Fluorescence properties of the Ca2+,Mg2(+)-ATPase protein of sarcoplasmic reticulum labeled with 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole

A synthetic S6 segment derived from KvAP channel self-assembles, permeabilizes lipid vesicles, and exhibits ion channel activity in bilayer lipid membrane

KvAP is a voltage-gated tetrameric K(+) channel with six transmembrane (S1-S6) segments in each monomer from the archaeon Aeropyrum pernix. The objective of the present investigation was to understand the plausible role of the S6 segment, which has been proposed to form the inner lining of the pore, in the membrane assembly and functional properties of KvAP channel. For this purpose, a 22-residue peptide, corresponding to the S6 transmembrane segment of KvAP (amino acids 218-239), and a scrambled peptide (S6-SCR) with rearrangement of only hydrophobic amino acids but without changing its composition were synthesized and characterized structurally and functionally. Although both peptides bound to the negatively charged phosphatidylcholine/phosphatidylglycerol model membrane with comparable affinity, significant differences were observed between these peptides in their localization, self-assembly, and aggregation properties onto this membrane. S6-SCR also exhibited reduced helical structures in SDS micelles and phosphatidylcholine/phosphatidylglycerol lipid vesicles as compared with the S6 peptide. Furthermore, the S6 peptide showed significant membrane-permeabilizing capability as evidenced by the release of calcein from the calcein-entrapped lipid vesicles, whereas S6-SCR showed much weaker efficacy. Interestingly, although the S6 peptide showed ion channel activity in the bilayer lipid membrane, despite having the same amino acid composition, S6-SCR was significantly inactive. The results demonstrated sequence-specific structural and functional properties of the S6 wild type peptide. The selected S6 segment is probably an important structural element that could play an important role in the membrane interaction, membrane assembly, and functional property of the KvAP channel.

Structural and functional changes in a synthetic S5 segment of KvLQT1 channel as a result of a conserved amino acid substitution that occurs in LQT1 syndrome of human

Mutations in various voltage gated cardiac ion channels are the cause of different forms of long QT syndrome (LQTS), which is an inherited arrhythmic disorder marked as a prolonged QT interval on electrocardiogram. Of these LQTS1 is associated with mutations in the gene encoding KCNQ1 (KvLQT1) channel. One responsible mutation, G269S, in the S5 segment of KvLQT1, that affects the proper expression and function of channel protein leads to LQTS1. Our objective was to study how G269S mutation interferes with the structure and function of a synthetic S5 segment of KvLQT1 channel. One wild type 22-residue peptide and another mutant peptide of the same length with G269S mutation, derived from the S5 segment were synthesized and labeled with fluorescent probes. The mutant peptide exhibited lower affinity towards phospholipid vesicles as compared to the wild type peptide and showed impaired assembly and localization onto the lipid vesicles as evidenced by membrane-binding, energy transfer and proteolytic cleavage experiments. Loss in the helical content of S5 mutant peptide in membrane-mimetic environments was observed. Furthermore, it was observed that G269S mutation significantly inhibited the ability of S5 peptide to permeabilize the lipid vesicles. The present studies show the basis of change in function of the selected S5 segment as a result of G269S mutation which is associated with LQT1 syndrome. We speculate that the structural and functional changes related to the glycine to serine amino acid substitution in the S5 segment may also influence the activity of the whole KvLQT1 channel.

Addition of a small hydrophobic segment from the head region to an amphipathic leucine zipper like motif of E. coli toxin hemolysin E enhances the peptide-induced permeability of zwitterionic lipid vesicles

To find out the sequence requirement of the H-205 peptide, containing an amphipathic leucine zipper motif corresponding to the amino acid (a.a.) region 205-234 of hemolysin E (HlyE) to induce efficient permeation in zwitterionic lipid vesicles, the peptide was extended at the N-terminal after the addition of seven amino acids from the predicted transmembrane region in the head domain of the protein-toxin. The new peptide, H-198 (a.a. 198-234) and a scrambled mutant peptide of the same size were synthesized, fluorescently labeled and characterized functionally and structurally. The results showed that H-198 induced significantly higher permeation in the zwitterionic PC/Chol lipid vesicles than its shorter version, H-205. H-198 formed large aggregates in the PC/Chol vesicles unlike H-205 and also adopted more helical structure in the membrane mimetic environments compared to that of H-205. Fluorescence energy transfer experiments by flow cytometry indicated that only H-198 but not its mutant or H-205 oligomerized in the zwitterionic lipid vesicles, while in the negatively charged lipid vesicles both H-198 and H-205 formed oligomeric assembly. The results suggest a probable role of the hydrophobic residues of the head domain of HlyE in inducing permeability in the zwitterionic lipid vesicles by the peptide derived from the a.a. 198-234 of the toxin.

Identification and Characterization of an Amphipathic Leucine Zipper-like Motif in Escherichia coli Toxin Hemolysin E

Hemolysin E (HlyE) is a 34 kDa protein toxin, recently isolated from a pathogenic strain of Escherichia coli, which is believed to exert its toxic activity via formation of pores in the target cell membrane. With the goal of understanding the involvement of different segments of hemolysin E in the membrane interaction and assembly of the toxin, a conserved, amphipathic leucine zipper-like motif has been identified. In order to evaluate the possible structural and functional roles of this segment in HlyE, a 30-residue peptide (H-205) corresponding to the leucine zipper motif (amino acid 205-234) and two mutant peptides of the same size were synthesized and labeled by fluorescent probes at their N termini. The results show that the wild-type H-205 binds to both zwitterionic (PC/Chol) and negatively charged (PC/PG/Chol) phospholipid vesicles and also self-assemble therein. Detailed membrane-binding experiments revealed that this synthetic motif (H-205) formed large aggregates and inserted into the bilayer of only negatively charged lipid vesicles but not of zwitterionic membrane. Although both the mutants bound to zwitterionic and negatively charged lipid vesicles, neither of them inserted into the lipid bilayers nor assembled in any of these lipid vesicles. Furthermore, H-205 adopted a significant helical structure in membrane mimetic environments and induced the permeation of monovalent ions and release of entrapped calcein across the phospholipid vesicles more efficiently than the mutant peptides. The results presented here indicate that this H-205 (amino acid 205-234) segment may be an important structural element in hemolysin E, which could play a significant role in the binding and assembly of the toxin in the target cell membrane and its destabilization.

Membrane-induced step in the activation of Sendai virus fusion protein

Peptides derived from conserved heptad-repeat regions of several viruses have been shown recently to inhibit virus-cell fusion. To find out their possible role in the fusion process, two biologically active heptad-repeat segments of the fusion protein (F) of Sendai virus, SV-150 (residues 150-186), and SV-473 (residues 473-495) were synthesized, fluorescently labeled and spectroscopically characterized for their structure and organization in solution and within the membrane. SV-150 was found to be 50-fold less active than SV-473 in inhibiting Sendai virus-cell fusion. Circular dichroism (CD) spectroscopy revealed that in aqueous solution, the peptides are self-associated and adopt low alpha-helical structure. However, when the two peptides are mixed together, their alpha-helical content significantly increases. Fluorescence studies, CD, and polarized attenuated total reflection infrared (ATR-FTIR) spectroscopy showed that both peptides, alone or as a complex, bind strongly to negatively charged and zwitterionic phospholipid membranes, dissociate therein into alpha-helical monomers, but do not perturb the lipid packing of the membrane. The ability of the peptides to interact with each other in solution may be correlated with antiviral activity, whereas their ability to interact with the membrane, together with their location near the fusion peptide and the transmembrane domain, suggests a revision to the currently accepted model for viral-induced membrane fusion. In the revised model, in the sequence of events associated with viral entry, the two heptad-repeat sequences may assist in bringing the viral and cellular membranes closer, thus facilitating membrane fusion.

The structure and organization of synthetic putative membranous segments of ROMK1 channel in phospholipid membranes

The hydropathy plot of ROMK1, an inwardly rectifying K+ channel, suggests that the channel contains two transmembrane domains (M1 and M2) and a linker between them with significant homology to the H5 pore region of voltage-gated K+ channels. To gain structural information on the pore region of the ROMK1 channel, we used a spectrofluorimetric approach and characterized the structure, the organization state, and the ability of the putative membranous domains of the ROMK1 channel to self-assemble and coassemble within lipid membranes. Circular dichroism (CD) spectroscopy revealed that M1 and M2 adopt high alpha-helical structures in egg phosphatidylcholine small unilamellar vesicles and 40% trifluoroethanol (TFE)/water, whereas H5 is not alpha-helical in either egg phosphatidylcholine small unilamellar vesicles or 40% TFE/water. Binding experiments with 4-fluoro-7-nitrobenz-2-oxa-1,3-diazole (NBD)-labeled peptide demonstrated that all of the peptides bind to zwitterionic phospholipid membranes with partition coefficients on the order of 10(5) M-1. Tryptophan quenching experiments using brominated phospholipids revealed that M1 is dipped into the hydrophobic core of the membrane. Resonance energy transfer (RET) measurements between fluorescently labeled pairs of donor (NBD)/acceptor (rhodamine) peptides revealed that H5 and M2 can self-associate in their membrane-bound state, but M1 cannot. Moreover, the membrane-associated nonhelical H5 serving as a donor can coassemble with the alpha-helical M2 but not with M1, and M1 can coassemble with M2. No coassembly was observed between any of the segments and a membrane-embedded alpha-helical control peptide, pardaxin. The results are discussed in terms of their relevance to the proposed topology of the ROMK1 channel, and to general aspects of molecular recognition between membrane-bound polypeptides.

Secondary structure, membrane localization, and coassembly within phospholipid membranes of synthetic segments derived from the N- and C-termini regions of the ROMK1 K+ channel

The hydropathy plot of the inwardly rectifying ROMK1 K+ channel, which reveals two transmembrane and a pore region domains, also reveals areas of intermediate hydrophobicity in the N terminus (M0) and in the C terminus (post-M2). Peptides that correspond to M0, post-M2, and a control peptide, pre-M0, were synthesized and characterized for their structure, affinity to phospholipid membranes, organizational state in membranes, and ability to self-assemble and coassemble in the membrane-bound state. CD spectroscopy revealed that both M0 and post-M2 adopt highly alpha-helical structures in 1% SDS and 40% TFE/water, whereas pre-M0 is not alpha-helical in either 1% SDS or 40% TFE/water. Binding experiments with NBD-labeled peptides demonstrated that both M0 and post-M2, but not pre-M0, bind to zwitterionic phospholipid membranes with partition coefficients of 10(3)-10(5) M-1. A surface localization for both post-M2 and M0 was indicated by NBD shift, tryptophan quenching experiments with brominated phospholipids, and enzymatic cleavage. Resonance energy transfer measurements between fluorescently labeled pairs of donor (NBD)/ acceptor (rhodamine) peptides revealed that M0 and post-M2 can coassemble in their membrane-bound state, but cannot self-associate when membrane-bound. The results are in agreement with recent data indicating that amino acids in the carboxy terminus of inwardly rectifying K+ channels have a major role in specifying the pore properties of the channels (Taglialatela M, Wible BA, Caporaso R, Brown AM, 1994 Science 264:844-847; Pessia M, Bond CT, Kavanaugh MP, Adelman JP, 1995, Neuron 14:1039-1045). The relevance of the results presented herein to the suggested model for the structure of the ROMK1 channel and to general aspects of molecular recognition between membrane-bound polypeptides are also discussed.

Reaction of 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole with the (Ca2+ + Mg2+)- ATPase protein of sarcoplasmic reticulum at low temperature

Modification of the (Ca2+ + Mg2+)-ATPase protein of rabbit skeletal sarcoplasmic reticulum (SR) with 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole, NBD-Cl, at 4 degrees C for 5 min caused a 63% loss of the Ca(2+)-dependent ATPase activity when 1 mol of the adenine analog was incorporated per 10(5) g of protein. At 25 degrees C, above the lipid phase transition, the extent of labeling was 3-fold higher although the Ca(2+)-ATPase activity was inhibited to the same extent. MgATP protected the ATPase activity at 4 degrees C and 25 degrees C but there was little change in the extent of labeling at 4 degrees C suggesting that changes in the fluidity of the lipid moiety made different sites on the ATPase protein accessible to the reagent. At 4 degrees C, addition of sodium deoxycholate enhanced the inactivation (6% ATPase activity remained) but the labeling of the SR-ATPase protein did not increase significantly. Incubation with MgATP prior to solubilization with deoxycholate resulted in the protection of the Ca(2+)-ATPase activity and only a small decrease in the labeling occurred. At 25 degrees C, a similar pattern was found with deoxycholate but the loss of ATPase activity was less dramatic and the extent of labeling by NBD-Cl was greater than that at 4 degrees C. MgATP induced changes in the conformation of the ATPase protein protecting essential cysteine residues while shifting the reaction of NBD-Cl with the ATPase protein to non-essential sites in the absence or presence of deoxycholate. An analysis of tryptic digests of the NBD-ATPase protein showed that MgATP shifted the labeling from the A2 subfragment to the A1 subfragment in the absence of deoxycholate and from the A1 subfragment to the A2 subfragment in the presence of deoxycholate. The reagent, NBD-Cl, can distinguish between different temperature dependent conformational states of the ATPase protein.

Pardaxin: channel formation by a shark repellant peptide from fish

The results of the various studies describing the mechanism involved in pore formation by pardaxin and some of its analogues, support a 'barrel-stave' model (Ehrenstein amd Lecar, 1977). In this model pardaxin exerts its activity via three successive steps: (i) a fast binding step (as reflected by the rapid increase of NBD fluorescence in the presence of vesicles); (ii) insertion of peptides into the lipid bilayer; and (iii) the monomers aggregate into a barrel-like formation in which a central aqueous pore surrounded by proteins is formed. This pore increases in diameter through the progressive recruitment of additional monomers. Both the fluorescence energy transfer (FET) studies and the observation of a significant difference in the increase of NBD fluorescence, depending on which terminal was labelled by the fluorophore, support a model by which aggregates are formed in an ordered parallel manner, where the C-terminus is more exposed to the aqueous phase.

Spectroscopic and functional characterization of the putative transmembrane segment of the minK potassium channel

MinK (Isk) is a voltage-dependent K+ channel whose gene has been recently cloned and which consists of 130 amino acids [Takumi, T., Ohkubo, H., & Nakanishi, S. (1988) Science 242, 1042-1045]. The protein contains one putative transmembrane segment by hydropathy analysis. Whether this putative transmembrane segment is involved in the function of the protein was studied. A 32 amino acid peptide (residues 41-72) with the sequence SKLEALYILMVLGFFGFFTLGIMLSYIRSKKL, containing the hypothesized transmembrane domain, designed TM-minK, was synthesized and fluorescently labeled. The alpha-helical content of TM-minK, assessed in methanol using circular dichroism (CD), was 57%. The fluorescent emission spectrum of 7-nitrobenz-2-oxa-1,3-diazol-4-yl (NBD)-labeled TM-minK displayed a blue shift upon binding to small unilamellar vesicles (SUV), reflecting a relocation of the fluorescent probe to an environment of increased apolarity, i.e., within the lipid bilayer. The increase in NBD's fluorescence upon mixing NBD-labeled TM-minK with small unilamellar vesicles (SUV) was used to generate a binding isotherm, from which was derived a surface partition coefficient of 5.5 x 10(4) M-1. Fluorescence energy transfer measurements between carboxyfluoresceine-labeled and rhodamine-labeled analogues suggest that TM-minK aggregates within membranes. In addition, single-channel experiments revealed that TM-minK can form single channels in planar lipid membranes only when a trans negative potential is applied. The findings herein experimentally support a role of the transmembrane segment of minK both in the assembly and as a constituent of the pore formed by the protein.