Neuromuscular and skeletal adaptations to altered function in the orofacial region

Comparison of muscle response in patients treated with rigid and flexible fixed functional appliances

AIM

The present study was undertaken to evaluate and compare muscle activity after the treatment with rigid and flexible fixed functional appliance.

MATERIAL AND METHOD

The study was conducted on 14 skeletal Class II malocclusion patients in the age group of 13-17 years, divided into two groups comprising 7 patients in each group. Group I was treated with a rigid fixed functional appliance (MPA IV), and Group II was treated with a flexible fixed functional appliance (Churro Jumper). Masseter and anterior temporalis muscle activities were recorded using needle electromyography (EMG) at postural rest, saliva swallowing, and clenching during five intervals (T0 to T4) during fixed functional appliance treatment. Unpaired t-test, Mann-Whitney U, and Wilcoxon sign rank test were applied for statistical analysis, and a P value of <.05 was considered statistically significant.

RESULTS

Group I (MPA IV) showed a significant increase in EMG activity during postural rest position (P = 0.003, P = 0.001), swallowing (P = 0.013, P = 0.005), and clenching (P = 0.001, P = 0.002) in masseter and anterior temporalis muscle, respectively. Group II (Churro jumper) also showed a significant increase in EMG activity during postural rest position (P = 0.000, P = 0.000), swallowing (P = 0.001, P = 0.000), and clenching (P = 0.001, P = 0.000) in masseter and anterior temporalis muscle, respectively.

CONCLUSION

Both rigid (MPA IV) and flexible (Churro Jumper) fixed functional appliances caused a significant increase in EMG activity of masseter and anterior temporalis muscle during postural rest position, swallowing, and clenching in 6 months of the observation period, but the flexible appliance (Churro Jumper) showed more significant increase.

Evaluation of mandibular motion in adolescents with skeletal class II division 1 malocclusion during mandibular advancement using clear functional aligners: a prospective study

BACKGROUND

This study aimed to evaluate the characteristics of mandibular protrusive condylar trajectory in adolescents with skeletal Class II Division 1 malocclusion and the changes of condylar trajectory during mandibular advancement (MA) treatment using clear functional aligners.

METHODS

This prospective study consisted of a cross-sectional study and a longitudinal study. In cross-sectional study, sixty-one adolescents were divided into two groups: Class I (n = 30) and Class II Division 1 (n = 31). The condylar trajectory was measured and compared using the Mann-Whitney U test. The longitudinal study was the MA treatment group using clear functional aligner and consisted of 16 participants from Class II Division 1group. The condylar trajectory was collected at three-time points: pre-treatment (T1), during MA treatment at approximately 3 months (T2, 105.6 days average), and at the end of MA treatment (T3, 237.6 days average). The changes at T1, T2, and T3, as well as the symmetry between the left and right condyles across all groups, were examined using the Wilcoxon paired test.

RESULTS

A greater increase in the anteroposterior displacement and space displacement during protrusive movements was observed in the Class II Division 1 group compared with that in the Class I group, with a large difference being observed in the left and right condylar movements. The condylar anteroposterior displacement and space displacement decreased significantly at T2 and increased significantly at T3; however, no significant difference was observed between T1 and T3. A significant difference was observed between the condylar movement on the left and right sides at T1; however, no significant difference was observed at T2 and T3.

CONCLUSIONS

Adolescents with Class II Division 1 malocclusion had higher protrusive capacity than those with Class I. Moreover, their left and right condylar motion was more asymmetric. The range of condyle motion decreased first and then increased during MA therapy, and the left and right condyle movement became more symmetrical, which may be the adaptive response of neuromuscular function to the changes in jaw position.

Genetic and environmental impact on mandibular growth in mono- and dizygotic twins during adolescence: A retrospective cohort study

INTRODUCTION

This study aimed to discover the genetic and environmental factors that contribute to the mandibular development of untreated monozygotic and dizygotic twins.

MATERIAL AND METHODS

The sample, taken from the Forsyth Moorrees Twin Study, included 52 untreated monozygotic twins (36 male, 16 female) and 46 untreated dizygotic twins (23 male, 23 female). At the ages of 12 and 17, lateral cephalograms were collected and traced to assess total mandibular length, mandibular ramus length, mandibular corpus length, gonial angle, SNB, and bony chin prominence. The genetic and environmental components of variation were assessed using multilevel mixed-effects structural equation modelling.

RESULTS

At 12 years of age, high additive genetic influences were observed for total mandibular length (74%), gonial angle (76%), SNB (41%), and bony chin prominence (64%), whereas strong dominant genetic components were observed for corpus length (72%), and mandibular ramus length was under unique environment influence (54%). At 17 years of age, only total mandibular length (45%), ramus length (53%), gonial angle (76%), and bony chin prominence (68%) were under strong additive genetic control, while the remainder were under strong dominant genetic control.

CONCLUSIONS

Although monozygotic and dizygotic twins share at least a portion of their DNA, additive, dominant, or environmental components were discovered during adolescence. Nonetheless, by the age of 17, the majority of the mandibular traits are under either additive or dominant genetic impact.

Stress distribution of the modified clear twin-block aligner on the temporomandibular joint, alveolar bone and teeth: A finite element analysis

OBJECTIVE

The modified clear twin-block aligner (CTBA) was developed to provide a mandibular advancement appliance for the treatment of mandibular retrognathia. The objective of this study was to analyse the stress distribution changes of CTBA with 45°, 60° and 70° bite blocks.

MATERIAL AND METHODS

A three-dimensional model of the craniomaxillofacial bones and teeth was generated from a spiral computed tomography (CT) scan. The models of the articular disc, capsule, periodontal ligament and CTBA were constructed mathematically. After assigning the appropriate material properties and the boundary condition using ABAQUS software, we simulated the CTBA with different bite blocks to analyse the mechanical effects.

RESULTS

In the temporomandibular joint (TMJ) region, the posterior aspect of the condyle and glenoid fossa experienced tensile stress that was approximately about 22 times greater at 70° than at 45°. The Von Mises stress distribution on the articular disc tended to be uniform. The strain direction of the condyle was backward. In the maxillary bone, the stress on the labial alveolar bone was about 5.83MPa at 70° and greater than that on the lingual side. The resulting displacement of the dentition revealed a tendency for the upper teeth to shift backward and the lower teeth to move forward by 0.46 to 0.49mm. The foregoing stress and displacement rose as the angle of the bite blocks increased.

CONCLUSIONS

CTBA with 70° bite blocks constituted an advantageous biomechanical setting for the treatment of mandibular retrognathia in teenagers and provided a superior therapeutic effect.

Case report on pre-orthodontic trainer in a 9-year-old child with 12 months follow up

BACKGROUND: Pre-fabricated myofunctional appliances for early orthodontic therapy have been designed specifically for the care of children at the time of mixed dentition in growing adolescents with class II division 1 malocclusions. Sophisticated prefabricated removable functional appliances known as pre-orthodontic trainers have been shown to train the orofacial musculature, thus correcting malocclusions. CASE DESCRIPTION: This is a case report of 9-year-old boy diagnosed as Class II division 1 malocclusion with protruded upper anterior teeth, constricted upper arch, space loss in lower arch and Class 2 molar relation on side. Functional treatment approach was decided using pre orthodontic T4K trainer for 12 months. At the end of this phase of treatment, improvements have been evaluated with lateral cephalograms superimposition between T1 and T2. DISCUSSION: Class II orthopaedic treatment along with the use of functional appliances by early interception assist in addressing the concerns with soft tissues, muscles, mouth respiration, and bruxism. The pre orthodontic trainer allowed a good dento-skeletal result as it had a major effect on the masticatory muscles after 12 months application which helped in obtaining a good esthetic outcome for the patient. CONCLUSIONS: The use of prefabricated functional appliance in children can be an advantageous method for early treatment of class II malocclusions with functional patterns as these devices influences masticatory muscle which help in molding the facial tissues and a viable alternative to braces for treating malocclusions in children because it stimulates the development of the dental arches transversely to stop the progression of the malocclusion. Therefore, when a lack of transverse development is discovered at a young age, this appliance is an invaluable tool for enhancing dental arch development, interceptive management of malocclusion, and oral habits.

Heritability of facial soft tissue growth in mono- and dizygotic twins at 12 and 17 years of age: A retrospective cohort study

OBJECTIVE

The purpose of this investigation of untreated monozygotic and dizygotic twins was to identify the genetic and environmental components to the facial soft tissue growth.

SETTINGS AND SAMPLE POPULATION

The sample consisted of 52 untreated monozygotic twins (36 male and 16 female) and 46 untreated dizygotic twins (23 male and 23 female) from the Forsyth Moorrees Twin Study (1959-1975).

MATERIALS AND METHODS

Lateral cephalograms were taken at 12 and 17 years of age and traced to analyse facial convexity, nasolabial angle, upper and lower lip thickness, upper and lower lip profile and nose prominence. The genetic and environmental components of variance were analysed with structural equation modelling for multilevel mixed-effects model.

RESULTS

At 12 years of age, strong additive genetic influence was seen for facial convexity (70%), upper lip profile (66%) and nose prominence (65%), whereas strong dominant genetic components were found for upper lip thickness (56%). Nevertheless, under unique environment influence were nasolabial angle (58%), lower lip profile (51%) and lower lip thickness (64%). At 17 years of age, only upper lip thickness (55%) and nose prominence (84%) were under strong additive genetic control, while the rest of the variables were under strong dominant genetic control. The only exception was lower lip thickness (61%), which is still influenced by the unique environment.

CONCLUSION

Although monozygotic/dizygotic twins share at least part of their genome, at both times either additive, dominant or environmental components were found. Nevertheless, at 17 years of age most of the variables are either under additive or dominant genetic influence.

A Comparative Evaluation of the Dentoskeletal Treatment Effects Using Twin Block Appliance and Myobrace System on Class II Division I Malocclusion

The study aimed to evaluate the dentoskeletal effects of twin block appliance and myobrace system in treating skeletal Class II Division I malocclusions in growing children taking into account the effects of normal growth in an untreated control group. Twenty subjects with Class II Division I malocclusion considered as study group were allocated randomly to two treatment groups of 10 each, consecutively treated with twin block appliances (mean age 10.850 ± 1.37 years) and myobrace system (mean age 10.40 ± 1.89 years). Ten children (mean age 10.60 ± 1.77 years) with untreated Class II Division I malocclusion were considered as a control group to eliminate possible growth effects. At the start of the treatment and end of the observation period of 18–24 months, lateral cephalograms were taken. All the angular and linear parameters measured were subjected to statistical analysis. Twin block group subjects produced more measurable and statistically significant skeletal and dentoalveolar changes at the end of the observation period, demonstrated by correction of full cuspal Class II molar relationship to Class I molar relationship and yielding mandibular growth in increments greater in magnitude than the myobrace system. Meanwhile, the myobrace system-induced favorable dentoalveolar changes by a significant reduction of overjet. The retrognathic profile, however, improved in both the intervention groups as the upper lip protrusion, mentalis strain, and the lower lip curl were eliminated in striking contrast to the untreated control group. The study demonstrates that with appropriate patient selection both myobrace system and twin block appliances can be used in conjunction with the fixed appliance therapy to achieve more stable Class II corrections.

How to cite this article: Johnson JS, Satyaprasad S, Sharath Chandra H, et al. A Comparative Evaluation of the Dentoskeletal Treatment Effects Using Twin Block Appliance and Myobrace System on Class II Division I Malocclusion. Int J Clin Pediatr Dent 2021;14(S-1):S10–S17.

Genetic and environmental components of vertical growth in mono- and dizygotic twins up to 15-18 years of age

OBJECTIVES

To determine the additive genetic and environmental contributions to the vertical growth of craniofacial structures.

MATERIALS AND METHODS

The sample consisted of 64 untreated monozygotic (44 male, 20 female) and 61 untreated dizygotic twins (32 male, 29 female). Lateral cephalograms taken at 15 and 18 years of age were traced to analyze the sella-nasion-nasal line angle (SN-NL), nasal line-mandibular line angle (ML-NL), sella-nasion-mandibular line angle (SN-ML), sella-nasion-sella-gnathion angle (Y-axis), posterior face height/anterior face height (PFH/AFH), and lower anterior face height/anterior face height (LAFH/AFH). The genetic and environmental components of variance were analyzed with structural equation modeling for multilevel mixed effects.

RESULTS

At 15 years of age, strong dominant genetic control was seen for NL-ML (81%), LAFH/AFH (73%), and Y-axis (57%), whereas strong additive genetic components were found for PFH/AFH (78%), SN-NL (58%), and SN-ML (57%). Unique environmental factors accounted for 18-42% of observed variance, with SN-NL being affected the most (42%). At 18 years of age, only LAFH/AFH (86%) was under strong dominant genetic control, whereas the remainder were under additive genetic influence. The sole exception was SN-NL, which changed from additive to unique environmental influence.

CONCLUSIONS

Either additive or dominant genetic components were found at 15 or 18 years of age for most vertical variables. Environmental factors accounted for about 10-40%, with SN-NL being mostly affected.

Treatment of the mandibular shift in an adult woman and the diagnostic value of joint space index: a case report

BACKGROUND

Mandibular deviations are common clinical complaints. The orthodontic or orthognathic treatment of mandibular deviations is tricky because a comprehensive diagnosis, especially a functional one, is difficult to make. A inaccurate diagnosis may lead to a compromised and unstable treatment outcome.

CASE PRESENTATION

This article describes the diagnosis and treatment of a woman with a mandibular deviation and facial skeletal asymmetry. By eliminating the disharmony of the arch form with elastics and bite turbos, her esthetic and functional outcomes improved. Cone-beam CT (CBCT) and Joint Space Index (JSI) analyses served as the diagnostic approaches and outcome evaluation methods before and after treatment.

CONCLUSIONS

A condyle position displacement could be an indication of functional deviation. JSI analysis is a quantitative and convenient choice to compare condyle relative positions.

Stepwise versus single-step mandibular advancement with functional appliance in treating class II patients : A meta-analysis

BACKGROUND

Difference in the functional orthopedic effect between stepwise mandibular advancement (SWA) and single-step mandibular advancement (SSA) in Angle class II patients remains unclarified.

OBJECTIVE

To compare the treatment effects of SWA and SSA on skeletal and dentoalveolar changes in class II patients.

METHODS

Randomized controlled trials (RCTs) and nonrandomized studies that compared differences in skeletal and dentoalveolar effects on class II patients between SWA and SSA were identified in PubMed, Embase, CENTRAL, and Web of Science. The grey literature was also searched. The primary outcomes were the mandibular length, L1-MP, and (ANB). Secondary outcomes included Pog sagittal, SNB, overjet, and mandibular plane angle.

RESULTS

Seven studies, including three RCTs and four cohort studies, were retrieved. Meta-analyses revealed pooled mean differences (95% confidence interval) of 0.79 mm (0.45 to 1.12 mm) for Pog sagittal, 0.53° (0.19 to 0.87°) for SNB, -0.51° (-0.83 to -0.20°) for ANB, -0.17° (-0.72 to 0.39°) for the mandibular plane angle, -0.41 mm (-0.90 to 0.09 mm) for overjet, -1.87° (-3.23 to -0.52°) for L1-MP, and 1.03 mm (0.63 to 1.42 mm) for the mandibular length. Publication bias was not observed, except for Pog sagittal. The quality of evidence for each outcome was judged as low (mandibular length, SNB and overjet) and very low (Pog sagittal, ANB, L1-MP and mandibular plane angle).

CONCLUSIONS

Although the magnitude of differences in clinical practice was limited, SWA might be more appropriate because it produces a greater skeletal change and less dental compensation than SSA. As the level of current evidence is low, more high-quality RCTs are needed.

Improving headgear wear: why force level and direction of traction matter

Background

Empiric data on headgear wear are scarce. The aim was to examine a possible discrepancy between the duration of wearing and force application, and whether such a difference is influenced by force level or direction of traction.

Materials and methods

In this retrospective analysis, 122 consecutive patients were included. All were treated with headgear (three subgroups: high-pull headgear [n = 60], cervical-pull headgear [n = 32], and high-pull headgear in combination with an activator [n = 30]) and were monitored for three successive months using an electronic module. The device recorded chronographically the measured force magnitude and temperature, allowing to differentiate between the duration of headgear wear (recorded body temperature) and actual force application (recorded force).

Results

For all subgroups, the average recorded force application was lower than wear time (mean inactivity during wear: 15.9 ± 22.8 minutes/night). The direction of traction significantly influenced the extent and length of wear time without force application (P &lt; 0.001): patients with cervical-pull headgear were more prone to inactive wear time (27.7 minutes/night) than patients with high-pull headgear (13.7 minutes/night) or with headgear–activator (7.8 minutes/night). The observed inter-individual variability of inactive wear time was considerable (0–134 minutes/night). The mean applied force was highly significantly associated with inactive wear time (correlation coefficient: −0.575; P &lt; 0.001), and force levels below 250 g seem particularly related to episodes of inactivity.

Conclusions

There is a clear incongruity between the duration of headgear wear and the duration of force application. Inactive wear time is influenced by the direction of traction and force level applied. Clinicians should be aware of the likelihood of periods of inactive wear time and researchers should search for options to reduce or even eliminate these periods.

Orofacial muscles activity in children with swallowing dysfunction and removable functional appliances

Swallowing dysfunction is a frequent disorder among children and refers to an altered tongue posture and abnormal tongue movement during swallowing. Removable functional appliance is one of the treatments applied by dentistry to correct this disorder. The aim of this study was to evaluate any differences on orofacial muscles activity in children with swallowing dysfunction with and without removable functional appliances. 68 children were eligible for the study and divided into the orthodontic group (OG) and the no-orthodontic group (NO-OG). Both groups performed a dental occlusion-class evaluation, a swallowing function test and a myoscan analysis in order to measure perioral forces (i.e. tongue extension force, lip pressure, masseter contraction force). Our results showed a significant difference (P=0.02) between OG and NO-OG for the tongue extension force, whereas no significant differences (P>0.05) were found for the other parameters. Our findings suggest that children with swallowing dysfunction and removable functional appliance show orofacial muscles activity within the range of reference values (except for the lip pressure). However, we hypothesize that orthodontic treatment can achieve more effective results with integration of myofunctional therapy.

Are morphologic and topographic alterations of the mandibular fossa after fixed functional treatment detectable on tomograms? Visual classification and morphometric analysis

AIM

The goal was to evaluate if changes in morphology and topography of the mandibular fossa after Functional Mandibular Advancer (FMA) treatment are detectable on tomograms. Furthermore, the suitability of digital tomograms (DT) over magnetic resonance imaging (MRI) for this particular question was investigated.

MATERIALS AND METHODS

In all, 25 patients (14 female, 11 male) with a skeletal class II malocclusion received treatment with a FMA. DTs were available prior to (T1) and after (T2) FMA treatment. A total of 50 temporomandibular joints were investigated. The mandibular fossae were evaluated metrically and visually regarding treatment-induced alterations. A p < 0.05 was set as the level for statistical significance for all tests. Results were compared to the results of a recent MRI study.

RESULTS

Visual inspection of all 50 joints in the DT at T1 and T2 revealed no alterations of the fossa shape in the sagittal plane; 24 patients showed identical morphology of right and left joints. The metrical analysis revealed no significant changes regarding width, depth and ratio thereof between T1 and T2. There also were no bilateral differences. Another 18 different distance measurements between porion, mandibular fossa, articular eminence and pterygoid fossa showed no significant changes. There was no detectable proof of a fossa shift.

CONCLUSIONS

No changes in the sagittal plane, mandibular fossa, the articular tubercle, or a possible fossa shift were found in the DT of class II patients after FMA treatment. DT and MRI measurements and the visual inspection revealed identical findings; thus, DT appears to be a valuable research tool for sagittal analysis of mandibular fossa changes.

Heritability of Facial Skeletal and Dental Characteristics of Monozygotic and Dizygotic Twins Using Cephalometric Analysis and Falconer's Method

The purpose of this study was to investigate the heritability of facial skeletal and dental characteristics of the monozygotic (MZ) and dizygotic (DZ) twins. The samples consisted of Korean MZ and DZ twins (n = 13 pairs/each twin; 7 pairs of males and 6 pairs of females; mean age, 39 years, respectively). The linear, angular, and ratio variables, which could describe the size and shape of the facial horizontal and vertical, dental, mandible and cranial base structure, were measured. The Falconer's method was used to calculate the heritability (h; close to or below 0, low heritability; close to or above 1, high heritability). In the facial horizontal and vertical aspects, the highest h values were shown at SNA (degree, 1.53), SNB (degree, 2.12), SN-Pog (degree, 2.19), SN-palatal plane angle (degree, 1.29), SN-mandibular plane angle (degree, 1.59), N-ANS/ANS-Me (1.66), and ANS-Me/N-Me (1.62). In the dental aspects, although L1-occlusal plane angle (degree, 1.38) and SN-occlusal plane angle (degree, 2.09) showed high h values, most of the dental variables showed low h values. In the mandible and cranial base, lower gonial angle, mandibular body length, and cranial base angle showed high h values (N-Go-Gn [degree], 1.07; Go-Pog [mm], 0.92; N-S-Ba [degree], 1.51). The descending order of the overall mean h values was the facial horizontal (1.10), facial vertical (0.71), mandible (0.59), cranial base (0.37), and dental characteristics (-0.11). The shape of facial skeletal structure and location of the occlusal plane within skeletal framework was more influenced by genetic factors than environmental factors.

Temporomandibular disorders in growing patients after treatment of class II and III malocclusion with orthopaedic appliances: a systematic review

OBJECTIVE

To determine if the use of orthopaedic appliances in growing patients applied to correct Class II and III malocclusion is related to the development of temporomandibular disorders (TMD).

MATERIAL AND METHODS

A systematic review was conducted between 1960 and July 2017, based on electronic databases: PubMed, Cochrane Library, Embase, Medline, Scopus, EBSCOhost, Scielo, Lilacs and Bireme. Controlled clinical trials (CCTs) and randomized controlled trials (RCTs) were identified. The articles were selected and analyzed by two authors independently. The quality of the evidence was determined according to the guidelines of the Cochrane Risk Bias Assessment Tool and the Cochrane Quality Study Guide.

RESULTS

Seven articles were included, four CCTs and three RCTs. The studies were grouped according to malocclusion treatment in (a) class II appliances (n = 4) and (b) class III appliances (n = 3). The quality of evidence was low due to the high risk of bias, independent of the association reported. All studies concluded that the use of orthopaedic appliances would not contribute to the development of TMD.

CONCLUSIONS

The quality of evidence available is insufficient to establish definitive conclusions, since the studies were very heterogeneous and presented a high risk of bias. However, it is suggested that the use of orthopaedic appliances to correct class II and III malocclusion in growing patients would not be considered as a risk factor for the development of TMD. High-quality RCTs are required to draw any definitive conclusions.

Management of Craniofacial Development in the Parry-Romberg Syndrome: Report of Two Patients

Objective

The aim of this article is to describe the orthodontic therapy for Parry-Romberg syndrome. The therapeutic goal is to minimize the wasting effects of progressive atrophy on facial development of a part of the face.

Design

To correct problems affecting craniofacial development of these patients, occurring during puberty, an orthodontic appliance was employed, which helps maintain parallelism of the facial planes, in particular the mandibular plane.

Setting

Orthodontic care was carried out in the Dental Clinic of the Catholic University of the Sacred Heart of Rome.

Intervention

Two patients underwent orthodontic therapy for 6 years. Appliances were checked every month and modified periodically so as to adapt to facial bone growth.

Results

At the end of craniofacial growth, the mandible was almost symmetric and the problem relating to atrophy remained confined to the initial area. Cephalometric analyses demonstrated that the occlusal plane and the mandibular plane maintained a straight orientation in relation to the bizygomatic plane. The ratio between the left and right side of the ramus and condyle, in the mandible, improved.

Conclusions

The use of orthodontic therapy allows patients affected by hemifacial progressive atrophy to present a more harmonic face at the end of puberty when final reconstruction can be planned. These results provide for a limitation of surgical intervention to the sclerodermic area alone.

A genetic heritage; the same yet different: A comparative study in twins

Since the 19th century, and in every field of medicine, monozygotic twins have been studied to assess the involvement of genetic and environmental factors in phenotypic expression. The phenotype/genotype relationship remains the leading problem in contemporary biology. In dentofacial orthopedics, this relationship is of relevance in the three-dimensional approach to the face, in both diagnosis and treatment. The present study of two monozygotic twins presenting skeletal class III malocclusions which were genetic yet different is a clear illustration of the interaction of genotype and epigenetic factors with environmental influences. We will demonstrate that treatment can reduce phenotypic differences.

[Not Available]

James A. McNamara, diplômé de l’Université de Californie de Berkeley, a suivi ses études de dentisterie et d’orthodontie au sein de l’Université de Californie de San Francisco, et a obtenu un doctorat en anatomie à l’Université du Michigan. Il est titulaire actif de la chaire de professeur émérite Thomas M. and Doris Graber dans le département d’orthodontie et d’odontologie pédiatrique. Il est également professeur émérite de biologie cellulaire et du développement à la faculté de médecine de l’Université du Michigan, et professeur émérite chargé de recherche au Centre de la croissance et du développement humains. Il est l’auteur (avec l’artiste William L. Brudon) de Orthodontics and Dentofacial Orthopedics, manuel très largement utilisé.

Caspase-12 is involved in stretch-induced apoptosis mediated endoplasmic reticulum stress

It is well recognized that mandibular growth, which is caused by a variety of functional appliances, is considered to be the result of both neuromuscular and skeletal adaptations. Accumulating evidence has demonstrated that apoptosis plays an important role in the adaptation of skeletal muscle function. However, the underlying mechanism of apoptosis that is induced by stretch continues to be incompletely understood. Endoplasmic reticulum stress (ERS), a newly defined signaling pathway, initiates apoptosis. This study seeks to determine if caspase-12 is involved in stretch-induced apoptosis mediated endoplasmic reticulum stress in myoblast and its underlying mechanism. Apoptosis was assessed by Hochest staining, DAPI staining and annexin V binding and PI staining. ER chaperones, such as GRP78, CHOP and caspase-12, were determined by reverse transcription polymerase chain reaction (RT-PCR) and Western blot. Furthermore, caspase-12 inhibitor was used to value the mechanism of the caspase-12 pathway. Apoptosis of myoblast, which is subjected to cyclic stretch, was observed in a time-dependent manner. We found that GRP78 mRNA and protein were significantly increased and CHOP and caspase-12 were activated in myoblast that was exposed to cyclic stretch. Caspase-12 inhibition reduced stretch-induced apoptosis, and caspase-12 activated caspase-3 to induce apoptosis. We concluded that caspase-12 played an important role in stretch-induced apoptosis that is associated by endoplasmic reticulum stress by activating caspase-3.

The use of functional appliances in contemporary orthodontic practice

Functional appliances have been used for over 100 years in orthodontics to correct Class II malocclusion. During this time numerous different systems have been developed often accompanied by claims of modification and enhancement of growth. Recent clinical evidence has questioned whether they really have a lasting influence on facial growth, their skeletal effects appearing to be short term. However, despite these findings, the clinical effectiveness of these appliances is acknowledged and they can be very useful in the correction of sagittal arch discrepancies. This article will discuss the clinical use of functional appliances, the underlying evidence for their use and their limitations.

Comparison of volume and position of the temporomandibular joint structures in patients with mandibular asymmetry

OBJECTIVE

To evaluate the volume and position of the temporomandibular joint structures, specifically the glenoid fossa and the condylar head, in patients with facial asymmetry.

STUDY DESIGN

Fifty-six adult patients were divided into two groups-asymmetry group and control group-based on the severity of the mandibular asymmetry, as seen on their orthopantomograms. The volumes and positions of the bilateral temporomandibular joint components were measured by using computed tomography images and a three-dimensional analysis program. Each of the variables was compared between and within the groups.

RESULTS

The volumes of the condyle and the glenoid fossa on the side of the smaller condyle were significantly smaller in the asymmetry group (P < .05) than in the control group. The volumetric ratios of the glenoid fossa and the joint space to the condyle were also significantly higher on that side (P < .001). The distance of the uppermost point of the glenoid fossa from the midaxial plane in the smaller condyle was significantly shorter (P < .05) only in the asymmetry group.

CONCLUSIONS

When evaluating mandibular asymmetry, the volume of the glenoid fossa and the volume and vertical position of the condylar head need to be considered in addition to length or width of the condylar head.

Surgical Treatment of Class III Malocclusion: Monozygotic Twin

Mandibular deformities present with infinite variation with different aesthetic and functional problems. Orthognathic surgery is required to achieve satisfactory results for functional and aesthetically in mandibular prognathism patient. Setback of the mandible to correct mandibular prognathism is a well-known procedure. The 2 most frequently used techniques are the intraoral vertical ramus osteotomy and the bilateral sagittal split ramus osteotomy (BSSRO). Bilateral sagittal split ramus osteotomy is an effective and commonly used method to correct mandibular prognathism. In this patient report, mandibular prognathism in female monozygotic twin patients was treated with BSSRO is presented.

Treatment of a mandibular functional shift in an adolescent boy with temporomandibular disorder and crossbites

A mandibular functional shift usually poses a challenge for orthodontists, especially when it is accompanied by a temporomandibular disorder (TMD). Accurate diagnosis and complete elimination of the etiologic factors are the keys to an esthetic and stable outcome. This article describes the treatment of a teenager with a mandibular functional shift, TMD symptoms, and facial asymmetry resulting from an asymmetric maxillary arch form and multiple crossbites as occlusal interferences. The treatment alternatives and effective orthodontic techniques are described. To optimize the treatment results and prevent the recurrence of the TMD after treatment, the displaced mandible was repositioned by full-time wearing of a splint for 10 months. Adhesive bite-blocks were used to maintain the newly acquired mandibular position during fixed appliance treatment. A series of nickel-titanium and stainless steel rectangular archwires was placed in the maxillary arch to reshape it for 8 months after alignment. Finally, the displaced mandible was steadily seated into its physiologic position with fine occlusion. The TMD symptoms disappeared and never relapsed after treatment. At 2 years 3 months of retention, there was good stability. The combined splint and fixed appliance approach resolved an intractable clinical problem and avoided using additional appliances. An esthetic, functional, and stable outcome was achieved that satisfied both the patient and his parents.

Treatment effects of myofunctional appliances in different jaw rotations in Class II division 1 malocclusion

Aim

This retrospective study was conducted to determine skeletal, dentoalveolar changes in children treated with Twin Block or activator for the treatment of Class II Division 1 malocclusion with different jaw rotations.

Materials and Methods

Standardized lateral cephalograms of 32 patients (18 boys, 14 girls) between the ages of 11 and 14 years were chosen and divided into two groups, high angle (FMA >27) and low angle (FMA <20). Cephalograms were taken at T1 (pre-treatment) and T2 (after one year of myofunctional therapy).These were manually traced and analysed.

Results

The results showed statistically significant increase in SNB angle, VRP-Pog due to forward movement of the mandible. The overjet reduced significantly due to retroclination of upper incisors and proclination of lower incisors in both groups.

Conclusion

It was concluded that both high angle and low angle groups responded equally well to myofunctional therapy showing significant skeletal and dentoalveolar changes.

Three-dimensional treatment outcomes in Class II patients treated with the Herbst appliance: a pilot study

INTRODUCTION

The aims of this study were to analyze 3-dimensional skeletal changes in subjects with Class II malocclusion treated with the Herbst appliance and to compare these changes with treated Class II controls using 3-dimensional superimposition techniques.

METHODS

Seven consecutive Herbst patients and 7 Class II controls treated with Class II elastics who met the inclusion criteria had cone-beam computed tomographs taken before treatment, and either after Herbst removal or at posttreatment for the control subjects. Three-dimensional models were generated from the cone-beam computed tomography images, registered on the anterior cranial bases, and analyzed using color maps and point-to-point measurements.

RESULTS

The Herbst patients demonstrated anterior translation of the glenoid fossae and condyles (right anterior fossa, 1.69 ± 0.62 mm; left anterior fossa, 1.43 ± 0.71 mm; right anterior condyle, 1.20 ± 0.41 mm; left anterior condyle, 1.29 ± 0.57 mm), whereas posterior displacement predominated in the controls (right anterior fossa, -1.51 ± 0.68 mm; left anterior fossa, -1.31 ± 0.61 mm; right anterior condyle, -1.20 ± 0.41 mm; left anterior condyle, -1.29 ± 0.57 mm; P <0.001). There was more anterior projection of B-point in the Herbst patients (2.62 ± 1.08 mm vs 1.49 ± 0.79 mm; P <0.05). Anterior displacement of A-point was more predominant in the controls when compared with the Herbst patients (1.20 ± 0.53 mm vs -1.22 ± 0.43 mm; P <0.001).

CONCLUSIONS

Class II patients treated with the Herbst appliance demonstrated anterior displacement of the condyles and glenoid fossae along with maxillary restraint when compared with the treated Class II controls; this might result in more anterior mandibular projection.

Vertical facial height and its correlation with facial width and depth: Three dimensional cone beam computed tomography evaluation based on dry skulls

Introduction

The aim of the present study was to evaluate how vertical facial height correlates with mandibular plane angle, facial width and depth from a three dimensional (3D) viewing angle.

Methods

In this study 3D cephalometric landmarks were identified and measurements from 43 randomly selected cone beam computed tomography (CBCT) images of dry skulls from the Weisbach collection of Vienna Natural History Museum were analyzed. Pearson correlation coefficients of facial height measurements and mandibular plane angle and the correlation coefficients of height-width and height-depth were calculated, respectively.

Results

The mandibular plane angle (MP-SN) significantly correlated with ramus height (Co-Go) and posterior facial height (PFH) but not with anterior lower face height (ALFH) or anterior total face height (ATFH). The ALFH and ATFH showed significant correlation with anterior cranial base length (S-N), whereas PFH showed significant correlation with the mandible (S-B) and maxilla (S-A) anteroposterior position.

Conclusions

High or low mandibular plane angle might not necessarily be accompanied by long or short anterior face height, respectively. The PFH rather than AFH is assumed to play a key role in the vertical facial type whereas AFH seems to undergo relatively intrinsic growth.

Occlus-o-Guide® versus Andresen activator appliance: neuromuscular evaluation

BACKGROUND

The aim of the present study was to assess the muscular variations at the electromyography (EMG) level for the anterior temporalis muscles and masseter muscles during treatment with Occlus-o-Guide® and Andresen activator appliances.

METHODS

Eighty-two patients (35 males and 47 females) aged between 8 and 12 years (mean age, 10.5±0.8 years) participated in the study. Fifty patients underwent treatment with an Occlus-o-Guide® and 32 patients with an Andresen activator. All patients underwent EMG examination using a Freely EMG (De Gotzen, Legnano, Italy) and surface bipolar electrodes when the appliances were worn for the first time (T0), and after 6 months (T1) and after 12 months (T2) of appliance use.

RESULTS

Statistical analysis showed that both at T0 and T2, the percent overlapping coefficient (POC) of the anterior temporalis muscles was not statistically different between the appliance groups. At T0, the POC of the masseter muscles was significantly lower for the Andresen appliance as compared to the Occlus-o-Guide® (p=0.02), while at T2 this significance was lost.

CONCLUSIONS

At insertion of an appliance, all patients show neuromuscular balance that does not correspond to orthognathic occlusion. Both appliances work by creating muscular imbalance. With the appliances in situ, EMG responses were generally analogous for the Occlus-o-Guide® and the Andresen activator; however, the imbalance was greater and the recovery of the orthological muscular balance was slower in patients under treatment with the Andresen activator as compared to those with the Occlus-o-Guide®.

Effectiveness of bionator therapy for Class II malocclusions: a comparative long-term study

OBJECTIVE

The goal of this retrospective study was to examine the effectiveness of isolated bionator therapy in Class II patients both longitudinally and over the long term. We aimed to determine whether skeletal and/or dentoalveolar reactions differ in relationship to the Angle Class (II, Division 1 vs. II, Division 2).

PATIENTS AND METHODS

A total of 50 juvenile patients with Class II malocclusion (♀ n = 26, ♂ n = 24) were included. A total of 24 patients presented an Angle Class II, Division 1 and 26 an Angle Class II, Division 2. We compared the patients' lateral cephalograms taken at the beginning of treatment (t1: 10.1 years), after active therapy (t2: 13.8 years), and at the end of retention (t3: 16.4 years) analyzing the following cephalometric parameters: SNA, SNB, ANB, ANB(ind), SNPog, Wits appraisal, U1-SN, U1-SpP, L1-MeGo, interincisal angle. Mean and standard deviations of each of the variables were calculated. Differences between t1-t2 and t2-t3 were tested for statistical significance. Changes in the variables were then analyzed biometrically for specific differences in terms of Angle Class (II, Division 1 vs. II, Division 2).

RESULTS

Between t1 and t2, SNB (p = 0.000) and SNPog (p = 0.000) increased significantly, as did ANB (p = 0.000), while the difference between ANB and ANB(ind) (p = 0.000) and Wits appraisal (p = 0.000) decreased significantly. The dentoalveolar variables U1-SN, U1-SpP, and the interincisal angle changed significantly in both groups. The inclination of the upper incisors was corrected by retrusion in the Class II, Division 1 and by protrusion in the Class II, Division 2 group. Only marginal changes in all variables between t2 and t3 were observed.

CONCLUSION

A significant skeletal effect (even in long-time stability) through bionator treatment could be confirmed in this study of Class II, Divisions 1 and 2 patients. The desired effect on the upper front teeth was realized, and there was no appreciable dentoalveolar compensation in the mandible.

Effect of bimaxillary surgery on adaptive condylar head remodeling: metric analysis and image interpretation using cone-beam computed tomography volume superimposition

PURPOSE

The aim of the present study was to use cone-beam computed tomography volume superimposition to investigate the effect of bimaxillary orthognathic surgery on condylar head remodeling.

MATERIALS AND METHODS

Using a retrospective study design, 2 investigators evaluated the cone-beam computed tomography data of subjects who had undergone Le Fort I osteotomy and mandibular setback surgery. The predictor variable was time, grouped as preoperative versus postoperative. The outcome variables were the measurement changes of the condylar heads and the distribution of the condylar head remodeling signs. Paired t and χ(2) tests were performed for the purposes of the 2-dimensional metric analysis and the condylar head remodeling distribution. P < .05 was considered significant.

RESULTS

The sample was composed of 22 adults (11 men and 11 women, age 20.3 ± 3.2 years) diagnosed with skeletal Class III malocclusion. The intra- and interoperator reliabilities of the image interpretation showed substantial agreement, according to Cohen's kappa index. The condylar heights on the sagittal and coronal planes decreased after surgery. Bone resorption occurred predominantly in the anterior and superior areas on the sagittal plane, the superior and lateral areas on the coronal plane, and the anterolateral and posterolateral areas on the axial plane (P < .05). Bone formation was apparent only in the anteromedial area on the axial plane (P < .05).

CONCLUSIONS

Bimaxillary orthognathic surgery caused a decrease in the condylar heights and condylar head remodeling. The cone-beam computed tomography volume superimposition method showed that the condylar head had undergone remodeling after bimaxillary surgery.

Treatment of class II division 1 malocclusion with myofunctional trainer system in early mixed dentition period

Dentofacial growth interferences, caused by abnormal lip and tongue function in the mixed dentition period are a common clinical condition. The main purpose of the treatment in such cases is to eliminate oral dysfunction, establish muscular balance and correct or diminish maxillary incisor protrusion. The position of the teeth is determined by the lip and tongue pressure. Lip function may have been the cause of forcing teeth in to malposition they occupy. The case report is presented where the myofunctional trainer T4K is used during growth phase.

Orthopedic and orthodontic treatment of Parry-Romberg syndrome

Parry-Romberg syndrome (PRS) is a degenerative disease characterized by progressive hemifacial atrophy of soft and hard tissues. A 10-year-old girl who had been treated for linear scleroderma at the dermatologic department since the age of 9 years visited the orthodontic department. The frontal facial photograph showed mild facial asymmetry. On the left side, mild atrophy of soft tissue, mild enophthalmos, cheek depression, and dry skin with dark pigmentation were observed. The radiograph showed hypoplasia of both the maxilla and mandible on the left side. Intraorally, she was in the mixed dentition with the dental crowding. This case report describes the treatment of a patient with PRS for 7 years. To minimize the effect of progressive atrophy on facial growth, a functional appliance was used. The facial photographs and radiographic records were periodically taken to analyze the progression of PRS. Although it is impossible to prevent the progress of facial asymmetry, it appears to be possible to limit the atrophic effect on the mandible by stimulating the mandibular growth. After stabilization of PRS, orthodontic treatment by fixed appliance was performed. In addition, autologous fat graft was performed 3 times at 6-month intervals. After the treatment, the patient had a confident smile, and facial asymmetry was improved.

Validity of upper airway assessment in children: a clinical, cephalometric, and MRI study

OBJECTIVE

To test the hypothesis that the capability of two-dimensional lateral cephalogram in recognizing pharyngeal obstruction is poor compared with the capability of three-dimensional magnetic resonance imaging (MRI) and clinical observation of tonsillar size.

MATERIALS AND METHODS

The study participants were 36 prepubertal children (19 male, 17 female; mean age 7.3 ± 1.43 years, range 4.8-9.8 years) with sleep-disordered breathing diagnosed by nocturnal polygraphy. Pharyngeal airway was imaged with a low-field open-configuration MRI scanner. Tonsillar size was clinically determined and lateral skull radiographs were taken and measured. Pearson correlation coefficients were calculated between the clinical, cephalometric, and MRI variables.

RESULTS

Nasopharyngeal and retropalatal cephalometric variables had a significant positive correlation with the MRI findings. Both techniques showed the narrowest measurement to be located in the retropalatal region. Clinical assessment of tonsillar size correlated inversely with MRI findings such as minimal retropalatal cross-sectional airway area (P  =  .000), minimal retroglossal cross-sectional airway area (P  =  .015), and intertonsillar airway width (P  =  .000). Cephalometric soft palate and tonsillar area correlated with clinical tonsillar size (P  =  .001).

CONCLUSIONS

The hypothesis is rejected. The findings confirm that the lateral cephalogram is a valid method for measuring dimensions of the nasopharyngeal and retropalatal region. When evaluating oropharyngeal size, clinical assessment of tonsillar size is a relatively reliable method.

Dentaoalveolar changes in young adult patients with Class II/1 malocclusion treated with the Herbst appliance and an activator

Background/Aim. Functional appliances can be used effectively in the treatment of skeletal Class II/1 malocclusions. The best treatment results are obtained during active period of facial growth when skeletal, as well as dentoalveolar, changes occur. In comparison with removable functional appliances, such as activator, that are effective only during adolescent period of growth, the Herbst fixed appliance is also successful at the end of the growth period. It also offers a shorter treatment time and a patient compliance is not necessary. The aim of this study was to analyze and compare dentoalveolar changes in the group of young adult patients with Class II/1 malocclusion treated with the Herbst appliance and an activator. Methods. The sample for this study consisted of 50 patients of both sexes, 14-21 years of age with Class II/1 malocclusion. For estimating the effect of functional appliances used, the following cephalometrics parameters were determined: inclination of the upper and lower incisors, interincisal angle, antero-posterior molars relationships, overjet and overbite. The results obtained were statistically tested. Results. The cephalometric findings after the treatment indicated retroinclination of upper incisors (average value of 9?) and proclination of lower incisors (average value of 7?), mostly expressed in the patients treated by Herbst appliance (p < 0.001). Increased overjet and distocclusion were completely corrected in the group of patients treated with the Herbst appliance, while the correction of malocclusion in the activator group was only partially accomplished. No changes in the overbite were noticed at the end of the treatment in both groups. Conclusion. The results of this study revealed that the Herbst appliance is more effective in the treatment of Class II/1 malocclusion in young adults in comparison with the activator.

Mandibular incisor position changes in relation to amount of bite jumping during Herbst/multibracket appliance treatment: a radiographic-cephalometric study

INTRODUCTION

The aim of this study was to analyze the effect of the cast Herbst/multibracket (MB) appliance on the position of the mandibular incisors in relation to the amount of mandibular advancement at the beginning of treatment.

METHODS

We screened 133 patients with Class II Division 1 malocclusions. The subjects were divided into 3 bite-jumping groups: I, 49 subjects with bite jumping of <7 mm; II, 44 subjects with bite jumping of 7.5 to 9.5 mm; and III, 40 subjects with bite jumping of >9.5 mm. Only group I with small (S) and group III with large (L) bite jumping were considered. The average ages of the subjects in the 2 bite-jumping groups were 13.6 +/- 2.4 years in the S group and 14.7 +/- 4.7 years in the L group. The average treatment time with the Herbst/MB appliance was 19 months. Lateral headfilms were evaluated at 3 times: before Herbst treatment, after Herbst treatment, and after MB treatment.

RESULTS

During the Herbst phase, the mandibular incisors were significantly intruded, protruded, and proclined in both bite-jumping groups. Larger tooth movements occurred in group L than in group S. During the MB phase, comparable relapsing incisor tooth movements were seen in the 2 bite-jumping groups. There was moderate correlation between bite-jumping and incisor position changes during the Herbst and the Herbst/MB treatment periods. No associations were found between the amount of bite jumping and the changes of sagittal and vertical jaw relationships, age, and treatment growth period.

CONCLUSIONS

During the Herbst treatment period, there was an association between bite jumping and movement of the mandibular incisors: the greater the bite jumping, the larger the intrusion, protrusion, and proclination of teeth. During the MB treatment period, relapsing incisor tooth movements occurred that were independent of the original amount of bite jumping.