Recent Progresses in Electrocatalysts for Water Electrolysis

Electron regulation of CeO2 on CoP multi-shell hetero-junction micro-sphere towards highly efficient water oxidation

CeO2 has been identified as a significant cocatalyst to enhance the electrocatalytic activity of transition metal phosphides (TMPs). However, the electrocatalytic mechanism by which CeO2 enhances the catalytic activity of TMP remains unclear. In this study, we have successfully developed a unique CeO2-CoP-1-4 multishell microsphere heterostructure catalyst through a simple hydrothermal and calcination process. CeO2-CoP-1-4 exhibits great potential for electrocatalytic oxygen evolution reaction (OER), requiring only an overpotential of 254 mV to achieve a current density of 10 mA cm-2. Moreover, CeO2-CoP-1-4 demonstrates excellent operating durability lasting for 55 h. The presence of CeO2 as a cocatalyst can regulate the microsphere structure of CoP, the resulting multishell microsphere structure can shorten the mass transfer distance, and improve the utilization rate of the active site. Furthermore, in situ Raman and ex situ characterizations, and DFT theoretical calculation results reveal that CeO2 can effectively regulates the electronic structure of Co species, reduces the reaction free energy of rate-limiting step, thus increase the reaction kinetic. Overall, this study provides experimental and theoretical evidence to better comprehend the mechanism and structure evolution of CeO2 in enhancing the OER performance of CoP, offering a unique design inspiration for the development of efficient hollow heterojunction electrocatalysts.

A Mild Method for the Activation of Cation Exchange Membranes Used in Tubular PEM Electrolyzers

Co-extrusion of both half-cells in tubular PEM water electrolyzers can lower the costs for hydrogen production, since the number of components is reduced and the production process is simplified. However, after co-extrusion of the inner half-cell and the ion exchange membrane, the membrane is in its fluoride sulfonyl form and must be hydrolyzed to achieve the proton conductive sulfonic acid to be ready for use. Common practice is the hydrolysis using concentrated alkaline solutions, which causes a corrosion of the laminated anode electrode. We developed a less corrosive method using triethylsilanol as reactant. Tubular membranes hydrolyzed with this new procedure were characterized and tested in an electrolyzer laboratory test setup.

2D Ni2P/N-doped graphene heterostructure as a Novel electrocatalyst for hydrogen evolution reaction: A computational study

The main prerequisite for designing electrocatalysts with favorable performance is to examine the links between electronic structural features and catalytic activity. In this work, Ni2P as a model electrocatalyst and one of the most potent catalysts for hydrogen evolution reaction (HER) was utilized to develop various Ni2P and carbon-based (graphene and N-doped graphene) heterostructures. The characteristics of such structures (Ni2P, graphene, N-doped graphene, Ni2P/graphene, and Ni2P/N-doped graphene), including binding energies, the projected density of states (PDOS), band structure, charge density difference, charge transfer, Hirshfeld charge analysis, and minimum-energy path (MEP) towards HER were calculated and analyzed by density functional theory (DFT) approach. The coupling energy values of hybrid systems were correlated with the magnitude of charge transfer. The main factors driving a promising water-splitting reaction were explained by the data of PDOS, band structures, and charge analysis, including the inherent electronegativity of the N species alongside shifting the Fermi level toward the conductive band. It was also shown that a significant drop occurs in the HER energy barrier on Ni2P/graphene compared to the pristine Ni2P due to N doping on the graphene layer in the Ni2P/N-doped graphene heterostructure.

Electron Spin Selective Iridium Electrocatalysts for the Oxygen Evolution Reaction

Highly efficient electrocatalysts for water electrolysis are crucial to the widespread commercialization of the technology and an important step forward toward a sustainable energy future. In this study, an alternative method for boosting the electrocatalytic activity toward the oxygen evolution reaction (OER) of a well-known electrocatalyst (iridium) is presented. Iridium nanoparticles (2.1 ± 0.2 nm in diameter) functionalized with chiral molecules were found to markedly enhance the activity of the OER when compared to unfunctionalized and achiral functionalized iridium nanoparticles. At a potential of 1.55 V vs Reference Hydrogen Electrode (RHE), chiral functionalized iridium nanoparticles exhibited an average 85% enhancement in activity with respect to unfunctionalized iridium nanoparticles compared to an average 13% enhancement for the achiral functionalized iridium nanoparticle. This activity enhancement is attributed to a spin-selective electron transfer mechanism taking place on the chiral functionalized catalysts, a characteristic induced by the chirality of the ligand. This alternative path for the OER drastically reduces the production of hydrogen peroxide, which was confirmed via a colorimetric method.

FeNi2 S4 -A Potent Bifunctional Efficient Electrocatalyst for the Overall Electrochemical Water Splitting in Alkaline Electrolyte

For a carbon-neutral society, the production of hydrogen as a clean fuel through water electrolysis is currently of great interest. Since water electrolysis is a laborious energetic reaction, it requires high energy to maintain efficient and sustainable production of hydrogen. Catalytic electrodes can reduce the required energy and minimize production costs. In this context, herein, a bifunctional electrocatalyst made from iron nickel sulfide (FeNi2 S4 [FNS]) for the overall electrochemical water splitting is introduced. Compared to Fe2 NiO4 (FNO), FNS shows a significantly improved performance toward both OER and HER in alkaline electrolytes. At the same time, the FNS electrode exhibits high activity toward the overall electrochemical water splitting, achieving a current density of 10 mA cm-2 at 1.63 V, which is favourable compared to previously published nonprecious electrocatalysts for overall water splitting. The long-term chronopotentiometry test reveals an activation followed by a subsequent stable overall cell potential at around 2.12 V for 20 h at 100 mA cm-2 .

Local reaction environment in electrocatalysis

Beyond conventional electrocatalyst engineering, recent studies have unveiled the effectiveness of manipulating the local reaction environment in enhancing the performance of electrocatalytic reactions. The general principles and strategies of local environmental engineering for different electrocatalytic processes have been extensively investigated. This review provides a critical appraisal of the recent advancements in local reaction environment engineering, aiming to comprehensively assess this emerging field. It presents the interactions among surface structure, ions distribution and local electric field in relation to the local reaction environment. Useful protocols such as the interfacial reactant concentration, mass transport rate, adsorption/desorption behaviors, and binding energy are in-depth discussed toward modifying the local reaction environment. Meanwhile, electrode physical structures and reaction cell configurations are viable optimization methods in engineering local reaction environments. In combination with operando investigation techniques, we conclude that rational modifications of the local reaction environment can significantly enhance various electrocatalytic processes by optimizing the thermodynamic and kinetic properties of the reaction interface. We also outline future research directions to attain a comprehensive understanding and effective modulation of the local reaction environment.

Nitrogen and Sulfur Co-Doped Carbon-Coated Ni3 S2 /MoO2 Nanowires as Bifunctional Catalysts for Alkaline Seawater Electrolysis

Bifunctional catalysts have inherent advantages in simplifying electrolysis devices and reducing electrolysis costs. Developing efficient and stable bifunctional catalysts is of great significance for industrial hydrogen production. Herein, a bifunctional catalyst, composed of nitrogen and sulfur co-doped carbon-coated trinickel disulfide (Ni3 S2 )/molybdenum dioxide (MoO2 ) nanowires (NiMoS@NSC NWs), is developed for seawater electrolysis. The designed NiMoS@NSC exhibited high activity in alkaline electrolyte with only 52 and 191 mV overpotential to attain 10 mA cm-2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Significantly, the electrolyzer (NiMoS@NSC||NiMoS@NSC) based on this bifunctional catalyst drove 100 mA cm-2 at only 1.71 V along with a robust stability over 100 h in alkaline seawater, which is superior to a platinum/nickel-iron layered double hydroxide couple (Pt||NiFe LDH). Theoretical calculations indicated that interfacial interactions between Ni3 S2 and MoO2 rearranged the charge at interfaces and endowed Mo sites at the interfaces with Pt-like HER activity, while Ni sites on Ni3 S2 surfaces at non-interfaces are the active centers for OER. Meanwhile, theoretical calculations and experimental results also demonstrated that interfacial interactions improved the electrical conductivity, boosting reaction kinetics for both HER and OER. This study presented a novel insight into the design of high-performance bifunctional electrocatalysts for seawater splitting.

Electrochemical Activation of Atomic-Layer-Deposited Nickel Oxide for Water Oxidation

NiO-based electrocatalysts, known for their high activity, stability, and low cost in alkaline media, are recognized as promising candidates for the oxygen evolution reaction (OER). In parallel, atomic layer deposition (ALD) is actively researched for its ability to provide precise control over the synthesis of ultrathin electrocatalytic films, including film thickness, conformality, and chemical composition. This study examines how NiO bulk and surface properties affect the electrocatalytic performance for the OER while focusing on the prolonged electrochemical activation process. Two ALD methods, namely, plasma-assisted and thermal ALD, are employed as tools to deposit NiO films. Cyclic voltammetry analysis of ∼10 nm films in 1.0 M KOH solution reveals a multistep electrochemical activation process accompanied by phase transformation and delamination of activated nanostructures. The plasma-assisted ALD NiO film exhibits three times higher current density at 1.8 V vs RHE than its thermal ALD counterpart due to enhanced β-NiOOH formation during activation, thereby improving the OER activity. Additionally, the rougher surface formed during activation enhanced the overall catalytic activity of the films. The goal is to unravel the relationship between material properties and the performance of the resulting OER, specifically focusing on how the design of the material by ALD can lead to the enhancement of its electrocatalytic performance.

Evaluating algorithms of decision tree, support vector machine and regression for anode side catalyst data in proton exchange membrane water electrolysis

Nowadays, due to the various type of problems stemmed from using chemical compounds and fossil fuels which have widely influence on whole environment including acid rain, polar ice melting and etc., number of researches have been leading on replacing the nonrenewable energy sources with renewable ones in order to produce clean fuels. Among these, hydrogen emerges as a quintessential clean fuel, garnering substantial attention for its potential to be synthesized from the electric power generated by renewable sources like nuclear and solar energies. This is achieved through the employment of a proton exchange membrane water electrolysis (PEMWE) system, widely recognized as one of the most proficient and economically viable technologies for effecting the separation of H2O into H+ and OH-. In this study, the important affecting parameters on the anode side of catalyst in PEMWE and analyzed them by machine-learning (ML) algorithms through developing a data science (DS) procedure were discussed. Various machine learning models were subjected to comparison, wherein the Decision Tree models, specifically those configured with maximum depths of 3 and 4, emerged as the optimal choices, attaining a perfect 100% accuracy across both Dataset 1 and Dataset 2. Moreover, notable enhancements in accuracy values were observed for the Support Vector Machine (SVM) model, registering increments from 0.79 to 0.82 for Dataset 1 and 2, respectively. In stark contrast, the remaining models experienced a decrement in their accuracy scores. This phenomenon underscores the pivotal role played by the data generation process in rendering the models more faithful to real-world scenarios.

Recent Progress of Transition Metal Compounds as Electrocatalysts for Electrocatalytic Water Splitting

Hydrogen has enormous commercial potential as a secondary energy source because of its high calorific value, clean combustion byproducts, and multiple production methods. Electrocatalytic water splitting is a viable alternative to the conventional methane steam reforming technique, as it operates under mild conditions, produces high-quality hydrogen, and has a sustainable production process that requires less energy. Electrocatalysts composed of precious metals like Pt, Au, Ru, and Ag are commonly used in the investigation of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Nevertheless, their limited availability and expensive cost restrict practical use. In contrast, electrocatalysts that do not contain precious metals are readily available, cost-effective, environmentally friendly, and possess electrocatalytic performance equal to that of noble metals. However, considerable research effort must be devoted to create cost-effective and high-performing catalysts. This article provides a comprehensive examination of the reaction mechanism involved in electrocatalytic water splitting in both acidic and basic environments. Additionally, recent breakthroughs in catalysts for both the hydrogen evolution and oxygen evolution reactions are also discussed. The structure-activity relationship of the catalyst was deep-going discussed, together with the prospects of current obstacles and potential for electrocatalytic water splitting, aiming at provide valuable perspectives for the advancement of economical and efficient electrocatalysts on an industrial scale.

Cobalt Ferrite Surface-Modified Carbon Nanotube Fibers as an Efficient and Flexible Electrode for Overall Electrochemical Water Splitting Reactions

One of the most practical and environmentally friendly ways to deal with the energy crises and global warming is to produce hydrogen as clean fuel by splitting water. The central obstacle for electrochemical water splitting is the use of expensive metal-based catalysts. For electrocatalytic hydrogen production, it is essential to fabricate an efficient catalyst for the counterpart oxygen evolution reaction (OER), which is a four-electron-transfer sluggish process. Here in this study, we have successfully fabricated cobalt-based ferrite nanoparticles over the surface of carbon nanotube fiber (CNTF) that was utilized as flexible anode materials for the OER and overall electrochemical water splitting reactions. Scanning electron microscopy images with elemental mapping showed the growth of nanoparticles over CNTF, while electrochemical characterization exhibited excellent electrocatalytic performance. Linear sweep voltammetry revealed the reduced overpotential value (260 mV@η10mAcm-2) with a small Tafel slope of 149 mV dec-1. Boosted electrochemical double layer capacitance (0.87 mF cm-2) for the modified electrode also reflects the higher surface area as compared to pristine CNTF (Cdl = 0.022 mF cm-2). Charge transfer resistance for the surface-modified CNTF showed the lower diameter in the Nyquist plot and was consequently associated with the better Faradaic process at the electrode/electrolyte interface. Overall, the as-fabricated electrode could be a promising alternative for the efficient electrochemical water splitting reaction as compared to expensive metal-based electrocatalysts.

Decorating Mg12O12 Nanocage with Late First-Row Transition Metals To Act as Single-Atom Catalysts for the Hydrogen Evolution Reaction

In the pursuit of sustainable clean energy sources, the hydrogen evolution reaction (HER) has attained significant interest from the scientific community. Single-atom catalysts (SACs) are among the most promising candidates for future electrocatalysis because they possess high thermal stability, effective electrical conductivity, and excellent percentage atom utilization. In the present study, the applicability of late first-row transition metals (Fe-Zn) decorated on the magnesium oxide nanocage (TM@Mg12O12) as SACs for the HER has been studied, via density functional theory. The late first-row transition metals have been chosen as they have high abundance and are relatively low-cost. Among the studied systems, results show that the Fe@Mg12O12 SAC is the best candidate for catalyzing the HER reaction as it exhibits the lowest activation barrier for HER. Moreover, Fe@Mg12O12 shows high stability (Eint = -1.64 eV), which is essential in designing SACs to prevent aggregation of the metal. Furthermore, the results of the electronic properties' analysis showed that the HOMO-LUMO gap of the nanocage is decreased significantly upon doping of Fe (from 4.81 to 2.28 eV), indicating an increase in the conductivity of the system. This study highlights the potential application of the TM@nanocage SAC systems as effective HER catalysts.

Predictive Modeling of Molecular Mechanisms in Hydrogen Production and Storage Materials

Hydrogen has been widely considered to hold promise for solving challenges associated with the increasing demand for green energy. While many chemical and biochemical processes produce molecular hydrogen as byproducts, electrochemical approaches using water electrolysis are considered to be a predominant method for clean and green hydrogen production. We discuss the current state-of-the-art in molecular hydrogen production and storage and, more significantly, the increasing role of computational modeling in predictively designing and deriving insights for enhancing hydrogen storage efficiency in current and future materials of interest. One of the key takeaways of this review lies in the continued development and implementation of large-scale atomistic simulations to enable the use of designer electrolyzer-electrocatalysts operating under targeted thermophysical conditions for increasing green hydrogen production and improving hydrogen storage in advanced materials, with limited tradeoffs for storage efficiency.

One-dimensional carbon based nanoreactor fabrication by electrospinning for sustainable catalysis

An efficient and economical electrocatalyst as kinetic support is key to electrochemical reactions. For this reason, chemists have been working to investigate the basic changing of chemical principles when the system is confined in limited space with nanometer-scale dimensions or sub-microliter volumes. Inspired by biological research, the design and construction of a closed reaction environment, namely the reactor, has attracted more and more interest in chemistry, biology, and materials science. In particular, nanoreactors became a high-profile rising star and different types of nanoreactors have been fabricated. Compared with the traditional particle nanoreactor, the one-dimensional (1D) carbon-based nanoreactor prepared by the electrospinning process has better electrolyte diffusion, charge transfer capabilities, and outstanding catalytic activity and selectivity than the traditional particle catalyst which has great application potential in various electrochemical catalytic reactions.

Tunable Method for the Preparation of Layered Double Hydroxide Nanoparticles and Mesoporous Mixed Metal Oxide Electrocatalysts for the Oxygen Evolution Reaction

Preparation of high-performance and durable electrocatalysts for anion exchange membrane water electrolysis is a crucial step toward the broad implementation of this technology. Here, we present an easily tunable, one-step hydrothermal method for the preparation of Ni-based (NiX, X = Co, Fe) layered double hydroxide nanoparticles (LDHNPs) for the oxygen evolution reaction (OER), using tris(hydroxymethyl)aminomethane (Tris-NH₂) for particle growth control. The LDHNPs are used as building blocks of mesoporous mixed metal oxides (MMOs) with a block copolymer template (Pluronic F127), followed by thermal treatment at 250 °C. NiX MMOs have a significantly larger surface area compared to the analogous LDHNPs. NiX LDHNPs and MMOs exhibit excellent performance and long-term cycling stability, making them promising OER catalysts. Moreover, this versatile method can be easily tailored and scaled up for the preparation of platinum group metal-free electrocatalysts for other reactions of interest, which highlights the relevance of this work to the field of electrocatalysis.

High-Entropy Perovskites for Energy Conversion and Storage: Design, Synthesis, and Potential Applications

Perovskites have shown tremendous promise as functional materials for several energy conversion and storage technologies, including rechargeable batteries, (electro)catalysts, fuel cells, and solar cells. Due to their excellent operational stability and performance, high-entropy perovskites (HEPs) have emerged as a new type of perovskite framework. Herein, this work reviews the recent progress in the development of HEPs, including synthesis methods and applications. Effective strategies for the design of HEPs through atomistic computations are also surveyed. Finally, an outlook of this field provides guidance for the development of new and improved HEPs.

Introducing High-Valence Iridium Single Atoms into Bimetal Phosphides toward High-Efficiency Oxygen Evolution and Overall Water Splitting

Single atoms are superior electrocatalysts having high atomic utilization and amazing activity for water oxidation and splitting. Herein, this work reports a thermal reduction method to introduce high-valence iridium (Ir) single atoms into bimetal phosphide (FeNiP) nanoparticles toward high-efficiency oxygen evolution reaction (OER) and overall water splitting. The presence of high-valence single Ir atoms (Ir⁴⁺ ) and their synergistic interaction with Ni³⁺ species as well as the disproportionation of Ni³⁺ assisted by Fe collectively contribute to the exceptional OER performance. In specific, at appropriate Ir/Ni and Fe/Ni ratios, the as-prepared Ir-doped FeNiP (Ir₂₅ -Fe₁₆ Ni₁₀₀ P₆₄ ) nanoparticles at a mass loading of only 35 µg cm^-2 show the overpotential as low as 232 mV at 10 mA cm^-2 and activity as high as 1.86 A mg^-1 at 1.5 V versus RHE for OER in 1.0 m KOH. Computational simulations confirm the vital role of high-valence Ir to weaken the adsorption of OER intermediates, favorable for accelerating OER kinetics. Impressively, a Pt/C||Ir₂₅ -Fe₁₆ Ni₁₀₀ P₆₄ two-electrode alkaline electrolyzer affords a current density of 10 mA cm^-2 at a low cell voltage of 1.42 V, along with satisfied stability. An AA battery with a nominal voltage of 1.5 V can drive overall water splitting with obvious bubbles released.

Development of High-Performance Polymer Electrolyte Membranes through the Application of Quantum Dot Coatings to Nafion Membranes

Proton exchange membrane water electrolysis (PEMWE) generates oxygen and hydrogen at the anode and cathode, respectively, by conducting protons generated at the anode to the cathode through a proton exchange membrane (PEM). The performance of PEMWE can be improved with faster catalytic reactions at each electrode; thus, the development of a PEM with excellent ionic conductivity and physicochemical stability is essential. Nafion, a type of perfluoro-sulfonic acid polymer, is the most widely used PEM material. However, despite its excellent conductivity and chemical stability, it exhibits high hydrogen permeability due to its structural characteristics. Quantum dots (QDs) have a hydrophilic functional group that can act as an ion conductor and are extremely compatible with the hydrophilic cluster of Nafion due to their characteristic nanosized structure. In this study, various compositions of N-doped carbon quantum dots (CQDs) containing hydrophilic functional groups were coated on a Nafion-212 membrane. The resulting series of CQD-coated Nafion membranes exhibited improvements in morphology and ionic conductivity as well as reductions in hydrogen permeability. In particular, the Nafion membrane coated with 0.75 wt % of N-doped CQD (CQD-cNafion-0.75) exhibited improved mechanical properties and higher oxidation stability compared to Nafion-212. It also displayed higher ionic conductivity of 240.3 mS cm^-1 at 80 °C and reduced hydrogen permeability (about 10% reduction) compared to Nafion-212. In addition, the performance of single-cell PEMWE using the CQD-cNafion-0.75 membrane was found to be approximately 1.2 times higher than Nafion-212.

Exploring the Parameters Controlling Product Selectivity in Electrochemical CO2 Reduction in Competition with Hydrogen Evolution Employing Manganese Bipyridine Complexes

Selective reduction of CO₂ is an efficient solution for producing nonfossil-based chemical feedstocks and simultaneously alleviating the increasing atmospheric concentration of this greenhouse gas. With this aim, molecular electrocatalysts are being extensively studied, although selectivity remains an issue. In this work, a combined experimental-computational study explores how the molecular structure of Mn-based complexes determines the dominant product in the reduction of CO₂ to HCOOH, CO, and H₂. In contrast to previous Mn(bpy-R)(CO)₃Br catalysts containing alkyl amines in the vicinity of the Br ligand, here, we report that bpy-based macrocycles locking these amines at the side opposite to the Br ligand change the product selectivity from HCOOH to H₂. Ab initio molecular dynamics simulations of the active species showed that free rotation of the Mn(CO)₃ moiety allows for the approach of the protonated amine to the reactive center yielding a Mn-hydride intermediate, which is the key in the formation of H₂ and HCOOH. Additional studies with DFT methods showed that the macrocyclic moiety hinders the insertion of CO₂ to the metal hydride favoring the formation of H₂ over HCOOH. Further, our results suggest that the minor CO product observed experimentally is formed when CO₂ adds to Mn on the side opposite to the amine ligand before protonation. These results show how product selectivity can be modulated by ligand design in Mn-based catalysts, providing atomistic details that can be leveraged in the development of a fully selective system.

Recent Advances in Transition Metal Tellurides (TMTs) and Phosphides (TMPs) for Hydrogen Evolution Electrocatalysis

The hydrogen evolution reaction (HER) is a developing and promising technology to deliver clean energy using renewable sources. Presently, electrocatalytic water (H₂O) splitting is one of the low-cost, affordable, and reliable industrial-scale effective hydrogen (H₂) production methods. Nevertheless, the most active platinum (Pt) metal-based catalysts for the HER are subject to high cost and substandard stability. Therefore, a highly efficient, low-cost, and stable HER electrocatalyst is urgently desired to substitute Pt-based catalysts. Due to their low cost, outstanding stability, low overpotential, strong electronic interactions, excellent conductivity, more active sites, and abundance, transition metal tellurides (TMTs) and transition metal phosphides (TMPs) have emerged as promising electrocatalysts. This brief review focuses on the progress made over the past decade in the use of TMTs and TMPs for efficient green hydrogen production. Combining experimental and theoretical results, a detailed summary of their development is described. This review article aspires to provide the state-of-the-art guidelines and strategies for the design and development of new highly performing electrocatalysts for the upcoming energy conversion and storage electrochemical technologies.

Utilizing the cross-linked effect and reconstruction strategy of phytic acid to build Fe-Co-Ni trimetallic amorphous carbon-matrix compounds as efficient oxygen evolution catalyst

Developing low-cost electrocatalysts with excellent activity is significant for accelerating the slow oxygen evolution reaction (OER). In this work, an effective electrocatalyst is prepared via the cross-linked effect and reconstruction strategy based on inexpensive transition metals (Fe, Co, and Ni) and phytic acid (PA). The feasibility of utilizing the cross-linked effect and reconstruction strategy is due to that PA molecules with strongly electronegative phosphoric acid groups possess a great deal of complexing sites, which can facilitate the formation of large cross-linked network by randomly complexing Fe, Co and Ni ions. And the carboatomic rings in PA molecules will reconstructed as carbon-matrix when PA molecules decompose. The above structural evolution of large cross-linked network and reconstructing process is rigorously analyzed through the characterization methods such as XPS. These analysis results indicate that FeCoNi-PA-300 possesses a high degree of amorphization, an abundant nanoporous structure, and a small nanoparticle size, resulting in a large electrochemically active area. Consequently, FeCoNi-PA-300 just needs low overpotentials of about 271 mV and 286 mV to obtain the current densities of 50 and 100 mA cm-2, respectively. Meaningfully, this synthetic method is a general strategy to meliorate the OER activity and electrical conductivity of other catalysts.

Mastering the D-Band Center of Iron-Series Metal-Based Electrocatalysts for Enhanced Electrocatalytic Water Splitting

The development of non-noble metal-based electrocatalysts with high performance for hydrogen evolution reaction and oxygen evolution reaction is highly desirable in advancing electrocatalytic water-splitting technology but proves to be challenging. One promising way to improve the catalytic activity is to tailor the d-band center. This approach can facilitate the adsorption of intermediates and promote the formation of active species on surfaces. This review summarizes the role and development of the d-band center of materials based on iron-series metals used in electrocatalytic water splitting. It mainly focuses on the influence of the change in the d-band centers of different composites of iron-based materials on the performance of electrocatalysis. First, the iron-series compounds that are commonly used in electrocatalytic water splitting are summarized. Then, the main factors affecting the electrocatalytic performances of these materials are described. Furthermore, the relationships among the above factors and the d-band centers of materials based on iron-series metals and the d-band center theory are introduced. Finally, conclusions and perspectives on remaining challenges and future directions are given. Such information can be helpful for adjusting the active centers of catalysts and improving electrochemical efficiencies in future works.

Supported Iridium-based Oxygen Evolution Reaction Electrocatalysts - Recent Developments

The commercialization of acidic proton exchange membrane water electrolyzers (PEMWE) is heavily hindered by the price and scarcity of oxygen evolution reaction (OER) catalyst, i. e. iridium and its oxides. One of the solutions to enhance the utilization of this precious metal is to use a support to distribute well dispersed Ir nanoparticles. In addition, adequately chosen support can also impact the activity and stability of the catalyst. However, not many materials can sustain the oxidative and acidic conditions of OER in PEMWE. Hereby, we critically and extensively review the different materials proposed as possible supports for OER in acidic media and the effect they have on iridium performances.

N-Doped Carbon as a Promoted Substrate for Ir Nanoclusters toward Hydrogen Oxidation in Alkaline Electrolytes

Development of effective electrocatalysts toward hydrogen oxidation with a low content of noble metals has attracted the attention of the catalytic community. In this work, a novel catalyst composed of nitrogen-doped carbon acting as the substrate and Ir nanoclusters as active species was prepared, which was then employed as an effective catalyst for the hydrogen oxidation reaction (HOR) in an alkaline electrolyte. In 0.1 M KOH, the optimized catalyst provides an exchange current density of 0.144 mA cm_Ir^-2 for HOR that outperforms the catalytic activity of the commercial Pt/C catalyst with a Pt content of 20 wt %. The substrate induces highly active Ir sites that markedly boosted the electrocatalytic activity for HOR. The nitrogen-doped carbon substrate increases the stability of Ir nanoclusters and decreases the absorption energy of hydrogen on Ir sites; at the same time, the higher electrostatic potential around the adsorbed hydrogen on Ir/N-doped carbon also enables them to be easily attracted by OH^- species, both of which enhanced the catalytic activity. The excellent catalytic activity and the understanding shown here will give some hints for the development of HOR catalysts used in alkaline electrolytes.

Tuning the Electronic Structure of Cobalt Selenide on Copper Foam by Introducing a Ni Buffer Layer for Highly Efficient Electrochemical Water Splitting

The development of a cost-effective, remarkably competent, and durable bifunctional electrocatalyst is the foremost requirement of water splitting to generate H₂ fuel as a renewable energy technology. Three-dimensional porous copper foam (Cuf) when electrochemically decorated with transition metal selenide results in a highly active electrocatalyst for adequate water electrolysis. In terms of water splitting, the role of cobalt selenide and Cuf has already proven to be remarkable. The introduction of a Ni buffer layer between Cuf and cobalt selenide (Cuf@Ni-CoSe₂) acts as a valve to enhance the electron thrust from the substrate to the material surface with no compromise in the overall material conductivity, which not only increases the efficiency and activity but also improves the stability of the catalyst. The self-supported synthesized catalyst material showed an admirable activity toward the oxygen evolution reaction and hydrogen evolution reaction in alkaline media. The performance of the catalyst was found to be significantly better than that of the noble catalyst RuO₂. The catalyst was very stable up to 93 h and attained a full cell voltage of only 1.52 V at a current density of 10 mA cm^-2. Therefore, for large-scale hydrogen production, this as-synthesized catalyst hss the potential to replace conventional fossil fuel-based energy systems.

Superionic conductor Ag2Se modulated CoSe2 nanosheets prepared via monometallic cation release for efficient pH-universal water electrolysis into hydrogen

Superionic conductors regulated transition metal chalcogenides are the newly emerged electrocatalyst in water electrolysis into clean hydrogen and oxygen. However, there is still much room for the development of structural design, electronic modulation and heterogeneous interface construction to improve the overall water splitting performance in pH-universal solutions, especially in alkaline and neutral mediums. Herein, using β-cyclodextrin (β-CD) and citric acid (CA) organics with abundant hydroxyl (-OH) and carboxyl (-COOH), a special Ag₂Se nanoparticles-decorated CoSe₂ flower-like nanosheets loaded on porous and conductive nickel foam substrate (Ag₂Se-CoSe₂/NF) was successfully constructed by a new method of monometallic cation release of coordinated cobalt. The Ag₂Se phase exerts the nature characteristics of superionic conductors to modulate the morphological and electronic structures of CoSe₂ as well as improve its conductivity. The generated rich active interfaces and abundant Se vacancy defects facilitate numerous active sites exposure to accelerate the hydrogen ion transport and charge transfer. Compared to the single-phase Ag₂Se/NF-8 and CoSe₂/NF, the prepared Ag₂Se-CoSe₂/NF-8 with a two-phase synergistic effect achieves an outstanding pH-universal electrocatalytic hydrogen production performance by water electrolysis, as evidenced by a lower overpotential (60 mV, 212 mV and 85 mV vs RHE at 10 mA cm^-2 for pH = 0.36, 7.00 and 13.70, respectively). Only a voltage of 1.55 V at 10 mA cm^-2 is required to implement the overall water splitting in an alkaline electrolyzer. This work provides significant guidance for the future designation and practical development of transition metal chalcogenides with superionic conductors applied in the electrocatalytic field.

Electrochemical preparation of nano/micron structure transition metal-based catalysts for the oxygen evolution reaction

Electrochemical water splitting is a promising technology for hydrogen production and sustainable energy conversion, but the existing electrolytic cells lack a sufficient number of robust and highly active anodic electrodes for the oxygen evolution reaction (OER). Electrochemical synthesis technology provides a feasible route for the preparation of independent OER electrodes with high utilization of active sites, fast mass transfer, and a simple preparation process. A comprehensive review of the electrochemical synthesis of nano/microstructure transition metal-based OER materials is provided. First, some fundamentals of electrochemical synthesis are introduced, including electrochemical synthesis strategies, electrochemical synthesis substrates, the electrolyte used in electrochemical synthesis, and the combination of electrochemical synthesis and other synthesis methods. Second, the morphology and properties of electrochemical synthetic materials are summarized and introduced from the viewpoint of structural design. Then, the latest progress regarding the development of transition metal-based OER electrocatalysts is reviewed, including the classification of metals/alloys, oxides, hydroxides, sulfides, phosphides, selenides, and other transition metal compounds. In addition, the oxygen evolution mechanism and rate-determining steps of transition metal-based catalysts are also discussed. Finally, the advantages, challenges, and opportunities regarding the application of electrochemical techniques in the synthesis of transition metal-based OER electrocatalysts are summarized. This review can provide inspiration for researchers and promote the development of water splitting technology.

Dissociation of Pyridinethiolate Ligands during Hydrogen Evolution Reactions of Ni-Based Catalysts: Evidence from X-ray Absorption Spectroscopy

The protonation of several Ni-centered pyridine-2-thiolate photocatalysts for hydrogen evolution is investigated using X-ray absorption spectroscopy (XAS). While protonation of the pyridinethiolate ligand was previously thought to result in partial dechelation from the metal at the pyridyl N site, we instead observe complete dissociation of the protonated ligand and replacement by solvent molecules. A combination of Ni K-edge and S K-edge XAS of the catalyst Ni(bpy)(pyS)₂ (bpy = 2,2′-bipyridine; pyS = pyridine-2-thiolate) identifies the structure of the fully protonated catalyst as a solvated [Ni(bpy)(DMF)₄]²⁺ (DMF = dimethylformamide) complex and the dissociated ligands as the N-protonated 2-thiopyridone (pyS-H). This surprising result is further supported by UV–vis absorption spectroscopy and DFT calculations and is demonstrated for additional catalyst structures and solvent environments using a combination of XAS and UV–vis spectroscopy. Following protonation, electrochemical measurements indicate that the solvated Ni bipyridine complex acts as the primary electron-accepting species during photocatalysis, resulting in separate protonated ligand and reduced Ni species. The role of ligand dissociation is considered in the larger context of the hydrogen evolution reaction (HER) mechanism. As neither the pyS-H ligand nor the Ni bipyridine complex acts as an efficient HER catalyst alone, the critical role of ligand coordination is highlighted. This suggests that shifting the equilibrium toward bound species by addition of excess protonated ligand (2-thiopyridone) may improve the performance of pyridinethiolate-containing catalysts.

Protonation of hydrogen-evolving Ni pyridinethiolate catalysts is investigated using X-ray absorption spectroscopy supported by UV−vis absorption spectroscopy and density functional theory. While pyridinethiolate ligand protonation was previously assumed to result in a partially coordinated species with a dissociated Ni−N bond, it is instead observed here to fully dissociate from the metal. The results are considered in the context of the electro- and photocatalytic hydrogen evolution reaction mechanisms of Ni pyridinethiolate complexes.

Electrochemical Corrosion Behavior of Ni–TiO2 Composite Coatings Electrodeposited from a Deep Eutectic Solvent-Based Electrolyte

The need to develop new electrochemical energy storage and conversion devices requires the creation of new, available, low-cost and high-performance electrocatalytic materials, which can be produced as coatings by electrodeposition technique. The electrodeposited composite coatings based on nickel seem to be very promising in this context. We studied the corrosion resistance of electrocatalytic Ni–TiO2 composite coatings fabricated by electrodeposition method using a plating solution based on deep eutectic solvents, a new environmentally friendly and affordable type of room-temperature ionic liquids. We investigated the corrosion behavior of Ni and Ni–TiO2 coatings (5 and 10 wt.% of TiO2) in a 3% NaCl aqueous solution as a corrosive medium. The corrosion parameters were determined by linear voltammetry and electrochemical impedance spectroscopy. It was established that the inclusion of titania particles in the Ni matrix and an increase in their content in the coating leads to a shift in corrosion potential towards positive values, a decrease in corrosion current density and an increase in polarization resistance. The observed effects of improving the corrosion resistance of coatings are associated with the barrier action of particles of the dispersed phase and the formation of corrosion microcells contributing to the inhibition of local corrosion.

Confining High-Valence Iridium Single Sites onto Nickel Oxyhydroxide for Robust Oxygen Evolution

Enhancing activity and stability of iridium- (Ir-) based oxygen evolution reaction (OER) catalysts is of great significance in practice. Here, we report a vacancy-rich nickel hydroxide stabilized Ir single-atom catalyst (Ir₁-Ni(OH)₂), which achieves long-term OER stability over 260 h and much higher mass activity than commercial IrO₂ in alkaline media. In situ X-ray absorption spectroscopy analysis certifies the obvious structure reconstruction of catalyst in OER. As a result, an active structure in which high-valence and peripheral oxygen ligands-rich Ir sites are confined onto the nickel oxyhydroxide surface is formed. In addition, the precise introduction of atomized Ir not only surmounts the large-range dissolution and agglomeration of Ir but also suppresses the dissolution of substrate in OER. Theoretical calculations further account for the activation of Ir single atoms and the promotion of oxygen generation by high-valence Ir, and they reveal that the deprotonation process of adsorbed OH is rate-determining.

What is Next in Anion-Exchange Membrane Water Electrolyzers? Bottlenecks, Benefits, and Future

As highlighted by the recent roadmaps from the European Union and the United States, water electrolysis is the most valuable high-intensity technology for producing green hydrogen. Currently, two commercial low-temperature water electrolyzer technologies exist: alkaline water electrolyzer (A-WE) and proton-exchange membrane water electrolyzer (PEM-WE). However, both have major drawbacks. A-WE shows low productivity and efficiency, while PEM-WE uses a significant amount of critical raw materials. Lately, the use of anion-exchange membrane water electrolyzers (AEM-WE) has been proposed to overcome the limitations of the current commercial systems. AEM-WE could become the cornerstone to achieve an intense, safe, and resilient green hydrogen production to fulfill the hydrogen targets to achieve the 2050 decarbonization goals. Here, the status of AEM-WE development is discussed, with a focus on the most critical aspects for research and highlighting the potential routes for overcoming the remaining issues. The Review closes with the future perspective on the AEM-WE research indicating the targets to be achieved.

Tuning the Polarity of a Fibrous Poly(vinylidene fluoride-co-hexafluoropropylene)-Based Support for Efficient Water Electrolysis

Water electrolysis under alkaline conditions is of interest due to the applicability of non-precious metal-based materials for electrocatalysts. However, the successful design and synthesis of earth-abundant and efficient catalysts for the oxygen evolution reaction (OER) remain a significant challenge. This work presents cost-effective and straightforward ways to improve the OER activity under alkaline conditions by activating the catalyst-support and reactant-support interaction. Micro/nano-sized fibrous poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) was synthesized via simple and scalable electrospinning and subsequently coated with Cu by electroless deposition to obtain the electrocatalyst with a large specific surface area, enhanced mass transport, and high catalyst utilization. Scanning electron microscopy, infrared spectroscopy, and X-ray diffraction confirmed the successful synthesis of the series of Cu/PVdF-HFP fibrous catalysts with varied ferroelectric polarizability of the PVdF-HFP support in the order of stretch-anneal > anneal > stretch > without pre-treatment of the catalyst. The best OER activity was confirmed for the Cu/PVdF-HFP catalyst with stretch and annealed treatment among the catalysts tested, suggesting that both the reaction kinetics and energetics of stretch-annealed Cu/PVdF-HFP catalysts were optimal for the OER. The electron delocalization between Cu and PVdF-HFP substrates (electron transfer from Cu to the negatively charged (δ^- _eff) PVdF-HFP region at the Cu|PVdF-HFP interface) and the enhanced transport of reactive hydroxide species and/or the increase in the local pH by positively charged (δ⁺ _eff) PVdF-HFP region concertedly accelerate the OER activity. The overall activity for the prototype water electrolyzer increased 10-fold with stretch-anneal treatment compared to the one without pre-treatment, highlighting the effect of tuning the catalyst-support and reactant-support interaction on improving the efficiency of the water electrolysis.

Electrodeposition of Complex High Entropy Oxides via Water Droplet Formation and Conversion to Crystalline Alloy Nanoparticles

A combination of electrodeposition and thermal reduction methods have been utilized for the synthesis of ligand-free FeNiCo alloy nanoparticles through a high-entropy oxide intermediate. These phases are of great interest to the electrocatalysis community, especially when formed by a sustainable chemistry method. This is successfully achieved by first forming a complex five element amorphous FeNiCoCrMn high-entropy oxide (HEO) phase via electrodeposition from a nanodroplet emulsion solution of the metal salt reactants. The amorphous oxide phase is then thermally treated and reduced at 570-600 °C to form the crystalline FeNiCo alloy with a separate CrMnO_x cophase. The FeNiCo alloy is fully characterized by scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy elemental analysis and is identified as a face-centered cubic crystal with the lattice constant a = 3.52 Å. The unoptimized, ligand-free FeNiCo NPs activity toward the oxygen evolution reaction is evaluated in alkaline solution and found to have an ∼185 mV more cathodic onset potential than the Pt metal. Beyond being able to synthesize highly crystalline, ligand-free FeNiCo nanoparticles, the demonstrated and relatively simple two-step process is ideal for the synthesis of tailor-made nanoparticles where the desired composition is not easily achieved with classical solution-based chemistries.

Exploring multifunctional behaviour of g-C3N4 decorated BiVO4/Ag2CO3 hierarchical nanocomposite for simultaneous electrochemical detection of two nitroaromatic compounds and water splitting applications

Development of multifunctional ternary nanocomposite based electrocatalysts for detection of toxic elements and generation of renewable energy describes an environmentally sustainable technique to address the dual challenges of pollution and energy. Herein, we adopted microwave-assisted synthesis to design a multifunctional graphitic carbon nitride (g-C₃N₄) decorated BiVO₄/Ag₂CO₃ (BVG@C) hierarchical ternary nanocomposite for sensing and water splitting applications. The morphological, structural and elemental characterizations demonstrate the successful decoration of carbon nitride on the composite surface. The electrochemical activity of BVG@C modified glassy carbon electrode reveals excellent redox behaviour towards simultaneous detection of 4-Nitrophenol (4-NP) and 4-Nitroaniline (PNA). The modified electrode shows rapid amperometric current response with high sensitivity of 2.368 μA mM cm^-2 and 1.534 mA mM cm^-2 and low detection limit of 0.012 μmol L^-1and 0.028 μmol L^-1, respectively for 4-NP and PNA. Moreover, the modified electrode was further investigated for hydrogen evolution and oxygen evolution reactions and the electrocatalytic results show admirable activity and good stability for oxygen evolution with very low overpotential of 136 mV in alkaline medium. It is worthwhile to mention that the excellent activity of electrocatalyst can be ascribed to the decoration and electronic interaction of g-C₃N₄ with the BiVO₄/Ag₂CO₃ nanocomposite, increasing its surface area, active sites, charge transfer and decreasing resistance.