Detection and differentiation of cellulase components using low molecular mass fluorogenic substrates

Glycosyl hydrolases family 5, subfamily 5: Relevance and structural insights for designing improved biomass degrading cocktails

Endoglucanases are carbohydrate-degrading enzymes widely used for bioethanol production as part of the enzymatic cocktail. However, family 5 subfamily 5 (GH5_5) endoglucanases are still poorly explored in depth. The Trichoderma reesei representative is the most studied enzyme, presenting catalytic activity in acidic media and mild temperature conditions. Though biochemically similar, its modular structure and synergy with other components vary greatly compared to other GH5_5 members and there is still a lack of specific studies regarding their interaction with other cellulases and application on novel and better mixtures. In this regard, the threedimensional structure elucidation is a highly valuable tool to both uncover basic catalytic mechanisms and implement engineering techniques, proved by the high success rate GH5_5 endoglucanases show. GH5_5 enzymes must be carefully evaluated to fully uncover their potential in biomass-degrading cocktails: the optimal industrial conditions, synergy with other cellulases, structural studies, and enzyme engineering approaches. We aimed to provide the current understanding of these main topics, collecting all available information about characterized GH5_5 endoglucanases function, structure, and bench experiments, in order to suggest future directions to a better application of these enzymes in the industry.

Molecular recognition in the product site of cellobiohydrolase Cel7A regulates processive step length

Cellobiohydrolase Cel7A is an industrial important enzyme that breaks down cellulose by a complex processive mechanism. The enzyme threads the reducing end of a cellulose strand into its tunnel-shaped catalytic domain and progresses along the strand while sequentially releasing the disaccharide cellobiose. While some molecular details of this intricate process have emerged, general structure-function relationships for Cel7A remain poorly elucidated. One interesting aspect is the occurrence of particularly strong ligand interactions in the product binding site. In this work, we analyze these interactions in Cel7A from Trichoderma reesei with special emphasis on the Arg251 and Arg394 residues. We made extensive biochemical characterization of enzymes that were mutated in these two positions and showed that the arginine residues contributed strongly to product binding. Specifically, ∼50% of the total standard free energy of product binding could be ascribed to four hydrogen bonds to Arg251 and Arg394, which had previously been identified in crystal structures. Mutation of either Arg251 or Arg394 lowered production inhibition of Cel7A, but at the same time altered the enzyme product profile and resulted in ∼50% reduction in both processivity and hydrolytic activity. The position of the two arginine residues closely matches the two-fold screw axis symmetry of the substrate, and this energetically favors the productive enzyme-substrate complex. Our results indicate that the strong and specific ligand interactions of Arg251 and Arg394 provide a simple proofreading system that controls the step length during consecutive hydrolysis and minimizes dead time associated with transient, non-productive complexes.

Superior cellulolytic activity of Trichoderma guizhouense on raw wheat straw

Lignocellulosic plant biomass is the world's most abundant carbon source and has consequently attracted attention as a renewable resource for production of biofuels and commodity chemicals that could replace fossil resources. Due to its recalcitrant nature, it must be pretreated by chemical, physical or biological means prior to hydrolysis, introducing additional costs. In this paper, we tested the hypothesis that fungi which thrive on lignocellulosic material (straw, bark or soil) would be efficient in degrading untreated lignocellulose. Wheat straw was used as a model. We developed a fast and simple screening method for cellulase producers and tested one hundred Trichoderma strains isolated from wheat straw. The most potent strain-UB483FTG2/ TUCIM 4455, was isolated from substrate used for mushroom cultivation and was identified as T. guizhouense. After optimization of growth medium, high cellulase activity was already achieved after 72 h of fermentation on raw wheat straw, while the model cellulase overproducing strain T. reesei QM 9414 took 170 h and reached only 45% of the cellulase activity secreted by T. guizhouense. Maximum production levels were 1.1 U/mL (measured with CMC as cellulase substrate) and 0.7 U/mL (β-glucosidase assay). The T. guizhouense cellulase cocktail hydrolyzed raw wheat straw within 35 h. Our study shows that screening for fungi that successfully compete for special substrates in nature will lead to the isolation of strains with qualitatively and quantitatively superior enzymes needed for their digestion which could be used for industrial purposes.

Expression and secretion of fungal endoglucanase II and chimeric cellobiohydrolase I in the oleaginous yeast Lipomyces starkeyi

Background

Lipomyces starkeyi is one of the leading lipid-producing microorganisms reported to date; its genetic transformation was only recently reported. Our aim is to engineer L. starkeyi to serve in consolidated bioprocessing (CBP) to produce lipid or fatty acid-related biofuels directly from abundant and low-cost lignocellulosic substrates.

Results

To evaluate L. starkeyi in this role, we first conducted a genome analysis, which revealed the absence of key endo- and exocellulases in this yeast, prompting us to select and screen four signal peptides for their suitability for the overexpression and secretion of cellulase genes. To compensate for the cellulase deficiency, we chose two prominent cellulases, Trichoderma reesei endoglucanase II (EG II) and a chimeric cellobiohydrolase I (TeTrCBH I) formed by fusion of the catalytic domain from Talaromyces emersonii CBH I with the linker peptide and cellulose-binding domain from T. reesei CBH I. The systematically tested signal peptides included three peptides from native L. starkeyi and one from Yarrowia lipolytica. We found that all four signal peptides permitted secretion of active EG II. We also determined that three of these signal peptides worked for expression of the chimeric CBH I; suggesting that our design criteria for selecting these signal peptides was effective. Encouragingly, the Y. lipolytica signal peptide was able to efficiently guide secretion of the chimeric TeTrCBH I protein from L. starkeyi. The purified chimeric TeTrCBH I showed high activity against the cellulose in pretreated corn stover and the purified EG II showed high endocellulase activity measured by the CELLG3 (Megazyme) method.

Conclusions

Our results suggest that L. starkeyi is capable of expressing and secreting core fungal cellulases. Moreover, the purified EG II and chimeric TeTrCBH I displayed significant and potentially useful enzymatic activities, demonstrating that engineered L. starkeyi has the potential to function as an oleaginous CBP strain for biofuel production. The effectiveness of the tested secretion signals will also benefit future secretion of other heterologous proteins in L. starkeyi and, given the effectiveness of the cross-genus secretion signal, possibly other oleaginous yeasts as well.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-017-0742-5) contains supplementary material, which is available to authorized users.

Revisiting overexpression of a heterologous β-glucosidase in Trichoderma reesei: fusion expression of the Neosartorya fischeri Bgl3A to cbh1 enhances the overall as well as individual cellulase activities

Background

The filamentous fungus Trichoderma reesei has the capacity to secret large amounts of cellulase and is widely used in a variety of industries. However, the T. reesei cellulase is weak in β-glucosidase activity, which results in accumulation of cellobiose inhibiting the endo- and exo-cellulases. By expressing an exogenous β-glucosidase gene, the recombinant T. reesei cellulase is expected to degrade cellulose into glucose more efficiently.

Results

The thermophilic β-glucosidase NfBgl3A from Neosartorya fischeri is chosen for overexpression in T. reesei due to its robust activity. In vitro, the Pichia pastoris-expressed NfBgl3A aided the T. reesei cellulase in releasing much more glucose with significantly lower amounts of cellobiose from crystalline cellulose. The NfBgl3A gene was hence fused to the cbh1 structural gene and assembled between the strong cbh1 promoter and cbh1 terminator to obtain pRS-NfBgl3A by using the DNA assembler method. pRS-NfBgl3A was transformed into the T. reesei uridine auxotroph strain TU-6. Six positive transformants showed β-glucosidase activities of 2.3–69.7 U/mL (up to 175-fold higher than that of wild-type). The largely different β-glucosidase activities in the transformants may be ascribed to the gene copy numbers of NfBgl3A or its integration loci. The T. reesei-expressed NfBgl3A showed highly similar biochemical properties to that expressed in P. pastoris. As expected, overexpression of NfBgl3A enhanced the overall cellulase activity of T. reesei. The CBHI activity in all transformants increased, possibly due to the extra copies of cbh1 gene introduced, while the endoglucanase activity in three transformants also largely increased, which was not observed in any other studies overexpressing a β-glucosidase. NfBgl3A had significant transglycosylation activity, generating sophorose, a potent cellulase inducer, and other oligosaccharides from glucose and cellobiose.

Conclusions

We report herein the successful overexpression of a thermophilic N. fischeri β-glucosidase in T. reesei. In the same time, the fusion of NfBgl3A to the cbh1 gene introduced extra copies of the cellobiohydrolase 1 gene. As a result, we observed improved β-glucosidase and cellobiohydrolase activity as well as the overall cellulase activity. In addition, the endoglucanase activity also increased in some of the transformants. Our results may shed light on design of more robust T. reesei cellulases.

Cellulases: Classification, Methods of Determination and Industrial Applications

Microbial cellulases have been receiving worldwide attention, as they have enormous potential to process the most abundant cellulosic biomass on this planet and transform it into sustainable biofuels and other value added products. The synergistic action of endoglucanases, exoglucanases, and β-glucosidases is required for the depolymerization of cellulose to fermentable sugars for transformation in to useful products using suitable microorganisms. The lack of a better understanding of the mechanisms of individual cellulases and their synergistic actions is the major hurdles yet to be overcome for large-scale commercial applications of cellulases. We have reviewed various microbial cellulases with a focus on their classification with mechanistic aspects of cellulase hydrolytic action, insights into novel approaches for determining cellulase activity, and potential industrial applications of cellulases.

Reliable simultaneous zymographic method of characterization of cellulolytic enzymes from fungal cellulase complex

A method for zymographic detection of specific cellulases in a complex (endocellulase, exocellulase, and cellobiase) from crude fermentation extracts, after a single electrophoretic separation, is described in this paper. Cellulases were printed onto a membrane and, subsequently, substrate gel. Cellobiase isoforms were detected on the membrane using esculine as substrate, endocellulase isoforms on substrate gel with copolymerized carboxymethyl cellulose (CMC), while exocellulase isoforms were detected in electrophoresis gel with 4-methylumbelliferyl-β-d-cellobioside (MUC). This can be a useful additional tool for monitoring and control of fungal cellulase production in industrial processes and fundamental research, screening for particular cellulase producers, or testing of new lignocellulose substrates.

Effects of lytic polysaccharide monooxygenase oxidation on cellulose structure and binding of oxidized cellulose oligomers to cellulases

In nature, polysaccharide glycosidic bonds are cleaved by hydrolytic enzymes for a vast array of biological functions. Recently, a new class of enzymes that utilize an oxidative mechanism to cleave glycosidic linkages was discovered; these enzymes are called lytic polysaccharide monooxygenases (LPMO). These oxidative enzymes are synergistic with cocktails of hydrolytic enzymes and are thought to act primarily on crystalline regions, in turn providing new sites of productive attachment and detachment for processive hydrolytic enzymes. In the case of cellulose, the homopolymer of β-1,4-d-glucose, enzymatic oxidation occurs at either the reducing end or the nonreducing end of glucose, depending on enzymatic specificity, and results in the generation of oxidized chemical substituents at polymer chain ends. LPMO oxidation of cellulose is thought to produce either a lactone at the reducing end of glucose that can spontaneously or enzymatically convert to aldonic acid or 4-keto-aldose at the nonreducing end that may further oxidize to a geminal diol. Here, we use molecular simulation to examine the effect of oxidation on the structure of crystalline cellulose. The simulations highlight variations in behaviors depending on the chemical identity of the oxidized species and its location within the cellulose fibril, as different oxidized species introduce steric effects that disrupt local crystallinity and in some cases reduce the work needed for polymer decrystallization. Reducing-end oxidations are easiest to decrystallize when located at the end of the fibril, whereas nonreducing end oxidations readily decrystallize from internal cleavage sites despite their lower solvent accessibility. The differential in decrystallization free energy suggests a molecular mechanism consistent with experimentally observed LPMO/cellobiohydrolase synergy. Additionally, the soluble oxidized cellobiose products released by hydrolytic cellulases may bind to the active sites of cellulases with different affinities relative to cellobiose itself, which potentially affects hydrolytic turnover through product inhibition. To examine the effect of oxidation on cello-oligomer binding, we use thermodynamic integration to compute the relative change in binding free energy between the hydrolyzed and oxidized products in the active site of Family 7 and Family 6 processive glycoside hydrolases, Trichoderma reesei Cel7A and Cel6A, which are key industrial cellulases and commonly used model systems for fungal cellulases. Our results suggest that the equilibrium between the two reducing end oxidized products, favoring the linear aldonic acid, may increase product inhibition, which would in turn reduce processive substrate turnover. In the case of LMPO action at the nonreducing end, oxidation appears to lower affinity with the nonreducing end specific cellulase, reducing product inhibition and potentially promoting processive cellulose turnover. Overall, this suggests that oxidation of recalcitrant polysaccharides by LPMOs accelerates degradation not only by increasing the concentration of chain termini but also by reducing decrystallization work, and that product inhibition may be somewhat reduced as a result.

Purification and Characterization of Cellobiose Dehydrogenase from White-Rot BasidiomyceteTrametes hirsuta

In order to save energy during the pulp making process, we tried to use white-rot basidiomycete, Trametes hirsuta, which degrades lignin efficiently. But a decrease in paper strength caused by cellulolytic activity ruled this out for practical application. Since the cellulolytic activity of the fungus must be decreased, we purified and characterized a cellobiose dehydrogenase (CDH) that was reported to damage pulp fiber. The CDH in the culture filtrate of C. hirsutus was purified by freeze-thawing and chromatographic methods. The pI of the enzyme was 4.2 and its molecular weight was 92 kDa. The optimal temperature and pH of the enzyme were 60-70 degrees C and 5.0 respectively. Since the purified CDH decreased the viscosity of pulp in the presence of Fe(III) and cellobiose, it was shown that the suppression of CDH should be an effective way to reduce cellulose damage.

Engineering towards a complete heterologous cellulase secretome in Yarrowia lipolytica reveals its potential for consolidated bioprocessing

BACKGROUND

Yarrowia lipolytica is an oleaginous yeast capable of metabolizing glucose to lipids, which then accumulate intracellularly. However, it lacks the suite of cellulolytic enzymes required to break down biomass cellulose and cannot therefore utilize biomass directly as a carbon source. Toward the development of a direct microbial conversion platform for the production of hydrocarbon fuels from cellulosic biomass, the potential for Y. lipolytica to function as a consolidated bioprocessing strain was investigated by first conducting a genomic search and functional testing of its endogenous glycoside hydrolases. Once the range of endogenous enzymes was determined, the critical cellulases from Trichoderma reesei were cloned into Yarrowia.

RESULTS

Initially, work to express T. reesei endoglucanase II (EGII) and cellobiohydrolase (CBH) II in Y. lipolytica resulted in the successful secretion of active enzymes. However, a critical cellulase, T. reesei CBHI, while successfully expressed in and secreted from Yarrowia, showed less than expected enzymatic activity, suggesting an incompatibility (probably at the post-translational level) for its expression in Yarrowia. This result prompted us to evaluate alternative or modified CBHI enzymes. Our subsequent expression of a T. reesei-Talaromyces emersonii (Tr-Te) chimeric CBHI, Chaetomium thermophilum CBHI, and Humicola grisea CBHI demonstrated remarkably improved enzymatic activities. Specifically, the purified chimeric Tr-Te CBHI showed a specific activity on Avicel that is comparable to that of the native T. reesei CBHI. Furthermore, the chimeric Tr-Te CBHI also showed significant synergism with EGII and CBHII in degrading cellulosic substrates, using either mixed supernatants or co-cultures of the corresponding Y. lipolytica transformants. The consortia system approach also allows rational volume mixing of the transformant cultures in accordance with the optimal ratio of cellulases required for efficient degradation of cellulosic substrates.

CONCLUSIONS

Taken together, this work demonstrates the first case of successful expression of a chimeric CBHI with essentially full native activity in Y. lipolytica, and supports the notion that Y. lipolytica strains can be genetically engineered, ultimately by heterologous expression of fungal cellulases and other enzymes, to directly convert lignocellulosic substrates to biofuels.

Product inhibition of cellulases studied with 14C-labeled cellulose substrates

BACKGROUND

As a green alternative for the production of transportation fuels, the enzymatic hydrolysis of lignocellulose and subsequent fermentation to ethanol are being intensively researched. To be economically feasible, the hydrolysis of lignocellulose must be conducted at a high concentration of solids, which results in high concentrations of hydrolysis end-products, cellobiose and glucose, making the relief of product inhibition of cellulases a major challenge in the process. However, little quantitative information on the product inhibition of individual cellulases acting on cellulose substrates is available because it is experimentally difficult to assess the hydrolysis of the heterogeneous polymeric substrate in the high background of added products.

RESULTS

The cellobiose and glucose inhibition of thermostable cellulases from Acremonium thermophilum, Thermoascus aurantiacus, and Chaetomium thermophilum acting on uniformly 14C-labeled bacterial cellulose and its derivatives, 14C-bacterial microcrystalline cellulose and 14C-amorphous cellulose, was studied. Cellulases from Trichoderma reesei were used for comparison. The enzymes most sensitive to cellobiose inhibition were glycoside hydrolase (GH) family 7 cellobiohydrolases (CBHs), followed by family 6 CBHs and endoglucanases (EGs). The strength of glucose inhibition followed the same order. The product inhibition of all enzymes was relieved at higher temperatures. The inhibition strength measured for GH7 CBHs with low molecular-weight model substrates did not correlate with that measured with 14C-cellulose substrates.

CONCLUSIONS

GH7 CBHs are the primary targets for product inhibition of the synergistic hydrolysis of cellulose. The inhibition must be studied on cellulose substrates instead of on low molecular-weight model substrates when selecting enzymes for lignocellulose hydrolysis. The advantages of using higher temperatures are an increase in the catalytic efficiency of enzymes and the relief of product inhibition.

The chemistry of small-molecule fluorogenic probes

Chemical fluorophores find wide use in biology to detect and visualize different phenomena. A key advantage of small-molecule dyes is the ability to construct compounds where fluorescence is activated by chemical or biochemical processes. Fluorogenic molecules, in which fluorescence is activated by enzymatic activity, light, or environmental changes, enable advanced bioassays and sophisticated imaging experiments. Here, we detail the collection of fluorophores and highlight both general strategies and unique approaches that are employed to control fluorescence using chemistry.

Assessing cellulolysis in passive treatment systems for mine drainage: a modified enzyme assay

A modified cellulase enzyme assay was developed to monitor organic matter degradation in passive treatment systems for mine drainage. This fluorogenic substrate method facilitates assessment of exo-(1,4)-β-D-glucanase, endo-(1,4)-β-D-glucanase, and β-glucosidase, which compose an important cellulase enzyme system. The modified method was developed and refined using samples of organic carbon-amended mine tailings from field experiments where sulfate reduction was induced as a strategy for managing water quality. Sample masses (3 g) and the number of replicates ( ≥ 3) were optimized. Matrix interferences within these metal-rich samples were found to be insignificant. Application of this modified cellulase assay method provided insight into the availability and degradation of organic carbon within the amended tailings. Results of this study indicate that cellulase enzyme assays can be applied to passive treatment systems for mine drainage, which commonly contain elevated concentrations of metals.

Effects of low intensity ultrasound on cellulase pretreatment

This research was to explore the mechanism of ultrasonic impact on free cellulase activity and immobilize cellulase activities. The highest free cellulase activity was achieved when the sample was treated with low intensity ultrasound at 15 W, 24 kHz for 10 min, under which the enzyme activity was increased by 18.17% over the control. Fluorescence and CD spectra revealed that the ultrasonic treatment had increased the number of tryptophan on cellulase surface slightly, with the deformation of certain number of α-helix structure and increase of random coil content in cellulase protein. The highest immobilized cellulase activity was achieved when the sample was treated with low intensity ultrasound at 60 W, 24 kHz for 10 min, under which the enzyme activity was increased by 24.67% over the control. Scanning electron microscopy revealed that the ultrasonic treatment had increased the surface area of immobilized cellulase.

Purification and characterization of two thermostable xylanases from Malbranchea flava active under alkaline conditions

Two xylanases, MFX I and MFX II, from the thermophilic fungus Malbranchea flava MTCC 4889 with molecular masses of 25.2 and 30kDa and pIs of 4.5 and 3.7, respectively were purified to homogeneity. The xylanases were optimally active at pH 9.0 and at 60 degrees C, exhibited a half-life of 4h at 60 degrees C, and showed distinct mode of action and product profiles when applied to birchwood, oat spelt, and larchwood xylan, and to wheat and rye arabinoxylan. The xylanases were most active on larchwood xylan with K(m) values of 1.25 and 3.7mg/ml. K(cat)/K(m) values suggested that the xylanases preferentially hydrolyzed rye arabinoxylan. LC-MS/MS (liquid chromatography/mass spectrometry) analysis of tryptic digests of MFX I and MFX II revealed similarity with known fungal xylanases and suggests that that they belonged to the GH 11 and 10 glycosyl hydrolase super families, respectively. These xylanases can potentially be used in enzyme-assisted bleaching of the pulp derived from agro-residues, as well as production of xylooligosaccharides for pre-biotic functional food applications.

Cloning, expression, and characterization of novel thermostable family 7 cellobiohydrolases

As part of the effort to find better cellulases for bioethanol production processes, we were looking for novel GH-7 family cellobiohydrolases, which would be particularly active on insoluble polymeric substrates and participate in the rate-limiting step in the hydrolysis of cellulose. The enzymatic properties were studied and are reported here for family 7 cellobiohydrolases from the thermophilic fungi Acremonium thermophilum, Thermoascus aurantiacus, and Chaetomium thermophilum. The Trichoderma reesei Cel7A enzyme was used as a reference in the experiments. As the native T. aurantiacus Cel7A has no carbohydrate-binding module (CBM), recombinant proteins having the CBM from either the C. thermophilum Cel7A or the T. reesei Cel7A were also constructed. All these novel acidic cellobiohydrolases were more thermostable (by 4-10 degrees C) and more active (two- to fourfold) in hydrolysis of microcrystalline cellulose (Avicel) at 45 degrees C than T. reesei Cel7A. The C. thermophilum Cel7A showed the highest specific activity and temperature optimum when measured on soluble substrates. The most effective enzyme for Avicel hydrolysis at 70 degrees C, however, was the 2-module version of the T. aurantiacus Cel7A, which was also relatively weakly inhibited by cellobiose. These results are discussed from the structural point of view based on the three-dimensional homology models of these enzymes.

pH dependency of ligand binding to cellobiohydrolase 1 (Cel7A)

The affinity and enantioselectivity have been determined for designed propranolol derivatives as ligands for Cel7A by capillary electrophoresis (CE) at pH 7.0. These results have been compared to measurements at pH 5.0. In agreement with previous studies, the affinity increased at the higher pH. However, the affinity was not as dependent of the ligand structure at pH 7.0 as at pH 5.0, and the selectivity was generally decreased. Instead, at pH 7.0, the changes in binding were mainly dependent on the presence of additional dihydroxyl groups, indicating an increased importance of the electrostatic interactions. To evaluate the pH dependent variations in binding, changes in both the ligand and in the enzyme had to be taken into account. To ensure that the ligands had the same charge in all measurements, pKa-values of all compounds were determined. The ligand-protein interaction has also been studied by inhibition experiments at both pHs to evaluate the specific binding to the active site when competing with the substrate p-nitrophenyl lactoside (pNPL). With support of docking computations we propose a hypothesis on the effect of the ligand structure and pH dependency of the binding and selectivity of amino alcohols to Cel7A.

Outlook for cellulase improvement: screening and selection strategies

Cellulose is the most abundant renewable natural biological resource, and the production of biobased products and bioenergy from less costly renewable lignocellulosic materials is important for the sustainable development of human beings. A reduction in cellulase production cost, an improvement in cellulase performance, and an increase in sugar yields are all vital to reduce the processing costs of biorefineries. Improvements in specific cellulase activities for non-complexed cellulase mixtures can be implemented through cellulase engineering based on rational design or directed evolution for each cellulase component enzyme, as well as on the reconstitution of cellulase components. Here, we review quantitative cellulase activity assays using soluble and insoluble substrates, and focus on their advantages and limitations. Because there are no clear relationships between cellulase activities on soluble substrates and those on insoluble substrates, soluble substrates should not be used to screen or select improved cellulases for processing relevant solid substrates, such as plant cell walls. Cellulase improvement strategies based on directed evolution using screening on soluble substrates have been only moderately successful, and have primarily targeted improvement in thermal tolerance. Heterogeneity of insoluble cellulose, unclear dynamic interactions between insoluble substrate and cellulase components, and the complex competitive and/or synergic relationship among cellulase components limit rational design and/or strategies, depending on activity screening approaches. Herein, we hypothesize that continuous culture using insoluble cellulosic substrates could be a powerful selection tool for enriching beneficial cellulase mutants from the large library displayed on the cell surface.

Degradation of cellulose by the bean-pathogenic fungus Colletotrichum lindemuthianum. Production of extracellular cellulolytic enzymes by cellulose induction

Colletotrichum lindemuthianum was able to grow and produce extracellular cellulolytic activity in a defined medium containing cellulose as the main carbon substrate. As measured either by the hydrolysis of 4-methylumbelliferyl-beta-D -cellotrioside or the release of glucose from carboxymethylcellulose, activity reached a peak after 13 days of incubation and then declined whereas growth markedly increased afterwards. Detection of glucose in carboxymethylcellulose hydrolysates suggested the concerted operation of endo-1,4-beta-glucanase, cellobiohydrolase (exo-1,4-beta-glucanase) and beta-glucosidase activities. The highest levels of cellulolytic activity were obtained in media supplemented with cellulose and glutamate. Other carbon and nitrogen sources markedly influenced growth and enzyme production. Oligonucleotides homologous to specific regions of the cellobiohydrolase-encoding cbhII gene from Trichoderma reesei were used to isolate a C. lindemuthianum cbhII-DNA fragment whose sequence revealed homologies of 98% and 92% with the nucleotide and the deduced amino acid sequences of the corresponding cbhII-DNA of T. reesei, respectively. RT-PCR and Southern blot analyses of total RNA samples obtained from cellulose-grown but not from glucose-grown mycelium revealed the expression of the corresponding cbhII transcript. The cbhII-cDNA fragment was cloned and sequenced.

Inhibition of the Trichoderma reesei cellulases by cellobiose is strongly dependent on the nature of the substrate

The inhibition effect of cellobiose on the initial stage of hydrolysis when cellobiohydrolase Cel 7A and endoglucanases Cel 7B, Cel 5A, and Cel 12A from Trichoderma reesei were acting on bacterial cellulose and amorphous cellulose that were [(3)H]- labeled at the reducing end was quantified. The apparent competitive inhibition constant (K(i)) for Cel 7A on [(3)H]-bacterial cellulose was found to be 1.6 +/- 0.5 mM, 100-fold higher than that for Cel 7A acting on low-molecular-weight model substrates. The hydrolysis of [(3)H]-amorphous cellulose by endoglucanases was even less affected by cellobiose inhibition with apparent K(i) values of 11 +/- 3 mM and 34 +/- 6 mM for Cel 7B and Cel 5A, respectively. Contrary to the case for the other enzymes studied, the release of radioactive label by Cel 12A was stimulated by cellobiose, possibly due to a more pronounced transglycosylating activity. Theoretical analysis of the inhibition of Cel 7A by cellobiose predicted an inhibition analogous to that of mixed type with two limiting cases, competitive inhibition if the prevalent enzyme-substrate complex without inhibitor is productive and conventional mixed type when the prevalent enzyme-substrate complex is nonproductive.

Xylanases, xylanase families and extremophilic xylanases

Xylanases are hydrolytic enzymes which randomly cleave the beta 1,4 backbone of the complex plant cell wall polysaccharide xylan. Diverse forms of these enzymes exist, displaying varying folds, mechanisms of action, substrate specificities, hydrolytic activities (yields, rates and products) and physicochemical characteristics. Research has mainly focused on only two of the xylanase containing glycoside hydrolase families, namely families 10 and 11, yet enzymes with xylanase activity belonging to families 5, 7, 8 and 43 have also been identified and studied, albeit to a lesser extent. Driven by industrial demands for enzymes that can operate under process conditions, a number of extremophilic xylanases have been isolated, in particular those from thermophiles, alkaliphiles and acidiphiles, while little attention has been paid to cold-adapted xylanases. Here, the diverse physicochemical and functional characteristics, as well as the folds and mechanisms of action of all six xylanase containing families will be discussed. The adaptation strategies of the extremophilic xylanases isolated to date and the potential industrial applications of these enzymes will also be presented.

Two endoxylanases active and stable at alkaline pH from the newly isolated thermophilic fungus, Myceliophthora sp. IMI 387099

Two extra-cellular endoxylanases (Xyl Ia and Ib) were purified to homogeneity from the newly isolated thermophilic fungus, Myceliophthora sp. IMI 387099. Xyl Ia and Ib, having a molecular mass of approximately 53 kDa and pI of 5.2 and 4.8, respectively, were optimally active at 75 degrees C and at pH 6.0. They were stable at pH 9.2 at 60 degrees C for 2 h, but less stable at pH 6.0 and above 50 degrees C. Mg+2, Zn+2, Ca+2, Co+2 and DTT increased their activity by 1.5-3.0-folds, while SDS and NBS completely inhibited their activity. Both xylanases were active on pNPX and pNPC, but their activity on pNPC was three times higher than that on pNPX. Xyl Ia was more active than Xyl Ib on pNP-alpha-L-Arap, while the latter preferred pNP-alpha-L-Araf. Both xylanases showed two to four times higher activity on rye and wheat arabinoxylans than on birchwood xylan, but Xyl Ib was more active than Xyl Ia on oat spelt xylan. Wheat insoluble pentosan was a good substrate for Xyl Ia, while Xyl Ib preferred wheat soluble arabinoxylan. Xyl Ia had lower Km and higher kcat/Km ratios than Xyl Ib towards all three xylans tested. Both xylanases degraded X4-X6 in an endo-fashion and catalysed hydrolysis and trans-xylosylation reactions. HPLC and LC/MS analysis showed that Xyl Ia and Ib released the unsubstituted X2-X6 as well as mono and di-methyl glucuronic acid substituted X3 and X2 from arabinoxylans.

The relationship between thermal stability and pH optimum studied with wild-type and mutant Trichoderma reesei cellobiohydrolase Cel7A

The major cellulase secreted by the filamentous fungus Trichoderma reesei is cellobiohydrolase Cel7A. Its three-dimensional structure has been solved and various mutant enzymes produced. In order to study the potential use of T. reesei Cel7A in the alkaline pH range, the thermal stability of Cel7A was studied as a function of pH with the wild-type and two mutant enzymes using different spectroscopic methods. Tryptophan fluorescence and CD measurements of the wild-type enzyme show an optimal thermostability between pH 3.5-5.6 (Tm, 62 +/- 2 degrees C), at which the highest enzymatic activity is also observed, and a gradual decrease in the stability at more alkaline pH values. A soluble substrate, cellotetraose, was shown to stabilize the protein fold both at optimal and alkaline pH. In addition, unfolding of the Cel7A enzyme and the release of the substrate seem to coincide at both acidic and alkaline pH, demonstrated by a change in the fluorescence emission maximum. CD measurements were used to show that the five point mutations (E223S/A224H/L225V/T226A/D262G) that together result in a more alkaline pH optimum [Becker, D., Braet, C., Brumer, H., III, Claeyssens, M., Divne, C., Fagerström, R.B., Harris, M., Jones, T.A., Kleywegt, G.J., Koivula, A., et al. (2001) Biochem. J.356, 19-30], destabilize the protein fold both at acidic and alkaline pH when compared with the wild-type enzyme. In addition, an interesting time-dependent fluorescence change, which was not observed by CD, was detected for the pH mutant. Our data show that in order to engineer more alkaline pH cellulases, a combination of mutations should be found, which both shift the pH optimum and at the same time improve the thermal stability at alkaline pH range.

Beta-glucosidase from the grape native yeast Debaryomyces vanrijiae: purification, characterization, and its effect on monoterpene content of a Muscat grape juice

Six hundred ten yeast colonies isolated from various vineyards in Chile were screened for the presence of a beta-glucosidase activity as well as the resistance to glucose and ethanol inhibition. Among them, Debaryomyces vanrijiae was found to produce high levels of an extracelular beta-glucosidase which was tolerant to glucose (K(i) = 439 mM) and ethanol inhibitions. The enzyme (designated DV-BG) was purified to apparent homogeneity, respectively, by gel filtration, ion-exchange, and chromatofocusing techniques. Its molecular weight was 100 000, and its pI 3.0, optimum pH, and temperature activities were 5.0 and 40 degrees C, respectively, and had a V(max) of 47.6 micromol min(-)(1) mg(-)(1) and a K(m) of 1.07 mM. The enzyme was active against different beta-d-glucosides including glucosidic flavor precursors. The disaccharidic flavor precursors were not substrates for the enzyme. When added to a Muscat grape juice, the concentration of several monoterpenes increased as the consequence of its hydrolytic activity.

Enzymatic properties of the low molecular mass endoglucanases Cel12A (EG III) and Cel45A (EG V) of Trichoderma reesei

Trichoderma reesei produces five known endoglucanases. The most studied are Cel7B (EG I) and Cel5A (EG II) which are the most abundant of the endoglucanases. We have performed a characterisation of the enzymatic properties of the less well-studied endoglucanases Cel12A (EG III), Cel45A (EG V) and the catalytic core of Cel45A. For comparison, Cel5A and Cel7B were included in the study. Adsorption studies on microcrystalline cellulose (Avicel) and phosphoric acid swollen cellulose (PASC) showed that Cel5A, Cel7B, Cel45A and Cel45Acore adsorbed to these substrates. In contrast, Cel12A adsorbed weakly to both Avicel and PASC. The products formed on Avicel, PASC and carboxymethylcellulose (CMC) were analysed. Cel7B produced glucose and cellobiose from all substrates. Cel5A and Cel12A also produced cellotriose, in addition to glucose and cellobiose, on the substrates. Cel45A showed a clearly different product pattern by having cellotetraose as the main product, with practically no glucose and cellobiose formation. The kinetic constants were determined on cellotriose, cellotetraose and cellopentaose for the enzymes. Cel12A did not hydrolyse cellotriose. The k(Cat) values for Cel12A on cellotetraose and cellopentaose were significantly lower compared with Cel5A and Cel7B. Cel7B was the only endoglucanase which rapidly hydrolysed cellotriose. Cel45Acore did not show activity on any of the three studied cello-oligosaccharides. The four endoglucanases' capacity to hydrolyse beta-glucan and glucomannan were studied. Cel12A hydrolysed beta-glucan and glucomannan slightly less compared with Cel5A and Cel7B. Cel45A was able to hydrolyse glucomannan significantly more compared with beta-glucan. The capability of Cel45A to hydrolyse glucomannan was higher than that observed for Cel12A, Cel5A and Cel7B. The results indicate that Cel45A is a glucomannanase rather than a strict endoglucanase.

Kinetic parameters and mode of action of the cellobiohydrolases produced by Talaromyces emersonii

Three forms of cellobiohydrolase (EC 3.2.1.91), CBH IA, CBH IB and CBH II, were isolated to apparent homogeneity from culture filtrates of the aerobic fungus Talaromyces emersonii. The three enzymes are single sub-unit glycoproteins, and unlike most other fungal cellobiohydrolases are characterised by noteworthy thermostability. The kinetic properties and mode of action of each enzyme against polymeric and small soluble oligomeric substrates were investigated in detail. CBH IA, CBH IB and CBH II catalyse the hydrolysis of microcrystalline cellulose, albeit to varying extents. Hydrolysis of a soluble cellulose derivative (CMC) and barley 1,3;1,4-beta-D-glucan was not observed. Cellobiose (G2) is the main reaction product released by CBH IA, CBH IB, and CBH II from microcrystalline cellulose. All three CBHs are competitively inhibited by G2; inhibition constant values (K(i)) of 2.5 and 0.18 mM were obtained for CBH IA and CBH IB, respectively (4-nitrophenyl-beta-cellobioside as substrate), while a K(i) of 0.16 mM was determined for CBH II (2-chloro-4-nitrophenyl-beta-cellotrioside as substrate). Bond cleavage patterns were determined for each CBH on 4-methylumbelliferyl derivatives of beta-cellobioside and beta-cellotrioside (MeUmbG(n)). While the Tal. emersonii CBHs share certain properties with their counterparts from Trichoderma reesei, Humicola insolens and other fungal sources, distinct differences were noted.

Characterization of Trichoderma reesei cellobiohydrolase Cel7A secreted from Pichia pastoris using two different promoters

Heterologous expression of T. reesei cellobiohydrolase Cel7A in a methylotrophic yeast Pichia pastoris was tested both under the P. pastoris alcohol oxidase (AOX1) promoter and the glyceraldehyde-3-phosphate dehydrogenase (GAP) promoter in a fermentor. Production of Cel7A with the AOX1 promoter gave a better yield, although part of the enzyme expressed was apparently not correctly folded. Cel7A expressed in P. pastoris is overglycosylated at its N-glycosylation sites as compared to the native T. reesei protein, but less extensive than Cel7A expressed in Saccharomyces cerevisiae. The k(cat) and K(m) values for the purified protein on soluble substrates are similar to the values found for the native Trichoderma Cel7A, whereas the degradation rate on crystalline substrate (BMCC) is somewhat reduced. The measured pH optimum also closely resembles that of purified T. reesei Cel7A. Furthermore, the hyperglycosylation does not affect the thermostability of the enzyme monitored with tryptophane fluorescence and activity measurements. On the other hand, CD measurements indicate that the formation of disulfide bridges is an important step in the correct folding of Cel7A and might explain the difficulties encountered in heterologous expression of T. reesei Cel7A. The constitutive GAP promoter expression system of P. pastoris is nevertheless well suited for activity screening of cellulase activities in microtiter plates. With this type of screening method a faster selection of site-directed and random mutants with, for instance, an altered optimum pH is possible, in contrast to the homologous T. reesei expression system.

Purification and properties of three endo-beta-1,4-xylanases produced by Streptomyces sp. strain S38 which differ in their ability to enhance the bleaching of kraft pulps*(2)

In the presence of xylan, Streptomyces sp. strain S38 secretes three xylanases (Xyl1, Xyl2, and Xyl3) that were purified to protein homogeneity and characterized. When used in bleach boosting tests on kraft hardwood and softwood, Xyl1, a family-11 enzyme, was more effective than Xyl2 and Xyl3 that belonged to family-10. Xyl1 was fully responsible for the biodelignification potential of the culture supernatants with a minimal effective amount of 10 IU per gram of dry pulp for both softwood and hardwood pulp. Complete conventional CEDED bleaching sequences showed that enzymatic pretreatment (20 IU/g dry pulp) could result in active chlorine savings of 8.6 and 4.9 kg/ton of dry pulp with hardwood and softwood, respectively. The purified enzymes were totally devoid of cellulase activity on CM-cellulose and their activities were optimal at about 60 degrees C and pH 6. Moreover, the V(max) value of Xyl1 at 50 degrees C measured on birchwood xylan (5,700 µmoles/min/mg prot.) was significantly higher than those of Xyl2 and Xyl3 whereas their K(m) values were similar. Their half-lives at 50 degrees C were larger than 16 h but sharply decreased at 60 degrees C where the family-11 Xyl1 was less stable (t(1/2)(60 degrees C) = 10 min) than both family-10 enzymes Xyl2 (t(1/2)(60 degrees C) = 30 min) and Xyl3 (t(1/2)(60 degrees C) = 70 min).

Endo-beta-1,4-xylanase families: differences in catalytic properties

Microbial endo-beta-1,4-xylanases (EXs, EC 3.2.1.8) belonging to glycanase families 10 (formerly F) and 11 (formerly G) differ in their action on 4-O-methyl-D-glucurono-D-xylan and rhodymenan, a beta-1,3-beta-1,4-xylan. Two high molecular mass EXs (family 10), the Cryptococcus albidus EX and XlnA of Streptomyces lividans, liberate from glucuronoxylan aldotetrauronic acid as the shortest acidic fragment, and from rhodymenan an isomeric xylotriose of the structure Xyl beta 1-3Xyl beta 1-4Xyl as the shortest fragment containing a beta-1,3-linkage. Low molecular mass EXs (family 11), such as the Trichoderma reesei enzymes and XlnB and XlnC of S. lividans, liberate from glucuronoxylan an aldopentauronic acid as the shortest fragment, and from rhodymenan an isomeric xylotetraose as the shortest fragment containing a beta-1,3-linkage. The structure of the oligosaccharides was established by: NMR spectroscopy, mass spectrometry of per-O-methylated compounds and enzymic hydrolysis by beta-xylosidase and EX, followed by analysis of products by chromatography. The structures of the fragments define in the polysaccharides the linkages attacked and non-attacked by the enzymes. EXs of family 10 require a lower number of unsubstituted consecutive beta-1,4-xylopyranosyl units in the main chain and a lower number of consecutive beta-1,4-xylopyranosyl linkages in rhodymenan than EXs of family 11. These results, together with a greater catalytic versatility of EXs of family 10, suggest that EXs of family 10 have substrate binding sites smaller than those of EXs of family 11. This suggestion is in agreement with the finding that EXs of family 10 show higher affinity for shorter linear beta-1,4-xylooligosaccharides than EXs of family 11. The results are discussed with relevant literature data to understand better the structure-function relationship in this group of glycanases.

Cloning, sequencing, and heterologous expression of a cellulase-encoding cDNA (cbh1) from Penicillium janthinellum

From a Penicillium janthinellum cDNA library, two clones with 1.8- and 1.9-kb inserts were isolated by hybridization to a Trichoderma reesei cellulase-encoding gene probe (egl1). Both cDNAs have identical 5' ends and coding sequences, but different polyadenylation start points in their 3' untranslated regions. In the nucleotide (nt) sequence, one open reading frame of 537 amino acids was detected which shows 56% homology with endoglucanase I of T. reesei and 70% homology with cellobiohydrolase I of T. reesei, Phanerochaete chrysosporium, and Humicola grisea. Expression of the 1.9-kb cDNA in the Escherichia coli T7 system led to the detection of a 57-kDa protein, in agreement with the theoretical value. Fusion to the promoter of the yeast phosphoglycerokinase-encoding gene led to efficient expression and partial secretion of the cDNA-encoded cellulase with cellobiohydrolase I activity in Saccharomyces cerevisiae.