Elastic Buffering Layer on CuS Enabling High-Rate and Long-Life Sodium-Ion Storage

Revealing Na+-coordination induced Failure Mechanism of Metal Sulfide Anode for Sodium Ion Batteries

Metal sulfide (MS) is regarded as a promising candidate of the anode materials for sodium-ion battery (SIB) with ideal capacity and low cost, yet still suffers from the inferior cycling stability and voltage degradation. Herein, the coordination relationship between the discharge product Na2S with the Na+ (NaPF6) in the electrolyte, is revealed as the root cause for the cycling failure of MS. Na+-coordination effect assistants the dissolution of Na2S, further delocalizing Na2S from the reaction interface under the function of electric field, which leads to the solo oxidation of the discharge product element metal without the participation of Na2S. Besides, the higher highest occupied molecular orbital of Na2S suggest the facilitated Na2S solo oxidation to produce sodium polysulfides (NaPSs). Based on these, lowering the Na+ concentration of the electrolyte is proposed as a potential improvement strategy to change the coordination environment of Na2S, suppressing the side reactions of the solo-oxidation of element metal and Na2S. Consequently, the enhanced conversion reaction reversibility and prolonged cycle life are achieved. This work renders in-depth perception of failure mechanism and inspiration for realizing advanced conversion-type anode.

Boosting sodium-ion battery performance with binary metal-doped Na3V2(PO4)2F3 cathodes

Na3V2(PO4)2F3 (NVPF), recognized for its Na superionic conductor architecture, emerges as a promising candidate among polyanion-type cathodes for sodium ion batteries (SIBs). However, its adoption in practical applications faces obstacles due to its inherently low electronic conductivity. To address this challenge, we employ a binary co-doped strategy to design Na3.3K0.2V1.5Mg0.5(PO4)2F3 cathode with nitrogen-doped carbon (NC) coating layer. This configuration enhances electronic conductivity and reduces diffusion barriers for sodium ion (Na+). The strategy of incorporating nitrogen-doped carbon coating not only facilitates the formation of a porous structure but also introduces additional defects and active sites. Such modifications accelerate the reaction kinetics and augment electrolyte interaction through an expanded specific surface area, thus streamlining the electrochemical process. Concurrently, strategic heteroatom substitution leads to a more efficient engagement of Na+ in the electrochemical activities, thereby bolstering the cathode's structural integrity. The vanadium fluorophosphate Na3.3K0.2V1.5Mg0.5(PO4)2F3@NC exhibits an electrochemical performance, including a high discharge specific capacity of 124.3 mA h g-1 at 0.1C, a long lifespan of 1000 cycles with a capacity retention of 93.1 % at 10C, and a rate property of 73.2 mA h g-1 at 20C. This research provides a method for preparing binary doped NVPF for energy storage electrochemistry.

High-performance VO2/CNT@PANI with core-shell construction enable printable in-planar symmetric supercapacitors

As a progressive electronic energy storage device, the flexible supercapacitor holds tremendous promise for powering wearable/portable electronic products. Of various pseudocapacitor materials, vanadium dioxide (VO2) has garnered extensive attention due to its impressive theoretical capacitance. However, the challenges of inferior cycling life and lower energy density to be addressed. Herein, we prepare VO2 nanorods with winding carbon nanotubes (CNT) via a facile solvothermal route, followed by in situ polymerization of polyaniline (PANI) shell. Taking full advantage of the synergistic effect, the VO2/CNT@PANI composite delivers a high specific capacitance of 354.2F/g at 0.5 A/g and a long cycling life of ∼ 88.2 % over 5000 cycles resulting from the enhanced conductivity of CNT and stabilization of PANI shell. By screen printing the formulated inks with outstanding rheological behaviours, we manufacture an in-planar VO2/CNT@PANI symmetric supercapacitor (VO2/CNT@PANI SSC) device featuring an orderly arrangement structure. This device yields a remarkable areal energy density of 99.57 μWh/cm2 at a power density of 387.5 μW/cm2 while retaining approximately ∼ 87.6 % of its initial capacitance after prolonged use. Furthermore, we successfully powered a portable game machine for more than 2 min using two SSCs connected in series with ease. Therefore, this work presents a universal strategy that utilises combination and coating to boost electrochemical performance for flexible high-performance supercapacitors.

A cobalt-doped hollow ZnS polyhedra@porous carbon shell composite anode for high-rate sodium-ion batteries

Transition metal sulfides (TMSs) have drawn promising attention due to their low cost and high theoretical capacity for sodium storage. However, the critical issues of TMSs with huge volume changes and lower ionic/electronic conductivity are the major challenges for their practical application in sodium-ion batteries. Herein, we constructed cobalt-doped ZnS encapsulated in an N-doped carbon shell (denoted as Co-ZnS@NC), which effectively alleviates the volume expansion and improves sodium storage performance. The mechanism analysis and ion diffusion kinetics analysis (GITT, EIS, and CV) prove the acceleration of Na+ diffusion by the built-in electric field and buffer carbon layer in the Co-ZnS@NC, optimizing the cycle life and rate capability. The as-prepared Co-ZnS@NC has a high reversible capacity of 456.8 mA h g-1 after 1000 cycles at 1.0 A g-1 and superior rate capability (368.8 mA h g-1 at 20.0 A g-1), with Na metal as the counter electrode. Moreover, the assembled full cell shows a high energy density of 214.4 W h kg-1. This work provides insight on heteroatom doping for optimizing the rate capability of TMS anodes.

PANI-Coated VOx Nanobelts with Core-Shell Architecture for Flexible All-Solid-State Supercapacitor

As a typical pseudocapacitor material, VOx possesses mixed valence states, making it an ideal electrode material for symmetric screen-printed supercapacitors. However, its high internal resistance and low energy density are the main hurdles to its widespread application. In this study, a two-dimensional PANI@VOx nanobelt with a core-shell architecture was constructed via a two-step route. This strategy involves the preparation of VOx using a solvothermal method, and a subsequent in situ polymerization process of the PANI. By virtue of the synergistic effect between the VOx core and the PANI shell, the optimal VOx@PANI has an enhanced conductivity of 0.7 ± 0.04 S/Ω, which can deliver a high specific capacitance of 347.5 F/g at 0.5 A/g, a decent cycling life of ~72.0%, and an outstanding Coulomb efficiency of ~100% after 5000 cycles at 5 A/g. Moreover, a flexible all-solid-state symmetric supercapacitor (VOx@PANI SSC) with an in-planar interdigitated structure was screen-printed and assembled on a nickel current collector; it yielded a remarkable areal energy density of 115.17 μWh/cm2 at an areal power density of 0.39 mW/cm2, and possessed outstanding flexibility and mechanical performance. Notably, a "Xiaomi" hygrothermograph (3.0 V) was powered easily by tandem SSCs with an operating voltage of 3.1 V. Therefore, this advanced pseudocapacitor material with core-shell architecture opens novel ideas for flexible symmetric supercapacitors in powering portable/wearable products.

In Situ Atomic-Scale Deciphering of Multiple Dynamic Phase Transformations and Reversible Sodium Storage in Ternary Metal Sulfide Anode

Ternary metal sulfides (TMSs), endowed with the synergistic effect of their respective binary counterparts, hold great promise as anode candidates for boosting sodium storage performance. Their fundamental sodium storage mechanisms associated with dynamic structural evolution and reaction kinetics, however, have not been fully comprehended. To enhance the electrochemical performance of TMS anodes in sodium-ion batteries (SIBs), it is of critical importance to gain a better mechanistic understanding of their dynamic electrochemical processes during live (de)sodiation cycling. Herein, taking BiSbS₃ anode as a representative paradigm, its real-time sodium storage mechanisms down to the atomic scale during the (de)sodiation cycling are systematically elucidated through in situ transmission electron microscopy. Previously unexplored multiple phase transformations involving intercalation, two-step conversion, and two-step alloying reactions are explicitly revealed during sodiation, in which newly formed Na₂BiSbS₄ and Na₂BiSb are respectively identified as intermediate phases of the conversion and alloying reactions. Impressively, the final sodiation products of Na₆BiSb and Na₂S can recover to the original BiSbS₃ phase upon desodiation, and afterward, a reversible phase transformation can be established between BiSbS₃ and Na₆BiSb, where the BiSb as an individual phase (rather than respective Bi and Sb phases) participates in reactions. These findings are further verified by operando X-ray diffraction, density functional theory calculations, and electrochemical tests. Our work provides valuable insights into the mechanistic understanding of sodium storage mechanisms in TMS anodes and important implications for their performance optimization toward high-performance SIBs.

Preparation of Cu7.2S4@N, S co-doped carbon honeycomb-like composite structure for high-rate and high-stability sodium-ion storage

Sodium ion batteries (SIBs) attract most of the attention as alterative secondary battery systems for future large-scale energy storage and power batteries due to abundance resource and low cost. However, the lack of anode materials with high-rate performance and high cycling-stability has limited the commercial application of SIBs. In this paper, Cu_7.2S₄@N, S co-doped carbon (Cu_7.2S₄@NSC) honeycomb-like composite structure was designed and prepared by a one-step high-temperature chemical blowing process. As an anode material for SIBs, Cu_7.2S₄@NSC electrode exhibited an ultra-high initial Coulomb efficiency (94.9%) and an excellent electrochemical property including a high reversible capacity of 441.3 mAh g^-1 after 100 cycles at 0.2 A g^-1, an excellent rate performance of 380.4 mAh g^-1 even at 5 A g^-1, and a superior long-cycle stability with a capacity retention rate of approximately 100% after 700 cycles at 1A g^-1.

Recent Advances and Perspectives of Lewis Acidic Etching Route: An Emerging Preparation Strategy for MXenes

Since the discovery in 2011, MXenes have become the rising star in the field of two-dimensional materials. Benefiting from the metallic-level conductivity, large and adjustable gallery spacing, low ion diffusion barrier, rich surface chemistry, superior mechanical strength, MXenes exhibit great application prospects in energy storage and conversion, sensors, optoelectronics, electromagnetic interference shielding and biomedicine. Nevertheless, two issues seriously deteriorate the further development of MXenes. One is the high experimental risk of common preparation methods such as HF etching, and the other is the difficulty in obtaining MXenes with controllable surface groups. Recently, Lewis acidic etching, as a brand-new preparation strategy for MXenes, has attracted intensive attention due to its high safety and the ability to endow MXenes with uniform terminations. However, a comprehensive review of Lewis acidic etching method has not been reported yet. Herein, we first introduce the Lewis acidic etching from the following four aspects: etching mechanism, terminations regulation, in-situ formed metals and delamination of multi-layered MXenes. Further, the applications of MXenes and MXene-based hybrids obtained by Lewis acidic etching route in energy storage and conversion, sensors and microwave absorption are carefully summarized. Finally, some challenges and opportunities of Lewis acidic etching strategy are also presented.

In-situ synthesis of FeS/N, S co-doped carbon composite with electrolyte-electrode synergy for rapid sodium storage

Pyrrhotite (FeS) is extensively investigated as the anode for low-cost sodium-ion batteries (SIBs) due to their natural abundance and high theoretical capacity. However, it suffers from significant volume expansion and poor conductivity. These problems can be alleviated by promoting sodium-ion transport and introducing carbonaceous materials. Here, FeS decorated on N, S co-doped carbon (FeS/NC) is constructed through a facile and scalable strategy, which is the best of both worlds. Moreover, to give full play to the role of the optimized electrode, ether-based and ester-based electrolytes are used for matching. Reassuringly, the FeS/NC composite displays a reversible specific capacity of 387 mAh g^-1 after 1000 cycles at 5A g^-1 in dimethyl ether electrolyte. The even distribution of FeS nanoparticles on the ordered framework of carbon guarantees a fast electron/Na-ion transport channel, and the reaction kinetics can be further accelerated in the dimethyl ether (DME) electrolyte, ensuring the excellent rate capability and cycling performance of FeS/NC electrodes for sodium-ion storage. This finding not only provides a reference for the introduction of carbon via in-situ growth protocol, but also demonstrates the necessity for electrolyte-electrode synergy in realizing efficient sodium-ion storage.

Defective Bi2S3 Anchored on CuS/C as an Ultrafast and Long-Life Anode for Sodium-Ion Storage

Due to the high electrical conductivity and abundant redox active sites, bimetal sulfides are highly competitive anode materials for sodium storage with long-life and high-rate. Herein, a heterostructured metal sulfide (Bi₂S₃-CuS) with a carbon-based support is prepared by calcination and ion exchange methods. The synergistic effects of the heterostructure and defective structure provide facile diffusion channels, fast Na⁺ migration, and plentiful active sites for Na⁺, which reflect in the impressive electrochemical performance with a high reversible capacity of 592.2 mA h g^-1 after 1000 cycles at 8 A g^-1. Furthermore, the Na-ion full batteries exhibit an ultra-long cycling performance with a value of 216 mA h g^-1 after 4000 cycles at 10 A g^-1. Interestingly, the defective structure of Bi₂S₃ remains after cycling. Kinetic analyses and density functional theoretical calculations clarified that the heterointerfacial structure, especially on the interface containing sulfur defects in Bi₂S₃ of Bi₂S₃-CuS, could induce feasible ion adsorption and promote ion transfer, which lays the foundation for achieving ultrafast sodiation kinetics.