Optimization Conditions for Maximum Oil Bioremediation and Biopolymer Production by Pseudomonads

Enhanced bioremediation of oil-contaminated soil in a slurry bioreactor by H2O2-stimulation of oil-degrading/biosurfactant-generating bacteria: performance optimization and bacterial metagenomics

Oil-contaminated soil is the main challenge for oil-rich countries, and this study aimed to investigate the performance of the H₂O₂-stimulated slurry bioreactor for the bioremediation of real oil-contaminated soil. The effect of biomass concentration, soil to water (S/W) ratio, slurry temperature, pH, and H₂O₂ concentration were optimized for the removal of total petroleum hydrocarbons (TPH) from oil-contaminated soil. TPH removal efficiency, biosurfactants production, and peroxidase and dehydrogenase activities were measured. The optimum conditions for the complete biodegradation of 32 [Formula: see text] in the slurry bioreactor during 6 days were biomass of 2250 mg/L, S/W ratio of 20%, the temperature of 30 °C, pH of 7, and an H₂O₂ concentration of 120 mg/L. The highest peroxidase, dehydrogenase, surfactin, and rhamnolipid formation were also obtained under optimum conditions. The results pointed out that complete biodegradation of 32 g/kg of TPH in oil-contaminated soil at a short reaction time of 6 days is achievable in the developed process operated under optimum conditions. The GC/FID analysis of solid and liquid phases showed that the bioprocess completely biodegraded the different TPH fractions. H₂O₂ efficiently stimulated the biosurfactant-generating bacteria to produce peroxidase and thereby accelerating the bioremediation rate. Accordingly, an H₂O₂-mediated slurry bioreactor inoculated with biosurfactant/peroxidase-generating bacteria is a promising technique for cleaning up oil-contaminated soils.

Enhancing the degradation of mixed polycyclic aromatic hydrocarbon and medium-chain-length polyhydroxyalkanoate production by mixed bacterial cultures using modified repeated batch fermentation

AIMS

To increase the biodegradation of phenanthrene (PHE), pyrene (PYR) and fluoranthene (FLU) through mixed cultures of polycyclic aromatic hydrocarbon (PAH)-degrading bacteria, using modified repeated batch fermentation.

METHODS AND RESULTS

Novel bacterial strains of Pseudomonas putida, Pseudomonas sp. and Ralstonia eutropha were cultivated and the biodegradation and conversion of mixed PAH to medium-chain-length polyhydroxyalkanoates (MCL-PHA) was determined. The highest degradation of PAH (100%) and PHA production (50·0%) was obtained in medium containing 30 mmol l^-1 of mixed PAH after three cycles of repeated batch fermentation. The concentration of PAH in the reactor was increased from 30 to 90 mmol l^-1 with repeated additions of PAH, and bacteria were able to produce PHA at 40% of cell dry mass. The MCL-PHA were identified by gas chromatography/mass spectroscopy, with the 3-hydroxydecanoate (3-HD) monomer higher than 75 mol.%.

CONCLUSIONS

This study demonstrated that the biodegradation of PHE, PYR and FLU was enhanced by modified repeated batch fermentation using a mixed culture of bacteria. In addition, this fermentation strategy also increased the production of PHA, with an increase in monomer composition.

SIGNIFICANCE AND IMPACT OF THE STUDY

This was the first study to describe the enhancement of the degradation of mixed solutions of PHE, PYR and FLU, and PHA production, using novel mixed bacterial cultures and modified repeated batch fermentation. The MCL-PHA formed had uniquely high 3-HD content.