Structural and actin-binding properties of the trypsin-produced HMM and S1 from gizzard smooth muscle myosin

Conformational changes in actin-myosin isoforms probed by Ni(II).Gly-Gly-His reactivity

Crucial information concerning conformational changes that occur during the mechanochemical cycle of actin-myosin complexes is lacking due to the difficulties encountered in obtaining their three-dimensional structures. To obtain such information, we employed a solution-based approach through the reaction of Ni(II).tripeptide chelates which are able to induce protein cleavage and cross-linking reactions. Three different myosin motor domain isoforms in the presence of actin and nucleotides were treated with a library of Ni(II).tripeptide chelates and two reactivities were observed: (1) muscle motor domains were cross-linked to actin, as also observed for the skeletal muscle isoform, while (2) the Dictyostelium discoideum motor domain was cleaved at a single locus. All Ni(II).tripeptide chelates tested generated identical reaction products, with Ni(II).Gly-Gly-His, containing a C-terminal carboxylate, exhibiting the highest reactivity. Mass spectrometric analysis showed that protein cleavage occurred within segment 242-265 of the Dictyostelium discoideum myosin heavy chain sequence, while the skeletal myosin cross-linking site was as localized previously within segment 506-561. Using a fusion protein consisting of the yellow and cyan variants of green fluorescent protein linked by Dictyostelium discoideum myosin segment 242-265, we demonstrated that the primary sequence of this segment alone is not a sufficient substrate for Ni(II).Gly-Gly-His-induced cleavage. Importantly, the cross-linking and cleavage reactions both exhibited specific structural sensitivities to the nature of the nucleotide bound to the active site, validating the conformational changes suggested from crystallographic data of the actin-free myosin motor domain.

Functional characterization of the secondary actin binding site of myosin II

The role of the interaction between actin and the secondary actin binding site of myosin (segment 565-579 of rabbit skeletal muscle myosin, referred to as loop 3 in this work) has been studied with proteolytically generated smooth and skeletal muscle myosin subfragment 1 and recombinant Dictyostelium discoideum myosin II motor domain constructs. Carbodiimide-induced cross-linking between filamentous actin and myosin loop 3 took place only with the motor domain of skeletal muscle myosin and not with those of smooth muscle or D. discoideum myosin II. Chimeric constructs of the D. discoideum myosin motor domain containing loop 3 of either human skeletal muscle or nonmuscle myosin were generated. Significant actin cross-linking to the loop 3 region was obtained only with the skeletal muscle chimera both in the rigor and in the weak binding states, i.e., in the absence and in the presence of ATP analogues. Thrombin degradation of the cross-linked products was used to confirm the cross-linking site of myosin loop 3 within the actin segment 1-28. The skeletal muscle and nonmuscle myosin chimera showed a 4-6-fold increase in their actin dissociation constant, due to a significant increase in the rate for actin dissociation (k(-)(A)) with no significant change in the rate for actin binding (k(+A)). The actin-activated ATPase activity was not affected by the substitutions in the chimeric constructs. These results suggest that actin interaction with the secondary actin binding site of myosin is specific for the loop 3 sequence of striated muscle myosin isoforms but is apparently not essential either for the formation of a high affinity actin-myosin interface or for the modulation of actomyosin ATPase activity.

Differences in the ionic interaction of actin with the motor domains of nonmuscle and muscle myosin II

Changes in the actin-myosin interface are thought to play an important role in microfilament-linked cellular movements. In this study, we compared the actin binding properties of the motor domain of Dictyostelium discoideum (M765) and rabbit skeletal muscle myosin subfragment-1 (S1). The Dictyostelium motor domain resembles S1(A2) (S1 carrying the A2 light chain) in its interaction with G-actin. Similar to S1(A2), none of the Dictyostelium motor domain constructs induced G-actin polymerization. The affinity of monomeric actin (G-actin) was 20-fold lower for M765 than for S1(A2) but increasing the number of positive charges in the loop 2 region of the D. discoideum motor domain (residues 613-623) resulted in equivalent affinities of G-actin for M765 and for S1. Proteolytic cleavage and cross-linking approaches were used to show that M765, like S1, interacts via the loop 2 region with filamentous actin (F-actin). For both types of myosin, F-actin prevents trypsin cleavage in the loop 2 region and F-actin segment 1-28 can be cross-linked to loop 2 residues by a carbodiimide-induced reaction. In contrast with the S1, loop residues 559-565 of D. discoideum myosin was not cross-linked to F-actin, probably due to the lower number of positive charges. These results confirm the importance of the loop 2 region of myosin for the interaction with both G-actin and F-actin, regardless of the source of myosin. The differences observed in the way in which M765 and S1 interact with actin may be linked to more general differences in the structure of the actomyosin interface of muscle and nonmuscle myosins.

Smooth muscle myosin subfragment-1 is a kinetic analogue for heavy meromyosin in the extended conformation

The 10S-->6S (Flexed-->Extended) transition in smooth muscle myosin is related to increased ATPase activity, but there is controversy over whether the analogous 9S-->7S transition in HMM is also associated with ATPase activity. We therefore studied the association of ionic strength, phosphorylation, and ATPase activity for HMM as compared to S1 which has no apparent flexed conformation. In addition, we performed both steady state and single turnover analyses, to control for artifacts due to multiple subfragment populations that might skew steady state results. At low ionic strength where myosin and HMM are in the flexed conformation, HMM had a near zero ATPase activity while S-1 had a high ATPase rate (0.07 s-1). At 400 mM ionic strength, where both myosin and HMM are in the extended conformation, S1 and HMM had the same ATPase rate (0.04 s-1). Phosphorylation did not affect S1 significantly, but shifted the HMM curve to higher rates at lower ionic strengths. Both steady state and single turnover experiments gave the same results, indicating that steady state results were not skewed by multiple subfragment populations. These data indicate that HMM has a conformation-ATPase relation similar to that observed with myosin. Furthermore, these findings suggest that the S1 ATPase rate corresponds to that of HMM in the extended conformation.

Interaction between the heavy and the regulatory light chains in smooth muscle myosin subfragment 1

The interaction between the heavy and the regulatory light chains within chicken gizzard myosin heads was investigated by using a zero-length chemical cross-linker, 1-ethyl-3-[3-(dimethylamino)-propyl]carbodiimide (EDC). The chicken gizzard subfragment 1 (S-1) used was treated with papain so that the heavy chain was partly cleaved into the NH2-terminal 72K and the COOH-terminal 24K fragments and the regulatory light chain into the 16K fragment. S-1 was reacted with EDC either alone or in the presence of ATP or F-actin. In all cases, the 16K fragment of the regulatory light chain formed a covalent cross-link with the 24K heavy chain fragment but not with the 72K fragment. The 38K cross-linked peptide, which was the product of cross-linking between the 16K light chain and the 24K heavy chain fragments, was isolated and further cleaved with cyanogen bromide and arginylendopeptidase. Smaller cross-linked peptides were purified by reverse-phase HPLC and then characterized by amino acid analysis and sequencing. The results indicated that cross-linking occurred between Lys-845 in the heavy chain and Asp-168, Asp-170, or Asp-171 in the regulatory light chain. The position of the cross-linked lysine was only three amino acid residues away from the invariant proline residue mapped as the S-1-rod hinge by McLachlan and Karn [McLachlan, A. D., & Karn, J. (1982) Nature (London) 299, 226-231]. We propose that the COOH-terminal region of the regulatory light chain is located in the neck region of myosin and that this region and the phosphorylation site of the regulatory light chain together may play a role in the phosphorylation-induced conformational change of gizzard myosin.

LC20 and kinetics of gizzard myosin subfragment-1: digestion with papain vs. S. aureus protease

Previous reports have shown that papain-digested gizzard subfragment-1 (PAP-S1) has a cleaved regulatory light chain (LC20), and Vmax similar to phosphorylated heavy meromyosin (HMM) (Greene et al., Biochemistry 22:530-535, 1983; Sellers et al., J. Biol. Chem. 257:13880-13883, 1982; Umemoto et al., J. Biol. Chem. 264:1431-1436, 1989], while S. aureus protease-digested S-1 (SAP-S1) has intact LC20, but Vmax closer to that of unphosphorylated HMM [Ikebe and Hartshorne, 1985]. To determine whether intact LC20 inhibits ATPase activity for subfragment-1 (S1), we compared the kinetic properties and structures of unphosphorylated PAP-S1 and SAP-S1. SDS-PAGE showed that SAP-S1 had 68 and 24 KDa heavy chain and 20 and 17 KDa light chain components. PAP-S1 (15 minutes digestion at 20 degrees C) also had 68 and 17 KDa bands, but the single 24 KDa band (24HC) was replaced by a group of 22-24 KDa fragments and LC20 was cleaved to a 16 KDa fragment. At 13 mM ionic strength, both PAP-S1 and SAP-S1 had Vmax similar to phosphorylated HMM (1.1-1.5 s-1). SAP-S1 had the same KATPase as phosphorylated HMM (38 microM actin), but KATPase for PAP-S1 was 3-fold stronger (11 microM actin). Subsequent digestion of SAP-S1 with papain did not significantly change Vmax, but as LC20 and 24HC were cleaved, both KATPase and Kbinding strengthened 3- to 5-fold. Thus, intact LC20 did not inhibit, and cleavage of LC20 did not increase Vmax for S1. Rather, papain cleavage of LC20 and 24HC was associated with strengthened actin binding.

Conformational transitions within the head and at the head-rod junction in smooth muscle myosin studied with a limited proteolysis method

It was previously shown that tryptic digestion of subfragment 1 (S1) of skeletal muscle myosins at 0 degree C results in cleavage of the heavy chain at a specific site located 5 kDa from the NH2-terminus. This cleavage is enhanced by nucleotides and suppressed by actin and does not occur at 25 degrees C, except in the presence of nucleotide. Here we show a similar temperature sensitivity and protection by actin of an analogous chymotryptic cleavage site in the heavy chain of gizzard S1. The results support the view that the myosin head, in general, can exist in two different conformational states even in the absence of nucleotides and actin, and indicate that the heavy chain region 5 kDa from the NH2-terminus is involved in the communication between the sites of nucleotide and actin binding. We also show here for the first time that the S1-S2 junction in gizzard myosin can be cleaved by chymotrypsin and that this cleavage (observed in papain-produced S1 devoid of the regulatory light chain) is also temperature-dependent but insensitive to nucleotides and actin. It is suggested that the temperature-dependent alteration in the flexibility of the head-rod junction, which is apparent from these and similar observations on skeletal muscle myosin [Miller, L. & Reisler, E. (1985) J. Mol. Biol. 182, 271-279; Redowicz, M.J. & Strzelecka-Gołaszewska, H. (1988) Eur. J. Biochem. 177, 615-624], may contribute to the temperature dependence of some steps in the cross-bridge cycle.

Reaction of thiol groups of gizzard myosin heavy chains with 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole

Chicken gizzard myosin treated with 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) resulted in a 65% inhibition of the K(+)-ATPase (myosin ATP phosphohydrolase (actin translocating), EC 3.6.1.32) activity and 3.5 mol of the reagent was bound per 4.7 x 10(5) g protein. The labeling was limited to the heavy chain region and none of the light chains were lost. MgATP had no effect on the inactivation or labeling pattern. Thiolysis of NBD-myosin with dithiothreitol restored the K(+)-ATPase activity and concurrently, 1 mol of the NBD group was removed from the heavy chain region. Cysteine residues were modified in NBD-myosin at sites other than the active site when the enzyme activity was inhibited. There was a difference in the extent of NBD-Cl modification of gizzard myosin at 0.6 M KCl (6 S elongated state) when compared to that at 0.15 M KCl (10 S folded state). This was also seen in the heavy meromyosin-like chymotryptic fragments and tryptic fragments of NBD-myosin. The reagent NBD-Cl can detect changes in the conformation of gizzard myosin by way of its reaction with thiol groups of the heavy chain region.

Monoclonal antibodies detect and stabilize conformational states of smooth muscle myosin

Antibodies with epitopes near the heavy meromyosin/light meromyosin junction distinguish the folded from the extended conformational states of smooth muscle myosin. Antibody 10S.1 has 100-fold higher avidity for folded than for extended myosin, while antibody S2.2 binds preferentially to the extended state. The properties of these antibodies provide direct evidence that the conformation of the rod is different in the folded than the extended monomeric state, and suggest that this perturbation may extend into the subfragment 2 region of the rod. Two antihead antibodies with epitopes on the heavy chain map at or near the head/rod junction. Magnesium greatly enhances the binding of these antibodies to myosin, showing that the conformation of the heavy chain in the neck region changes upon divalent cation binding to the regulatory light chain. Myosin assembly is also altered by antibody binding. Antibodies that bind to the central region of the rod block disassembly of filaments upon MgATP addition. Antibodies with epitopes near the COOH terminus of the rod, in contrast, promote filament depolymerization, suggesting that this region of the tail is important for assembly. The monoclonal antibodies described here are therefore useful both for detecting and altering conformational states of smooth muscle myosin.

Formation and movement of myosin-containing structures in living fibroblasts

Gizzard myosin, fluorescently labeled with tetramethylrhodamine iodoacetamide, was microinjected into living 3T3 fibroblasts to label myosin-containing structures. The fluorophore was located predominantly on the heavy chain near the COOH terminus of the S1 head and on the 17-kD light chain. After microinjection of a tracer amount into living 3T3 cells, the fluorescent myosin showed a distribution identical to that revealed by immunofluorescence with antimyosin antibodies. Injected myosin became localized in small beads, which were found along large stress fibers, along fine fibers, and in a poorly organized form near the lamellipodia. De novo assembly of beads was observed continuously within or near the lamellipodia, suggesting that myosin molecules may undergo a constant cycling between polymerized and unpolymerized states. The nascent structures then moved away from lamellipodia and became organized into linear arrays. Similar movement was also observed for beads already associated with linear structures, and may represent a continuous flux of myosin structures. The dynamic reorganization of myosin may play an important role in cell movement and polarity.

Carbodiimide-catalyzed cross-linking sites in the heads of gizzard heavy meromyosin attached to F-actin

In the rigor complex between rabbit skeletal muscle F-actin and chicken gizzard heavy meromyosin (HMM), the direct contact between two HMM heads was demonstrated by using a zero-length cross-linker 1-ethyl-3-[3-(dimethylamino)propyl]maleimide (EDC) [Onishi, H., Maita, T., Matsuda, G., & Fujiwara, K. (1989) Biochemistry (preceding paper in this issue)]. Here, the 60K peptide which was a product of the EDC cross-linking between two 24K heavy chain (tryptic) fragments of HMM was further fragmented with cyanogen bromide, and the location of the cross-linking sites on the amino acid sequence of the HMM heavy chain was investigated. The result showed that one site resided within the 77-residue peptide region (residues 1-77) on one head of HMM, whereas the other site belonged to the 40-residue peptide region (residues 164-203) on the other head. This finding suggests that the two HMM heads are in contact with each other at different sites. Ultracentrifugal fractionation revealed that the head-to-head cross-linked gizzard HMM could be reversibly released from F-actin in the presence of Mg-ATP. The yield of the head-to-head cross-linking was not significantly changed with the acto-HMM complex between actin/HMM head molar ratios of 1 and 4, and it was very slightly decreased even at a molar ratio of 8, where HMM molecules were attached sparsely to actin filaments.(ABSTRACT TRUNCATED AT 250 WORDS)

The internal crosslinking of the S1 heavy chain from smooth muscle probed by dibromobimane

The reaction of the crosslinker dibromobimane has recently revealed a functionally important internal loop structure within the skeletal myosin S1 heavy chain where Cys-522 of the 50K domain and Cys-707 (SH1) of the 20K region are spatially juxtaposed. Here we have studied the possible relevance of this topological feature to the architecture and transducing activity of the myosin head in general, by extending the dibromobimane modification to smooth muscle myosin. Treatment of chicken gizzard myosin S1 with dibromobimane resulted in intramolecular crosslinking between the C-terminal 25K and central 50K segments of the S1 heavy chain. The data suggest a conservation at the 50K-25K interface of smooth muscle S1 heavy chain and the importance of the neighboring SH1 region, whose conformation may play an important role in energy transduction by the myosin head.

An intact heavy chain at the actin-subfragment 1 interface is required for ATPase activity of scallop myosin

Scallop S1 has a region sensitive to tryptic hydrolysis not found thus far in S1s of other species, located 65K from the N-terminus as determined by SDS/polyacrylamide-gel electrophoresis. In the presence of actin the S1 heavy chain is preferentially cleaved at this site. The high-salt EDTA and calcium ATPase activities of the nicked 65K-31K S1 are abolished. This inactivation is not due to denaturation, conformational effects of actin, or to light chain dissociation. The unique proteolytic site of scallop S1 is adjacent to a peptide involved in actin-S1 interaction in scallop and rabbit but it is far removed from the nucleotide-binding site in the linear amino acid sequence. We conclude that proteolysis inactivates the high-salt ATPase activities through a connection mediated by tertiary interactions. Such a connection provides a structural correlate for the known reciprocal relationship between the nucleotide and actin affinities of myosin.

Characterization of the fluorescein isothiocyanate-reactive site of gizzard myosin ATPase

We describe the reaction of fluorescein 5'-isothiocyanate with gizzard myosin, and investigate the effect of this fluorescent modification on ATPase activities. Changes in the ATPase activities upon modification occur rapidly, paralleling the reaction of 'fast reacting lysine residues' during the fast phase of the reaction. The loss in the ATPase activity is linearly correlated with the extent of modification. About 90% of the ATPase activity is lost with the incorporation of 2.6 mol of reagent per mol of myosin. The fluorescent label is mainly incorporated into the heavy chain of the myosin molecule. Using limited tryptic digestion of labeled S1, we have shown that the fluorescent dye remains in the 18 kDa fragment. The amino acid composition and the partial sequence of the peptide from the N-terminal end is presented. The results presented here suggest the participation of the 18 kDa peptide in the nucleotide binding domain of gizzard myosin.

Properties of the alkali light-chain-20-kilodalton fragment complex from skeletal myosin heads

We have developed a rapid and reproducible procedure widely applicable to the preparation of pure aqueous solutions of the complex between an alkali light chain and the COOH-terminal heavy-chain fragments of skeletal myosin chymotryptic subfragment 1 (S-1) split by various proteases. It was founded on the remarkable ethanol solubility of these complexes. A systematic study of the ethanol fractionation of the tryptic (27K-50K-20K)-S-1 (A2) showed the NH2-terminal 27K fragment to behave like a specific protein entity being quantitatively precipitated at a relatively low ethanol concentration. Only the 20K peptide-A2 complex remained in solution when the S-1 derivative was treated with exactly 4 volumes of ethanol in the presence of 6 M guanidinium chloride. At a lower ethanol concentration, a soluble mixture of 50K and 20K peptides together with the light chain was obtained. The isolated 20K fragment-A2 system containing a 1:1 molar ratio of each component was investigated by biochemical and 1H nuclear magnetic resonance (NMR) techniques to highlight its structure and the interaction of the 20K heavy-chain segment with F-actin and with the light chain. During the treatment of the complex with alpha-chymotrypsin, only the 20K peptide was fragmented in contrast to its stability within the whole S-1. The binding of F-actin to the complex led, however, to a strong inhibition of its chymotryptic degradation. 1-Ethyl-3-[3-(dimethylamino)propyl]carbodiimide cross-linking of F-actin to the complex produced covalent actin-20K peptide only, the amount of which was lower relative to that observed with the entire split S-1.(ABSTRACT TRUNCATED AT 250 WORDS)

Photoaffinity labelling of gizzard myosin with 3'-O-(4-benzoyl)-benzoic-adenosine 5'-triphosphate

The reaction of a photoaffinity analog, 3'-O-(4-benzoyl)-benzoic-adenosine 5'-triphosphate (BZ2ATP) with gizzard myosin is described. The incorporation of BZ2ATP into myosin is both specific and stoichiometric. About 2.2 mol BZ2ATP are incorporated/mol myosin resulting in the significant loss of EDTA(K+) ATPase activity. The Mg2+ and actin-activated ATPase activities are slightly inhibited. Addition of ATP (millimolar) during the photolysis reaction significantly inhibits incorporation of BZ2ATP into myosin. Our data show that the label is mainly incorporated into the heavy chain of myosin with some label in the 20-kDa light chain. Limited proteolysis of radioactively labeled myosin subfragment 1 with trypsin reveals the presence of radioactivity mainly in the 50-kDa fragment and some in the 29-kDa and 25-kDa fragments. However, our data on the ATP-sensitive incorporation of BZ2ATP into the tryptic fragments suggest that the 50-kDa peptide, not the 29-kDa peptide, may be located at or around the active site.

Localization and topography of antigenic domains within the heavy chain of smooth muscle myosin

We have produced and characterized monoclonal antibodies that label antigenic determinants distributed among three distinct, nonoverlapping peptide domains of the 200-kD heavy chain of avian smooth muscle myosin. Mice were immunized with a partially phosphorylated chymotryptic digest of adult turkey gizzard myosin. Hybridoma antibody specificities were determined by solid-phase indirect radioimmunoassay and immunoreplica techniques. Electron microscopy of rotary-shadowed samples was used to directly visualize the topography of individual [antibody.antigen] complexes. Antibody TGM-1 bound to a 50-kD peptide of subfragment-1 (S-1) previously found to be associated with actin binding and was localized by immunoelectron microscopy to the distal aspect of the myosin head. However, there was no antibody-dependent inhibition of the actin-activated heavy meromyosin ATPase, nor was antibody TGM-1 binding to actin-S-1 complexes inhibited. Antibody TGM-2 detected an epitope of the subfragment-2 (S-2) domain of heavy meromyosin but not the S-2 domain of intact myosin or rod, consistent with recognition of a site exposed by chymotryptic cleavage of the S-2:light meromyosin junction. Localization of TGM-2 to the carboxy-terminus of S-2 was substantiated by immunoelectron microscopy. Antibody TGM-3 recognized an epitope found in the light meromyosin portion of myosin. All three antibodies were specific for avian smooth muscle myosin. Of particular interest is that antibody TGM-1, unlike TGM-3, bound poorly to homogenates of 19-d embryonic smooth muscles. This indicates the expression of different myosin heavy chain epitopes during smooth muscle development.

Molecular movements promoted by metal nucleotides in the heavy-chain regions of myosin heads from skeletal muscle

Molecular movements generated in the heavy-chain regions (27-50-20(X 10(3)) Mr) of myosin S1 on interaction with nucleotides ATP, AMPPNP, ADP and PPi were investigated by limited proteolysis of several enzyme-metal nucleotide complexes in the absence and presence of reversibly bound and crosslinked F-actin. The rate and extent of the nucleotide-promoted conversion of the NH2-terminal 27 X 10(3) Mr and 50 X 10(3) Mr segments into products of 22 X 10(3) Mr and 45 X 10(3) Mr, respectively, were estimated to determine the amplitude of the molecular movements. The 22 X 10(3) Mr peptide was identified by amino acid sequence studies as being derived from cleavage of the peptide bond between Arg and Ile (at position 23 to 24). The 45 X 10(3) Mr peptide, previously shown to represent the NH2-terminal part of the 50 X 10(3) Mr region, would be connected to the adjacent C-terminal 20 X 10(3) Mr region by a pre-existing loop segment of about 5 X 10(3) Mr; the proteolytic sensitivity of the latter region is increased particularly by nucleotide binding. The tryptic reaction proved to be a sensitive indicator of the conformational state of the liganded heavy chain as the rate of peptide bond cleavage in the two regions is dependent on the nature of the bound ligand; it decreases in the order: ATP greater than AMPPNP greater than ADP greater than PPi. It depends also on the nature of the metal present, Mg2+ and Ca2+ being much more effective than K+. Binding of F-actin to the S1-MgAMPPNP complex affords significant protection against breakdown of 27 X 10(3) Mr and 50 X 10(3) Mr peptides, but with concomitant hydrolysis of the 50 X 10(3) Mr-20 X 10(3) Mr junction. Additionally, interaction of MgATP with HMM modulates the tryptic fission of the S1-S2 region. The overall data provide a molecular support for the two-state model of the myosin head and emphasize the involvement of the 50 X 10(3) Mr unit in the mechanism of coupling between the actin and nucleotide binding sites.

Dinitrophenylation of phosphorylated gizzard myosin

Chymotrypsin and papain digestion of 3H-labelled dinitrophenylated chicken gizzard myosin, pretreated with the myosin light chain catalyzed phosphorylating system, released a subfragment 1 devoid of its light chains but containing all of the label associated with the thiols of the heavy chain region. This was also the case when myosin was incubated in the presence of the phosphorylating system but without ATP. Dinitrophenylation of a reconstituted actomyosin made from phosphorylated myosin occurred mainly on -SH groups of the heavy chains, in contrast to the predominant modification of the light chains of myosin from a control actomyosin that was treated similarly. Conformational changes in myosin may govern, in part, actin-myosin interaction through the phosphorylation of the light chain of Mr 20.000.

Proteolysis and the domain organization of myosin subfragment 1

Because the proteolytic cleavage of a folded polypeptide depends not only on the specificity of the protease but on the nature of the folding, we investigated the cleavage of (chymotryptically produced) subfragment 1 (designated "S-1") or "head" segment of myosin by seven proteases with different specificities. All seven produced approximately the same three fragments of S-1--namely, fragments (from the NH2 terminus) of 27, 50, and 20 kilodaltons, suggesting that in intact S-1 these fragments are distinct domains. The same proteases were used to hydrolyze the MgADP complex of S-1. All failed to do so except trypsin, which, as found earlier [Hozumi, T. (1983) Biochemistry 22, 799-804], makes two additional cleavages. This result suggests that the conformational change induced by MgADP opens up only a small stretch of polypeptide chain, which stretch happens to be vulnerable to trypsin.

Selective cleavage of the connector segments within the myosin-S1 heavy chain by staphylococcal protease

The existence of the two connector segments linking the tryptic 50 kDa fragment of skeletal S1 heavy chain to the adjacent 27 kDa and 20 kDa peptides was ascertained by digestion of S1 with staphylococcal protease which was found to act specifically at these particular regions. Three new peptides of Mr 28000, 48000 and 22000 were produced and the novel S1 derivative formed had an intact actin-activated ATPase activity. Amino acid sequence analyses indicated that the 48 kDa and 22 kDa peptides overlap the two connector elements.