Dielectric properties of yeast cells as determined by electrorotation

Bio-inspired microfluidics: A review

Biomicrofluidics, a subdomain of microfluidics, has been inspired by several ideas from nature. However, while the basic inspiration for the same may be drawn from the living world, the translation of all relevant essential functionalities to an artificially engineered framework does not remain trivial. Here, we review the recent progress in bio-inspired microfluidic systems via harnessing the integration of experimental and simulation tools delving into the interface of engineering and biology. Development of "on-chip" technologies as well as their multifarious applications is subsequently discussed, accompanying the relevant advancements in materials and fabrication technology. Pointers toward new directions in research, including an amalgamated fusion of data-driven modeling (such as artificial intelligence and machine learning) and physics-based paradigm, to come up with a human physiological replica on a synthetic bio-chip with due accounting of personalized features, are suggested. These are likely to facilitate physiologically replicating disease modeling on an artificially engineered biochip as well as advance drug development and screening in an expedited route with the minimization of animal and human trials.

Recent Advances in Microscale Electroporation

Electroporation (EP) is a commonly used strategy to increase cell permeability for intracellular cargo delivery or irreversible cell membrane disruption using electric fields. In recent years, EP performance has been improved by shrinking electrodes and device structures to the microscale. Integration with microfluidics has led to the design of devices performing static EP, where cells are fixed in a defined region, or continuous EP, where cells constantly pass through the device. Each device type performs superior to conventional, macroscale EP devices while providing additional advantages in precision manipulation (static EP) and increased throughput (continuous EP). Microscale EP is gentle on cells and has enabled more sensitive assaying of cells with novel applications. In this Review, we present the physical principles of microscale EP devices and examine design trends in recent years. In addition, we discuss the use of reversible and irreversible EP in the development of therapeutics and analysis of intracellular contents, among other noteworthy applications. This Review aims to inform and encourage scientists and engineers to expand the use of efficient and versatile microscale EP technologies.

Measurement of dielectric properties of cells at single-cell resolution using electrorotation

Dielectric properties of a cell are biophysical properties of high interest for various applications. However, measuring these properties accurately is not easy, which can be exemplified by the large variations in reported dielectric properties of the same cell types. This paper presents a method for measuring the dielectric properties of cells at high frequency, especially lipid-producing microalgae, at single-cell resolution, by integrating an electrorotation-based dielectric property measurement method with a negative dielectrophoretic (nDEP) force-based single-cell trapping method into a single device. In this method, a four-electrode nDEP structure was used to trap a single cell in an elevated position in the center of another four-electrode structure that can apply electrorotational force. By measuring the speed of cell rotation under different applied electrorotation frequencies and fitting the results into a theoretical core-shell cell model, the dielectric properties of cells, including membrane capacitance and cytoplasm conductivity, could be obtained. This system was applied to measure the dielectric properties of lipid-accumulating microalga Chlamydomonas reinhardtii strain Sta6 by applying an electrorotation signal of up to 100 MHz. By utilizing a broad frequency range and expanding the measurement spectra to a high frequency region, increased accuracy in fitting the dielectric parameters to a theoretical model was possible, especially the cytoplasm conductivity. The developed method can be used in various applications, such as screening microalgae based on their lipid production capabilities, separating cells of different dielectric properties, identifying different cell types, as well as conducting basic biophysical analyses of cellular properties.

Dielectric Dispersion Modulated Sensing of Yeast Suspension Electroporation

A specific pulsed electric field protocol can be used to induce electroporation. This is used in the food industry for yeast pasteurization, in laboratories for generic transfer and the medical field for cancer treatment. The sensing of electroporation can be done with simple ‘instantaneous’ voltage-current analysis. However, there are some intrinsic low-frequency phenomena superposing the electroporation current, such as electrode polarization. The biological media are non-homogeneous, giving them specific characterization in the broad frequency spectrum. For example, the cell barrier, i.e., cell membrane, causes so called β-dispersion in the frequency range of tens to thousands of kHz. Electroporation is a dynamic phenomenon characterized by altering the cell membrane permeability. In this work, we show that the impedance measurement at certain frequencies could be used to detect the occurrence of electroporation, i.e., dielectric dispersion modulated sensing. This approach may be used for the design and implementation of electroporation systems. Yeast suspension electroporation is simulated to show changes in the frequency spectrum. Moreover, the alteration depends on characteristics of the system. Three types of external buffers and their characteristics are evaluated.

Application of the Taguchi method to explore a robust condition of tumor-treating field treatment

Tumor-treating fields have potential as minimally invasive cancer treatment. This study aimed to explore the optimum tumor-treating field conditions that minimize unpredicted variations in therapeutic outcomes resulting from differences in cell size and electrical properties. The electric field concentration that induces a dielectrophoretic force near the division plane of a mitotic cell was calculated by finite element analysis for 144 cases, based on different combinations of six noise factors associated with cells and four controllable factors including frequency, as determined by the Taguchi method. Changing the frequency from 200 to 400 kHz strongly increased robustness in producing a dielectrophoretic force, irrespective of noise factors. However, this frequency change reduced the force magnitude, which can be increased by simply applying a higher voltage. Based on additional simulations that considered this trade-off effect, a frequency of 300 kHz is recommended for a robust TTF treatment with allowable variations. The dielectrophoretic force was almost independent of the angle of applied electric field deviated from the most effective direction by ±20 degrees. Furthermore, increased robustness was observed for extracellular fluid with higher conductivity and permittivity. The Taguchi method was useful for identifying robust tumor-treating field therapy conditions from a considerably small number of replicated simulations.

Energy absorption of human red blood cells and conductivity of the cytoplasm influenced by temperature

The energy absorbed into tissues is known as the specific energy absorption (SAR) which is dependent on conductivity of the tissue. We calculated cytoplasmic conductivity of human red blood cell (HRBC) using the intracellular ionic concentrations and the Debye-Hückel-Onsager relation. The overall concentration is determined by cell volume and cell water content. The calculated HRBC conductivity at 25 ^o C was σ_c,₂₅ = 0.5566 ± 0.0146 S m^-1, ±SE). It is exponentially related to temperature: Q₁₀ ≈ 1.866. At 37 ^o C, the calculated SAR value is 1.6 W kg^-1 using a linear temperature compensation of conductivity. However, if using a biologically realistic non-linear temperature compensated conductivity, the SAR is ≈ 2.62 ± 0.05 W kg^-1. The relationship between SAR and temperature increase is not straightforward. Since there is a wide variance in cellular ionic and water perfusion rates more tissue-specific SAR limits which consider temperature-related factors would be valuable.

Thermal Shock Response of Yeast Cells Characterised by Dielectrophoresis Force Measurement

Dielectrophoresis is an electric force experienced by particles subjected to non-uniform electric fields. Recently, several technologies have been developed focused on the use of dielectrophoretic force (DEP) to manipulate and detect cells. On the other hand, there is no such great development in the field of DEP-based cell discrimination methods. Despite the demand for methods to differentiate biological cell states, most DEP developed methods have been focused on differentiation through geometric parameters. The novelty of the present work relies upon the point that a DEP force cell measurement is used as a discrimination method, capable of detecting heat killed yeast cells from the alive ones. Thermal treatment is used as an example of different biological state of cells. It comes from the fact that biological properties have their reflection in the electric properties of the particle, in this case a yeast cell. To demonstrate such capability of the method, 279 heat-killed cells were measured and compared with alive cells data from the literature. For each cell, six speeds were taken at different points in its trajectory inside a variable non-uniform electric field. The electric parameters in cell wall conductivity, cell membrane conductivity, cell membrane permittivity of the yeast cell from bibliography explains the DEP experimental force measured. Finally, alive and heat-treated cells were distinguished based on that measure. Our results can be explained through the well-known damage of cell structure characteristics of heat-killed cells.

On Modeling Diversity in Electrical Cellular Response: Data-Driven Approach

Electrical properties of biological cells and tissues possess valuable information that enabled numerous applications in biomedical engineering. The common foundation behind them is a numerical model that can predict electrical response of a single cell or a network of cells. We analyzed the past empirical observations to propose the first statistical model that accurately mimics biological diversity among animal cells, yeast cells, and bacteria. Based on membrane elasticity and cell migration mechanisms, we introduce a more realistic three-dimensional geometry generation procedure that captures membrane protrusions and retractions in adherent cells. Together, they form a model of diverse electrical response across multiple cell types. We experimentally verified the model with electrical impedance spectroscopy of a single human cervical carcinoma (HeLa) cell on a microelectrode array. The work is of particular relevance to medical diagnostic and therapeutic applications that involve exposure to electric and magnetic fields.

Characterization of sequentially-staged cancer cells using electrorotation

The identification and separation of cells from heterogeneous populations is critical to the diagnosis of diseases. Label-free methodologies in particular have been developed to manipulate individual cells using properties such as density and morphology. The electrical properties of malignant cells, including the membrane capacitance and cytoplasmic conductivity, have been demonstrated to be altered compared to non-malignant cells of similar origin. Here, we exploit these changes to characterize individual cells in a sequentially-staged in vitro cancer model using electrorotation (EROT)—the rotation of a cell induced by a rotating electric field. Using a microfabricated device, a dielectrophoretic force to suspend cells while measuring their angular velocity resulting from an EROT force applied at frequencies between 3 kHz to 10 MHz. We experimentally determine the EROT response for cells at three stages of malignancy and analyze the resultant spectra by considering models that include the effect of the cell membrane alone (single-shell model) and the combined effect of the cell membrane and nucleus (double-shell model). We find that the cell membrane is largely responsible for a given cell’s EROT response between 3 kHz and 10 MHz. Our results also indicate that membrane capacitance, membrane conductance, and cytoplasmic conductivity increase with an increasingly malignant phenotype. Our results demonstrate the potential of using electrorotation as a means making of non-invasive measurements to characterize the dielectric properties of cancer cells.

Characterization of Simple and Double Yeast Cells Using Dielectrophoretic Force Measurement

Dielectrophoretic force is an electric force experienced by particles subjected to non-uniform electric fields. In recent years, plenty of dielectrophoretic force (DEP) applications have been developed. Most of these works have been centered on particle positioning and manipulation. DEP particle characterization has been left in the background. Likewise, these characterizations have studied the electric properties of particles from a qualitative point of view. This article focuses on the quantitative measurement of cells’ dielectric force, specifically yeast cells. The measures are obtained as the results of a theoretical model and an instrumental method, both of which are developed and described in the present article, based on a dielectrophoretic chamber made of two V-shaped placed electrodes. In this study, 845 cells were measured. For each one, six speeds were taken at different points in its trajectory. Furthermore, the chamber design is repeatable, and this was the first time that measurements of dielectrophoretic force and cell velocity for double yeast cells were accomplished. To validate the results obtained in the present research, the results have been compared with the dielectric properties of yeast cells collected in the pre-existing literature.

Membrane capacitance of thousands of single white blood cells

As label-free biomarkers, the electrical properties of single cells are widely used for cell type classification and cellular status evaluation. However, as intrinsic cellular electrical markers, previously reported membrane capacitances (e.g. specific membrane capacitance C_spec and total membrane capacitance C_mem) of white blood cells were derived from tens of single cells, lacking statistical significance due to low cell numbers. In this study, white blood cells were first separated into granulocytes and lymphocytes by density gradient centrifugation and were then aspirated through a microfluidic constriction channel to characterize both C_spec and C_mem Thousands of granulocytes (n_cell = 3327) and lymphocytes (n_cell = 3302) from 10 healthy blood donors were characterized, resulting in C_spec values of 1.95 ± 0.22 µF cm^-2 versus 2.39 ± 0.39 µF cm^-2 and C_mem values of 6.81 ± 1.09 pF versus 4.63 ± 0.57 pF. Statistically significant differences between granulocytes and lymphocytes were located for both C_spec and C_mem In addition, neural network-based pattern recognition was used to classify white blood cells, producing successful classification rates of 78.1% for C_spec and 91.3% for C_mem, respectively. These results indicate that as intrinsic bioelectrical markers, membrane capacitances may contribute to the classification of white blood cells.

Furthering the state of knowledge on the electric properties of hemi-ellipsoidal single cells and cell patches on electrodes

The impedance of electrodes with adherent biological cells correlates with cell viability and proliferation. To model this correlation, we exploited the idea that the introduction of a highly conductive layer into the equatorial equipotential slice of a system with an oriented, freely suspended, single ellipsoidal cell may split the system into mirror-symmetrical halves without changing the field distribution. Each half possesses half of the system's impedance and contains a hemiellipsoidal cell attached to the conductive layer, which can be considered a bottom electrode. For a hemiellipsoidal adherent cell model (ACM) with standard electrical properties for the external and cellular media, the assumption of a bottom membrane and a subcellular cleft in the 100 nm range, as found in adherent cells, changed the potential distribution over a one-% range up to frequencies of 1 MHz. For simplicity, potential distributions for slices of spheroidal objects can be numerically calculated in 2D. The 2D distributions can be converted into three dimensions using simplified equations for the influential radii of spheroids. After the ACM approach was expanded to adherent cell patch models (APMs), the feasibility of our model modifications was tested using two criteria: the constancy of the equipotential plane touching the poles of ACMs or APMs and a comparison of the impedance, which could be numerically calculated from the overall current between the bottom electrode and a plane-parallel counter-electrode, with the impedance of the suspension obtained from Maxwell-Wagner's mixing equation applied to hemiellipsoidal cells.

Modeling of Transmembrane Potential in Realistic Multicellular Structures before Electroporation

Many approaches for studying the transmembrane potential (TMP) induced during the treatment of biological cells with pulsed electric fields have been reported. From the simple analytical models to more complex numerical models requiring significant computational resources, a gamut of methods have been used to recapitulate multicellular environments in silico. Cells have been modeled as simple shapes in two dimensions as well as more complex geometries attempting to replicate realistic cell shapes. In this study, we describe a method for extracting realistic cell morphologies from fluorescence microscopy images to generate the piecewise continuous mesh used to develop a finite element model in two dimensions. The preelectroporation TMP induced in tightly packed cells is analyzed for two sets of pulse parameters inspired by clinical irreversible electroporation treatments. We show that high-frequency bipolar pulse trains are better, and more homogeneously raise the TMP of tightly packed cells to a simulated electroporation threshold than conventional irreversible electroporation pulse trains, at the expense of larger applied potentials. Our results demonstrate the viability of our method and emphasize the importance of considering multicellular effects in the numerical models used for studying the response of biological tissues exposed to electric fields.

Dielectric model for Chinese hamster ovary cells obtained by dielectrophoresis cytometry

We present a dielectric model and its parameters for Chinese hamster ovary (CHO) cells based on a double-shell structure which includes the cell membrane, cytoplasm, nuclear envelope, and nucleoplasm. Employing a dielectrophoresis (DEP) based technique and a microfluidic system, the DEP response of many single CHO cells is measured and the spectrum of the Clausius-Mossotti factor is obtained. The dielectric parameters of the model are then extracted by curve-fitting to the measured spectral data. Using this approach over the 0.6-10 MHz frequency range, we report the values for CHO cells' membrane permittivity, membrane thickness, cytoplasm conductivity, nuclear envelope permittivity, and nucleoplasm conductivity. The size of the cell and its nuclei are obtained using optical techniques.

Enhanced contactless dielectrophoresis enrichment and isolation platform via cell-scale microstructures

We designed a new microfluidic device that uses pillars on the same order as the diameter of a cell (20 μm) to isolate and enrich rare cell samples from background. These cell-scale microstructures improve viability, trapping efficiency, and throughput while reducing pearl chaining. The area where cells trap on each pillar is small, such that only one or two cells trap while fluid flow carries away excess cells. We employed contactless dielectrophoresis in which a thin PDMS membrane separates the cell suspension from the electrodes, improving cell viability for off-chip collection and analysis. We compared viability and trapping efficiency of a highly aggressive Mouse Ovarian Surface Epithelial (MOSE) cell line in this 20 μm pillar device to measurements in an earlier device with the same layout but pillars of 100 μm diameter. We found that MOSE cells in the new device with 20 μm pillars had higher viability at 350 VRMS, 30 kHz, and 1.2 ml/h (control 77%, untrapped 71%, trapped 81%) than in the previous generation device (untrapped 47%, trapped 42%). The new device can trap up to 6 times more cells under the same conditions. Our new device can sort cells with a high flow rate of 2.2 ml/h and throughput of a few million cells per hour while maintaining a viable population of cells for off-chip analysis. By using the device to separate subpopulations of tumor cells while maintaining their viability at large sample sizes, this technology can be used in developing personalized treatments that target the most aggressive cancerous cells.

Theoretical analyses of cellular transmembrane voltage in suspensions induced by high-frequency fields

A change of the transmembrane voltage is considered to cause biophysical and biochemical responses in cells. The present study focuses on the cellular transmembrane voltage (Δφ) induced by external fields. We detail analytical equations for the transmembrane voltage induced by external high-frequency (above the relaxation frequency of the cell membrane) fields on cells of a spherical shape in suspensions and layers. At direct current (DC) and low frequencies, the cell membrane was assumed to be non-conductive under physiologic conditions. However, with increasing frequency, the permittivity of the cytoplasm/extracellular medium and conductivity of the membrane must be accounted for. Our main work is to extend application of the analytical solution of Δφ to the high-frequency range. We first introduce the transmembrane voltage generated by DC and low-frequency exposures on a single cell. Then, we focus on cell suspensions exposed to high-frequency fields. Using the effective medium theory and the reasonable assumption, the approximate analytical solution of Δφ on cells in suspensions and layers can be derived. Phenomenological effective medium theory equations cannot be used to calculate the local electric field of cell suspensions, so we raised a possible solution based on the Bergman theory.

An electrorotation technique for measuring the dielectric properties of cells with simultaneous use of negative quadrupolar dielectrophoresis and electrorotation

This paper presents an effective electrorotation technique for measuring the dielectric properties of cells using a superposed electrical signal, which can simultaneously generate negative quadrupolar dielectrophoretic (nQDEP) force and electrorotational (ROT) torque. The proposed technique involves a three-dimensional (3D) octode, which includes four electrodes arranged in a crisscross pattern on the top and bottom of a microchannel, respectively. A single cell was trapped in the center of the 3D octode by the nQDEP force and simultaneously rotated by the ROT torque. Using the proposed electrorotation technique, ROT spectra of human leukocyte subpopulations (T and B lymphocytes, granulocytes, and monocytes) and metastatic human breast (SkBr3) and lung (A549) cancer cell lines were accurately measured without any disturbance. Torque on the cells generated by the ROT signal was analyzed theoretically based on the single-shell dielectric model for the cells. Furthermore, the dielectric properties of the cells, such as area-specific membrane capacitance and cytoplasm conductivity, were extracted using the measured ROT spectra and the analyzed torque.

Dielectrophoretic capture voltage spectrum for measurement of dielectric properties and separation of cancer cells

In this paper, a new dielectrophoresis (DEP) method based on capture voltage spectrum is proposed for measuring dielectric properties of biological cells. The capture voltage spectrum can be obtained from the balance of dielectrophoretic force and Stokes drag force acting on the cell in a microfluidic device with fluid flow and strip electrodes. The method was demonstrated with the measurement of dielectric properties of human colon cancer cells (HT-29 cells). From the capture voltage spectrum, the real part of Clausius-Mossotti factor of HT-29 cells for different frequencies of applied electric field was obtained. The dielectric properties of cell interior and plasma membrane were then estimated by using single-shell dielectric model. The cell interior permittivity and conductivity were found to be insensitive to changes in the conductivity of the medium in which the cells are suspended, but the measured permittivity and conductivity of cell membrane were found to increase with the increase of medium conductivity. In addition, the measurement of capture voltage spectrum was found to be useful in providing the optimum operating conditions for separating HT-29 cells from other cells (such as red blood cells) using dielectrophoresis.

Viability and membrane potential analysis of Bacillus megaterium cells by impedance flow cytometry

Single cell analysis is an important tool to gain deeper insights into microbial physiology for the characterization and optimization of bioprocesses. In this study a novel single cell analysis technique was applied for estimating viability and membrane potential (MP) of Bacillus megaterium cells cultured in minimal medium. Its measurement principle is based on the analysis of the electrical cell properties and is called impedance flow cytometry (IFC). Comparatively, state-of-the-art fluorescence-based flow cytometry (FCM) was used to verify the results obtained by IFC. Viability and MP analyses were performed with cells at different well-defined growth stages, focusing mainly on exponential and stationary phase cells, as well as on dead cells. This was done by PI and DiOC(2)(3) staining assays in FCM and by impedance measurements at 0.5 and 10 MHz in IFC. In addition, transition growth stages of long-term cultures and agar plate colonies were characterized with both methods. FCM and IFC analyses of all experiments gave comparable results, quantitatively and qualitatively, indicating that IFC is an equivalent technique to FCM for the study of physiological cell states of bacteria.

Nonlinear impedance of whole cells near an electrode as a probe of mitochondrial activity

By simultaneously measuring the bulk media and electrode interface voltages of a yeast (Saccharomyces cerevisiae) suspension subjected to an AC voltage, a yeast-dependent nonlinear response was found only near the current injection electrodes. Computer simulation of yeast near a current injection electrode found an enhanced voltage drop across the yeast near the electrode due to slowed charging of the electrode interfacial capacitance. This voltage drop is sufficient to induce conformation change in membrane proteins. Disruption of the mitochondrial electron transport chain is found to significantly change the measured nonlinear current response, suggesting nonlinear impedance can be used as a non-invasive probe of cellular metabolic activity.

Integrated AC electrokinetic cell separation in a closed-loop device

We integrate electrothermally induced micro-pumps and dielectrophoretic (DEP) traps into micro-circulating fluidic channel loops for yeast cell concentration and separation, two important on-chip cell manipulation tasks, with the same embedded electrodes on-chip. Each fluidic loop design contains well-defined high and low field regions that serve for both fluid transport and cellular manipulation. From a detailed study into the frequency dependent DEP behavior of viable (live) and non-viable (dead) yeast, we demonstrate several operating modes that utilize positive DEP (pDEP) and negative DEP (nDEP) to concentrate both types of cells at either the high or low electric field region and to separate one cell type to a high-field region and one to a low-field region. Because the cells visit the trapping regions repeatedly with the circulating loop design and because of the high shear rates at these stations, our device offers very rapid cell separation and concentration. Two circulating loop designs--one a four-sided square loop, the other a three-sided triangle, with different spatial symmetries and with linear dimensions less than 1 mm, are presented.

Glutaraldehyde enhanced dielectrophoretic yeast cell separation

We introduce a method for improved dielectrophoretic (DEP) discrimination and separation of viable and nonviable yeast cells. Due to the higher cell wall permeability of nonviable yeast cells compared with their viable counterpart, the cross-linking agent glutaraldehyde (GLT) is shown to selectively cross-link nonviable cells to a much greater extent than viable yeast. The DEP crossover frequency (cof) of both viable and nonviable yeast cells was measured over a large range of buffer conductivities (22 muScm-400 muScm) in order to study this effect. The results indicate that due to selective nonviable cell cross-linking, GLT modifies the DEP cof of nonviable cells, while viable cell cof remains relatively unaffected. To investigate this in more detail, a dual-shelled oblate spheroid model was evoked and fitted to the cof data to study cell electrical properties. GLT treatment is shown to minimize ion leakage out of the nonviable yeast cells by minimizing changes in cytoplasm conductivity over a large range of ionic concentrations. This effect is only observable in nonviable cells where GLT treatment serves to stabilize the cell cytoplasm conductivity over a large range of buffer conductivity and allow for much greater differences between viable and nonviable cell cofs. As such, by taking advantage of differences in cell wall permeability GLT magnifies the effect DEP has on the field induced separation of viable and nonviable yeasts.

Effects on capacitance by overexpression of membrane proteins

Functional Channelrhodopsin-2 (ChR2) overexpression of about 10(4)channels/mum(2) in the plasma membrane of HEK293 cells was studied by patch-clamp and freeze-fracture electron microscopy. Simultaneous electrorotation measurements revealed that ChR2 expression was accompanied by a marked increase of the area-specific membrane capacitance (C(m)). The C(m) increase apparently resulted partly from an enlargement of the size and/or number of microvilli. This is suggested by a relatively large C(m) of 1.15+/-0.08 microF/cm(2) in ChR2-expressing cells measured under isotonic conditions. This value was much higher than that of the control HEK293 cells (0.79+/-0.02 microF/cm(2)). However, even after complete loss of microvilli under strong hypoosmolar conditions (100 mOsm), the ChR2-expressing cells still exhibited a significantly larger C(m) (0.85+/-0.07 microF/cm(2)) as compared to non-expressing control cells (0.70+/-0.03 microF/cm(2)). Therefore, a second mechanism of capacitance increase may involve changes in the membrane permittivity and/or thickness due to the embedded ChR2 proteins.

Variable-angle epifluorescence microscopy: a new way to look at protein dynamics in the plant cell cortex

Live-cell microscopy imaging of fluorescent-tagged fusion proteins is an essential tool for cell biologists. Total internal reflection fluorescence microscopy (TIRFM) has joined confocal microscopy as a complementary system for the imaging of cell surface protein dynamics in mammalian and yeast systems because of its high temporal and spatial resolution. Here we present an alternative to TIRFM, termed variable-angle epifluorescence microscopy (VAEM), for the visualization of protein dynamics at or near the plasma membrane of plant epidermal cells and root hairs in whole, intact seedlings that provides high-signal, low-background and near real-time imaging. VAEM uses highly oblique subcritical incident angles to decrease background fluorophore excitation. We discuss the utilities and advantages of VAEM for imaging of fluorescent fusion-tagged marker proteins in studying cortical cytoskeletal and membrane proteins. We believe that the application of VAEM will be an invaluable imaging tool for plant cell biologists.

Electrokinetic measurements of dielectric properties of membrane for apoptotic HL-60 cells on chip-based device

The specific membrane capacitance and conductance of mammalian cells reflect the surface morphological complexities and barrier functions of cell membrane, respectively, and could potentially respond to cell physiological and pathological changes in a measurable manner. In this study, an electrokinetic system was developed by using negative dielectrophoretic force (nDEP force) assisted positioning and electroroation (ROT) measurement. Numerical simulations regarding the geometric model of the electrode were performed primarily for the electric field analysis. The dielectric responses of membrane for apoptotic HL-60 cells induced by bufalin were detected. The membrane capacitance of the cells was found to fall from an initial value of 15.6 +/- 0.9 mF/cm(2) to 6.4 +/- 0.6 mF/cm(2) after a 48 h treatment with 10 nM bufalin. However, the membrane conductance remained almost constant at (2.25 +/- 1.1) x 10(3) S/m(2) during the first 12 h of bufalin treatment and then increased distinctly to (4.2 +/- 1.3) x 10(3) S/m(2) thereafter. Scan electron microscopy (SEM) studies of the cells revealed a decreased complexity in cell membrane morphology following bufalin treatments, suggesting that the observed changes in the membrane capacitance was dominated by the alterations of cell surface structures. The results demonstrate that the ROT technique gives a quantitative analysis of the toxic damage by chemicals to cells and can be exploited in the testing and development of new pharmaceuticals and active cell agents.

Theoretical evaluation of voltage inducement on internal membranes of biological cells exposed to electric fields

Several reports have recently been published on effects of very short and intense electric pulses on cellular organelles; in a number of cases, the cell plasma membrane appeared to be affected less than certain organelle membranes, whereas with longer and less intense pulses the opposite is the case. The effects are the consequence of the voltages induced on the membranes, and in this article we investigate the conditions under which the induced voltage on an organelle membrane could exceed its counterpart on the cell membrane. This would provide a possible explanation of the observed effects of very short pulses. Frequency-domain analysis yields an insight into the dependence of the voltage inducement on the electric and geometric parameters characterizing the cell and its vicinity. We show that at sufficiently high field frequencies, for a range of parameter values the voltage induced on the organelle membrane can indeed exceed the voltage induced on the cell membrane. Particularly, this can occur if the organelle interior is electrically more conductive than the cytosol, or if the organelle membrane has a lower dielectric permittivity than the cell membrane, and we discuss the plausibility of these conditions. Time-domain analysis is then used to determine the courses of the voltage induced on the membranes by pulses with risetimes and durations in the nanosecond range. The particularly high resting voltage in mitochondria, to which the induced voltage superimposes, could contribute to the explanation why these organelles are the primary target of many observed effects.

Orientation behavior of retinal photoreceptors in alternating electric fields

In alternating electric (AC) fields, particles experience polarizing effects that induce dipoles that orient elongated specimens either parallel or perpendicular to the field lines. In this work we studied the behavior of photoreceptor cells' rod outer segments (ROS) in AC fields of different frequencies. We showed that at low frequencies, ROS orient parallel to the field, whereas at higher frequencies they orient perpendicular to the field lines (in the frequency range from 100 Hz to 10 MHz). We found this behavior to be dependent on the physiological state of cells (due to modifications in their electrical properties). To simulate cell damage, the membrane conductivity was changed by treating the cell with gramicidin A, which resulted in a decrease of cytosol conductivity and, consequently, in a change of the orientation behavior of the treated cells. The change of cell orientation with cytosol conductivity is rather sharp, suggesting the potential of the method for accurate evaluation of the cell physiological status. We modeled the interaction between ROS and AC fields approximating the rod cell by a prolate spheroid with a very long axis. The internal compartment of the ellipsoid was considered to be filled with an inhomogeneous medium consisting of alternating layers of membrane and cytoplasm as media modeling the disks. This theoretical model proved to be in good agreement with the experimental results and enabled the derivation (by fitting with the experimental results) of the membrane and cytosol parameters for normal and damaged cells.

Dielectric spectroscopy of Schizosaccharomyces pombe using electrorotation and electroorientation

Two complementary AC electrokinetic techniques electrorotation (ER) and electroorientation (EO) enabled the dielectric characterization of the rod-shaped fission yeast Schizosaccharomyces pombe. The use of microstructured electrodes allowed both ER and EO measurements to be performed over wide ranges of field frequency and medium conductivity. Due to their layered structure, living S. pombe cells exhibited up to three well resolved peaks in their ER spectra and also two distinct orientations, i.e., parallel or perpendicular to the imposed linear field. Heat treatment and enzymatic protoplast isolation led to dramatic changes in the electrokinetic behavior of fission yeast. Application of the theoretical models linking the ER and EO spectra yielded the dielectric parameters of the major structural units of S. pombe cells (cell wall, plasma membrane and cytosol). The dielectric characterization of yeasts has an enormous impact in biotechnology and biomedicine, because electric field pulse techniques (electrofusion and electropermeabilization) are widely used for production of transgenic yeast strains of economic importance. The present study also showed that combined ER and EO measurements can be employed as a powerful diagnostic tool for analyzing changes in yeast structure and physiology upon exposure to various stress conditions.

Viability of Giardia intestinalis cysts and viability and sporulation state of Cyclospora cayetanensis oocysts determined by electrorotation

Electrorotation is a noninvasive technique that is capable of detecting changes in the morphology and physicochemical properties of microorganisms. Electrorotation studies are reported for two intestinal parasites, Giardia intestinalis and Cyclospora cayetanensis. It is concluded that viable and nonviable G. intestinalis cysts can be differentiated by this technique, and support for this conclusion was obtained using a fluorogenic vital dye assay and morphological indicators. The viability of C. cayetanensis oocysts (for which no vital dye assay is currently available) can also be determined by electrorotation, as can their sporulation state. Modeling of the electrorotational response of these organisms was used to determine their dielectric properties and to gain an insight into the changes occurring within them. Electrorotation offers a new, simple, and rapid method for determining the viability of parasites in potable water and food products and as such has important healthcare implications.

Second-order model of membrane electric field induced by alternating external electric fields

With biological cells exposed to ac electric fields below 100 kHz, external field is amplified in the cell membrane by a factor of several thousands (low-frequency plateau), while above 100 kHz, this amplification gradually decreases with frequency. Below 10 MHz, this situation is well described by the established first-order theory which treats the cytoplasm and the external medium as pure conductors. At higher frequencies, capacitive properties of the cytoplasm and the external medium become increasingly important and thus must be accounted for. This leads to a broader, second-order model, which is treated in detail in this paper. Unlike the first-order model, this model shows that above 10 MHz, the membrane field amplification stops decreasing and levels off again in the range of tens (high-frequency plateau). Existence of the high-frequency plateau could have an important impact on present theories of high-frequency electric fields effects on cells and their membranes.

Cell separation by dielectrophoretic field-flow-fractionation

Dielectrophoretic field-flow-fractionation (DEP-FFF) was applied to several clinically relevant cell separation problems, including the purging of human breast cancer cells from normal T-lymphocytes and from CD34+ hematopoietic stem cells, the separation of the major leukocyte subpopulations, and the enrichment of leukocytes from blood. Cell separations were achieved in a thin chamber equipped with a microfabricated, interdigitated electrode array on its bottom wall that was energized with AC electric signals. Cells were levitated by the balance between DEP and sedimentation forces to different equilibrium heights and were transported at differing velocities and thereby separated when a velocity profile was established in the chamber. This bulk-separation technique adds cell intrinsic dielectric properties to the catalog of physical characteristics that can be applied to cell discrimination. The separation process and performance can be controlled through electronic means. Cell labeling is unnecessary, and separated cells may be cultured and further analyzed. It can be scaled up for routine laboratory cell separation or implemented on a miniaturized scale.

Dielectric properties of human leukocyte subpopulations determined by electrorotation as a cell separation criterion

The separation and purification of human blood cell subpopulations is an essential step in many biomedical applications. New dielectrophoretic fractionation methods have great potential for cell discrimination and manipulation, both for microscale diagnostic applications and for much larger scale clinical problems. To discover whether human leukocyte subpopulations might be separable by such methods, the dielectric characteristics of the four main leukocyte subpopulations, namely, B- and T-lymphocytes, monocytes, and granulocytes, were measured by electrorotation over the frequency range 1 kHz to 120 MHz. The subpopulations were derived from human peripheral blood by magnetically activated cell sorting (MACS) and sheep erythrocyte rosetting methods, and the quality of cell fractions was checked by flow cytometry. Mean specific membrane capacitance values were calculated from the electrorotation data as 10.5 (+/- 3.1), 12.6 (+/- 3.5), 15.3 (+/- 4.3), and 11.0 (+/- 3.2) mF/m2 for T- and B-lymphocytes, monocytes, and granulocytes, respectively, according to a single-shell dielectric model. In agreement with earlier findings, these values correlated with the richness of the surface morphologies of the different cell types, as revealed by scanning electron microscopy (SEM). The data reveal that dielectrophoretic cell sorters should have the ability to discriminate between, and to separate, leukocyte subpopulations under appropriate conditions.

Non-invasive determination of bacterial single cell properties by electrorotation

So far, electrorotation and its application to the determination of single cell properties have been limited to eukaryotes. Here an experimental system is described that allows the recording of electrorotation spectra of single bacterial cells. The small physical dimensions of the developed measuring chamber combined with a single frame video analysis made it possible to monitor the rotation of objects as small as bacteria by microscopical observation despite Brownian rotation and cellular movement. Thus physical properties of distinct organelles of E. coli could be simultaneously determined in vivo at frequencies between 1 kHz and 1 GHz. Experimental data were evaluated following a three-shell model of the cell. Electrical conductivities of cytoplasm and outer membrane were determined to 4.4 mS/cm and 25 microS/cm, respectively, that of the periplasmic space was found to increase with the square root of the medium ionic strength. Specific capacitances of inner and outer membrane amounted to 1.4 microF/cm2 and 0.26 microF/cm2, respectively, the thickness of the periplasm to about 50 nm. Heat treatment of the cells lead to a reduction of cytoplasmic conductivity to 0.9 mS/cm, probably caused by an efflux of ions through the permeabilized inner membrane.

Membrane dielectric responses of human T-lymphocytes following mitogenic stimulation

Human peripheral blood T-lymphocytes, normally resting at the G0 phase, were stimulated with phytohemagglutinin (PHA) and interleukin-2 (IL-2) to induce the cell division cycle. The cells were examined at 24-h intervals for up to 96 h by flow cytometry to determine cell cycle distributions and by electrorotation to determine dielectric properties. The average membrane specific capacitance was found to vary from 12 (+/-1.5) mF/m2 prior to stimulation to 10 (+/-1.5) and 16 (+/-3.5) mF/m2 at 24 and 48 h after stimulation, respectively, and to remain unchanged up to 96 h after stimulation. Scanning electron microscopy studies of the cells revealed an increased complexity in cell membrane morphology following stimulation, suggesting that the observed change in the membrane capacitance was dominated by the alteration of cell surface structures. The average electrical conductivity of the cell interior decreased from approximately 1.1 S/m prior to stimulation to approximately 0.8 S/m at 24 h after stimulation and showed little change thereafter. The average dielectric permittivity of the cell interior remained almost unchanged throughout the course of the cell stimulation. The percentage of T-lymphocytes in the S and G2/M phases increased from approximately 4% prior to stimulation to approximately 11 and approximately 34% at 24 and 48 h after stimulation, respectively. The large change in membrane specific capacitance between the 24 and 48 h time period coincided with the large alteration in the cell cycle distribution where the S and G2/M populations increased by approximately 23%. These data, together with an analysis of the variation of the membrane capacitance during the cell cycle based on the cell cycle-dependent membrane lipid accumulation, show that there is a correlation between membrane capacitance and cell cycle phases that reflects alterations in the cell plasma membrane.

Computer-aided analysis of conditions for optimizing practical electrorotation

Previous studies have indicated that the variations in torque induced in particles in electrorotation electrode arrays are sufficiently large to cause errors in electrorotation measurements. In order to avoid this, experimenters usually study particles bounded by an arbitrary region near the centre of the electrodes. By simulating the time-dependent electric field for polynomial electrodes, we have assessed the variation in torque across the centre of the array. By considering both the variation in applied torque and the dielectrophoretic force in the electrode chamber, the optimal conditions for electrorotation experiments have been determined. Further to this, by comparing the torque variation across the electrode chamber for a number of common electrode designs, a comparison of the suitability of each electrode design for multiparticle electrorotation analysis has been made.

Nystatin-induced changes in yeast monitored by time-resolved automated single cell electrorotation

A widespread use of electrorotation for the determination of cellular and subcellular properties has been hindered so far by the need for manual recording of cell movements. Therefore a system has been developed that allows the automatic collection of electrorotation spectra of single cells in real time. It employs a hardware based registration of image moments from which object orientation is calculated. Since the camera's video signal is processed without intermediate image storage a high data throughput of about two recordings per second could be achieved independently of image resolution. This made it possible to monitor changes in cell membrane and cytoplasm of the yeast Saccharomyces cerevisiae under the influence of the antibiotic nystatin with a temporal resolution of 3 min. Up to 20 electrorotation spectra of an individual cell could be collected in the frequency range between 1 kHz and 1 GHz. Two distinct events 7 and 75 min after addition of nystatin were observed with a fast increase in membrane permeability accompanied by a nearly simultaneous drop in cytoplasmic conductivity.

Automatic cell electrorotation measurements: studies of the biological effects of low-frequency magnetic fields and of heat shock

A computer-aided automatic imaging technique has been developed for measuring the electrorotation spectra of up to 256 particles at the same time. This offers advantages over the conventional manual method, especially when rapidly acquired statistical data are necessary in investigations of the response of cells or test beads to chemical exposure, for example. We have applied this technique to investigate the biological effects of heat shock and low-frequency EM fields reported by others for yeast cells. Although heat shock effects were observed, no changes of the electrorotational behaviour could be detected after exposing the cells to 50 Hz, 8 and 80 microT fields. Although this does not rule out the possibility that the cells were influenced by the magnetic fields, it does limit the number of possible physicochemical changes that might have occurred to their cell walls and membranes.