A classification of skeletal facial types

Influence of maxillofacial skeletal morphology on difficult laryngoscopy

BACKGROUND

Although mandibular retrognathia has been recognized as one of the predictors of difficult laryngoscopy, its definition remains vague, with no clearly established skeletal evaluation systems. The Sassouni classification system, used to categorize the maxillofacial morphology systematically (nine types), can be easily performed using preoperative radiographic findings. This study aimed to investigate the relationship between difficult laryngoscopy and Sassouni type 5, a group characterized by a small mandible and a large overbite.

METHODS

This retrospective study comprised patients diagnosed with jaw deformities who underwent orthognathic surgery for malocclusion under general anesthesia at our clinic. The patients were divided into two groups: Sassouni 5 and non-Sassouni 5 (types 1, 2, 3, 4, 6, 7, 8, and 9). Difficult laryngoscopy was evaluated by examining the degree of difficulty in laryngeal exposure, which was defined as grades 3 and 4 based on the Cormack-Lehane (CL) classification. Additionally, we evaluated the relationships between the Sassouni 5 group and three predictors of difficult laryngoscopy (Mallampati classification, Wilson score, and hyomental distance [HMD]).

RESULTS

Of the 187 patients included in this study, 44 belonged to the Sassouni 5 group, and the remaining 143 belonged to the non-Sassouni 5 group. The proportion of patients with CL grade 3 or higher was significantly higher in the Sassouni 5 group (n = 9; 20.5%) than in the non-Sassouni 5 group (n = 6; 4.2%). Furthermore, 10 (22.7%) patients in the Sassouni 5 group had a Mallampati score of 3 or higher, 44 (100%) had a Wilson score of 2 or higher, and 38 (96.7%) had an HMD of less than 3 fingerbreadths. The corresponding numbers in the non-Sassouni 5 group were 8 (5.6%), 48 (33.6%), and 43 (30.1%), respectively. The incidence of difficult laryngoscopy in the Sassouni 5 group was significantly higher than that in the non-Sassouni 5 group (p < 0.001).

CONCLUSIONS

These findings indicate that the incidence of difficult laryngoscopy can be predicted using the Sassouni classification, which can be easily analyzed using lateral cephalograms obtained routinely before corrective surgical procedures. The Sassouni 5 group could be used as an important predictive tool in clinical practice.

Oral health related quality of life in different types of skeletal malocclusion

PURPOSE

The purpose of this study was to evaluate differences in Oral Health-Related Quality of Life (OHRQoL) among orthognathic patients with different skeletal malocclusions before initiating orthodontic treatment.

METHODS

150 patients were evaluated for OHRQoL at the Oral and Maxillofacial Surgery Department at Boston University Goldman School of Dental Medicine. OHRQoL was measured using: (1) Oral Health Impact Profile-14 (OHIP-14) for generic OHRQoL; (2) Orthognathic Quality of Life Questionnaire (OQLQ) for condition-specific OHRQoL; and (3) the 12-item oral quality of life instrument (12-item OQOL) for generic OHRQoL. Cephalometric measurements were used to categorize facial types then two-sample t-tests and one-way ANOVAs were employed to analyze OHRQoL across groups.

RESULTS

OHIP-14, OQLQ, and 12-item OQOL baseline scores were statistically different between skeletal Class I, II, and III patients (p < 0.05), with Class II patients showing the highest scores. No significant differences were found between vertical patterns (p > 0.05).

CONCLUSION

OHRQoL is different between skeletal Class I, II, and III patients with Class II patients reporting lower quality of life.

Non-extraction camouflage on a fully cooperative full-step class II division 2 adult patient treated with en-masse distalization, class II elastics and preadjusted lingual appliance: A case report

This article describes one adult bilateral full-step class II case with severe initial upper incisors retroclination successfully treated by a completely invisible lingual appliance. A non-extraction treatment to compensate for the severe sagittal discrepancy was made possible following the excellent patient cooperation with intermaxillary elastics, combined with upper arch en-masse effective distalization with miniscrews. The application of an auxiliary torque spring was essential to increase upper incisors torque during class II mechanics. This case report shows the possibility of obtaining a full-step class II correction in an hypodivergent adult patient with a completely invisible appliance, taking advantage for the patient cooperation, for a more straightforward and faster non-extraction case resolution. It also underlines on the other hand the importance of successfully controlling incisors torque with auxiliaries in cases of severe retroclination in an adult class II malocclusion, in combination with the simultaneous distalization mechanics for monolateral full-step class II correction, by means of a completely invisible appliance.

A new harmony box supplemented with gonial angle and age based on a growing Swiss population

PURPOSE

The scope of the present study was to create a new harmony box by adding two diagnostically and clinically important cephalometric variables, the gonial and interincisal angles, while also considering the effect of sex and age for a growing Swiss population.

METHODS

A healthy sample with an overjet and overbite between 2 and 4 mm, and 1.5 and 4.5 mm, respectively, of the Zurich Craniofacial Growth Study was considered. Pairwise correlations between the cephalometric angles were evaluated with the Pearson correlation coefficient (r). Regression models were built for each cephalometric variable serving as the dependent one. The Akaike Information Criterion and the Bayesian Information Criterion were used to structure and select the final multivariable regression model. Bland-Altman plots and the Lin's concordance correlation coefficient were used to assess inter- and intraexaminer agreement.

RESULTS

The sample consisted of 301 individuals with a mean age of 13.4 years. Measurement concordance was confirmed both within and between examiners. The strongest correlations were observed between the angles SNB and SNA (r = 0.81), ArGoMe and SN-ML (r = 0.57), and SN-ML and SNB (r = 0.56). The SNB angle qualified as the dependent variable in the multivariable regression that framed the newly provided harmony box, with the predictor variables age (p < 0.001) and the angles SNA (p < 0.001), SN-ML (p < 0.001), SN-NL (p = 0.005), NSBa (p = 0.001), and ArGoMe (p < 0.001). The interincisal angle did not increase the robustness of the model and was excluded (p > 0.05).

CONCLUSION

Contrary to the interincisal angle, gonial angle and age qualified for inclusion in the new harmony box for individualized cephalometrics in a sample of healthy schoolchildren from Zurich, Switzerland.

Is occlusal contact re-established within 6 months after bonding of a fixed anterior bite plane in adolescents with a Class II division 2 incisor relationship? A randomised controlled trial

OBJECTIVE

To determine if re-establishment of occlusal contact was achieved within 6 months after insertion of a fixed anterior bite plane in individuals with Class II division 2 incisor relationship, and to evaluate the occlusal and vertical skeletal changes and acceptance of the intra-oral scanner and bite plane.

DESIGN

Single-centre two-arm parallel group randomised controlled trial with 1:1 allocation to intervention and control groups.

SETTING

Dundee Dental Hospital and Research School, UK.

PARTICIPANTS

A total of 38 participants aged 9-16 years (11 males, 27 females) with Class II division 2 incisor relationship and increased overbite (greater than one-third incisor overlap).

METHODS

Participants were randomised to intervention (n = 19) and control (n = 19) groups using block randomisation. The intervention group had a fixed anterior bite plane, and the occlusion and vertical facial dimensions were monitored with intra-oral scans, lateral cephalograms and photographs. The control group received no treatment and occlusal and vertical facial dimensions were monitored with scans and photographs. Questionnaires were completed by participants and parents/carers. An intention-to-treat analysis was planned.

RESULTS

The overbite reduced in all participants in the intervention group (mean initial overbite: 5.07 mm, 95% confidence interval [CI] = 4.15-6.00; mean overbite after 6 months: 2.45 mm, 95% CI = 1.93-2.96). There was a mean incisor intrusion of 0.29 mm (95% CI = 0.17-0.42) and mean eruption of the first molars of 0.23 mm (95% CI = 0.09-0.37). There was no significant change in incisor inclination or vertical skeletal change. Feedback from participants and their parents/carers were generally positive.

CONCLUSION

Fixed anterior bite planes effectively reduce an increased overbite in adolescents with a Class II division 2 incisor relationship, due to a combination of incisor intrusion and molar eruption with no change in incisor inclination or vertical skeletal change. Intra-oral scanning and fixed anterior bite planes are acceptable in adolescents.

Relationship between craniofacial skeletal patterns and anatomic characteristics of masticatory muscles: a systematic review and meta-analysis

BACKGROUND

The anatomic characteristics of the masticatory muscles differ across craniofacial skeletal patterns.

OBJECTIVE

To identify differences in the anatomic characteristics of masticatory muscles across different sagittal and vertical craniofacial skeletal patterns.

ELIGIBILITY CRITERIA

Studies measuring the thickness, width, cross-sectional area (CSA), volume and orientation of masticatory muscles in healthy patients of different sagittal (Class I, Class II, and Class III) and/or vertical (normodivergent, hypodivergent, and hyperdivergent) patterns.

INFORMATION SOURCES

Unrestricted literature searches in 8 electronic databases/registers until December 2023.

RISK OF BIAS AND SYNTHESIS OF RESULTS

Study selection, data extraction, and risk of bias assessment with a customised tool were performed independently in duplicate. Random-effects meta-analysis and assessment of the certainty of clinical recommendations with the GRADE approach were conducted.

RESULTS

34 studies (37 publications) were selected with a total of 2047 participants and data from 16 studies were pulled in the meta-analysis. Masseter muscle thickness in relaxation was significantly greater by 1.14 mm (95% CI 0.74-1.53 mm) in hypodivergent compared to normodivergent patients while it was significantly decreased in hyperdivergent patients by - 1.14 mm (95% CI - 1.56 to - 0.73 mm) and - 2.28 mm (95% CI - 2.71 to - 1.85 mm) compared to normodivergent and hypodivergent patients respectively. Similar significant differences were seen between these groups in masseter muscle thickness during contraction as well as masseter muscle CSA and volume. Meta-analyses could not be performed for sagittal categorizations due to insufficient number of studies.

CONCLUSIONS

Considerable differences in masseter muscle thickness, CSA and volume were found across vertical skeletal configurations being significantly reduced in hyperdivergent patients; however, results should be interpreted with caution due to the high risk of bias of the included studies. These variations in the anatomic characteristics of masticatory muscles among different craniofacial patterns could be part of the orthodontic diagnosis and treatment planning process.

REGISTRATION

PROSPERO CRD42022371187 .

Engineering a targeted and safe bone anabolic gene therapy to treat osteoporosis in alveolar bone loss

Alveolar bone loss in elderly populations is highly prevalent and increases the risk of tooth loss, gum disease susceptibility, and facial deformity. Unfortunately, there are very limited treatment options available. Here, we developed a bone-targeted gene therapy that reverses alveolar bone loss in patients with osteoporosis by targeting the adaptor protein Schnurri-3 (SHN3). SHN3 is a promising therapeutic target for alveolar bone regeneration, because SHN3 expression is elevated in the mandible tissues of humans and mice with osteoporosis while deletion of SHN3 in mice greatly increases alveolar bone and tooth dentin mass. We used a bone-targeted recombinant adeno-associated virus (rAAV) carrying an artificial microRNA (miRNA) that silences SHN3 expression to restore alveolar bone loss in mouse models of both postmenopausal and senile osteoporosis by enhancing WNT signaling and osteoblast function. In addition, rAAV-mediated silencing of SHN3 enhanced bone formation and collagen production of human skeletal organoids in xenograft mice. Finally, rAAV expression in the mandible was tightly controlled via liver- and heart-specific miRNA-mediated repression or via a vibration-inducible mechanism. Collectively, our results demonstrate that AAV-based bone anabolic gene therapy is a promising strategy to treat alveolar bone loss in osteoporosis.

Evaluation of Buccolingual Inclinations of First Molars Among Different Vertical Facial Patterns in Class II Division I Subjects

Background Knowing the characteristics of vertical patterns is crucial to provide the best orthodontic treatment. Cone beam computed tomography (CBCT) offers a valuable tool for evaluating true buccolingual inclinations. The current study investigates the buccolingual inclination of first molars in adult subjects with different vertical facial patterns. Methods CBCT scans of 66 adult patients (31 males, 35 females) with a mean age of 31.6 years (SD: 6.4 years) exhibiting skeletal class II division I maxillomandibular relationships were employed. Participants were categorized into three groups based on linear and angular measurements: normodivergent group (n=22), hypodivergent group (n=22), and hyperdivergent group (n=22). The independent samples t-test and Mann-Whitney U-test were conducted to investigate statistical differences in terms of buccolingual inclination between the three vertical patterns. Results Statistically significant differences were observed in the buccolingual inclinations of both maxillary and mandibular first molars in the hypodivergent group compared to the other groups (p<0.05). Conclusions In patients with class II division I sagittal relationships, the buccolingual inclinations of the first molars exhibit similarities between normodivergent and hyperdivergent groups. However, these inclinations differ significantly in hypodivergent adult subjects.

Skeletal Anterior Open Bite Attenuates the Chewing-Related Increase in Brain Blood Flow

The masticatory function of patients with skeletal anterior open bite (OPEN) is reported to be impaired compared with that of patients with normal occlusion (NORM). In this study, we compared brain blood flow (BBF) in patients with OPEN and NORM and investigated the factors related to BBF during mastication in patients with OPEN. The study included 17 individuals with NORM and 33 patients with OPEN. The following data were collected: number of occlusal contacts, jaw movement variables during mastication, and BBF measured with functional near-infrared spectroscopy during chewing. The number of occlusal contacts, maximum closing and opening speeds, closing angle, and vertical amplitude were smaller in the OPEN than in the NORM group. Interestingly, BBF increased less in the OPEN group. Correlation analysis revealed that several parameters, including number of occlusal contacts and closing angle, were correlated with changes in BBF during mastication. These results suggest that not only occlusion but also jaw movement variables and factors related to masticatory muscles contribute to the chewing-related increase in BBF. In conclusion, BBF increases less during mastication in patients with OPEN than in those with NORM. In addition, the higher increase in BBF is correlated with jaw movement. Together, we discovered that OPEN exhibits significant adverse effects not only on masticatory function but also on brain function.

Three-Dimensional Evaluation of Treatment Effects and Post-Treatment Stability of Maxillary Molar Intrusion Using Temporary Anchorage Devices in Open Bite Malocclusion

Background: We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. Methods: The patients underwent maxillary molar intrusion using temporary anchorage devices (TADs) to deepen the overbite due to mandibular autorotation. Lateral cephalograms and dental cast models were obtained before treatment (T0), immediately after it (T1), and >1 year after it (T2). Skeletal and dental cephalometric changes and three-dimensional movements of the maxillary dentitions were evaluated. Results: At T0, cephalometric analysis indicated that patients had skeletal class I with tendencies for a class II jaw relationship and a skeletal open bite. During active treatment (T0 to T1), the maxillary first molar intruded by 1.6 mm, the mandibular first molar extruded by 0.3 mm, the Frankfort-mandibular plane angle decreased by 1.1°, and the overbite increased by 4.1 mm. Statistically significant changes were observed in the amount of vertical movement of the maxillary first molar, Frankfort-mandibular plane angle, and overbite. Three-dimensional (3D) dental cast analysis revealed that the maxillary first and second molars intruded, whereas the anterior teeth extruded, with the second premolar as an infection point. In addition, the maxillary molar was tipped distally by 2.9° and rotated distally by 0.91°. Statistically significant changes were observed in the amount of vertical movement of the central incisor, lateral incisor, canine and first molar, and molar angulation. From T1 to T2, no significant changes in cephalometric measurements or the 3D position of the maxillary dentition were observed. The maxillary and mandibular dentitions did not significantly change during post-treatment follow-up. Conclusions: Maxillary molar intrusion using mini-screws is an effective treatment for open bite correction, with the achieved occlusion demonstrating 3D stability at least 1 year after treatment.

Dentoalveolar effects of skeletally anchored extrusion arch in anterior open bite patients: A prospective clinical trial

OBJECTIVE

The purpose of this prospective clinical trial was to explore the dental and soft tissue changes accompanying the use of skeletally anchored nickel-titanium (NiTi) extrusion arch in the correction of anterior open bite (AOB).

MATERIAL AND METHODS

Twenty female patients with a mean age of 16.5 ± 1.5 years and a mean dentoalveolar AOB of 2.38±0.7 mm participated in this study. All patients were treated with an maxillary 0.017×0.025-in NiTi extrusion arch, with the aid of miniscrews inserted between the maxillary second premolars and first molars bilaterally, to act as indirect anchorage. Three-dimensional digital models and lateral cephalometric radiographs were taken just before the insertion of the extrusion arch (T0) and after 10 months (T1). Paired-sample t-tests were used in analyzing the data, to evaluate the changes after treatment (T1-T0). A significance level of p < 0.05 was used.

RESULTS

AOB was successfully closed in all patients, with a 4.35 ± 0.61 mm increase in the overbite. Maxillary incisors significantly extruded (2.52 ± 1.02 mm) and significantly reclined (5.78 ± 0.77°), with a resultant decrease in the overjet of 1.58 ± 0.5mm. A significant intrusion of maxillary first molars with no change in their inclination was observed. The upper lip showed a significant retraction tendency to the E-plane, and a significant increase in the nasolabial angle was observed.

CONCLUSION

The skeletally anchored NiTi extrusion arch was an effective technique in treating AOB, with no adverse effects on the molars.

Facial profile evaluation and prediction of skeletal class II patients during camouflage extraction treatment: a pilot study

BACKGROUND

The evaluation of the facial profile of skeletal Class II patients with camouflage treatment is of great importance for patients and orthodontists. The aim of this study is to explore the key factors in evaluating the facial profile esthetics and to predict the posttreatment facial profile esthetics of skeletal Class II extraction patients.

METHODS

124 skeletal Class II extraction patients were included. The pretreatment and posttreatment cephalograms were analyzed by a trained expert orthodontist. The facial profile esthetics of pretreatment and posttreatment lateral photographs were evaluated by 10 expert orthodontists using the visual analog scale (VAS). The correlation between subjective facial profile esthetics and objective cephalometric measurements was assessed. Three machine-learning methods were used to predict posttreatment facial profile esthetics.

RESULTS

The distances from lower and upper lip to the E plane and U1-APo showed the stronger correlation with profile esthetics. The changes in lower lip to the E plane and U1-APo during extraction exhibited the stronger correlation with changes in VAS score (r = - 0.551 and r = - 0.469). The random forest prediction model had the lowest mean absolute error and root mean square error, demonstrating a better prediction accuracy and fitting effect. In this model, pretreatment upper lip to E plane, pretreatment Pog-NB and the change of U1-GAll were the most important variables in predicting the posttreatment score of facial profile esthetics.

CONCLUSIONS

The maxillary incisor protrusion and lower lip protrusion are key objective indicators for evaluating and predicting facial profile esthetics of skeletal Class II extraction patients. An artificial intelligence prediction model could be a new method for predicting the posttreatment esthetics of facial profiles.

Hard and soft tissue shape variation and changes in Class II division 1 malocclusion during orthodontic treatment: a geometric morphometric analysis

BACKGROUND

This study aims to determine the hard and soft tissue shape variation and its changes in Class II division 1 malocclusion before and after orthodontic treatment using Geometric Morphometric Analysis.

METHODS

This retrospective study included 141 pre-treatment and near-end treatment lateral cephalometric radiographs of Class II division 1 malocclusion patients aged 16-40 years with a skeletal II pattern (ANB > 4o). 32 landmarks in Cartesian coordinates were created and identified using MorphoJ software to establish a shape analysis.

RESULTS

The vertical dimensions (hypodivergent to hyperdivergent facial profiles) showed the largest variation in the general shape of hard and soft tissue, followed by the anteroposterior dimensions (mild to severe skeletal II patterns). Variations of lip shape (long to short), lip protuberance (everted to inverted), and nasolabial angle (obtuse to acute) were present. Orthodontic treatment affected the shape of the hard and soft tissue significantly (p < 0.0001). T2 showed significant uprighting of upper incisors (17.5o) and lower incisors (3.7o), improved NLA (8o), an increase in upper lip thickness (1.5 mm), and a reduction in lower lip thickness (0.7 mm) (p < 0.05).

CONCLUSION

Vertical and anteroposterior shape variations were found. Orthodontic treatment had an impact on both hard and soft tissue shapes. Hence, understanding both the hard and soft tissue shape variations and the orthodontic treatment changes is crucial for an accurate diagnosis and treatment plan to achieve a successful outcome and excellent patient satisfaction.

The Potency of Invisalign® in Class II Malocclusion in Adults: A Narrative Review

In recent years, a greater number of adult patients are seeking orthodontic treatment, not only for esthetics but for better functioning and hygiene purposes. However, they are more focused on comfortable and invisible treatment alternatives to conventional metal brackets. This abstract is a multifaceted interplay between Invisalign® and different treatments of class II malocclusion, which embarks on the potency of Invisalign® in treating this condition in adult patients. The review delves into analyzing the efficacy of Invisalign® in molar distalization, class II elastics, extraction treatment, class II division 2 patients, their limitations, challenges, and future prospects. This article aspires the orthodontists understand the complex nature of class II malocclusion treatment in adults with Invisalign® and its application in clinical practice with improved patient outcomes.

Differences in the 3-dimensional aging changes of the lips among female adults with skeletal Class I, II, and III malocclusion

INTRODUCTION

The objective of this study was to evaluate and compare the 3-dimensional (3D) aging changes of the lips among adult skeletal Class I, II, and III malocclusion.

METHODS

Female adult orthodontic patients aged 20-50 years with pretreatment cone-beam computed tomography scans were retrospectively classified according to age (20s [20-29 years], 30s [30-39 years], and 40s [40-49 years]) and then subclassified by malocclusion into skeletal Class I, II, and III relationship (9 groups; n = 30 per group). Positional differences in midsagittal and parasagittal soft-tissue landmarks and 3D morphologic aging changes of the lips were evaluated using cone-beam computed tomography scans.

RESULTS

Labiale superius and cheilion for patients in their 40s indicated a significant downward and backward position compared with those in their 20s, regardless of skeletal classifications (P <0.05). Accordingly, the upper lip height decreased, and the mouth width increased significantly (P <0.05). For Class III malocclusion, the upper lip vermilion angle was greater for patients in their 40s than those in their 20s (P <0.05), whereas the lower lip vermilion angle was only lower for patients with Class II malocclusion (P <0.05).

CONCLUSIONS

Middle-aged adult females (40-49 years) had a lower upper lip height and greater mouth width than those in their 20s, regardless of skeletal malocclusion. However, prominent morphologic aging changes of the lips were noted on the upper lip for skeletal Class III malocclusion and the lower lip for skeletal Class II malocclusion, implying that the underlying skeletal features (or malocclusion) may influence 3D aging changes of the lips.

Relationship between Changes in Condylar Morphology and Masticatory Muscle Volume after Skeletal Class II Surgery

The treatment of dentofacial deformities generally includes orthognathic surgery in which mandibular condyle changes following surgery are a common cause of relapse. This study investigated the changes in the mandibular condyle and related muscles to identify the factors that affected the changes in the mandibular condyle after orthognathic surgery in skeletal class II patients. This research studied 60 joints in 30 patients with skeletal class II dentofacial deformities who received surgical orthodontic treatment, including bilateral sagittal split ramus osteotomy, and underwent computed tomography before and after orthodontic treatment. The mandibular condyle, masseter, and medial pterygoid muscles were reconstructed and measured in 3D. Condylar positional and morphology changes, masseter and medial pterygoid muscle volume, temporomandibular joint (TMJ) pain, and distal segment movement were analyzed. The study observed that both the masseter and medial pterygoid muscle volumes decreased with statistical significance. The changes in the horizontal direction were positively correlated with the amount of movement. The findings indicated that mandibular condyle changes were significantly affected by the movement of the distal segment, the medial pterygoid muscle volume, and the direction of the distal segment, which influenced the treatment's long-term stability after orthognathic surgery.

Classification of Maxillofacial Morphology by Artificial Intelligence Using Cephalometric Analysis Measurements

The characteristics of maxillofacial morphology play a major role in orthodontic diagnosis and treatment planning. While Sassouni's classification scheme outlines different categories of maxillofacial morphology, there is no standardized approach to assigning these classifications to patients. This study aimed to create an artificial intelligence (AI) model that uses cephalometric analysis measurements to accurately classify maxillofacial morphology, allowing for the standardization of maxillofacial morphology classification. This study used the initial cephalograms of 220 patients aged 18 years or older. Three orthodontists classified the maxillofacial morphologies of 220 patients using eight measurements as the accurate classification. Using these eight cephalometric measurement points and the subject's gender as input features, a random forest classifier from the Python sci-kit learning package was trained and tested with a k-fold split of five to determine orthodontic classification; distinct models were created for horizontal-only, vertical-only, and combined maxillofacial morphology classification. The accuracy of the combined facial classification was 0.823 ± 0.060; for anteroposterior-only classification, the accuracy was 0.986 ± 0.011; and for the vertical-only classification, the accuracy was 0.850 ± 0.037. ANB angle had the greatest feature importance at 0.3519. The AI model created in this study accurately classified maxillofacial morphology, but it can be further improved with more learning data input.

A Correlation Analysis between Arch Width and Molar Inclination Using Cone-Beam Computed Tomography Transverse Measurements: A Cross-Sectional Study

A new era in 3-dimensional analysis has begun with the use of cone-beam computed tomography (CBCT) in orthodontics, which promises to provide a more thorough understanding of the craniofacial skeletal architecture. This study aimed to investigate the correlation between the transverse basal arches discrepancy and dental compensation by utilizing CBCT width analysis. An observational study was conducted to retrospectively review 88 CBCT scans of patients presented to dental clinics from 2014 to 2020 obtained from the Planmeca Romexis x-ray system at three centers. Dental compensation data across normal and narrow maxillae were analyzed and a Pearson correlation was used to find the relationship between molar inclination and width difference. Significant maxillary molar compensation differences were observed between the normal maxilla and narrow maxilla group, where the amount of dental compensation (164.73 ± 10.15) was higher in the narrow maxilla group. A significant negative correlation (r = -0.37) was observed between width difference and maxillary molar inclination. Maxillary molars were tipped buccally to compensate for the reduced maxillary arch width. These findings are important to determine the amount of needed maxillary expansion taking into account the buccal inclination while treating cases.

Stability of vertical dimension following total arch intrusion

BACKGROUND

The purpose of this study is to evaluate stability of vertical dimension following total arch intrusion using miniscrews by measuring the change during treatment and relapse amount after more than one year of retention.

METHODS

Thirty patients (6 men, 24 women) were included in this study. Lateral cephalographs were taken with conventional radiography at the start of treatment (T0), after treatment (T1), and at least one year after treatment (T2). The evaluation was performed by measuring changes of selected parameters during treatment and the extent of relapse after more than one year.

RESULTS

During total arch intrusion treatment (T1-T0), anterior and posterior teeth intruded significantly. The mean vertical distance between the maxillary posterior teeth and palatal plane was reduced by 2.30 mm (P < 0.001). The mean vertical distance between the maxillary anterior teeth and palatal plane was reduced by 2.04 mm (P < 0.001). The anterior facial height was also reduced by 2.70 mm (P < 0.001). During retention period (T2-T1), the vertical distance between the maxillary anterior teeth and the palatal plane significantly increased by 0.92 mm (P < 0.001). The anterior facial height increased by 0.81 mm (P < 0.01).

CONCLUSIONS

Anterior facial height significantly decreases after treatment. During retention period, relapse of AFH and maxillary anterior teeth observed. There was no correlation between initial amount of AFH, mandibular plane angle, or SNPog and posttreatment AFH relapse. However, there was a significant correlation between the amount of intrusion of anterior and posterior teeth achieved by the treatment and the extent of relapse.

Malocclusions and oral dysfunctions: A comprehensive epidemiological study on 359 schoolchildren in France

OBJECTIVES

The purpose was to conduct a comprehensive study of malocclusions and oral dysfunctions on 11-year-old children and to study the risk factors associated with malocclusions.

MATERIAL AND METHODS

A cross-sectional descriptive epidemiological survey was conducted among 359 children in France. A clinical examination was conducted, and orthodontic and oral functional data were collected. In addition, the need for orthodontic treatment was evaluated using the criteria defined by of the French National Authority for Health (HAS). Finally, a univariate and multivariate analysis was performed to assess the risks associated with malocclusions.

RESULTS

Most children (88%) exhibited a malocclusion, regardless of gender (p = .912). The examination of oral functions identified a large number of swallowing (87%) and respiration (42.7%) disorders. The presence of malocclusion was statistically linked to the low position of the tongue at rest (p < .001), abnormal swallowing (p = .03), and improper mouth breathing (p = .001). After a multivariate analysis, the type of respiration (odds ratio [OR] = 3.2 [1.4-7.3]) and the position of tongue at rest (OR = 3.43 [1.7-7.1]) were the two most prominent factors in the prediction of emerging malocclusion.

CONCLUSION

This epidemiological survey reveals a high prevalence of dental malocclusions and functional disorders. Oral respiration and the low position of the tongue at rest are the most important factors in the prediction of a malocclusion.

Innovative Technique for Correction of Open Bite - A Case Report

Anterior open bite is defined as a condition in which upper incisor crowns fail to overlap the incisal third of the lower incisor crowns when the mandible is brought into full occlusion. The diagnosis, treatment, and successful retention of treated open-bite malocclusion continue to be a constant subject of discussion and study, contributing to the frustrations of clinicians. Various modalities have been used for the correction of open bite for the different age groups. In adult cases, an open bite can be corrected either by anterior extrusion or posterior intrusion, or a combination of both. Kim had described a method of using multiloop edgewise archwire for posterior intrusion. Here is a case report in which an innovative method is described which is a modification of Kim's method which is simpler, less time-consuming to place, hygienic, and they do not irritate the soft tissue. The bite closing mechanism and the treatment results are similar to Kim's method.

Anterior Mandibular Displacement in Growing Rats—A Systematic Review

Simple Summary

Mandibular deficiency is a very common orthodontic problem. Many different types of appliances have been utilized to correct such malocclusions. Most are appliances that alter the function of the mandible resulting in a more forward positioning of the lower jaw. Many researchers state that such an alteration results in a different rate of mandibular growth, due to condyle endochondral ossification, thus correcting the orthodontic anomaly. Their effect though remains controversial. The aim of the present study was to investigate the effect of such functional appliances in the mandible of growing rats by reviewing the existing literature up to March of 2022. Most of them stated that true condylar growth is observed, although there are many limitations due to the nature of such experiments.

Abstract

Skeletal Class II malocclusion is the most common skeletal anomaly in orthodontics. Growth in the body of the deficient mandible is induced by periosteal apposition and endochondral ossification in the condyle. Functional appliances have been used in the correction of Class II malocclusions by inducing mandibular growth. Despite their utilization though, their effect still remains controversial. The aim of the present study is to review the existing literature regarding the effects of mandibular protrusion in mandibular growth of growing rats. A protocol was followed according to the guidelines of the Cohrane Handbook for Systematic Reviews. Databases were searched using a specific algorithm. From the ten studies finally analyzed, we conclude that the use of a functional appliance in growing rats induces cell proliferation and bone formation in their condyles, resulting in mandibular growth.

A comparative assessment of the dentoskeletal effects of clear aligners vs miniplate-supported posterior intrusion with fixed appliances in adult patients with anterior open bite. A multicenter, retrospective cohort study

INTRODUCTION

This study aimed to retrospectively evaluate the dentoskeletal effects of clear aligners (Invisalign) vs miniplate-supported posterior intrusion (MSPI) and identify factors associated with posttreatment overbite in adults with anterior open bite.

METHODS

Twenty-nine patients treated with Invisalign and 24 with MSPI combined with full-fixed orthodontic appliances were included from 5 orthodontic practices. Pretreatment and posttreatment lateral cephalometric measurements were included as outcomes. Comparisons across groups and identification of final overbite predictors were assessed with regression modeling and machine learning techniques.

RESULTS

MSPI induced significantly greater maxillary molar intrusion (1.5 mm; 95% confidence interval [CI], 0.83-2.17; P <0.001), with subsequent reduction of anterior face height (ANS-Me) (-2.77 mm; 95% CI, -3.64 to -1.91; P <0.001), Mp-SN° (-1.95°; 95% CI, -2.77 to -1.12; P <0.001), and ANB° (-1.69°; 95% CI, -2.44 to -0.94; P <0.001) compared with Invisalign. MSPI resulted in a significantly larger increase in SNB° (0.94°; 95% CI, 0.23-1.65; P = 0.01) and point-Pog projection (2.45 mm; 95% CI, 1.12-3.77; P = 0.001). Compared with MSPI, Invisalign had a significantly greater increase in the distance of maxillary (1.05 mm; 95% CI, 0.38-1.72; P = 0.003) and mandibular (0.9 mm; 95% CI, 0.19-1.60; P = 0.01) incisal edges relative to their apical bases, with borderline greater lingual tipping of only the maxillary incisors (2.82°; 95% CI, -0.44 to 6.09; P = 0.09). Appliance type and initial overbite were significant final overbite predictors across all models. However, this difference was only evident in male patients (males [1.65; 95% CI, 0.99-2.32; P <0.001]; female [-0.04; 95% CI, -0.52 to 0.44; P = 0.87]).

CONCLUSIONS

Both appliances effectively improve overbite. MSPI applied the correction via molar intrusion and counterclockwise mandibular autorotation, whereas Invisalign via maxillary and mandibular incisor extrusion.

Assessment of chin morphology in different skeletal dysplasia – A cross-sectional study

Objective:

The objective of the study is to evaluate the morphology of the symphyseal region of adult skeletal Class II and Class III malocclusion as compared with Skeletal Class I subjects.

Materials and Methods:

The symphyseal width and height were evaluated using data from 80 lateral cephalograms of the age range of 18 years to 25 years. Average growing Skeletal Class II (n = 30) and Class III (n = 20) subjects were used as a comparison group. Average growing normal occlusion samples (n = 30) were used as controls.

Results:

Alveolar height was similar in all groups. The width of the symphyseal region including basal width, the width of the cervical region of the lower central incisor at the cementoenamel junction, and symphysis width were found to be similar in all groups. There is no significant difference in gonial angle in both Class II and III groups as compared to control. Articular angle showed no significant difference. Mandibular incisor dentoalveolar height (L1-AH) was found to be significantly higher in the Class II group (P < 0.05).

Conclusions:

There are no definite morphological differences in the symphyseal region between average grower Class I, Class II, and Class III skeletal malocclusions except mandibular incisor dentoalveolar height (L1-AH) and incisor mandibular plane angle which is higher whereas ramus length and body length which is lesser in Class II group as compared with controls. Width of the cervical region of the lower central incisor at the cementoenamel junction (Id-Id’) and incisor mandibular plane angle was lower than control in Class III subjects.

Sagittal and Vertical Growth of the Maxillo-Mandibular Complex in Untreated Children: A Longitudinal Study on Lateral Cephalograms Derived from Cone Beam Computed Tomography

The aim of this longitudinal study was to evaluate the sagittal and vertical growth of the maxillo–mandibular complex in untreated children using orthogonal lateral cephalograms compressed from cone beam computed tomography (CBCT). Two sets of scans, on 12 males (mean 8.75 years at T1, and 11.52 years at T2) and 18 females (mean 9.09 years at T1, and 10.80 years at T2), were analyzed using Dolphin 3D imaging. The displacements of the landmarks and rotations of both jaws relative to the cranial base were measured using the cranial base, and the maxillary and mandibular core lines. From T1 to T2, relative to the cranial base, the nasion, orbitale, A-point, and B-point moved anteriorly and inferiorly. The porion moved posteriorly and inferiorly. The ANB and mandibular plane angle decreased. All but one subject had forward rotation in reference to the cranial base. The maxillary and mandibular superimpositions showed no sagittal change on the A-point and B-point. The U6 and U1 erupted at 0.94 and 1.01 mm/year (males) and 0.82 and 0.95 mm/year (females), respectively. The L6 and L1 erupted at 0.66 and 0.88 mm/year (males), and at 0.41 mm/year for both the L6 and the L1 (females), respectively.

Three-dimensional volumetric evaluation of dental pulp cavity/tooth ratio in anterior open bite malocclusion using cone beam computed tomography

OBJECTIVES

To assess and compare pulp cavity/tooth volume ratio of maxillary permanent teeth between patients exhibiting anterior open bite malocclusion and those exhibiting anterior normal overbite using cone beam computed tomography (CBCT).

MATERIALS AND METHODS

3D dental images from 44 patients aged between 15 and 29 years were analyzed. The DICOM files of all dental images were imported into an image processing software for calculating pulp cavity volume and tooth volume. Differences of pulp cavity volume, tooth volume, and pulp cavity/tooth volume ratio of each tooth type from both types of occlusions were analyzed using the independent t test. The intra-class correlation coefficient was used to evaluate intra-examiner reliability.

RESULTS

The means of pulp cavity/tooth volume ratio in anterior open bite group were significantly greater than those in anterior normal overbite group (central incisor p = 0.001; lateral incisor p = 0.00025 and canine p = 0.004). The means of root canal/root volume ratio in anterior open bite group were significantly greater than anterior normal overbite group (central incisor p = 0.00001; lateral incisor p = 0.00007; and canine p = 0.001), whereas there were no significant differences of the means of pulp chamber/crown volume was observed.

CONCLUSION

Anterior open bite malocclusion might lead to an increase of the pulp cavity volume and decrease of the tooth volume due to occlusal hypofunction.

CLINICAL RELEVANCE

Orthodontic force should be carefully determined in anterior open bite patient due to the greater root canal volume and lesser root volume.

Three-dimensional computed tomographic assessment of mandibular muscles in growing subjects with different vertical facial patterns

Aim

The present study was undertaken to assess the relationship between the mandibular muscles and dentofacial skeletal morphology in children with different underlying vertical facial patterns, using three-dimensional computed tomography (3D-CT).

Method

Thirty children (mean age 12.24 ± 1.57 years) underwent cranial CT examination for diagnostic purposes. 3D-CT images were reconstructed for the evaluation of the cross-sectional size, volume, and spatial orientation of the masseter and medial pterygoid muscles. These muscle parameters were also assessed in relation to the vertical facial pattern, gender and skeleto-dental form.

Results

Significant differences were found in muscular angulation for subjects with different underlying patterns. Greater masseter volumes were associated with increased facial width. Greater intermolar widths were found in brachyfacial subjects, with less acute muscular angulations in relation to horizontal reference lines, compared with dolichofacial subjects. This was also more obvious in the maxillary arch.

Conclusion

Clinicians should note the likely differences in masseter and medial pterygoid orientation and volume in subjects with different underlying vertical facial patterns and that these differences may, in turn, be related to both facial skeletal width and naturally-occurring transverse dental arch dimensions.

Class ii treatment effects with fixed functional appliances: jasper jumper vs. forsus fatigue resistant device

OBJECTIVE

This study aimed to compare cephalometric changes of Class II malocclusion patients treated with Jasper Jumper and Forsus, associated with fixed appliances.

METHODS

The sample consisted of 62 individuals divided into 3 groups: group 1 included 22 subjects with a mean initial age of 12.39 years, treated with Jasper Jumper associated with fixed appliances for a mean period of 2.43 years; group 2 included 19 subjects with a mean initial age of 12.43 years, treated with Forsus associated with fixed appliances for a mean period of 3.54 years; and group 3 included 22 Class II malocclusion untreated subjects at a mean age of 12.14 years, followed for a mean period of 1.78 years. Intergroup comparison was performed with one-way ANOVA, followed by Tukey test.

RESULTS

Both treated groups had similar dentoskeletal changes: restrictive effect on the maxilla; clockwise rotation of the occlusal plane; mild increase in lower anterior facial height; limitation on the vertical development of the maxillary molars; labial tipping and intrusion of the mandibular incisors; extrusion of mandibular molars; improvements of the maxillomandibular relationship, overjet, overbite, molar relationship; and retrusion of the upper lip. The mandibular incisors exhibited greater protrusion in group 1 compared to the other groups. In addition, group 2 presented mild protrusion of the lower lip, and groups 1 and 3 showed mild retrusion.

CONCLUSION

The Jasper Jumper and Forsus appliances were effective and showed similar changes in the treatment of Class II malocclusion.

Are chin and symphysis morphology facial type-dependent? A computed tomography-based study

INTRODUCTION

The chin is a major determinant of the facial profile; hence, it plays a major role in orthodontics and orthognathic surgery. It is thus essential to follow and better understand its expression in different facial types. The major objectives of the current study were to characterize morphometrically the chin and symphysis and reveal their association with different facial types.

METHODS

Computed tomography scans of the head and neck of 311 adults (163 males, 148 females; age range, 18-95 years) were classified into 3 facial types: short, average, and long. Height, width, projection, inclination, thickness, and area were measured on the chin and symphysis.

RESULTS

The majority of the population (70%) manifested an average facial type; the other 30% were almost equally distributed between short and long facial types. The long facial type was more common among females and the short facial type among males. Chin projection, area, and size were significantly greater in short-faced patients. Chin width in males was similar for all facial types, whereas, in females, chin width was the widest in the short facial type and the narrowest in the long facial type. Symphysis height was significantly greater in long-faced patients in both sexes. The mandibular incisors' inclination relative to the mandibular plane was not significantly associated with the chin or symphysis morphology.

CONCLUSIONS

Chin and symphysis morphology is facial type-dependent. Orthodontists and maxillofacial surgeons should be aware of the complex relationship between facial types and chin/symphysis size and shape when planning treatment.

Cephalometric evaluation of intrusion of maxillary posterior teeth by miniscrews in the treatment of open bite

INTRODUCTION

The objective of this research was to investigate the effectiveness of orthodontic miniscrews for skeletal anchorage during anterior open bite treatment using cephalometric radiographs.

METHODS

This study sample included 20 patients (mean age, 14.71; standard deviation, 1.77) with an anterior open bite. A total of 250 g of force was applied using elastic chains with anchorage from palatal miniscrew to an occlusal splint covering the posterior maxillary teeth. Cephalograms were obtained at the beginning of the treatment when the appliance was first applied and at the 8-month visit when treatment was completed. Paired t tests were used to identify statistically significant differences between initial and final measurements of skeletal and dental parameters.

RESULTS

A decrease of 2.72 ± 1.90° in the SN-GoGn angle and 3.63 ± 1.87 mm in the anterior height (N-Me) parameter in the cephalometric evaluations indicated a significant improvement of vertically increased facial dimensions, with the intrusion of the maxillary posterior teeth (P <0.05). Anterior rotation of the mandible was determined by a 1.76 ± 1.09° increase in the SNB angle and a 1.86 ± 0.90° decrease in the ANB angle (P <0.05). Reductions in the open bite amount by 5.8 ± 0.90 mm, Mx6-SN by 4.00 ± 1.01 mm, and Mx6-PP by 4.01 ± 1.00 mm were indicative of significant intrusion in the maxillary posterior teeth (P <0.05).

CONCLUSIONS

The present study confirmed that palatal miniscrew and maxillary occlusal splint caused intrusion of the maxillary posterior teeth, a decrease in the anterior open bite, and mandibular advancement, with anterior rotation after the maxillary posterior intrusion. We concluded that the treatment method in our study was appropriate for patients with Class I and mild Class II malocclusions and open bite anomalies.

Vertical segmental anterior mandibular distraction to aid closure of a severe anterior open bite associated with an accentuated reverse curve of Spee

Background:

The correction of severe anterior open bite is technically challenging, often requiring the use of complex orthodontic mechanics and/or orthognathic surgery and has a relatively high risk of relapse. A marked reverse curve of Spee in the lower arch presents additional challenges when correcting a severe anterior open bite.

Methods and Materials:

A 22.2-year-old Caucasian man presented with concerns relating to poor anterior occlusion associated with a 1.3-cm anterior open bite. There was an accentuated reverse curve of Spee to the lower arch, an increased maxillary-mandibular plane angle and increased lower face height. Multidisciplinary treatment involving the use of segmental anterior mandibular distraction to level the curve of Spee before undertaking a Le Fort I posterior maxillary impaction is described in this case report.

Results:

Long-term post-treatment records showed stable anterior open bite correction.

Conclusions:

This case report illustrates the successful use of segmental anterior mandibular vertical distraction followed by conventional Le Fort I posterior impaction surgery to correct a severe anterior open bite associated with an accentuated reverse curve of Spee and high maxillary-mandibular plane angle.

Influence of Facial Morphology on Masticatory Function and Quality of Life in Elders Using Mandibular Overdentures: 3-Year Results

Background: Facial types may interfere in the oral health-related quality of life (OHRQoL) and masticatory performance of implant-retained mandibular overdenture (IMO) wearers.

Purpose: Investigate the medium-term changes in the masticatory function (MF) and OHRQoL parameters of IMO users, as a function of facial pattern, anteroposterior skeletal discrepancy, and sex.

Methods: Forty IMO users, most of them Caucasian (90%) with average age of 69.17 years were classified according to their facial pattern and antero-posterior discrepancy prior to rehabilitation. MF was evaluated by the multiple sieves method to determine the average particle size (X50), heterogeneity (B) and masticatory efficiency (ME, calculated as the percentage of material retained in the 5.6 and 2.8 mm sieves), using Masticatory performance (MP) and swallowing threshold (ST) tests. OHRQoL was measured by applying the dental impact on daily life (DIDL) questionnaire. The data were analyzed by Wilcoxon-paired tests to analyze changes in MF parameters over time, and mixed-effect multilevel regression models were employed to verify differences between groups.

Results: Significant changes were still observed in the 3rd year for the ST test with improvements in B for Mesofacial and in time for Dolichofacial individuals, while ME_2.8 deteriorated for Brachyfacial participants. B values of Class I and male individuals improved and brachyfacial individuals still presented worse homogenization (B) than Mesofacial participants in both masticatory tests. Class II and III participants still showed improvements in ME_5.6 and time compared to Class I despite increases in X50. Class II individuals needed less cycles than Class I in the 3rd year. Brachyfacial participants scored lower in the Appearance domain than Mesofacial ones in the 3rd year. Dolichofacial participants and Class III patients scored lower in the Oral Comfort domain than Mesofacial and Class I, respectively. In addition, age influenced the Pain, Oral Comfort and General Performance domains in the 3rd year.

Conclusions: Differences in facial morphology continue to influence the MF and OHRQoL outcomes in the 3rd year, and age influenced some OHRQoL domains. Brachyfacial individuals continue to benefit least from rehabilitation with IMO according to masticatory parameters.

Changes in mandibular shape after early treatment in subjects with open bite: a geometric morphometric analysis

OBJECTIVES

To evaluate the mandibular modifications in anterior open bite (OB) growing subjects treated with Rapid Maxillary Expansion and bite block (RME/BB) or Quad Helix with crib (QH/C) when compared with a Control Group (CG) by using Geometric Morphometric Method (GMM) and conventional cephalometric.

MATERIALS

The OB group comprised 34 subjects (26 girls, 8 boys) with dentoskeletal OB and a mean age of 8.0 ± 1.0 years. OB group was divided in two subgroups: RME/BB group comprised 17 subjects (13 girls, 4 boys), while QH/C group included 17 subjects (13 girls, 4 boys). The two subgroups were compared with a CG of 17 subjects (13 girls, 4 boys) matched for sex, age, vertical pattern, and observation periods. Two consecutives lateral cephalograms were available: the first one was taken before treatment (T1), and the second one was acquired at a follow-up observation at least 4 years after the completion of treatment (T2). Landmarks and semilandmarks were digitized on lateral cephalograms and GMM was applied. Procrustes analysis and principal component analysis were performed. Analysis of variance (ANOVA) with Tukey post hoc tests was used to compare the T2-T1 cephalometric changes between the RME/BB, QH/C, and CG.

RESULTS

In the long term, RME/BB showed a significantly greater decrease of the Condylar axis to mandibular plane angle when compared to CG and QH/C. GMM showed an increased in height of the mandibular ramus in RME/BB group with tendency to counterclockwise rotation of the mandible when compared with QH/C and CG groups.

CONCLUSIONS

RME/BB subjects showed significant changes in the shape of the mandibular ramus with a counterclockwise rotation tendency when compared with QH/C and CG subjects.

Treatment Effects of the Herbst Appliance in Class II Malocclusion Patients after the Growth Peak

OBJECTIVE

 The aim of this study was to evaluate dentoskeletal changes in the treatment of Class II malocclusion with the Herbst Cantilever Bite Jumper (CBJ) appliance, associated with multibracket appliances after the growth peak, at pretreatment.

MATERIALS AND METHODS

 A sample of 37 individuals was divided into two groups: the experimental group comprised 16 patients treated consecutively for a mean period of 2.52 years with the Herbst CBJ appliance associated with multibracket appliances. A total of 21 subjects (10 males and 11 females) with Class II malocclusion and mean age at T1 of 16.08 years were followed for a mean period of 2.12 years composed the control group. Comparisons between the two groups were performed using initial and final lateral cephalograms. Comparisons between experimental and control groups at pretreatment and of the treatment changes were performed by Mann-Whitney or independent t-tests.

RESULTS

 Experimental group exhibited a significantly greater labial inclination of the mandibular incisors in comparison to the control group. Additionally, significantly greater corrections in overbite, overjet, and molar relationship were observed in the experimental than in the control groups.

CONCLUSION

 The effects of the Herbst CBJ appliance, associated with fixed appliances after the growth peak in Class II malocclusion treatment are correction in molar relationship toward a Class I relationship, decrease of the overjet, decrease of the overbite, and mandibular incisors labial inclination.

Variation in Chin and Mandibular Symphysis Size and Shape in Males and Females: A CT-Based Study

The chin is a unique anatomical landmark of modern humans. Its size and shape play an important role from the esthetic perspective. However, disagreement exists in the dental and anthropological literature regarding the sex differences in chin and symphysis morphometrics. The "sexual selection" theory is presented as a possible reason for chin formation in our species; however, many other contradictory theories also exist. This study's aims were therefore to determine how chin and symphysis size and shape vary with sex, and to discuss "sexual selection" theory as a reason for its formation. Head and neck computed tomography (CT) scans of 419 adults were utilized to measure chin and symphysis sizes and shapes. The chin and symphysis measures were compared between the sexes using an independent-samples t-test, a Mann-Whitney test, and the F-statistic. The chin width was significantly greater in males than in females (p < 0.001), whereas the chin height, area, and size index were significantly greater in females (p < 0.001). Symphysis measures did not differ significantly between the sexes. Size accounted for 2-14% of the chin variance and between 24-33% of the symphysis variance. Overall, the chin was found to be a more heterogeneous anatomical structure than the symphysis, as well as more sexually dimorphic.

Effects of Class II division 1 malocclusion treatment with three types of fixed functional appliances

Objective:

This study aimed at comparing the dentoskeletal changes in patients with Class II division 1 malocclusion, treated with three types of fixed functional appliances.

Methods:

A sample comprising 95 patients with the same malocclusion, retrospectively selected, and divided into four groups, was used: G1 consisted of 25 patients (mean age 12.77 ± 1.24 years) treated with Jasper Jumper appliance; G2, with 25 patients (mean age 12.58 ± 1.65 years) treated with the Herbst appliance; G3, with 23 patients (mean age 12.37 ± 1.72 years) treated with the Mandibular Protraction Appliance (MPA); and a Control Group (CG) comprised of 22 untreated subjects (mean age 12.66 ± 1.12 years). Intergroup comparison was performed with ANOVA, followed by Tukey test.

Results:

The Jasper Jumper and the Herbst group showed significantly greater maxillary anterior displacement restriction. The Jasper Jumper demonstrated significantly greater increase in the mandibular plane angle, as compared to the control group. The MPA group demonstrated significantly greater palatal inclination of the maxillary incisors. Vertical development of the maxillary molars was significantly greater in the Herbst group.

Conclusions:

Despite some intergroup differences in the amount of dentoskeletal changes, the appliances were effective in correcting the main features of Class II malocclusions.

Evaluation of condyle-fossa relationships in adolescents with various skeletal patterns using cone-beam computed tomography

OBJECTIVES

To evaluate the condyle-fossa relationship in adolescents with various skeletal patterns using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

CBCT images obtained in 120 adolescent patients were used for this study. The patients were divided into 3 groups according to 3 criteria: (1) age (early, middle, and late adolescence); (2) facial height ratio or Jarabak quotient (hyperdivergent, normodivergent, and hypodivergent); and (3) ANB classification (Class I, Class II, and Class III). Temporomandibular joint space (TMJS: AS, anterior space; SS, superior space; PS, posterior space; MS, medial space; LS, lateral space), width and depth of the condyle (MLT, mediolateral thickness; APT, anteroposterior thickness), articular slope (ArS) and vertical height of the fossa (VHF) were measured and compared using CBCT.

RESULTS

Differences in condyle-fossa relationships were not significantly different between male and female adolescents, but were significantly different (P < .05) between left and right sides. The mean values showed no statistical differences according to age and skeletal pattern. Most measurements in the sagittal view showed that SS was the greatest, and the mean ratio of AS to SS to PS was 1.00 to 1.27 to 1.19, respectively. The mean values of coronal MS and LS were not significantly different.

CONCLUSIONS

There were almost no statistical differences in the TMJS in adolescents across various factors except between left and right sides.

Application of the foramina of the trigeminal nerve as landmarks for analysis of craniofacial morphology

Objective

The objective of this study was to develop new parameters based on the foramina of the trigeminal nerve and to compare them with the conventional cephalometric parameters in different facial skeletal types.

Methods

Cone-beam computed tomography (CBCT) scans and cephalograms from 147 adult patients (57 males and 90 females; mean age, 26.1 years) were categorized as Class I (1° < ANB < 3°), Class II (ANB > 5°), and Class III (ANB < −1°). Seven foramina in the craniofacial area—foramen rotundum (Rot), foramen ovale (Ov), infraorbital foramen, greater palatine foramen, incisive foramen (IF), mandibular foramen (MDF), and mental foramen (MTF)—were identified in the CBCT images. Various linear, angular, and ratio parameters were compared between the groups by using the foramina, and the relationship between the new parameters and the conventional cephalometric parameters was assessed.

Results

The distances between the foramina in the cranial base did not differ among the three groups. However, the Rot-IF length was shorter in female Class III patients, while the Ov-MTF length, MDF-MTF length, and Ov-MDF length were shorter in Class II patients than in Class III patients of both sexes. The MDF-MTF/FH plane angle was larger in Class II patients than in Class III patients of both sexes. Most parameters showed moderate to high correlations, but the Ov-MDF-MTF angle showed a relatively low correlation with the gonial angle.

Conclusions

The foramina of the trigeminal nerve can be used to supplement assessments based on the conventional skeletal landmarks on CBCT images.

Relationship between the maxillofacial skeletal pattern and the morphology of the mandibular symphysis: Structural equation modeling

Objective

The purpose of this study was to investigate the relationship between the facial skeletal patterns and the shape of the mandibular symphysis in adults with malocclusion by using a structural equation model (SEM).

Methods

Ninety adults who had malocclusion and had records of facial skeletal measurements performed using cone-beam computed tomography were selected for this study. The skeletal measurements were classified into three groups (vertical, anteroposterior, and transverse). Cross-sectional images of the mandibular symphysis were analyzed using generalized Procrustes and principal component (PC) analyses. A SEM was constructed after the factors were extracted via factor analysis.

Results

Two factors were extracted from the transverse, vertical, and anteroposterior skeletal measurements. Latent variables were extracted for each factor. PC1, PC2, and PC3 were selected to analyze the variations of the mandibular symphyseal shape. The SEM was constructed using the skeletal variables, PCs, and latent variables. The SEM showed that the vertical latent variable exerted the most influence on the mandibular symphyseal shape.

Conclusions

The relationship between the skeletal pattern and the mandibular symphysis was analyzed using a SEM, which showed that the vertical facial skeletal pattern had the highest effect on the shape of the mandibular symphysis.

[Surgery First : prediction for skeletal objectives through structural analysis. Comparison of Sassouni and Delaire analysis]

INTRODUCTION

The purpose of this study was to compare two structural cephalometric analysis (Delaire and Sassouni) as surgical decision tools. These two analyses do not include dental compensation for skeletal discrepancies and have been proven reliable especially for the Sendai surgery first protocol developed by Sugawara.

MATERIAL AND METHOD

The two analysis were performed on 20 surgical cases and the proposed skeletal modifications were compared in order to measure the differences and see if those differences varied according to the facial type. For 10 cases the Virtual Surgical Planning (VSP) images obtained from Dolphin 11.95 Premium software (based on the presurgical CBCT and facial photographs) allowed a comparison of the two analyses as surgical decision indicators and to the realised surgical procedure. The VSP photographs obtained were graded by two panels: one professional and the other one non professional.

RESULTS

Sassouni's analysis favored more forward movements for the maxilla (ENA +5,45) as well as more vertical modifications (Me 1,595). The facial type did not appear to have a significant effect. The quality of Dolphin VSP prediction was judged rather reliable above average (3.7/6) by the panels. The VSP photographs obtained from the two analyses were presented to the panels as well as the VSP obtained from the actual surgery. The three facial outcomes: Sassouni, Delaire and "Surgery Realised" called Dolphin showed some potentially interesting differences. The small size of the sample did not show any significant findings (t test) but a special analysis revealed a valid difference between the three outcomes. The most aesthetic being Dolphin (surgery realised) 17.4 then Sassouni 16.6 (diff 0.8) and finally Delaire 14 (diff 2.6).

CONCLUSIONS

The two structural analysis Delaire and Sassouni did not give the same surgical objectives. Sassouni favored more forward movements for the maxilla as well as more vertical modifications. The Dolphin software appeared to be the quite reliable software to predict the facial outcomes of the surgery. The VSP photographs obtained using Sassouni's analysis were more balanced than when the Delaire analysis was followed (16.4/14 = +2.6). The VSP based on the actual surgery was judged to be even more aesthetic. This shows that beyond a cephalometric analysis the facial aesthetic details and the functional analysis are very important during the phase of surgical planning.

Forceful mastication activates osteocytes and builds a stout jawbone

Bone undergoes a constant reconstruction process of resorption and formation called bone remodeling, so that it can endure mechanical loading. During food ingestion, masticatory muscles generate the required masticatory force. The magnitude of applied masticatory force has long been believed to be closely correlated with the shape of the jawbone. However, both the mechanism underlying this correlation and evidence of causation remain largely to be determined. Here, we established a novel mouse model of increased mastication in which mice were fed with a hard diet (HD) to elicit greater masticatory force. A novel in silico computer simulation indicated that the masticatory load onto the jawbone leads to the typical bone profile seen in the individuals with strong masticatory force, which was confirmed by in vivo micro-computed tomography (micro-CT) analyses. Mechanistically, increased mastication induced Insulin–like growth factor (IGF)-1 and suppressed sclerostin in osteocytes. IGF-1 enhanced osteoblastogenesis of the cells derived from tendon. Together, these findings indicate that the osteocytes balance the cytokine expression upon the mechanical loading of increased mastication, in order to enhance bone formation. This bone formation leads to morphological change in the jawbone, so that the bone adapts to the mechanical environment to which it is exposed.

Analysis of the relationship between the morphology of the palate and facial skeletal patterns in Class III malocclusion using structural equation modelling

INTRODUCTION

The present study investigated the relationship between facial skeletal patterns and morphology of the palate in adult patients with Class III malocclusion using structural equation modelling (SEM).

SETTING AND SAMPLE POPULATION

One hundred cone beam computed tomography images of Class III adults were evaluated for skeletal measurements.

MATERIALS AND METHODS

The skeletal measurements were classified into the vertical, anteroposterior and transverse group based on factor analysis. 3D scanning model of the maxilla was analysed by Generalized procrustes analysis (GPA) and principal component analysis (PCA). Structural equation modelling was used to analyse relationship among the skeletal and morphometric factors.

RESULTS

According to the factor analysis, latent variables were extracted by each skeletal variable. First principal component (PC1) and PC2 of palatal morphology were used to analyse relationship with skeletal variables. As results of the structural equation model, the transverse latent variable had the most influence on PC1, followed by vertical and anteroposterior variables. This result means that as the facial width increases, the palate becomes narrower, deeper and longer.

CONCLUSIONS

The relationship between the skeletal pattern with Class III malocclusion and palatal morphology was analysed through SEM. The transverse facial skeletal pattern showed the highest correlation with PC1 of palatal morphology.

Morphometric covariation between palatal shape and skeletal pattern in children and adolescents: a cross-sectional study

Objective

To assess shape covariation of the palate and craniofacial complex (CFC) in children and adolescents.

Methods

Pre-treatment lateral cephalometric radiographs and corresponding maxillary casts of 100 children (8-10 years) and 100 adolescents (15-20 years) were digitized. Exclusion criteria were previous orthodontic treatment, craniofacial syndromes, mouth breathing, finger sucking, crossbite, tooth agenesis, and tooth impaction. Palatal shape was described with 239 surface and curve semilandmarks and craniofacial shape with 10 fixed landmarks and 117 curve semilandmarks. Procrustes superimposition and principal component analysis were applied for evaluation of shape variability. Shape covariation between palate and CFC was assessed with partial least squares analysis.

Results

The first five principal components explained 77 per cent (palate) and 60 per cent (CFC) of total shape variability. The palate varied mainly in height (adolescent group) and width-length (both groups), whereas the CFC varied mainly in the vertical dimension. Significant covariation was found between the craniofacial and palatal components (RV coefficient: 0.27, children; RV: 0.23, adolescents). Variation of the CFC in the vertical and anteroposterior direction was mainly related to variation in the height-width and the width-length ratio of the palate, respectively.

Limitations

The use of lateral cephalometric radiographs eliminated the transverse dimension from the craniofacial shape analysis. The study was cross-sectional, so the observed intergroup differences should be interpreted with caution.

Conclusions

Covariation strength and pattern were similar in children and adolescents. The closer a subject was to the high-angle end of the variability spectrum, the higher and narrower was the palate, and conversely.