Zinc Anode for Mild Aqueous Zinc-Ion Batteries: Challenges, Strategies, and Perspectives

Engineering Sb/Zn4(OH)6SO4·5H2O interfacial layer by in situ chemically reacting for stable Zn anode

Rechargeable aqueous zinc ion batteries with abundant resources and high safety have gained extensive attention in energy storage technology. However, the cycle stability is largely limited by notorious Zn dendrite growth and water-induced interfacial side reactions. Here, a uniform and robust protection layer consisting of metal antimony (Sb) nanoparticles and micrometer-size sheets Zn4(OH)6SO4·5H2O (ZHS) is purposely designed to stabilize Zn anode via an in situ chemical reaction strategy. The two-phase protection layers (Sb/ZHS) induce a reinforcement effect on the Zn anode (Zn@Sb/ZHS). Specifically, Sb nanoparticles play the part of nucleation sites to facilitate uniform Zn plating and homogenize the electric field around the Zn surface. ZHS micrometer-size sheets possess sufficient electrolyte wettability, fast ion transfer kinetics, and anti-corrosion, thus guaranteeing uniform ion flux and inhibiting H2O decomposition. As expected, the symmetric Zn@Sb/ZHS//Zn@Sb/ZHS cells achieve a minimal voltage hysteresis and a reversible cycle of over 2000 h at 1 mA cm-2. By pairing with the MnO2 cathode, the full cell exhibits a significantly improved stability (∼94.17 % initial capacity after 1500 cycles). This study provides a new strategy to design artificial protection layers.

Interfacial modulation of nicotinamide additive enables 9700 h Zn metal batteries

Aqueous zinc-ion batteries (AZIBs) have recently been paid great attention due to their robust safety features, high theoretical capacity, and eco-friendliness, yet their practical application is hindered by the serious dendrite formation and side reactions of Zn metal anode during cycling. Herein, a low-cost small molecule, nicotinamide (NIC), is proposed as an electrolyte additive to effectively regulate the Zn interface, achieving a highly reversible and stable zinc anode without dendrites. NIC molecules not only modify the Zn2+ solvation structure but also preferentially adsorb on the Zn surface than solvated H2O to protect the Zn anode and provide numerous nucleation sites for Zn2+ to homogenize Zn deposition. Consequently, the addition of 1 wt% NIC enables Zn||Zn symmetric cells an ultra-long lifespan of over 9700 h at 1 mA cm-2, which expands nearly 808 times compared to that without NIC. The advantages of NIC additives are further demonstrated in NaVO||Zn full cells, which exhibit exceptional capacity retention of 90.3 % after 1000 cycles with a high Coulombic efficiency of 99.9 % at 1 A/g, while the cell operates for only 42 cycles without NIC additive. This strategy presents a promising approach to solving the anode problem, fostering advancements in practical AZIBs.

Advancing Metallic Lithium Anodes: A Review of Interface Design, Electrolyte Innovation, and Performance Enhancement Strategies

Lithium (Li) metal is one of the most promising anode materials for next-generation, high-energy, Li-based batteries due to its exceptionally high specific capacity and low reduction potential. Nonetheless, intrinsic challenges such as detrimental interfacial reactions, significant volume expansion, and dendritic growth present considerable obstacles to its practical application. This review comprehensively summarizes various recent strategies for the modification and protection of metallic lithium anodes, offering insight into the latest advancements in electrode enhancement, electrolyte innovation, and interfacial design, as well as theoretical simulations related to the above. One notable trend is the optimization of electrolytes to suppress dendrite formation and enhance the stability of the electrode-electrolyte interface. This has been achieved through the development of new electrolytes with higher ionic conductivity and better compatibility with Li metal. Furthermore, significant progress has been made in the design and synthesis of novel Li metal composite anodes. These composite anodes, incorporating various additives such as polymers, ceramic particles, and carbon nanotubes, exhibit improved cycling stability and safety compared to pure Li metal. Research has used simulation computing, machine learning, and other methods to achieve electrochemical mechanics modeling and multi-field simulation in order to analyze and predict non-uniform lithium deposition processes and control factors. In-depth investigations into the electrochemical reactions, interfacial chemistry, and physical properties of these electrodes have provided valuable insights into their design and optimization. It systematically encapsulates the state-of-the-art developments in anode protection and delineates prospective trajectories for the technology's industrial evolution. This review aims to provide a detailed overview of the latest strategies for enhancing metallic lithium anodes in lithium-ion batteries, addressing the primary challenges and suggesting future directions for industrial advancement.

Carbonyl Chemistry for Advanced Electrochemical Energy Storage Systems

On the basis of the sustainable concept, organic compounds and carbon materials both mainly composed of light C element have been regarded as powerful candidates for advanced electrochemical energy storage (EES) systems, due to theie merits of low cost, eco-friendliness, renewability, and structural versatility. It is investigated that the carbonyl functionality as the most common constituent part serves a crucial role, which manifests respective different mechanisms in the various aspects of EES systems. Notably, a systematical review about the concept and progress for carbonyl chemistry is beneficial for ensuring in-depth comprehending of carbonyl functionality. Hence, a comprehensive review about carbonyl chemistry has been summarized based on state-of-the-art developments. Moreover, the working principles and fundamental properties of the carbonyl unit have been discussed, which has been generalized in three aspects, including redox activity, the interaction effect, and compensation characteristic. Meanwhile, the pivotal characterization technologies have also been illustrated for purposefully studying the related structure, redox mechanism, and electrochemical performance to profitably understand the carbonyl chemistry. Finally, the current challenges and promising directions are concluded, aiming to afford significant guidance for the optimal utilization of carbonyl moiety and propel practicality in EES systems.

3D MXene/PVA Aerogel Enabling a Dendrite-Free Zn Metal Anode

Aqueous zinc-ion batteries have attracted widespread attention due to their low cost and high safety. Unfortunately, their commercial applications are greatly inhibited by the negative effects of zinc dendrites and side reactions. A solution that utilizes a 3D host can help mitigate these issues. In this paper, we present a 3D host that is composed of an aerogel scaffold with a poly(vinyl alcohol) and MXene structure. The embedded Zn can be densely packed inside the host due to its zincophilic properties. During cycling, the fluorine-based functional groups on the surface of MXene were able to react with the electrolyte to form the ZnF2 solid electrolyte interphase, which can effectively protect the composite anode. As a result, the symmetrical battery was capable of stable cycling for >300 h at a high current density of 10 mA cm-2. More impressively, the assembled full cell retained 93.86% after 800 cycles at a current density of 5 A g-1. This work provides an effective idea for improving the cycling performance of aqueous zinc-ion batteries.

Organic solid-electrolyte interface layers for Zn metal anodes

Zinc ion batteries (ZIBs) have emerged as promising candidates for renewable energy storage owing to their affordability, safety, and sustainability. However, issues with Zn metal anodes, such as dendrite growth, hydrogen evolution reaction (HER), and corrosion, significantly hinder the practical application of ZIBs. To address these issues, organic solid electrolyte interface (SEI) layers have gained traction in the ZIB community as they can, for instance, help achieve uniform Zn plating/stripping and suppress side reactions. This article summarizes recent advances in organic artificial SEI layers for ZIB anodes, including their fabrication methods, electrochemical performance, and degradation suppression mechanisms.

Unlatching the Additional Zinc Storage Ability of Vanadium Nitride Nanocrystallites

Vanadium-based materials, due to their diverse valence states and open-framework lattice, are promising cathodes for aqueous zinc ion batteries (AZIBs), but encounters the major challenges of in situ electrochemical activation process, potent polarity of the aqueous electrolyte and periodic expansion/contraction for efficient Zn2+ storage. Herein, architecting vanadium nitride (VN) nanosheets over titanium-based hollow nanoarrays skeletal host (denoted VNTONC) can simultaneously modulate address those challenges by creating multiple interfaces and maintaining the (1 1 1) phase of VN, which optimizes the Zn2+ storage and the stability of VN. Benefiting from the modulated crystalline thermodynamics during the electrochemical activation of VN, two outcomes are achieved; I) the cathode transforms into a nanocrystalline structure with increased active sites and higher conductivity and; II) a significant portion of the (1 1 1) crystal facets is retained in the process leading to the additional Zn2+ storage capacity. As a result, the as-prepared VNTONC electrode demonstrates remarkable discharge capacities of 802.5 and 331.8 mAh g-1 @ 0.5 and 6.0 A g-1, respectively, due to the enhanced kinetics as validated by theoretical calculations. The assembled VNTONC||Zn flexible ZIB demonstrates excellent Zn storage properties up to 405.6 mAh g-1, and remarkable robustness against extreme operating conditions.

Hetero-Solvation-Diluted Strongly-Coordinated Zn2+-Cosolvent Pairs Downshifting Zn Electrode Potential for High-Voltage Hybrid Batteries

Mild aqueous Zn batteries (AZBs) generally suffer a low-voltage/energy dilemma, which compromises their competitiveness for large-scale energy storage. Pushing Zn anode potential downshift is an admissible yet underappreciated approach for high-voltage/energy AZBs. Herein, with a mild hybrid electrolyte containing in situ-derived diluted strongly-coordinated Zn2+-cosolvent pairs, a considerable Zn anode potential downshift is initially achieved for high-voltage Zn-based hybrid batteries. The chosen butylpyridine cosolvent not only strongly coordinates Zn2+ ions but also acts as a hydrogen-bond end-capping agent to inhibit hydrogen evolution reaction (HER). The electrolyte environment with hetero-solvation-diluted strongly-coordinated Zn2+-cosolvent pairs remarkably lowers Zn2+ activity, responsible for the Zn electrode potential downshift (-0.330 V vs Zn), confirming to modified Nernst law (ΔE =R T n F $\frac{{RT}}{{nF}}$ ln[a(Zn2 + )/a(coordinated solvent)]). With the diluted Zn2+-containing hybrid electrolyte, the Zn//Zn symmetric cell in the hybrid electrolyte shows a long lifespan over 1270 h at a stripping/plating capacity of 0.4 mA h cm-2. Compared with in common hybrid electrolytes, the as-assembled Zn-MnO2 hybrid battery delivers a ca. 0.278 V enhanced voltage plateau (1.57 V) and a long-term cyclability of over 736 cycles. This work opens a new avenue toward Zn anode potential downshift for high-voltage AZBs, which can extend to other mild metal batteries.

Multi-Group Polymer Coating on Zn Anode for High Overall Conversion Efficiency Photorechargeable Zinc-Ion Batteries

The solar-driven photorechargeable zinc-ion batteries have emerged as a promising power solution for smart electronic devices and equipment. However, the subpar cyclic stability of the Zn anode remains a significant impediment to their practical application. Herein, poly(diethynylbenzene-1,3,5-triimine-2,4,6-trione) (PDPTT) was designed as a functional polymer coating of Zn. Theoretical calculations demonstrate that the PDPTT coating not only significantly homogenizes the electric field distribution on the Zn surface, but also promotes the ion-accessible surface of Zn. With multiple N and C=O groups exhibiting strong adsorption energies, this polymer coating reduces the nucleation overpotential of Zn, alters the diffusion pathway of Zn2+ at the anode interface, and decreases the corrosion current and hydrogen evolution current. Leveraging these advantages, Zn-PDPTT//Zn-PDPTT exhibits an exceptionally long cycling time (≥4300 h, 1 mA cm-2). Zn-PDPTT//AC zinc-ion hybrid capacitors can withstand 50,000 cycles at 5 A/g. Zn-PDPTT//NVO zinc-ion battery exhibits a faster charge storage rate, higher capacity, and excellent cycling stability. Coupling Zn-PDPTT//NVO with high-performance perovskite solar cells results in a 13.12 % overall conversion efficiency for the photorechargeable zinc-ion battery, showcasing significant value in advancing the efficiency and upgrading conversion of renewable energy utilization.

Advances of Nanomaterials for High-Efficiency Zn Metal Anodes in Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) have emerged as one of the most promising candidates for next-generation energy storage devices due to their outstanding safety, cost-effectiveness, and environmental friendliness. However, the practical application of zinc metal anodes (ZMAs) faces significant challenges, such as dendrite growth, hydrogen evolution reaction, corrosion, and passivation. Fortunately, the rapid rise of nanomaterials has inspired solutions for addressing these issues associated with ZMAs. Nanomaterials with unique structural features and multifunctionality can be employed to modify ZMAs, effectively enhancing their interfacial stability and cycling reversibility. Herein, an overview of the failure mechanisms of ZMAs is presented, and the latest research progress of nanomaterials in protecting ZMAs is comprehensively summarized, including electrode structures, interfacial layers, electrolytes, and separators. Finally, a brief summary and optimistic perspective are given on the development of nanomaterials for ZMAs. This review provides a valuable reference for the rational design of efficient ZMAs and the promotion of large-scale application of AZIBs.

Zigzag Hopping Site Embedded Covalent Organic Frameworks Coating for Zn Anode

Precise design and tuning of Zn hopping/transfer sites with deeper understanding of the dendrite-formation mechanism is vital in artificial anode protective coating for aqueous Zn-ion batteries (AZIBs). Here, we probe into the role of anode-coating interfaces by designing a series of anhydride-based covalent organic frameworks (i.e., PI-DP-COF and PI-DT-COF) with specifically designed zigzag hopping sites and zincophilic anhydride groups that can serve as desired platforms to investigate the related Zn2+ hopping/transfer behaviours as well as the interfacial interaction. Combining theoretical calculations with experiments, the ABC stacking models of these COFs endow the structures with specific zigzag sites along the 1D channel that can accelerate Zn2+ transfer kinetics, lower surface-energy, homogenize ion-distribution or electric-filed. Attributed to these superiorities, thus-obtained optimal PI-DT-COF cells offer excellent cycling lifespan in both symmetric-cell (2000 cycles at 60 mA cm-2) and full-cell (1600 cycles at 2 A g-1), outperforming almost all the reported porous crystalline materials.

Conformal Engineering of Both Electrodes Toward High-Performance Flexible Quasi-Solid-State Zn-Ion Micro-Supercapacitors

The severe Zn-dendrite growth and insufficient carbon-based cathode performance are two critical issues that hinder the practical applications of flexible Zn-ion micro-ssupercapacitors (FZCs). Herein, a self-adaptive electrode design concept of the synchronous improvement on both the cathode and anode is proposed to enhance the overall performance of FZCs. Polypyrrole doped with anti-expansion graphene oxide and acrylamide (PPy/GO-AM) on the cathode side can exhibit remarkable electrochemical performance, including decent capacitance and cycling stability, as well as exceptional mechanical properties. Meanwhile, a robust protective polymeric layer containing reduced graphene oxide and polyacrylamide is self-assembled onto the Zn surface (rGO/PAM@Zn) at the anode side, by which the "tip effect" of Zn small protuberance can be effectively alleviated, the Zn-ion distribution homogenized, and dendrite growth restricted. Benefiting from these advantages, the FZCs deliver an excellent specific capacitance of 125 mF cm-2 (125 F cm-3) at 1 mA cm-2, along with a maximum energy density of 44.4 µWh cm-2, and outstanding long-term durability with 90.3% capacitance remained after 5000 cycles. This conformal electrode design strategy is believed to enlighten the practical design of high-performance in-plane flexible Zn-based electrochemical energy storage devices (EESDs) by simultaneously tackling the challenges faced by Zn anodes and capacitance-type cathodes.

Industrial Waste Derived Separators for Zn-Ion Batteries Achieve Homogeneous Zn(002) Deposition Through Low Chemical Affinity Effects

Designing a cost-effective and multifunctional separator that ensures dendrite-free and stable Zn metal anode remains a significant challenge. Herein, a multifunctional cellulose-based separator is presented consisting of industrial waste-fly ash particles and cellulose nanofiber using a facile solution-coating method. The resulting fly ash-cellulose (FACNF) separators enable a high ion conductivity (5.76 mS cm-1) and low desolvation energy barrier of hydrated Zn2+. These features facilitate fast ion transfer kinetics and inhibit water-induced side reactions. Furthermore, experimental results and theoretical simulations confirm that the presence of fly ash particles in FACNF separators effectively accommodate the preferential deposition of Zn(002) planes, due to the weak chemical affinity between Zn(002) plane and fly ash, to mitigate dendrite formation and growth. Consequently, the utilization of FACNF separators causes an impressive cycling performance in both Zn||Zn symmetric cells (1600 h at 2 mA cm-2/1 mAh cm-2) and Zn||(NH4)2V10O25 (NVO) full cells (4000 cycles with the capacity retention of 92.1% at 5 A g-1). Furthermore, the assembled pouch cells can steadily support digital thermometer over two months without generating gas and volume expansion. This work provides new insights for achieving crystallographic uniformity in Zn anodes and realizing cost-effective and long-lasting aqueous zinc-ion batteries (AZIBs).

Regulating Zn2+ Migration-Diffusion Behavior by Spontaneous Cascade Optimization Strategy for Long-Life and Low N/P Ratio Zinc Ion Batteries

Parasitic side reactions and dendrite growth on zinc anodes are formidable issues causing limited lifetime of aqueous zinc ion batteries (ZIBs). Herein, a spontaneous cascade optimization strategy is first proposed to regulate Zn2+ migration-diffusion behavior. Specifically, PAPE@Zn layer with separation-reconstruction properties is constructed in situ on Zn anode. In this layer, well-soluble poly(ethylene oxide) (PEO) can spontaneously separation to bulk electrolyte and weaken the preferential coordination between H2O and Zn2+ to achieve primary optimization. Meanwhile, poor-soluble polymerized-4-acryloylmorpholine (PACMO) is reconstructed on Zn anode as hydrophobic flower-like arrays with abundant zincophilic sites, further guiding the de-solvation and homogeneous diffusion of Zn2+ to achieve the secondary optimization. Cascade optimization effectively regulates Zn2+ migration-diffusion behavior, dendrite growth and side reactions of Zn anode are negligible, and the stability is significantly improved. Consequently, symmetrical cells exhibit stability over 4000 h (1 mA cm-2). PAPE@Zn//NH4 +-V2O5 full cells with a high current density of 15 A g-1 maintains 72.2 % capacity retention for 12000 cycles. Even better, the full cell demonstrates excellent performance of cumulative capacity of 2.33 Ah cm-2 at ultra-low negative/positive (N/P) ratio of 0.6 and a high mass-loading (~17 mg cm-2). The spontaneous cascade optimization strategy provides novel path to achieve high-performance and practical ZIBs.

Deeply Discharged, Quiescently Stable, and Long-Life Zn Anode by Spontaneous SEI Formation

Zn ion batteries (ZIBs) are a promising candidate in safe and low-cost large-scale energy storage applications. However, significantly deteriorated cycling stability of Zn anode in high depth of charge or after long-term quiescence impedes the practical application of ZIBs. Aiming at the above issue, a spontaneous solid electrolyte interphase (SEI) formation of Zn4(OH)6SO4·xH2O (ZHS) on Zn powder is achieved in pure ZnSO4 electrolyte by facile and rational interface design. The stable and ultrathin ZHS SEI plays a crucial part in insulating water molecules and conducting Zn2+ ions, intrinsically suppressing the severe hydrogen evolution and dendrite formation on the Zn powder anode. The ZHS-Zn anode delivers a stable cycling at a high DOD of 50% for over 500 h, as well as a lifespan of over 200 h after 40-days of resting at a DOD of 25%. Benefiting from the high utilization of Zn anode, the energy density of the Zn-MnxV2O5 full cell is up to 118 Wh Kg-1. This facile method can fabricate the ZHS-Zn anode as long as 1 m, revealing its feasibility in large-scale production and commercialization.

Achieving High Ionic Conductivity and Mechanical Strength by a Leather Gel Electrolyte for Flexible Zinc-Ion Batteries

The continuous advancement in the field of flexible and wearable electronics has led to increased research interest in safe, low-cost, and flexible zinc-ion batteries, particularly with a focus on flexible electrolytes. In this study, we present a leather gel electrolyte (LGE) that offers robust mechanical properties and an excellent electrochemical performance. LGE exhibits an ionic conductivity of 1.36 × 10-2 S cm-1 and achieves a capacity of 303.7 mAh g-1 in flexible zinc-manganese dioxide batteries. Even after 1000 cycles, the capacity retention remains above 90%, demonstrating outstanding performance in protecting the zinc anode. Furthermore, such a flexible battery shows good resistance to damage due to the strong mechanical strength originating from leather. Notably, LGE utilizes green and sustainable leather as a raw material, making it a promising option for sustainable flexible devices.

Rescuing zinc anode-electrolyte interface: mechanisms, theoretical simulations and in situ characterizations

The research interest in aqueous zinc-ion batteries (AZIBs) has been surging due to the advantages of safety, abundance, and high electrochemical performance. However, some technique issues, such as dendrites, hydrogen evolution reaction, and corrosion, severely prohibit the development of AZIBs in practical utilizations. The underlying mechanisms regarding electrochemical performance deterioration and structure degradation are too complex to understand, especially when it comes to zinc metal anode-electrolyte interface. Recently, theoretical simulations and in situ characterizations have played a crucial role in AZIBs and are exploited to guide the research on electrolyte engineering and solid electrolyte interphase. Herein, we present a comprehensive review of the current state of the fundamental mechanisms involved in the zinc plating/stripping process and underscore the importance of theoretical simulations and in situ characterizations in mechanism research. Finally, we summarize the challenges and opportunities for AZIBs in practical applications, especially as a stationary energy storage and conversion device in a smart grid.

Towards Superior Aqueous Zinc-Ion Batteries: The Insights of Artificial Protective Interfaces

Aqueous zinc ion batteries (AZIBs) with metallic Zn anode have the potential for large-scale energy storage application due to their cost-effectiveness, safety, environmental-friendliness, and ease of preparation. However, the concerns regarding dendrite growth and side reactions on Zn anode surface hamper the commercialization of AZIBs. This review aims to give a comprehensive evaluation of the protective interphase construction and provide guidance to further improve the electrochemical performance of AZIBs. The failure behaviors of the Zn metal anode including dendrite growth, corrosion, and hydrogen evolution are analyzed. Then, the applications and mechanisms of the constructed interphases are introduced, which are classified by the material species. The fabrication methods of the artificial interfaces are summarized and evaluated, including the in-situ strategy and ex-situ strategy. Finally, the characterization means are discussed to give a full view for the study of Zn anode protection. Based on the analysis of this review, a stable and high-performance Zn anode could be designed by carefully choosing applied material, corresponding protective mechanism, and appropriate construction technique. Additionally, this review for Zn anode modification and construction techniques for anode protection in AZIBs may be helpful in other aqueous metal batteries with similar problems.

Positively Charged Amino Acid-Modulated Interfacial Chemistry and Deposition Textures for Highly Reversible Zinc Anodes

Interfacial active water molecule-induced parasitic reactions and stochastic Zn2+ transport-caused dendrite issue significantly impede the implementation of aqueous Zn-ion batteries. Herein, three positively charged amino acids, namely arginine, histidine, and lysine, were utilized as adsorption-type electrolyte additives to enhance the stability and reversibility of Zn anodes. Combined theoretical and experimental analyses verified that these amino acid cations can synergistically modulate the interfacial microenvironment and promote orientational Zn deposition. The adsorbed amino acid cations reconfigured the interfacial electric double layer structure, forming SO42-- and H2O-poor interfaces, thereby retarding hydrogen evolution and corrosion side reactions. Simultaneously, the preferential adsorption of the amino acid cations at specific facets induced crystallographic orientational Zn deposition along unterminated facets. Three deposition architectures, namely planar texture, subvertical alignment, and vertical erection, were obtained, all effectively inhibiting dendrite formation. Consequently, symmetric cells with the three amino acid cations exhibited high stripping/plating reversibility of over 2000 cycles at 5 mA cm-2. Moreover, MnO2-based full cells exhibited markedly improved stabilities compared with their additive-free counterparts.

Synergy of Dendrites-Impeded Atomic Clusters Dissociation and Side Reactions Suppressed Inert Interface Protection for Ultrastable Zn Anode

The sluggish ions-transfer and inhomogeneous ions-nucleation induce the formation of randomly oriented dendrites on Zn anode, while the chemical instability at anode-electrolyte interface triggers detrimental side reactions. Herein, this report in situ designs a multifunctional hybrid interphase of Bi/Bi2O3, for the first time resulting in a novel synergistic regulation mechanism involving: (i) chemically inert interface protection mechanism suppresses side reactions; and more fantastically, (ii) innovative thermodynamically favorable Zn atomic clusters dissociation mechanism impedes dendrites formation. Assisted by collaborative modulation behavior, the Zn@Bi/Bi2O3 symmetry cell delivers an ultrahigh cumulative plating capacity of 1.88 Ah cm-2 at 5 mA cm-2 and ultralong lifetimes of 300 h even at high current density and depth of discharge (10 mA cm-2, DODZn: 60%). Furthermore, under a low electrolyte-to-capacity ratio (E/C: 45 µL mAh-1) and negative-to-positive capacity ratio (N/P: 6.3), Zn@Bi/Bi2O3||MnO2 full-cell exhibits a superior capacity retention of 86.7% after 500 cycles at 1 A g-1, which outperforms most existing interphases. The scaled-up Zn@Bi/Bi2O3||MnO2 battery module (6 V, 1 Ah), combined with the photovoltaic panel, presents excellent renewable-energy storage ability and long output lifetime (12 h). This work provides a fantastic synergistic mechanism to achieve the ultrastable Zn anode and can be greatly promised to apply it into other metal-based batteries.

Achievement of Efficient and Stable Nonflow Zinc-Bromine Batteries Assisted by Rational Decoration upon the Two Electrodes

Aqueous zinc-bromine batteries (ZBBs) are highly promising because of the advantages of safety and cost. Compared with flow ZBBs, static ones without the assistance of pumping and tank components possess decreased cost and increased energy density and efficiency. Yet, the issues of Zn dendrites and shuttle effect of polybromide ions (Brn-) are more serious in nonflow ZBBs. Meanwhile, the hydrogen evolution reaction (HER) and the sluggish kinetics of the Br2/Br- couple are also in-negligible. Herein, a compressive approach, the cation-exchange membrane (CEM) coating on Zn anodes and N-defect decoration toward carbon felt cathodes, is developed. The CEM with cation-only function can inhibit the formation of Zn dendrites via tuning the Zn2+ flow at the interface, block the noncationic substances, and hence prevent the shuttle of Br2/Brn- and the water decomposition-concerned HER. The optimized nonflow ZBBs can deliver high Coulombic, voltage, and energy efficiencies of 94.1, 92.8, and 87.4%, respectively, which can be well remained in 1000 cycles. Meanwhile, the output voltage is as high as 1.7 V at 10 mA cm-2 with a high areal capacity of 2 mA h cm-2, and a LED with a rated voltage of 1.6 V can be powered successfully, exhibiting high application value.

Electrochemical coupling in subnanometer pores/channels for rechargeable batteries

Subnanometer pores/channels (SNPCs) play crucial roles in regulating electrochemical redox reactions for rechargeable batteries. The delicately designed and tailored porous structure of SNPCs not only provides ample space for ion storage but also facilitates efficient ion diffusion within the electrodes in batteries, which can greatly improve the electrochemical performance. However, due to current technological limitations, it is challenging to synthesize and control the quality, storage, and transport of nanopores at the subnanometer scale, as well as to understand the relationship between SNPCs and performances. In this review, we systematically classify and summarize materials with SNPCs from a structural perspective, dividing them into one-dimensional (1D) SNPCs, two-dimensional (2D) SNPCs, and three-dimensional (3D) SNPCs. We also unveil the unique physicochemical properties of SNPCs and analyse electrochemical couplings in SNPCs for rechargeable batteries, including cathodes, anodes, electrolytes, and functional materials. Finally, we discuss the challenges that SNPCs may face in electrochemical reactions in batteries and propose future research directions.

The Construction of Anion-Induced Solvation Structures in Low-concentration Electrolyte for Stable Zinc Anodes

Aqueous zinc-ion batteries (ZIBs) are promising large-scale energy storage devices because of their low cost and high safety. However, owing to the high activity of H2O molecules in electrolytes, hydrogen evolution reaction and side reactions usually take place on Zn anodes. Herein, additive-free PCA-Zn electrolyte with capacity of suppressing the activity of free and solvated H2O molecules was designed by selecting the cationophilic and solventophilic anions. In such electrolyte, contact ion-pairs and solvent-shared ion-pairs were achieved even at low concentration, where PCA- anions coordinate with Zn2+ and bond with solvated H2O molecules. Simultaneously, PCA- anions also induce the construction of H-bonds between free H2O molecules and them. Therefore, the activity of free and solvated H2O molecules is effectively restrained. Furthermore, since PCA- anions possess a strong affinity with metal Zn, they can also adsorb on Zn anode surface to protect Zn anode from the direct contact of H2O molecules, inhibiting the occurrence of water-triggered side reactions. As a result, plating/stripping behavior of Zn anodes is highly reversible and the coulombic efficiency can reach to 99.43 % in PCA-Zn electrolyte. To illustrate the feasibility of PCA-Zn electrolyte, the Zn||PANI full batteries were assembled based on PCA-Zn electrolyte and exhibited enhanced cycling performance.

Water and Salt Concentration-Dependent Electrochemical Performance of Hydrogel Electrolytes in Zinc-Ion Batteries

Zinc-ion batteries (ZIBs) are promising energy storage devices with safe, nonflammable electrolytes and abundant, low-cost electrode materials. Their practical applications are hampered by various water-related undesirable reactions, such as the hydrogen evolution reaction (HER), corrosion of zinc metal, and water-induced decay of cathode materials. Polymer hydrogel electrolytes were used to control these reactions. However, salt, water, and polymeric backbones intervene in polymer hydrogels, and currently, there are no systematic studies on how salt and water concentrations synergistically affect polymer hydrogels' electrochemical performance. Here, we used an in situ polymerization method to synthesize polyacrylamide (PAM) hydrogels with varied Zn(ClO4)2 (0.5 to 2.0 mol kg-1) and water (40 to 90 wt %) concentrations. Their electrochemical performances in Zn||Ti half-cells, Zn||Zn symmetrical cells, and Zn||V2O5 full cells have been comprehensively evaluated. Although the ionic conductivity of electrolytes increases with the salt concentration, a high salt concentration of 2.0 mol kg-1 with more Zn2+ solvated H2O would induce more severe HER and Zn corrosion at the electrolyte/electrode interfaces. A narrow window of the water concentration at 70-80 wt % is optimal to balance needs for achieving a high ionic conductivity and restricting water-related undesirable reactions. The chemically more active water counts roughly 64.1-73.1 wt % of the total water in electrolytes. PAM hydrogel electrolyte with 1.0 mol kg-1 Zn(ClO4)2 and 80 wt % water enables 1200 h of stable cycling in a Zn||Zn symmetric cell and 99.24% of Coulombic efficiency in a Zn||Ti half-cell. Due to the water-induced decay of V2O5, the electrolyte with 70 wt % water delivers the best performance in a Zn||V2O5 full cell, which can retain 73.7% of its initial capacity after 400 charge/discharge cycles. Our results show that achieving precise control of salt and water concentrations of hydrogel electrolytes in their optimal windows to reduce the fraction of chemically more active water while retaining high ionic conductivity is essential to enabling high-performance ZIBs.

Construction of Selective Ion Transport Polymer at Anode-Electrolyte Interface for Stable Aqueous Zinc-Ion Batteries

Rampant dendrite formation and serious adverse parasitic reactions induced by migration of dissolved V/Mn cathode ions on Zn anode have hampered the high performance of aqueous zinc-ion batteries (AZIBs). Inspired by the coordination chemistry between functional groups of polymer and electrolyte ions, a freestanding layer consisting of dopamine-functionalized polypyrrole (DA-PPy) nanowires served as a selective ion transport layer at the anode-electrolyte interface to address these two issues, which could simultaneously avoid polarization caused by the introduction of an additional interface. On the one hand, the DA-PPy layer displays excellent zinc ion and charge transfer ability, as well as provides chemical homochanneling for zinc ions at the interface, which endow the DA-PPy layer with properties as a chemical guider and physical barrier for dendrite inhibition. On the other hand, the DA-PPy layer can trap excess transition metal ions fleeing from the cathodes, thus serving as a chemical barrier, preventing the formation of Vx+/Mnx+-passivation on the surface of the zinc anode. Consequently, the AZIBs based on V2O5 and MnO2 cathodes involving the DA-PPy functional layer show a great improvement in the capacity retention.

For Zinc Metal Batteries, How Many Electrons go to Hydrogen Evolution? An Electrochemical Mass Spectrometry Study

Despite the advantages of aqueous zinc (Zn) metal batteries (AZMB) like high specific capacity (820 mAh g-1 and 5,854 mAh cm-3 ), low redox potential (-0.76 V vs. the standard hydrogen electrode), low cost, water compatibility, and safety, the development of practically relevant batteries is plagued by several issues like unwanted hydrogen evolution reaction (HER), corrosion of Zn substrate (insulating ZnO, Zn(OH)2 , Zn(SO4 )x (OH)y , Zn(ClO4 )x (OH)y etc. passivation layer), and dendrite growth. Controlling and suppressing HER activity strongly correlates with the long-term cyclability of AZMBs. Therefore, a precise quantitative technique is needed to monitor the real-time dynamics of hydrogen evolution during Zn electrodeposition. In this study, we quantify hydrogen evolution using in situ electrochemical mass spectrometry (ECMS). This methodology enables us to determine a correction factor for the faradaic efficiency of this system with unmatched precision. For instance, during the electrodeposition of zinc on a copper substrate at a current density of 1.5 mA/cm2 for 600 seconds, 0.3 % of the total charge is attributed to HER, while the rest contributes to zinc electrodeposition. At first glance, this may seem like a small fraction, but it can be detrimental to the long-term cycling performance of AZMBs. Furthermore, our results provide insights into the correlation between HER and the porous morphology of the electrodeposited zinc, unravelling the presence of trapped H2 and Zn corrosion during the charging process. Overall, this study sets a platform to accurately determine the faradaic efficiency of Zn electrodeposition and provides a powerful tool for evaluating electrolyte additives, salts, and electrode modifications aimed at enhancing long-term stability and suppressing the HER in aqueous Zn batteries.

Critical Solvation Structures Arrested Active Molecules for Reversible Zn Electrochemistry

Aqueous Zn-ion batteries (AZIBs) have attracted increasing attention in next-generation energy storage systems due to their high safety and economic. Unfortunately, the side reactions, dendrites and hydrogen evolution effects at the zinc anode interface in aqueous electrolytes seriously hinder the application of aqueous zinc-ion batteries. Here, we report a critical solvation strategy to achieve reversible zinc electrochemistry by introducing a small polar molecule acetonitrile to form a "catcher" to arrest active molecules (bound water molecules). The stable solvation structure of [Zn(H2O)6]2+ is capable of maintaining and completely inhibiting free water molecules. When [Zn(H2O)6]2+ is partially desolvated in the Helmholtz outer layer, the separated active molecules will be arrested by the "catcher" formed by the strong hydrogen bond N-H bond, ensuring the stable desolvation of Zn2+. The Zn||Zn symmetric battery can stably cycle for 2250 h at 1 mAh cm-2, Zn||V6O13 full battery achieved a capacity retention rate of 99.2% after 10,000 cycles at 10 A g-1. This paper proposes a novel critical solvation strategy that paves the route for the construction of high-performance AZIBs.

Two Birds with One Stone: V4 C3 MXene Synergistically Promoted VS2 Cathode and Zinc Anode for High-Performance Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are considered to be a rising star in the large-scale energy storage area because of their low cost and environmental friendliness properties. However, the limited electrochemical performance of the cathode and severe zinc dendrite of the anode severely hinder the practical application of AZIBs. Herein, a novel 3D interconnected VS2 ⊥V4 C3 Tx heterostructure material is prepared via one-step solvothermal method. Morphological and structural characterizations show that VS2 nanosheets are uniformly and dispersedly distributed on the surface of the V4 C3 MXene substrate, which can effectively suppress volume change of the VS2 . Owing to the open heterostructure along with the high conductivity of V4 C3 MXene, the VS2 ⊥V4 C3 Tx cathode shows a high specific capacity of 273.9 mAh g-1 at 1 A g-1 and an excellent rate capability of 143.2 mAh g-1 at 20 A g-1 . The V4 C3 MXene can also effectively suppress zinc dendrite growth when used as protective layer for the Zn anode, making the V4 C3 Tx @Zn symmetric cell with a stable voltage profile for ≈1700 h. Benefitting from the synergistic modification effect of V4 C3 MXene on both the cathode and anode, the VS2 ⊥V4 C3 Tx ||V4 C3 Tx @Zn battery exhibits a long cycling lifespan of 5000 cycles with a capacity of 157.1 mAh g-1 at 5A g-1 .

A Multifunctional Zwitterion Electrolyte Additive for Highly Reversible Zinc Metal Anode

Although zinc metal anode is promising for zinc-ion batteries (ZIBs) owing to high energy density, its reversibility is significantly obstructed by uncontrolled dendrite growth and parasitic reactions. Optimizing electrolytes is a facile yet effective method to simultaneously address these issues. Herein, 2-(N-morpholino)ethanesulfonic acid (MES), a pH buffer as novel additive, is initially introduced into conventional ZnSO4 electrolyte to ensure a dendrite-free zinc anode surface, enabling a stable Zn/electrolyte interface, which is achieved by controlling the solvated sheath through H2O poor electric double layer (EDL) derived from zwitterionic groups. Moreover, this zwitterionic additive can balance localized H+ concentration of the electrolyte system, thus preventing parasitic reactions in damaging electrodes. DFT calculation proves that the MES additive has a strong affinity with Zn2+ and induces uniform deposition along (002) orientation. As a result, the Zn anode in MES-based electrolyte exhibits exceptional plating/stripping lifespan with 1600 h at 0.5 mA cm-2 (0.5 mAh cm-2) and 430 h at 5.0 mA cm-2 (5.0 mAh cm-2) while it maintains high coulombic efficiency of 99.8%. This work proposes an effective and facile approach for designing dendrite-free anode for future aqueous Zn-based storage devices.

Weakly Polarized Organic Cation-Modified Hydrated Vanadium Oxides for High-Energy Efficiency Aqueous Zinc-Ion Batteries

Vanadium oxides, particularly hydrated forms like V2O5·nH2O (VOH), stand out as promising cathode candidates for aqueous zinc ion batteries due to their adjustable layered structure, unique electronic characteristics, and high theoretical capacities. However, challenges such as vanadium dissolution, sluggish Zn2+ diffusion kinetics, and low operating voltage still hinder their direct application. In this study, we present a novel vanadium oxide ([C6H6N(CH3)3]1.08V8O20·0.06H2O, TMPA-VOH), developed by pre-inserting trimethylphenylammonium (TMPA+) cations into VOH. The incorporation of weakly polarized organic cations capitalizes on both ionic pre-intercalation and molecular pre-intercalation effects, resulting in a phase and morphology transition, an expansion of the interlayer distance, extrusion of weakly bonded interlayer water, and a substantial increase in V4+ content. These modifications synergistically reduce the electrostatic interactions between Zn2+ and the V-O lattice, enhancing structural stability and reaction kinetics during cycling. As a result, TMPA-VOH achieves an elevated open circuit voltage and operation voltage, exhibits a large specific capacity (451 mAh g-1 at 0.1 A g-1) coupled with high energy efficiency (89%), the significantly-reduced battery polarization, and outstanding rate capability and cycling stability. The concept introduced in this study holds great promise for the development of high-performance oxide-based energy storage materials.

Thioacetamide Additive Homogenizing Zn Deposition Revealed by In Situ Digital Holography for Advanced Zn Ion Batteries

Zinc ion batteries are considered as potential energy storage devices due to their advantages of low-cost, high-safety, and high theoretical capacity. However, dendrite growth and chemical corrosion occurring on Zn anode limit their commercialization. These problems can be tackled through the optimization of the electrolyte. However, the screening of electrolyte additives using normal electrochemical methods is time-consuming and labor-intensive. Herein, a fast and simple method based on the digital holography is developed. It can realize the in situ monitoring of electrode/electrolyte interface and provide direct information concerning ion concentration evolution of the diffusion layer. It is effective and time-saving in estimating the homogeneity of the deposition layer and predicting the tendency of dendrite growth, thus able to value the applicability of electrolyte additives. The feasibility of this method is further validated by the forecast and evaluation of thioacetamide additive. Based on systematic characterization, it is proved that the introduction of thioacetamide can not only regulate the interficial ion flux to induce dendrite-free Zn deposition, but also construct adsorption molecule layers to inhibit side reactions of Zn anode. Being easy to operate, capable of in situ observation, and able to endure harsh conditions, digital holography method will be a promising approach for the interfacial investigation of other battery systems.

Layered Topological Insulator MnBi2Te4 as a Cathode for a High Rate Performance Aqueous Zinc-Ion Battery

Recently, the topological insulator MnBi2Te4 has aroused great attention owing to its exotic quantum phenomena and intriguing device applications, but the superior performances of MnBi2Te4 have not been researched in the field of electrochemistry. By theoretical calculations, it is found that MnBi2Te4 exhibits excellent Zn2+ storage and transport properties. Therefore, it is speculated that MnBi2Te4 has excellent electrochemical performance in zinc-ion batteries (ZIBs). In this research, MnBi2Te4 as a pioneer has been explored in ZIBs, showing surprising electrochemical properties. The MnBi2Te4 electrode displays a high average discharge specific capacity (264.8 mA h g-1 at 0.40 A g-1), a competitive cycle life (88.6% of initial capacity after 400 cycles at 4.00 A g-1), and an excellent rate performance (average capacity retention rate of 95.1% from 0.40 to 8.00 A g-1) owing to the fast ion transport of the conductive topological surface state and dissipationless channel of the edge state. Surprisingly, the quasi-solid-state (QSS) MnBi2Te4/Zn battery delivers excellent Zn2+ storage capability and possesses a capacity retention of 79.9% after 1000 cycles at 4.00 A g-1. In addition, the QSS MnBi2Te4/Zn battery can exhibit excellent performance and the GCD curves maintain stability without distortion deformation even at temperatures of 0 and 75 °C.

Fundamental Understanding of Hydrogen Evolution Reaction on Zinc Anode Surface: A First-Principles Study

Hydrogen evolution reaction (HER) has become a key factor affecting the cycling stability of aqueous Zn-ion batteries, while the corresponding fundamental issues involving HER are still unclear. Herein, the reaction mechanisms of HER on various crystalline surfaces have been investigated by first-principle calculations based on density functional theory. It is found that the Volmer step is the rate-limiting step of HER on the Zn (002) and (100) surfaces, while, the reaction rates of HER on the Zn (101), (102) and (103) surfaces are determined by the Tafel step. Moreover, the correlation between HER activity and the generalized coordination number ([Formula: see text]) of Zn at the surfaces has been revealed. The relatively weaker HER activity on Zn (002) surface can be attributed to the higher [Formula: see text] of surface Zn atom. The atomically uneven Zn (002) surface shows significantly higher HER activity than the flat Zn (002) surface as the [Formula: see text] of the surface Zn atom is lowered. The [Formula: see text] of surface Zn atom is proposed as a key descriptor of HER activity. Tuning the [Formula: see text] of surface Zn atom would be a vital strategy to inhibit HER on the Zn anode surface based on the presented theoretical studies. Furthermore, this work provides a theoretical basis for the in-depth understanding of HER on the Zn surface.

Precipitated Iodine Cathode Enabled by Trifluoromethanesulfonate Oxidation for Cathode/Electrolyte Mutualistic Aqueous Zn-I Batteries

Aqueous Zn-I batteries hold great potential for high-safety and sustainable energy storage. However, the iodide shuttling effect and the hydrogen evolution reaction that occur in the aqueous electrolyte remain the main obstacles for their further development. Herein, the design of a cathode/electrolyte mutualistic aqueous (CEMA) Zn-I battery based on the inherent oxidation ability of aqueous trifluoromethanesulfonate ((OTf)- ) electrolyte toward triiodide species is presented. This results in the formation of iodine sediment particles assembled by fine iodine nanocrystals (≈10 nm). An iodine host cathode with high areal iodine loading is realized via a spontaneous absorption process that enriched redox-active iodine and iodide species from aqueous electrolyte onto nanoporous carbon based current collector. By tuning iodide redox process and suppressing competitive hydrogen evolution reaction, the assembled CEMA Zn-I batteries demonstrate a remarkable capacity retention of 76.9% over 1000 cycles at 0.5 mA cm-2 . Moreover, they exhibit a notable rate capability, with a capacity retention of 74.6% when the current density is increased from 0.5 to 5.0 mA cm-2 . This study demonstrates the feasibility of using the oxidation effect to repel redox-active species from the electrolyte to the cathode, paving a new avenue for high-performance aqueous Zn-I batteries.

Rechargeable Aqueous Zinc-Halogen Batteries: Fundamental Mechanisms, Research Issues, and Future Perspectives

Aqueous zinc-halogen batteries (AZHBs) have emerged as promising candidates for energy storage applications due to their high security features and low cost. However, several challenges including natural subliming, sluggish reaction kinetics, and shuttle effect of halogens, as well as dendrite growth of the zinc (Zn) anode, have hindered their large-scale commercialization. In this review, first the fundamental mechanisms and scientific issues associated with AZHBs are summarized. Then the research issues and progresses related to the cathode, separator, anode, and electrolyte are discussed. Additionally, emerging research opportunities in this field is explored. Finally, ideas and prospects for the future development of AZHBs are presented. The objective of this review is to stimulate further exploration, foster the advancement of AZHBs, and contribute to the diversified development of electrochemical energy storage.

A Fluorinated Solid-state-electrolyte Interface Layer Guiding Fast Zinc-ion Oriented Deposition in Aqueous Zinc-ion Batteries

Aqueous zinc ion batteries are gaining popularity due to their high energy density and environmental friendliness. However, random deposition of zinc ions on the anode and sluggish migration of zinc ions on the interface would lead to the growth of zinc dendrites and poor cycling performance. To address these challenges, we developed a fluorinated solid-state-electrolyte interface layer composed of Ca5 (PO4 )3 F/Zn3 (PO4 )2 via an in situ ion exchange strategy to guide zinc-ion oriented deposition and fast zinc ion migration on the anode during cycling. The introduction of Ca5 (PO4 )3 F (FAP) can increase the nucleation sites of zinc ions and guide the oriented deposition of zinc ions along the (002) crystal plane, while the in situ formation of Zn3 (PO4 )2 during cycling can accelerate the migration of zinc ions. Benefited from our design, the assembled Zn//V2 O5  ⋅ H2 O batteries based on FAP-protected Zn anode (FAP-Zn) achieve a higher capacity retention of 84 % (220 mAh g-1 ) than that of bare-Zn based batteries, which have a capacity retention of 23 % (97 mAh g-1 ) at 3.0 A g-1 after 800 cycles. This work provides a new solution for the rational design and development of the solid-state electrolyte interface layer to achieve high-performance zinc-ion batteries.

Alkaline Ni-Zn Rechargeable Batteries for Sustainable Energy Storage: Battery Components, Deterioration Mechanisms, and Impact of Additives

The demand for long-term, sustainable, and low-cost battery energy storage systems with high power delivery capabilities for stationary grid-scale energy storage, as well as the necessity for safe lithium-ion battery alternatives, has renewed interest in aqueous zinc-based rechargeable batteries. The alkaline Ni-Zn rechargeable battery chemistry was identified as a promising technology for sustainable energy storage applications, albeit a considerable investment in academic research, it still fails to deliver the requisite performance. It is hampered by a relatively short-term electrode degradation, resulting in a decreased cycle life. Dendrite formation, parasitic hydrogen evolution, corrosion, passivation, and dynamic morphological growth are all challenging and interrelated possible degradation processes. This review elaborates on the components of Ni-Zn batteries and their deterioration mechanisms, focusing on the influence of electrolyte additives as a cost-effective, simple, yet versatile approach for regulating these phenomena and extending the battery cycle life. Even though a great deal of effort has been dedicated to this subject, the challenges remain. This highlights that a breakthrough is to be expected, but it will necessitate not only an experimental approach, but also a theoretical and computational one, including artificial intelligence (AI) and machine learning (ML).

ZnO Additive Boosts Charging Speed and Cycling Stability of Electrolytic Zn-Mn Batteries

Electrolytic aqueous zinc-manganese (Zn-Mn) batteries have the advantage of high discharge voltage and high capacity due to two-electron reactions. However, the pitfall of electrolytic Zn-Mn batteries is the sluggish deposition reaction kinetics of manganese oxide during the charge process and short cycle life. We show that, incorporating ZnO electrolyte additive can form a neutral and highly viscous gel-like electrolyte and render a new form of electrolytic Zn-Mn batteries with significantly improved charging capabilities. Specifically, the ZnO gel-like electrolyte activates the zinc sulfate hydroxide hydrate assisted Mn2+ deposition reaction and induces phase and structure change of the deposited manganese oxide (Zn2Mn3O8·H2O nanorods array), resulting in a significant enhancement of the charge capability and discharge efficiency. The charge capacity increases to 2.5 mAh cm-2 after 1 h constant-voltage charging at 2.0 V vs. Zn/Zn2+, and the capacity can retain for up to 2000 cycles with negligible attenuation. This research lays the foundation for the advancement of electrolytic Zn-Mn batteries with enhanced charging capability.

Preferred Orientation Deposition via Multifunctional Gel Electrolyte with Molecular Anchor Enabling Highly Reversible Zn Anode

The high activity of water molecules results in a series of awful parasitic reaction, which seriously impede the development of aqueous zinc batteries. Herein, a new gel electrolyte with multiple molecular anchors is designed by employing natural biomaterials from chitosan and chlorophyll derivative. The gel electrolyte firmly anchors water molecules by ternary hydrogen bonding to reduce the activity of water molecules and inhibit hydrogen evolution reaction. Meanwhile, the multipolar charged functional groups realize the gradient induction and redistribution of Zn2+ , which drives oriented Zn (002) plane deposition of Zn2+ and then achieves uniform Zn deposition and dendrite-free anode. As a result, it endows the Zn||Zn cell with over 1700 h stripping/plating processes and a high efficiency of 99.4% for the Zn||Cu cell. In addition, the Zn||V2 O5 full cells also exhibit capacity retention of 81.7% after 600 cycles at 0.5 A g-1 and excellent long-term stability over 1600 cycles at 2 A g-1 , and the flexible pouch cells can provide stable power for light-emitting diodes even after repeated bending. The gel electrolyte strategy provides a reference for reversible zinc anode and flexible wearable devices.

Electrolyte Additives for Stable Zn Anodes

Zn-ion batteries are regarded as the most promising batteries for next-generation, large-scale energy storage because of their low cost, high safety, and eco-friendly nature. The use of aqueous electrolytes results in poor reversibility and leads to many challenges related to the Zn anode. Electrolyte additives can effectively address many such challenges, including dendrite growth and corrosion. This review provides a comprehensive introduction to the major challenges in and current strategies used for Zn anode protection. In particular, an in-depth and fundamental understanding is provided of the various functions of electrolyte additives, including electrostatic shielding, adsorption, in situ solid electrolyte interphase formation, enhancing water stability, and surface texture regulation. Potential future research directions for electrolyte additives used in aqueous Zn-ion batteries are also discussed.

Understanding the Electrical Mechanisms in Aqueous Zinc Metal Batteries: From Electrostatic Interactions to Electric Field Regulation

Aqueous Zn metal batteries are considered as competitive candidates for next-generation energy storage systems due to their excellent safety, low cost, and environmental friendliness. However, the inevitable dendrite growth, severe hydrogen evolution, surface passivation, and sluggish reaction kinetics of Zn metal anodes hinder the practical application of Zn metal batteries. Detailed summaries and prospects have been reported focusing on the research progress and challenges of Zn metal anodes, including electrolyte engineering, electrode structure design, and surface modification. However, the essential electrical mechanisms that significantly influence Zn2+ ions migration and deposition behaviors have not been reviewed yet. Herein, in this review, the regulation mechanisms of electrical-related electrostatic repulsive/attractive interactions on Zn2+ ions migration, desolvation, and deposition behaviors are systematically discussed. Meanwhile, electric field regulation strategies to promote the Zn2+ ions diffusion and uniform Zn deposition are comprehensively reviewed, including enhancing and homogenizing electric field intensity inside the batteries and adding external magnetic/pressure/thermal field to couple with the electric field. Finally, future perspectives on the research directions of the electrical-related strategies for building better Zn metal batteries in practical applications are offered.

Synergistic Ion Sieve and Solvation Regulation by Recyclable Clay-Based Electrolyte Membrane for Stable Zn-Iodine Battery

The high dissolution of polyiodides and unstable interface at the anode/electrolyte severely restrict the practical applications of rechargeable aqueous Zn-iodine batteries. Herein, we develop a zinc ion-based montmorillonite (ZMT) electrolyte membrane for synergizing ion sieve and solvation regulation to achieve highly stable Zn-iodine batteries. The rich M-O band and special cation-selective transport channel in ZMT locally tailor the solvation sheath around Zn2+ and therefore achieve high transference number (t+ = 0.72), benefiting for uniform and reversible deposition/stripping of Zn. Meanwhile, the mechanisms for three-step polyiodide generation and shuttle-induced Zn corrosion are highlighted by in situ characterization techniques. It is confirmed that the strong chemical adsorption between O atoms in ZMT and polyiodides species is the key to effectively inhibit the shuffle effect and side reactions. Consequently, the ZMT-based Zn-iodine battery delivers a high capacity of 0.45 mAh cm-2 at 1 mA cm-2 with a much improved Coulombic efficiency of 99.5% and outstanding capacity retention of 95% after 13 500 cycles at 10 mA cm-2. Moreover, owing to its high durability and chemical inertness and structural stability, ZMT-based electrolyte membranes can be recycled and applied in double-sided pouch cells, delivering a high areal capacity of 2.4 mAh cm-2 at 1 mA cm-2.

Transforming Dye Molecules into Electrochemical Allies: Direct Red 80 as a Dual-Functional Electrolyte Additive for Dendrite-Free Aqueous Zinc-Ion Batteries

Despite the numerous advantages of abundant zinc resources, low redox potential, and affordability, aqueous zinc-ion batteries (AZIBs) currently face limitations due to dendritic growth and side reactions. This study explores the use of low-cost and efficient anionic dyes, specifically Direct Red 80 (DR80) as dual-functional electrolyte additives to enhance the electrochemical performance of AZIBs and facilitate the reuse of dye wastewater. Experimental and theory calculation results all demonstrate that the DR80 molecules readily adsorb onto the surface of the zinc anode, creating a stable and robust solid electrolyte interphase layer. This layer acts as a protective barrier, effectively mitigating H+ attacks and reducing both hydrogen evolution and corrosion reactions. Additionally, it covers any initial protrusions on the zinc anode, preventing the occurrence of the "tip-effect" phenomenon and limiting access of water to the zinc anode, thereby minimizing water decomposition. Moreover, the sulfonic acid groups of DR80 molecules displace some water molecules in [Zn(H2O)6]2+, disrupting the original solvent sheath and reducing water decomposition. Especially, using the DR80 additive, the Zn/Zn cell reaches an impressive cycle life of 1500 h at 2 mA cm-2@1 mAh cm-2. Given the low cost and widespread availability, this additive shows great potential in the future practical implementation of AZIBs.

An Electrochemical Perspective of Aqueous Zinc Metal Anode

Based on the attributes of nonflammability, environmental benignity, and cost-effectiveness of aqueous electrolytes, as well as the favorable compatibility of zinc metal with them, aqueous zinc ions batteries (AZIBs) become the leading energy storage candidate to meet the requirements of safety and low cost. Yet, aqueous electrolytes, acting as a double-edged sword, also play a negative role by directly or indirectly causing various parasitic reactions at the zinc anode side. These reactions include hydrogen evolution reaction, passivation, and dendrites, resulting in poor Coulombic efficiency and short lifespan of AZIBs. A comprehensive review of aqueous electrolytes chemistry, zinc chemistry, mechanism and chemistry of parasitic reactions, and their relationship is lacking. Moreover, the understanding of strategies for suppressing parasitic reactions from an electrochemical perspective is not profound enough. In this review, firstly, the chemistry of electrolytes, zinc anodes, and parasitic reactions and their relationship in AZIBs are deeply disclosed. Subsequently, the strategies for suppressing parasitic reactions from the perspective of enhancing the inherent thermodynamic stability of electrolytes and anodes, and lowering the dynamics of parasitic reactions at Zn/electrolyte interfaces are reviewed. Lastly, the perspectives on the future development direction of aqueous electrolytes, zinc anodes, and Zn/electrolyte interfaces are presented.

Manipulating hydrogen and coordination bond chemistry for reversible zinc metal anodes

Aqueous zinc ion hybrid capacitors (ZHCs) are promising as electrochemical energy storage devices due to their safety and cost-effectiveness. However, the practical application of aqueous ZHCs is impeded by zinc dendrite growth and side reactions induced by H2O during long-term cycling. Herein, an organic small molecule, dimethyl sulfoxide (DMSO), is elaborately introduced into 2 M ZnSO4 electrolyte to simultaneously overcome these challenges. As convincingly evidenced by experimental and theoretical results, the DMSO reconstructs the Zn[(H2O)6]2+ structure and original hydrogen bond networks at the molecular level. By forming coordination bonds with Zn2+ and hydrogen bonds with H2O due to the stronger electron donating ability of oxygen in molecule, DMSO establishes a Zn2+ solvation shell structure that inhibits H2O decomposition and dendrite growth. As a proof of concept, the implementation of this hybrid electrolyte in a Zn||Cu asymmetrical cell results in a high Coulombic efficiency (CE) of over 99.8% for 568 cycles at a current density of 2 mA cm-2. Furthermore, the full cells using this hybrid electrolyte coupled with activated carbon (AC) cathode can operate for over 30,000 cycles. These results suggest that reconstructing the solvation structure and hydrogen bond networks guide the design of electrolytes for the development of high-performance aqueous ZHCs.

Trace Sc3+-electrolyte additive enabling stable Zn metal anodes for aqueous zinc-ion batteries

Trace Sc3+ additive (1.0 mol%) is shown to greatly improve the Coulombic efficiency and cycling stability of Zn metal anodes in aqueous ZnSO4 electrolyte due to the decreased nucleation overpotential and increased kinetics for Zn plating/stripping. Both Zn‖Zn and Zn‖V2O5 cells show enhanced cycling stability and rate capability in the Sc3+-modified electrolyte.

Trend of Developing Aqueous Liquid and Gel Electrolytes for Sustainable, Safe, and High-Performance Li-Ion Batteries

Current lithium-ion batteries (LIBs) rely on organic liquid electrolytes that pose significant risks due to their flammability and toxicity. The potential for environmental pollution and explosions resulting from battery damage or fracture is a critical concern. Water-based (aqueous) electrolytes have been receiving attention as an alternative to organic electrolytes. However, a narrow electrochemical-stability window, water decomposition, and the consequent low battery operating voltage and energy density hinder the practical use of aqueous electrolytes. Therefore, developing novel aqueous electrolytes for sustainable, safe, high-performance LIBs remains challenging. This Review first commences by summarizing the roles and requirements of electrolytes-separators and then delineates the progression of aqueous electrolytes for LIBs, encompassing aqueous liquid and gel electrolyte development trends along with detailed principles of the electrolytes. These aqueous electrolytes are progressed based on strategies using superconcentrated salts, concentrated diluents, polymer additives, polymer networks, and artificial passivation layers, which are used for suppressing water decomposition and widening the electrochemical stability window of water of the electrolytes. In addition, this Review discusses potential strategies for the implementation of aqueous Li-metal batteries with improved electrolyte-electrode interfaces. A comprehensive understanding of each strategy in the aqueous system will assist in the design of an aqueous electrolyte and the development of sustainable and safe high-performance batteries.

Hydrogel Electrolyte Enabled High-Performance Flexible Aqueous Zinc Ion Energy Storage Systems toward Wearable Electronics

To cater to the swift advance of flexible wearable electronics, there is growing demand for flexible energy storage system (ESS). Aqueous zinc ion energy storage systems (AZIESSs), characterizing safety and low cost, are competitive candidates for flexible energy storage. Hydrogels, as quasi-solid substances, are the appropriate and burgeoning electrolytes that enable high-performance flexible AZIESSs. However, challenges still remain in designing suitable and comprehensive hydrogel electrolyte, which provides flexible AZIESSs with high reversibility and versatility. Hence, the application of hydrogel electrolyte-based AZIESSs in wearable electronics is restricted. A thorough review is required for hydrogel electrolyte design to pave the way for high-performance flexible AZIESSs. This review delves into the engineering of desirable hydrogel electrolytes for flexible AZIESSs from the perspective of electrolyte designers. Detailed descriptions of hydrogel electrolytes in basic characteristics, Zn anode, and cathode stabilization effects as well as their functional properties are provided. Moreover, the application of hydrogel electrolyte-based flexible AZIESSs in wearable electronics is discussed, expecting to accelerate their strides toward lives. Finally, the corresponding challenges and future development trends are also presented, with the hope of inspiring readers.

Macromolecules Promoting Robust Zinc Anode by Synergistic Coordination Effect and Charge Redistribution

Zn dendrite formation is the main obstacle to commercializing aqueous zinc-ion batteries (ZIBs). α-cyclodextrin (α-CD) is proposed as an environmentally friendly macromolecule additive in the ZnSO4 -based electrolyte to obtain stable and reversible Zn anodes. The results show that α-CD molecules' unique 3D structure can effectively regulate the mass transfer of the electrolyte components and isolate the Zn anode from H2 O molecules. The α-CD provides abundant electrons to the Zn (002) crystallographic plane, which induces charge density redistribution. Such an effect relieves the reduction and aggregation of Zn2+ cations while protecting the Zn metal anode from water molecules. Finally, a small amount of α-CD additive (0.01 M) can enhance the performance of Zn significantly in Zn||Cu cells (1980 cycles with 99.45% average CE) and Zn||Zn cells (8000 h ultra-long cycle life). The excellent practical applicability was further verified in Zn||MnO2 cells.

Strategies for Optimizing the Zn Anode/Electrolyte Interfaces Toward Stable Zn-Based Batteries

Aqueous rechargeable Zn-ion batteries (ARZIBs) have attracted extensive attention because of the advantages of high energy density, high safety, and low cost. However, the commercialization of ARZIBs is still challenging, mainly because of the low efficiency of Zn anodes. Several undesirable reactions (e.g., Zn dendrite and byproduct formation) always occur at the Zn anode/electrolyte interfaces, resulting in low Coulombic efficiency and rapid decay of ARZIBs. Motivated by the great interest in addressing these issues, various optimization strategies and related mechanisms have been proposed to stabilize the Zn anode-electrolyte interfaces and enlengthen the cycling lifespan of ARZIBs. Therefore, considering the rapid development of this field, updating the optimization strategies in a timely manner and understanding their protection mechanisms are highly necessary. This review provides a brief overview of the Zn anode/electrolyte interfaces from the fundamentals and challenges of Zn anode chemistry to related optimization strategies and perspectives. Specifically, these strategies are systematically summarized and classified, while several representative works are presented to illustrate the effect and corresponding mechanism in detail. Finally, future challenges and research directions for the Zn anode/electrolyte interfaces are comprehensively clarified, providing guidelines for accurate evaluation of the interfaces and further fostering the development of ARZIBs.