Acellular matrix: a biomaterials approach for coronary artery bypass and heart valve replacement

Current Status of Bioprinting Using Polymer Hydrogels for the Production of Vascular Grafts

Cardiovascular disease is one of the leading causes of death and serious illness in Europe and worldwide. Conventional treatment-replacing the damaged blood vessel with an autologous graft-is not always affordable for the patient, so alternative approaches are being sought. One such approach is patient-specific tissue bioprinting, which allows for precise distribution of cells, material, and biochemical signals. With further developmental support, a functional replacement tissue or vessel can be created. This review provides an overview of the current state of bioprinting for vascular graft manufacturing and summarizes the hydrogels used as bioinks, the material of carriers, and the current methods of fabrication used, especially for vessels smaller than 6 mm, which are the most challenging for cardiovascular replacements. The fabrication methods are divided into several sections-self-supporting grafts based on simple 3D bioprinting and bioprinting of bioinks on scaffolds made of decellularized or nanofibrous material.

Challenges and Strategies for Endothelializing Decellularized Small-Diameter Tissue-Engineered Vessel Grafts

Vascular diseases are the leading cause of ischemic necrosis in tissues and organs, necessitating using vascular grafts to restore blood supply. Currently, small vessels for coronary artery bypass grafts are unavailable in clinical settings. Decellularized small-diameter tissue-engineered vessel grafts (SD-TEVGs) hold significant potential. However, they face challenges, as simple implantation of decellularized SD-TEVGs in animals leads to thrombosis and calcification due to incomplete endothelialization. Consequently, research and development focus has shifted toward enhancing the endothelialization process of decellularized SD-TEVGs. This paper reviews preclinical studies involving decellularized SD-TEVGs, highlighting different strategies and their advantages and disadvantages for achieving rapid endothelialization of these vascular grafts. Methods are analyzed to improve the process while addressing potential shortcomings. This paper aims to contribute to the future commercial viability of decellularized SD-TEVGs.

Decellularization of Articular Cartilage: A Hydrochloric Acid-Based Strategy

Removing cellular material from a tissue, a process called decellularization, reduces the risk of adverse host reactions, allows for efficient decontamination, and extends the shelf-life of the matrix. It facilitates the use of cartilage tissue as human-derived allograft, thus providing the field of cartilage regeneration with a biomaterial unmatched in its similarity to native cartilage in terms of structure, composition, and mechanical properties.The dense extracellular matrix of articular cartilage requires a particularly thorough process to achieve the removal of cells, cell debris, and reagents used in the process. In our studies (Nürnberger et al., EBioMedicine 64:103196, 2021; Schneider et al., Tissue Eng Part C Methods 22(12):1095-1107, 2016), we have successfully developed a protocol for achieving decellularization via physical, chemical, and enzymatic steps. Combining freeze-thaw cycles for devitalization, hydrochloric acid as decellularization agent and the enzymatic removal of glycosaminoglycans, results in an acellular scaffold that is fully biocompatible and promotes cellular attachment. The structure and sophisticated architecture of collagen type II is left intact.This chapter provides a comprehensive guide to the steps and reagents needed to decellularize articular cartilage. In addition to the standard decell-deGAG protocol, a fast option is given which is suitable for thin specimen. Histological evaluation is presented to illustrate treatment success.

Can Heart Valve Decellularization Be Standardized? A Review of the Parameters Used for the Quality Control of Decellularization Processes

When a tissue or an organ is considered, the attention inevitably falls on the complex and delicate mechanisms regulating the correct interaction of billions of cells that populate it. However, the most critical component for the functionality of specific tissue or organ is not the cell, but the cell-secreted three-dimensional structure known as the extracellular matrix (ECM). Without the presence of an adequate ECM, there would be no optimal support and stimuli for the cellular component to replicate, communicate and interact properly, thus compromising cell dynamics and behaviour and contributing to the loss of tissue-specific cellular phenotype and functions. The limitations of the current bioprosthetic implantable medical devices have led researchers to explore tissue engineering constructs, predominantly using animal tissues as a potentially unlimited source of materials. The high homology of the protein sequences that compose the mammalian ECM, can be exploited to convert a soft animal tissue into a human autologous functional and long-lasting prosthesis ensuring the viability of the cells and maintaining the proper biomechanical function. Decellularization has been shown to be a highly promising technique to generate tissue-specific ECM-derived products for multiple applications, although it might comprise very complex processes that involve the simultaneous use of chemical, biochemical, physical and enzymatic protocols. Several different approaches have been reported in the literature for the treatment of bone, cartilage, adipose, dermal, neural and cardiovascular tissues, as well as skeletal muscle, tendons and gastrointestinal tract matrices. However, most of these reports refer to experimental data. This paper reviews the most common and latest decellularization approaches that have been adopted in cardiovascular tissue engineering. The efficacy of cells removal was specifically reviewed and discussed, together with the parameters that could be used as quality control markers for the evaluation of the effectiveness of decellularization and tissue biocompatibility. The purpose was to provide a panel of parameters that can be shared and taken into consideration by the scientific community to achieve more efficient, comparable, and reliable experimental research results and a faster technology transfer to the market.

Pulmonary valve tissue engineering strategies in large animal models

In the last 25 years, numerous tissue engineered heart valve (TEHV) strategies have been studied in large animal models. To evaluate, qualify and summarize all available publications, we conducted a systematic review and meta-analysis. We identified 80 reports that studied TEHVs of synthetic or natural scaffolds in pulmonary position (n = 693 animals). We identified substantial heterogeneity in study designs, methods and outcomes. Most importantly, the quality assessment showed poor reporting in randomization and blinding strategies. Meta-analysis showed no differences in mortality and rate of valve regurgitation between different scaffolds or strategies. However, it revealed a higher transvalvular pressure gradient in synthetic scaffolds (11.6 mmHg; 95% CI, [7.31-15.89]) compared to natural scaffolds (4,67 mmHg; 95% CI, [3,94-5.39]; p = 0.003). These results should be interpreted with caution due to lack of a standardized control group, substantial study heterogeneity, and relatively low number of comparable studies in subgroup analyses. Based on this review, the most adequate scaffold model is still undefined. This review endorses that, to move the TEHV field forward and enable reliable comparisons, it is essential to define standardized methods and ways of reporting. This would greatly enhance the value of individual large animal studies.

Long-Term Stability and Biocompatibility of Pericardial Bioprosthetic Heart Valves

The use of bioprostheses for heart valve therapy has gradually evolved over several decades and both surgical and transcatheter devices are now highly successful. The rapid expansion of the transcatheter concept has clearly placed a significant onus on the need for improved production methods, particularly the pre-treatment of bovine pericardium. Two of the difficulties associated with the biocompatibility of bioprosthetic valves are the possibilities of immune responses and calcification, which have led to either catastrophic failure or slow dystrophic changes. These have been addressed by evolutionary trends in cross-linking and decellularization techniques and, over the last two decades, the improvements have resulted in somewhat greater durability. However, as the need to consider the use of bioprosthetic valves in younger patients has become an important clinical and sociological issue, the requirement for even greater longevity and safety is now paramount. This is especially true with respect to potential therapies for young people who are afflicted by rheumatic heart disease, mostly in low- to middle-income countries, for whom no clinically acceptable and cost-effective treatments currently exist. To extend longevity to this new level, it has been necessary to evaluate the mechanisms of pericardium biocompatibility, with special emphasis on the interplay between cross-linking, decellularization and anti-immunogenicity processes. These mechanisms are reviewed in this paper. On the basis of a better understanding of these mechanisms, a few alternative treatment protocols have been developed in the last few years. The most promising protocol here is based on a carefully designed combination of phases of tissue-protective decellularization with a finely-titrated cross-linking sequence. Such refined protocols offer considerable potential in the progress toward superior longevity of pericardial heart valves and introduce a scientific dimension beyond the largely disappointing 'anti-calcification' treatments of past decades.

In vitro evaluation of surface biological properties of decellularized aorta for cardiovascular use

The aim of this study was to determine an in vitro evaluation method that could directly predict in vivo performance of decellularized tissue for cardiovascular use. We hypothesized that key factors for in vitro evaluation would be found by in vitro assessment of decellularized aortas that previously showed good performance in vivo, such as high patency. We chose porcine aortas, decellularized using three different decellularization methods: sodium dodecyl-sulfate (SDS), freeze-thawing, and high-hydrostatic pressurization (HHP). Immunohistological staining, a blood clotting test, scanning electron microscopy (SEM) analysis, and recellularization of endothelial cells were used for the in vitro evaluation. There was a significant difference in the remaining extracellular matrix (ECM) components, ECM structure, and the luminal surface structure between the three decellularized aortas, respectively, resulting in differences in the recellularization of endothelial cells. On the other hand, there was no difference observed in the blood clotting test. These results suggested that the blood clotting test could be a key evaluation method for the prediction of in vivo performance. In addition, evaluation of the luminal surface structure and the recellularization experiment should be packaged as an in vitro evaluation because the long-term patency was probably affected. The evaluation approach in this study may be useful to establish regulations and a quality management system for a cardiovascular prosthesis.

Processing of collagen based biomaterials and the resulting materials properties

Collagen, the most abundant extracellular matrix protein in animal kingdom belongs to a family of fibrous proteins, which transfer load in tissues and which provide a highly biocompatible environment for cells. This high biocompatibility makes collagen a perfect biomaterial for implantable medical products and scaffolds for in vitro testing systems. To manufacture collagen based solutions, porous sponges, membranes and threads for surgical and dental purposes or cell culture matrices, collagen rich tissues as skin and tendon of mammals are intensively processed by physical and chemical means. Other tissues such as pericardium and intestine are more gently decellularized while maintaining their complex collagenous architectures. Tissue processing technologies are organized as a series of steps, which are combined in different ways to manufacture structurally versatile materials with varying properties in strength, stability against temperature and enzymatic degradation and cellular response. Complex structures are achieved by combined technologies. Different drying techniques are performed with sterilisation steps and the preparation of porous structures simultaneously. Chemical crosslinking is combined with casting steps as spinning, moulding or additive manufacturing techniques. Important progress is expected by using collagen based bio-inks, which can be formed into 3D structures and combined with live cells. This review will give an overview of the technological principles of processing collagen rich tissues down to collagen hydrolysates and the methods to rebuild differently shaped products. The effects of the processing steps on the final materials properties are discussed especially with regard to the thermal and the physical properties and the susceptibility to enzymatic degradation. These properties are key features for biological and clinical application, handling and metabolization.

Biomaterial characterization of off-the-shelf decellularized porcine pericardial tissue for use in prosthetic valvular applications

Fixed pericardial tissue is commonly used for commercially available xenograft valve implants, and has proven durability, but lacks the capability to remodel and grow. Decellularized porcine pericardial tissue has the promise to outperform fixed tissue and remodel, but the decellularization process has been shown to damage the collagen structure and reduce mechanical integrity of the tissue. Therefore, a comparison of uniaxial tensile properties was performed on decellularized, decellularized-sterilized, fixed, and native porcine pericardial tissue versus native valve leaflet cusps. The results of non-parametric analysis showed statistically significant differences (p < .05) between the stiffness of decellularized versus native pericardium and native cusps as well as fixed tissue, respectively; however, decellularized tissue showed large increases in elastic properties. Porosity testing of the tissues showed no statistical difference between decellularized and decell-sterilized tissue compared with native cusps (p > .05). Scanning electron microscopy confirmed that valvular endothelial and interstitial cells colonized the decellularized pericardial surface when seeded and grown for 30 days in static culture. Collagen assays and transmission electron microscopy analysis showed limited reductions in collagen with processing; yet glycosaminoglycan assays showed great reductions in the processed pericardium relative to native cusps. Decellularized pericardium had comparatively low mechanical properties among the groups studied; yet the stiffness was comparatively similar to the native cusps and demonstrated a lack of cytotoxicity. Suture retention, accelerated wear, and hydrodynamic testing of prototype decellularized and decell-sterilized valves showed positive functionality. Sterilized tissue could mimic valvular mechanical environment in vitro, therefore making it a viable potential candidate for off-the-shelf tissue-engineered valvular applications.

The Heart and Great Vessels

Cardiovascular disease is the leading cause of mortality worldwide. We have made large strides over the past few decades in management, but definitive therapeutic options to address this health-care burden are still limited. Given the ever-increasing need, much effort has been spent creating engineered tissue to replaced diseased tissue. This article gives a general overview of this work as it pertains to the development of great vessels, myocardium, and heart valves. In each area, we focus on currently studied methods, limitations, and areas for future study.

Antigen Clearing from Porcine Heart Valves with Preservation of Structural Integrity

Bioprostheses currently used for replacement of diseased cardiovascular tissue are preserved and partially protected from immune rejection through chemical fixation. However, after implantation, chemically preserved (fixed) material has limited durability and lacks the ability to revitalize through cellular ingrowth and remodeling. As an alternative to fixation, we aimed at thoroughly removing antigens from tissue, leaving an intact scaffold, suitable for integration and revitalization in the host. Extensive washing of porcine heart valves with a mixture of two detergents (SDS and Triton X-100) yielded an intact matrix devoid of cells and depleted of soluble proteins that was minimally immunogenic in rabbits. A detailed characterization of the biomechanics and durability of the tissue is under way. If the lack of immunogenicity is confirmed in primates, our results would suggest that a detergent-washed, unfixed porcine heart valve can be an attractive non-inflammatory scaffold for heart valve regeneration in humans.

Systematic Comparison of Protocols for the Preparation of Human Articular Cartilage for Use as Scaffold Material in Cartilage Tissue Engineering

Natural extracellular matrix-derived biomaterials from decellularized allogenic tissues are of increasing interest for tissue engineering because their structure and composition provide a complexity that is not achievable with current manufacturing techniques. The prerequisite to bring allogenic tissue from bench to bedside as a functional biomaterial is the full removal of cells while preserving most of its native characteristics such as structure and composition. The exceptionally dense structure of articular cartilage, however, poses a special challenge for decellularization, scaffold preparation, and reseeding. Therefore, we tested 24 different protocols aiming to remove cells and glycosaminoglycans (GAG) while preserving the collagen backbone and ultrastructure. The resulting matrices were analyzed for cell removal (DNA quantification, haematoxylin and eosin staining), GAG content (dimethyl methylene blue assay, Alcian blue staining and micro-computed tomography), collagen integrity (immunohistochemistry and ultrastructure), and biomechanics (compression test). Furthermore, seeding tests were conducted to evaluate cell viability and attachment to the scaffolds. Sodium dodecyl sulfate-based protocols yielded satisfactory reduction of DNA content, yet had negative effects on cell viability and attachment. Hydrochloric acid efficiently decellularized the scaffold and pepsin emerged as best option for GAG depletion. Combining these two reagents led to our final protocol, most efficient in DNA and GAG depletion while preserving the collagen architecture. The compressive modulus decreased in the absence of GAG to ∼1/3 of native cartilage, which is significantly higher than that by commercially available scaffolds tested as a reference (ranging from 1/25 to 1/100 of native cartilage). Cytocompatibility tests showed that human adipose-derived stromal cells readily adhered to the scaffold. In this study, we established a protocol combining freeze-thaw cycles, osmotic shock, and treatment with hydrochloric acid followed by a pepsin digestion step, achieving successful decellularization and GAG depletion within 1 week, resulting in a cytocompatible material with intact collagen structure. The protocol provides a basis for the generation of allogeneic scaffolds, potentially substituting manufactured scaffolds currently used in clinical articular cartilage treatment.

Different approaches to heart valve decellularization: A comprehensive overview of the past 30 years

Xenogeneic decellularized heart valve scaffolds have the potential to overcome the limitations of existing bioprosthetic heart valves that have limited duration due to calcification and tissue degeneration phenomena. This article presents a review of 30 years of decellularization approaches adopted in cardiovascular tissue engineering, with a focus on the use, either individually or in combination, of different detergents. The safety and efficacy of cell-removal procedures are specifically reported and discussed, as well as the structure and biomechanics of the treated extracellular matrix (ECM). Detergent residues within the ECM, production of hyaluronan fragments, safe removal of cellular debris, and the persistence of the alpha-Gal epitope after the decellularization treatments are of particular interest as parameters for the identification of the best tissue for the manufacture of bioprostheses. Special attention has also been given to key factors that should be considered in the manufacture of the next generation of xenogeneic bioprostheses, where tissues must retain the ability to be remodeled and to grow in weight along with body reshaping.

Globular chitosan treatment of bovine jugular veins: evidence of anticalcification efficacy in the subcutaneous rat model

Vascular xenografts are widely used in cardiovascular surgery as an alternative to autologous vessels and vascular allografts. Calcification is one of the main drawbacks of vascular grafts, especially among young patients and children. Among different anticalcification approaches, chitosan emerges as a highly promising candidate due to its versatility, natural origin, and biocompatibility. We investigated the anticalcification efficacy of globular chitosan ("Chitozol") as it demonstrated the improved rate of water solubility as compared with conventional linear macromolecules of chitosan. In addition, we supposed that compact globular form of "Chitozol" molecules could provide effective penetration of extracellular matrix of bovine jugular veins (BJVs). Our results revealed that "Chitozol" treatment mitigated calcification in the experimental groups as compared to the control groups (without any treatment, conventional treatment with glutaraldehyde, and commercially available Contegra conduit). Different concentrations of "Chitozol" (0.3% and 3%), as well as different incubation times (15 and 30min), were equally effective in the prevention of calcification. In addition, "Chitozol" treatment with decellularization of BJVs demonstrated slightly improved stress-strain properties of unimplanted samples. Thus, the filling of fresh BJV with globular chitosan is proposed as a promising emerging treatment for the mitigation of calcific degeneration in BJVs xenografts.

Decellularized Native and Engineered Arterial Scaffolds for Transplantation

More than 570,000 coronary artery bypass grafts are implanted each year, creating an important demand for small-diameter vascular grafts. For patients who lack adequate internal mammary artery or saphenous vein, tissue-engineered arteries may prove useful. However, the time needed to tissue engineer arteries (7 weeks or more) is too long for many patients. Decellularized cadaveric human arteries are another possible source of vascular conduit, but limited availability and the potential for disease transmission limit their widespread use. In contrast, decellularized tissue-engineered arteries could serve as grafts for immediate implantation, as scaffolds onto which patients' cells could be seeded, or as carriers for genetically engineered cells to aid cell transplantation. The goal of this study was to quantify the effects of decellularization on vascular matrix and mechanical properties. Specifically, we compared cellular elimination, extracellular matrix retention, and mechanical characteristics of porcine carotid arteries before and after treatment with three decellularization methods. In addition, for the first time, tissue-engineered arteries were decellularized. Decellularized native arteries were also used as a scaffold onto which vascular cells were seeded. These studies identified a decellularization method for native and engineered arteries that maximized cellular elimination, without greatly compromising mechanical integrity. We showed that engineered tissues could be decellularized, and demonstrated the feasibility of reseeding decellularized vessels with vascular cells.

Future Prospects for Scaffolding Methods and Biomaterials in Skin Tissue Engineering: A Review

Over centuries, the field of regenerative skin tissue engineering has had several advancements to facilitate faster wound healing and thereby restoration of skin. Skin tissue regeneration is mainly based on the use of suitable scaffold matrices. There are several scaffold types, such as porous, fibrous, microsphere, hydrogel, composite and acellular, etc., with discrete advantages and disadvantages. These scaffolds are either made up of highly biocompatible natural biomaterials, such as collagen, chitosan, etc., or synthetic materials, such as polycaprolactone (PCL), and poly-ethylene-glycol (PEG), etc. Composite scaffolds, which are a combination of natural or synthetic biomaterials, are highly biocompatible with improved tensile strength for effective skin tissue regeneration. Appropriate knowledge of the properties, advantages and disadvantages of various biomaterials and scaffolds will accelerate the production of suitable scaffolds for skin tissue regeneration applications. At the same time, emphasis on some of the leading challenges in the field of skin tissue engineering, such as cell interaction with scaffolds, faster cellular proliferation/differentiation, and vascularization of engineered tissues, is inevitable. In this review, we discuss various types of scaffolding approaches and biomaterials used in the field of skin tissue engineering and more importantly their future prospects in skin tissue regeneration efforts.

Inadequate Processing of Decellularized Dermal Matrix Reduces Cell Viability In Vitro and Increases Apoptosis and Acute Inflammation In Vivo

Decellularized tissue scaffolds are commonly used in the clinic because they can be used as substitutes for more traditional biomaterials, while imparting additional physiological effects. Nevertheless, reports of complications associated with their use are widespread and poorly understood. This study probes possible causes of these complications by examining cell viability and apoptosis in response to eluents from decellularized dermis. Using multiple sources of decellularized dermis, this study shows that typical decellularized scaffolds (prepared with commonly used laboratory techniques, as well as purchased from commercial sources) contain soluble components that are cytotoxic and that these components can be removed by extensive washes in cell culture media. In addition, this study demonstrates that these observed in vitro phenotypes correlate with increased apoptosis and acute inflammation when implanted subcutaneously in mice.

A novel technique for simultaneous whole-body and multi-organ decellularization: umbilical artery catheterization as a perfusion-based method in a sheep foetus model

The aim of this study was to develop a method to generate multi-organ acellular matrices. Using a foetal sheep model have developed a method of systemic pulsatile perfusion via the umbilical artery which allows for simultaneous multi-organ decellularization. Twenty sheep foetuses were systemically perfused with Triton X-100 and sodium dodecyl sulphate. Following completion of the whole-body decellularization, multiple biopsy samples were taken from different parts of 21 organs to ascertain complete cell component removal in the preserved extracellular matrices. Both the natural and decellularized organs were subjected to several examinations. The samples were obtained from the skin, eye, ear, nose, throat, cardiovascular, respiratory, gastrointestinal, urinary, musculoskeletal, central nervous and peripheral nervous systems. The histological results depicted well-preserved extracellular matrix (ECM) integrity and intact vascular structures, without any evidence of residual cellular materials, in all decellularized bioscaffolds. Scanning electron microscope (SEM) and biochemical properties remained intact, similar to their age-matched native counterparts. Preservation of the collagen structure was evaluated by a hydroxyproline assay. Dense organs such as bone and muscle were also completely decellularized, with a preserved ECM structure. Thus, as shown in this study, several organs and different tissues were decellularized using a perfusion-based method, which has not been previously accomplished. Given the technical challenges that exist for the efficient generation of biological scaffolds, the current results may pave the way for obtaining a variety of decellularized scaffolds from a single donor. In this study, there have been unique responses to the single acellularization protocol in foetuses, which may reflect the homogeneity of tissues and organs in the developing foetal body.

Current Progress in Anticalcif ication for Bioprosthetic and Polymeric Heart Valves

The use of bioprosthetic valves fabricated from fixed heterograft tissue (porcine aortic valves or bovine pericardium) in heart valve replacement surgery is limited because of calcification-related failures. The mechanism of calcification of bioprosthetic valves is quite complex and has a variety of determinants, including host factors, tissue fixation conditions, and mechanical effects. Currently, there is no effective therapy to prevent calcification in clinical settings. This article reviews a variety of anticalcification strategies that are under investigation either in advanced animal models or in clinical trials. Bisphosphonates, such as ethan hydroxybisphosphonate (EHBP), inhibit calcium phosphate crystal formation. However, because of their systemic toxicity, they are used as either tissue treatments or polymeric site-specific delivery systems. Detergent treatment, such as sodium dodecyl sulfate (SDS), extracts almost all phospholipids from bioprosthetic heart valve cuspal tissue. Procedures, such as amino oleic acid pretreatment, inhibit calcium uptake. Polyurethane trileaflet valves, investigated as alternatives to bioprosthetic or mechanical valve prostheses, undergo intrinsic and thrombus-related calcification and degradation. Calcification- and thrombus-resistant polyurethanes synthesized in our laboratory by covalent linking of EHBP or heparin (either in bulk or on surface) by unique polyepoxidation chemistry are attractive candidates for further research. Tissue-engineered heart valves may have an important place in the future.

Invivo biocompatibility determination of acellular aortic matrix of buffalo origin

In the present study, biocompatibility of native, acellular, 1,4-butanediol diglycidylether and 1-ethyl-3-(3-dimethyl aminopropyl carbodiimide (EDC) cross-linked acellular aortic grafts was evaluated following subcutaneous implantation in guinea pigs. Biocompatibility was evaluated based on macroscopic, histopathological observations and immune responses elicited by the implanted grafts. Results showed that macroscopically, no abnormal cellular reaction was observed at the host-graft junction in any of the implanted animals. Histopathological observations revealed that the inflammatory response was mild during first 15 days post-implantation and increased at 30 days post-implantation in acellular and cross-linked tissues. By day 60, marked ingrowth of host tissue was observed in EDC cross-linked acellular aortic grafts. ELISA and lymphocyte proliferation assay revealed that animals implanted with EDC grafts showed least immune response when compared to others. Therefore, it was concluded that EDC cross-linked acellular aortic grafts were more compatible and had better handling qualities than the other cross-linked grafts.

Development and characterization of acellular porcine pulmonary valve scaffolds for tissue engineering

Currently available replacement heart valves all have limitations. This study aimed to produce and characterize an acellular, biocompatible porcine pulmonary root conduit for reconstruction of the right ventricular outflow tract e.g., during Ross procedure. A process for the decellularization of porcine pulmonary roots was developed incorporating trypsin treatment of the adventitial surface of the scraped pulmonary artery and sequential treatment with hypotonic Tris buffer (HTB; 10 mM Tris pH 8.0, 0.1% (w/v) EDTA, and 10 KIU aprotinin), 0.1% (w/v) sodium dodecyl sulfate in HTB, two cycles of DNase and RNase, and sterilization with 0.1% (v/v) peracetic acid. Histology confirmed an absence of cells and retention of the gross histoarchitecture. Immunohistochemistry further confirmed cell removal and partial retention of the extracellular matrix, but a loss of collagen type IV. DNA levels were reduced by more than 96% throughout all regions of the acellular tissue and no functional genes were detected using polymerase chain reaction. Total collagen levels were retained but there was a significant loss of glycosaminoglycans following decellularization. The biomechanical, hydrodynamic, and leaflet kinematics properties were minimally affected by the process. Both immunohistochemical labeling and antibody absorption assay confirmed a lack of α-gal epitopes in the acellular porcine pulmonary roots and in vitro biocompatibility studies indicated that acellular leaflets and pulmonary arteries were not cytotoxic. Overall the acellular porcine pulmonary roots have excellent potential for development of a tissue substitute for right ventricular outflow tract reconstruction e.g., during the Ross procedure.

Interaction of cells with decellularized biological materials

The idea to create the concept of cardiovascular "tissue engineering" is based on the recognition that until then all known allogeneic/xenogeneic biological or alloplastic implant materials were associated with shortcomings, which led to graft deterioration, degradation and finally destruction. Thus, it aims to develop viable cardiovascular structures, e.g. heart valves, myocardium or blood vessels, which ideally demonstrate mechanisms of remodeling and self-repair, a high microbiological resistance, complete immunological integrity and a functional endothelial cell layer to guarantee physiological hemostasis. In our current review we aim to identify basic limitations of previous concepts, explain why the use of decellularized matrices was a logical consequence and which limitations still exist.

Tissue engineering and regenerative repair in wound healing

Wound healing is a highly evolved defense mechanism against infection and further injury. It is a complex process involving multiple cell types and biological pathways. Mammalian adult cutaneous wound healing is mediated by a fibroproliferative response leading to scar formation. In contrast, early to mid-gestational fetal cutaneous wound healing is more akin to regeneration and occurs without scar formation. This early observation has led to extensive research seeking to unlock the mechanism underlying fetal scarless regenerative repair. Building upon recent advances in biomaterials and stem cell applications, tissue engineering approaches are working towards a recapitulation of this phenomenon. In this review, we describe the elements that distinguish fetal scarless and adult scarring wound healing, and discuss current trends in tissue engineering aimed at achieving scarless tissue regeneration.

Activity of MMP-9 after repair of abdominal wall defects with acellular and crosslinked bovine pericardium in rabbit

This study was undertaken for the identification of matrix metalloproteinases (MMPs) in extracts obtained from native, acellular and crosslinked bovine pericardium (in vitro), as well as in the plasma after implantation of these biomaterials in rabbits (in vivo). Native pericardium (NP) expressed a 72 kDa (MMP-2) band; whereas, in acellular pericardium (AP) two bands (10 kDa and 92 kDa) of MMPs were observed of which, 92 kDa band was very faint. AP crosslinked with glutaraldehyde did not show any gelatinase activity and thus reflects the creation of new additional chemical bonds between the collagen molecules which has been effectively removed. Gelatin zymography showed only one major band of 92 kDa in all the implanted and untreated rabbit plasma, but the relative amount of 92 kDa was 1-2 times higher in acellular bovine pericardium implanted rabbits as compared to crosslinked and native groups. In NP group, the 92 kDa band was the dullest among the three groups. This indicated that the level of MMP-9 corresponds to the degree of collagen degradation.

Recellularization of well-preserved acellular kidney scaffold using embryonic stem cells

For chronic kidney diseases, there is little chance that the vast majority of world's population will have access to renal replacement therapy with dialysis or transplantation. Tissue engineering would help to address this shortcoming by regeneration of damaged kidney using naturally occurring scaffolds seeded with precursor renal cells. The aims of the present study were to optimize the production of three-dimensional (3D) rat whole-kidney scaffolds by shortening the duration of organ decellularization process using detergents that avoid nonionic compounds, to investigate integrity of extracellular matrix (ECM) structure and to enhance the efficacy of scaffold cellularization using physiological perfusion method. Intact rat kidneys were successfully decellularized after 17 h perfusion with sodium dodecyl sulfate. The whole-kidney scaffolds preserved the 3D architecture of blood vessels, glomeruli, and tubuli as shown by transmission and scanning electron microscopy. Micro-computerized tomography (micro-CT) scan confirmed integrity, patency, and connection of the vascular network. Collagen IV, laminin, and fibronectin staining of decellularized scaffolds were similar to those of native kidney tissues. After infusion of whole-kidney scaffolds with murine embryonic stem (mES) cells through the renal artery, and pressure-controlled perfusion with recirculating cell medium for 24 and 72 h, seeded cells were almost completely retained into the organ and uniformly distributed in the vascular network and glomerular capillaries without major signs of apoptosis. Occasionally, mES cells reached peritubular capillary and tubular compartment. We observed the loss of cell pluripotency and the start of differentiation toward meso-endodermal lineage. Our findings indicate that, with the proposed optimized protocol, rat kidneys can be efficiently decellularized to produce renal ECM scaffolds in a relatively short time, and rapid recellularization of vascular structures and glomeruli. This experimental setup may open the possibility to obtain differentiation of stem cells with long lasting in vitro perfusion.

Autologous skin reconstruction by combining epidermis and acellular dermal matrix tissue derived from the skin of giant congenital melanocytic nevi

Giant congenital melanocytic nevi (GCMN) are defined as nevi greater than 20 cm in diameter. It is difficult to completely remove GCMN because of the lack of available skin grafts for covering the resultant defects. This study examined whether it is possible to produce reconstructed skin by combining epidermal and acellular dermal matrix (ADM) tissue derived from excised GCMN. GCMN skin samples were obtained with the informed consent of volunteer patients. The abilities of hypertonic saline (1 N NaCl), 0.05% trypsin, 0.1% SDS (sodium dodecyl sulfate), and phosphate buffered saline (PBS) to decellularize GCMN tissue were compared. The specimens were incubated in one of the test solutions at 37 °C for 48 h, before being washed with PBS at 4 °C for 14 days. Residual nuclei, residual DNA, nevus tissue viability, and the structural integrity of the basement membrane and capillaries were evaluated before treatment, and after 48 h' treatment with or without 7 or 14 days' washing. We tried to produce reconstructed skin by combining the resultant ADM with enzymatically separated GCMN epidermal tissue. The histological structure of the reconstructed skin was examined after it had been cultured for 5 days. In the SDS group, most cells had been removed after 48 h, and the DNA content of the ADM was significantly lower than in the other groups. As for viability, no significant difference was detected among the groups. The basement membrane and capillaries remained intact in all groups. After 5 days' culturing, the epidermis had become attached to the ADM in all groups, except the SDS group. SDS displayed a superior decellularization ability compared with the other methods; however, it cannot be used to produce reconstructed skin because of its toxicity. In conclusion, we produced reconstructed skin that was devoid of nevus cells by combining GCMN epidermal tissue with GCMN-derived ADM produced with NaCl or trypsin. This is a promising treatment strategy for giant nevus.

Decellularized porcine saphenous artery for small-diameter tissue-engineered conduit graft

Decellularized xenografts have been identified as potential scaffolds for small-diameter vascular substitutes. This study aimed to develop and investigate a biomechanically functional and biocompatible acellular conduit using decellularized porcine saphenous arteries (DPSAs), through a modified decellularization process using Triton X-100/NH4 OH solution and serum-containing medium. Histological and biochemical analysis indicated a high degree of cellular removal and preservation of the extracellular matrix. Bursting pressure tests showed that the DPSAs could withstand a pressure of 1854 ± 164 mm Hg. Assessment of in vitro cell adhesion and biocompatibility showed that porcine pulmonary artery endothelial cells were able to adhere and proliferate on DPSAs in static and rotational culture. After interposition into rabbit carotid arteries in vivo, DPSAs showed patency rates of 60% at 1 month and 50% at 3 months. No aneurysm and intimal hyperplasia were observed in any DPSAs. All patent grafts showed regeneration of vascular elements, and thrombotic occlusion was found to be the main cause of graft failure, probably due to remaining xenoantigens. In conclusion, this study showed the development and evaluation of a decellularization process with the potential to be used as small-diameter grafts.

Interactions of bone marrow stromal cells with native and RGD surface modified acellular bone matrix: a biocompatibility study

Acellular bone matrix (ACM) is a promising biodegradable material scaffold. However, poor cell attachment properties of ACM limit its application. This study investigated the biocompatibility of mesenchymal stem cells (MSCs) and native or surface modified ACM (RGD-ACM) scaffolds in the construction of tissue-engineered bone. Wistar rat bone marrow-derived MSCs were isolated by density gradient centrifugation for in vitro culture. MSCs were seeded on ACM with or without surface modification by RGD peptides to generate tissue-engineered bone for in vitro culture. Significantly higher adhesion of MSCs to RGD-ACM was observed compared with the native material. Detection of active alkaline phosphatase (ALP) indicated intercalation of this protein into the scaffold enhanced cell proliferation. Complete distribution and adhesion of MSCs to the surface of the scaffold was observed by scanning electron microscope. ACM with surface modification by RGD peptides improved the seeding adhesion rates and facilitated the growth efficiency of tissue-engineered bone.

Mechanical evaluation of decellularized porcine thoracic aorta

BACKGROUND

Decellularized tissues are expected to have major cellular immunogenic components removed and in the meantime maintain similar mechanical strength and extracellular matrix (ECM) structure. However, the decellularization processes likely cause alterations of the ECM structure and thus influence the mechanical properties. In the present study, the effects of different decellularization protocols on the (passive) mechanical properties of the resulted porcine aortic ECM were evaluated.

METHODS

Decellularization methods using anionic detergent (sodium dodecyl sulfate), enzymatic detergent (Trypsin), and non-ionic detergent [tert-octylphenylpolyoxyethylen (Triton X-100)] were adopted to obtain decellularized porcine aortic ECM. Histologic studies and scanning electron microscopy were performed to confirm the removal of cells and to examine the structure of ECM. Biaxial tensile testing was used to characterize both the elastic and viscoelastic mechanical behaviors of decellularized ECM.

RESULTS

All three decellularization protocols remove the cells effectively. The major ECM structure is preserved under sodium dodecyle sulfate (SDS) and Triton X-100 treatments. However, the structure of Trypsin treated ECM is severely disrupted. SDS and Triton X-100 decellularized ECM exhibits similar elastic properties as intact aorta tissues. Decellularized ECM shows less stress relaxation than intact aorta due to the removal of cells. Creep behavior is negligible for both decellularized ECM and intact aortas.

CONCLUSION

SDS and Triton X-100 decellularized ECM tissue appeared to maintain the critical mechanical and structural properties and might work as a potential material for further vascular tissue engineering.

Platelet gel supernatant as a potential tool to repopulate acellular heart valves

OBJECTIVE

The aim of this study was to repopulate decellularized heart valve matrices with ovine mesenchymal stem cells (oMSCs) by the use of platelet gel (PG) supernatant, a storage vehicle for growth factors.

METHODS

oMSCs were exposed to different concentrations of PG-released supernatant and cell proliferation was evaluated using the MTS assay. oMSC motility and invasiveness were assayed using a Boyden chamber. A quantitative sandwich enzyme immunoassay was used to examine amounts of bFGF and TGF-β1 in the PG supernatant. Repopulation of acellular heart valve matrices was stimulated by seeding matrices with oMSCs supplemented with the PG supernatant.

RESULTS

The most significant increase in proliferation induced by PG supernatant appeared at 1 × 10(5) plts/ml concentration. Higher concentrations evoked reduction of the stimulatory process. oMSC motility was most significantly stimulated at 1 × 10(6) plts/ml. Stimulating invasiveness of oMSCs needed the much higher concentration of 2 × 10(6) plts/ml. Immunoassays revealed that sheep PG supernatant contains 184.8 pg/ml bFGF and 60.5 ng/ml TGF-β1. Moreover, repopulation of acellular heart valve matrices was significantly enhanced by PG supernatant addition and resulted in upregulation of the myofibroblast marker alpha-smooth muscle actin.

CONCLUSIONS

Growth factors released from platelets had the potential to induce cell repopulation in a heart valve tissue engineering procedure, through stimulation of mesenchymal stem-cell migration and invasion.

Biomechanical and structural changes following the decellularization of bovine pericardial tissues for use as a tissue engineering scaffold

To achieve natural scaffolds for tissue engineering applications we decellularized bovine pericardial (BP) tissues according to two different protocols: a novel treatment based on Triton(®) X-100 (12 h, 4 °C) (BP1) and a trypsin/EDTA treatment (37 °C, 48 h) (BP2). Results were compared with commercially available acellular xenogeneic biomaterials, Veritas(®) and Collamed(®). Biomechanical characteristics, high (E(h)) and low (E(l)) modulus of elasticity, of the fresh untreated tissue varied with the anatomical direction (apex to base (T) to transverse (L)) (mean ± SDEV): (41.63 ± 14.65-48.12 ± 10.19 MPa and 0.27 ± 0.05-0.30 ± 0.12 MPa respectively). BP1 had no mechanical effect (44.65 ± 19.73-52.67 ± 7.59 MPa and 0.37 ± 0.14-0.37 ± 0.11 MPa, respectively) but BP2 resulted in significant decrease in E(h) and E(l) (20.96 ± 8.17-36.82 ± 3.23 MPa and 0.20 ± 0.06-0.23 ± 0.06 MPa). Hysteresis ratio (h) varied (19-26 % of the loading energy) independently of anatomical direction. Glycosaminoglycans content was unaffected by BP1, while 22 % of chondroitin/dermatan sulphate and 60 % of hyaluronan were removed after BP2 treatment. Endothelial cell adhesion was achieved after 24 h and 3 days cell culture.

Evaluation of humoral immune response to donor HLA after implantation of cellularized versus decellularized human heart valve allografts

We have evaluated the development of antibodies in response to donor allograft valve implant in patients who received cellularized and decellularized allografts and determined possible immunogenic epitopes considered responsible for antibodies reactivity. Serum samples from all recipients who received cellularized allografts or decellularized allografts were collected before valve replacement and at 5, 10, 30 and 90 days post-operatively and frozen until required. Tests were performed using the Luminex-based single human leukocyte antigen (HLA)-A, -B, -C and HLA-DR, -DQ antigen microsphere assay. To determine possible immunogenic epitopes, we used the HLAMatchmaker (HLAMM) software if applicable. Decellularized grafts elicited lower levels of anti-HLA class I and II antibody formation after implantation than cellularized allografts. All patients from cellularized group presented donor-specific antibodies class I and II within 3 months of observation period. In HLAMM analysis, the cellularized group had significantly higher numbers of immunogenic epitopes than decellularized group for both class I and II (p: 0.002 - cl I / p: 0.009 - cl II / p: 0.004 - cl I and II). Our findings demonstrate that the anti-HLA antibodies detected in the cellularized group were against donor HLA possible immunogenic epitopes and that in the decellularized group the anti-HLA antibodies were not against donor HLA possible immunogenic epitopes. These findings lead us to suggest that choosing sodium dodecyl sulfate decellularization process is the best alternative to decrease the immunogenicity of allograft valve transplant.