Covalent anchoring of proteins onto gold-directed NHS-terminated self-assembled monolayers in aqueous buffers: SFM images of clathrin cages and triskelia

Imaging of nucleic acids with atomic force microscopy

Atomic force microscopy (AFM) is a key tool of nanotechnology with great importance in applications to DNA nanotechnology and to the recently emerging field of RNA nanotechnology. Advances in the methodology of AFM now enable reliable and reproducible imaging of DNA of various structures, topologies, and DNA and RNA nanostructures. These advances are reviewed here with emphasis on methods utilizing modification of mica to prepare the surfaces enabling reliable and reproducible imaging of DNA and RNA nanostructures. Since the AFM technology for DNA is more mature, AFM imaging of DNA is introduced in this review to provide experience and background for the improvement of AFM imaging of RNA. Examples of imaging different structures of RNA and DNA are discussed and illustrated. Special attention is given to the potential use of AFM to image the dynamics of nucleic acids at the nanometer scale. As such, we review recent advances with the use of time-lapse AFM.

Semiquantitative study of the EDC/NHS activation of acid terminal groups at modified porous silicon surfaces

Infrared spectroscopy is used to investigate the transformation of carboxyl-terminated alkyl chains immobilized on a surface into succinimidyl ester-terminated chains by reaction with an aqueous solution of N-ethyl-N'-(3-(dimethylamino)propyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The acid chains are covalently grafted at the surface of hydrogenated porous silicon whose large specific surface area allows for assessing the activation yield in a semiquantitative way by infrared (IR) spectroscopy and detecting trace amounts of surface products and/or reaction products of small IR cross section. In this way, we rationalize the different reaction paths and optimize the reaction conditions to obtain as pure as possible succinimidyl ester-terminated surfaces. A diagram mapping the surface composition after activation was constructed by systematically varying the solution composition. Results are accounted for by NHS surface adsorption and a kinetic competition between the various EDC-induced surface reactions.

AFM of biological complexes: what can we learn?

The term "biological complexes" broadly encompasses particles as diverse as multisubunit enzymes, viral capsids, transport cages, molecular nets, ribosomes, nucleosomes, biological membrane components and amyloids. The complexes represent a broad range of stability and composition. Atomic force microscopy offers a wealth of structural and functional data about such assemblies. For this review, we choose to comment on the significance of AFM to study various aspects of biology of selected nonmembrane protein assemblies. Such particles are large enough to reveal many structural details under the AFM probe. Importantly, the specific advantages of the method allow for gathering dynamic information about their formation, stability or allosteric structural changes critical for their function. Some of them have already found their way to nanomedical or nanotechnological applications. Here we present examples of studies where the AFM provided pioneering information about the biology of complexes, and examples of studies where the simplicity of the method is used toward the development of potential diagnostic applications.

Functionalized self-assembled monolayers on ultraflat gold as platforms for single molecule force spectroscopy and imaging

Single molecule force spectroscopy is a valuable tool for studying unfolding and nanomechanical properties of proteins. The common practice is to stretch proteins from a surface that was dosed to give a reasonable hit rate and to analyze the curves that exhibit the expected characteristics of a single polymer. Whether the surface-bound proteins are indeed single and isolated remains unclear, and the undesirable protein/surface interactions that obscure informative features of the force curves are implicitly assumed to be absent. In this study, mixed self-assembled monolayers (SAMs) consisting of N-hydroxysuccinimide (NHS) and oligoethylene glycol (OEG) terminated thiols on an ultraflat gold surface were used to covalently immobilize proteins via lysine residues. By the optimization of attachment sites via lysine-NHS linkages amidst a protein-resistant layer of the OEG SAM, it was possible to isolate single proteins for study in a controlled fashion. The single protein distribution on the surface is clearly demonstrated by atomic force microscopy (AFM) imaging. The OEG also significantly reduces nonspecific tip-surface interactions between the cantilever and surface. Stretching covalently attached single proteins produces high-quality and reproducible force-extension curves. This experimental strategy is an attractive platform with which to study protein structure, interactions, and nanomechanical properties of single proteins.

Simultaneous removal of thiolated membrane proteins resulting in nanostructured lipid layers

Self-organization of membrane-embedded peptides and proteins causes the formation of lipid mesostructures in the membranes. One example is purple membranes (PM), which consist of lipids and bacteriorhodopsin (BR) as the only protein component. The BRs form a hexagonal crystalline lattice. A complementary structure is formed by the lipids. Employing BR and PM as an example, we report a method where major parts of the mesoscopic self-assembled protein structures can be extracted from the lipid bilayer membrane. A complementary lipid nanostructure remains on the substrate. To remove such a large number of thiolated proteins simultaneously by applying a mechanical force, they are first reacted at physiological conditions with gold nanoparticles, and then a thin gold film is sputtered onto them that fuses with the gold nanoparticles forming a uniform layer, which finally can be lifted off. In this step, all of the previously gold-labeled proteins are pulled out of the membrane simultaneously. A stable lipid nanostructure is obtained on the mica substrate. Its stability is due to either binding of the lipids to the substrate through ionic bonds or to enough residual proteins to stabilize the lipid nanostructure against reorganization. This method may be applied easily and efficiently wherever thiolated proteins or peptides are employed as self-assembling and structure-inducing units in lipid membranes.

Characterizing folding, structure, molecular interactions and ligand gated activation of single sodium/proton antiporters

Using the example of sodium/proton antiporter from Escherichia coli NhaA, we review the capabilities of single-molecule atomic force microscopy and force spectroscopy to observe structural and functional insights of a membrane protein, which are not attainable by other traditional methods. While atomic force microscopy provides high-resolution topographs of single membrane proteins, their oligomeric state and assembly, single-molecule force spectroscopy experiments detect molecular interactions of the protein. The sensitivity of this method makes it possible to detect and locate interactions that stabilize secondary structures such as transmembrane alpha-helices, polypeptide loops and segments within them. Controlled refolding experiments using single-molecule force spectroscopy observed individual secondary structure segments folding into the functional protein. Various folding pathways of NhaA were detected, each one exhibiting a certain probability to be taken. Time-lapse refolding experiments enabled determining the folding kinetics and hierarchy of individual secondary structural elements. Recent examples detected and located the ligand binding of an antiporter. Similarly, inhibitor binding and location can be detected which in future may guide towards comparative studies of agonist and antagonist altering the functional state of a membrane protein. We review current and future potentials of these approaches to characterize the action of pharmacological molecules on the antiporter function.

Micromechanical mass sensors for biomolecular detection in a physiological environment

Micromechanical cantilever arrays are used to measure time-resolved adsorption of tiny masses based on protein-ligand interactions. Here, streptavidin-biotin interactions are investigated in a physiological environment. A measurement method is introduced using higher flexural modes of a silicon cantilever in order to enhance the sensitivity of mass detection. Modeling the cantilever vibration in liquid allows the measurement of absolute mass changes. We show time-resolved mass adsorption of final 7+/-0.7 ng biotinylated latex beads. The sensitivity obtained is about 2.5 pg/Hz measuring at a center frequency of 750 kHz.

Engineering Surfaces for Bioconjugation: Developing Strategies and Quantifying the Extent of the Reactions

This study presents two-step and multistep reactions for modifying the surface of plasma-functionalized poly(tetrafluoroethylene) (PTFE) surfaces for subsequent conjugation of biologically relevant molecules. First, PTFE films were treated by a radiofrequency glow discharge (RFGD) ammonia plasma to introduce amino groups on the fluoropolymer surface. This plasma treatment is well optimized and allows the incorporation of a relative surface concentration of approximately 2-3.5% of amino groups, as assessed by chemical derivatization followed by X-ray photoelectron spectroscopy (XPS). In a second step, these amino groups were further reacted with various chemical reagents to provide the surface with chemical functionalities such as maleimides, carboxylic acids, acetals, aldehydes, and thiols, that could be used later on to conjugate a wide variety of biologically relevant molecules such as proteins, DNA, drugs, etc. In the present study, glutaric and cis-aconitic anhydrides were evaluated for their capability to provide carboxylic functions to the PTFE plasma-treated surface. Bromoacetaldehyde diethylacetal was reacted with the aminated PTFE surface, providing a diethylacetal function, which is a latent form of aldehyde functionality. Reactions with cross-linkers such as sulfo-succinimidyl derivatives (sulfo-SMCC, sulfo-SMPB) were evaluated to provide a highly reactive maleimide function suitable for further chemical reactions with thiolated molecules. Traut reagent (2-iminothiolane) was also conjugated to introduce a thiol group onto the fluoropolymer surface. PTFE-modified surfaces were analyzed by XPS with a particular attention to quantify the extent of the reactions that occurred on the polymer. Finally, surface immobilization of fibronectin performed using either glutaric anhydride or sulfo-SMPB activators demonstrated the importance of selecting the appropriate conjugation strategy to retain the protein biological activity.

Development of an electrochemical immunosensor for direct detection of interferon-gamma at the attomolar level

An electrochemical immunosensor for direct detection of the 15.5-kDa protein interferon-gamma (IFN-gamma) at attomolar level has been developed. Self-assembled monolayers (SAMs) of cysteine or acetylcysteine are formed on electropolished polycrystalline Au electrodes. IFN-gamma adsorbs physically to each of these SAMs. With injections of 100 mM KCl, IFN-gamma can be removed in the flow without damaging the acetylcysteine SAM. However, the cysteine SAM is affected by these KCl injections. In an on-line procedure in the flow, a specific antibody (MD-2) against IFN-gamma is covalently attached following carbodiimide/succinimide activation of the SAM. The activation of the carboxylic groups, attachment of MD-2, and deactivation of the remaining succinimide groups with ethanolamine are monitored impedimetrically at a frequency of 113 Hz, a potential of +0.2 V versus SCE, and an ac modulation amplitude of 10 mV. Plots of the real (Z') and imaginary (Z") component of the impedance versus time provide the information to control these processes. In the thermostated setup (23.0 degrees C), samples of unlabeled IFN-gamma (in phosphate buffer pH 7.4) are injected and the binding with immobilized MD-2 is monitored with ac impedance or potential-step methods. While the chronoamperometric results are rather poor, the ac impedance approach provides unsurpassed detection limits, as low as 0.02 fg mL-1 (approximately 1 aM) IFN-gamma. From a calibration curve (i.e. Z" versus the amount injected), recorded by multiple 50-microL injections of 2 pg mL(-1) of IFN-gamma, a dynamic range of 0-12 pg mL(-1) could be derived. However, when nonspecific adsorption is taken into account, which has been found to be largely reduced through injections of 100 mM KCl, a much smaller dynamic range of 0-0.14 fg mL(-1) remains. The immunosensor can be regenerated by using a sequence of potential pulses in the flow by which the SAM with attached MD-2 and bound IFN-gamma is completely removed. When the developed procedures described above are repeated, the response of the immunosensor is reproducible within 10%.

AFM study of membrane proteins, cytochrome P450 2B4, and NADPH-cytochrome P450 reductase and their complex formation

The application of the AFM technique for visualization of membrane proteins and for measuring their dimensions was demonstrated. The AFM images of the microsomal monooxygenase system components-cytochrome P450 2B4 and NADPH-cytochrome P450 reductase-were obtained by using two types of supports-hydrophobic, highly oriented pyrolytic graphite (HOPG) and hydrophilic mica. It was shown that hemo- and flavoprotein monomers and oligomers can be adsorbed to and visualized on HOPG. On the negatively charged mica matrix, flavoprotein oligomers dissociated to monomers while hemoprotein oligomers dissociated into less aggregated particles. The images of cytochrome P450 2B4 and NADPH-cytochrome P450 reductase monomers were about 3 and 5 nm high, respectively, while the images of oligomeric forms of these proteins were about 10 and 8 nm high, respectively. We were able to observe the binary complexes composed of monomeric proteins, cytochrome P450 2B4 and its reductase and to measure the heights of these complexes (7 nm). The method is applicable for visualization of not only individual proteins but also their complexes.

Oriented, active Escherichia coli RNA polymerase: an atomic force microscope study

Combining a system for binding proteins to surfaces (Sigal, G. B., C. Bamdad, A. Barberis, J. Strominger, and G. M. Whitesides. 1996. Anal. Chem. 68:490-497) with a method for making ultraflat gold surfaces (Hegner, M., P. Wagner, and G. Semenza. 1993. Surface Sci. 291:39-46 1993) has enabled single, oriented, active Escherichia coli RNA polymerase (RNAP) molecules to be imaged under aqueous buffer using tapping-mode atomic force microscopy (AFM). Recombinant RNAP molecules containing histidine tags (hisRNAP) on the C-terminus were specifically immobilized on ultraflat gold via a mixed monolayer of two different omega-functionalized alkanethiols. One alkanethiol was terminated in an ethylene-glycol (EG) group, which resists protein adsorption, and the other was terminated in an N-nitrilotriacetic acid (NTA) group, which binds the histidine tag through two coordination sites with a nickel ion. AFM images showed that these two alkanethiols phase-segregate. Specific binding of the hisRNAP molecules was followed in situ by injecting proteins directly into the AFM fluid cell. The activity of the hisRNAP bound to the NTA groups was confirmed with a 42-base circular single-stranded DNA template (rolling circle), which the RNAP uses to produce huge RNA transcripts. These transcripts were imaged in air after the samples were rinsed and dried, since RNA also has low affinity for the EG-thiol and cannot be imaged under the buffers we used.

Antigen binding forces of individually addressed single-chain Fv antibody molecules

Antibody single-chain Fv fragment (scFv) molecules that are specific for fluorescein have been engineered with a C-terminal cysteine for a directed immobilization on a flat gold surface. Individual scFv molecules can be identified by atomic force microscopy. For selected molecules the antigen binding forces are then determined by using a tip modified with covalently immobilized antigen. An scFv mutant of 12% lower free energy for ligand binding exhibits a statistically significant 20% lower binding force. This strategy of covalent immobilization and measuring well separated single molecules allows the characterization of ligand binding forces in molecular repertoires at the single molecule level and will provide a deeper insight into biorecognition processes.

Immobilization strategies for biological scanning probe microscopy

Biological atomic force microscopy (AFM) is now established as a method for studying the structure and function of biomolecular objects at the solid-liquid interface. Major progress in this field is linked to new developments in instrumentation, a better understanding of tip-sample interactions, and improved sample preparation techniques. In this review, the most common strategies for biomolecular immobilization with respect to biological AFM applications are summarized.

Microminiaturized immunoassays using atomic force microscopy and compositionally patterned antigen arrays

This paper combines the topographic imaging capability of the atomic force microscope (AFM) with a compositionally patterned array of immobilized antigenic rabbit IgG on gold as an approach to performing immunoassays. The substrates are composed of micrometer-sized domains of IgG that are covalently linked to a photolithographically patterned array of a monolayer-based coupling agent. The immobilized coupling agent, which is prepared by the chemisorption of dithiobis(succinimidyl undecanoate) on gold, is separated by micrometer-sized grids of a monolayer formed from octadecanethiol (ODT). The strong hydrophobicity of the ODT adlayer, combined with the addition of the surfactant Tween 80 to the buffer solution that is used in forming the antibody-antigen pairs, minimizes the nonspecific adsorption of proteinaceous materials to the grid regions. This minimization allows the grids to function as a reference plane for the AFM detection of the height increase when a complementary antibody-antigen pair is formed. The advantageous features of this strategy, which include ease of sample preparation, an internal reference plane for the detection of topographic changes, and the potential for regeneration and reuse, are demonstrated using rabbit IgG as an immobilized antigen and goat anti-rabbit IgG as the complementary antibody. The prospects for further miniaturization are discussed.

Adsorption of biological molecules to a solid support for scanning probe microscopy

Scanning probe microscopes are now established tools to study the surface structure of biological macromolecules under physiological conditions. Sample preparation methods for this microscopy all have the objective to attach the specimen firmly to a support. Here we analyse the commonly used method of adsorbing biological specimens to freshly cleaved mica. This is facilitated by adjusting the electrolyte concentration and the pH of the buffer solution. Native macromolecular systems absorbed to mica in this way can be reproducibly imaged at submolecular resolution.

Bioreactive self-assembled monolayers on hydrogen-passivated Si(111) as a new class of atomically flat substrates for biological scanning probe microscopy

This is the first report of bioreactive self-assembled monolayers, covalently bound to atomically flat silicon surfaces and capable of binding biomolecules for investigation by scanning probe microscopy and other surface-related assays and sensing devices. These monolayers are stable under a wide range of conditions and allow tailor-made functionalization for many purposes. We describe the substrate preparation and present an STM and SFM characterization, partly performed with multiwalled carbon nanotubes as tapping-mode supertips. Furthermore, we present two strategies of introducing in situ reactive headgroup functionalities. One method entails a free radical chlorosulfonation process with subsequent sulfonamide formation. A second method employs singlet carbenemediated hydrogen-carbon insertion of a heterobifunctional, amino-reactive trifluoromethyl-diazirinyl crosslinker. We believe that this new substrate is advantageous to others, because it (i) is atomically flat over large areas and can be prepared in a few hours with standard equipment, (ii) is stable under most conditions, (iii) can be modified to adjust a certain degree of reactivity and hydrophobicity, which allows physical adsorption or covalent crosslinking of the biological specimen, (iv) builds the bridge between semiconductor microfabrication and organic/biological molecular systems, and (v) is accessible to nanopatterning and applications requiring conductive substrates.

Specific antigen/antibody interactions measured by force microscopy

Molecular recognition between biotinylated bovine serum albumin and polyclonal, biotin-directed IG antibodies has been measured directly under various buffer conditions using an atomic force microscope (AFM). It was found that even highly structured molecules such as IgG antibodies preserve their specific affinity to their antigens when probed with an AFM in the force mode. We could measure the rupture force between individual antibody-antigen complexes. The potential and limitations of this new approach for the measurement of individual antigen/antibody interactions and some possible applications are discussed.

Covalent immobilization of native biomolecules onto Au(111) via N-hydroxysuccinimide ester functionalized self-assembled monolayers for scanning probe microscopy

We have worked out a procedure for covalent binding of native biomacromolecules on flat gold surfaces for scanning probe microscopy in aqueous buffer solutions and for other nanotechnological applications, such as the direct measurement of interaction forces between immobilized macromolecules, of their elastomechanical properties, etc. It is based on the covalent immobilization of amino group-containing biomolecules (e.g., proteins, phospholipids) onto atomically flat gold surfaces via omega-functionalized self-assembled monolayers. We present the synthesis of the parent compound, dithio-bis(succinimidylundecanoate) (DSU), and a detailed study of the chemical and physical properties of the monolayer it forms spontaneously on Au(111). Scanning tunneling microscopy and atomic force microscopy (AFM) revealed a monolayer arrangement with the well-known depressions that are known to stem from an etch process during the self-assembly. The total density of the omega-N-hydroxysuccinimidyl groups on atomically flat gold was 585 pmol/cm(2), as determined by chemisorption of (14)C-labeled DSU. This corresponded to approximately 75% of the maximum density of the omega-unsubstituted alkanethiol. Measurements of the kinetics of monolayer formation showed a very fast initial phase, with total coverage within 30 S. A subsequent slower rearrangement of the chemisorbed molecules, as indicated by AFM, led to a decrease in the number of monolayer depressions in approximately 60 min. The rate of hydrolysis of the omega-N-hydroxysuccinimide groups at the monolayer/water interface was found to be very slow, even at moderately alkaline pH values. Furthermore, the binding of low-molecular-weight amines and of a model protein was investigated in detail.

Cytoplasmic topography of focal contacts

To investigate the structure of focal contacts, the cytoplasmic faces of fibroblast membranes were examined in solution by scanning force and immunofluorescence microscopy. Focal contacts were identified in scanning force topographs by correlation with fluorescence images. Finer details were resolved in topographs of the focal contacts than in fluorescence micrographs. Increased separation of ventral plasma membranes from the substrate correlated with the duration of cell culture. The cytoplasmic projections of the focal contacts also increased with the cell culture period. These changes accompanied lateral spreading of fibroblasts during a period of several hours after seeding cells in culture medium.