The role of deoxyhexonic acids in the hydrothermal decarboxylation of carbohydrates

Preparation and application of carbon and hollow TiO2 microspheres by microwave heating at a low temperature

A fast, simple, and energy-saving microwave-assisted approach was successfully developed to prepare carbon microspheres. The carbon microspheres with a uniform particle size and good dispersity were prepared using glucose as the raw material and HCl as the dehydrating agent at low temperature (90°C) in an open system with the assistance of microwave heating. The carbon microspheres were characterized by elemental analysis, XRD, SEM, FTIR, TG, and Raman. The results showed that the carbon microspheres prepared under the condition of 18.5% (v/v) HCl and heating for 30 min by microwave had a narrow size distribution. The core–shell structure of the carbon core and TiO2 shell was prepared with (NH4)2TiF6, H3BO3 using the microwave-assisted method. The hollow TiO2 microspheres with good crystallinity and high photocatalytic properties were successfully prepared by sacrificing the carbon microspheres.

High Capacity Nano-Sized Carbon Spheres for Lithium-Ion Battery Anode Materials

A one-step hydrothermal method is reported for synthesizing carbon spheres (Cs) with sucrose as the carbon resource for the anode materials in lithium-ion batteries (LIBs). Firstly, the influences of synthesis temperature and time on particle size and the morphology of the Cs were researched. Then, modified carbon spheres (MCs) were synthesized with some surfactants, such as hexadecyl trimethyl ammonium bromide (CTAB) and polyvinyl alcohol (PVA). Finally, nano-sized MCs with an average diameter of 70 nm, owning the smooth surface and uniform spherical morphology systematically investigated by X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscope (TEM). The outstanding performances of nano-sized MCs synthesized with PVA were demonstrated as anode materials in LIBs. The higher initial discharge capacity of 1180 mAhg^-1 and the excellent discharge capacity of 470 mAhg^-1 were obtained respectively at 100 mAg^-1 (0.27 C) over 50 cycles. The nano-sized MCs has also shown remarkable performance of rate capability of 284.6 mAhg^-1 at 1.5 C. In addition, the cycling reversibility of the nano-sized MCs is more stable than that of the sub-micron sized MCs modified with CTAB and no surfactant respectively.

Complimentary effects of annealing temperature on optimal tuning of functionalized carbon–V2O5 hybrid nanobelts for targeted dual applications in electrochromic and supercapacitor devices

Herein, carbon nanosphere-decorated vanadium pentoxide (C@V₂O₅) hybrid nanobelts were grown via a single step hydrothermal route with improved electronic conductivity as compared to that of pristine oxide. This hybrid nanomaterial exhibits different complimentary ranges of optimum post-growth annealing temperatures, which are suitable for dual applications either in electro-chromic smart windows or in supercapacitors. C@V₂O₅ nanobelts annealed at 350 °C appear to favor electro-chromic applications. They exhibit maximum dynamic optical transmission modulation as they switch from yellow to dark green, fast switching response, and high visible transmittance. In contrast, C@V₂O₅nanobelts annealed at 250 °C have been found to be most suitable for supercapacitor applications. They display a high specific capacity and an enhanced diffusion coefficient. Moreover, they exhibit long lifetimes with a capacity retention of ∼94% even after 5000 cycles of operation. Therefore, the obtained results clearly indicate that optimization of the post-growth annealing temperatures is very important and rather complementary in nature in terms of determining the most favorable device functionalities. It enables us to optimally tune these hybrid nanomaterials for targeted, device-specific, energy applications in either electrochromic or supercapacitor technologies simply based on the annealing temperature alone.

Herein, carbon nanosphere-decorated vanadium pentoxide (C@V₂O₅) hybrid nanobelts were grown via a single step hydrothermal route with improved electronic conductivity as compared to that of pristine oxide.

Ammoxidation of lignocellulosic materials: formation of nonheterocyclic nitrogenous compounds from monosaccharides

Ammoxidized technical lignins are valuable soil-improving materials that share many similarities with native terrestrial humic substances. In contrast to lignins, the chemical fate of carbohydrates as typical minor constituents of technical lignins during the ammoxidation processes has not been thoroughly investigated. Recently, we reported the formation of N-heterocyclic, ecotoxic compounds (OECD test 201) from both monosaccharides (D-glucose, D-xylose) and polysaccharides (cellulose, xylan) under ammoxidation conditions and showed that monosaccharides are a source more critical than polysaccharides in this respect. GC/MS-derivatization analysis of the crude product mixtures revealed that ammoxidation of carbohydrates which resembles the conditions encountered in nonenzymatical browning of foodstuff affords also a multitude of nonheterocyclic nitrogenous compounds such as aminosugars, glycosylamines, ammonium salts of aldonic, deoxyaldonic, oxalic and carbaminic acids, urea, acetamide, α-hydroxyamides, and even minor amounts of α-amino acids. D-glucose and D-xylose afforded largely similar product patterns which differed from each other only for those products that were formed under preservation of the chain integrity and stereoconfiguration of the respective monosaccharide. The kinetics and reaction pathways involved in the formation of the different classes of nitrogenous compounds under ammoxidation conditions are discussed.

Subcritical water as reaction environment: fundamentals of hydrothermal biomass transformation

Subcritical water, that is, water above the boiling and below critical point, is a unique and sustainable reaction medium. Based on its solvent properties, in combination with the often considerable intrinsic water content of natural biomass, it is often considered as a potential solvent for biomass processing. Current knowledge on biomass transformation in subcritical water is, however, still rather scattered without providing a consistent picture. Concentrating on fundamental physical and chemical aspects, this review summarizes the current state of knowledge of hydrothermal biomass conversion in subcritical water. After briefly introducing subcritical water as a reaction medium, its advantages for biomass processing compared to other thermal processes are highlighted. Subsequently, the physical-chemical properties of subcritical water are discussed in the light of their impact on the occurring chemical reactions. The influence of major operational parameters, including temperature, pressure, and reactant concentration on hydrothermal biomass transformation processes are illustrated for selected carbohydrates. Major emphasis is put on the nature of the carbohydrate monomers, since the conversion of the respective polymers is analogous with the additional prior step of hydrolytic depolymerization.

Engineering carbon materials from the hydrothermal carbonization process of biomass

Energy shortage, environmental crisis, and developing customer demands have driven people to find facile, low-cost, environmentally friendly, and nontoxic routes to produce novel functional materials that can be commercialized in the near future. Amongst various techniques, the hydrothermal carbonization (HTC) process of biomass (either of isolated carbohydrates or crude plants) is a promising candidate for the synthesis of novel carbon-based materials with a wide variety of potential applications. In this Review, we will discuss various synthetic routes towards such novel carbon-based materials or composites via the HTC process of biomass. Furthermore, factors that influence the carbonization process will be analyzed and the special chemical/physical properties of the final products will be discussed. Despite the lack of a clear mechanism, these novel carbonaceous materials have already shown promising applications in many fields such as carbon fixation, water purification, fuel cell catalysis, energy storage, CO(2) sequestration, bioimaging, drug delivery, and gas sensors. Some of the most promising examples will also be discussed here, demonstrating that the HTC process can rationally design a rich family of carbonaceous and hybrid functional carbon materials with important applications in a sustainable fashion.

Synthesis of silica/carbon-encapsulated core-shell spheres: templates for other unique core-shell structures and applications in in situ loading of noble-metal nanoparticles

Silica@carbon core-shell spheres have been synthesized via a hydrothermal carbonization procedure with glucose as the carbon precursor and silica spheres as the cores. Such SiO(2)@C core-shell spheres can be further used as templates to produce SiO(2)@C@SiO(2), and SiO(2)@SiO(2) spheres with a vacant region in two SiO(2) shells, noble-metal nanoparticle loaded SiO(2)@C core-shell spheres, and hollow carbon capsules through different follow-up processes. The obtained core-shell materials possess remarkable chemical reactivity in reducing noble-metal ions to nanoparticles, e.g., platinum. These unique core-shell spherical composites could find applications in catalyst supports, adsorbents, encapsulation, nanoreactors, and reaction templates.

Hollow carbonaceous capsules from glucose solution

An easy hydrothermal method was developed for preparing hollow carbonaceous capsules with reactive surface layer and tunable void size, and shell thickness through a hydrothermal method at 180 degrees C, using only the anionic surfactant sodium dodecyl sulfate (SDS) and glucose as starting material. Ag nanoparticles of less than 10 nm were loaded onto the surface of capsules under ambient condition. Products were characterized with TEM, SEM, and FT-IR spectra. The process is green, cheap, and easy. Since no toxic materials were used in preparation and as-prepared capsules a shared reactive surface layer and a stable carbonaceous framework, the capsules might find application in fields such as biochemistry, pharmaceutics, and clinical diagnostics.

Kinetics of organic transformations under mild aqueous conditions: implications for the origin of life and its metabolism

The rates of thermal transformation of organic molecules containing carbon, hydrogen, and oxygen were systematically examined in order to identify the kinetic constraints that governed origin-of-life organic chemistry under mild aqueous conditions. Arrhenius plots of the kinetic data were used to estimate the reaction of half-lifes at 50 degrees C. This survey showed that hydrocarbons and organic substances containing a single oxygenated group were kinetically the most stable; whereas organic substances containing two oxygenated groups in which one group was an alpha- or beta-positioned carbonyl group were the most reactive. Compounds with an alpha- or beta-positioned carbonyl group (aldehyde or ketone) had rates of reaction that were up to 10(24)-times faster than rates of similar molecules lacking the carbonyl group. This survey of organic reactivity, together with estimates of the molecular containment properties of lipid vesicles and liquid spherules, indicates that an origins process in a small domain that used C,H,O-intermediates had to be catalytic and use the most reactive organic molecules to prevent escape of its reaction intermediates.

Hydrothermal upgrading of biomass to biofuel; studies on some monosaccharide model compounds

During the hydrothermal upgrading of biomass, hydrolysis to glucose is an important step. To elucidate some of the reaction pathways that follow this initial hydrolysis, the hydrothermal treatment (340 degrees C, 27.5 MPa, 25-204 s) of dilute (50 mM) solutions of D-glucose and some other monosaccharides were studied. As a result of the increase of Kw under subcritical conditions, both acid and base catalysed reactions occur. The acid catalysed reactions are mainly dehydrations leading initially to 5-hydroxymethylfurfural. Important base catalysed reactions result in glycolaldehyde and glyceraldehyde. Further fragmentations and dehydrations lead to a variety of low molecular weight compounds such as formic acid, acetic acid, lactic acid, acrylic acid, 2-furaldehyde and 1,2,4-benzenetriol. Important pathways leading to a decrease of the O-content of the liquid reaction products start from the intermediate glyceraldehyde, which forms pyruvaldehyde, which in its turn is converted into formic acid and acetaldehyde. The latter compound can also be formed via isomerisation of glyceraldehyde into lactic acid followed by decarbonylation.