Refinement of the structure of carp muscle calcium-binding parvalbumin by model building and difference Fourier analysis

An AI-informed NMR structure reveals an extraordinary LETM1 F-EF-hand domain that functions as a two-way regulator of mitochondrial calcium

AlphaFold can accurately predict static protein structures but does not account for solvent conditions. Human leucine zipper EF-hand transmembrane protein-1 (LETM1) has one sequence-identifiable EF-hand but how calcium (Ca2+) affects structure and function remains enigmatic. Here, we used highly confident AlphaFold Cα predictions to guide nuclear Overhauser effect (NOE) assignments and structure calculation of the LETM1 EF-hand in the presence of Ca2+. The resultant NMR structure exposes pairing between a partial loop-helix and full helix-loop-helix, forming an unprecedented F-EF-hand with non-canonical Ca2+ coordination but enhanced hydrophobicity for protein interactions compared to calmodulin. The structure also reveals the basis for pH sensing at the link between canonical and partial EF-hands. Functionally, mutations that augmented or weakened Ca2+ binding increased or decreased matrix Ca2+, respectively, establishing F-EF as a two-way mitochondrial Ca2+ regulator. Thus, we show how to synergize AI prediction with NMR data, elucidating a solution-specific and extraordinary LETM1 F-EF-hand.

Accounting for nonuniformity of bulk-solvent: A mosaic model

A flat mask-based model is almost universally used in macromolecular crystallography to account for disordered (bulk) solvent. This model assumes any voxel of the crystal unit cell that is not occupied by the atomic model is occupied by the solvent. The properties of this solvent are assumed to be exactly the same across the whole volume of the unit cell. While this is a reasonable approximation in practice, there are a number of scenarios where this model becomes suboptimal. In this work, we enumerate several of these scenarios and describe a new generalized approach to modeling the bulk-solvent which we refer to as mosaic bulk-solvent model. The mosaic bulk-solvent model allows nonuniform features of the solvent in the crystal to be accounted for in a computationally efficient way. It is implemented in the computational crystallography toolbox and the Phenix software.

Universal parameters of bulk-solvent masks

The bulk solvent is a major component of biomacromolecular crystals that contributes significantly to the observed diffraction intensities. Accurate modelling of the bulk solvent has been recognized as important for many crystallographic calculations. Owing to its simplicity and modelling power, the flat (mask-based) bulk-solvent model is used by most modern crystallographic software packages to account for disordered solvent. In this model, the bulk-solvent contribution is defined by a binary mask and a scale (scattering) function. The mask is calculated on a regular grid using the atomic model coordinates and their chemical types. The grid step and two radii, solvent and shrinkage, are the three parameters that govern the mask calculation. They are highly correlated and their choice is a compromise between the computer time needed to calculate the mask and the accuracy of the mask. It is demonstrated here that this choice can be optimized using a unique value of 0.6 Å for the grid step irrespective of the data resolution, and the radii values adjusted correspondingly. The improved values were tested on a large sample of Protein Data Bank entries derived from X-ray diffraction data and are now used in the computational crystallography toolbox (CCTBX) and in Phenix as the default choice.

Efficient structure-factor modeling for crystals with multiple components

Diffraction intensities from a crystallographic experiment include contributions from the entire unit cell of the crystal: the macromolecule, the solvent around it and eventually other compounds. These contributions cannot typically be well described by an atomic model alone, i.e. using point scatterers. Indeed, entities such as disordered (bulk) solvent, semi-ordered solvent (e.g. lipid belts in membrane proteins, ligands, ion channels) and disordered polymer loops require other types of modeling than a collection of individual atoms. This results in the model structure factors containing multiple contributions. Most macromolecular applications assume two-component structure factors: one component arising from the atomic model and the second one describing the bulk solvent. A more accurate and detailed modeling of the disordered regions of the crystal will naturally require more than two components in the structure factors, which presents algorithmic and computational challenges. Here an efficient solution of this problem is proposed. All algorithms described in this work have been implemented in the computational crystallography toolbox (CCTBX) and are also available within Phenix software. These algorithms are rather general and do not use any assumptions about molecule type or size nor about those of its components.

Binding and Functional Folding (BFF): A Physiological Framework for Studying Biomolecular Interactions and Allostery

EF-hand Ca2+-binding proteins (CBPs), such as S100 proteins (S100s) and calmodulin (CaM), are signaling proteins that undergo conformational changes upon increasing intracellular Ca2+. Upon binding Ca2+, S100 proteins and CaM interact with protein targets and induce important biological responses. The Ca2+-binding affinity of CaM and most S100s in the absence of target is weak (CaKD > 1 μM). However, upon effector protein binding, the Ca2+ affinity of these proteins increases via heterotropic allostery (CaKD < 1 μM). Because of the high number and micromolar concentrations of EF-hand CBPs in a cell, at any given time, allostery is required physiologically, allowing for (i) proper Ca2+ homeostasis and (ii) strict maintenance of Ca2+-signaling within a narrow dynamic range of free Ca2+ ion concentrations, [Ca2+]free. In this review, mechanisms of allostery are coalesced into an empirical "binding and functional folding (BFF)" physiological framework. At the molecular level, folding (F), binding and folding (BF), and BFF events include all atoms in the biomolecular complex under study. The BFF framework is introduced with two straightforward BFF types for proteins (type 1, concerted; type 2, stepwise) and considers how homologous and nonhomologous amino acid residues of CBPs and their effector protein(s) evolved to provide allosteric tightening of Ca2+ and simultaneously determine how specific and relatively promiscuous CBP-target complexes form as both are needed for proper cellular function.

Multifunctional Role of S100 Protein Family in the Immune System: An Update

S100 is a broad subfamily of low-molecular weight calcium-binding proteins (9–14 kDa) with structural similarity and functional discrepancy. It is required for inflammation and cellular homeostasis, and can work extracellularly, intracellularly, or both. S100 members participate in a variety of activities in a healthy cell, including calcium storage and transport (calcium homeostasis). S100 isoforms that have previously been shown to play important roles in the immune system as alarmins (DAMPs), antimicrobial peptides, pro-inflammation stimulators, chemo-attractants, and metal scavengers during an innate immune response. Currently, during the pandemic, it was found that several members of the S100 family are implicated in the pathophysiology of COVID-19. Further, S100 family protein members were proposed to be used as a prognostic marker for COVID-19 infection identification using a nasal swab. In the present review, we compiled the vast majority of recent studies that focused on the multifunctionality of S100 proteins in the complex immune system and its associated activities. Furthermore, we shed light on the numerous molecular approaches and signaling cascades regulated by S100 proteins during immune response. In addition, we discussed the involvement of S100 protein members in abnormal defense systems during the pathogenesis of COVID-19.

Ten things I `hate' about refinement

Macromolecular refinement is an optimization process that aims to produce the most likely macromolecular structural model in the light of experimental data. As such, macromolecular refinement is one of the most complex optimization problems in wide use. Macromolecular refinement programs have to deal with the complex relationship between the parameters of the atomic model and the experimental data, as well as a large number of types of prior knowledge about chemical structure. This paper draws attention to areas of unfinished business in the field of macromolecular refinement. In it, we describe ten refinement topics that we think deserve attention and discuss directions leading to macromolecular refinement software that would make the best use of modern computer resources to meet the needs of structural biologists of the twenty-first century.

New perspectives in macromolecular powder diffraction using single-photon-counting strip detectors: high-resolution structure of the pharmaceutical peptide octreotide

Advances in instrumentation, as well as the development of powerful crystallographic software have significantly facilitated the collection of high-resolution diffraction data and have made X-ray powder diffraction (XRPD) particularly useful for the extraction of structural information; this is true even for complex molecules, especially when combined with synchrotron radiation. In this study, in-line with past instrumental profile studies, an improved data collection strategy exploiting the MYTHEN II detector system together with significant beam focusing and tailored data collection options was introduced and optimized for protein samples at the Material Science beamline at the Swiss Light Source. Polycrystalline precipitates of octreotide, a somatostatin analog of particular pharmaceutical interest, were examined with this novel approach. XRPD experiments resulted in high angular and d-spacing (1.87 Å) resolution data, from which electron-density maps of enhanced quality were extracted, revealing the molecule's structural properties. Since microcrystalline precipitates represent a viable alternative for administration of therapeutic macromolecules, XRPD has been acknowledged as the most applicable tool for examining a wide spectrum of physicochemical properties of such materials and performing studies ranging from phase identification to complete structural characterization.

Experimental Insight into the Structural and Functional Roles of the 'Black' and 'Gray' Clusters in Recoverin, a Calcium Binding Protein with Four EF-Hand Motifs

Recently, we have found that calcium binding proteins of the EF-hand superfamily (i.e., a large family of proteins containing helix-loop-helix calcium binding motif or EF-hand) contain two types of conserved clusters called cluster I ('black' cluster) and cluster II ('grey' cluster), which provide a supporting scaffold for the Ca2+ binding loops and contribute to the hydrophobic core of the EF-hand domains. Cluster I is more conservative and mostly incorporates aromatic amino acids, whereas cluster II includes a mix of aromatic, hydrophobic, and polar amino acids of different sizes. Recoverin is EF-hand Ca2+-binding protein containing two 'black' clusters comprised of F35, F83, Y86 (N-terminal domain) and F106, E169, F172 (C-terminal domain) as well as two 'gray' clusters comprised of F70, Q46, F49 (N-terminal domain) and W156, K119, V122 (C-terminal domain). To understand a role of these residues in structure and function of human recoverin, we sequentially substituted them for alanine and studied the resulting mutants by a set of biophysical methods. Under metal-free conditions, the 'black' clusters mutants (except for F35A and E169A) were characterized by an increase in the α-helical content, whereas the 'gray' cluster mutants (except for K119A) exhibited the opposite behavior. By contrast, in Ca2+-loaded mutants the α-helical content was always elevated. In the absence of calcium, the substitutions only slightly affected multimerization of recoverin regardless of their localization (except for K119A). Meanwhile, in the presence of calcium mutations in N-terminal domain of the protein significantly suppressed this process, indicating that surface properties of Ca2+-bound recoverin are highly affected by N-terminal cluster residues. The substitutions in C-terminal clusters generally reduced thermal stability of recoverin with F172A ('black' cluster) as well as W156A and K119A ('gray' cluster) being the most efficacious in this respect. In contrast, the mutations in the N-terminal clusters caused less pronounced differently directed changes in thermal stability of the protein. The substitutions of F172, W156, and K119 in C-terminal domain of recoverin together with substitution of Q46 in its N-terminal domain provoked significant but diverse changes in free energy associated with Ca2+ binding to the protein: the mutant K119A demonstrated significantly improved calcium binding, whereas F172A and W156A showed decrease in the calcium affinity and Q46A exhibited no ion coordination in one of the Ca2+-binding sites. The most of the N-terminal clusters mutations suppressed membrane binding of recoverin and its inhibitory activity towards rhodopsin kinase (GRK1). Surprisingly, the mutant W156A aberrantly activated rhodopsin phosphorylation regardless of the presence of calcium. Taken together, these data confirm the scaffolding function of several cluster-forming residues and point to their critical role in supporting physiological activity of recoverin.

Revisiting the structure of a synthetic somatostatin analogue for peptide drug design

Natural or artificially manufactured peptides attract scientific interest worldwide owing to their wide array of pharmaceutical and biological activities. X-ray structural studies are used to provide a precise extraction of information, which can be used to enable a better understanding of the function and physicochemical characteristics of peptides. Although it is vulnerable to disassociation, one of the most vital human peptide hormones, somatostatin, plays a regulatory role in the endocrine system as well as in the release of numerous secondary hormones. This study reports the successful crystallization and complete structural model of octreotide, a stable octapeptide analogue of somatostatin. Common obstacles in crystallographic studies arising from the intrinsic difficulties of obtaining a suitable single-crystal specimen were efficiently overcome as polycrystalline material was employed for synchrotron and laboratory X-ray powder diffraction (XPD) measurements. Data collection and preliminary analysis led to the identification of unit-cell symmetry [orthorhombic, P212121, a = 18.5453 (15), b = 30.1766 (25), c = 39.798 (4) Å], a process which was later followed by complete structure characterization and refinement, underlying the efficacy of the suggested (XPD) approach.

PDB2INS: bridging the gap between small-molecule and macromolecular refinement

The open-source Python program PDB2INS is designed to prepare a .ins file for refinement with SHELXL [Sheldrick (2015). Acta Cryst. C71, 3-8], taking atom coordinates and other information from a Protein Data Bank (PDB)-format file. If PDB2INS is provided with a four-character PDB code, both the PDB file and the accompanying mmCIF-format reflection data file (if available) are accessed via the internet from the PDB public archive [Read et al. (2011). Structure, 19, 1395-1412] or optionally from the PDB_REDO server [Joosten, Long, Murshudov & Perrakis (2014). IUCrJ, 1, 213-220]. The SHELX-format .ins (refinement instructions and atomic coordinates) and .hkl (reflection data) files can then be generated without further user intervention, appropriate restraints etc. being added automatically. PDB2INS was tested on the 23 974 X-ray structures deposited in the PDB between 2008 and 2018 that included reflection data to 1.7 Å or better resolution in a recognizable format. After creating the two input files for SHELXL without user intervention, ten cycles of conjugate-gradient least-squares refinement were performed. For 96% of these structures PDB2INS and SHELXL completed successfully without error messages.

Analyzing the structural and functional roles of residues from the 'black' and 'gray' clusters of human S100P protein

Two highly conserved structural motifs observed in members of the EF-hand family of calcium binding proteins. The motifs provide a supporting scaffold for the Ca2+ binding loops and contribute to the hydrophobic core of the EF-hand domain. Each structural motif represents a cluster of three amino acids called cluster I ('black' cluster) and cluster II ('grey' cluster). Cluster I is more conserved and mostly incorporates aromatic amino acids. In contrast, cluster II is noticeably less conserved and includes a mix of aromatic, hydrophobic, and polar amino acids of different sizes. In the human calcium binding S100 P protein, these 'black' and 'gray' clusters include residues F15, F71, and F74 and L33, L58, and K30, respectively. To evaluate the effects of these clusters on structure and functionality of human S100 P, we have performed Ala scanning. The resulting mutants were studied by a multiparametric approach that included circular dichroism, scanning calorimetry, dynamic light scattering, chemical crosslinking, and fluorescent probes. Spectrofluorimetric Ca2+-titration of wild type S100 P showed that S100 P dimer has 1-2 strong calcium binding sites (K₁ = 4 × 106 M^-1) and two cooperative low affinity (K₂ = 4 × 104 M^-1) binding sites. Similarly, the S100 P mutants possess two types of calcium binding sites. This analysis revealed that the alanine substitutions in the clusters I and II caused comparable changes in the S100 P functional properties. However, analysis of heat- or GuHCl-induced unfolding of these proteins showed that the alanine substitutions in the cluster I caused notably more pronounced decrease in the protein stability compared to the changes caused by alanine substitutions in the cluster II. Opposite to literature data, the F15 A substitution did not cause the S100 P dimer dissociation, indicating that F15 is not crucial for dimer stability. Overall, similar to parvalbumins, the S100 P cluster I is more important for protein conformational stability than the cluster II.

Characterization of the Ca2+-coordination structures of L- and T-plastins in combination with their synthetic peptide analogs by FTIR spectroscopy

FTIR spectroscopy was employed to characterize the coordination structures of divalent cations (M2+ = Ca2+ or Mg2+) bound by L- and T-plastins, which contain two EF-hand motifs. We focused on the N-terminal headpieces in the L- and T-plastins to analyze the regions of COO- stretching and amide-I in solution. The spectral profiles indicated that these headpieces have EF-hand calcium-binding sites because bands at 1551 cm-1 and 1555 cm-1 were observed for the bidentate coordination mode of Glu at the 12th position of the Ca2+-binding site of Ca2+-loaded L-plastin and T-plastin, respectively. The amide-I profile of the Mg2+-loaded L-plastin headpiece was identical with that of the apo L-plastin headpiece, meaning that L-plastin has a lower affinity for Mg2+. The amide-I profiles for apo, Mg2+-loaded and Ca2+-loaded T-plastin suggested that aggregation was generated in protein solution at a concentration of 1 mM. The implications of the FTIR spectral data for these plastin headpieces are discussed on the basis of data obtained for synthetic peptide analogs corresponding to the Ca2+-binding site.

Comprehensive analysis of the roles of 'black' and 'gray' clusters in structure and function of rat β-parvalbumin

Recently we found two highly conserved structural motifs in the proteins of the EF-hand calcium binding protein family. These motifs provide a supporting scaffold for the Ca²⁺ binding loops and contribute to the hydrophobic core of the EF-hand domain. Each structural motif forms a cluster of three amino acids called cluster I ('black' cluster) and cluster II ('grey' cluster). Cluster I is much more conserved and mostly incorporates aromatic amino acids. In contrast, cluster II includes a mix of aromatic, hydrophobic, and polar amino acids. The 'black' and 'gray' clusters in rat β-parvalbumin consist of F48, A100, F103 and G61, L64, M87, respectively. In the present work, we sequentially substituted these amino acids residues by Ala, except Ala100, which was substituted by Val. Physical properties of the mutants were studied by circular dichroism, scanning calorimetry, dynamic light scattering, chemical crosslinking, and fluorescent probe methods. The Ca²⁺ and Mg²⁺ binding affinities of these mutants were evaluated by intrinsic fluorescence and equilibrium dialysis methods. In spite of a rather complicated pattern of contributions of separate amino acid residues of the 'black' and 'gray' clusters into maintenance of rat β-parvalbumin structural and functional status, the alanine substitutions in the cluster I cause noticeably more pronounced changes in various structural parameters of proteins, such as hydrodynamic radius of apo-form, thermal stability of Ca²⁺/Mg²⁺-loaded forms, and total energy of Ca²⁺ binding in comparison with the changes caused by amino acid substitutions in the cluster II. These findings were further supported by the outputs of computational analysis of the effects of these mutations on the intrinsic disorder predisposition of rat β-parvalbumin, which also indicated that local intrinsic disorder propensities and the overall levels of predicted disorder were strongly affected by mutations in the cluster I, whereas mutations in cluster II had less pronounced effects. These results demonstrate that amino acids of the cluster I provide more essential contribution to the maintenance of structuraland functional properties of the protein in comparison with the residues of the cluster II.

Structural and functional diversity of EF-hand proteins: Evolutionary perspectives

We have classified 865 sequences of EF-hand proteins from five proteomes into 156 subfamilies. These subfamilies were put into six groups. Evolutionary relationships among subfamilies and groups were analyzed from the inferred ancestral sequence for each subfamily. CTER, CPV, and PEF groups arose from a common EF-lobe (pair of adjacent EF-hands). They have two or more EF-lobes; the relative positions of their EF-lobes differ from each other. Comparisons of the ancestral sequences and the inferred structures of the EF-lobes of these groups indicate that the mutual positions of EF-lobes were established soon after divergence of an EF-lobe for each group and before the duplication and fusion of EF-lobe gene(s). These ancestral sequences reveal that some subfamilies in low similarity and isolated groups did not evolve from the EF-lobe precursor, even if their conformations are similar to the canonical EF-hand. This is an example of convergent evolution.

Polder maps: improving OMIT maps by excluding bulk solvent

The crystallographic maps that are routinely used during the structure-solution workflow are almost always model-biased because model information is used for their calculation. As these maps are also used to validate the atomic models that result from model building and refinement, this constitutes an immediate problem: anything added to the model will manifest itself in the map and thus hinder the validation. OMIT maps are a common tool to verify the presence of atoms in the model. The simplest way to compute an OMIT map is to exclude the atoms in question from the structure, update the corresponding structure factors and compute a residual map. It is then expected that if these atoms are present in the crystal structure, the electron density for the omitted atoms will be seen as positive features in this map. This, however, is complicated by the flat bulk-solvent model which is almost universally used in modern crystallographic refinement programs. This model postulates constant electron density at any voxel of the unit-cell volume that is not occupied by the atomic model. Consequently, if the density arising from the omitted atoms is weak then the bulk-solvent model may obscure it further. A possible solution to this problem is to prevent bulk solvent from entering the selected OMIT regions, which may improve the interpretative power of residual maps. This approach is called a polder (OMIT) map. Polder OMIT maps can be particularly useful for displaying weak densities of ligands, solvent molecules, side chains, alternative conformations and residues both in terminal regions and in loops. The tools described in this manuscript have been implemented and are available in PHENIX.

Infrared study of synthetic peptide analogues of the calcium-binding site III of troponin C: The role of helix F of an EF-hand motif

The EF-hand motif (helix-loop-helix) is a Ca(2+)-binding domain that is common among many intracellular Ca(2+)-binding proteins. We applied Fourier-transform infrared spectroscopy to study the synthetic peptide analogues of site III of rabbit skeletal muscle troponin C (helix E-loop-helix F). The 17-residue peptides corresponding to loop-helix F (DRDADGYIDAEELAEIF), where one residue is substituted by the D-type amino acid, were investigated to disturb the α-helical conformation of helix F systematically. These D-type-substituted peptides showed no band at about 1555 cm(-1) even in the Ca(2+)-loaded state although the native peptide (L-type only) showed a band at about 1555 cm(-1) in the Ca(2+)-loaded state, which is assigned to the side-chain COO(-) group of Glu at the 12th position, serving as the ligand for Ca(2+) in the bidentate coordination mode. Therefore, helix F is vital to the interaction between the Ca(2+) and the side-chain COO(-) group of Glu at the 12th position. Implications of the COO(-) antisymmetric stretch and the amide-I' of the synthetic peptide analogues of the Ca(2+)-binding sites are discussed.

Association between S100B Levels and Long-Term Outcome after Aneurysmal Subarachnoid Hemorrhage: Systematic Review and Pooled Analysis

S100 calcium binding protein B (S100B), a well-studied marker for neurologic injury, has been suggested as a candidate for predicting outcome after subarachnoid hemorrhage. We performed a pooled analysis summarizing the associations between S100B protein in serum and cerebrospinal fluid (CSF) with radiographic vasospasm, delayed ischemic neurologic deficit (DIND), delayed cerebral infarction, and Glasgow Outcome Scale (GOS) outcome. A literature search using PubMed, the Cochrane Library, and the EMBASE databases was performed to identify relevant studies published up to May 2015. The weighted Stouffer's Z method was used to perform a pooled analysis of outcome measures with greater than three studies. A total of 13 studies were included in this review. Higher serum S100B level was found to be associated with cerebral infarction as diagnosed by CT (padj = 3.1 x 10(-4)) and worse GOS outcome (padj = 5.5 x 10(-11)). There was no association found between serum and CSF S100B with radiographic vasospasm or DIND. S100B is a potential prognostic marker for aSAH outcome.

The solvent component of macromolecular crystals

The mother liquor from which a biomolecular crystal is grown will contain water, buffer molecules, native ligands and cofactors, crystallization precipitants and additives, various metal ions, and often small-molecule ligands or inhibitors. On average, about half the volume of a biomolecular crystal consists of this mother liquor, whose components form the disordered bulk solvent. Its scattering contributions can be exploited in initial phasing and must be included in crystal structure refinement as a bulk-solvent model. Concomitantly, distinct electron density originating from ordered solvent components must be correctly identified and represented as part of the atomic crystal structure model. Herein, are reviewed (i) probabilistic bulk-solvent content estimates, (ii) the use of bulk-solvent density modification in phase improvement, (iii) bulk-solvent models and refinement of bulk-solvent contributions and (iv) modelling and validation of ordered solvent constituents. A brief summary is provided of current tools for bulk-solvent analysis and refinement, as well as of modelling, refinement and analysis of ordered solvent components, including small-molecule ligands.

An approach to creating a more realistic working model from a protein data bank entry

An accurate model of three-dimensional protein structure is important in a variety of fields such as structure-based drug design and mechanistic studies of enzymatic reactions. While the entries in the Protein Data Bank ( http://www.pdb.org ) provide valuable information about protein structures, a small fraction of the PDB structures were found to contain anomalies not reported in the PDB file. The semiempirical PM7 method in MOPAC2012 was used for identifying anomalously short hydrogen bonds, C-H⋯O/C-H⋯N interactions, non-bonding close contacts, and unrealistic covalent bond lengths in recently published Protein Data Bank files. It was also used to generate new structures with these faults removed. When the semiempirical models were compared to those of PDB_REDO (http://www.cmbi.ru.nl/pdb_redo/), the clashscores, as defined by MolProbity ( http://molprobity.biochem.duke.edu/), were better in about 50% of the structures. The semiempirical models also had a lower root-mean-square-deviation value in nearly all cases than those from PDB_REDO, indicative of a better conservation of the tertiary structure. Finally, the semiempirical models were found to have lower clashscores than the initial PDB file in all but one case. Because this approach maintains as much of the original tertiary structure as possible while improving anomalous interactions, it should be useful to theoreticians, experimentalists, and crystallographers investigating the structure and function of proteins.

Polyketide glycosides from Bionectria ochroleuca inhibit Candida albicans biofilm formation

One of the challenges presented by Candida infections is that many of the isolates encountered in the clinic produce biofilms, which can decrease these pathogens' susceptibilities to standard-of-care antibiotic therapies. Inhibitors of fungal biofilm formation offer a potential solution to counteracting some of the problems associated with Candida infections. A screening campaign utilizing samples from our fungal extract library revealed that a Bionectria ochroleuca isolate cultured on Cheerios breakfast cereal produced metabolites that blocked the in vitro formation of Candida albicans biofilms. A scale-up culture of the fungus was undertaken using mycobags (also known as mushroom bags or spawn bags), which afforded four known [TMC-151s C-F (1-4)] and three new [bionectriols B-D (5-7)] polyketide glycosides. All seven metabolites exhibited potent biofilm inhibition against C. albicans SC5314, as well as exerted synergistic antifungal activities in combination with amphotericin B. In this report, we describe the structure determination of the new metabolites, as well as compare the secondary metabolome profiles of fungi grown in flasks and mycobags. These studies demonstrate that mycobags offer a useful alternative to flask-based cultures for the preparative production of fungal secondary metabolites.

Insights into the relationship between the haem-binding pocket and the redox potential ofc6cytochromes: four atomic resolution structures ofc6andc6-like proteins fromSynechococcussp. PCC 7002

The structure of cytochromec6Cfrom the mesophilic cyanobacteriumSynechococcussp. PCC 7002 has been determined at 1.03 Å resolution. This is the first structural report on the recently discovered cyanobacterial cytochromec6-like proteins found in marine and nitrogen-fixing cyanobacteria. Despite high similarity in the overall three-dimensional fold between cytochromesc6andc6C, the latter shows saliently different electrostatic properties in terms of surface charge distribution and dipole moments. Its midpoint redox potential is less than half of the value for typicalc6cytochromes and results mainly from the substitution of one residue in the haem pocket. Here, high-resolution crystal structures of mutants of both cytochromesc6andc6Care presented, and the impact of the mutation of specific residues in the haem-binding pocket on the redox potential is discussed. These findings contribute to the elucidation of the structure–function relationship ofc6-like cytochromes.

Structure of a proteolytically resistant analogue of (NLys)5SFTI-1 in complex with trypsin: evidence for the direct participation of the Ser214 carbonyl group in serine protease-mediated proteolysis

Peptide-peptoid hybrids are found to be potent inhibitors of serine proteases. These engineered peptidomimetics benefit from both types of units of the biopolymeric structure: the natural inhibitor part serves as a good binding template, while the P1-positioned peptoid component provides complete resistance towards proteolysis. In this report, the mechanism of proteolytic resistance of a P1 peptoid-containing analogue is postulated based on the crystal structure of the (NLys)(5)-modified sunflower trypsin inhibitor SFTI-1 in complex with bovine trypsin solved at 1.29 Å resolution. The structural differences between the (NLys)(5)SFTI-1-trypsin complex and the native SFTI-1-trypsin complex are surprisingly small and reveal the key role of the carbonyl group of the Ser214 residue of the enzyme, which is crucial for binding of the inhibitor and plays a crucial role in proteolysis mediated by serine proteases. The incorporated NLys5 peptoid residue prevents Ser214 from forming a hydrogen bond to the P1 residue, and in turn Gln192 does not form a hydrogen bond to the carbonyl group of the P2 residue. It also increases the distance between the Ser214 carbonyl group and the Ser195 residue, thus preventing proteolysis. The hybrid inhibitor structure reported here provides insight into protein-protein interaction, which can be efficiently and selectively probed with the use of peptoids incorporated within endogenous peptide ligands.

Functions of S100 proteins

The S100 protein family consists of 24 members functionally distributed into three main subgroups: those that only exert intracellular regulatory effects, those with intracellular and extracellular functions and those which mainly exert extracellular regulatory effects. S100 proteins are only expressed in vertebrates and show cell-specific expression patterns. In some instances, a particular S100 protein can be induced in pathological circumstances in a cell type that does not express it in normal physiological conditions. Within cells, S100 proteins are involved in aspects of regulation of proliferation, differentiation, apoptosis, Ca2+ homeostasis, energy metabolism, inflammation and migration/invasion through interactions with a variety of target proteins including enzymes, cytoskeletal subunits, receptors, transcription factors and nucleic acids. Some S100 proteins are secreted or released and regulate cell functions in an autocrine and paracrine manner via activation of surface receptors (e.g. the receptor for advanced glycation end-products and toll-like receptor 4), G-protein-coupled receptors, scavenger receptors, or heparan sulfate proteoglycans and N-glycans. Extracellular S100A4 and S100B also interact with epidermal growth factor and basic fibroblast growth factor, respectively, thereby enhancing the activity of the corresponding receptors. Thus, extracellular S100 proteins exert regulatory activities on monocytes/macrophages/microglia, neutrophils, lymphocytes, mast cells, articular chondrocytes, endothelial and vascular smooth muscle cells, neurons, astrocytes, Schwann cells, epithelial cells, myoblasts and cardiomyocytes, thereby participating in innate and adaptive immune responses, cell migration and chemotaxis, tissue development and repair, and leukocyte and tumor cell invasion.

On the reproducibility of protein crystal structures: five atomic resolution structures of trypsin

Structural studies of proteins usually rely on a model obtained from one crystal. By investigating the details of this model, crystallographers seek to obtain insight into the function of the macromolecule. It is therefore important to know which details of a protein structure are reproducible or to what extent they might differ. To address this question, the high-resolution structures of five crystals of bovine trypsin obtained under analogous conditions were compared. Global parameters and structural details were investigated. All of the models were of similar quality and the pairwise merged intensities had large correlation coefficients. The C(α) and backbone atoms of the structures superposed very well. The occupancy of ligands in regions of low thermal motion was reproducible, whereas solvent molecules containing heavier atoms (such as sulfur) or those located on the surface could differ significantly. The coordination lengths of the calcium ion were conserved. A large proportion of the multiple conformations refined to similar occupancies and the residues adopted similar orientations. More than three quarters of the water-molecule sites were conserved within 0.5 Å and more than one third were conserved within 0.1 Å. An investigation of the protonation states of histidine residues and carboxylate moieties was consistent for all of the models. Radiation-damage effects to disulfide bridges were observed for the same residues and to similar extents. Main-chain bond lengths and angles averaged to similar values and were in agreement with the Engh and Huber targets. Other features, such as peptide flips and the double conformation of the inhibitor molecule, were also reproducible in all of the trypsin structures. Therefore, many details are similar in models obtained from different crystals. However, several features of residues or ligands located in flexible parts of the macromolecule may vary significantly, such as side-chain orientations and the occupancies of certain fragments.

Bulk-solvent and overall scaling revisited: faster calculations, improved results

A fast and robust method for determining the parameters for a flat (mask-based) bulk-solvent model and overall scaling in macromolecular crystallographic structure refinement and other related calculations is described. This method uses analytical expressions for the determination of optimal values for various scale factors. The new approach was tested using nearly all entries in the PDB for which experimental structure factors are available. In general, the resulting R factors are improved compared with previously implemented approaches. In addition, the new procedure is two orders of magnitude faster, which has a significant impact on the overall runtime of refinement and other applications. An alternative function is also proposed for scaling the bulk-solvent model and it is shown that it outperforms the conventional exponential function. Similarly, alternative methods are presented for anisotropic scaling and their performance is analyzed. All methods are implemented in the Computational Crystallography Toolbox (cctbx) and are used in PHENIX programs.

Coordination to divalent cations by calcium-binding proteins studied by FTIR spectroscopy

We review the Fourier-transform infrared (FTIR) spectroscopy of side-chain COO(-) groups of Ca(2+)-binding proteins: parvalbumins, bovine calmodulin, akazara scallop troponin C and related calcium binding proteins and peptide analogues. The COO(-) stretching vibration modes can be used to identify the coordination modes of COO(-) groups of Ca(2+)-binding proteins to metal ions: bidentate, unidentate, and pseudo-bridging. FTIR spectroscopy demonstrates that the coordination structure of Mg(2+) is distinctly different from that of Ca(2+) in the Ca(2+)-binding site in solution. The interpretation of COO(-) stretches is ensured on the basis of the spectra of calcium-binding peptide analogues. The implication of COO(-) stretches is discussed for Ca(2+)-binding proteins. This article is part of a Special Issue entitled: FTIR in membrane proteins and peptide studies.

Target binding to S100B reduces dynamic properties and increases Ca(2+)-binding affinity for wild type and EF-hand mutant proteins

Mutations in the second EF-hand (D61N, D63N, D65N, and E72A) of S100B were used to study its Ca(2+) binding and dynamic properties in the absence and presence of a bound target, TRTK-12. With (D63N)S100B as an exception ((D63N)K(D)=50±9 μM), Ca(2+) binding to EF2-hand mutants were reduced by more than 8-fold in the absence of TRTK-12 ((D61N)K(D)=412±67 μM, (D65N)K(D)=968±171 μM, and (E72A)K(D)=471±133 μM), when compared to wild-type protein ((WT)K(D)=56±9 μM). For the TRTK-12 complexes, the Ca(2+)-binding affinity to wild type ((WT+TRTK)K(D)=12±10 μM) and the EF2 mutants was increased by 5- to 14-fold versus in the absence of target ((D61N+TRTK)K(D)=29±1.2 μM, (D63N+TRTK)K(D)=10±2.2 μM, (D65N+TRTK)K(D)=73±4.4 μM, and (E72A+TRTK)K(D)=18±3.7 μM). In addition, R(ex), as measured using relaxation dispersion for side-chain (15)N resonances of Asn63 ((D63N)S100B), was reduced upon TRTK-12 binding when measured by NMR. Likewise, backbone motions on multiple timescales (picoseconds to milliseconds) throughout wild type, (D61N)S100B, (D63N)S100B, and (D65N)S100B were lowered upon binding TRTK-12. However, the X-ray structures of Ca(2+)-bound (2.0Å) and TRTK-bound (1.2Å) (D63N)S100B showed no change in Ca(2+) coordination; thus, these and analogous structural data for the wild-type protein could not be used to explain how target binding increased Ca(2+)-binding affinity in solution. Therefore, a model for how S100B-TRTK-12 complex formation increases Ca(2+) binding is discussed, which considers changes in protein dynamics upon binding the target TRTK-12.

How does hydroxyl introduction influence the double helical structure: the stabilization of an altritol nucleic acid:ribonucleic acid duplex

Altritol nucleic acids (ANAs) are a promising new tool in the development of artificial small interfering ribonucleic acids (siRNAs) for therapeutical applications. To mimic the siRNA:messenger RNA (mRNA) interactions, the crystal structure of the ANA:RNA construct a(CCGUAAUGCC-P):r(GGCAUUACGG) was determined to 1.96 Å resolution which revealed the hybrid to form an A-type helix. As this A-form is a major requirement in the RNAi process, this crystal structure confirms the potential of altritol-modified siRNAs. Moreover, in the ANA strands, a new type of intrastrand interactions was found between the O2' hydroxyl group of one residue and the sugar ring O4' atom of the next residue. These interactions were further investigated by quantum chemical methods. Besides hydration effects, these intrastrand hydrogen bonds may also contribute to the stability of ANA:RNA duplexes.

On the application of structure-specific bulk-solvent models

It is often discussed, mainly in connection with the rather high macromolecular R factors, that the treatment of bulk solvent in macromolecular refinement may lack the detail needed for modelling the solvent environment of molecules as complex as proteins and nucleic acids. This line of thought directly leads to the hypothesis that improvements in the modelling of the bulk solvent may substantially improve the agreement between the experimental data and the crystallographic models. Here, part of this hypothesis is being tested through the construction, via molecular-dynamics simulations, of a highly detailed, physics-based, structure-specific and crystallographic data-agnostic model of the bulk solvent of a known crystal structure. The water-distribution map obtained from the simulation is converted (after imposing space-group symmetry) to a constant (but scalable) partial structure factor which is then added in a re-refinement of the crystal structure. Compared with the simple Babinet-based correction, a reduction of the totally cross-validated free R value by 0.3% is observed. The implications and possible interpretations of these results are discussed.

The crystal structure of the CeNA:RNA hybrid ce(GCGTAGCG):r(CGCUACGC)

Cyclohexenyl nucleic acids (CeNA) are characterised by the carbon-carbon double bond replacing the O4'-oxygen atom of the natural D-2'-deoxyribose sugar ring in DNA. CeNAs exhibit a high conformational flexibility, are stable against nuclease activity and their hybridisation is RNA selective. Additionally, CeNA has been shown to induce an enhanced biological activity when incorporated in siRNA. This makes CeNA a good candidate for siRNA and synthetic aptamer applications. The crystal structure of the synthetic CeNA:RNA hybrid ce(GCGTAGCG):r(CGCUACGC) has been solved with a resolution of 2.50 Å. The CeNA:RNA duplex adopts an anti-parallel, right-handed double helix with standard Watson-Crick base pairing. Analyses of the helical parameters revealed the octamer to form an A-like double helix. The cyclohexenyl rings mainly adopt the (3)H(2) conformation, which resembles the C3'-endo conformation of RNA ribose ring. This C3'-endo ring puckering was found in most of the RNA residues and is typical for A-family helices. The crystal structure is stabilised by the presence of hexahydrated magnesium ions. The fact that the CeNA:RNA hybrid adopts an A-type double helical conformation confirms the high potential of CeNAs for the construction of efficient siRNAs which can be used for therapeutical applications.

A smooth and differentiable bulk-solvent model for macromolecular diffraction

Inclusion of low-resolution data in macromolecular crystallography requires a model for the bulk solvent. Previous methods have used a binary mask to accomplish this, which has proven to be very effective, but the mask is discontinuous at the solute-solvent boundary (i.e. the mask value jumps from zero to one) and is not differentiable with respect to atomic parameters. Here, two algorithms are introduced for computing bulk-solvent models using either a polynomial switch or a smoothly thresholded product of Gaussians, and both models are shown to be efficient and differentiable with respect to atomic coordinates. These alternative bulk-solvent models offer algorithmic improvements, while showing similar agreement of the model with the observed amplitudes relative to the binary model as monitored using R, R(free) and differences between experimental and model phases. As with the standard solvent models, the alternative models improve the agreement primarily with lower resolution (>6 A) data versus no bulk solvent. The models are easily implemented into crystallographic software packages and can be used as a general method for bulk-solvent correction in macromolecular crystallography.

Cadmium-113 magnetic resonance spectroscopy

Cadmium-113 nuclear magnetic resonance spectroscopy has been used in studies of the structure and dynamics of inorganic and bioinorganic molecules. Chemical dynamics play an important role in the analysis of relaxation and chemical shift data. Naïve interpretations of relaxation data can be checked by performing these experiments at a variety of temperatures and magnetic field strengths. A combination of solid- and liquid-state nuclear magnetic resonance measurements can provide the user with unambiguous data on chemical shielding. These data can be used to characterize zinc and calcium ion binding sites in metalloproteins.

Predicting cardiomyopathic phenotypes by altering Ca2+ affinity of cardiac troponin C

Cardiac diseases associated with mutations in troponin subunits include hypertrophic cardiomyopathy (HCM), dilated cardiomyopathy (DCM), and restrictive cardiomyopathy (RCM). Altered calcium handling in these diseases is evidenced by changes in the Ca(2+) sensitivity of contraction. Mutations in the Ca(2+) sensor, troponin C (TnC), were generated to increase/decrease the Ca(2+) sensitivity of cardiac skinned fibers to create the characteristic effects of DCM, HCM, and RCM. We also used a reconstituted assay to determine the mutation effects on ATPase activation and inhibition. One mutant (A23Q) was found with HCM-like properties (increased Ca(2+) sensitivity of force and normal levels of ATPase inhibition). Three mutants (S37G, V44Q, and L48Q) were identified with RCM-like properties (a large increase in Ca(2+) sensitivity, partial loss of ATPase inhibition, and increased basal force). Two mutations were identified (E40A and I61Q) with DCM properties (decreased Ca(2+) sensitivity, maximal force recovery, and activation of the ATPase at high [Ca(2+)]). Steady-state fluorescence was utilized to assess Ca(2+) affinity in isolated cardiac (c)TnCs containing F27W and did not necessarily mirror the fiber Ca(2+) sensitivity. Circular dichroism of mutant cTnCs revealed a trend where increased alpha-helical content correlated with increased Ca(2+) sensitivity in skinned fibers and vice versa. The main findings from this study were as follows: 1) cTnC mutants demonstrated distinct functional phenotypes reminiscent of bona fide HCM, RCM, and DCM mutations; 2) a region in cTnC associated with increased Ca(2+) sensitivity in skinned fibers was identified; and 3) the F27W reporter mutation affected Ca(2+) sensitivity, maximal force, and ATPase activation of some mutants.

In-house characterization of protein powder

X-ray powder diffraction patterns of lysozyme and insulin were recorded on a standard in-house powder diffractometer. The experimental powder diffraction patterns were compared with patterns calculated from Protein Data Bank coordinate data. Good agreement was obtained by including straightforward corrections for background, unit-cell parameters, disordered bulk solvent and geometric factors. In particular the solvent correction was found crucial for a good agreement. A revised Lorentz factor was derived, which gave a minor, but significant, improvement to the fit in the low-angle region. An attempt to include calculated H-atom positions did not improve the overall fit and was abandoned. The method devised was shown to be a quick and convenient tool for distinguishing precipitates and polymorphs of proteins.

A comparative analysis of parvalbumin expression in pinfish (Lagodon rhomboides) and toadfish (Opsanus sp.)

This study examines the role of a myoplasmic protein, parvalbumin, in enhancing muscle relaxation by fishes. Parvalbumin is thought to bind free Ca(2+) during muscle contraction, thereby reducing intracellular [Ca(2+)] in muscle and speeding muscle relaxation by reducing Ca(2+) availability to the troponin complex. We hypothesized that parvalbumin expression is ubiquitously expressed in fish muscle and that its expression levels and role in muscle relaxation would depend on the activity level and the thermal environment of a given fish species. Muscle contractile properties and patterns of parvalbumin expression were examined in pinfish (Lagodon rhomboides) and two species of toadfish (gulf toadfish, Opsanus beta, and oyster toadfish, Opsanus tau). Unlike another sparid (sheepshead), the active swimming pinfish does not express parvalbumin in its slow-twitch red muscle. However, both sheepshead and pinfish have relatively high levels of parvalbumin in their myotomal white muscle. Gulf toadfish from the Gulf of Mexico expressed higher levels of parvalbumin and had faster muscle relaxation rates than oyster toadfish from more northern latitudes. The faster muscle of gulf toadfish also expressed relatively more of one parvalbumin isoform, suggesting differences in the binding properties of the two isoforms observed in toadfish swimming muscle. Parvalbumin expression and its role in muscle relaxation appear to vary widely in fishes. There are many control points involved in the calcium transient of contracting muscle, leading to a variety of species-specific solutions to the modulation of muscle relaxation.

A single EF-hand isolated from STIM1 forms dimer in the absence and presence of Ca2+

Stromal interaction molecule 1 (STIM1) is responsible for activating the Ca(2+) release-activated Ca(2+) (CRAC) channel by first sensing the changes in Ca(2+) concentration in the endoplasmic reticulum ([Ca(2+)](ER)) via its luminal canonical EF-hand motif and subsequently oligomerizing to interact with the CRAC channel pore-forming subunit Orai1. In this work, we applied a grafting approach to obtain the intrinsic metal-binding affinity of the isolated EF-hand of STIM1, and further investigated its oligomeric state using pulsed-field gradient NMR and size-exclusion chromatography. The canonical EF-hand bound Ca(2+) with a dissociation constant at a level comparable with [Ca(2+)](ER) (512 +/- 15 microm). The binding of Ca(2+) resulted in a more compact conformation of the engineered protein. Our results also showed that D to A mutations at Ca(2+)-coordinating loop positions 1 and 3 of the EF-hand from STIM1 led to a 15-fold decrease in the metal-binding affinity, which explains why this mutant was insensitive to changes in Ca(2+) concentration in the endoplasmic reticulum ([Ca(2+)](ER)) and resulted in constitutive punctae formation and Ca(2+) influx. In addition, the grafted single EF-hand motif formed a dimer regardless of the presence of Ca(2+), which conforms to the EF-hand paring paradigm. These data indicate that the STIM1 canonical EF-hand motif tends to dimerize for functionality in solution and is responsible for sensing changes in [Ca(2+)](ER).

Averaged kick maps: less noise, more signal... and probably less bias

Use of reliable density maps is crucial for rapid and successful crystal structure determination. Here, the averaged kick (AK) map approach is investigated, its application is generalized and it is compared with other map-calculation methods. AK maps are the sum of a series of kick maps, where each kick map is calculated from atomic coordinates modified by random shifts. As such, they are a numerical analogue of maximum-likelihood maps. AK maps can be unweighted or maximum-likelihood (sigma(A)) weighted. Analysis shows that they are comparable and correspond better to the final model than sigma(A) and simulated-annealing maps. The AK maps were challenged by a difficult structure-validation case, in which they were able to clarify the problematic region in the density without the need for model rebuilding. The conclusion is that AK maps can be useful throughout the entire progress of crystal structure determination, offering the possibility of improved map interpretation.

A functional and structural study of troponin C mutations related to hypertrophic cardiomyopathy

Recently four new hypertrophic cardiomyopathy mutations in cardiac troponin C (cTnC) (A8V, C84Y, E134D, and D145E) were reported, and their effects on the Ca(2+) sensitivity of force development were evaluated (Landstrom, A. P., Parvatiyar, M. S., Pinto, J. R., Marquardt, M. L., Bos, J. M., Tester, D. J., Ommen, S. R., Potter, J. D., and Ackerman, M. J. (2008) J. Mol. Cell. Cardiol. 45, 281-288). We performed actomyosin ATPase and spectroscopic solution studies to investigate the molecular properties of these mutations. Actomyosin ATPase activity was measured as a function of [Ca(2+)] utilizing reconstituted thin filaments (TFs) with 50% mutant and 50% wild type (WT) and 100% mutant cardiac troponin (cTn) complexes: A8V, C84Y, and D145E increased the Ca(2+) sensitivity with only A8V demonstrating lowered Ca(2+) sensitization at the 50% ratio when compared with 100%; E134D was the same as WT at both ratios. Of these four mutants, only D145E showed increased ATPase activation in the presence of Ca(2+). None of the mutants affected ATPase inhibition or the binding of cTn to the TF measured by co-sedimentation. Only D145E increased the Ca(2+) affinity of site II measured by 2-(4'-(2''-iodoacetamido)phenyl)aminonaphthalene-6-sulfonic acid fluorescence in isolated cTnC or the cTn complex. In the presence of the TF, only A8V was further sensitized to Ca(2+). Circular dichroism measurements in different metal-bound states of the isolated cTnCs showed changes in the secondary structure of A8V, C84Y, and D145E, whereas E134D was the same as WT. PyMol modeling of each cTnC mutant within the cTn complex revealed potential for local changes in the tertiary structure of A8V, C84Y, and D145E. Our results indicate that 1) three of the hypertrophic cardiomyopathy cTnC mutants increased the Ca(2+) sensitivity of the myofilament; 2) the effects of the mutations on the Ca(2+) affinity of isolated cTnC, cTn, and TF are not sufficient to explain the large Ca(2+) sensitivity changes seen in reconstituted and fiber assays; and 3) changes in the secondary structure of the cTnC mutants may contribute to modified protein-protein interactions along the sarcomere lattice disrupting the coupling between the cross-bridge and Ca(2+) binding to cTnC.

Redox properties and crystal structures of a Desulfovibrio vulgaris flavodoxin mutant in the monomeric and homodimeric forms

The mutant S64C of the short-chain flavodoxin from Desulfovibrio vulgaris has been designed to introduce an accessible and reactive group on the protein surface. Crystals have been obtained of both the monomeric and homodimeric forms of the protein, with the cofactor FMN in either the oxidized or the one electron-reduced (semiquinone) state, and the structures have been determined to high resolution. The redox properties of the different species have been investigated and the variations observed with respect to wild type have been related to the structural changes induced by the mutation and S-S bridge formation.

Sequence microheterogeneity of parvalbumin pI 5.0 of pike: a mass spectrometric study

Parvalbumin (PA) is a muscle and neuronal calcium-binding protein, the major fish and frog allergen. Its characteristic feature is the presence of multiple isoforms with significantly different amino acid sequences. Here we show that the major isoform of northern pike muscle PA (pI 5.0, alpha-PA) exhibits microheterogeneity of amino acid sequence. ESI Q-TOF mass-spectrometry (MS) analysis of alpha-PA sample showed the presence of two components with mass difference of 71 Da. Analysis of tryptic and endoproteinase Asp-N digests of alpha-PA by MALDI-TOF MS revealed peptides, corresponding to two different amino acid sequences. The sequence differences between variant proteins are limited to AB-domain and include substitutions K27A and L31K, and an extra Leu residue between K11 and K12. Since the affected residues comprise a cluster on the surface of PA, an involvement of the identified region into target recognition is suggested. The substitutions at positions 27 and 31 are located in the region of previously identified epitopes of parvalbumin relevant for PA-specific IgE and IgG binding, which suggests different immunoactivities of the variants. The found microheterogeneity of PA is suggested to be of importance for physiological adaptation of the propulsive musculature to developmental and/or environmental requirements and may contribute to PA allergenicity.

Apo-parvalbumin as an intrinsically disordered protein

Recently defined family of intrinsically disordered proteins (IDP) includes proteins lacking rigid tertiary structure meanwhile fulfilling essential biological functions. Here we show that apo-state of pike parvalbumin (alpha- and beta-isoforms, pI 5.0 and 4.2, respectively) belongs to the family of IDP, which is in accord with theoretical predictions. Parvalbumin (PA) is a 12-kDa calcium-binding protein involved into regulation of relaxation of fast muscles. Differential scanning calorimetry measurements of metal-depleted form of PA revealed the absence of any thermally induced transitions with measurable denaturation enthalpy along with elevated specific heat capacity, implying the lack of rigid tertiary structure and exposure of hydrophobic protein groups to the solvent. Calcium removal from the PAs causes more than 10-fold increase in fluorescence intensity of hydrophobic probe bis-ANS and is accompanied by a decrease in alpha-helical content and a marked increase in mobility of aromatic residues environment, as judged by circular dichroism spectroscopy (CD). Guanidinium chloride-induced unfolding of the apo-parvalbumins monitored by CD showed the lack of fixed tertiary structure. Theoretical estimation of energetics of the charge-charge interactions in the PAs indicated their pronounced destabilization upon calcium removal, which is in line with sequence-based predictions of disordered protein chain regions. Far-UV CD studies of apo-alpha-PA revealed hallmarks of cold denaturation of the protein at temperatures below 20 degrees C. Moreover, a cooperative thermal denaturation transition with mid-temperature at 10-15 degrees C is revealed by near-UV CD for both PAs. The absence of detectable enthalpy change in this temperature region suggests continuous nature of the transition. Overall, the theoretical and experimental data obtained show that PA in apo-state is essentially disordered nevertheless demonstrates complex denaturation behavior. The native rigid tertiary structure of PA is attained upon association of one (alpha-PA) or two (beta-PA) calcium ions per protein molecule, as follows from calorimetric and calcium titration data.

Infrared spectroscopic study of the metal-coordination structures of calcium-binding proteins

Carboxylate (COO(-)) groups can coordinate to metal ions in of the following four modes: 'unidentate', 'bidentate', 'bridging' and 'pseudo-bridging' modes. COO(-) stretching frequencies provide information about the coordination modes of COO(-) groups to metal ions. We review the Fourier-transform infrared spectroscopy (FTIR) of side-chain COO(-) groups of Ca(2+)-binding proteins: pike parvalbumin pI 4.10, bovine calmodulin and Akazara scallop troponin C. FTIR spectroscopy of Akazara scallop troponin C has demonstrated that the coordination structure of Mg(2+) is distinctly different from that of Ca(2+) in the Ca(2+)-binding site. The assignments of the COO(-) antisymmetric stretch have been ensured on the basis of the spectra of calcium-binding peptide analogues. The downshift of the COO(-) antisymmetric stretching mode from 1565 cm(-1) to 1555-1540 cm(-1) upon Ca(2+) binding is a commonly observed feature of FTIR spectra for EF-hand proteins.

Influence of the incorporation of a cyclohexenyl nucleic acid (CeNA) residue onto the sequence d(CGCGAATTCGCG)

Cyclohexene nucleic acids (CeNA), which are characterized by the presence of a cyclohexene moiety instead of a natural (deoxy)ribose sugar, are known to increase the thermal and enzymatic stability when incorporated in RNA oligonucleotides. As it has been demonstrated that even a single cyclohexenyl nucleoside, when incorporated in an oligonucleotide, can have a profound effect on the biological activity of the oligonucleotide, further research is warranted to study the complex of such oligonucleotides with target proteins. In order to analyse the influence of CeNA residues onto the helix conformation and hydration of natural nucleic acid structures, a cyclohexenyl-adenine building block (xAr) was incorporated into the Dickerson sequence CGCGA(xAr)TTCGCG. The crystal structure of this sequence determined to a resolution of 1.90 A. The global helix belongs to the B-type family and shows a water spine, which is partially broken up by the apolar cyclohexene residue. The cyclohexene ring adopts the (2)E-conformation allowing a better incorporation of the residue in the dodecamer sequence. The crystal packing is stabilized by cobalt hexamine residues and belongs to space group P222(1), never before reported for nucleic acids.