based full cells demonstrate high energy density (220.2 Wh kg-1) and power density (837.2 W kg-1). This work provides a general and effective strategy by integrating heterostructure engineering and 2D material nanocompositing for designing advanced high-rate anode materials for next-generation KIBs.
Collapse
Affiliation(s)
- Long Pan
- Key Laboratory of Advanced Metallic Materials of Jiangsu Province, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, People's Republic of China
| | - Rongxiang Hu
- Key Laboratory of Advanced Metallic Materials of Jiangsu Province, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, People's Republic of China
| | - Yuan Zhang
- Key Laboratory of Advanced Metallic Materials of Jiangsu Province, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, People's Republic of China
| | - Dawei Sha
- Key Laboratory of Advanced Metallic Materials of Jiangsu Province, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, People's Republic of China
| | - Xin Cao
- Key Laboratory of Advanced Metallic Materials of Jiangsu Province, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, People's Republic of China
| | - Zhuoran Li
- Key Laboratory of Advanced Metallic Materials of Jiangsu Province, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, People's Republic of China
| | - Yonggui Zhao
- Department of Chemistry, University of Zurich, Winterthurerstrasse 190, CH-8057, Zurich, Switzerland
| | - Jiangxiang Ding
- School of Materials Science and Engineering, Anhui University of Technology, Ma'anshan, 243002, Anhui, People's Republic of China
| | - Yaping Wang
- Key Laboratory of Advanced Metallic Materials of Jiangsu Province, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, People's Republic of China.
| | - ZhengMing Sun
- Key Laboratory of Advanced Metallic Materials of Jiangsu Province, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, People's Republic of China.
| |
Collapse
|
7
|
Kong Z, Kaminsky CJ, Groschner CK, Murphy RA, Yu Y, Husremović S, Xie LS, Erodici MP, Kim RS, Yano J, Bediako DK. Near Room-Temperature Intrinsic Exchange Bias in an Fe Intercalated ZrSe 2 Spin Glass. J Am Chem Soc 2023; 145:20041-20052. [PMID: 37646536 PMCID: PMC10510322 DOI: 10.1021/jacs.3c06967] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/01/2023] [Indexed: 09/01/2023]
Abstract
Some magnetic systems display a shift in the center of their magnetic hysteresis loop away from zero field, a phenomenon termed exchange bias. Despite the extensive use of the exchange bias effect, particularly in magnetic multilayers, for the design of spin-based memory/electronics devices, a comprehensive mechanistic understanding of this effect remains a longstanding problem. Recent work has shown that disorder-induced spin frustration might play a key role in exchange bias, suggesting new materials design approaches for spin-based electronic devices that harness this effect. Here, we design a spin glass with strong spin frustration induced by magnetic disorder by exploiting the distinctive structure of Fe intercalated ZrSe2, where Fe(II) centers are shown to occupy both octahedral and tetrahedral interstitial sites and to distribute between ZrSe2 layers without long-range structural order. Notably, we observe behavior consistent with a magnetically frustrated and multidegenerate ground state in these Fe0.17ZrSe2 single crystals, which persists above room temperature. Moreover, this magnetic frustration leads to a robust and tunable exchange bias up to 250 K. These results not only offer important insights into the effects of magnetic disorder and frustration in magnetic materials generally, but also highlight as design strategy the idea that a large exchange bias can arise from an inhomogeneous microscopic environment without discernible long-range magnetic order. In addition, these results show that intercalated TMDs like Fe0.17ZrSe2 hold potential for spintronic technologies that can achieve room temperature applications.
Collapse
Affiliation(s)
- Zhizhi Kong
- Department
of Chemistry, University of California, Berkeley, California 94720, United States
| | - Corey J. Kaminsky
- Molecular
Biophysics and Integrated Bioimaging Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
| | - Catherine K. Groschner
- Department
of Chemistry, University of California, Berkeley, California 94720, United States
| | - Ryan A. Murphy
- Department
of Chemistry, University of California, Berkeley, California 94720, United States
| | - Yun Yu
- Department
of Chemistry, University of California, Berkeley, California 94720, United States
| | - Samra Husremović
- Department
of Chemistry, University of California, Berkeley, California 94720, United States
| | - Lilia S. Xie
- Department
of Chemistry, University of California, Berkeley, California 94720, United States
| | - Matthew P. Erodici
- Department
of Chemistry, University of California, Berkeley, California 94720, United States
| | - R. Soyoung Kim
- Chemical
Sciences Division, Lawrence Berkeley National
Laboratory, Berkeley, California 94720, United States
| | - Junko Yano
- Molecular
Biophysics and Integrated Bioimaging Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
| | - D. Kwabena Bediako
- Department
of Chemistry, University of California, Berkeley, California 94720, United States
- Chemical
Sciences Division, Lawrence Berkeley National
Laboratory, Berkeley, California 94720, United States
| |
Collapse
|
8
|
Guo Y, Du Z, Cao Z, Li B, Yang S. MXene Derivatives for Energy Storage and Conversions. SMALL METHODS 2023; 7:e2201559. [PMID: 36811328 DOI: 10.1002/smtd.202201559] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/24/2022] [Revised: 02/02/2023] [Indexed: 06/18/2023]
Abstract
Associated with the rapid development of 2D transition metal carbides, nitrides, and carbonitrides (MXenes), MXene derivatives have been recently exploited and exhibited unique physical/chemical properties, holding promising applications in the areas of energy storage and conversions. This review provides a comprehensive summarization of the latest research and progress on MXene derivatives, including termination-tailored MXenes, single-atom implanted MXenes, intercalated MXenes, van der Waals atomic layers, and non-van der Waals heterostructures. The intrinsic relationship between structure, properties, and corresponding applications for MXene derivatives are then emphasized. Finally, the essential challenges are addressed and perspectives for the MXene derivatives are also discussed.
Collapse
Affiliation(s)
- Yu Guo
- School of Materials Science and Engineering, Beihang University, Beijing, 100191, China
| | - Zhiguo Du
- School of Materials Science and Engineering, Beihang University, Beijing, 100191, China
| | - Zhenjiang Cao
- School of Materials Science and Engineering, Beihang University, Beijing, 100191, China
| | - Bin Li
- School of Materials Science and Engineering, Beihang University, Beijing, 100191, China
| | - Shubin Yang
- School of Materials Science and Engineering, Beihang University, Beijing, 100191, China
| |
Collapse
|
9
|
Tian X, Zhang P, Liao Y, Soomro RA, Xu B. Achieving Stable and Ultrafast Potassium Storage of Antimony Anode via Dual Confinement of MXene@Carbon Framework. SMALL METHODS 2023; 7:e2201525. [PMID: 36825657 DOI: 10.1002/smtd.202201525] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/19/2022] [Revised: 01/28/2023] [Indexed: 06/18/2023]
Abstract
Antimony-based anode materials are recognized for their high potassium storage capacities and appropriate operating potentials. However, the large volume expansion of Sb during the potassiation/depotassiation process, which results in a quick capacity decay, severely limits its practical application in potassium-ion batteries (PIBs). Here, a carbon-coated Sb/MXene heterostructure composite (CSM) is synthesized by adsorption of Sb3+ on MXene nanosheets via Sb-O-Ti bonds followed by carbothermic reduction to construct dual-confined MXene@carbon conductive framework capable of withstanding high volume expansion of Sb and conducive to enabling accelerated electron transfer kinetics. The CSM composite, particularly CSM-700, when configured as an anode for PIBs, realized high capacity (484.4 mAh g-1 at 0.1 A g-1 ), an ultra-stable cycling performance with a high reversible capacity of 435.9 mAh g-1 at 0.1 A g-1 after 100 cycles corresponding to a capacity retention rate of 90.0%, and superior rate performance of 323.0 mAh g-1 at 1 A g-1 . The proposed strategy offers a simple route to construct high-performance Sb-based anodes for advanced PIBs.
Collapse
Affiliation(s)
- Xue Tian
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Peng Zhang
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Yizhi Liao
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Razium A Soomro
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing, 100029, China
| | - Bin Xu
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing, 100029, China
| |
Collapse
|
10
|
Pabba DP, Satthiyaraju M, Ramasdoss A, Sakthivel P, Chidhambaram N, Dhanabalan S, Abarzúa CV, Morel MJ, Udayabhaskar R, Mangalaraja RV, Aepuru R, Kamaraj SK, Murugesan PK, Thirumurugan A. MXene-Based Nanocomposites for Piezoelectric and Triboelectric Energy Harvesting Applications. MICROMACHINES 2023; 14:1273. [PMID: 37374858 DOI: 10.3390/mi14061273] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/24/2023] [Revised: 06/17/2023] [Accepted: 06/18/2023] [Indexed: 06/29/2023]
Abstract
Due to its superior advantages in terms of electronegativity, metallic conductivity, mechanical flexibility, customizable surface chemistry, etc., 2D MXenes for nanogenerators have demonstrated significant progress. In order to push scientific design strategies for the practical application of nanogenerators from the viewpoints of the basic aspect and recent advancements, this systematic review covers the most recent developments of MXenes for nanogenerators in its first section. In the second section, the importance of renewable energy and an introduction to nanogenerators, major classifications, and their working principles are discussed. At the end of this section, various materials used for energy harvesting and frequent combos of MXene with other active materials are described in detail together with the essential framework of nanogenerators. In the third, fourth, and fifth sections, the materials used for nanogenerators, MXene synthesis along with its properties, and MXene nanocomposites with polymeric materials are discussed in detail with the recent progress and challenges for their use in nanogenerator applications. In the sixth section, a thorough discussion of the design strategies and internal improvement mechanisms of MXenes and the composite materials for nanogenerators with 3D printing technologies are presented. Finally, we summarize the key points discussed throughout this review and discuss some thoughts on potential approaches for nanocomposite materials based on MXenes that could be used in nanogenerators for better performance.
Collapse
Affiliation(s)
- Durga Prasad Pabba
- Departamento de Mecánica, Facultad de Ingeniería, Universidad Tecnologica Metropolitana, Santiago 8330378, Chile
| | - Mani Satthiyaraju
- Department of Mechanical Engineering, Kathir College of Engineering, Coimbatore 641062, India
| | - Ananthakumar Ramasdoss
- School for Advanced Research in Polymers (SARP), Central Institute of Petrochemicals Engineering & Technology (CIPET), T.V.K. Industrial Estate, Guindy, Chennai 600032, India
| | - Pandurengan Sakthivel
- Centre for Materials Science, Department of Physics, Faculty of Engineering, Karpagam Academy of Higher Education, Coimbatore 641021, India
| | - Natarajan Chidhambaram
- Department of Physics, Rajah Serfoji Government College (Autonomous), Thanjavur 613005, India
| | - Shanmugasundar Dhanabalan
- Functional Materials and Microsystems Research Group, RMIT University, Melbourne, VIC 3000, Australia
| | | | - Mauricio J Morel
- Departamento de Química y Biología, Facultad de Ciencias Naturales, Universidad de Atacama, Copiapó 1531772, Chile
| | - Rednam Udayabhaskar
- Departamento de Mecánica, Facultad de Ingeniería, Universidad Tecnologica Metropolitana, Santiago 8330378, Chile
| | | | - Radhamanohar Aepuru
- Departamento de Mecánica, Facultad de Ingeniería, Universidad Tecnologica Metropolitana, Santiago 8330378, Chile
| | - Sathish-Kumar Kamaraj
- Instituto Politécnico Nacional, Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada, Unidad Altamira (CICATA Altamira), Altamira 89600, Mexico
| | | | | |
Collapse
|
11
|
Man Y, Sun J, Zhao X, Duan L, Fei Y, Bao J, Mo X, Zhou X. An ultrastable sodium-ion battery anode enabled by carbon-coated porous NaTi 2(PO 4) 3 olive-like nanospheres. J Colloid Interface Sci 2023; 635:417-426. [PMID: 36599240 DOI: 10.1016/j.jcis.2022.12.155] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2022] [Revised: 12/15/2022] [Accepted: 12/28/2022] [Indexed: 12/31/2022]
Abstract
NaTi2(PO4)3 (NTP) is a promising anode material for sodium-ion batteries (SIBs). It has drawn wide attention because of its stable three-dimensional NASICON-type structure, proper redox potential, and large accommodation space for Na+. However, the inherent low electronic conductivity of the phosphate framework reduces its charge transfer kinetics, thus limiting its exploitation. Therefore, this paper proposes a material with carbon-coated porous NTP olive-like nanospheres (p-NTP@C) to tackle the issues above. Based on experimental data and theoretical calculations, the porous structure of the material is found to be able to provide more active sites and shorten the Na+ diffusion distance. In addition, the carbon coating can effectively improve the electron and Na+ diffusion kinetics. As the anode material for SIBs, the p-NTP@C olive-like nanospheres exhibit a high reversible capacity (127.3 mAh g-1 at 0.1 C) and ultrastable cycling performance (84.8% capacity retention after 10,000 cycles at 5 C). Furthermore, the sodium-ion full cells, composed of p-NTP@C anode and Na3V2(PO4)2F3@carbon cathode, also deliver excellent performance (75.7% capacity retention after 1000 cycles at 1 C). In brief, this nanostructure design provides a viable approach for the future development of long-life and highly stable NASICON-type anode materials.
Collapse
Affiliation(s)
- Yuehua Man
- School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Jianlu Sun
- School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Xuwen Zhao
- Department of Materials Science and Engineering, City University of Hong Kong, Kowloon 999077 Hong Kong Special Administrative Region
| | - Liping Duan
- School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Yating Fei
- School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Jianchun Bao
- School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China
| | - Xiangyin Mo
- School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China.
| | - Xiaosi Zhou
- School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China.
| |
Collapse
|
12
|
Liu Y, Li J, Liu B, Chen Y, Wu Y, Hu X, Zhong G, Yuan J, Chen J, Zhan H, Wen Z. Confined WS 2 Nanosheets Tubular Nanohybrid as High-Kinetic and Durable Anode for Sodium-Based Dual Ion Batteries. CHEMSUSCHEM 2023; 16:e202201200. [PMID: 35916231 DOI: 10.1002/cssc.202201200] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/23/2022] [Revised: 07/22/2022] [Indexed: 06/15/2023]
Abstract
Sodium based dual-ion battery (SDIB) has been regarded as one of the promising batteries technologies thanks to its high working voltage and natural abundance of sodium source, its practical application yet faces critical issues of low capacity and sluggish kinetics of intercalation-type graphite anode. Here, a tubular nanohybrid composed of building blocks of carbon-film wrapped WS2 nanosheets on carbon nanotube (WS2 /C@CNTs) was reported. The expanded (002) interlayer and dual-carbon confined structure endowed WS2 nanosheets with fast charge transportation and excellent structural stability, and thus WS2 /C@CNTs showed highly attractive electrochemical properties for Na+ storage with high reversible capacity, fast kinetic, and robust durability. The full sodium-based dual ion batteries by coupling WS2 /C@CNTs anode with graphite cathode full cell presented a high reversible capacity (210 mAh g-1 at 0.1 A g-1 ), and excellent rate performance with a high capacity of 137 mAh g-1 at 5.0 A g-1 .
Collapse
Affiliation(s)
- YangJie Liu
- CAS Key Laboratory of Design and Assembly of Functional Nanostructures, and Fujian Provincial Key Laboratory of Materials and Techniques toward Hydrogen Energy, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian, 350002, P. R. China
- College of Materials Science and Engineering, Fuzhou University, Fuzhou, 350108, P. R. China
| | - Junwei Li
- Department of Chemical Engineering, KU Leuven, Celestijnenlaan 200F, B-3001, Heverlee, Belgium
| | - Beibei Liu
- CAS Key Laboratory of Design and Assembly of Functional Nanostructures, and Fujian Provincial Key Laboratory of Materials and Techniques toward Hydrogen Energy, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian, 350002, P. R. China
- University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Yuhua Chen
- State Key Laboratory of Space Power-sources Technology, Shanghai Institute of Space Power-Sources, 2965 Dongchuan Road, Shanghai, 200245, P. R. China
| | - Yongmin Wu
- State Key Laboratory of Space Power-sources Technology, Shanghai Institute of Space Power-Sources, 2965 Dongchuan Road, Shanghai, 200245, P. R. China
| | - Xiang Hu
- CAS Key Laboratory of Design and Assembly of Functional Nanostructures, and Fujian Provincial Key Laboratory of Materials and Techniques toward Hydrogen Energy, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian, 350002, P. R. China
| | - Guobao Zhong
- CAS Key Laboratory of Design and Assembly of Functional Nanostructures, and Fujian Provincial Key Laboratory of Materials and Techniques toward Hydrogen Energy, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian, 350002, P. R. China
- College of Materials Science and Engineering, Fuzhou University, Fuzhou, 350108, P. R. China
| | - Jun Yuan
- CAS Key Laboratory of Design and Assembly of Functional Nanostructures, and Fujian Provincial Key Laboratory of Materials and Techniques toward Hydrogen Energy, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian, 350002, P. R. China
- College of Materials Science and Engineering, Fuzhou University, Fuzhou, 350108, P. R. China
| | - Junxiang Chen
- CAS Key Laboratory of Design and Assembly of Functional Nanostructures, and Fujian Provincial Key Laboratory of Materials and Techniques toward Hydrogen Energy, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian, 350002, P. R. China
| | - Hongbing Zhan
- College of Materials Science and Engineering, Fuzhou University, Fuzhou, 350108, P. R. China
| | - Zhenhai Wen
- CAS Key Laboratory of Design and Assembly of Functional Nanostructures, and Fujian Provincial Key Laboratory of Materials and Techniques toward Hydrogen Energy, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian, 350002, P. R. China
| |
Collapse
|
13
|
Liu C, Wang S, Wang N, Yu J, Liu YT, Ding B. From 1D Nanofibers to 3D Nanofibrous Aerogels: A Marvellous Evolution of Electrospun SiO 2 Nanofibers for Emerging Applications. NANO-MICRO LETTERS 2022; 14:194. [PMID: 36161372 PMCID: PMC9511469 DOI: 10.1007/s40820-022-00937-y] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/29/2022] [Accepted: 08/17/2022] [Indexed: 05/14/2023]
Abstract
One-dimensional (1D) SiO2 nanofibers (SNFs), one of the most popular inorganic nanomaterials, have aroused widespread attention because of their excellent chemical stability, as well as unique optical and thermal characteristics. Electrospinning is a straightforward and versatile method to prepare 1D SNFs with programmable structures, manageable dimensions, and modifiable properties, which hold great potential in many cutting-edge applications including aerospace, nanodevice, and energy. In this review, substantial advances in the structural design, controllable synthesis, and multifunctional applications of electrospun SNFs are highlighted. We begin with a brief introduction to the fundamental principles, available raw materials, and typical apparatus of electrospun SNFs. We then discuss the strategies for preparing SNFs with diverse structures in detail, especially stressing the newly emerging three-dimensional SiO2 nanofibrous aerogels. We continue with focus on major breakthroughs about brittleness-to-flexibility transition of SNFs and the means to achieve their mechanical reinforcement. In addition, we showcase recent applications enabled by electrospun SNFs, with particular emphasis on physical protection, health care and water treatment. In the end, we summarize this review and provide some perspectives on the future development direction of electrospun SNFs.
Collapse
Affiliation(s)
- Cheng Liu
- Innovation Center for Textile Science and Technology, College of Textiles, Donghua University, Shanghai, 201620, People's Republic of China
| | - Sai Wang
- Innovation Center for Textile Science and Technology, College of Textiles, Donghua University, Shanghai, 201620, People's Republic of China
| | - Ni Wang
- Innovation Center for Textile Science and Technology, College of Textiles, Donghua University, Shanghai, 201620, People's Republic of China
| | - Jianyong Yu
- Innovation Center for Textile Science and Technology, College of Textiles, Donghua University, Shanghai, 201620, People's Republic of China.
| | - Yi-Tao Liu
- Innovation Center for Textile Science and Technology, College of Textiles, Donghua University, Shanghai, 201620, People's Republic of China
| | - Bin Ding
- Innovation Center for Textile Science and Technology, College of Textiles, Donghua University, Shanghai, 201620, People's Republic of China.
| |
Collapse
|
14
|
Moniruzzaman M, Anil Kumar Y, Pallavolu MR, Arbi HM, Alzahmi S, Obaidat IM. Two-Dimensional Core-Shell Structure of Cobalt-Doped@MnO 2 Nanosheets Grown on Nickel Foam as a Binder-Free Battery-Type Electrode for Supercapacitor Application. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:nano12183187. [PMID: 36144975 PMCID: PMC9505914 DOI: 10.3390/nano12183187] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/25/2022] [Revised: 09/07/2022] [Accepted: 09/09/2022] [Indexed: 05/25/2023]
Abstract
Herein, we present an interfacial engineering strategy to construct an efficient hydrothermal approach by in situ growing cobalt-doped@MnO2 nanocomposite on highly conductive nickel foam (Ni foam) for supercapacitors (SCs). The remarkably high specific surface area of Co dopant provides a larger contacting area for MnO2. In the meantime, the excellent retentions of the hierarchical phase-based pore architecture of the cobalt-doped surface could beneficially condense the electron transportation pathways. In addition, the nickel foam (Ni foam) nanosheets provide charge-transport channels that lead to the outstanding improved electrochemical activities of cobalt-doped@MnO2. The unique cobalt-doped@MnO2 nanocomposite electrode facilitates stable electrochemical architecture, multi-active electrochemical sites, and rapid electro-transports channels; which act as a key factor in enhancing the specific capacitances, stability, and rate capacities. As a result, the cobalt-doped@MnO2 nanocomposite electrode delivered superior electrochemical activities with a specific capacitance of 337.8 F g-1 at 0.5 A g-1; this is greater than pristine MnO2 (277.9 F g-1). The results demonstrate a worthy approach for the designing of high-performance SCs by the grouping of the nanostructured dopant material and metal oxides.
Collapse
Affiliation(s)
- Md Moniruzzaman
- Department of Chemical and Biological Engineering, Gachon University, 1342 Seongnam-daero, Seongnam-si 13120, Gyeonggi-do, Korea
| | - Yedluri Anil Kumar
- Department of Physics, United Arab Emirates University, Al Ain 15551, United Arab Emirates
- National Water and Energy Center, United Arab Emirates University, Al Ain 15551, United Arab Emirates
| | | | - Hammad Mueen Arbi
- Department of Physics, United Arab Emirates University, Al Ain 15551, United Arab Emirates
- National Water and Energy Center, United Arab Emirates University, Al Ain 15551, United Arab Emirates
| | - Salem Alzahmi
- National Water and Energy Center, United Arab Emirates University, Al Ain 15551, United Arab Emirates
- Department of Chemical & Petroleum Engineering, United Arab Emirates University, Al Ain 15551, United Arab Emirates
| | - Ihab M. Obaidat
- Department of Physics, United Arab Emirates University, Al Ain 15551, United Arab Emirates
- National Water and Energy Center, United Arab Emirates University, Al Ain 15551, United Arab Emirates
| |
Collapse
|
15
|
Cheng N, Zhou W, Liu J, Liu Z, Lu B. Reversible Oxygen-Rich Functional Groups Grafted 3D Honeycomb-Like Carbon Anode for Super-Long Potassium Ion Batteries. NANO-MICRO LETTERS 2022; 14:146. [PMID: 35861905 PMCID: PMC9304482 DOI: 10.1007/s40820-022-00892-8] [Citation(s) in RCA: 18] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/24/2022] [Accepted: 06/14/2022] [Indexed: 05/28/2023]
Abstract
Studies have found that oxygen-rich-containing functional groups in carbon-based materials can be used as active sites for the storage performance of K+, but the basic storage mechanism is still unclear. Herein, we construct and optimize 3D honeycomb-like carbon grafted with plentiful COOH/C = O functional groups (OFGC) as anodes for potassium ion batteries. The OFGC electrode with steady structure and rich functional groups can effectively contribute to the capacity enhancement and the formation of stable solid electrolyte interphase (SEI) film, achieving a high reversible capacity of 230 mAh g-1 at 3000 mA g-1 after 10,000 cycles (almost no capacity decay) and an ultra-long cycle time over 18 months at 100 mA g-1. The study results revealed the reversible storage mechanism between K+ and COOH/C = O functional groups by forming C-O-K compounds. Meanwhile, the in situ electrochemical impedance spectroscopy proved the highly reversible and rapid de/intercalation kinetics of K+ in the OFGC electrode, and the growth process of SEI films. In particular, the full cells assembled by Prussian blue cathode exhibit a high energy density of 113 Wh kg-1 after 800 cycles (calculated by the total mass of anode and cathode), and get the light-emitting diodes lamp and ear thermometer running.
Collapse
Affiliation(s)
- Na Cheng
- School of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, People's Republic of China
| | - Wang Zhou
- School of Materials Science and Engineering, Hunan University, Changsha, 410082, People's Republic of China
| | - Jilei Liu
- School of Materials Science and Engineering, Hunan University, Changsha, 410082, People's Republic of China.
| | - Zhigang Liu
- School of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, People's Republic of China.
| | - Bingan Lu
- School of Physics and Electronics, Hunan University, Changsha, 410082, People's Republic of China
| |
Collapse
|
16
|
Zhang R, Tu Q, Li X, Sun X, Liu X, Chen L. Template-Free Preparation of α-Ni(OH)2 Nanosphere as High-Performance Electrode Material for Advanced Supercapacitor. NANOMATERIALS 2022; 12:nano12132216. [PMID: 35808052 PMCID: PMC9267997 DOI: 10.3390/nano12132216] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/26/2022] [Revised: 06/22/2022] [Accepted: 06/24/2022] [Indexed: 02/04/2023]
Abstract
Although it is one of the promising candidates for pseudocapacitance materials, Ni(OH)2 is confronted with poor specific capacitance and inferior cycling stability. The design and construction of three-dimensional (3D) nanosphere structures turns out to be a valid strategy to combat these disadvantages and has attracted tremendous attention. In this paper, a 3D α-Ni(OH)2 nanosphere is prepared via a facile and template-free dynamic refluxing approach. Significantly, the α-Ni(OH)2 nanosphere possesses a high specific surface area (119.4 m2/g) and an abundant porous structure. In addition, the as-obtained α-Ni(OH)2 electrodes are investigated by electrochemical measurements, which exhibit a high specific capacitance of 1243 F/g at 1 A/g in 6 M KOH electrolyte and an acceptable capacitive retention of 40.0% after 1500 charge/discharge cycles at 10 A/g, which can be attributed to the sphere’s unique nanostructure. Furthermore, the as-assembled Ni(OH)2-36//AC asymmetric supercapacitor (ASC) yields a remarkable energy density of 26.50 Wh/kg, with a power density of 0.82 kW/kg. Notably, two ASCs in series can light a 2.5 V red lamp sustainably for more than 60 min, as well as power an LED band with a rated power of 25 W. Hence, this 3D α-Ni(OH)2 nanosphere may raise great potential applications for next-generation energy storage devices.
Collapse
Affiliation(s)
- Rongrong Zhang
- School of Electronic Information Engineering, Jingchu University of Technology, Jingmen 448000, China; (R.Z.); (Q.T.); (X.L.)
| | - Qian Tu
- School of Electronic Information Engineering, Jingchu University of Technology, Jingmen 448000, China; (R.Z.); (Q.T.); (X.L.)
| | - Xianran Li
- School of Electronic Information Engineering, Jingchu University of Technology, Jingmen 448000, China; (R.Z.); (Q.T.); (X.L.)
| | - Xinyu Sun
- School of Electronic Information Engineering, Jingchu University of Technology, Jingmen 448000, China; (R.Z.); (Q.T.); (X.L.)
- Correspondence: (X.S.); (X.L); (L.C.)
| | - Xinghai Liu
- Research Center of Graphic Communication, Printing and Packaging, Wuhan University, Wuhan 430079, China
- Correspondence: (X.S.); (X.L); (L.C.)
| | - Liangzhe Chen
- School of Electronic Information Engineering, Jingchu University of Technology, Jingmen 448000, China; (R.Z.); (Q.T.); (X.L.)
- Correspondence: (X.S.); (X.L); (L.C.)
| |
Collapse
|
17
|
Park HJ, Hong H, Thangam R, Song MG, Kim JE, Jo EH, Jang YJ, Choi WH, Lee MY, Kang H, Lee KB. Static and Dynamic Biomaterial Engineering for Cell Modulation. NANOMATERIALS 2022; 12:nano12081377. [PMID: 35458085 PMCID: PMC9028203 DOI: 10.3390/nano12081377] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/01/2022] [Revised: 03/31/2022] [Accepted: 04/04/2022] [Indexed: 02/01/2023]
Abstract
In the biological microenvironment, cells are surrounded by an extracellular matrix (ECM), with which they dynamically interact during various biological processes. Specifically, the physical and chemical properties of the ECM work cooperatively to influence the behavior and fate of cells directly and indirectly, which invokes various physiological responses in the body. Hence, efficient strategies to modulate cellular responses for a specific purpose have become important for various scientific fields such as biology, pharmacy, and medicine. Among many approaches, the utilization of biomaterials has been studied the most because they can be meticulously engineered to mimic cellular modulatory behavior. For such careful engineering, studies on physical modulation (e.g., ECM topography, stiffness, and wettability) and chemical manipulation (e.g., composition and soluble and surface biosignals) have been actively conducted. At present, the scope of research is being shifted from static (considering only the initial environment and the effects of each element) to biomimetic dynamic (including the concepts of time and gradient) modulation in both physical and chemical manipulations. This review provides an overall perspective on how the static and dynamic biomaterials are actively engineered to modulate targeted cellular responses while highlighting the importance and advance from static modulation to biomimetic dynamic modulation for biomedical applications.
Collapse
Affiliation(s)
- Hyung-Joon Park
- Department of Interdisciplinary Biomicrosystem Technology, College of Engineering, Korea University, Seoul 02841, Korea;
| | - Hyunsik Hong
- Department of Materials Science and Engineering, College of Engineering, Korea University, Seoul 02841, Korea; (H.H.); (R.T.)
| | - Ramar Thangam
- Department of Materials Science and Engineering, College of Engineering, Korea University, Seoul 02841, Korea; (H.H.); (R.T.)
- Institute for High Technology Materials and Devices, Korea University, Seoul 02841, Korea
| | - Min-Gyo Song
- Department of Biomedical Engineering, College of Health Science, Korea University, Seoul 02841, Korea; (M.-G.S.); (W.-H.C.); (M.-Y.L.)
| | - Ju-Eun Kim
- Department of Biomedical Engineering, College of Engineering, Korea University, Seoul 02841, Korea; (J.-E.K.); (E.-H.J.)
| | - Eun-Hae Jo
- Department of Biomedical Engineering, College of Engineering, Korea University, Seoul 02841, Korea; (J.-E.K.); (E.-H.J.)
| | - Yun-Jeong Jang
- Department of Biomedical Engineering, Armour College of Engineering, Illinois Institute of Technology, Chicago, IL 60616, USA;
| | - Won-Hyoung Choi
- Department of Biomedical Engineering, College of Health Science, Korea University, Seoul 02841, Korea; (M.-G.S.); (W.-H.C.); (M.-Y.L.)
| | - Min-Young Lee
- Department of Biomedical Engineering, College of Health Science, Korea University, Seoul 02841, Korea; (M.-G.S.); (W.-H.C.); (M.-Y.L.)
| | - Heemin Kang
- Department of Interdisciplinary Biomicrosystem Technology, College of Engineering, Korea University, Seoul 02841, Korea;
- Department of Materials Science and Engineering, College of Engineering, Korea University, Seoul 02841, Korea; (H.H.); (R.T.)
- Correspondence: (H.K.); (K.-B.L.)
| | - Kyu-Back Lee
- Department of Interdisciplinary Biomicrosystem Technology, College of Engineering, Korea University, Seoul 02841, Korea;
- Department of Biomedical Engineering, College of Health Science, Korea University, Seoul 02841, Korea; (M.-G.S.); (W.-H.C.); (M.-Y.L.)
- Department of Biomedical Engineering, College of Engineering, Korea University, Seoul 02841, Korea; (J.-E.K.); (E.-H.J.)
- Correspondence: (H.K.); (K.-B.L.)
| |
Collapse
|
18
|
Long Z, Shi C, Wu C, Yuan L, Qiao H, Wang K. Heterostructure Fe 2O 3 nanorods@imine-based covalent organic framework for long cycling and high-rate lithium storage. NANOSCALE 2022; 14:1906-1920. [PMID: 35045148 DOI: 10.1039/d1nr07209a] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
Abstract
Fe2O3 as an anode for lithium-ion batteries has attracted intense attention because of its high theoretical capacity, natural abundance, and good safety. However, the inferior cycling stability, low-rate performance, and limited composite varieties hinder the application of Fe2O3-based materials. In this work, an Fe2O3@COF-LZU1 (FO@LZU1) anode was prepared via an imine-based covalent organic framework (COF-LZU1) covering on the exterior surface of Fe2O3 after rational optimization. With its unique heterostructure, the COF-LZU1 layer not only effectively alleviated the volume expansion during cycling but also improved the charge-transfer capability because of the π-conjugated system. Moreover, the organic functional group (CN, benzene ring) for COF-LZU1 provided more redox-active sites for Li+ storage. Under the contributions of both Fe2O3 nanorods and COF-LZU1, the FO@LZU150% exhibited an ultrahigh initial capacity and long-term cycling performance with initial discharge capacities of 2143 and 2171 mA h g-1 after 300 cycles under 0.1 A g-1, and rate performance of 1310 and 501 mA h g-1 at 0.3 and 3 A g-1, respectively. In addition, a high retention capacity of 1185 mA h g-1 was achieved at 1 A g-1 after 500 cycles. Furthermore, a full-cell with the FO@LZU150% anode and LiCoO2 cathode exhibited superior cycling and rate performance, which still maintained a reversible capacity of 260 mA h g-1 after 200 cycles even at a current density of 1 A g-1. The proposed strategy offers a new perspective for exploring the high-rate capability and designability of Fe2O3-based electrode materials.
Collapse
Affiliation(s)
- Zhiwen Long
- Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122, China.
| | - Chu Shi
- Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122, China.
| | - Caiqin Wu
- Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122, China.
| | - Luhan Yuan
- Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122, China.
| | - Hui Qiao
- Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122, China.
| | - Keliang Wang
- Fraunhofer USA, Inc., Center Midwest, Division for Coatings and Diamond Technologies, Michigan State University, East Lansing, MI 48824, USA.
| |
Collapse
|