Hydrogenation of triton X-100 eliminates its fluorescence and ultraviolet light absorption while preserving its detergent properties

The Effect of Different Surfactants and Polyelectrolytes on Nano-Vesiculation of Artificial and Cellular Membranes

Nano- and micro-sized vesicular and colloidal structures mediate cell-cell communication. They are important players in the physiology of plants, animals, and humans, and are a subject of increasing interest. We investigated the effect of three surfactants, N-cetylpyridinium chloride (CPC), sodium dodecyl sulfate (SDS), and Triton X-100 (TX100), and two anionic polyelectrolytes, sodium polystyrene sulfonate (NaPSS) and sodium polymethacrylate (NaPMA), on nanoliposomes. In addition, the effect of SDS and TX100 on selected biological membranes (erythrocytes and microalgae) was investigated. The liposomes were produced by extrusion and evaluated by microcalorimetry and light scattering, based on the total intensity of the scattered light (Itot), hydrodynamic radius (Rh), radius of gyration (Rg), shape parameter p (=Rh/Rg,0), and polydispersity index. The EPs shed from erythrocytes and microalgae Dunaliella tertiolecta and Phaeodactylum tricornutum were visualized by scanning electron microscopy (SEM) and analyzed by flow cytometry (FCM). The Rh and Itot values in POPC liposome suspensions with added CPC, SDS, and TX100 were roughly constant up to the respective critical micelle concentrations (CMCs) of the surfactants. At higher compound concentrations, Itot dropped towards zero, whereas Rh increased to values higher than in pure POPC suspensions (Rh ≈ 60-70 nm), indicating the disintegration of liposomes and formation of larger particles, i.e., various POPC-S aggregates. Nanoliposomes were stable upon the addition of NaPSS and NaPMA, as indicated by the constant Rh and Itot values. The interaction of CPC, SDS, or TX100 with liposomes was exothermic, while there were no measurable heat effects with NaPSS or NaPMA. The SDS and TX100 increased the number density of EPs several-fold in erythrocyte suspensions and up to 30-fold in the conditioned media of Dunaliella tertiolecta at the expense of the number density of cells, which decreased to less than 5% in erythrocytes and several-fold in Dunaliella tertiolecta. The SDS and TX100 did not affect the number density of the microalgae Phaeodactylum tricornutum, while the number density of EPs was lower in the conditioned media than in the control, but increased several-fold in a concentration-dependent manner. Our results indicate that amphiphilic molecules need to be organized in nanosized particles to match the local curvature of the membrane for facilitated uptake. To pursue this hypothesis, other surfactants and biological membranes should be studied in the future for more general conclusions.

Impact of four surfactants on the uptake of per- and polyfluoroalkyl substances (PFAS) by red fescue grass

Per- and polyfluoroalkyl substances (PFAS) pose great risks to human health and the ecosystem, necessitating effective remediation strategies such as phytoremediation. Surfactants, due to their ability to increase the bioavailability of hydrophobic contaminants, are considered as potential agents to improve phytoremediation for PFAS. In this research, we explored the impact of four surfactants (sodium dodecyl sulfate (SDS), rhamnolipid, Triton X-100, and Glucopone 600 CS UP) on plant growth and the uptake of PFAS by red fescue over 110 days. The results showed that while surfactants at lower concentrations did not negatively affect plant growth, the highest dose (2,500 mg/kg) significantly reduced the dry weight of plant shoots. Although none of the four surfactants led to an increased overall removal efficiency of ∑PFAS by red fescue over 110 days, SDS did enhance the uptake of PFAS compounds with long carbon chain lengths. With SDS addition at 2,500 mg/kg, the average fold increases of long chain PFAS removal were 1.99 for perfluorooctanoic acid (PFOA), 2.44 for perfluorononanoic acid (PFNA), 2.11 for perfluorodecanoic acid (PFDA), 1.52 for perfluoroundecanoic acid (PFUnA), 1.88 for perfluorohexanesulphonic acid (PFHxS), and 2.97 for perfluorooctanesulfonic acid (PFOS). The research indicated that using surfactants, such as SDS at appropriate doses could improve phytoremediation effectiveness in mitigating long-chain PFAS, which is a known challenge in soil remediation.

Unraveling the Biophysical Mechanisms of How Antiviral Detergents Disrupt Supported Lipid Membranes: Toward Replacing Triton X-100

Triton X-100 (TX-100) is a membrane-disrupting detergent that is widely used to inactivate membrane-enveloped viral pathogens, yet is being phased out due to environmental safety concerns. Intense efforts are underway to discover regulatory acceptable detergents to replace TX-100, but there is scarce mechanistic understanding about how these other detergents disrupt phospholipid membranes and hence which ones are suitable to replace TX-100 from a biophysical interaction perspective. Herein, using the quartz crystal microbalance-dissipation (QCM-D) and electrochemical impedance spectroscopy (EIS) techniques in combination with supported lipid membrane platforms, we characterized the membrane-disruptive properties of a panel of TX-100 replacement candidates with varying antiviral activities and identified two distinct classes of membrane-interacting detergents with different critical micelle concentration (CMC) dependencies and biophysical mechanisms. While all tested detergents formed micelles, only a subset of the detergents caused CMC-dependent membrane solubilization similarly to that of TX-100, whereas other detergents adsorbed irreversibly to lipid membrane interfaces in a CMC-independent manner. We compared these biophysical results to virus inactivation data, which led us to identify that certain membrane-interaction profiles contribute to greater antiviral activity and such insights can help with the discovery and validation of antiviral detergents to replace TX-100.

Detergent-Mediated Virus Inactivation in Biotechnological Matrices: More than Just CMC

For decades, the ability of detergents to solubilize biological membranes has been utilized in biotechnological manufacturing to disrupt the lipid envelope of potentially contaminating viruses and thus enhance the safety margins of plasma- and cell-derived drugs. This ability has been linked to detergent micelles, which are formed if the concentration of detergent molecules exceeds the critical micelle concentration (CMC). Traditionally, the CMC of detergents is determined in deionized water (ddH₂O), i.e., a situation considerably different from the actual situation of biotechnological manufacturing. This study compared, for five distinct detergents, the CMC in ddH₂O side-by-side with two biopharmaceutical process intermediates relevant to plasma-derived (Immunoglobulin) and cell-derived (monoclonal antibody) products, respectively. Depending on the matrix, the CMC of detergents changed by a factor of up to ~4-fold. Further, the CMC in biotechnological matrices did not correlate with antiviral potency, as Triton X-100 (TX-100) and similar detergents had comparatively higher CMCs than polysorbate-based detergents, which are known to be less potent in terms of virus inactivation. Finally, it was demonstrated that TX-100 and similar detergents also have virus-inactivating properties if applied below the CMC. Thus, the presence of detergent micelles might not be an absolute prerequisite for the disruption of virus envelopes.

Surface-Mediated Molecular Transport of a Lipophilic Fluorescent Probe in Polydisperse Oil-in-Water Emulsions

Emulsions often act as carriers for water-insoluble solutes that are delivered to a specific target. The molecular transport of solutes in emulsions can be facilitated by surfactants and is often limited by diffusion through the continuous phase. We here investigate this transport on a molecular scale by using a lipophilic molecular rotor as a proxy for solutes. Using fluorescence lifetime microscopy we track the transport of these molecules from the continuous phase toward the dispersed phase in polydisperse oil-in-water emulsions. We show that this transport comprises two time scales, which vary significantly with droplet size and surfactant concentration, and, depending on the type of surfactant used, can be limited either by transport across the oil-water interface or by diffusion through the continuous phase. By studying the time-resolved fluorescence of the fluorophore, accompanied by molecular dynamics simulations, we demonstrate how the rate of transport observed on a macroscopic scale can be explained in terms of the local environment that the probe molecules are exposed to.

Amberlite XAD-4 is a convenient tool for removing Triton X-100 and Sarkosyl from protein solutions

Amberlite has been shown to be an appropriate material for the adsorption of organic contaminants from aqueous solutions. In addition, Amberlite XAD-2 has been successfully used, as an alternative to Bio-Beads, to remove Triton X-100 from protein solutions, such as from samples of solubilized membrane proteins. However, Amberlite has not been tested as an adsorbent when a mixture of detergents is necessary to solubilize and refold a target protein. Here the authors show that Amberlite XAD-4 can be appropriately used to aid the purification process of proteins solubilized from inclusion bodies with the ternary detergent system consisting of Sarkosyl, Triton X-100 and CHAPS.

Membrane fission during bacterial spore development requires cellular inflation driven by DNA translocation

Bacteria require membrane fission for both cell division and endospore formation. In Bacillus subtilis, sporulation initiates with an asymmetric division that generates a large mother cell and a smaller forespore that contains only a quarter of its genome. As the mother cell membranes engulf the forespore, a DNA translocase pumps the rest of the chromosome into the small forespore compartment, inflating it due to increased turgor. When the engulfing membrane undergoes fission, the forespore is released into the mother cell cytoplasm. The B. subtilis protein FisB catalyzes membrane fission during sporulation, but the molecular basis is unclear. Here, we show that forespore inflation and FisB accumulation are both required for an efficient membrane fission. Forespore inflation leads to higher membrane tension in the engulfment membrane than in the mother cell membrane, causing the membrane to flow through the neck connecting the two membrane compartments. Thus, the mother cell supplies some of the membrane required for the growth of the membranes surrounding the forespore. The oligomerization of FisB at the membrane neck slows the equilibration of membrane tension by impeding the membrane flow. This leads to a further increase in the tension of the engulfment membrane, promoting its fission through lysis. Collectively, our data indicate that DNA translocation has a previously unappreciated second function in energizing the FisB-mediated membrane fission under energy-limited conditions.

Near-Infrared Dye-Aptamer Assay for Small Molecule Detection in Complex Specimens

Aptamers are single-stranded oligonucleotides isolated in vitro that bind specific targets with high affinity and are commonly used as receptors in biosensors. Aptamer-based dye-displacement assays are a promising sensing platform because they are label-free, sensitive, simple, and rapid. However, these assays can exhibit impaired sensitivity in biospecimens, which contain numerous interferents that cause unwanted absorbance, scattering, and fluorescence in the UV-vis region. Here, this problem is overcome by utilizing near-infrared (NIR) signatures of the dye 3,3'-diethylthiadicarbocyanine iodide (Cy5). Cy5 initially complexes with aptamers as monomers and dimers; aptamer-target binding displaces the dye into solution, resulting in the formation of J-aggregates that provide a detectable NIR signal. The generality of our assay is demonstrated by detecting three different small-molecule analytes with their respective DNA aptamers at clinically relevant concentrations in serum and urine. These successful demonstrations show the utility of dye-aptamer NIR biosensors for high-throughput detection of analytes in clinical specimens.

Development of a carbon dot and methylene blue NIR-emitting FLIM-FRET pair in niosomes for controlled ROS generation

Non-ionic surfactant vesicular systems (niosomes) are structurally similar to lipid vesicles, differing only in the bilayer composition. Herein we report a unique method to generate reactive oxygen species (ROS) utilizing a FLIM-FRET technique involving niosome-trapped yellow emissive carbon dots (YCDs) and methylene blue (MB) in aqueous medium under neutral conditions. Niosomes are biologically important because of their good stability and extremely low toxicity. Fluorescent CDs, emitting in the higher wavelengths on visible light excitation, are of incredible importance in bio-imaging and optoelectronics. Hence, we prepared nitrogen-containing YCDs from a single precursor, o-phenylenediamine, and explained their detailed photophysics upon incorporation into the niosomal bilayer. The YCDs are polarity sensitive, and are rotationally restricted in niosomes, which increases their fluorescence quantum yield from 29% (in water) to 91%. These YCDs are tactically employed to develop a near infrared (NIR) FRET pair with methylene blue (MB), which is a very well-known type-I and type-II photosensitizer. This FRET pair, which emits in the NIR region, is found to be an ideal system to generate ROS by excitation in the lower visible wavelengths. Interestingly, the ROS production by MB from the dissolved oxygen is enhanced inside the niosomes. The donor and the acceptor moieties in this unique NIR-emitting FRET pair display an unprecedented 300 nm Stokes shift. The findings could be influential in bio-imaging in the NIR region evading cellular autofluorescence and the controllably generated ROS can be further applied as a potential photodynamic therapeutic agent.

Synthesis of fluorescent organic nano-dots and their application as efficient color conversion layers

Efficient conversion of light from short wavelengths to longer wavelengths using color conversion layers (CCLs) underpins the successful operation of numerous contemporary display and lighting technologies. Inorganic quantum dots, based on CdSe or InP, for example, have received much attention in this context, however, suffer from instability and toxic cadmium or phosphine chemistry. Organic nanoparticles (NPs), though less often studied, are capable of very competitive performance, including outstanding stability and water-processability. Surfactants, which are critical in stabilizing many types of nano-structures, have not yet been used extensively in organic NPs. Here we show the utility of surfactants in the synthesis and processing of organic NPs by thoroughly characterizing the effect of ionic and non-ionic surfactants on the properties of fluorescent organic NPs. Using this information, we identify surfactant processing conditions that result in nearly 100 % conversion of organic fluorophores into sub-micrometer particles, or nano-dots, with outstanding performance as CCLs. Such water dispersions are environmentally benign and efficiently convert light. They can be used for a range of fluorophores covering a full spectral gamut, with excellent color purity, including full-width at half-maximum (FWHM) values as low as 21 nm. Compared to inorganic (InP) reference CCLs, the organic nano-dot based CCLs show superior color conversion efficiency and substantially improved long-term stability.

Elucidating the Effect of Aliphatic Molecular Plugs on Ion-Rejecting Properties of Polyamide Membranes

Polyamide RO membranes are widely used for seawater desalination owing to their high salt rejection and water permeability; however, improved selectivity-permeability trade-off is still desired. "Molecular plugs," small molecules immobilized within the polyamide structure, offer an attractive approach; however, their overall effect on polyamide physicochemical properties poses many questions. Here, we analyze the effect of decylamine, a promising plug, and a few charged and uncharged mimics on polyamide films using several in situ techniques. Electrochemical impedance spectroscopy (EIS) reveals a complex pH-dependent response, whereby, upon exposure to amine solution, conductivity first rapidly drops; however, under alkaline conditions, when amine is uncharged, the trend subsequently slowly reverses, and conductivity increases. This slow reversal was observed for noncharged alcohols of similar size as well, but not for larger surfactant molecules. The reversal was assigned to the uptake of plug molecules within polyamide, as opposed to the fast initial drop assigned to surface adsorption. EIS and quartz-crystal microbalance (QCM) results showed that exposure to decylamine under alkaline conditions ultimately led to an irreversible decrease in conductivity, that is, stronger ion rejection, remaining after re-exposure of polyamide to amine-free buffer. This suggests that plug uptake within polyamide resulted in polymer stress, indeed observed in surface stress measurements, and subsequent relaxation. The results indicate that the moderate size of decylamine and conditions minimizing its charge were optimal for irreversible change; however, charge interactions helped maximize its binding within polymer and induce the desired sustained change in selectivity. The results have many potential implications for improving current membrane desalination technology and increasing inherent membrane selectivity toward hard-to-remove species.

Aurone-derived 1,2,3-triazoles as potential fluorescence molecules in vitro

Aurones are a class of naturally occurring compounds with fluorescent derivatives. Here we show a newly synthesized derivative of aurones containing a 1,2,3-triazole which is fluorescent in aqueous environments and has potential to be used as a probe in vitro.

A novel approach for the purification of aggregation prone proteins

The protein aggregation is one of the major challenges of the biotechnological industry, especially in the areas of development and commercialization of successful protein-based drug products. The inherent high aggregation tendency of proteins during various manufacturing processes, storage, and administration has significant impact upon the product quality, safety and efficacy. We have developed an interesting protein purification approach that separates the functionally active protein from inactive aggregates using a detergent concentration gradient. The C-terminally His tagged nucleocapsid protein of Crimean Congo Hemorrhagic fever virus (CCHFV) has high aggregation tendency and rapidly precipitates upon purification by NiNTA chromatography. Using the new purification approach reported here, the freshly purified protein by NiNTA chromatography was further processed using a detergent gradient. In this new purification approach the active protein is retained in the low detergent concentration zone while the inactive aggregates are promptly removed by their rapid migration to the high detergent concentration zone. The method prevented further aggregation and retained the RNA binding activity in the native protein despite numerous freeze thaw cycles. This simple approach prevents protein aggregation by rapidly separating the preformed early aggregates and creating the appropriate microenvironment for correctly folded proteins to retain their biological activity. It will be of potential importance to the biotechnological industry and other fields of protein biochemistry that routinely face the challenges of protein aggregation.

Kinetic stability modulation of polymeric nanoparticles for enhanced detection of influenza virus via penetration of viral fusion peptides

Specific interactions between viruses and host cells provide essential insights into material science-based strategies to combat emerging viral diseases. pH-triggered viral fusion is ubiquitous to multiple viral families and is important for understanding the viral infection cycle. Inspired by this process, virus detection has been achieved using nanomaterials with host-mimetic membranes, enabling interactions with amphiphilic hemagglutinin fusion peptides of viruses. Most research has been on designing functional nanoparticles with fusogenic capability for virus detection, and there has been little exploitation of the kinetic stability to alter the ability of nanoparticles to interact with viral membranes and improve their sensing performance. In this study, a homogeneous fluorescent assay using self-assembled polymeric nanoparticles (PNPs) with tunable responsiveness to external stimuli is developed for rapid and straightforward detection of an activated influenza A virus. Dissociation of PNPs induced by virus insertion can be readily controlled by varying the fraction of hydrophilic segments in copolymers constituting PNPs, giving rise to fluorescence signals within 30 min and detection of various influenza viruses, including H9N2, CA04(H1N1), H4N6, and H6N8. Therefore, the designs demonstrated in this study propose underlying approaches for utilizing engineered PNPs through modulation of their kinetic stability for direct and sensitive identification of infectious viruses.

Modeling the saturation of detergent association in mixed liposome systems

Cells tune the lipid types present in their membranes to adjust for thermal and chemical stability, as well as to promote association and dissociation of small molecules and bound proteins. Understanding the influence of lipid type on molecule association would open doors for targeted cell therapies, in particular when molecular association is observed in the presence of competing membranes. For this reason, we modeled and experimentally observed the association of a small molecule with two membrane types present by measuring the association of the detergent Triton X-100 with two types of liposomes, egg phosphatidylcholine (ePC) liposomes and egg phosphatidic acid (ePA) liposomes, at varying ratios. We called this mixed liposomes, as each liposome population was formed from a different lipid type. Absorbance spectrometry was used to observe the stages of detergent association with mixed liposomes and to determine the detergent concentration at which the liposomes were fully saturated. A saturation model was also derived that predicts the detergent associated with each liposome type when the lipid bilayers are fully saturated with detergent. The techinical input parameters for the model are the detergent to lipid ratio and the relative absorbance intensity for each of the pure liposome species at saturation. With that, the association of detergent with any mixture of those liposome types at saturation can be determined.

Effect of emulsifiers on the discoloration of chlorophyll and their potential for use in green beverages

The discoloration of chlorophyll (Chl) by light is an ongoing issue for green beverages in the food industry. To suppress the discoloration of Chl in aqueous solution, the effects of different emulsifiers were investigated on the discoloration of Chl under ultraviolet (UV) irradiation to determine their potential application for use as food additives. Sucrose fatty acid ester (SE), sorbitan fatty acid ester (TW), and quillaja saponin (QS) were used as emulsifiers, while Triton X-100 (TX) was used for reference. The discoloration of Chl was measured using a color difference meter. The species of Chl in solution were determined using ultraviolet-visible (UV-Vis), fluorescence, and circular dichroism (CD) spectroscopy, and the particle size of Chl in solution was determined using dynamic light scattering. The Chl aggregates were observed by the observation of increased peak areas at longer wavelengths in the UV spectra of Chl, in addition to a reduced fluorescence intensity. The CD spectra showed that the Chl aggregates were arranged in a random structure. Furthermore, the average particle size of the Chl aggregates was determined to be approximately 100 nm. SE and QS were found to significantly enhance the formation of self-aggregates due to their high hydrophilicities compared to those of TW and TX. As a result, SE and QS protect themselves from light to suppress the discoloration of Chl. The present results therefore suggest that SE and QS are suitable emulsifiers to address the problem of Chl discoloration in beverages, such as green tea and vegetable juices. PRACTICAL APPLICATION: Chlorophyll (Chl), a green pigment present in vegetables and green tea, is discolored by light. In this study, it was found that emulsifiers (sucrose fatty acid ester and quillaja saponin) suppress the discoloration of Chl. The implementation of these emulsifiers as food additives would enable green tea or green vegetable juices to maintain their colors for long periods and could contribute significantly to the beverage industry.

Determination of Critical Micelle Concentration from the Diffusion-Driven Dilution of Micellar Aqueous Mixtures

Micellization is a phenomenon of central importance in surfactant solutions. Here, we demonstrate that the diffusion-based spreading of the free boundary between a micellar aqueous solution and pure water yields a one-dimensional spatial profile of surfactant concentration that can be used to identify the critical micelle concentration, here denoted as C*. This can be achieved because dilution of micelles into water leads to their dissociation at a well-defined position along the concentration profile and an abrupt increase in the diffusion coefficient. Rayleigh interferometry was successfully employed to determine C* values for three well-known surfactants in water at 25 °C: Triton X-100 (TX-100), sodium dodecyl sulfate (SDS), and poly(oxyethylene)(4)Lauryl Ether (Brij-30). The dependence of C* on salt concentration was also characterized for TX-100 in the presence of Na₂SO₄, NaCl, and NaSCN. Accurate values of C* can be directly identified by visual inspection of the corresponding concentration-gradient profiles. To apply the method of least squares to experimental concentration profiles, a mathematical expression was derived from Fick's law and the pseudophase separation model of micellization with the inclusion of appropriate modifications. While Rayleigh interferometry was employed in our experiments, this approach can be extended to any experimental technique that yields one-dimensional profiles of surfactant concentration. Moreover, diffusion-driven surfactant disaggregation is precise, noninvasive, requires single-sample preparation, and applies to both nonionic and ionic surfactants. Thus, this work provides the foundation of diffusion-driven dilution methods, thereby representing a valuable addition to existing techniques for the determination of C*.

Recent Advances in EPAC-Targeted Therapies: A Biophysical Perspective

The universal second messenger cAMP regulates diverse intracellular processes by interacting with ubiquitously expressed proteins, such as Protein Kinase A (PKA) and the Exchange Protein directly Activated by cAMP (EPAC). EPAC is implicated in multiple pathologies, thus several EPAC-specific inhibitors have been identified in recent years. However, the mechanisms and molecular interactions underlying the EPAC inhibition elicited by such compounds are still poorly understood. Additionally, being hydrophobic low molecular weight species, EPAC-specific inhibitors are prone to forming colloidal aggregates, which result in non-specific aggregation-based inhibition (ABI) in aqueous systems. Here, we review from a biophysical perspective the molecular basis of the specific and non-specific interactions of two EPAC antagonists-CE3F4R, a non-competitive inhibitor, and ESI-09, a competitive inhibitor of EPAC. Additionally, we discuss the value of common ABI attenuators (e.g., TX and HSA) to reduce false positives at the expense of introducing false negatives when screening aggregation-prone compounds. We hope this review provides the EPAC community effective criteria to evaluate similar compounds, aiding in the optimization of existing drug leads, and informing the development of the next generation of EPAC-specific inhibitors.

Theoretical and experimental study on the effects of pH and surfactant on the internal charge transfer process in distyrylnaphthalene-based conjugated oligoelectrolytes

In this study we have investigated the effects of pH and surfactant on the internal charge transfer (ICT) process in the DSNN derivative, DSNN-NMe⁺₃ (4,4'-bis(4'-(N,N-bis(6″-(N,N,N-trimethylammonium)hexyl)amino)-styryl) naphthalene tetraiodide) with the aim to show that environmentally-induced changes in the degree of ICT process determine the spectral response of the DSNN chromophore. Obtained results showed that DSNN chromophore exhibits evident changes in linear optical properties (absorption/emission wavelengths, quantum yield) upon protonation. These changes are a manifestation of the attenuation of the internal charge transfer processes, which accompanies binding of proton to the nitrogen atoms of the dialkylamino groups at the termini of DSNN chromophore. The results obtained in this study clearly demonstrated the sensitivity of the ICT process in DSNN upon protonation, which, together with the affinity of DSNN towards biological and artificial membranes, may open new perspectives for its utility in fluorescence-based sensing. Moreover, the studied compound showed substantial surfactochromic effects in the ionic and non-ionic surfactant solutions, which indicate the formation of various self-organized DSNN-surfactant aggregates. The structure of these aggregates is determined by the type of specific intermolecular interactions between the chromophore and surfactant molecules. The knowledge of the nature of these interactions may be substantial in the future development of DSNN-based sensing platforms with suitable optical properties.

Mechanisms of Specific versus Nonspecific Interactions of Aggregation-Prone Inhibitors and Attenuators

A common source of false positives in drug discovery is ligand self-association into large colloidal assemblies that nonspecifically inhibit target proteins. However, the mechanisms of aggregation-based inhibition (ABI) and ABI-attenuation by additives, such as Triton X-100 (TX) and human serum albumin (HSA), are not fully understood. Here, we investigate the molecular basis of ABI and ABI-attenuation through the lens of NMR and coupled thermodynamic cycles. We unexpectedly discover a new class of aggregating ligands that exhibit negligible interactions with proteins but act as competitive sinks for the free inhibitor, resulting in bell-shaped dose-response curves. TX attenuates ABI by converting inhibitory, protein-binding aggregates into nonbinding coaggregates, whereas HSA minimizes nonspecific ligand interactions by functioning as a reservoir for free inhibitor and preventing self-association. Hence, both TX and HSA are useful tools to minimize false positives arising from nonspecific binding but at the cost of potentially introducing false negatives due to suppression of specific interactions.

Expression and purification of human phosphatase and actin regulator 1 (PHACTR1) in plant-based systems

Cardiovascular diseases are a prevalent cause of morbidity and mortality especially in industrialized countries. The human phosphatase and actin regulator 1 (PHACTR1) may be involved in such diseases, but its precise regulatory function remains unclear due to the large number of potential interaction partners. The same phenomenon makes this protein difficult to express in mammalian cells, but it is also an intrinsically disordered protein that likely aggregates when expressed in bacteria due to the absence of chaperones. We therefore used a design of experiments approach to test the suitability of three plant-based systems for the expression of satisfactory quantities of recombinant PHACTR1, namely transient expression in tobacco (Nicotiana tabacum) BY-2 plant cell packs (PCPs), whole N. benthamiana leaves and BY-2 cell lysate (BYL). The highest yield was achieved using the BYL: up to 120 mg product kg-1 biomass equivalent within 48 h of translation. This was 1.3-fold higher than transient expression in N. benthamiana together with the silencing inhibitor p19, and 6-fold higher than the PCP system. The presence of Triton X-100 in the extraction buffer increased the recovery of PHACTR1 by 2-200-fold depending on the conditions. PHACTR1 was incompatible with biomass blanching and was stable for less than 16 h in raw plant extracts. Purification using a DDK-tag proved inefficient whereas 15% purity was achieved by immobilized metal affinity chromatography.

Efficient and Selective Bioconjugation Using Surfactants

The surfactant sodium decanote is used in the drug substance process of Besponsa, an antibody drug conjugate (ADC), to facilitate bioconjugation between activated calicheamicin derivative (linker payload) and inotuzumab (monoclonal antibody). Under the normal conjugation process conditions, sodium decanoate forms micelles and the micelle formation was shown to be critical for the efficient conjugation reaction. Further screening studies indicated that sodium dodecyl sulfate, sodium deoxycholate, and dodecyltrimethylammonium bromide were also able to facilitate the conjugation reaction. While the choice of surfactant and its concentration in the reaction impact the conjugation efficiency, the charge of surfactant and the choice of linker payload influence the conjugated lysine site selectivity. Eight major conjugated lysine sites are observed in Besponsa, as compared to approximately 80 conjugated lysine sites typically observed in conventional lysine-based ADCs.

Effect of [Zr(α-PW11O39)2]10− Polyoxometalate on the Self-Assembly of Surfactant Molecules in Water Studied by Fluorescence and DOSY NMR Spectroscopy

The catalytic fragmentation of hydrophobic proteins by polyoxometalates (POMs) requires the presence of surfactants in order to increase the solubility of the protein. Depending on the nature of the surfactant, different effects on the kinetics of protein hydrolysis are observed. As the molecular interactions between the POMs and surfactants in solutions have been scarcely explored, in this study, the interaction between the catalytically active Keggin polyoxometalate [Zr(α-PW11O39)2]10− and four different surfactants—sodium dodecyl sulfate (SDS), dodecyldimethyl(3-sulfopropyl)ammonium (Zw3-12), dodecyldimethyl(3-sulfopropyl) ammonium (CHAPS), and polyethylene glycol tert-octylphenyl ether (TX-100)—have been studied in aqueous media. The effect of polyoxometalate on the self-assembly of surfactant molecules into micelles and on the critical micellar concentration (CMC) has been examined by fluorescence spectroscopy and diffusion ordered NMR spectroscopy (DOSY).

Laser-responsive liposome for selective tumor targeting of nitazoxanide nanoparticles

Nitazoxanide [2-(Acetyloxy)-N-(5-nitro-2-thiazolyl)benzamide], usually referred as NTZ, is an antiparasites drug with a potential anti-cancer reactivity. However, the bioavailability of nitazoxanide is limited due to its poor water solubility. In this study, nitazoxanide could be successfully incorporated in a stable biocompatible liposome (NTZ-LP) using a modified thin film hydration technique. Further, a novel lipophilic phthalocyanine star polymer R₄PcZn was prepared as photosensitizer and in situ incorporated with NTZ in the liposome formulation affording a laser-responsive liposome (NTZ-ZnPc-LP). Both (NTZ-LP) and (NTZ-ZnPc-LP) showed high entrapment efficiency (EE) and high in vitro drug release rates. Transmission electron microscope (TEM) images and dynamic light scattering (DLS) measurements of (NTZ-LP) and (NTZ-ZnPc-LP) showed unilamellar vesicles of mean diameter 192.2 and 87.4nm, respectively. In addition, NTZ nanoparticles (NTZ NPs) were prepared via membrane extrusion method using DMF and water as solvents. All formulations were similarly prepared using radiolabeled nitazoxanide ¹²⁵I-NTZ. After induction of solid tumor in mices using Ehrlich Ascites Carcinoma, the prepared formulations were injected in the tail vein of the mices. Tumor sites of the animal injected with (¹²⁵I-NTZ-ZnPc-LP) were illuminated with a HeNe laser (λ=630nm). Afterwards, the biodistriburtion of ¹²⁵I-NTZ was tagged using γ counter. Results showed that the light-responsive formulation (¹²⁵I-NTZ-ZnPc-LP) affords a higher accumulation of ¹²⁵I NTZ in the tumor sites after illumination. This can be attributed to the rupture of liposome lipid bilayer as a result of the photosensitization process and the singlet oxygen species resulted thereof. Despite (NTZ NPs) formulation showed a rapid accumulation of NTZ in tumor, it showed unfavoured rapid blood clearance rate.

Establishing Structure Property Relationship in Drug Partitioning into and Release from Niosomes: Physical Chemistry Insights with Anti-Inflammatory Drugs

Understanding the physical chemistry underlying interactions of drugs with delivery formulations is extremely important in devising effective drug delivery systems. The partitioning and release kinetics of diclofenac sodium and naproxen from Brij 30 and Triton X-100 niosomal formulations have been addressed based on structural characterization, partitioning energetics, and release kinetics, thus establishing a relationship between structures and observed properties. Both the drugs partition in nonpolar regions of TX-100 niosomes via stacking of aromatic rings. The combined effects of interactions of the drugs with polar head groups and the rigidity of the niosome vesicles determine entry and partitioning of drugs into niosomes. The observed slower rate of release of the drugs from the drug encapsulated niosomes of TX-100 than those of Brij 30, suggest stable complexation of drugs in the nonpolar interior of the former. No release of drugs from the niosomes was observed until 24 h even upon varying pH conditions without SDS. However, SDS in drug loaded niosomes led to release of drugs in as early as 6 h. The sustained pattern of in vitro release kinetics of the drugs thus observed from our niosomal preparations suggest these vesicular systems to be promising for pharamaceutical applications as potential drug delivery vehicles.

C. elegans avoids toxin-producing Streptomyces using a seven transmembrane domain chemosensory receptor

Predators and prey co-evolve, each maximizing their own fitness, but the effects of predator–prey interactions on cellular and molecular machinery are poorly understood. Here, we study this process using the predator Caenorhabditis elegans and the bacterial prey Streptomyces, which have evolved a powerful defense: the production of nematicides. We demonstrate that upon exposure to Streptomyces at their head or tail, nematodes display an escape response that is mediated by bacterially produced cues. Avoidance requires a predicted G-protein-coupled receptor, SRB-6, which is expressed in five types of amphid and phasmid chemosensory neurons. We establish that species of Streptomyces secrete dodecanoic acid, which is sensed by SRB-6. This behavioral adaptation represents an important strategy for the nematode, which utilizes specialized sensory organs and a chemoreceptor that is tuned to recognize the bacteria. These findings provide a window into the molecules and organs used in the coevolutionary arms race between predator and potential prey.

Effect of Four Commonly Used Dissolution Media Surfactants on Pancreatin Proteolytic Activity

Proteolytic enzymes are often used in dissolution testing of cross-linked gelatin capsules that do not conform to the dissolution specification. Their catalytic activity, however, can be affected when they are added to a dissolution media containing solubility enhancers, such as surfactants. The aim of this study was to assess the activity of pancreatic proteases in presence of four commonly used surfactants. We found that pancreatin exhibits remarkable proteolytic activity in the presence of Tween 80, even at the concentrations as high as 250 times its critical micelle concentration (cmc) in water, whereas, Triton X-100 enhanced the proteolytic activity of pancreatin when added at concentrations above its cmc in water. Both surfactants are non-ionic surfactants. On the other hand, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), which are ionic surfactants, have a detrimental effect on the proteolytic activity of pancreatin. For example, a 50% reduction of the pancreatin activity was found in samples which contain a minor amount of SDS (0.05% w/v) in comparison to a surfactant-free reaction. Additionally, no activity was observed for the pancreatin-SDS samples which were incubated for 30 min at 40°C prior to testing. CTAB had an impact on pancreatin activity at concentrations higher than its cmc. Data from this manuscript can be used as a benchmark for optimization of the dissolution procedures that require use of both surfactants and enzymes.

A combination of mutational and computational scanning guides the design of an artificial ligand-binding controlled lipase

Allostery, i.e. the control of enzyme activity by a small molecule at a location distant from the enzyme’s active site, represents a mechanism essential for sustaining life. The rational design of allostery is a non-trivial task but can be achieved by fusion of a sensory domain, which responds to environmental stimuli with a change in its structure. Hereby, the site of domain fusion is difficult to predict. We here explore the possibility to rationally engineer allostery into the naturally not allosterically regulated Bacillus subtilis lipase A, by fusion of the citrate-binding sensor-domain of the CitA sensory-kinase of Klebsiella pneumoniae. The site of domain fusion was rationally determined based on whole-protein site-saturation mutagenesis data, complemented by computational evolutionary-coupling analyses. Functional assays, combined with biochemical and biophysical studies suggest a mechanism for control, similar but distinct to the one of the parent CitA protein, with citrate acting as an indirect modulator of Triton-X100 inhibition of the fusion protein. Our study demonstrates that the introduction of ligand-dependent regulatory control by domain fusion is surprisingly facile, suggesting that the catalytic mechanism of some enzymes may be evolutionary optimized in a way that it can easily be perturbed by small conformational changes.

Destabilization of Oil-in-Water Emulsions Stabilized by Non-ionic Surfactants: Effect of Particle Hydrophilicity

We investigate the use of particle hydrophilicity as a tool for emulsion destabilization in Triton-X-100-stabilized hexadecane-in-water emulsions. The hydrophilicity of the particles added to the aqueous phase was found to have a pronounced effect on the stability of the emulsion. Specifically, the addition of hydrophilic fumed silica particles to the aqueous phase resulted in coarsening of the emulsion droplets, with droplet flocculation observed at higher particle concentrations. On the other hand, when partially hydrophobic fumed silica particles were added to the aqueous phase, coarsening of the emulsion droplets was observed at low particle concentrations and phase separation of oil and water was observed at higher particle concentrations. Surface tension and interfacial tension measurements showed significant depletion of the surfactant from the aqueous phase in the presence of the partially hydrophobic particles. The observed changes in the stability of the emulsion and the depletion of the surfactant can be rationalized in terms of changes in the adsorption behavior of the surfactant molecules, from one dominated by hydrogen bonding on hydrophilic particles to one dominated by hydrophobic interactions on partially hydrophobic particles. Our findings also provide, for the first time, an in-depth understanding of antagonistic (destabilizing) effects in mixtures of partially hydrophobic particles and a non-ionic surfactant (Triton X-100) in water.

Controlled lid-opening in Thermomyces lanuginosus lipase- An engineered switch for studying lipase function

Here, we present a lipase mutant containing a biochemical switch allowing a controlled opening and closing of the lid independent of the environment. The closed form of the TlL mutant shows low binding to hydrophobic surfaces compared to the binding observed after activating the controlled switch inducing lid-opening. We directly show that lipid binding of this mutant is connected to an open lid conformation demonstrating the impact of the exposed amino acid residues and their participation in binding at the water-lipid interface. The switch was created by introducing two cysteine residues into the protein backbone at sites 86 and 255. The crystal structure of the mutant shows the successful formation of a disulfide bond between C86 and C255 which causes strained closure of the lid-domain. Control of enzymatic activity and binding was demonstrated on substrate emulsions and natural lipid layers. The locked form displayed low enzymatic activity (~10%) compared to wild-type. Upon release of the lock, enzymatic activity was fully restored. Only 10% binding to natural lipid substrates was observed for the locked lipase compared to wild-type, but binding was restored upon adding reducing agent. QCM-D measurements revealed a seven-fold increase in binding rate for the unlocked lipase. The TlL_locked mutant shows structural changes across the protein important for understanding the mechanism of lid-opening and closing. Our experimental results reveal sites of interest for future mutagenesis studies aimed at altering the activation mechanism of TlL and create perspectives for generating tunable lipases that activate under controlled conditions.

Fluorophore Absorption Size Exclusion Chromatography (FA-SEC): An Alternative Method for High-Throughput Detergent Screening of Membrane Proteins

Membrane proteins play key roles in many fundamental functions in cells including ATP synthesis, ion and molecule transporter, cell signalling and enzymatic reactions, accounting for ~30% genes of whole genomes. However, the hydrophobic nature of membrane proteins frequently hampers the progress of structure determination. Detergent screening is the critical step in obtaining stable detergent-solubilized membrane proteins and well-diffracting protein crystals. Fluorescence Detection Size Exclusion Chromatography (FSEC) has been developed to monitor the extraction efficiency and monodispersity of membrane proteins in detergent micelles. By tracing the FSEC profiles of GFP-fused membrane proteins, this method significantly enhances the throughput of detergent screening. However, current methods to acquire FSEC profiles require either an in-line fluorescence detector with the SEC equipment or an off-line spectrofluorometer microplate reader. Here, we introduce an alternative method detecting the absorption of GFP (FA-SEC) at 485 nm, thus making this methodology possible on conventional SEC equipment through the in-line absorbance spectrometer. The results demonstrate that absorption is in great correlation with fluorescence of GFP. The comparably weaker absorption signal can be improved by using a longer path-length flow cell. The FA-SEC profiles were congruent with the ones plotted by FSEC, suggesting FA-SEC could be a comparable and economical setup for detergent screening of membrane proteins.

Surfactant-induced assembly of enzymatically-stable peptide hydrogels

The secondary structure of peptides in the presence of interacting additives is an important topic of study, having implications in the application of peptide science to a broad range of modern technologies. Surfactants constitute a class of biologically relevant compounds that are known to influence both peptide conformation and aggregation or assembly. We have characterized the secondary structure of a linear nonapeptide composed of a hydrophobic alanine/phenylalanine core flanked by hydrophilic acid/amine units. We show that the anionic surfactant sodium dodecyl sulfate (SDS) induces the formation of β-sheets and macroscopic gelation in this otherwise unstructured peptide. Through comparison to related additives, we propose that SDS-induced secondary structure formation is the result of amphiphilicity created by electrostatic binding of SDS to the peptide. In addition, we demonstrate a novel utility of surfactants in manipulating and stabilizing peptide nanostructures. SDS is used to simultaneously induce secondary structure in a peptide and to inhibit the activity of a model enzyme, resulting in a peptide hydrogel that is impervious to enzymatic degradation. These results complement our understanding of the behavior of peptides in the presence of interacting secondary molecules and provide new potential pathways for programmable organization of peptides by the addition of such components.