Purification of the inducible alpha-agglutinin of S. cerevisiae and molecular cloning of the gene

Discovering the secrets of the Candida albicans agglutinin-like sequence (ALS) gene family--a sticky pursuit

The agglutinin-like sequence (ALS) family of Candida albicans includes eight genes that encode large cell-surface glycoproteins. The high degree of sequence relatedness between the ALS genes and the tremendous allelic variability often present in the same C. albicans strain complicated definition and characterization of the gene family. The main hypothesis driving ALS family research is that the genes encode adhesins, primarily involved in host-pathogen interactions. Although adhesive function has been demonstrated for several Als proteins, the challenge of studying putative adhesins in a highly adhesive organism like C. albicans has led to varying ideas about how best to pursue such investigations, and results that are sometimes contradictory. Recent analysis of alsdelta/alsdelta strains suggested roles for Als proteins outside of adhesion to host surfaces, and a broader scope of Als protein function than commonly believed. The availability and use of experimental methodologies to study C. albicans at the genomic level, and the ALS family en masse, have advanced knowledge of these genes and emphasized their importance in C. albicans biology and pathogenesis.

Reducing haziness in white wine by overexpression of Saccharomyces cerevisiae genes YOL155c and YDR055w

Grape proteins aggregate in white wine to form haze. A novel method to prevent haze in wine is the use of haze protective factors (Hpfs), specific mannoproteins from Saccharomyces cerevisiae, which reduce the particle size of the aggregated proteins. Hpf1p was isolated from white wine and Hpf2p from a synthetic grape juice fermentation. Putative structural genes, YOL155c and YDR055w, for these proteins were identified from partial amino acid sequences of Hpf1p and Hpf2p, respectively. YOL155c also has a homologue, YIL169c, in S. cerevisiae. Comparison of the partial amino acid sequence of deglycosylated-Hpf2p with the deduced protein sequence of YDR055w, confirmed five of the 15 potential N-linked glycosylation sites in this sequence were occupied. Methylation analysis of the carbohydrate moieties of Hpf2p indicated that this protein contained both N- and O-linked mannose chains. Material from fermentation supernatant of deletion strains had significantly less activity than the wild type. Moreover, YOL155c and YIL169c overexpressing strains and a strain overexpressing 6xHis-tagged Hpf2p produced greater haze protective activity than the wild type strains. A storage trial demonstrated the short to midterm stability of 6xHis-tagged Hpf2p in wine.

Candida albicans Als3p is required for wild-type biofilm formation on silicone elastomer surfaces

Candida albicans ALS3 encodes a large cell-surface glycoprotein that has adhesive properties. Immunostaining of cultured C. albicans germ tubes showed that Als3p is distributed diffusely across the germ tube surface. Two-photon laser scanning microscopy of model catheter biofilms grown using a PALS3-green fluorescent protein (GFP) reporter strain showed GFP production in hyphae throughout the biofilm structure while biofilms grown using a PTPI1-GFP reporter strain showed GFP in both hyphae and yeast-form cells. Model catheter biofilms formed by an als3 Delta/als3 Delta strain were weakened structurally and had approximately half the biomass of a wild-type biofilm. Reintegration of a wild-type ALS3 allele restored biofilm mass and wild-type biofilm structure. Production of an Als3p-Ag alpha 1p fusion protein under control of the ALS3 promoter in the als3 Delta/als3 Delta strain restored some of the wild-type biofilm structural features, but not the wild-type biofilm mass. Despite its inability to restore wild-type biofilm mass, the Als3p-Ag alpha 1p fusion protein mediated adhesion of the als3 Delta/als3 Delta C. albicans strain to human buccal epithelial cells (BECs). The adhesive role of the Als3p N-terminal domain was further demonstrated by blocking adhesion of C. albicans to BECs with immunoglobulin reactive against the Als3p N-terminal sequences. Together, these data suggest that portions of Als3p that are important for biofilm formation may be different from those that are important in BEC adhesion, and that Als3p may have multiple functions in biofilm formation. Overexpression of ALS3 in an efg1 Delta/efg1 Delta strain that was deficient for filamentous growth and biofilm formation resulted in growth of elongated C. albicans cells, even under culture conditions that do not favour filamentation. In the catheter biofilm model, the ALS3 overexpression strain formed biofilm with a mass similar to that of a wild-type control. However, C. albicans cells in the biofilm had yeast-like morphology. This result uncouples the effect of cellular morphology from biofilm formation and underscores the importance of Als3p in biofilm development on silicone elastomer surfaces.

ALS3 and ALS8 represent a single locus that encodes a Candida albicans adhesin; functional comparisons between Als3p and Als1p

The ALS (agglutinin-like sequence) gene family of Candida albicans encodes eight cell-surface glycoproteins, some of which are involved in adherence to host surfaces. A mutational analysis of each ALS gene is currently being performed to deduce the functions of the encoded proteins and to better understand the role of these proteins in C. albicans biology and pathogenesis. This paper describes construction of an als3/als3 mutant and comparison of its phenotype to an als1/als1 strain. Efforts to disrupt ALS3 indicated that the gene could be deleted in two transformation steps, suggesting that the gene is encoded by a single locus and that the ALS3-like locus, ALS8, does not exist. Strains lacking ALS3 or ALS1 did not exhibit a defect in germ tube formation when grown in RPMI 1640 medium, but the als1/als1 mutant formed significantly fewer germ tubes in Lee medium. Analysis of ALS3 and ALS1 promoter activity using green fluorescent protein (GFP) reporter strains and flow cytometry showed that when cells are placed into medium that promotes germ tube formation, ALS1 is transcribed prior to ALS3. Comparison of the mutant strains in adhesion assays showed that the als3/als3 strain was defective in adhesion to both human umbilical vein endothelial cells (HUVEC) and buccal epithelial cells (BEC), but not to fibronectin-coated plastic plates. In contrast, the als1/als1 strain showed decreased adherence to HUVEC, but adherence to BEC and fibronectin were the same as wild-type controls. Inoculation of the buccal reconstituted human epithelium (RHE) model of oral candidiasis with the mutant strains showed nearly a total lack of adhesion and epithelial destruction by the als3/als3 mutant while the als1/als1 strain showed only a slightly reduced degree of epithelial destruction compared to the wild-type control. Adhesion data presented here suggest that, in the assays performed, loss of Als3p affects C. albicans adhesion more than loss of Als1p. Collectively, these results demonstrate functional similarities and differences between Als1p and Als3p, and suggest the potential for more complex interrelationships between the ALS genes and their encoded proteins.

Environmentally induced reversible conformational switching in the yeast cell adhesion protein alpha-agglutinin

The yeast cell adhesion protein alpha-agglutinin is expressed on the surface of a free-living organism and is subjected to a variety of environmental conditions. Circular dichroism (CD) spectroscopy shows that the binding region of alpha-agglutinin has a beta-sheet-rich structure, with only approximately 2% alpha-helix under native conditions (15-40 degrees C at pH 5.5). This region is predicted to fold into three immunoglobulin-like domains, and models are consistent with the CD spectra as well as with peptide mapping and site-specific mutagenesis. However, secondary structure prediction algorithms show that segments comprising approximately 17% of the residues have high alpha-helical and low beta-sheet potential. Two model peptides of such segments had helical tendencies, and one of these peptides showed pH-dependent conformational switching. Similarly, CD spectroscopy of the binding region of alpha-agglutinin showed reversible conversion from beta-rich to mixed alpha/beta structure at elevated temperatures or when the pH was changed. The reversibility of these changes implied that there is a small energy difference between the all-beta and the alpha/beta states. Similar changes followed cleavage of peptide or disulfide bonds. Together, these observations imply that short sequences of high helical propensity are constrained to a beta-rich state by covalent and local charge interactions under native conditions, but form helices under non-native conditions.

Delineation of functional regions within the subunits of the Saccharomyces cerevisiae cell adhesion molecule a-agglutinin

a-Agglutinin from Saccharomyces cerevisiae is a cell adhesion glycoprotein expressed on the surface of cells of a mating type and consists of an anchorage subunit Aga1p and a receptor binding subunit Aga2p. Cell wall attachment of Aga2p is mediated through two disulfide bonds to Aga1p (Cappellaro, C., Baldermann, C., Rachel, R., and Tanner, W. (1994) EMBO J. 13, 4737-4744). We report here that purified Aga2p was unstable and had low molar specific activity relative to its receptor alpha-agglutinin. Aga2p co-expressed with a 149-residue fragment of Aga1p formed a disulfide-linked complex with specific activity 43-fold higher than Aga2p expressed alone. Circular dichroism of the complex revealed a mixed alpha/beta structure, whereas Aga2p alone had no periodic secondary structure. A 30-residue Cys-rich Aga1p fragment was partially active in stabilization of Aga2p activity. Mutation of either or both Aga2p cysteine residues eliminated stabilization of Aga2p. Thus the roles of Aga1p include both cell wall anchorage and cysteine-dependent conformational restriction of the binding subunit Aga2p. Mutagenesis of AGA2 identified only C-terminal residues of Aga2p as being essential for binding activity. Aga2p residues 45-72 are similar to sequences in soybean Nod genes, and include residues implicated in interactions with both Aga1p (including Cys(68)) and alpha-agglutinin.

The ALS gene family of Candida albicans

The ALS gene family of Candida albicans encodes large cell-surface glycoproteins that are implicated in the process of adhesion to host surfaces. ALS genes are also found in other Candida species that are isolated from cases of clinical disease. Genes in the ALS family are differentially regulated by physiologically relevant mechanisms. ALS genes exhibit several levels of variability including strain- and allele-specific size differences for the same gene, strain-specific differences in gene regulation, the absence of particular ALS genes in certain isolates, and additional ALS coding regions in others. The differential regulation and genetic variability of the ALS genes results in a diverse cell-surface Als protein profile that is also affected by growth conditions. The ALS genes are one example of a gene family associated with pathogenicity mechanisms in C. albicans and other Candida species.

Establishment of a simple system to analyse the molecular interaction in the agglutination of Saccharomyces cerevisiae

Saccharomyces cerevisiae a-agglutinin, which is involved in mating and covalently anchoring to the cell wall, consists of two components, Aga1p and Aga2p, whose syntheses are individually regulated. To facilitate the analysis of the protein-protein interaction on agglutination between a- and alpha-agglutinins, the construction of a yeast strain (MATa) with the functional protein prepared by genetic fusion of Aga1p- and Aga2p-encoding genes and by the expression system using the UPR-ICL promoter derived from the n-alkane-assimilating yeast, Candida tropicalis, which is functional under the condition of lower glucose concentration was tried and the agglutination ability of the constructed strain was evaluated with a yeast strain (MATa) which expressed AGalpha1 encoding alpha-agglutinin under the control of the same promoter. The genes were integrated into the yeast chromosomes. Cell agglutination between both (MATa) strains was observed microscopically when these two strains were mix-cultured to a glucose-decreased concentration. The agglutination was further confirmed by the sedimentation test and by the quantification using a filter. These results proved that the constructed Aga1p-Aga2p fusion protein was enoughly functional for the interaction with the Agalpha1 protein, and that this phenomenon occurred dependent on glucose concentration, but independent of the peptide pheromones secreted by the cells of the opposite mating types. Using this system, the role of two disulphide linkages between Aga1p and Aga2p on the binding activity between Aga2p and Aga1p was first evaluated. Under the treatment by the SH-compound (dithiothreitol), in which Agalpha2p is easily released into the medium from the intact cell surface, the Aga1p and Aga2p fusion protein was a good tool to make clear the role of the disulphide linkages. As a result, the linkages had a significant effect on not only the assembly but also the binding activity. The novel and simple system described here may further facilitate the study of molecular interaction in agglutination.

Identification of Candida albicans ALS2 and ALS4 and localization of als proteins to the fungal cell surface

Additional genes in the growing ALS family of Candida albicans were isolated by PCR screening of a genomic fosmid library with primers designed from the consensus tandem-repeat sequence of ALS1. This procedure yielded fosmids encoding ALS2 and ALS4. ALS2 and ALS4 conformed to the three-domain structure of ALS genes, which consists of a central domain of tandemly repeated copies of a 108-bp motif, an upstream domain of highly conserved sequences, and a domain of divergent sequences 3' of the tandem repeats. Alignment of five predicted Als protein sequences indicated conservation of N- and C-terminal hydrophobic regions which have the hallmarks of secretory signal sequences and glycosylphosphatidylinositol addition sites, respectively. Heterologous expression of an N-terminal fragment of Als1p in Saccharomyces cerevisiae demonstrated function of the putative signal sequence with cleavage following Ala17. This signal sequence cleavage site was conserved in the four other Als proteins analyzed, suggesting identical processing of each protein. Primary-structure features of the five Als proteins suggested a cell-surface localization, which was confirmed by indirect immunofluorescence with an anti-Als antiserum. Staining was observed on mother yeasts and germ tubes, although the intensity of staining on the mother yeast decreased with elongation of the germ tube. Similar to other ALS genes, ALS2 and ALS4 were differentially regulated. ALS4 expression was correlated with the growth phase of the culture; ALS2 expression was not observed under many different in vitro growth conditions. The data presented here demonstrate that ALS genes encode cell-surface proteins and support the conclusion that the size and number of Als proteins on the C. albicans cell surface vary with strain and growth conditions.

Expression of YWP1, a gene that encodes a specific Yarrowia lipolytica mycelial cell wall protein, in Saccharomyces cerevisiae

The YWP1 gene encoding a specific mycelial cell wall protein of Yarrowia lipolytica has been cloned and expressed in Saccharomyces cerevisiae using different episomal plasmids. Because the plasmids pYAE35BB and pYAE35ES carrying the YWP1 gene (including the 5' noncoding promoter sequences) failed to express it, the YWP1 gene was cloned under the control of GAL/CYC or ACT S. cerevisiae promoters. A main band with an apparent molecular mass of 70 kDa was detected by immunoblotting in the cell wall fraction of transformants. Ywp1 processing and incorporation to the cell wall were similar in both Y. lipolytica and S. cerevisiae but not in its final localization in the cell wall. In Y. lipolytica Ywp1 is covalently bound to the cell wall (it is released only by Zymolyase digestion), whereas in S. cerevisiae it was not (it was released by boiling SDS solutions). These results suggest that the sequences involved in recognition, anchoring of a protein to the cell wall, or the catalytic activities implicated are different, at least for Ywp1, in Y. lipolytica and S. cerevisiae. Another possibility is that the target for attachment of Ywp1 is missing or cryptic in the cell wall of S. cerevisiae.

Specific labelling of cell wall proteins by biotinylation. Identification of four covalently linked O-mannosylated proteins of Saccharomyces cerevisiae

Intact Saccharomyces cerevisiae cells were biotinylated with the non-permeable sulfosuccinimidyl-6-(biotinamido) hexanoate reagent. Twenty specifically labelled cell wall proteins would be extracted and visualized on SDS gels via streptavidin/horseradish peroxidase. Nine cell wall proteins were released by SDS extraction under reducing conditions and were designated Scw1-9p for (soluble cell wall proteins); five proteins were released from SDS-extracted cell walls by laminarinase (Ccw1-5p for covalently linked cell wall proteins) and six with mild (30 mM-NaOH, 4 degrees C, 14 h) alkali treatment (Ccw6-11p). N-terminal sequences of the Ccw proteins 6, 7, 8 and 11 showed that these cell wall proteins are members of the PIR gene family (predicted proteins with internal repeats), CCW6 being identical to PIR1 and CCW8 to PIR3. Single gene disruptions of all four genes did not yield a phenotype. In the CCW11 disruption the Ccw11p as well as the laminarinase-extracted Ccw5 protein was missing. The new cell wall proteins are O-mannosylated, contain a Kex2 processing site, but no C-terminal GPI anchor sequence.

FLO11, a yeast gene related to the STA genes, encodes a novel cell surface flocculin

We report the characterization of a gene encoding a novel flocculin related to the STA genes of yeast, which encode secreted glucoamylase. The STA genes comprise sequences that are homologous to the sporulation-specific glucoamylase SGA and to two other sequences, S2 and S1. We find that S2 and S1 are part of a single gene which we have named FLO11. The sequence of FLO11 reveals a 4,104-bp open reading frame on chromosome IX whose predicted product is similar in overall structure to the class of yeast serine/threonine-rich GPI-anchored cell wall proteins. An amino-terminal domain containing a signal sequence and a carboxy-terminal domain with homology to GPI (glycosyl-phosphatidyl-inositol) anchor-containing proteins are separated by a central domain containing a highly repeated threonine- and serine-rich sequence. Yeast cells that express FLO11 aggregate in the calcium-dependent process of flocculation. Flocculation is abolished when FLO11 is disrupted. The product of STA1 also is shown to have flocculating activity. When a green fluorescent protein fusion of FLO11 was expressed from the FLO11 promoter on a single-copy plasmid, fluorescence was observed in vivo at the periphery of cells. We propose that FLO11 encodes a flocculin because of its demonstrated role in flocculation, its structural similarity to other members of the FLO gene family, and the cell surface location of its product. FLO11 gene sequences are present in all yeast strains tested, including all standard laboratory strains, unlike the STA genes which are present only in the variant strain Saccharomyces cerevisiae var. diastaticus. FLO11 differs from all other yeast flocculins in that it is located near a centromere rather than a telomere, and its expression is regulated by mating type. Repression of FLO11-dependent flocculation in diploids is conferred by the mating-type repressor al/alpha2.

Identification of a ligand-binding site in an immunoglobulin fold domain of the Saccharomyces cerevisiae adhesion protein alpha-agglutinin

The Saccharomyces cerevisiae adhesion protein alpha-agglutinin (Ag alpha 1p) is expressed by alpha cells and binds to the complementary a-agglutinin expressed by a cells. The N-terminal half of alpha-agglutinin is sufficient for ligand binding and has been proposed to contain an immunoglobulin (Ig) fold domain. Based on a structural homology model for this domain and a previously identified critical residue (His292), we made Ag alpha 1p mutations in three discontinuous patches of the domain that are predicted to be in close proximity to His292 in the model. Residues in each of the three patches were identified that are important for activity and therefore define a putative ligand binding site, whereas mutations in distant loops had no effect on activity. This putative binding site is on a different surface of the Ig fold than the defined binding sites of immunoglobulins and other members of the Ig superfamily. Comparison of protein interaction sites by structural and mutational analysis has indicated that the area of surface contact is larger than the functional binding site identified by mutagenesis. The putative alpha-agglutinin binding site is therefore likely to identify residues that contribute to the functional binding site within a larger area that contacts a-agglutinin.

Structure of Saccharomyces cerevisiae alpha-agglutinin. Evidence for a yeast cell wall protein with multiple immunoglobulin-like domains with atypical disulfides

alpha-Agglutinin of Saccharomyces cerevisiae is a cell wall-associated protein that mediates cell interaction in mating. Although the mature protein includes about 610 residues, the NH2-terminal half of the protein is sufficient for binding to its ligand a-agglutinin. alpha-Agglutinin20-351, a fully active fragment of the protein, has been purified and analyzed. Circular dichroism spectroscopy, together with sequence alignments, suggest that alpha-agglutinin20-351 consists of three immunoglobulin variable-like domains: domain I, residues 20-104; domain II, residues 105-199; and domain III, residues 200-326. Peptide sequencing data established the arrangement of the disulfide bonds in alpha-agglutinin20-351. Cys97 is disulfide-bonded to Cys114, forming an interdomain bond between domains I and II. Cys202 is bonded to Cys300, in an atypical intradomain disulfide bond between the A and F strands of domain III. Cys227 and Cys256 have free sulfhydryls. Sequencing also showed that at least two of three potential N-glycosylation sites with sequence Asn-Xaa-Thr are glycosylated. At least one of three Asn-Xaa-Ser sequences is not glycosylated. No residues NH2-terminal to Ser282 were O-glycosylated, whereas Ser282, and all hydroxy amino acid residues COOH-terminal to this position were modified. Therefore O-glycosylated Ser and Thr residues cluster in the COOH-terminal region of domain III, and the O-glycosylation continues into a Ser/Thr-rich sequence that extends from domain III to the COOH-terminal of the full-length protein.

Glycosyl phosphatidylinositol-dependent cross-linking of alpha-agglutinin and beta 1,6-glucan in the Saccharomyces cerevisiae cell wall

The cell adhesion protein alpha-agglutinin is bound to the outer surface of the Saccharomyces cerevisiae cell wall and mediates cell-cell contact in mating. alpha-Agglutinin is modified by addition of a glycosyl phosphatidylinositol (GPI) anchor as it traverses the secretory pathway. The presence of a GPI anchor is essential for cross-linking into the wall, but the fatty acid and inositol components of the anchor are lost before cell wall association (Lu, C.-F., J. Kurjan, and P. N. Lipke, 1994. A pathway for cell wall anchorage of Saccharomyces cerevisiae alpha-agglutinin. Mol. Cell. Biol. 14:4825-4833). Cell wall association of alpha-agglutinin was accompanied by an increase in size and a gain in reactivity to antibodies directed against beta 1,6-glucan. Several kre mutants, which have defects in synthesis of cell wall beta 1,6-glucan, had reduced molecular size of cell wall alpha-agglutinin. These findings demonstrate that the cell wall form of alpha-agglutinin is covalently associated with beta 1,6-glucan. The alpha-agglutinin biosynthetic precursors did not react with antibody to beta 1,6-glucan, and the sizes of these forms were unaffected in kre mutants. A COOH-terminal truncated form of alpha-agglutinin, which is not GPI anchored and is secreted into the medium, did not react with the anti-beta 1,6-glucan. We propose that extracellular cross-linkage to beta 1,6-glucan mediates covalent association of alpha-agglutinin with the cell wall in a manner that is dependent on prior addition of a GPI anchor to alpha-agglutinin.

Cold-shock induction of a family of TIP1-related proteins associated with the membrane in Saccharomyces cerevisiae

TIP1 is the first known cold-shock- and heat-shock-induced gene in Saccharomyces cerevislae. Here it is demonstrated that a TIP1 homologue, TIR1, which had been previously cloned as SRP1 (serine-rich protein), is strongly induced by a downshift in growth temperature from 30 to 10 degrees C. We further cloned TIR2, which is transcribed at a low basal level but is increased strongly by cold shock and, to a lesser extent, by heat shock. The predicted protein sequence of TIR2 demonstrates remarkable homology to TIR1 (72.2%) and is also homologous with TIP1 (49%). TIP1, TIR1 and TIR2 are rich in both serine and alanine residues and each contains serine-rich tandem repeats. The proteins contain putative N-terminal signal peptides as well as hydrophobic C-terminal sequences, indicating that the proteins may be membrane bound. The predicted protein sequences are also consistent with extensive O-mannosylation as well as glycosyl-phosphatidyl inositol (GPI) membrane anchoring. Cell fractionation analysis as well as studies using a yeast strain that is conditionally deficient in glycosylation demonstrate that TIP1 is a heavily modified membrane-associated protein. Single, double combinations and triple mutants were created and none demonstrated any obvious phenotype, indicating that this family of genes is not essential for normal growth.

Candida albicans ALS1: domains related to a Saccharomyces cerevisiae sexual agglutinin separated by a repeating motif

Transfer of budding Candida albicans yeast cells from the rich, complex medium YEPD to the defined tissue culture medium RPMI 1640 (RPMI) at 37 degrees C and 5% CO2 causes rapid onset of hyphal induction. Among the genes induced under these conditions are hyphal-specific genes as well as genes expressed in response to changes in temperature, CO2 and specific media components. A cDNA library constructed from cells incubated for 20 min in RPMI was differentially screened with yeast (YEPD)- and hyphal (RPMI)-specific probes resulting in identification of a gene expressed in response to culture conditions but not regulated by the yeast-hyphal transition. The deduced gene product displays significant identity to Saccharomyces cerevisiae alpha-agglutinin, encoded by AG alpha 1, an adhesion glycoprotein that mediates mating of haploid cells. The presence of this gene in C. albicans is curious since the organism has not been observed to undergo meiosis. We designate the C. albicans gene ALS1 (for agglutinin-like sequence). While the N- and C-termini of the predicted 1260-amino-acid ALS1 protein resemble those of the 650-amino-acid AG alpha 1, ALS1 contains a central domain of tandem repeats consisting of a highly conserved 36-amino-acid sequence not present in AG alpha 1. These repeats are also present on the nucleotide level as a highly conserved 108 bp motif. Southern and Northern blot analyses indicate a family of C. albicans genes that contain the tandem repeat motif; at least one gene in addition to ALS1 is expressed under conditions similar to those for ALS1 expression. Genomic Southern blots from several C. albicans isolates indicate that the number of copies of the tandem repeat element in ALS1 differs across strains and, in some cases, between ALS1 alleles in the same strain, suggesting a strain-dependent variability in ALS1 protein size. Potential roles for the ALS1 protein are discussed.

A pathway for cell wall anchorage of Saccharomyces cerevisiae alpha-agglutinin

Saccharomyces cerevisiae alpha-agglutinin is a cell wall-anchored adhesion glycoprotein. The previously identified 140-kDa form, which contains a glycosyl-phosphatidylinositol (GPI) anchor (D. Wojciechowicz, C.-F. Lu, J. Kurjan, and P. N. Lipke, Mol. Cell. Biol. 13:2554-2563, 1993), and additional forms of 80, 150, 250 to 300, and > 300 kDa had the properties of intermediates in a transport and cell wall anchorage pathway. N glycosylation and additional modifications resulted in successive increases in size during transport. The 150- and 250- to 300-kDa forms were membrane associated and are likely to be intermediates between the 140-kDa form and a cell surface GPI-anchored form of > 300 kDa. A soluble form of > 300 kDa that lacked the GPI anchor had properties of a periplasmic intermediate between the plasma membrane form and the > 300-kDa cell wall-anchored form. These results constitute experimental support for the hypothesis that GPI anchors act to localize alpha-agglutinin to the plasma membrane and that cell wall anchorage involves release from the GPI anchor to produce a periplasmic intermediate followed by linkage to the cell wall.

A pathway for cell wall anchorage of Saccharomyces cerevisiae alpha-agglutinin

Saccharomyces cerevisiae alpha-agglutinin is a cell wall-anchored adhesion glycoprotein. The previously identified 140-kDa form, which contains a glycosyl-phosphatidylinositol (GPI) anchor (D. Wojciechowicz, C.-F. Lu, J. Kurjan, and P. N. Lipke, Mol. Cell. Biol. 13:2554-2563, 1993), and additional forms of 80, 150, 250 to 300, and > 300 kDa had the properties of intermediates in a transport and cell wall anchorage pathway. N glycosylation and additional modifications resulted in successive increases in size during transport. The 150- and 250- to 300-kDa forms were membrane associated and are likely to be intermediates between the 140-kDa form and a cell surface GPI-anchored form of > 300 kDa. A soluble form of > 300 kDa that lacked the GPI anchor had properties of a periplasmic intermediate between the plasma membrane form and the > 300-kDa cell wall-anchored form. These results constitute experimental support for the hypothesis that GPI anchors act to localize alpha-agglutinin to the plasma membrane and that cell wall anchorage involves release from the GPI anchor to produce a periplasmic intermediate followed by linkage to the cell wall.

Is there a role for GPIs in yeast cell-wall assembly?

Glycosylphosphatidylinositol (GPI) membrane anchors are essential for the integration of yeast cell adhesion proteins into the cell wall, but mature cell-wall proteins are unlikely to be attached directly to the membrane. We thus propose that GPI-anchored glycoprotein forms are intermediates in a process that crosslinks the major components of the cell wall by transglycosylation. This mechanism may be critical for both the biosynthesis and overall architecture of the cell wall.

Bleomycin affects cell wall anchorage of mannoproteins in Saccharomyces cerevisiae

Bleomycin induces strand breakage in DNA through disruption of glycosidic linkages. We investigated the ability of bleomycin to damage yeast cell walls, which are composed primarily of carbohydrate. Bleomycin treatment of intact yeast cells facilitated enzymatic conversion of yeasts to spheroplasts. Bleomycin treatment also altered anchorage of mannoproteins to the cell wall matrix in intact cells or isolated cell walls. Cell surface mannoproteins were labelled with 125I, and their solubilization was monitored. Seventeen hour treatments with bleomycin released some of the label directly into treatment supernatants and facilitated extraction of mannoproteins by dithiothreitol and lytic enzymes. Bleomycin treatments as short as 10 min caused changes in extraction of mannoproteins from intact cells. Specifically, cell wall anchorage of several mannoproteins was affected by the drug. There were drug-induced changes in extractability of mannoproteins with apparent molecular weights of 96,000, 80,000, 61,000, 41,000, 31,500, and 21,000 (determined after deglycosylation with endo-N-acetylglucosaminidase H). The similarity of results obtained in the presence and absence of cycloheximide, the appearance of cell wall effects after only 10 min of treatment, and the similarity of effects in intact cells and isolated cell walls are consistent with direct drug-induced damage and inconsistent with a mechanism dependent on expression of bleomycin-damaged genes or other intracellular mediators. The results are consistent with bleomycin-mediated increases in cell wall permeability through disruption of glycosidic cross-linking structures in the cell wall.

Cell surface anchorage and ligand-binding domains of the Saccharomyces cerevisiae cell adhesion protein alpha-agglutinin, a member of the immunoglobulin superfamily

alpha-Agglutinin is a cell adhesion glycoprotein expressed on the cell wall of Saccharomyces cerevisiae alpha cells. Binding of alpha-agglutinin to its ligand a-agglutinin, expressed by a cells, mediates cell-cell contact during mating. Analysis of truncations of the 650-amino-acid alpha-agglutinin structural gene AG alpha 1 delineated functional domains of alpha-agglutinin. Removal of the C-terminal hydrophobic sequence allowed efficient secretion of the protein and loss of cell surface attachment. This cell surface anchorage domain was necessary for linkage to a glycosyl phosphatidylinositol anchor. A construct expressing the N-terminal 350 amino acid residues retained full a-agglutinin-binding activity, localizing the binding domain to the N-terminal portion of alpha-agglutinin. A 278-residue N-terminal peptide was inactive; therefore, the binding domain includes residues between 278 and 350. The segment of alpha-agglutinin between amino acid residues 217 and 308 showed significant structural and sequence similarity to a consensus sequence for immunoglobulin superfamily variable-type domains. The similarity of the alpha-agglutinin-binding domain to mammalian cell adhesion proteins suggests that this structure is a highly conserved feature of adhesion proteins in diverse eukaryotes.

Cell surface anchorage and ligand-binding domains of the Saccharomyces cerevisiae cell adhesion protein alpha-agglutinin, a member of the immunoglobulin superfamily

alpha-Agglutinin is a cell adhesion glycoprotein expressed on the cell wall of Saccharomyces cerevisiae alpha cells. Binding of alpha-agglutinin to its ligand a-agglutinin, expressed by a cells, mediates cell-cell contact during mating. Analysis of truncations of the 650-amino-acid alpha-agglutinin structural gene AG alpha 1 delineated functional domains of alpha-agglutinin. Removal of the C-terminal hydrophobic sequence allowed efficient secretion of the protein and loss of cell surface attachment. This cell surface anchorage domain was necessary for linkage to a glycosyl phosphatidylinositol anchor. A construct expressing the N-terminal 350 amino acid residues retained full a-agglutinin-binding activity, localizing the binding domain to the N-terminal portion of alpha-agglutinin. A 278-residue N-terminal peptide was inactive; therefore, the binding domain includes residues between 278 and 350. The segment of alpha-agglutinin between amino acid residues 217 and 308 showed significant structural and sequence similarity to a consensus sequence for immunoglobulin superfamily variable-type domains. The similarity of the alpha-agglutinin-binding domain to mammalian cell adhesion proteins suggests that this structure is a highly conserved feature of adhesion proteins in diverse eukaryotes.

Targeting of a heterologous protein to the cell wall of Saccharomyces cerevisiae

The sexual adhesion protein of Saccharomyces cerevisiae MAT alpha cells, alpha-agglutinin, could not be extracted from the cell wall with hot sodium dodecyl sulfate (SDS), but became soluble after digestion of the cell wall with laminarinase. This indicates that it is intimately associated with cell wall glucan. A fusion protein was constructed consisting of the signal sequence of yeast invertase, guar alpha-galactosidase, and the C-terminal half of the alpha-agglutinin. Most of the fusion protein was incorporated in the cell wall. A small amount could be extracted with SDS, but most of it could only be extracted with laminarinase. On the other hand, cells containing a construct consisting of the signal sequence of invertase and alpha-galactosidase released most of the alpha-galactosidase into the medium and all cell wall-associated alpha-galactosidase was released by SDS. Labelling with antibodies showed that the alpha-galactosidase part of the fusion protein was exposed on the surface of the cell wall. The results demonstrate that the C-terminal half of the alpha-agglutinin contains the information needed to incorporate a protein into the cell wall.

Binding of Saccharomyces cerevisiae extracellular proteins to glucane

Interactions of Saccharomyces cerevisiae cell wall proteins with purified yeast glucane were studied. Using the beta-glucanase (BGL2 gene product) as the model cell wall protein, strong binding to glucane was demonstrated at pH lower than 7, while at pH higher than 8 the reaction did not occur. NaCl (2 M) did not influence the binding, while urea in concentrations higher than 4 M affected the interactions. It was also found that most other cell wall proteins, as well as intracellular proteins, reacted with glucane in the same way, showing that the interactions of proteins with glucane are rather nonspecific. Soluble periplasmic proteins invertase and acid phosphatase failed to react with glucane under the same conditions, indicating that these proteins have certain structural features preventing their interactions with glucane.

Sexual agglutination in budding yeasts: structure, function, and regulation of adhesion glycoproteins

The sexual agglutinins of the budding yeasts are cell adhesion proteins that promote aggregation of cells during mating. In each yeast species, complementary agglutinins are expressed by cells of opposite mating type that interact to mediate aggregation. Saccharomyces cerevisiae alpha-agglutinin and its analogs from other yeasts are single-subunit glycoproteins that contain N-linked and O-linked oligosaccharides. The N-glycosidase-sensitive carbohydrate is not necessary for activity. The proposed binding domain of alpha-agglutinin has features characteristic of the immunoglobulin fold structures of cell adhesion proteins of higher eukaryotes. The C-terminal region of alpha-agglutinin plays a role in anchoring the glycoprotein to the cell surface. The S. cerevisiae alpha-agglutinin and its analogs from other species contain multiple subunits; one or more binding subunits, which interact with the opposite agglutinin, are disulfide bonded to a core subunit, which mediates cell wall anchorage. The core subunits are composed of 80 to 95% O-linked carbohydrate. The binding subunits have less carbohydrate, and both carbohydrate and peptide play roles in binding. The alpha-agglutinin and alpha-agglutinin genes from S. cerevisiae have been cloned and shown to be regulated by the mating-type locus, MAT, and by pheromone induction. The agglutinins are necessary for mating under conditions that do not promote cell-cell contact. The role of the agglutinins therefore is to promote close interactions between cells of opposite mating type and possibly to facilitate the response to phermone, thus increasing the efficiency of mating. We speculate that they mediate enhanced response to sex pheromones by providing a synapse at the point of cell-cell contact, at which both pheromone secretion and cell fusion occur.

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.

Determinants for glycophospholipid anchoring of the Saccharomyces cerevisiae GAS1 protein to the plasma membrane

A 125-kDa glycoprotein exposed on the surface of Saccharomyces cerevisiae cells belongs to a class of eucaryotic membrane proteins anchored to the lipid bilayer by covalent linkage to an inositol-containing glycophospholipid. We have cloned the gene (GAS1) encoding the 125-kDa protein (Gas1p) and found that the function of Gas1p is not essential for cell viability. The nucleotide sequence of GAS1 predicts a 60-kDa polypeptide with a cleavable N-terminal signal sequence, potential sites for N- and O-linked glycosylation, and a C-terminal hydrophobic domain. Determination of the anchor attachment site revealed that the C-terminal hydrophobic domain of Gas1p is removed during anchor addition. However, this domain is essential for addition of the glycophospholipid anchor, since a truncated form of the protein failed to become attached to the membrane. Anchor addition was also abolished by a point mutation affecting the hydrophobic character of the C-terminal sequence. We conclude that glycophospholipid anchoring of Gas1p depends on the integrity of the C-terminal hydrophobic domain that is removed during anchor attachment.

Determinants for glycophospholipid anchoring of the Saccharomyces cerevisiae GAS1 protein to the plasma membrane

A 125-kDa glycoprotein exposed on the surface of Saccharomyces cerevisiae cells belongs to a class of eucaryotic membrane proteins anchored to the lipid bilayer by covalent linkage to an inositol-containing glycophospholipid. We have cloned the gene (GAS1) encoding the 125-kDa protein (Gas1p) and found that the function of Gas1p is not essential for cell viability. The nucleotide sequence of GAS1 predicts a 60-kDa polypeptide with a cleavable N-terminal signal sequence, potential sites for N- and O-linked glycosylation, and a C-terminal hydrophobic domain. Determination of the anchor attachment site revealed that the C-terminal hydrophobic domain of Gas1p is removed during anchor addition. However, this domain is essential for addition of the glycophospholipid anchor, since a truncated form of the protein failed to become attached to the membrane. Anchor addition was also abolished by a point mutation affecting the hydrophobic character of the C-terminal sequence. We conclude that glycophospholipid anchoring of Gas1p depends on the integrity of the C-terminal hydrophobic domain that is removed during anchor attachment.