The brown algae Cystoseira Baccata extract as a friendly corrosion inhibitor on carbon steel in acidic media

Experimental accompanied with computational (atomic/electronic)-level simulation investigations of Polygonum cuspidatum root extract as sustainable corrosion inhibitor for mild steel in aggressive corrosive media

This study investigates the corrosion inhibition potential of Polygonum cuspidatum root extract (PCRE) on mild steel in a 0.5 M HCl acidic environment. Herein, various techniques including electrochemical and gravimetric measurements were employed, along with scanning electron microscopy (SEM) and contact angle (CA) measurements for surface morphology analysis. The impedance study revealed a concentration-dependent enhancement in corrosion resistance, classifying PCRE as a mixed-type inhibitor (i.e., inhibits both anodic and cathodic reactions). The highest efficiency, 96.71% at 298 K, was observed at a 1000-ppm PCRE concentration. Langmuir model computations suggested chemisorption and physisorption of PCRE on the electrode substrate. Increased Rp (from 28.648 to 174.01 Ω) and Rct (185.74 Ω cm2) at 1000 ppm demonstrated improved corrosion resistance. Additionally, SEM analysis displayed a uniform, protective surface, reducing metal degradation. Theoretical calculations highlighted strong interactions between PCRE and mild steel, with a low energy gap (ΔE), as follows: 1-O-methylemodin (2.267 eV) < emodin (2.288 eV) < emodin-1-O-glucoside (2.343 eV) < piceid (2.931 eV) < resveratrol (2.952 eV), confirming PCRE's excellent micro-level anti-corrosion capabilities. This eco-benign corrosion inhibitor offers sustainable, low-toxicity protection, cost-effectiveness, and versatile performance, surpassing commercial counterparts while aligning with sustainability goals.

Enhanced antibacterial and corrosion resistance of copper-containing 2205 duplex stainless steel against the corrosive bacterium Shewanella algae

2205 DSS is an excellent corrosion-resistant engineering metal material, but it is still threatened by microbiological corrosion. The addition of copper elements is a new approach to improving the resistance of 2205 DSS to microbiological corrosion. In this study, 2205-Cu DSS was compared with 2205 DSS to study its antimicrobial properties and resistance to microbiological corrosion in the presence of the electroactive bacterium Shewanella algae. The results showed that compared to 2205 DSS, the biofilm thickness and the number of live bacteria on the surface of 2205-Cu DSS were significantly reduced, demonstrating excellent antimicrobial properties against S. algae. Electrochemical tests and surface morphology characterization results showed that the corrosion rate and pitting of 2205-Cu DSS by S. algae were lower than that of 2205 DSS, indicating better resistance to microbiological corrosion. The good antimicrobial properties and resistance to microbiological corrosion exhibited by 2205-Cu DSS are attributed to the contact antimicrobial properties of copper elements in the 2205-Cu DSS matrix and the release of copper ions for antimicrobial effects. This study provides a new strategy for combating microbiological corrosion.

Antimicrobial and anti-biofilm activity of silver nanoparticles biosynthesized with Cystoseira algae extracts

Antimicrobial resistance is an ever-growing global concern to public health with no clear or immediate solution. Silver nanoparticles (AgNPs) have long been proposed as efficient agents to fight the growing number of antibiotic-resistant strains. However, the synthesis of these particles is often linked to high costs and the use of toxic, hazardous chemicals, with environmental and health impact. In this study, we successfully produced AgNPs by green synthesis with the aid of the extract of two brown algae-Cystoseira baccata (CB) and Cystoseira tamariscifolia (CT)-and characterized their physico-chemical properties. The NPs produced in both cases (Ag@CB and Ag@CT) present similar sizes, with mean diameters of around 22 nm. The antioxidant activity of the extracts and the NPs was evaluated, with the extracts showing important antioxidant activity. The bacteriostatic and bactericidal properties of both Ag@CB and Ag@CT were tested and compared with gold NPs produced in the same algae extracts as previously reported. AgNPs demonstrated the strongest bacteriostatic and bactericidal properties, at concentrations as low as 2.16 µg/mL against Pseudomonas aeruginosa and Escherichia coli. Finally, the capacity of these samples to prevent the formation of biofilms characteristic of infections with a poorer outcome was assessed, obtaining similar results. This work points towards an alternative for the treatment of bacterial infections, even biofilm-inducing, with the possibility of minimizing the risk of drug resistance, albeit the necessary caution implied using metallic NPs.

Effect of marine microalgae Synechococcus sp., Chlorella sp., Thalassiosira sp. on corrosion behavior of Q235 carbon steel in f/2 medium

The effect of marine microalgae on the corrosion behavior of carbon steel (CS) still needs further investigation due to their dual roles. In this study, the corrosion behavior of Q235 CS specimens in f/2 medium with absence and presence of three classes of marine microalgae Synechococcus sp., Chlorella sp., and Thalassiosira sp. was investigated during a 16-day immersion period by the weight loss, electrochemical impedance spectroscopy, potentiodynamic polarization curve, and surface analysis techniques. The biomass of the three microalgae was monitored at the same time. The results showed that the values of weight loss and corrosion current density decreased, and the values of charge transfer resistance increased in the CS specimens treated with these microalgae. On day 16, the inhibition efficiency of Thalassiosira sp. group was the highest (80.78%), followed by Chlorella sp. group (70.80%), and finally Synechococcus sp. group (69.38%). But the inhibition efficiency diminished with time. Furthermore, in these microalgal treatment groups, the passivation films were found to consist of a biofilm and a corrosion product film. This study revealed that the three microalgae can effectively strengthen the barrier of the CS specimens in the f/2 medium, leading to slow down their corrosion rates.

Corrosion Inhibition of Carob Pod Pulp (Ceratonia siliqua L.) on Carbon Steel Surface C38 in Hydrochloric Acid

The effect of C. siliqua pulp corrosion inhibition on carbon steel has been studied by gravimetric testing and electrochemical methods. In this study, two raw extracts were prepared from the pod pulp of C. siliqua: the first is methanolic and the second is aqueous. The UHPLC/DAD analysis indicated gallic acid's presence in the extracts (methanolic and aqueous) of C. siliqua as a major compound. The inhibition results achieved revealed that the aqueous extract with gallic acid had a good anticorrosion activity with an inhibition rate of 91.32% at 3 g/l for a temperature of 323 K. Potentiodynamic polarization was performed in 1 M HCl without and with different concentrations of C. siliqua extracts clearly proves that inhibitor extracts behave as mixed type. Adsorption of this inhibitor for different extracts studied on the surface of the carbon steel obeys Langmuir adsorption with negative values of Δ G ads ∘ , suggesting a stable and spontaneous inhibition process.

Characterization and utilization of Sargassum linifolium and Stypopodium schimperi polysaccharides as blue inhibitors for steel electo-polishing

Different polysaccharide extracts (crude polysaccharide, fucoidan and alginate) from Sargassum linifolium and Stypopodium schimperi were examined as inhibitors of the carbon steel anodic dissolution process in 8 M phosphoric acid. The anode potential and limiting current relationship was measured and compared for gradually increasing algae extract concentrations (from 20 to 350 ppm). The limiting current decreases while inhibition efficiency (%) increases as the concentrations of all these extracts increase. Fucoidan from S. linifolium is considered to have the most retardation effect. The extracts' retardation mechanism is depending on the adsorption process at the steel metal, which was proved by scanning electron microscopy (SEM). Also, SEM shows that high concentration (350 ppm) of Stypopodium schimperi crude polysaccharide, Sargassum linifolium fucoidan and Stypopodium schimperi alginate extracts have promising effect on the surface texture. The data of Langmuir and the kinetic-thermodynamic isotherms were determined to clarify the nature of adsorption of extract on the metal-solution interface. The activation energy and activation parameters (changes in enthalpy, entropy and Gibbs free energy) were determined and gave indication for strong interaction between the inhibitor and the steel surface. The extract features were investigated via Fourier transform infrared spectroscopy. The polysaccharides from the brown algae, especially fucoidan, manifest potential as a natural electro-polishing blue inhibitor. Surface morphology study confirmed that addition of algae extract to a steel dissolution bath enhanced the surface appearance and its texture quality to great extent.

Thermodynamics, adsorption, and response surface methodology investigation of the corrosion inhibition of aluminum by Terminalia chebula Ritz. extract in H3PO4

This study focuses on investigating the effect of Terminalia chebula Ritz. extract (TCE) for corrosion inhibition of Al in phosphoric acid (H3PO4) using potentiodynamic polarization (PDP) technique. In this study, the effect of concentration of TCE extract, the concentration of H3PO4 acid medium, and temperature (T) was investigated on the corrosion current density (icorr) and inhibition efficiency (IE). The TCE was characterized by FTIR analysis, and the adsorption of TCE was justified with the help of kinetic, thermodynamic, adsorption isotherm parameters. The surface morphology study was done using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDXS), and atomic force microscopy (AFM). The study also focuses on identifying the optimum process parameters for obtaining the maximum IE by applying the response surface methodology (RSM) and desirability function approach. The maximum IE of 83.24% was achieved at a temperature of 30 ℃, the concentration of TCE extract of 500 ppm, and H3PO4 acid concentration of 0.5 M. Regression analysis, Pareto chart, normal chart, main effect, and interaction effect plots are employed to acquire an in-depth understanding of process variables on IE. The IE obtained from the experiments and the predicted model is in a close match and a high value of the coefficient of determination (R2 = 99.98%) displays that the generated model was able to estimate the IE accurately from the selected process variables.